On-line monitoring of volatile organic compounds at pptv levels by means of proton-transfer-reaction mass spectrometry (PTR-MS) medical applications, food control and environmental research

Optimization of the determination of volatile organic compounds in plant tissue and soil samples: Untargeted metabolomics of main active compounds

This review critically assesses the determination of low molecular weight volatiles by different methods, providing context for the development of suitable techniques to determine volatile content in plant tissue and soil samples as well as the associated analytical challenges. Although sensitive analytical methods have been reported in recent decades, studies on their application in modern investigative techniques are lacking. Herein, the latest sampling methods in volatile biochemistry, current advancements in the understanding of these analytes, and the significance of these findings for other types of volatiles are summarized. Gas chromatography, high-performance liquid chromatography, ion chromatography, thin-film microextraction, and real-time monitoring techniques are discussed and critically determined. This review concerns the methods most suitable for future research in this area.

Orientation of Antibody Modified and Reacted on Carboxy-Functionalized Polystyrene Particle Revealed by Zeta Potential Measurement

The comprehensive understanding of the orientation of antibodies on a solid surface is crucial for affinity-based sensing mechanisms. In this study, we demonstrated that the orientation of primary antibodies modified on carboxy-functionalized polystyrene (PS) particles can be analyzed using zeta potential behavior at different pH based on the combined Gouy-Chapman-Stern model and the acid dissociation of carboxy groups and antibodies. We observed that at low surface concentrations of the primary antibody, a side-on orientation was predominant. However, at higher concentrations (approximately 30000 antibodies per PS particle), the orientation shifted to an end-on type due to steric hindrance. Furthermore, the reaction mechanism of the secondary antibody exhibited pH-dependent behavior. At pH > 7, the zeta potential changes were attributed to the antibody-antibody reaction, whereas at pH < 7, adsorption of secondary antibody onto the PS particle was observed, leading to a change in the orientation of the primary antibody modified on the PS particle to an end-on type. The change in zeta potential due to secondary antibody binding indicated a detection limit of 37000 antibodies per PS particle. As a result, we revealed that the analysis of zeta potential behavior enables the evaluation of antibody orientation and the detection of zeptomole order antibodies. This study represents the first demonstration of this capability. We anticipate that the present concept and results will broaden the quantitative application of zeta potential measurements and have significant implications for research areas, including physical chemistry and analytical chemistry.

Combination of real-time and hyphenated mass spectrometry for improved characterisation of exhaled breath biomarkers in clinical research

Exhaled breath volatilomics is a powerful non-invasive tool for biomarker discovery in medical applications, but compound annotation is essential for pathophysiological insights and technology transfer. This study was aimed at investigating the interest of a hybrid approach combining real-time proton transfer reaction-time-of-flight mass spectrometry (PTR-TOF-MS) with comprehensive thermal desorption-two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (TD-GCxGC-TOF-MS) to enhance the analysis and characterization of VOCs in clinical research, using COVID-19 as a use case. VOC biomarker candidates were selected from clinical research using PTR-TOF-MS fingerprinting in patients with COVID-19 and matched to the Human Breathomic Database. Corresponding analytical standards were analysed using both a liquid calibration unit coupled to PTR-TOF-MS and TD-GCxGC-TOF-MS, together with confirmation on new clinical samples with TD-GCxGC-TOF-MS. From 26 potential VOC biomarkers, 23 were successfully detected with PTR-TOF-MS. All VOCs were successfully detected using TD-GCxGC-TOF-MS, providing effective separation of highly chemically related compounds, including isomers, and enabling high-confidence annotation based on two-dimensional chromatographic separation and mass spectra. Four VOCs were identified with a level 1 annotation in the clinical samples. For future applications, the combination of real-time PTR-TOF-MS and comprehensive TD-GCxGC-TOF-MS, at least on a subset of samples from a whole study, would enhance the performance of VOC annotation, offering potential advancements in biomarker discovery for clinical research.

BreathXplorer: Processing Online Breathomics Data Generated from Direct Analysis Using High-Resolution Mass Spectrometry

Nontargeted breath analysis in real time using high-resolution mass spectrometry (HRMS) is a promising approach for high coverage profiling of metabolites in human exhaled breath. However, the information-rich and unique non-Gaussian metabolic signal shapes of real-time HRMS-based data pose a significant challenge for efficient data processing. This work takes a typical real-time HRMS technique as an example, i.e. secondary electrospray ionization high-resolution mass spectrometry (SESI-HRMS), and presents BreathXplorer, an open-source Python package designed for the processing of real-time exhaled breath data comprising multiple exhalations. BreathXplorer is composed of four main modules. The first module applies either a topological algorithm or a Gaussian mixture model (GMM) to determine the start and end points of each exhalation. Next, density-based spatial clustering of applications with noise (DBSCAN) is employed to cluster m/z values belonging to the same metabolic feature, followed by applying an intensity relative standard deviation (RSD) filter to extract real breath metabolic features. BreathXplorer also offers functions of (1) feature alignment across the samples and (2) associating MS/MS spectra with their corresponding metabolic features for downstream compound annotation. Manual inspection of the metabolic features extracted from SESI-HRMS breath data suggests that BreathXplorer can achieve 100% accuracy in identifying the start and end points of each exhalation and acquire accurate quantitative measurements of each breath feature. In a proof-of-concept study on exercise breathomics using SESI-HRMS, BreathXplorer successfully reveals the significantly changed metabolites that are pertinent to exercise. BreathXplorer is publicly available on GitHub (https://github.com/HuanLab/breathXplorer). It provides a powerful and convenient-to-use tool for the researchers to process breathomics data obtained by directly analysis using HRMS.

Femtosecond Laser Ionization Mass Spectrometry for Online Analysis of Human Exhaled Breath

A variety of organic compounds in human exhaled breath were measured online by mass spectrometry using the fifth (206 nm) and fourth (257 nm) harmonic emissions of a femtosecond ytterbium (Yb) laser as the ionization source. Molecular ions were enhanced significantly by means of resonance-enhanced, two-color, two-photon ionization, which was useful for discrimination of analytes against the background. The limit of detection was 0.15 ppm for acetone in air. The concentration of acetone in exhaled breath was determined for three subjects to average 0.31 ppm, which lies within the range of normal healthy subjects and is appreciably lower than the range for patients with diabetes mellitus. Many other constituents, which could be assigned to acetaldehyde, ethanol, isoprene, phenol, octane, ethyl butanoate, indole, octanol, etc., were observed in the exhaled air. Therefore, the present approach shows potential for use in the online analysis of diabetes mellitus and also for the diagnosis of various diseases, such as COVID-19 and cancers.

GIS-Based Analysis of Volatile Organic Compounds in Bucheon, Korea, Using Mobile Laboratory and Proton-Transfer-Reaction Time-of-Flight Mass Spectrometry Methods

Recently, volatile organic compounds (VOCs) have been shown to act as precursors of secondary organic particles that react with ultraviolet rays in the atmosphere and contribute to photochemical smog, global warming, odor, and human health risks, highlighting the importance of VOC management. In this study, we measured VOC concentrations in various contexts including industrial and residential areas of Bucheon, Korea, through mobile laboratory and proton-transfer-reaction time-of-flight mass spectrometry methods to determine winter VOC concentrations and visualized the data based on spatial information. Regional characteristics, temperature/humidity, atmospheric conditions, wind speed, traffic volume, etc., during the measurement period of the study site were comprehensively reviewed. For this purpose, global information system (GIS)-based air quality data and various environmental variables were comprehensively reviewed to assess spatial and temporal concentrations in three dimensions rather than in tables and graphs. Among VOCs, the levels of toluene, methanol, and n + i-butene were relatively high, with average concentrations of 48.3 ± 67.2, 34.4 ± 102.7, and 32.6 ± 57.7 ppb, respectively, at the end of the working day. The highest concentrations occurred near the Ojeong Industrial Complex. Mobile pollution sources are also a major driver of VOCs, highlighting the necessity of comprehensively reviewing traffic variables such as road level, estimated traffic volume, and average speed when identifying hotspots of air pollution. GIS-based visualization analysis techniques will improve the efficiency of air quality management.

