Composition, molecular structure, and physicochemical properties of tuber and root starches: a review

Starch-based biodegradable films amended with nano-starch and tannic acid-coated nano-starch exhibit enhanced mechanical and functional attributes with antimicrobial activity

Starch-based biofilms are biodegradable, but their application is limited by lower mechanical strength and absence of antimicrobial properties. In this context, the present study attempted to unleash the potential of nanotechnology for synthesizing nano-starch (NS) and tannic acid-coated nano-starch (T-NS) for augmenting the tensile strength and antimicrobial properties of starch-based biofilms. Moreover, this study reports one of the first such attempts to improve the commercial viability of starch extracted from the corms of Amorphophallus paeoniifolius. In this study, NS and T-NS samples were first synthesized by the physical and chemical modification of the native starch (S) molecules. The NS and T-NS samples showed significantly smaller granule size, lower moisture content, and swelling power. Further, amendments with NS and T-NS samples (25 % and 50 %) to the native starch molecules were performed to obtain biofilm samples. The NSB (NS amended) and T-NSB (T-NS amended) biofilms showed comparatively higher tensile strength than SB films (100 % starch-based). The T-NSB showed greater antimicrobial activity against gram-positive and gram-negative bacteria. All the biofilms showed almost complete biodegradation in soil (in 10 days). Therefore, it can be concluded that additives like NS and T-NS can improve starch-based biofilms' mechanical strength and antimicrobial properties with considerable biodegradability.

Recent advances in the impact of gelatinization degree on starch: Structure, properties and applications

During home cooking or industrial food processing operations, starch granules usually undergo a process known as gelatinization. The starch gelatinization degree (DG) influences the structural organization and properties of starch, which in turn alters the physicochemical, organoleptic, and gastrointestinal properties of starchy foods. This review summarizes methods for measuring DG, as well as the impact of DG on the starch structure, properties, and applications. Enzymatic digestion, iodine colorimetry, and differential scanning calorimetry are the most common methods for evaluating the DG. As the DG increases, the structural organization of the molecules within starch granules is progressively disrupted, the particle size of the granules is altered due to swelling and then disruption, the crystallinity is decreased, the molecular weight is reduced, and the starch-lipid complexes are formed. The impact of DG on the starch structure and properties depends on the processing method, operating conditions, and starch source. The starch DG affects the quality of many foods, including baked goods, fried foods, alcoholic beverages, emulsified foods, and edible inks. Thus, a better understanding of the changes in starch structure and function caused by gelatinization could facilitate the development of foods with novel or improved properties.

Starch granule size and shape characterization of yam (Dioscorea alata L.) flour using automated image analysis

BACKGROUND

Roots, tubers and bananas (RTB) play an essential role as staple foods, particularly in Africa. Consumer acceptance for RTB products relies strongly on the functional properties of, which may be affected by the size and shape of its granules. Classically, these are characterized either using manual measurements on microscopic photographs of starch colored with iodine, or using a laser light-scattering granulometer (LLSG). While the former is tedious and only allows the analysis of a small number of granules, the latter only provides limited information on the shape of the starch granule.

RESULTS

In this study, an open-source solution was developed allowing the automated measurement of the characteristic parameters of the size and shape of yam starch granules by applying thresholding and object identification on microscopic photographs. A random forest (RF) model was used to predict the starch granule shape class. This analysis pipeline was successfully applied to a yam diversity panel of 47 genotypes, leading to the characterization of more than 205 000 starch granules. Comparison between the classical and automated method shows a very strong correlation (R2 = 0.99) and an absence of bias for granule size. The RF model predicted shape class with an accuracy of 83%. With heritability equal to 0.85, the median projected area of the granules varied from 381 to 1115 μm2 and their observed shapes were ellipsoidal, polyhedral, round and triangular.

CONCLUSION

The results obtained in this study show that the proposed open-source pipeline offers an accurate, robust and discriminating solution for medium-throughput phenotyping of yam starch granule size distribution and shape classification. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Convolutional neural network allows amylose content prediction in yam (Dioscorea alata L.) flour using near infrared spectroscopy

BACKGROUND

Yam (Dioscorea alata L.) is the staple food of many populations in the intertropical zone, where it is grown. The lack of phenotyping methods for tuber quality has hindered the adoption of new genotypes from breeding programs. Recently, near-infrared spectroscopy (NIRS) has been used as a reliable tool to characterize the chemical composition of the yam tuber. However, it failed to predict the amylose content, although this trait is strongly involved in the quality of the product.

RESULTS

This study used NIRS to predict the amylose content from 186 yam flour samples. Two calibration methods were developed and validated on an independent dataset: partial least squares (PLS) and convolutional neural networks (CNN). To evaluate final model performances, the coefficient of determination (R2), the root mean square error (RMSE), and the ratio of performance to deviation (RPD) were calculated using predictions on an independent validation dataset. The tested models showed contrasting performances (i.e., R2 of 0.72 and 0.89, RMSE of 1.33 and 0.81, RPD of 2.13 and 3.49 respectively, for the PLS and the CNN model).

CONCLUSION

According to the quality standard for NIRS model prediction used in food science, the PLS method proved unsuccessful (RPD < 3 and R2 < 0.8) for predicting amylose content from yam flour but the CNN model proved to be reliable and efficient method. With the application of deep learning methods, this study established the proof of concept that amylose content, a key driver of yam textural quality and acceptance, can be predicted accurately using NIRS as a high throughput phenotyping method. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Characterization of Acid Hydrolyzed Taro Boloso-I (Colocasia esculenta Cultivar) Starch as a Diluent in Direct Compression of Tablets

Corn, wheat, rice, potato, and cassava starches have been widely used as pharmaceutical excipients. However, the search for cost-effective local starch alternatives is necessary due to the availability and usage constraints. In Ethiopia, various plant species, including Taro Boloso-I, have been explored as potential sources of pharmaceutical starch. It is a variety of Colocasia esculenta with a high tuber yield and high starch content. However, the native starch requires modifications to enhance its functionality. Therefore, this study aimed to improve the native starch through acid modification and evaluate its performance as a direct compressible tablet excipient. The native starch was treated with a 6% w/v HCl solution for 192 hours, resulting in acid-modified Taro Boloso-I starch, which was then evaluated for suitability for direct compression. XRD patterns of both the native and modified starch showed characteristic A-type crystals, with significantly higher relative crystallinity observed in the latter. Additionally, the acid-modified starch exhibited a lower moisture content and improved flow properties. The compaction study also demonstrated its improved compactibility (tensile strength: 16.82 kg/cm2), surpassing both the native starch (13.17) and Starch 1500® (11.2). The modified starch also showed a lower lubricant sensitivity compared to the native starch and Starch 1500®. Furthermore, paracetamol tablets made with the modified starch exhibited higher mechanical strength and lower friability in all paracetamol concentrations. It incorporated up to 40% paracetamol while maintaining acceptable tablet characteristics, whereas the native starch and Starch 1500® were limited to 30% (w/w). Based on these findings, the modified starch showed promise as an alternative direct compressible excipient in tablet manufacturing.

GBSS mutations in an SBE mutated background restore the potato starch granule morphology and produce ordered granules despite differences to native molecular structure

Potato starch with mutations in starch branching enzyme genes (SBEI, SBEII) and granule-bound starch synthase gene (GBSS) was characterized for molecular and thermal properties. Mutations in GBSS were here stacked to a previously developed SBEI and SBEII mutation line. Additionally, mutations in the GBSS gene alone were induced in the wild-type variety for comparison. The parental line with mutations in the SBE genes showed a ∼ 40 % increase in amylose content compared with the wild-type. Mutations in GBSS-SBEI-SBEII produced non-waxy, low-amylose lines compared with the wild-type. An exception was a line with one remaining GBSS wild-type allele, which displayed ∼80 % higher amylose content than wild-type. Stacked mutations in GBSS in the SBEI-SBEII parental line caused alterations in amylopectin chain length distribution and building block size categories of whole starch. Correlations between size categories of building blocks and unit chains of amylopectin were observed. Starch in GBSS-SBEI-SBEII mutational lines had elevated peak temperature of gelatinization, which was positively correlated with large building blocks.

Towards Negative Emissions: Hydrothermal Carbonization of Biomass for Sustainable Carbon Materials

The contemporary production of carbon materials heavily relies on fossil fuels, contributing significantly to the greenhouse effect. Biomass is a carbon-neutral resource whose organic carbon is formed from atmospheric CO2. Employing biomass as a precursor for synthetic carbon materials can fix atmospheric CO2 into solid materials, achieving negative carbon emissions. Hydrothermal carbonization (HTC) presents an attractive method for converting biomass into carbon materials, by which biomass can be transformed into materials with favorable properties in a distinct hydrothermal environment, and these carbon materials have made extensive progress in many fields. However, the HTC of biomass is a complex and interdisciplinary problem, involving simultaneously the physical properties of the underlying biomass and sub/supercritical water, the chemical mechanisms of hydrothermal synthesis, diverse applications of resulting carbon materials, and the sustainability of the entire technological routes. This review starts with the analysis of biomass composition and distinctive characteristics of the hydrothermal environment. Then, the factors influencing the HTC of biomass, the reaction mechanism, and the properties of resulting carbon materials are discussed in depth, especially the different formation mechanisms of primary and secondary hydrochars. Furthermore, the application and sustainability of biomass-derived carbon materials are summarized, and some insights into future directions are provided.

Effects of cooking methods on the physical properties and in vitro digestibility of starch isolated from Chinese yam

The objective of this study was to compare the structural and functional attributes of Chinese yam starches obtained via different domestic cooking methods. Cooking changed the crystalline type from the C type to the CB type, and disrupted the short- and long-range molecular order of Chinese yam starch. The average chain length of amylopectin in BOS (boiling starch) was the smallest at 22.78, while RWS had the longest average chain length, reaching 24.24. These alterations in molecular structure resulted in variations in functional properties such as solubility, swelling power (SP), pasting characteristics, and rheological properties. Among these alterations, boiling was the most effective method for increasing the water-binding capacity and SP of starch. Specifically, its water holding capacity was 2.12 times that of RWS. In vitro digestion experiments indicated that BOS has a higher digestion rate (k = 0.0272 min-1) and lower RDS (rapidly digestible starch), which may be related to its amylopectin chain length distribution. This study can guide us to utilize yam starch through suitable cooking methods, which is relevant for the processing and application of Chinese yam starch.

Improving the Three-Dimensional Printability of Potato Starch Loaded onto Food Ink

This study focuses on improving the 3D printability of pea protein with the help of food inks designed for jet-type 3D printers. Initially, the food ink base was formulated using nanocellulose-alginate with a gradient of native potato starch and its 3D printability was evaluated. The 3D-printed structures using only candidates for the food ink base formulated with or without potato starch exhibited dimensional accuracy exceeding 95% on both the X and Y axes. However, the accuracy of stacking on the Z-axis was significantly affected by the ink composition. Food ink with 1% potato starch closely matched the CAD design, with an accuracy of approximately 99% on the Z-axis. Potato starch enhanced the stacking of 3D-printed structures by improving the electrostatic repulsion, viscoelasticity, and thixotropic behavior of the food ink base. The 3D printability of pea protein was evaluated using the selected food ink base, showing a 46% improvement in dimensional accuracy on the Z-axis compared to the control group printed with a food ink base lacking potato starch. These findings suggest that starch can serve as an additive support for high-resolution 3D jet-type printing of food ink material.

Resistant starch and type 2 diabetes mellitus: Clinical perspective

The immediate and well-documented benefits of carbohydrate restriction include improved glycemic control in individuals with diabetes mellitus. Starch, a significant source of carbohydrates, is categorized as rapidly digestible, slowly digestible, or resistant starch (RS). RS, which is a non-viscous fermentable fiber, has shown promise in animal studies for antidiabetic effects by improving glucose metabolism. Although the exact mechanism by which RS affects glucose metabolism remains unclear, it is expected to positively impact glucose tolerance and insulin sensitivity. The fermentation of RS by colonic microbiota in the large bowel produces short-chain fatty acids, which exert multiple metabolic effects on glucose regulation and homeostasis. Moreover, RS may influence glucose metabolism via bile acid modulation, independent of its fermentation. Diets rich in RS could aid in blood glucose homeostasis. However, it is uncertain whether they can alter the metabolic pathology associated with glucose regulation. In essence, RS has the potential to lower postprandial glucose levels similarly to a low-glycemic index diet. Yet, its efficacy as a medical nutrition therapy for type 2 diabetes needs further investigation. To confirm the role of RS in glycemic control and to possibly recommend it as an additional dietary approach for people with type 2 diabetes mellitus, a well-designed, large-scale intervention is required.

A new source of starchy flour: Physicochemical and nutritional properties of starchy kiwifruit flour

The physicochemical and nutritional properties of three starchy kiwifruit flour (SKF) were systematically studied. The results revealed that the total starch content of SKF was 66.63-80.42%. SKF showed a B-type crystal structure with a grain size between 7.08 and 9.02 μm. In comparison to corn starch and potato starch, SKF possessed a lower pH (3.43-4.28), transparency (0.68-1.11%) and setback value (0.20-1.73 Pa·s) and a higher swelling power (9.42-15.02 g/g) and hot paste viscosity (1.73-2.10 Pa·s). Moreover, SFK was rich in protein and various mineral elements. It also contained high levels of total phenolics and exhibited a strong antioxidant capacity. The resistant starch content in SKF was as high as 67.19-73.22%, and the rapidly digestible starch content was remarkably lower than that of corn and potato starch. Overall, these unique physicochemical properties of SKF, coupled with its nutritional benefits, give it a good development potential in the food industry.