Impact of Different Carbon Sources on Volatile Organic Compounds (VOCs) Produced during Fermentation by Levilactobacillus brevis WLP672 Measured Using Proton Transfer Reaction Time-of-Flight Mass Spectrometry (PTR-ToF-MS)

Bacterial fermentation is considered to be a cost-effective means of generating desired flavour compounds from plant-based substrates. However, the wide range of substrates present in plants makes it challenging to understand how individual components impact on flavour volatile organic compound (VOC) production. To simplify this, a defined medium can be used to better understand VOCs production with regard to individual compounds. In the current study, the VOCs produced by the lactic acid bacterium, Levilactobacillus brevis WLP672, growing in a defined medium containing different carbon sources (either glucose (DM), fructose (DMFr) or citrate (DMCi)) under a range of fermentation conditions (time: 0, 7, and 14 days; and temperature: 25 and 35 °C) were assessed using proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS). Among the detected mass peaks (m/z), after 7 days of fermentation, the concentrations of m/z 45.033 (t.i. acetaldehyde), m/z 49.011 (t.i. methanethiol), and m/z 89.060 (t.i. ethyl acetate) were significantly (p < 0.05) higher in DM at 35 °C than all other treatments at either temperature. The knowledge obtained will help to produce desirable LAB fermentation flavour VOCs or VOC mixtures that could be used in developing plant-based analogues with acceptable sensory properties.

Evaluation of Terpene Decomposition in Kaffir Lime Juice during Storage Using Gas Chromatography-Mass Spectrometry and Proton Transfer Reaction-Mass Spectrometry

Kaffir lime juice, often treated as production waste, can be a good source of terpenes. These compounds undergo various decomposition processes under the influence of external factors, especially during transportation and storage. In this paper, it was possible to monitor changes in the terpene profile of kaffir lime juice under different storage conditions, namely, 4 °C, 20 °C, and 35 °C. The identification of key decomposition products was achieved using gas chromatography-mass spectrometry (GC-MS) and a data mining protocol. It was followed by tracing those products in different storage conditions using a high-throughput proton transfer reaction mass spectrometry (PTR-MS) approach. Based on our findings, degradation pathways were presented, showing that the main products resulting from storage are p-cymene, p-cymenene, terpinene-4-ol, and α-terpineol. It was shown that conversion to p-cymenene occurs after 5 days of storage. Terpinene-4-ol and α-terpineol were found to be the final products of the conversion at all temperatures. Changes in the composition of terpenes are important from the point of view of their bioactive properties.

Hollow Cathode Discharge Ionization Mass Spectrometry: Detection, Quantification and Gas Phase Ion-Molecule Reactions of Explosives and Related Compounds

Mass spectrometry (MS) has become an essential analytical method in every sector of science and technology. Because of its unique ability to provide direct molecular structure information on analytes, an extra method is rarely required. This review describes fabrication of a variable-pressure hollow cathode discharge (HCD) ion source for MS in detection, quantification and investigation of gas-phase ion molecule reactions of explosives and related compounds using air as a carrier gas. The HCD ion source has been designed in such a way that by altering the ion source pressures, the system can generate both HCD and conventional GD. This design enables for the selective detection and quantification of explosives at trace to ultra-trace levels. The pressure-dependent HCD ion source has also been used to investigate ion-molecule reactions in the gas phase of explosives and related compounds. The mechanism of ion formation in explosive reactions is also discussed.

Biogenic volatile organic compounds dominated the near-surface ozone generation in Sichuan Basin, China, during fall and wintertime

The complex air pollution driven by both Ozone (O3) and fine particulate matter (PM2.5) significantly influences the air quality in the Sichuan Basin (SCB). Understanding the O3 formation during autumn and winter is necessary to understand the atmospheric oxidative capacity. Therefore, continuous in-site field observations were carried out during the late summer, early autumn and winter of 2020 in a rural area of Chongqing. The total volatile organic compounds (VOCs) concentration reported by a Proton-Transfer-Reaction Time-of-Flight Mass Spectrometry (PTR-ToF-MS) were 13.66 ± 9.75 ppb, 5.50 ± 2.64 ppb, and 9.41 ± 5.11 ppb in late summer, early autumn and winter, respectively. The anthropogenic VOCs (AVOCs) and biogenic VOCs (BVOCs) were 8.48 ± 7.92 ppb and 5.18 ± 2.99 ppb in late summer, 3.31 ± 1.89 ppb and 2.19 ± 0.93 ppb in autumn, and 6.22 ± 3.99 ppb and 3.20 ± 1.27 ppb in winter. A zero-dimensional atmospheric box model was employed to investigate the sensitivity of O3-precursors by relative incremental reactivity (RIR). The RIR values of AVOCs, BVOCs, carbon monoxide (CO), and nitrogen oxides (NOx) were 0.31, 0.71, 0.09, and -0.36 for late summer, 0.24, 0.59, 0.22, and -0.38 for early autumn, and 0.30, 0.64, 0.33 and -0.70 for winter, and the results showed that the O3 formation of sampling area was in the VOC-limited region, and O3 was most sensitive to BVOCs (with highest RIR values, > 0.6). This study can be helpful in understanding O3 formation and interpreting the secondary formation of aerosols in the winter.

Evaluation of particle and volatile organic compound emissions during the use of 3D pens

This study investigated particle and volatile organic compound (VOC) emission rates (ER) from 3D pens, which are increasingly popular in children's toys. Nine filaments and two 3D pens were evaluated using a flow tunnel, a scanning mobility particle sizer, a proton-transfer-reaction time-of-flight mass spectrometer for particles, and a thermal desorption-gas chromatography-mass spectrometer for VOCs. Results showed that the ERs varied with the pen type, filament, and brand. The particle ER was highest for acrylonitrile butadiene styrene (ABS), followed by polylactic acid (PLA) and polycaprolactone (PCL). Notably, ERs of 83 % and 33 % of ABS and PLA filaments exceeded the maximum allowable particle ER (MAER; 5 × 109 particles/min) for 3D printers but were lower than the VOC MAER (173 μg/min in the office). Different filaments emitted diverse VOCs; ABS emitted styrene and benzene, PLA emitted lactide, and PCL emitted phenol. While particle ERs from 3D pens were comparable to those from printers, the total VOC ERs from 3D pens were slightly lower. Caution is warranted when using 3D pens because of potential health risks, especially their prolonged use, proximity to the breathing zone, and usage by children. This study highlights the need for considering particles and VOCs when assessing the safety of 3D pens, emphasizing awareness of potential hazards, particularly in child-oriented settings.

Exhaled breath analysis in adult patients with cystic fibrosis by real-time proton mass spectrometry

BACKGROUND

Proton-transfer reaction time-of-flight mass spectrometry (PTR-TOF-MS) is a promising tool for a rapid online determination of exhaled volatile organic compounds (eVOCs) profiles in patients with cystic fibrosis (CF).

OBJECTIVE

To detect VOC breath signatures specific to adult patients with CF compared with controls using PTR-TOF-MS.

METHODS

102 CF patients (54 M/48, mean age 25.6 ± 7.8 yrs) and 97 healthy controls (56 M/41F, mean age 25.8 ± 6.0 yrs) were examined. Samples from normal quiet breathing and forced expiratory maneuvers were analyzed with PTR-TOF-MS (Ionicon, Austria) to obtain VOC profiles listed as ions at various mass-to-charge ratios (m/z).

RESULTS

PTR-TOF-MS analysis was able to detect 167 features in exhaled breath from CF patients and healthy controls. According to cluster analysis and LASSO regression, patients with CF and controls were separated. The most significant VOCs for CF were indole, phenol, dimethyl sulfide, and not indicated: m/z = 297.0720 ([C12H13N2O7 and C17H13O5]H + ), m/z = 281.0534 ([C19H7NO2, C12H11NO7 and C16H9O5]H + ) during five-fold cross-validation both in forced expiratory maneuver and in normal quiet breathing.

CONCLUSION

PTR-TOF-MS is a promising method for determining the molecular composition of exhaled air specific to CF.

How Does Personal Hygiene Influence Indoor Air Quality?