Functionalization Methods of Starch and Its Derivatives: From Old Limitations to New Possibilities

It has long been known that starch as a raw material is of strategic importance for meeting primarily the nutritional needs of people around the world. Year by year, the demand not only for traditional but also for functional food based on starch and its derivatives is growing. Problems with the availability of petrochemical raw materials, as well as environmental problems with the recycling of post-production waste, make non-food industries also increasingly interested in this biopolymer. Its supporters will point out countless advantages such as wide availability, renewability, and biodegradability. Opponents, in turn, will argue that they will not balance the problems with its processing and storage and poor functional properties. Hence, the race to find new methods to improve starch properties towards multifunctionality is still ongoing. For these reasons, in the presented review, referring to the structure and physicochemical properties of starch, attempts were made to highlight not only the current limitations in its processing but also new possibilities. Attention was paid to progress in the non-selective and selective functionalization of starch to obtain materials with the greatest application potential in the food (resistant starch, dextrins, and maltodextrins) and/or in the non-food industries (hydrophobic and oxidized starch).

Resurrection Plants-A Valuable Source of Natural Bioactive Compounds: From Word-of-Mouth to Scientifically Proven Sustainable Use

Resurrection plant species are a group of higher plants whose vegetative tissues are able to withstand long periods of almost full desiccation and recover quickly upon rewatering. Apart from being a model system for studying desiccation tolerance, resurrection plant species appear to be a valuable source of metabolites, with various areas of application. A significant number of papers have been published in recent years with respect to the extraction and application of bioactive compounds from higher resurrection plant species in various test systems. Promising results have been obtained with respect to antioxidative and antiaging effects in various test systems, particularly regarding valuable anticancer effects in human cell lines. Here, we review the latest advances in the field and propose potential mechanisms of action of myconoside-a predominant secondary compound in the European members of the Gesneriaceae family. In addition, we shed light on the possibilities for the sustainable use of natural products derived from resurrection plants.

A smart thermoresponsive macroporous 4D structure by 4D printing of Pickering-high internal phase emulsions stabilized by plasma-functionalized starch nanomaterials for a possible delivery system

Hierarchically porous structures combine microporosity, mesoporosity, and microporosity to enhance pore accessibility and transport, which are crucial to develop high performance materials for biofabrication, food, and pharmaceutical applications. This work aimed to develop a 4D-printed smart hierarchical macroporous structure through 3D printing of Pickering-type high internal phase emulsions (Pickering-HIPEs). The key was the utilization of surface-active (hydroxybutylated) starch nanomaterials, including starch nanocrystals (SNCs) (from waxy maize starch through acid hydrolysis) or starch nanoparticles (SNPs) (obtained through an ultrasound treatment). An innovative procedure to fabricate the functionalized starch nanomaterials was accomplished by grafting 1,2-butene oxide using a cold plasma technique to enhance their surface hydrophobicity, improving their aggregation, and thus attaining a colloidally stabilized Pickering-HIPEs with a low concentration of each surface-active starch nanomaterial. A flocculation of droplets in Pickering-HIPEs was developed after the addition of modified SNCs or SNPs, leading to the formation of a gel-like structure. The 3D printing of these Pickering-HIPEs developed a highly interconnected large pore structure, possessing a self-assembly property with thermoresponsive behavior. As a potential drug delivery system, this thermoresponsive macroporous 3D structure offered a lower critical solution temperature (LCST)-type phase transition at body temperature, which can be used in the field of smart releasing of bioactive compounds.

Mechanistic insights into the enhanced texture of potato noodles by incorporation of small granule starches

Potato noodles are a popular food due to their unique texture and taste, but native potato starch often fails to meet consumer demands for precise textural outcomes. The effect of blending small granule (waxy amaranth, non-waxy oat and quinoa) starch with potato starch on the properties of noodles was investigated to enhance quality of noodles. Morphological results demonstrated that small granule starch filled gaps between potato starch granules, some of which gelatinized incompletely. Meanwhile, XRD and FTIR analysis indicated that more ordered structures and hydrogen bonding among starch granules increased with addition of small granule starch. The addition of oat or quinoa starch increased gel elasticity, decreased viscosity of the pastes, and increased the tensile strength of noodles, while addition of 30 % and 45 % waxy amaranth starch did not increase G' value of gel or tensile strength of noodles. These results indicated that amylose molecules played an important role during retrogradation, and may intertwine and interact with each other to enhance the network structure of starch gel in potato starch blended with oat or quinoa starch. This study provides a natural way to modify potato starch for desirable textural properties of noodle product.

Incorporation of Lepidium perfoliatum seed gum into wheat starch affects its physicochemical, viscoelastic, pasting and freeze-thaw syneresis properties

This study aimed to investigate the influence of incorporating Lepidium perfoliatum seed gum (LPSG) into wheat starch (WS) at various mixing ratios on its FTIR, DSC, steady and dynamic rheological properties, pasting attributes, syneresis, and particle size distributions characteristics. The interaction between WS and LPSG was purely based on hydrogen-bonding. It was found that the onset (To) and peak (Tp) temperatures of the LPSG-rich mixtures increased by 10 % and 8 %, respectively, while the enthalpy (ΔH) decreased by 70 % compared to WS. A higher LPSG ratio led to a decrease in the frequency dependence of storage modulus (G'), as well as an increase in the pseudoplasticity of the mixtures. The in-shear structural recovery test showed that the rate of recovery (R, %) increased with an increasing LPSG ratio. The pasting results demonstrated that the 9/1 ratio had the highest final viscosity and the lowest relative breakdown. Applying 1 to 5 freeze-thaw cycles resulted in a 50 % to 70 % decrease in syneresis for the 9/1 mixing ratio in comparison to WS, respectively. The incorporation of LPSG into WS resulted in higher static and dynamic magnitudes of yield stress, as well as an increase in particle size when compared to WS.

Production and characterization of starch-lignin based materials: A review

In their pristine state, starch and lignin are abundant and inexpensive natural polymers frequently considered green alternatives to oil-based and synthetic polymers. Despite their availability and owing to their physicochemical properties; starch and lignin are not often utilized in their pristine forms for high-performance applications. Generally, chemical and physical modifications transform them into starch- and lignin-based materials with broadened properties and functionality. In the last decade, the combination of starch and lignin for producing reinforced materials has gained significant attention. The reinforcing of starch matrices with lignin has received primary focus because of the enhanced water sensitivity, UV protection, and mechanical and thermal resistance that lignin introduces to starch-based materials. This review paper aims to assess starch-lignin materials' production and characterization technologies, highlighting their physicochemical properties, outcomes, challenges, and opportunities. First, this paper describes the current status, sources, and chemical modifications of lignin and starch. Next, the discussion is oriented toward starch-lignin materials and their production approaches, such as blends, composites, plasticized/crosslinked films, and coupled polymers. Special attention is given to the characterization methods of starch-lignin materials, focusing on their advantages, disadvantages, and expected outcomes. Finally, the challenges, opportunities, and future perspectives in developing starch-lignin materials, such as adhesives, coatings, films, and controlled delivery systems, are discussed.