Humans are known to be a continuous and potent indoor source of volatile organic compounds (VOCs). However, little is known about how personal hygiene, in terms of showering frequency, can influence these emissions and their impact on indoor air chemistry involving ozone. In this study, we characterized the VOC composition of the air in a controlled climate chamber (22.5 m3 with an air change rate at 3.2 h-1) occupied by four male volunteers on successive days under ozone-free (∼0 ppb) and ozone-present (37-40 ppb) conditions. The volunteers either showered the evening prior to the experiments or skipped showering for 24 and 48 h. Reduced shower frequency increased human emissions of gas-phase carboxylic acids, possibly originating from skin bacteria. With ozone present, increasing the number of no-shower days enhanced ozone-skin surface reactions, yielding higher levels of oxidation products. Wearing the same clothing over several days reduced the level of compounds generated from clothing-ozone reactions. When skin lotion was applied, the yield of the skin ozonolysis products decreased, while other compounds increased due to ozone reactions with lotion ingredients. These findings help determine the degree to which personal hygiene choices affect the indoor air composition and indoor air exposures.

Unravelling the origin of isoprene in the human body-a forty year Odyssey

In the breath research community's search for volatile organic compounds that can act as non-invasive biomarkers for various diseases, hundreds of endogenous volatiles have been discovered. Whilst these systemic chemicals result from normal and abnormal metabolic activities or pathological disorders, to date very few are of any use for the development of clinical breath tests that could be used for disease diagnosis or to monitor therapeutic treatments. The reasons for this lack of application are manifold and complex, and these complications either limit or ultimately inhibit the analytical application of endogenous volatiles for use in the medical sciences. One such complication is a lack of knowledge on the biological origins of the endogenous volatiles. A major exception to this is isoprene. Since 1984, i.e. for 40 years, it has been generally accepted that the pathway to the production of human isoprene, and hence the origin of isoprene in exhaled breath, is through cholesterol biosynthesis via the mevalonate (MVA) pathway within the liver. However, various studies between 2001 and 2012 provide compelling evidence that human isoprene is produced in skeletal muscle tissue. A recent multi-omic investigation of genes and metabolites has revealed that this proposal is correct by showing that human isoprene predominantly results from muscular lipolytic cholesterol metabolism. Despite the overwhelming proof for a muscular pathway to isoprene production in the human body, breath research papers still reference the hepatic MVA pathway. The major aim of this perspective is to review the evidence that leads to a correct interpretation for the origins of human isoprene, so that the major pathway to human isoprene production is understood and appropriately disseminated. This is important, because an accurate attribution to the endogenous origins of isoprene is needed if exhaled isoprene levels are to be correctly interpreted and for assessing isoprene as a clinical biomarker.

Enhancing Odor Analysis with Gas Chromatography-Olfactometry (GC-O): Recent Breakthroughs and Challenges

Gas chromatography-olfactometry (GC-O) has made significant advancements in recent years, with breakthroughs in its applications and the identification of its limitations. This technology is widely used for analyzing complex odor patterns. The review begins by explaining the principles of GC-O, including sample preparation, separation methods, and olfactory evaluation techniques. It then explores the diverse range of applications where GC-O has found success, such as food and beverage industries, environmental monitoring, perfume and aroma development, and forensic analysis. One of the major breakthroughs in GC-O analysis is the improvement in separation power and resolution of odorants. Techniques like rapid GC, comprehensive two-dimensional GC, and multidimensional GC have enhanced the identification and quantification of odor-active chemicals. However, GC-O also has limitations. These include the challenges in detecting and quantifying trace odorants, dealing with matrix effects, and ensuring the repeatability and consistency of results across laboratories. The review examines these limitations closely and discusses potential solutions and future directions for improvement in GC-O analysis. Overall, this review presents a comprehensive overview of the recent advances in GC-O, covering breakthroughs, applications, and limitations. It aims to promote the wider usage of GC-O analysis in odor analysis and related industries. Researchers, practitioners, and anyone interested in leveraging the capabilities of GC-O in analyzing complex odor patterns will find this review a valuable resource. The article highlights the potential of GC-O and encourages further research and development in the field.

Fractional-Order Electrical Modeling of Aluminum Coated via Plasma Electro-Oxidation and Thermal Spray Methods to Optimize Radiofrequency Medical Devices

Active medical devices rely on a source of energy that is applied to the human body for specific purposes such as electrosurgery, ultrasounds for breaking up kidney stones (lithotripsy), laser irradiation, and other medical techniques and procedures that are extensively used. These systems must provide adequate working power with a commitment not to produce side effects on patients. Therefore, the materials used in these devices must effectively transmit energy, allow for security control, sense real-time variations in case of any issues, and ensure the implementation of closed-loop systems for control. This work extends to the experimental data adjustment of some different coating techniques based on plasma electro-oxidation (PEO) and thermal spray (TS) using fractional-order models. According to the physical structure of the coating in different coating techniques, Cole family models were selected. The experimental data were obtained by means of a vector network analyzer (VNA) in the frequency spectrum from 0.3 MHz to 5 MHz. The results show that some models from the Cole family (the single-dispersion model and inductive model) offered a goodness of fit to the experimental impedance in terms of RMSE error and a squared error R2 close to unity. The use of this type of fractional-order electrical model allows an adjustment with a very small number of elements compared to integer-order models, facilitating its use and a consequent reduction in instrumentation cost and the development of control devices that are more robust and easily miniaturized for embedded applications. Additionally, fractional-order models allow for more accurate assessment in industrial and medical applications.

Comb spectroscopy of CO2 produced from microbial metabolism

We have developed a direct frequency comb spectroscopy instrument, which we have tested on Saccharomyces cerevisiae (baker's yeast) by measuring its CO2 output and production rate as we varied the environmental conditions, including the amount and type of feed sugar, the temperature, and the amount of yeast. By feeding isotopically-enhanced sugar to the yeast, we demonstrate the capability of our device to differentiate between two isotopologues of CO2, with a concentration measurement precision of 260 ppm for 12C16O2 and 175 ppm for 13C16O2. We also demonstrate the ability of our spectrometer to measure the proportion of carbon in the feed sugar converted to CO2, and estimate the amount incorporated into the yeast biomass.

Interaction of the III-As monolayer with SARS-CoV-2 biomarkers: implications for biosensor development

The emergence of SARS-CoV-2 in 2019 led to the global COVID-19 pandemic, highlighting the urgency for developing cost-effective and non-invasive methods to detect diseases at an early stage. Human breath, rich in volatile organic compounds (VOCs), is promising for cost-effective and rapid disease detection, with specific VOCs like methanol, ethanal, butanone, acetone, and ethyl butyrate linked to COVID-19. Recent advances in biomarker detection and gas sensing with 2D materials, particularly III-As monolayers like BAs, GaAs, and AlAs, offer high sensitivity at low concentrations, providing a novel avenue for exploring their potential in detecting COVID-19 biomarkers. This article aims to examine the effects of adsorption on different properties of III-Arsenide (BAs, GaAs and AlAs) monolayers, particularly in connection with SARS-CoV-2 biomarkers. In order to examine the interaction between the monolayers and biomarkers, first-principles computations within the framework of density functional theory (DFT) are utilized. The present study involves an investigation of the modifications in the band structure, density of states (DOS), work function, electron density difference, and optical properties (reflectance and absorbance) of III-As monolayers, with the aim of assessing their viability for the detection of SARS-CoV-2 biomarkers along with interfering gases such as CO2 and H2O. It is observed that VOCs induce a notable change in the work function of GaAs which serves as an indicator of the presence of these biomarkers. However, the changes in work function are not as substantial as those for AlAs and BAs. Additionally, the chemiresistive sensitivity, optical sensitivity and recovery time of III-As are investigated. The findings suggest that the pristine GaAs monolayer displays a significant level of sensitivity and selectivity towards the SARS-CoV-2 biomarkers, rendering it a material with potential for utilization in sensing applications. Furthermore, it has been observed that the recovery time of the GaAs monolayer subsequent to its exposure to the VOC biomarkers lies within an acceptable threshold. Upon exposure to UV light, the recovery time is further reduced. The outcomes of our study indicate that GaAs monolayers exhibit considerable potential as chemiresistive, work function-based and optical sensors for the precise and discerning identification of VOCs linked to the SARS-CoV-2 virus compared to the other two III-As monolayers.