Effects of starch multiscale structure on the physicochemical properties and digestibility of Radix Cynanchi bungei starch

Radix Cynanchi bungei (RCb) contains 40-70 % starch, yet little is known about the structure and properties of RCb starch. In this study, the multiscale structure of two cultivars of RCb starch (YW201501 and BW201001) were characterized, and the effects of starch structure on its physicochemical properties were investigated. The differences in physicochemical properties of RCb starch were influenced by its multiscale structure. The starch granules were round and irregular polygon, with sizes ranging between 2 and 14 μm. YW201501 had a higher amylose (21.81 %) and lipid (0.96 %) content, molecular weight (59.5 × 106 g/mol), and A chain proportion (27.5 %), and a lower average granule size (6.14 μm), amylopectin average chain length (19.7), and B3 chain proportion (10.3 %). Both starches were B-type crystalline, with higher crystallinity (26.3 %) and R1047/1022 (0.74) for YW201501, resulting in large gelatinization enthalpy. In addition, the higher peak viscosity and larger retrogradation degree of YW201501 were correlated to its higher amylose content. In vitro digestibility revealed that the low rapidly digestible starch and high resistant starch of BW201001 were related to the fine structure of starch. YW201501 and BW201001 had a medium glycemic index (62.6-66.0) with potential for processing into healthy starchy foods.

Effects of sugar beet pectin on the pasting, rheological, thermal, and microstructural properties of wheat starch

The effects of addition of sugar beet pectin (SBP) on the pasting, rheological, thermal, and microstructural properties of wheat starch (WS) were investigated. Results revealed that SBP addition significantly increased the peak viscosity, trough viscosity, breakdown value, final viscosity, and setback value of WS, whereas decreased the pasting temperature. SBP raised the swelling power (from 13.44 to 21.32 g/g) and endothermic enthalpy (ΔH, from 8.17 to 8.98 J/g), but decreased the transparency (from 9.70 % to 1.37 %). Regarding rheological properties, WS-SBP mixtures exhibited a pseudo-plastic behavior, and SBP enhanced the viscoelasticity, but decreased the deformability. Particle size distribution analysis confirmed that SBP promoted the swelling of WS granules. Fourier-transform infrared spectroscopy results suggested that the interactions between SBP and WS did not involve covalent bonding, and the formation of ordered structure was inhibited by SBP addition. Additionally, scanning electron microscopy observation found that the gel network of WS-SBP mixtures became more irregular, pore size gradually decreased, and the wall became thinner as the SBP concentration increased. These results indicated that SBP is a promising non-starch polysaccharide that can enhance the processing properties of WS.

Catalytic properties of amylases produced by Cunninghamella echinulata and Rhizopus microsporus

The present work aimed to characterize and compare the catalytic properties of amylases from Cunninghamella echinulata and Rhizopus microsporus. The highest production of amylase by C. echinulata, 234.94 U g-1 of dry substrate (or 23.49 U mL-1), was obtained using wheat bran as a substrate, with 50-55% initial moisture and kept at 28 °C for 48 h. The highest production of amylases by R. microsporus, 224.85 U g-1 of dry substrate (or 22.48 U mL-1), was obtained cultivating wheat bran with 65% initial moisture at 45 °C for 24 h. The optimal activity of the amylases was observed at pH 5.0 at 60 °C for C. echinulata enzymes and at pH 4.5 at 65 °C for R. microsporus. The amylases produced by C. echinulata were stable at pH 4.0-8.0, while the R. microsporus enzymes were stable at pH 4.0-10.0. The amylases produced by C. echinulata remained stable for 1 h at 50 °C and the R. microsporus amylases maintained catalytic activity for 1 h at 55 °C. The enzymatic extracts of both fungi hydrolyzed starches from different plant sources and showed potential for liquefaction of starch, however the amylolytic complex of C. echinulata exhibited greater saccharifying potential.

Physicochemical Properties of Wild Yam (Dioscorea villosa) Starch

Native starch extracted from wild yam (Dioscorea villosa) was evaluated for its intrinsic physicochemical properties. From the results, essential metals such as K, Ca, P, and Fe were detected along with some nonessential heavy metals below the WHO permissible limits. Bulk density was 0.13-0.63 g/mL. The water absorption capacity, oil absorption capacity, swelling power, and solubility of the starch were pH-responsive. Thermal profiles showed onset temperature, To (59.21 °C), peak temperature, Tp (60.22 °C), endset temperature, Tc (63.12 °C), gelatinization enthalpy, ΔHgel (0.54 J/g), temperature range of gelatinization, R (3.91 °C), and peak height index, PHI (1.87 J/g °C). Exhibiting a crystallite size of 0.03 nm, absorption peaks of 15.3119°, 24.4120°, and 18.4170°, corresponding to interplanar d-spacings of 3.7500 Ǻ, 5.14000 Ǻ, and 4.954610 Ǻ, were obtained. Evidence of C-H at 1338.1 cm-1, C-O at 640.0 cm-1, C-H stretch at 2829.7 cm-1, and a strong and broad O-H group at 3291.2 cm-1 were obtained. The starch granules had low particle sizes, were homogeneous, and were aggregates of irregular shapes. At a lower pH (2-4), the wild yam starch studied could be a potential absorbent material in the production of disposable diapers and female napkins and as biodegradable films due to its high hydrophobicity at a high pH (8-12).

Characterization of arrowroot (Maranta arundinacea) starch as a potential starch source for the food industry

Arrowroot is an underutilized tuber crop in Sri Lanka and the characterization of starch was done to identify its nutritional, physicochemical, and functional properties to evaluate its potential for use in the food industry. This study distinctly advances the field of arrowroot starch characterization by providing more characterization techniques for starch samples from Sri Lanka. Arrowroot starch colour was closely similar to colour of wheat flour indicating that the effect of colour is minimum when replacing wheat flour. Oval, spherical, and irregular globular shapes were the predominant starch granule shapes for arrowroot. The average length of starch granules was 44.99 ± 1.27 μm while the width of granules was 31.44 ± 0.58 μm. The least gelation concentration was 8.0% indicating its better gel-forming ability. The nutritional composition of arrowroot starch consisted of low crude protein (0.72 ± 0.02%), crude fat (0.26 ± 0.19%), and crude fiber (1.00 ± 0.09%) contents indicating the purity of starch. Sodium, Potassium, Calcium, Iron, and Zinc contents were 52.6 mg/kg, 4312.95 mg/kg, 382.67 mg/kg, 9.07 mg/kg, and 2.59 mg/kg, respectively. Results of flour densities demonstrated the potential of arrowroot starch to be used in the pharmaceutical industry. Arrowroot starch had high viscosity defining its potential as a thickener. The starch also had high swelling power and solubility indices while solubility was positively correlated with viscosity (0.679; P > 0.05). The low moisture absorbance indicates a longer shelf life of stored arrowroot starch. Onset temperature (To) of 75.02 °C, peak temperature (Tp) of 77.95 °C, and conclusion temperature (Tc) of 82.43 °C were resulted from DSC thermogram. Arrowroot was identified as an A-type starch from x-ray diffractometry and the FT-IR spectrum of arrowroot was identical to starch and presented the carbohydrate nature of starch. Thus, arrowroot starch has a high potential to be used in the food industry based on its functional properties.

Use of Raw Peach Gum as a Sustainable Additive for the Development of Water-Sensitive and Biodegradable Thermoplastic Starch Films

In this study, formulations of thermoplastic starch (TPS) with 5, 10, and 15 parts per hundred resin (phr) of raw peach gum (PG) were prepared by melt extrusion followed by injection molding to obtain standard specimens for characterization. In addition, biodegradable films were developed by compression molding. It was determined that TPS with 5 phr and 10 phr of PG presented similar mechanical behavior to pure TPS after the processing. However, results indicated that adding PG in 10 phr slowed down the starch's retrogradation, delaying the TPS structure's stiffening. Moreover, the TPS-PG formulations presented improved solubility, which increased by 24% with 10 and 15 phr of PG compared to that shown for TPS. Additionally, PG enhanced the compostability of TPS, causing the sample to disintegrate in a shorter period. In conclusion, it was determined that raw PG added in 10 phr could be added as a sustainable additive to modify the biodegradation and water sensitivity of TPS without affecting its mechanical behavior after processing and delaying the retrogradation of the TPS structure, increasing its shelf life.

Effect of Addition of Cross-Linked Starch on the Properties of Degraded PBAT Poly(butylene adipate-co-terephthalate) Films

This work aimed to evaluate the properties of butylene adipate-co-terephthalate (PBAT) degraded after 1800 days of storage (DPBAT) by preparing blends (films) with crosslinked starch (Cm) through extrusion and thermocompression. Different ratios of DPBAT:Cm (70:30, 60:40, and 50:50 m/m) were prepared. The incorporation of Cm into DPBAT significantly changed the properties of the films by making them stiffer (increasing Young's modulus by up to 50%) and increasing the thermal resistance of DPBAT. The presence of crosslinked starch in the films made them less hydrophobic (with decreased contact angle and increased moisture content), but these parameters did not vary linearly with changes in the content of crosslinked starch in the blend (DPBAT:Cm). The microscopic images show an inhomogeneous distribution of Cm granules in the DPBAT matrix. Thus, the films prepared with PBAT show a significant decrease in their mechanical parameters and heat resistance after long-term storage. However, the preparation of blends of degraded DPBAT with crosslinked starch promoted changes in the properties of the films prepared by thermocompression, which could be useful for disposable packaging.

Starch-Based Polymer Materials as Advanced Adsorbents for Sustainable Water Treatment: Current Status, Challenges, and Future Perspectives

Over the past three decades, chemical and biological water contamination has become a major concern, particularly in the industrialized world. Heavy metals, aromatic compounds, and dyes are among the harmful substances that contribute to water pollution, which jeopardies the human health. For this reason, it is of the utmost importance to locate methods for the cleanup of wastewater that are not genuinely effective. Owing to its non-toxicity, biodegradability, and biocompatibility, starch is a naturally occurring polysaccharide that scientists are looking into as a possible environmentally friendly material for sustainable water remediation. Starch could exhibit significant adsorption capabilities towards pollutants with the substitution of amide, amino, carboxyl, and other functional groups for hydroxyl groups. Starch derivatives may effectively remove contaminants such as oil, organic solvents, pesticides, heavy metals, dyes, and pharmaceutical pollutants by employing adsorption techniques at a rate greater than 90%. The maximal adsorption capacities of starch-based adsorbents for oil and organic solvents, pesticides, heavy metal ions, dyes, and pharmaceuticals are 13,000, 66, 2000, 25,000, and 782 mg/g, respectively. Although starch-based adsorbents have demonstrated a promising future for environmental wastewater treatment, additional research is required to optimize the technique before the starch-based adsorbent can be used in large-scale in situ wastewater treatment.

Modification of Starches and Flours by Acetylation and Its Dual Modifications: A Review of Impact on Physicochemical Properties and Their Applications

Various modification treatments have been carried out to improve the physicochemical and functional properties of various types of starch and flour. Modification by acetylation has been widely used to improve the quality and stability of starch. This review describes the effects of acetylation modification and its dual modifications on the physicochemical properties of starch/flour and their applications. Acetylation can increase swelling power, swelling volume, water/oil absorption capacity, and retrogradation stability. The dual modification of acetylation with cross-linking or hydrothermal treatment can improve the thermal stability of starch/flour. However, the results of the modifications may vary depending on the type of starch, reagents, and processing methods. Acetylated starch can be used as an encapsulant for nanoparticles, biofilms, adhesives, fat replacers, and other products with better paste stability and clarity. A comparison of various characteristics of acetylated starches and their dual modifications is expected to be a reference for developing and applying acetylated starches/flours in various fields and products.

A Review on Isolation, Characterization, Modification, and Applications of Proso Millet Starch

Proso millet starch (PMS) as an unconventional and underutilized millet starch is becoming increasingly popular worldwide due to its health-promoting properties. This review summarizes research progress in the isolation, characterization, modification, and applications of PMS. PMS can be isolated from proso millet grains by acidic, alkaline, or enzymatic extraction. PMS exhibits typical A-type polymorphic diffraction patterns and shows polygonal and spherical granular structures with a granule size of 0.3-17 µm. PMS is modified by chemical, physical, and biological methods. The native and modified PMS are analyzed for swelling power, solubility, pasting properties, thermal properties, retrogradation, freeze-thaw stability, and in vitro digestibility. The improved physicochemical, structural, and functional properties and digestibility of modified PMS are discussed in terms of their suitability for specific applications. The potential applications of native and modified PMS in food and nonfood products are presented. Future prospects for research and commercial use of PMS in the food industry are also highlighted.

Rapid screening of sixty potato cultivars for starch profiles to address a consumer glycemic dilemma

Potatoes are a dietary staple consumed by a significant portion of the world, providing valuable carbohydrates and vitamins. However, most commercially produced potatoes have a high content of highly branched amylopectin starch, which generally results in a high glycemic index (GI). Consumption of foods with high levels of amylopectin elicit a rapid spike in blood glucose levels, which is undesirable for individuals who are pre-diabetic, diabetic, or obese. Some cultivars of potatoes with lower amylopectin levels have previously been identified and are commercially available in niche markets in some countries, but they are relatively unavailable in the United States and Latin America. The high glycemic index of widely available potatoes presents a problematic "consumer's dilemma" for individuals and families that may not be able to afford a better-balanced, more favorable diet. Some native communities in the Andes (Bolivia, Chile, and Peru) reportedly embrace a tradition of providing low glycemic tubers to people with obesity or diabetes to help people mitigate what is now understood as the negative effects of high blood sugar and obesity. These cultivars are not widely available on a global market. This study examines 60 potato cultivars to identify potatoes with low amylopectin. Three independent analyses of potato starch were used: microscopic examination of granule structure, water absorption, and spectrophotometric analysis of iodine complexes to identify potato cultivars with low amylopectin Differences among cultivars tested were detected by all three types of analyses. The most promising cultivars are Huckleberry Gold, Muru, Multa, Green Mountain, and an October Blue x Colorado Rose cross. Further work is necessary to document the ability of these low amylopectin cultivars to reduce blood glucose spike levels in human subjects.