Impact of temperature-dependent non-PAN peroxynitrate formation, RO2NO2, on nighttime atmospheric chemistry

The formation of peroxynitrates (RO2NO2) from the reaction of peroxy radicals (RO2) and nitrogen dioxide (NO2) and their subsequent redissociation are typically not included in chemical mechanisms. This is often done to save computational time as the assumption is that the equilibrium is strongly towards the RO2 + NO2 reaction for most conditions. Exceptions are the reactions of the methyl peroxy radical due to its abundance in the atmosphere and of acyl-RO2 radicals due to the long lifetime of peroxyacyl nitrates RO2NO2 (PANs). In this study, the nighttime oxidation of cis-2-butene and trans-2-hexene in the presence of NO2 is investigated in the atmospheric simulation chamber SAPHIR, Forschungszentrum Jülich, Germany, at atmospherically-relevant conditions at different temperatures (≈276 K, ≈293 K, ≈305 K). Measured concentrations of peroxy and hydroperoxy radicals as well as other trace gases (ozone, NO2, volatile organic compounds) are compared to state-of-the-art zero-dimensional box model calculations. Good model-measurement agreement can only be achieved when reversible RO2 + NO2 reactions are included for all RO2 species using literature values available from the latest SAR by [Jenkin et al., Atmos. Chem. Phys., 2019, 19, 7691]. The good agreement observed gives confidence that the SAR, derived originally for aliphatic RO2, can be applied to a large range of substituted RO2 radicals, simplifying generalised implementation in chemical models. RO2NO2 concentrations from non-acyl RO2 radicals of up to 2 × 10 cm-3 are predicted at 276 K, impacting effectively the kinetics of RO2 radicals. Under these conditions, peroxy radicals are slowly regenerated downwind of the pollution source and may be lost in the atmosphere through deposition of RO2NO2. Based on this study, 60% of RO2 radicals would be stored as RO2NO2 at a temperature of 10 °C and in the presence of a few ppbv of NO2. The fraction increases further at colder temperatures and/or higher NO2 mixing ratios. This does not only affect the expected concentrations of RO2 radicals but, as the peroxynitrates can react with OH radicals or photolyse, they could comprise a net sink for RO2 radicals as well as increase the production of NOx (= NO + NO2) in different locations depending on their lifetime. Omitting this chemistry from the kinetic model can lead to misinterpreted product formation and may prevent reconciling observations and model predictions.

Analysis of VOCs in Liquids through Vaporization in a Tubular Oven Monitored by Chemical Ionization Mass Spectrometry

The analysis of chemical compounds present at trace levels in liquids is important not only for environmental measurements but also, for example, in the health sector. The reference technique for the analysis of Volatile Organic Compounds (VOCs) in liquids is GC, which is difficult to use with an aqueous matrix. In this work, we present an alternative technique to GC to analyze VOCs in water. A tubular oven is used to completely vaporize the liquid sample deposited on a gauze. The oven is heated in the presence of a dinitrogen flow, and the gas is analyzed at the exit of the oven by a chemical ionization mass spectrometer developed in our laboratory. It is a low magnetic field Fourier Transform Ion Cyclotron Resonance (FT-ICR) optimized for real-time analysis. The Proton Transfer Reaction (PTR) used during the Chemical Ionization event results in the selective ionization of the VOCs present in the gas phase. The optimization of the desorption conditions is described for the main operating parameters: temperature ramp, liquid quantity, and nitrogen flow. Their influence is studied using a 100 ppmv aqueous toluene solution. The analytical method is then tested on a mixture of seven VOCs.

Nitrate Radicals Suppress Biogenic New Particle Formation from Monoterpene Oxidation

Highly oxygenated organic molecules (HOMs) are a major source of new particles that affect the Earth's climate. HOM production from the oxidation of volatile organic compounds (VOCs) occurs during both the day and night and can lead to new particle formation (NPF). However, NPF involving organic vapors has been reported much more often during the daytime than during nighttime. Here, we show that the nitrate radicals (NO3), which arise predominantly at night, inhibit NPF during the oxidation of monoterpenes based on three lines of observational evidence: NPF experiments in the CLOUD (Cosmics Leaving OUtdoor Droplets) chamber at CERN (European Organization for Nuclear Research), radical chemistry experiments using an oxidation flow reactor, and field observations in a wetland that occasionally exhibits nocturnal NPF. Nitrooxy-peroxy radicals formed from NO3 chemistry suppress the production of ultralow-volatility organic compounds (ULVOCs) responsible for biogenic NPF, which are covalently bound peroxy radical (RO2) dimer association products. The ULVOC yield of α-pinene in the presence of NO3 is one-fifth of that resulting from ozone chemistry alone. Even trace amounts of NO3 radicals, at sub-parts per trillion level, suppress the NPF rate by a factor of 4. Ambient observations further confirm that when NO3 chemistry is involved, monoterpene NPF is completely turned off. Our results explain the frequent absence of nocturnal biogenic NPF in monoterpene (α-pinene)-rich environments.

Siloxane Emissions and Exposures during the Use of Hair Care Products in Buildings

Cyclic volatile methyl siloxanes (cVMS) are ubiquitous in hair care products (HCPs). cVMS emissions from HCPs are of concern, given the potential adverse impact of siloxanes on the environment and human health. To characterize cVMS emissions and exposures during the use of HCPs, realistic hair care experiments were conducted in a residential building. Siloxane-based HCPs were tested using common hair styling techniques, including straightening, curling, waving, and oiling. VOC concentrations were measured via proton-transfer-reaction time-of-flight mass spectrometry. HCP use drove rapid changes in the chemical composition of the indoor atmosphere. cVMS dominated VOC emissions from HCP use, and decamethylcyclopentasiloxane (D5) contributed the most to cVMS emissions. cVMS emission factors (EFs) during hair care routines ranged from 110-1500 mg/person and were influenced by HCP type, styling tools, operation temperatures, and hair length. The high temperature of styling tools and the high surface area of hair enhanced VOC emissions. Increasing the hair straightener temperature from room temperature to 210 °C increased cVMS EFs by 50-310%. Elevated indoor cVMS concentrations can result in substantial indoor-to-outdoor transport of cVMS via ventilation (0.4-6 tons D5/year in the U.S.); thus, hair care routines may augment the abundance of cVMS in the outdoor atmosphere.

Monitoring of n-hexane degradation in a plasma reactor by chemical ionization mass spectrometry

n-Hexane (C6H14) removal and conversion are investigated in a filamentary plasma generated by a pulsed high-voltage Dielectric Barrier Discharge (DBD) at atmospheric pressure and room temperature in a dry N2/O2 (20%) mixture with C6H14. The degradation of n-hexane and the by-product formation are analyzed in real-time using a high-resolution Fourier Transform Ion Cyclotron Resonance (FT-ICR) mass spectrometer coupled with Chemical Ionization (CI). As alkanes are reacting slowly with H3O+ ions, two precursor ions were used: O2+ to follow the n-hexane mixing ratios and H3O+ to follow the mixing ratios of organic by-products. As the CI-FTICR technique can work at high mixing ratios, studies were made between 5 and 200 ppm of n-hexane. Absorption spectroscopy is also used to follow ozone and carbon dioxide molecules. We show that the DBD efficiency increases for lower n-hexane mixing ratios and a large number of by-products are identified, with the major compounds being: formaldehyde, acetaldehyde, propanal, carbon dioxide, and carbon monoxide along with nitrate compounds. Based on the nature of the by-products characterized, a mechanism accounting for their formation is proposed.

Comparative Analysis of Volatile Organic Compound Purification Techniques in Complex Cooking Emissions: Adsorption, Photocatalysis and Combined Systems

Volatile organic compounds (VOCs) are molecules present in our everyday life, and they can be positive, such as in the formation of odour and food flavour, or harmful to the environment and humans, and research is focusing on limiting their emissions. Various methods have been used to achieve this purpose. Firstly, we review three main degradation methods: activated carbon, photocatalysis and a synergetic system. We provide a general overview of the operative conditions and report the possibility of VOC abatement during cooking. Within the literature, none of these systems has ever been tested in the presence of complex matrices, such as during cooking processes. The aim of this study is to compare the three methods in order to understand the behaviour of filter systems in the case of realistically complex gas mixtures. Proton transfer reaction-mass spectrometry (PTR-MS) has been used in the real-time monitoring of volatilome. Due to the fact that VOC emissions are highly dependent on the composition of the food cooked, we evaluated the degradation capacity of the three systems for different burger types (meat, greens, and fish). We demonstrate the pros and cons of photocatalysis and adsorption and how a combined approach can mitigate the drawbacks of photocatalysis.

The Physical and Structural Effects of 1-MCP on Four Different Apple Cultivars during Storage

The impact of the ethylene inhibitor, 1-methylcyclopropene (1-MCP), on four apple cultivars (Braeburn, Fuji, Jazz and Golden Delicious) over 150 days of storage at 2 °C was assessed. Proton transfer reaction quadrupole mass spectrometry (PTR-QUAD-MS) was used to monitor changes in VOC composition, while texture analysis and X-ray microcomputer tomography (µ-CT) scanning were used to study microstructural changes. The application of 1-MCP on apples reduced VOC emissions, concurrently maintaining a firmer texture compared to the untreated apples at each time point. The µ-CT scanning revealed how changes in specific morphological characteristics such as anisotropy, connectivity and porosity, size and shape, as well as the interconnectivity of intracellular spaces (IS) influenced texture even when porosity was similar. Additionally, this study showed that the porosity and connectivity of IS were associated with VOC emission and increased simultaneously. This study highlights how the morphological parameters of an apple can help explain their ripening process during long-term storage and how their microstructure can influence the release of VOCs.

Prediction of the Response of a Photoionization Detector to a Complex Gaseous Mixture of Volatile Organic Compounds Produced by α-Pinene Oxidation

Photoionization detectors (PIDs) are lightweight and respond in real time to the concentrations of volatile organic compounds (VOCs), making them suitable for environmental measurements on many platforms. However, the nonselective sensing mechanism of PIDs challenges data interpretation, particularly when exposed to the complex VOC mixtures prevalent in the Earth's atmosphere. Herein, two approaches to this challenge are investigated. In the first, quantum-chemistry calculations are used to estimate photoionization cross sections and ionization potentials of individual species. In the second, machine learning models are trained on these calculated values, as well as empirical PID response factors, and then used for prediction. For both approaches, the resulting information for individual species is used to model the overall PID response to a complex VOC mixture. In complement, laboratory experiments in the Harvard Environmental Chamber are carried out to measure the PID response to the complex molecular mixture produced by α-pinene oxidation under various conditions. The observations show that the measured PID response is 15% to 30% smaller than the PID response modeled by quantum-chemistry calculations of the photoionization cross section for the photo-oxidation experiments and 15% to 20% for the ozonolysis experiments. By comparison, the measured PID response is captured within a 95% confidence interval by the use of machine learning to model the PID response based on the empirical response factor in all experiments. Taken together, the results of this study demonstrate the application of machine learning to augment the performance of a nonselective chemical sensor. The approach can be generalized to other reactive species, oxidants, and reaction mechanisms, thus enhancing the utility and interpretability of PID measurements for studying atmospheric VOCs.

Dynamic Instrumental and Sensory Methods Used to Link Aroma Release and Aroma Perception: A Review

Perception of flavor is a dynamic process during which the concentration of aroma molecules at the olfactory epithelium varies with time as they are released progressively from the food in the mouth during consumption. The release kinetics depends on the food matrix itself but also on food oral processing, such as mastication behavior and food bolus formation with saliva, for which huge inter-individual variations exist due to physiological differences. Sensory methods such as time intensity (TI) or the more-recent methods temporal dominance of sensations (TDS) and temporal check-all-that-apply (TCATA) are used to account for the dynamic and time-related aspects of flavor perception. Direct injection mass spectrometry (DIMS) techniques that measure in real time aroma compounds directly in the nose (nosespace), aimed at obtaining data that reflect the pattern of aroma release in real time during food consumption and supposed to be representative of perception, have been developed over the last 25 years. Examples obtained with MS operated in chemical ionization mode at atmospheric or sub-atmospheric pressure (atmospheric pressure chemical ionization APCI or proton-transfer reaction PTR) are given, with emphases on studies conducted with simultaneous dynamic sensory evaluation. Inter-individual variations in terms of aroma release and their relevance for understanding flavor perception are discussed as well as the evidenced cross-modal interactions.

Ultrahigh Sensitivity PTR-MS Instrument with a Well-Defined Ion Chemistry

Proton-transfer-reaction mass spectrometry (PTR-MS) is widely used for measuring organic trace gases in air. In traditional PTR-MS, both nonpolar and polar analytes are ionized with unit efficiency, as predicted from ion-molecule collision theories. This well-defined ion chemistry allows for direct quantification of analytes without prior calibration and therefore is an important characteristic of PTR-MS. In an effort to further increase the sensitivity, recently developed ultrahigh sensitivity chemical ionization mass spectrometry (CIMS) analyzers have, however, been reported to have sacrificed unit ionization efficiency for selected analytes or classes of analytes. We herein report on the development of a novel ultrasensitive PTR-MS instrument, the FUSION PTR-TOF 10k, which exhibits the same universal unit response as conventional PTR-MS analyzers. The core component of this analyzer is the newly designed FUSION ion-molecule reactor, which is a stack of concentric ring electrodes generating a static longitudinal electric field superimposed by a focusing transversal radiofrequency (RF) field. The FUSION PTR-TOF 10k instrument is equipped with an improved ion source, capable of switching between different reagent ions (H3O+, O2+, NO+, NH4+) in less than one second. The improved time-of-flight mass spectrometer analyzes m/z signals with a mass resolution in the 10000-15000 range. FUSION PTR-TOF 10k achieves sensitivities up to 80000 cps ppbV-1 and detection limits down to 0.5 pptV for a 1 s measurement time. We show time-series of naphthalene and 13C-napthalene as measured in ambient air in Innsbruck for demonstrating the sub-pptV detection capability of this novel FUSION PTR-TOF 10k.

Direct mass spectrometry analysis of exhaled human breath in real-time

The molecular composition of exhaled human breath can reflect various physiological and pathological conditions. Considerable progress has been achieved over the past decade in real-time analysis of exhaled human breath using direct mass spectrometry methods, including selected ion flow tube mass spectrometry, proton transfer reaction mass spectrometry, extractive electrospray ionization mass spectrometry, secondary electrospray ionization mass spectrometry, acetone-assisted negative photoionization mass spectrometry, atmospheric pressure photoionization mass spectrometry, and low-pressure photoionization mass spectrometry. Here, recent developments in direct mass spectrometry analysis of exhaled human breath are reviewed with regard to analytical performance (chemical sensitivity, selectivity, quantitative capabilities) and applications of the developed methods in disease diagnosis, targeted molecular detection, and real-time metabolic monitoring.

Analysis of Volatile Esters and Alkanoic Acids by an Atmospheric Pressure Corona Discharge Ionization Collision-Induced Dissociation Mass Spectrometry in Positive-Ion Mode: Ionization, Fragmentation Patterns, and Discrimination between Isomeric Compounds

The ionization and fragmentation patterns of 24 compounds with elemental composition of CmH2mO2, including isomeric esters and alkanoic acids, were investigated by atmospheric pressure corona discharge ionization collision-induced dissociation (CID) mass spectrometry in the positive-ion mode. All compounds were ionized as protonated molecules and NH4+ adducts. In addition, fragment ions were observed in mass spectra of esters other than methyl esters, which are owing to the dissociation of the alkyl group in the alcohol side from the protonated molecules. In CID spectra, protonated alkanoic acids/methyl esters split off H2O/CH3OH and CO or the alkyl group in the acid side, depending on the carbon chain length. Protonated esters (other than methyl esters) mainly fragmented the alkyl group in the alcohol side. These general rules on ionization and fragmentation patterns can provide relevant information on the discrimination of isomers.