Cultivation pattern affects starch structure and physicochemical properties of yam (Dioscorea persimilis)

Yam (Dioscorea spp.) is a major food source in many countries due to its tuber rich in starch (60 %-89 % of the dry weight) and various important micronutrients. Orientation Supergene Cultivation (OSC) pattern is a simple and efficient cultivation mode developed in China in recent years. However, little is known about its effect on yam tuber starch. In this study, the starchy tuber yield, starch structure and physicochemical properties were compared and analyzed in detail between OSC and Traditional Vertical Cultivation (TVC) with Dioscorea persimilis "zhugaoshu", a widely cultivated variety. The results proved that OSC significantly increased tuber yield (23.76 %-31.86 %) and commodity quality (more smooth skin) compared with TVC in three consecutive years of field experiments. Moreover, OSC increased amylopectin content, resistant starch content, granule average diameter and average degree of crystallinity by 2.7 %, 5.8 %, 14.7 % and 9.5 %, respectively, while OSC decreased starch molecular weight (Mw). These traits resulted in starch with lower thermal properties (To, Tp, Tc, ΔH_gel), but higher pasting properties (PV, TV). Our results indicated that cultivation pattern affected the yam production and starch physicochemical properties. It would not only provide a practical basis for OSC promotion, but also provide valuable information on how to guide the yam starch end use in food and non-food industries.

Analysis of Starch Structure and Pasting Characteristics of Millet Thick Wine during Fermentation

Starch is the main substrate in millet thick wine (MTW). In order to control the fermentation process of MTW, it is critical to monitor changes in the starch structure and physicochemical characteristics during the fermentation of MTW. In the present study, the structural characteristics of MTW starch were analyzed by scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and rapid viscosity analysis (RVA). The results of SEM and CLSM showed that large starch granules in MTW swelled, developed cavities, and ruptured or even vanished with the prolongation of the fermentation time, whereas the size and shape of small starch granules barely changed, only falling off the pomegranate-seed-like aggregates. With the increase in fermentation time, the relative crystallinity of starch in MTW gradually increased. In addition, the short-range ordered structures underwent complex changes. Changes in the starch morphology and ordered structure led to an increase in the peak viscosity time and the initial gelatinization temperature. The present results reveal the beneficial effect of fermentation on MTW processing and suggest its potential applications in other millet-based fermented products.

Main Characteristics of Processed Grain Starch Products and Physicochemical Features of the Starches from Maize (Zea mays L.) with Different Genotypes

To understand the relationship between the genotype of maize plants and differences in their origin and the ploidy of the genome, which carry gene alleles programming the biosynthesis of various starch modifications, the thermodynamic and morphological features of starches from the grains of these plants have been studied. This study investigated the peculiarities of starch extracted from subspecies of maize (the dry matter mass (DM) fraction, starch content in grain DM, ash content in grain DM, and amylose content in starch) belonging to different genotypes within the framework of the program for the investigation of polymorphism of the world collection of plant genetic resources VIR. Among the starch genotypes of maize studied, four groups comprised the waxy (wx), conditionally high amylose ("ae"), sugar (su), and wild (WT) genotypes. Starches with an amylose content of over 30% conditionally belonged to the "ae" genotype. The starches of the su genotype had fewer starch granules than other investigated genotypes. An increase in amylose content in the investigated starches, accompanied by a decrease in their thermodynamic melting parameters, induced the accumulation of defective structures in the starches under study. The thermodynamic parameters evaluated for dissociation of the amylose-lipid complex were temperature (T_aml) and enthalpy (H_aml); for the su genotype, temperature and enthalpy values of dissociation of the amylose-lipid complex were higher than in the starches from the "ae" and WT genotypes. This study has shown that the amylose content in starch and the individual features of the maize genotype determine the thermodynamic melting parameters of the starches under study.

Optimization of starch extraction from Amorphophallus paeoniifolius corms using response surface methodology (RSM) and artificial neural network (ANN) for improving yield with tenable chemical attributes

The development of the extraction process for improving the starch yield from unconventional plants is emerging as a topic of interest. In this respect, the present work aimed to optimize the starch extraction from the corms of elephant foot yam (Amorphophallus paeoniifolius) with the help of response surface methodology (RSM) and artificial neural network (ANN). The RSM model performed better than the ANN in predicting the starch yield with higher precision. In this connection, this study for the first time reports the significant improvement of starch yield from A. paeoniifolius (51.76 g/100 g of the corm dry weight). The extracted starch samples based on yield - high (APHS), medium (APMS), and low (APLS) exhibited a variable granule size (7.17-14.14 μm) along with low ash content, moisture content, protein, and free amino acid indicating purity and desirability. The FTIR analysis also confirmed the chemical composition and purity of the starch samples. Moreover, the XRD analysis showed the prevalence of C-type starch (2θ = 14.303°). Based on other physicochemical, biochemical, functional, and pasting properties, the three starch samples showed more or less similar characteristics thereby indicating the sustentation of beneficial attributes of starch molecules irrespective of the variation in extraction parameters.

Effects of primary, secondary and tertiary structures on functional properties of thermoplastic starch biopolymer blend films

To better understand the correlation between structure and properties in thermoplastic starch biopolymer blend films, the effects of amylose content, chain length distribution of amylopectin and molecular orientation of thermoplastic sweet potato starch (TSPS) and thermoplastic pea starch (TPES) on microstructure and functional properties of thermoplastic starch biopolymer blend films were studied. After thermoplastic extrusion, the amylose contents of TSPS and TPES decreased by 16.10 % and 13.13 %, respectively. The proportion of the chains with the degree of polymerization between 9 and 24 of amylopectin in TSPS and TPES increased from 67.61 % to 69.50 %, and from 69.51 % to 71.06 %, respectively. As a result, the degree of crystallinity and molecular orientation of TSPS and TPES films increased as compared to sweet potato starch and pea starch films. The thermoplastic starch biopolymer blend films possessed a more homogeneous and compacter network. The tensile strength and water resistance of thermoplastic starch biopolymer blend films increased significantly, whereas thickness and elongation at break of thermoplastic starch biopolymer blend films decreased significantly.