Sweat and odor in sportswear - A review

Sportswear worn next to the skin is easily soaked by sweat and may become a breeding ground for the microbiome, thus a source of malodor. Malodor can cause social embarrassment and discomfort to both wearer and others. Given the risks current deodorant products pose to nature and human life, the development of sustainable textiles for odor control comes to the forefront. This review introduces the odor-generating mechanism in clothing from the perspectives of perspiration composition and cutaneous microbiome. With the knowledge of the significant role of sweat in odor formation, the sweat distribution of the human body, measurement techniques, and advanced technologies developed for quick-dry function are presented in the second part. Lastly, odor management in sportswear is evaluated, covering the odor-assessing techniques, the effects of various textile materials, and emerging solutions in terms of antibacterial treatment, adsorbent materials, and photocatalytic degradations of odorous compounds. Overall, it is of both personal and social value to develop novel textile materials with odor-control functions by making use of natural materials and fabric designs.

Mass spectrometry in the study of wood compounds released in the barrel-aged wine and spirits

Aging of wines and spirits in wooden barrels is an industrial process used to stabilize the color, to improve the limpidity and to enrich the sensorial characteristics of the products. In red wines, the oxygen that permeates through the wood staves promotes the oxidization of polyphenols and the formation of new pigments with consequent stabilization of the wine color. Barrel aging of spirits, such as brandy, whisky, rum, and grappa is finalized to enrich their aroma and improve their sensorial characteristics by the contribute of the compounds released by the wood. Oak is the wood type mostly used in making barrels; however, an increasing interest in the use of chestnut, cherry, acacia, and in less extent, ash and mulberry, has been observed in the recent years. Gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry are the main techniques used to characterize respectively the volatile and polar metabolites released by the wood barrels in the products. In this article are reported the recent advancements in this field.

Proton-transfer rate constants for the determination of organic indoor air pollutants by online mass spectrometry

Proton transfer reaction mass spectrometry (PTR-MS) has become an indispensable analytical tool for indoor related sciences. With high-resolution techniques not only is the online monitoring of the selected ions in the gas phase possible, but also, with some limitations, the identification of substance mixtures without chromatographic separation. The quantification is carried out with the help of kinetic laws, which require knowledge of the conditions in the reaction chamber, the reduced ion moblilities and the reaction rate constant k_PT under these conditions. Ion-dipole collision theory can be used to calculate k_PT. One approach is an extension of Langevin's equation and is known as average dipole orientation (ADO). In a further development, the analytical solution of ADO was replaced by trajectory analysis, which resulted in capture theory. The calculations according to ADO and capture theory require precise knowledge of the dipole moment and the polarizability of the respective target molecule. However, for many relevant indoor related substances, these data are insufficiently known or not known at all. Consequently, the dipole moment μ_D and polarizability α of 114 organic compounds that are frequently found in indoor air had to be determined using advanced quantum mechanical methods. This required the development of an automated workflow that performs conformer analysis before computing μ_D and α using density functional theory (DFT). Then the reaction rate constants with the H₃O⁺ ion are calculated according to the ADO theory (k_ADO), capture theory (k_cap) and advanced capture theory for different conditions in the reaction chamber. The kinetic parameters are evaluated with regard to their plausibility and critically discussed for their applicability in PTR-MS measurements.

Volatile organic compounds measured by proton transfer reaction mass spectrometry over the complex terrain of Quintero Bay, Central Chile

This research provides new evidence regarding the different kinds of air quality episodes, and their underlying mechanisms, that frequently impact the urban area of Quintero Bay in Central Chile, which is located along complex coastal terrain and is surrounded by industries. The monitoring campaign was carried out in January 2022 and encompassed two distinctive meteorological regimes. The first part of the month was dominated by a coastal low centered to the south of Quintero, which resulted in prevailing northerly flow (or weak southerlies) and a deep cloud-topped marine boundary layer. After a 2-3-day transition, the latter collapsed, and a clear-sky regime ensued, which was characterized by a shallow boundary layer and strong southerly winds during the daytime that lasted until the end of the campaign. By using proton transfer reaction time of flight mass spectrometry (PTR-TOF-MS) at a high temporal resolution (1 s), we measured high levels of volatile organic compounds (VOCs) during air quality episodes in real time. The episodes detected were associated with different prevailing meteorological regimes, suggesting that different point sources were involved. In the first episode, propene/cyclopropane, butenes, benzene, toluene and ethylbenzene/xylenes were associated with north and northwesterly weak winds. Complaints associated with hydrocarbon odor were reported. The pollution originated from industrial and petrochemical units located to the north of Quintero, which transport and store natural gas, liquified petroleum gas and oil. The second episode was linked to an oil refinery located south of our measurement site. In this case, high levels of phenol, furan and cresols occurred under strong southwesterly winds. During this event, headaches and dizziness were reported. By contrast, the levels of other aromatic compounds (benzene, toluene, ethylbenzene/xylenes) were lower than in the first air pollution episode.

A novel VOC breath tracer method to evaluate indoor respiratory exposures in the near- and far-fields; implications for the spread of respiratory viruses

BACKGROUND

Several studies suggest that far-field transmission (>6 ft) explains a significant number of COVID-19 superspreading outbreaks.

OBJECTIVE

Therefore, quantifying the ratio of near- and far-field exposure to emissions from a source is key to better understanding human-to-human airborne infectious disease transmission and associated risks.

METHODS

In this study, we used an environmentally-controlled chamber to measure volatile organic compounds (VOCs) released from a healthy participant who consumed breath mints, which contained unique tracer compounds. Tracer measurements were made at 0.76 m (2.5 ft), 1.52 m (5 ft), 2.28 m (7.5 ft) from the participant, as well as in the exhaust plenum of the chamber.

RESULTS

We observed that 0.76 m (2.5 ft) trials had ~36-44% higher concentrations than other distances during the first 20 minutes of experiments, highlighting the importance of the near-field exposure relative to the far-field before virus-laden respiratory aerosol plumes are continuously mixed into the far-field. However, for the conditions studied, the concentrations of human-sourced tracers after 20 minutes and approaching the end of the 60-minute trials at 0.76 m, 1.52 m, and 2.28 m were only ~18%, ~11%, and ~7.5% higher than volume-averaged concentrations, respectively.

SIGNIFICANCE

This study suggests that for rooms with similar airflow parameters disease transmission risk is dominated by near-field exposures for shorter event durations (e.g., initial 20-25-minutes of event) whereas far-field exposures are critical throughout the entire event and are increasingly more important for longer event durations.

IMPACT STATEMENT

We offer a novel methodology for studying the fate and transport of airborne bioaerosols in indoor spaces using VOCs as unique proxies for bioaerosols. We provide evidence that real-time measurement of VOCs can be applied in settings with human subjects to estimate the concentration of bioaerosol at different distances from the emitter. We also improve upon the conventional assumption that a well-mixed room exhibits instantaneous and perfect mixing by addressing spatial distances and mixing over time. We quantitatively assessed the exposure levels to breath tracers at alternate distances and provided more insights into the changes on "near-field to far-field" ratios over time. This method can be used in future to estimate the benefits of alternate environmental conditions and occupant behaviors.

Smelling the Disease: Diagnostic Potential of Breath Analysis

Breath analysis is a relatively recent field of research with much promise in scientific and clinical studies. Breath contains endogenously produced volatile organic components (VOCs) resulting from metabolites of ingested precursors, gut and air-passage bacteria, environmental contacts, etc. Numerous recent studies have suggested changes in breath composition during the course of many diseases, and breath analysis may lead to the diagnosis of such diseases. Therefore, it is important to identify the disease-specific variations in the concentration of breath to diagnose the diseases. In this review, we explore methods that are used to detect VOCs in laboratory settings, VOC constituents in exhaled air and other body fluids (e.g., sweat, saliva, skin, urine, blood, fecal matter, vaginal secretions, etc.), VOC identification in various diseases, and recently developed electronic (E)-nose-based sensors to detect VOCs. Identifying such VOCs and applying them as disease-specific biomarkers to obtain accurate, reproducible, and fast disease diagnosis could serve as an alternative to traditional invasive diagnosis methods. However, the success of VOC-based identification of diseases is limited to laboratory settings. Large-scale clinical data are warranted for establishing the robustness of disease diagnosis. Also, to identify specific VOCs associated with illness states, extensive clinical trials must be performed using both analytical instruments and electronic noses equipped with stable and precise sensors.

Investigation of Geraniol Biotransformation by Commercial Saccharomyces Yeast Strains by Two Headspace Techniques: Solid-Phase Microextraction Gas Chromatography/Mass Spectrometry (SPME-GC/MS) and Proton Transfer Reaction-Time of Flight-Mass Spectrometry (PTR-ToF-MS)

Hop-derived volatile organic compounds (VOCs) and their transformation products significantly impact beer flavour and aroma. Geraniol, a key monoterpene alcohol in hops, has been reported to undergo yeast-modulated biotransformation into various terpenoids during fermentation, which impacts the citrus and floral aromas of the finished beer. This study monitored the evolution of geraniol and its transformation products throughout fermentation to provide insight into differences as a function of yeast species and strain. The headspace concentration of VOCs produced during fermentation in model wort was measured using Solid-Phase Microextraction Gas Chromatography/Mass Spectrometry (SPME-GC/MS) and Proton Transfer Reaction-Time of Flight-Mass Spectrometry (PTR-ToF-MS). In the absence of yeast, only geraniol was detected, and no terpenoid compounds were detected in geraniol-free ferments. During fermentation, the depletion of geraniol was closely followed by the detection of citronellol, citronellyl acetate and geranyl acetate. The concentration of the products and formation behaviour was yeast strain dependent. SPME-GC/MS provided confidence in compound identification. PTR-ToF-MS allowed online monitoring of these transformation products, showing when formation differed between Saccharomyces cerevisiae and Saccharomyces pastorianus yeasts. A better understanding of the ability of different yeast to biotransform hop terpenes will help brewers predict, control, and optimize the aroma of the finished beer.

Co-cultivation of Mortierellaceae with Pseudomonas helmanticensis affects both their growth and volatilome

Volatile organic compounds (VOCs) might mediate microbial interactions, especially in spatially structured environments, such as soil. However, the variety and specificity of VOC production are poorly understood. Here, we studied 25 Mortierellaceae strains belonging to the genera Linnemannia and Entomortierella in both pure and co-culture with Pseudomonas helmanticensis under laboratory conditions. We analysed both the fungal growth depending on co-cultivation and the cultures' volatilomes applying proton-transfer-reaction time-of-flight and gas chromatography-mass spectrometry (PTR-ToF-MS and GC-MS). In a strain-specific manner, we found the fungi's radial growth rate and colony morphology affected by the presence of P. helmanticensis. The fungus seemed to generally reduce the bacterial growth. The volatilomes of the fungal and bacterial pure and co-cultures were diverse. While the fungi frequently consumed VOCs, P. helmanticensis produced a higher diversity and amount of VOCs than any fungal strain. Our results support that both the pure and co-culture volatilomes are taxonomically conserved. Taken together, our data supports the relevance of VOCs in Mortierellaceae-P. helmanticensis interaction. We also discuss individual VOCs that appear relevant in the interaction.

Ion-molecule reactions in the HBr+ + HCl (DCl) system: a combined experimental and theoretical study

Reactions in the system HBr⁺ + HCl (DCl) were investigated inside a guided ion-beam apparatus under single-collision conditions. In the HBr⁺ + HCl system, the proton transfer (PT_HCl) and charge transfer (CT) are observable. In the HBr⁺ + DCl system, proton transfer (PT_DCl) and deuterium abstraction (DA) are accessible. The cross sections for all reaction channels were measured as a function of the collision energy E_cm and of the rotational energy E_rot of the ion. The rotationally state-selective formation of the ionic species was realized by resonance-enhanced multiphoton ionization (REMPI). As expected, the PT-channels are exothermic, and the cross section decreases with increasing collision energy for both PT_HCl and PT_DCl. The cross section for DA also decreases with an increasing E_c.m.. In the case of a considerably endothermic CT-channel, the reaction efficiency increases with increasing collision energy but has an overall much smaller cross sections compared to PT and DA reactions. Both PT-reactions are hindered by ion rotation, whereas DA is independent of E_rot. The CT-channel shows a rotational enhancement near the thermochemical threshold. The experiment is complemented by theory, using ab initio molecular dynamics (AIMD, also known as direct dynamics) simulations and taking the rotational enhancement of HBr⁺ into account. The simulations show good agreement with the experimental results. The cross section of PT_HCl decreases with an increase of the rotational energy. Furthermore, the absolute cross sections are in the same order of magnitude. The CT channel shows no reactions in the simulation.

Nanoplastics and ultrafine microplastic in the Dutch Wadden Sea - The hidden plastics debris?

Plastic pollution in the marine environment has been identified as a global problem; different polymer types and fragment sizes have been detected across all marine regions, from sea ice to the equator and the surface to the deep sea. However, quantification of marine plastics debris in the size range of nanoplastics (<1 μm) and ultrafine microplastics (<10 μm) is not constrained, because such minuscule particles are challenging to measure. In this work, we applied a novel analytical assay using Thermal Desorption - Proton Transfer Reaction - Mass Spectrometry (TD-PTR-MS), which is suitable to detect and identify plastics in the nanogram range. From two stations in the Wadden Sea (the Netherlands), we measured nanoplastics directly from seawater aliquots, and from filters with different mesh sizes. Our results show the presence of Polystyrene (PS) and Polyethylene terephthalate (PET) nanopalstics as well as ultrafine microplastics in the Wadden Sea water column. The mass concentration of PS nanoplastics was 4.2 μg/L on average, indicating a substantial contribution of nanoplastics to the Wadden Sea's total plastic budget.

Volatile Organic Compound Fragmentation in the Afterglow of Pulsed Glow Discharge in Ambient Air

Glow discharge (GD) source gained an increased level of attention in relation to the analysis of volatile organic compounds (VOCs) since past work showed that this soft ionization method allowed direct analysis of VOCs with minimal fragmentation, however, the issue of fragmentation was not previously studied in detail. The aim of the present work was to investigate the effect of discharge conditions on VOC fragmentation in the system consisting of the cell with pulsed glow discharge and a time-of-flight mass spectrometer. Ionization of VOCs of different classes (hydrocarbons, alcohols, esters, and carboxylic acids) was investigated. A copper cathode with flat geometry was used. VOCs were ionized in the afterglow of short pulse glow discharge in the air. The use of discharge afterglow significantly reduces or eliminates the effects of ionization mechanisms other than Penning process, in particular, electron ionization. This significantly reduced VOC fragmentation and provided rather low limits of detection. Specific cluster formation was observed for alcohols and esters, which may facilitate their identification.

Increased Sensitivity in Proton Transfer Reaction Mass Spectrometry by Using a Novel Focusing Quadrupole Ion Funnel

Sensitivity enhancement in proton transfer reaction mass spectrometry (PTR-MS) is an important development direction. We developed a novel drift tube called a focusing quadrupole ion funnel (FQ-IF) for use in PTR-MS to improve the sensitivity. The FQ-IF consists of 20 layers of stainless steel electrodes, and each layer has 4 quarter rings. The first 6 layers have a constant inner hole diameter of 22 mm; the latter 14 layers taper the inner diameter down to 8 mm. The FQ-IF drift tube can also operate in the direct current (DC) mode (similar to a conventional drift tube) and ion funnel (IF) mode (similar to a conventional ion funnel drift tube) by changing the voltage loading method. The simulation results show that the transmission efficiency of the FQ-IF is significantly improved compared to that of the other two modes. Further experiments show that the product ions of limonene tend to convert into smaller m/z fragment ions at higher voltages for the DC and IF modes. However, unlike the DC and IF modes, the distribution of product ions is stable at higher voltages for the FQ-IF. In other words, a higher RF voltage for the FQ-IF will not increase the collision energy of ions. In addition, the improvements in sensitivity for the FQ-IF range from 13.8 to 87.9 times compared to the DC mode and from 1.7 to 4.8 times compared to the IF mode for the 12 test compounds. The improvements in the limit of detection (LOD) for the FQ-IF range from 2.7 to 35.7 times compared to the DC mode. The FQ-IF provides a valuable reference for improving the sensitivity of PTR-MS and other mass spectrometers.