Resistant starch from sweet potatoes: Recent advancements and applications in the food sector

In tropical and subtropical areas, tuber and root crops are staple foods and a key source of energy. Sweet potato (SP) is currently regarded as one of the world's top ten foods because of its diverse sizes, shapes, color, and health benefits. The resistant starch (RS) content of SP is substantial. It is predicted to become the cheapest item in the food industry due to its extensive variety, food stability, emulsifier and fat substitution capabilities, and as filler. As a result, interest in SP-sourced RS has recently increased. Due to their unique nutritional and functional qualities, novelty has become a popular research focus in recent years. This review will summarize the current understanding of SP starch components and their impact on the technological and physicochemical properties of produced starch for commercial viability. The importance of sweet potato RS in addressing future RS demand sustainability is emphasized. SPs are a viable alternative to tubers as a sustainable raw material for RS production. It has an advantage over tubers because of its intrinsic nutritional value and climatic endurance. Thermal, chemical, and enzymatic treatments are effective RS manufacturing procedures. The adaptability of sweet potato RS allows for a wide range of food applications.

Insights into the Supramolecular Structure and Degradation Mechanisms of Starch from Different Botanical Sources as Affected by Extrusion-based 3D Printing

Extrusion-based 3D printing has emerged as the most versatile additive manufacturing technique for the printing of practically any material. However, 3D printing of functional materials often activates thermo-mechanical degradation, which affects the 3D shape quality. Herein, we describe the structural changes of eight different starch sources (normal or waxy) as a consequence of the temperature of an extrusion-based 3D printing system through in-depth characterization of their molecular and structural changes. The combination of size-exclusion chromatography, small-angle X-ray scattering, X-ray diffraction, dynamic viscoelasticity measurements, and in vitro digestion has offered an extensive picture of the structural and biological transformations of starch varieties. Depending on the 3D printing conditions, either gelatinization was attained ("moderate" condition) or single-amylose helix formation was induced ("extreme" condition). The stiff amylopectin crystallites in starch granules were more susceptible to thermo-mechanical degradation compared to flexible amorphous amylose. The crystalline morphology of the starch varieties varied from B-type crystallinity for the starch 3D printing at the "moderate" condition to a mixture of C- and V-type crystallinity regarding the "extreme" condition. The "extreme" condition reduced the viscoelasticity of 3D-printed starches but increased the starch digestibility rate/extent. In contrast, the "moderate" condition increased the viscoelastic moduli, decreasing the starch digestion rate/extent. This was more considerable mainly regarding the waxy starch varieties. Finally, normal starch varieties presented a well-defined shape fidelity, being able to form a stable structure, whereas waxy starches exhibited a non-well-defined structure and were not able to maintain their integrity after printing. The results of this research allow us to monitor the degradability of a variety of starch cultivars to create starch-based 3D structures, in which the local structure can be controlled based on the 3D printing parameters.

Drying of Chinese medicine residues (CMR) by hot air for potential utilization as renewable fuels: drying behaviors, effective moisture diffusivity, and pollutant emissions

High moisture in Chinese medicine residues (CMR) can decrease the energy efficiency of thermochemical conversion, which necessitates the pre-drying. Owing to the complex constituents and decoction, CMR may possess distinct drying characteristics. It is necessary to understand its drying behaviors, effective moisture diffusivity, and pollutant emissions for future design and optimization of an industrial-level dryer. In this study, the drying of four types of typical CMR in hot nitrogen was performed. Their condensate and exhaust gas were collected and characterized. The results indicated that their drying process was dominated by internal moisture transport mechanism with a long falling rate stage. Drying temperature influenced their drying process more greatly than N2 velocity did. Residual sum of squares, root mean square error, and coefficient of determination indicated that Weibull model demonstrated their drying process best. Their effective moisture diffusivity was in the range of 1.224 × 10-8 to 4.868 × 10-8 m2/s, while their drying activation energy ranged from 16.93 to 30.39 kJ/mol. The acidic condensate had high chemical oxygen demand and total nitrogen concentration and yet low total phosphorus concentration. The concentration of total volatile organic compounds, non-methane hydrocarbons, H2S, and NH3 in the exhaust gas met the national emission limitation, while the deodorization of exhaust gas was required to remove odor smell.

Supplementary information

The online version contains supplementary material available at 10.1007/s13399-022-03722-4.

Individual or mixing extrusion of Tartary buckwheat and adzuki bean: Effect on quality properties and starch digestibility of instant powder

Introduction

Tartary buckwheat and adzuki bean, which are classified as coarse grain, has attracted increasing attention as potential functional ingredient or food source because of their high levels of bioactive components and various health benefits.

Methods

This work investigated the effect of two different extrusion modes including individual extrusion and mixing extrusion on the phytochemical compositions, physicochemical properties and in vitro starch digestibility of instant powder which consists mainly of Tartary buckwheat and adzuki bean flour.

Results

Compared to mixing extrusion, instant powder obtained with individual extrusion retained higher levels of protein, resistant starch, polyphenols, flavonoids and lower gelatinization degree and estimated glycemic index. The α-glucosidase inhibitory activity (35.45%) of the instant powder obtained with individual extrusion was stronger than that obtained with mixing extrusion (26.58%). Lower levels of digestibility (39.65%) and slower digestion rate coefficient (0.25 min^-1) were observed in the instant powder obtained with individual extrusion than in mixing extrusion (50.40%, 0.40 min^-1) by logarithm-of-slope analysis. Moreover, two extrusion modes had no significant impact on the sensory quality of instant powder. Correlation analysis showed that the flavonoids were significantly correlated with physicochemical properties and starch digestibility of the instant powder.

Discussion

These findings suggest that the instant powder obtained with individual extrusion could be used as an ideal functional food resource with anti-diabetic potential.

A study on the structural, physicochemical, rheological and thermal properties of high hydrostatic pressurized pearl millet starch

Starch in native form has limited application due to functional and physicochemical characteristics. To overcome these limitations, starch can be modified by non-thermal technologies such as high hydrostatic pressure (HHP). This study investigates high-pressure-induced gelatinization and the effect of this process on the structural, functional, morphological, pasting, thermal, physical and rheological properties of millet starch. The suspension of millet starch and water was pressurized at 200, 400 and 600 MPa for 10, 20 and 30 min to modify the starch in terms of structure, morphology, some physicochemical and rheological properties. Swelling strength and starch solubility decreased as a result of treatment with HHP. All treatments caused to increase in water holding capacity of the starch (from 0.66 % for native starch to 2.19 % for 600 MPa-30 min). Thermal analysis showed a decrease in gelatinization temperature and enthalpy of gelatinization and the pasting properties showed a decrease in the peak viscosity after HHP treatment. In addition, HHP treatment caused to increase in the hydration ability of starch by creating porosity and gaps in the granule surface and increasing the specific surface area. HHP application resulted in an increase in the peak time and pasting temperature and a decrease in breakdown and peak viscosities, final viscosity and setback viscosity in comparison with native starch of millet. The starch sample treated with 600 MPa for 30 min had the lowest syneresis and retrogradation ability. Increasing pressure and the time led to an increase in the elastic nature of the starch samples. According to the results, it is possible to increase usage area of starches in the food industry by improving its technological with HHP. This green physical technology can influence the quality parameters of starch, which can provide benefits for product machining and economic purposes.