Real-time air concentrations and turbulent fluxes of volatile organic compounds (VOCs) over historic closed landfills to assess their potential environmental impact

For the first time, emission/deposition fluxes of volatile organic compounds (VOCs) and H₂S from a historic closed landfill site in Southern Italy were determined by Eddy Covariance (EC) using Proton Transfer Reaction Time-of-Flight Mass Spectrometry (PTR-TOF-MS). This was done in two field campaigns of one week performed in July and October 2016, where fluxes of CO₂ and CH₄ were also measured. Many compounds not previously identified in the biogas were detected by PTR-TOF-MS, but only in July some of them produced positive fluxes exceeding the flux limit of detection. Methanol was the most emitted compound with an average flux of 44.20 ± 4.28 μg m^-2 h^-1, followed by toluene with a mean flux of 18.97 ± 2.47 μg m^-2 h^-1. Toluene fluxes were 10 times higher than those of benzene, fitting rather well with values previously measured in the biogas. VOCs emission fluxes of monoterpenes and highly reactive arenes did not reflect, however, the biogas composition. This, combined with tiny emissions of VOC oxidation products, suggests that landfill emissions underwent some photochemical degradation before being dispersed in the atmospheric boundary layer (ABL). Deposition fluxes of some VOCs emitted from the sea was also observed in July. No relevant VOC fluxes were instead measured in October, suggesting that temperature was the variable controlling most landfill emission. Albeit small, summer landfill emissions from the investigated site can have an impact on the population living nearby, because they contain or still generate compounds that causing nuisance.

Traffic, transport, and vegetation drive VOC concentrations in a major urban area in Texas

The population of Texas has increased rapidly in the past decade. The San Antonio Field Study (SAFS) was designed to investigate ozone (O₃) production and precursors in this rapidly changing, sprawling metropolitan area. There are still many questions regarding the sources and chemistry of volatile organic compounds (VOCs) in urban areas like San Antonio which are affected by a complex mixture of industry, traffic, biogenic sources and transported pollutants. The goal of the SAFS campaign in May 2017 was to measure inorganic trace gases, VOCs, methane (CH₄), and ethane (C₂H₆). The SAFS field design included two sites to better assess air quality across the metro area: an urban site (Traveler's World; TW) and a downwind/suburban site (University of Texas at San Antonio; UTSA). The results indicated that acetone (2.52 ± 1.17 and 2.39 ± 1.27 ppbv), acetaldehyde (1.45 ± 1.02 and 0.93 ± 0.45 ppbv) and isoprene (0.64 ± 0.49 and 1.21 ± 0.85 ppbv; TW and UTSA, respectively) were the VOCs with the highest concentrations. Additionally, positive matrix factorization showed three dominant factors of VOC emissions: biogenic, aged urban mixed source, and acetone. Methyl vinyl ketone and methacrolein (MVK + MACR) exhibited contributions from both secondary photooxidation of isoprene and direct emissions from traffic. The C₂H₆:CH₄ demonstrated potential influence of oil and gas activities in San Antonio. Moreover, the high O₃ days during the campaign were in the NO_x-limited O₃ formation regime and were preceded by evening peaks in select VOCs, NO_x and CO. Overall, quantification of the concentration and trends of VOCs and trace gases in a major city in Texas offers vital information for general air quality management and supports strategies for reducing O₃ pollution. The SAFS campaign VOC results will also add to the growing body of literature on urban sources and concentrations of VOCs in major urban areas.

Peroxy Radical and Product Formation in the Gas-Phase Ozonolysis of α-Pinene under Near-Atmospheric Conditions: Occurrence of an Additional Series of Peroxy Radicals O,O-C10H15O(O2)yO2 with y = 1-3

Ozonolysis of α-pinene, C₁₀H₁₆, and other monoterpenes is considered to be one of the important chemical process in the atmosphere leading to condensable vapors, which are relevant to aerosol formation and, finally, for Earth's radiation budget. The formation of peroxy (RO₂) radicals, O,O-C₁₀H₁₅(O₂)_xO₂ with x = 0-3, and closed-shell products has been probed from the ozonolysis of α-pinene for close to atmospheric reaction conditions. (The "O,O" in the chemical formulas indicates the two carbonyl groups formed in the ozonolysis.) An additional series of RO₂ radicals, O,O-C₁₀H₁₅O(O₂)_yO₂ with y = 1-3, emerged in the presence of NO additions of (1.7-50) × 10⁹ molecules cm^-3, whose formation can be explained via different processes starting from alkoxy (RO) radicals, such as the RO-driven autoxidation. The main closed-shell product is a substance with the composition C₁₀H₁₆O₃, probably pinonic acid, obtained with a molar yield (lower limit) of 0.26+0.27-0.14 independent of NO. Total molar product yields accounted for up to 0.71+0.72-0.38 indicating reasonable detection sensitivity of the analytical technique applied. For the isomeric O,O-C₁₀H₁₅O₂ radicals, an average rate coefficient k(RO₂ + NO) = (1.5 ± 0.3) × 10^-11 cm³ molecule^-1 s^-1 at 295 ± 2 K was determined. Product analysis showed a lowering in the formation of highly oxygenated organic molecules (HOMs) by a factor of ∼2.2 when adding 5 × 10¹⁰ molecules cm^-3 of NO. The comparison with former results revealed that total HOM suppression by NO in the α-pinene ozonolysis is slightly stronger than in the OH + α-pinene reaction.

Watching Paint Dry: Organic Vapor Emissions from Architectural Coatings and their Impact on Secondary Organic Aerosol Formation

Emissions from volatile chemical products (VCPs) are emerging as a major source of anthropogenic secondary organic aerosol (SOA) precursors. Paints and coatings are an important class of VCPs that emit both volatile and intermediate volatility organic compounds (VOCs and IVOCs). In this study, we directly measured I/VOC emissions from representative water- (latex) and oil-based paints used in the U.S. Paint I/VOC emissions vary by several orders of magnitude by both the solvent and gloss level. Oil-based paints had the highest emissions (>10⁵ μg/g-paint), whereas low-gloss interior paints (Flat, Satin, and Semigloss) all emitted ∼10² μg/g-paint. Emissions from interior paints are dominated by VOCs, whereas exterior-use paints emitted a larger fraction of IVOCs. Extended emission tests showed that most I/VOC emissions occur within 12-24 h after paint application, though some paints continue to emit IVOCs for 48 h or more. We used our data to estimate paint I/VOC emissions and the subsequent SOA production in the U.S. Total annual paint I/VOC emissions are 48-155 Gg (0.15-0.48 kg/person). These emissions contribute to the formation of 2.2-7.5 Gg of SOA annually. Oil-based paints contribute 70-98% of I/VOC emissions and 61-99% of SOA formation, even though they only account for a minority of paint usage.

A Family of 2D-MXenes: Synthesis, Properties, and Gas Sensing Applications

Gas sensors, capable of detecting and monitoring trace amounts of gas molecules or volatile organic compounds (VOCs), are in great demand for numerous applications including diagnosing diseases through breath analysis, environmental and personal safety, food and agriculture, and other fields. The continuous emergence of new materials is one of the driving forces for the development of gas sensors. Recently, 2D materials have been gaining huge attention for gas sensing applications, owing to their superior electrical, optical, and mechanical characteristics. Especially for 2D MXenes, high specific area and their rich surface functionalities with tunable electronic structure make them compelling for sensing applications. This Review discusses the latest advancements in the 2D MXenes for gas sensing applications. It starts by briefly explaining the family of MXenes, their synthesis methods, and delamination procedures. Subsequently, it outlines the properties of MXenes. Then it describes the theoretical and experimental aspects of the MXenes-based gas sensors. Discussion is also extended to the relation between sensing performance and the structure, electronic properties, and surface chemistry. Moreover, it highlights the promising potential of these materials in the current gas sensing applications and finally it concludes with the limitations, challenges, and future prospects of 2D MXenes in gas sensing applications.