An Analysis of the Plant- and Animal-Based Hydrocolloids as Byproducts of the Food Industry

Hydrocolloids are naturally occurring polysaccharides or proteins, which are used to gelatinize, modify texture, and thicken food products, and are also utilized in edible films and drug capsule production. Moreover, several hydrocolloids are known to have a positive impact on human health, including prebiotics rich in bioactive compounds. In this paper, plant-derived hydrocolloids from arrowroot (Maranta arundinacea), kuzu (Pueraria montana var lobata), Sassafras tree (Sassafras albidum) leaves, sugarcane, acorn, and animal-derived gelatin have been reviewed. Hydrocolloid processing, utilization, physicochemical activities, composition, and health benefits have been described. The food industry generates waste such as plant parts, fibers, residue, scales, bones, fins, feathers, or skin, which are often discarded back into the environment, polluting it or into landfills, where they provide no use and generate transport and storage costs. Food industry waste frequently contains useful compounds, which can yield additional income if acquired, thus decreasing the environmental pollution. Despite conventional manufacturing, the aforementioned hydrocolloids can be recycled as byproducts, which not only minimizes waste, lowers transportation and storage expenses, and boosts revenue, but also enables the production of novel, functional, and healthy food additives for the food industry worldwide.

Non-conventional starch from cubio tuber (Tropaeolum tuberosum): Physicochemical, structural, morphological, thermal characterization and the evaluation of its potential as a packaging material

This work aimed to characterize the physicochemical, structural, morphological, and thermal properties of a non-conventional starch obtained from cubio (Tropaeolum tuberosum), as well as to evaluate the potential use of this native Andean tuber in the preparation of biodegradable packaging. The cubio starch (CUS) showed an intermediated apparent amylose content (31.2 %) accompanied by a high CIE whiteness index (90.8). About the morphology and particle size, the CUS exhibited irregular oval and round shapes and a smooth surface with a mean particle diameter of 14.04 ± 0.1 μm. Although it showed good stability regarding pasting properties, the final viscosity was low. Native CUS exhibits a typical B-type diffraction structure, with a relative crystallinity of 16 %. The resistant starch (RS) fraction of the CUS was 94 %, indicating a low susceptibility to enzymatic hydrolysis. The thermal analysis demonstrated that the CUS showed good thermal stability. Additionally, the films prepared using CUS as raw material showed continuous surfaces without porosities, good thermal stability, and high transparency. The results of this work demonstrate the industrial potential of the CUS as it presents characteristics comparable to commercial potato starch.

Chemical Modifications of Normal and Waxy Potato Starches Affect Functional Properties of Aerogels

Aerogels are of increasing interest because of their exceptionally large surface area, porous structure, and low weight. Despite the significant increase in interest in the subject of starch-based aerogels, the number of detailed studies is rather scarce, which is especially evident in the case of chemically modified derivatives. Therefore, the study aims to evaluate the physicochemical properties of aerogels from chemically modified potato starch preparations (E 1422 and E 1450) obtained both from normal and waxy starches. Aerogels were prepared through the retrogradation of starch pastes followed by the gradual replacement of water with ethyl alcohol. The obtained preparations were characterized in terms of their bulk density, oil-binding capacity, as well as the texture and rheological properties of the formed pastes. Moreover, their usefulness was evaluated in an emulsion system employing rheological and low-field NMR methods. The obtained aerogels were characterized by a lower bulk density of 0.18-0.59 g/cm³ and 5.4-6.6 times higher oil-binding capacity compared to native potato starch. The chemical modification of starch helped to further alter the functional properties of the obtained aerogels, making them more effective oil binders, emulsifiers, and stabilizers (increasing the stability from 55 to 90%), which was especially evident for E 1450 preparation. Amylose content improved the aerogel properties, as waxy preparations were characterized by worse functional properties with the only exception of improved thickening ability. The most beneficial properties for the preparation of emulsions were observed for the aerogel obtained based on E 1450 normal potato starch.

Isolation, partial characterization and in vitro digestion of starch from Ariopsis peltata and Lagenandra toxicaria tuber

The starch from two aroid tuber viz. Ariopsis peltata and Lagenandra toxicaria were isolated and evaluated for their morphological, physical and chemical properties. The tubers of these plants are used as food and medicine by the indigenous communities. The starch yield from A. peltata tuber was 25 ± 1.7% with an amylose content of 10 ± 0.9%, while the tuber of L. toxicaria contained 28 ± 6.5% starch with 15 ± 0.5% of apparent amylose in it. The starch isolated from both the tubers was highly pure (99%) starch exhibiting an A-type X-ray diffraction pattern. The starch granules of L. toxicaria were of various shapes and exhibited a smooth surface without any cleft or break. While the starch granules of A. peltata were spherical with smooth surface, as well as rough surface. The breaks and clefts were apparent on the rough-surfaced granules. The gelatinization temperature range for A. peltata and L. toxicaria starch is approximately 23 °C and 19 °C respectively. A. peltata starch showed higher thermal stability compared to L. toxicaria starch and either of the starch was rapidly digestible as evident from in vitro digestion study. The physicochemical properties of both the starches render them stable to withstand extreme processing. Besides they also mimic simple sugar in digestibility. So it can be utilized as a substitute for simple sugars in brewing and pharmaceutical industries.

Effects of blending ratios and baking temperature on physicochemical properties and sensory acceptability of biscuits prepared from pumpkin, common bean, and wheat composite flour

The utilization of vegetables with supplementation of cereals and pulses plays a vital role in improving protein-energy malnutrition and micronutrient deficiency. Therefore, the study aimed to develop biscuits from pumpkin, common bean, and wheat composite flour with better physicochemical properties and sensory acceptability. All quality parameters were evaluated by using an official standard procedure. The results showed a significant (p < 0.05) difference among products. The addition of pumpkin and common bean flour to composite biscuits significantly (p < 0.05) increased the protein (9.44-16.16%), fat (17.03-21.42%), ash (1.72-2.08%), and crude fibre (1.37-2.06%) contents. In addition, the biscuit's lightness decreased as the incorporation of pumpkin and common bean increased. However, the redness and yellowness of the sample increased. Sensory evaluation scores indicated that biscuits supplemented with 10% pumpkin, 15% common bean, and 75% wheat composite flour baked at 200 °C were more preferred than other formulated products. Therefore, substituting pumpkin powder with wheat-common bean flour significantly improved the nutritional content of the biscuit with desirable sensory acceptability. The findings also showed that the developed products are essential in improving dietary diversity and food insecurity among low-income families.