Enhanced pharmaceutical analysis by CE using dynamic surface coating system

Capillary Electrophoresis Method for Determination of Escitalopram Oxalate in Urine Samples and Different Dosage Forms

Application of capillary electrophoresis (CE) has become a rapidly growing analytical technique for the estimation of drugs in pharmaceutical dosage forms and biological fluids. In this study, an effective and sensitive method was developed for the determination of escitalopram oxalate (ESC-OX) by CE with diode-array detection at 200 nm. The separation was achieved by a fused silica capillary with 40 cm effective length (48.5 cm total, 75 μm i.d.). The background electrolyte was composed of 15 mM phosphate buffer (pH 2.5). The applied potential was 22.5 kV, and the samples were injected at 50 mbar pressure for 10 s. Metoprolol was used as an internal standard (IS). The migration time under these optimum conditions was 6.51 ± 0.07 and 6.73 ± 0.08 min for ESC-OX and IS, respectively, with total run time 7 min. The method was validated for linearity, precision, accuracy, specificity and sensitivity. The limit of detection was calculated as 3.85 and 5.07 ng mL−1 for standard and urine samples, respectively. The developed method was employed successfully for the determination of ESC-OX in different pharmaceutical dosage forms and spiked human urine after simple liquid–liquid extraction with good recovery.

Analysis of doxorubicin distribution in MCF-7 cells treated with drug-loaded nanoparticles by combination of two fluorescence-based techniques, confocal spectral imaging and capillary electrophoresis

The intracellular distribution of the antiancer drug doxorubicin (DOX) was followed qualitatively by fluorescence confocal spectral imaging (FCSI) and quantitatively by capillary electrophoresis (CE). FCSI permits the localization of the major fluorescent species in cell compartments, with spectral shifts indicating the polarity of the respective environment. However, distinction between drug and metabolites by FCSI is difficult due to their similar fluorochromes, and direct quantification of their fluorescence is complicated by quantum yield variation between different subcellular environments. On the other hand, capillary electrophoresis with fluorescence detection (CE-LIF) is a quantitative method capable of separating doxorubicin and its metabolites. In this paper, we propose a method for determining drug and metabolite concentration in enriched nuclear and cytosolic fractions of cancer cells by CE-LIF, and we compare these data with those of FCSI. Significant differences in the subcellular distribution of DOX are observed between the drug administered as a molecular solution or as a suspension of drug-loaded iron oxide nanoparticles coated with polyethylene glycol. Comparative analysis of the CE-LIF vs FCSI data may lead to a tentative calibration of this latter method in terms of DOX fluorescence quantum yields in the nucleus and more or less polar regions of the cytosol.

Dynamic coating capillary electrophoresis for separation of humic acid using mixture solution of non-ionic polymers both as coating agent and separation medium

A simple, rapid, and precise dynamic coating capillary electrophoretic separation method for water-soluble humic substances is proposed. An aqueous solution containing hydroxyethyl cellulose (HEC), polyethylene glycol (PEG), and pH buffer component was employed for both the dynamic coating agent and the separation medium. The procedure for the coating of the capillary inner wall was simply filling the buffered polymer mixture solution into the capillary that had been treated with 1 M aqueous HCl solution. The solution for the capillary coating was directly used as the electrophoretic buffer solution for CE separation. Excellent performance for the separation of humic acid was obtained using the solution containing 0.5% (w/v) HEC, 1.0% (w/v) PEG 10000, and 0.1% (w/v) PEG 8000000. Excellent reproducibility and durability were obtained even at slightly alkaline conditions at pH levels above 8. The separation of 0.1 - 2 kbp of DNA ladder by the proposed method showed was also achieved.

Principles of micellar electrokinetic capillary chromatography applied in pharmaceutical analysis

Since its introduction capillary electrophoresis has shown great potential in areas where electrophoretic techniques have rarely been used before, including here the analysis of pharmaceutical substances. The large majority of pharmaceutical substances are neutral from electrophoretic point of view, consequently separations by the classic capillary zone electrophoresis; where separation is based on the differences between the own electrophoretic mobilities of the analytes; are hard to achieve. Micellar electrokinetic capillary chromatography, a hybrid method that combines chromatographic and electrophoretic separation principles, extends the applicability of capillary electrophoretic methods to neutral analytes. In micellar electrokinetic capillary chromatography, surfactants are added to the buffer solution in concentration above their critical micellar concentrations, consequently micelles are formed; micelles that undergo electrophoretic migration like any other charged particle. The separation is based on the differential partitioning of an analyte between the two-phase system: the mobile aqueous phase and micellar pseudostationary phase. The present paper aims to summarize the basic aspects regarding separation principles and practical applications of micellar electrokinetic capillary chromatography, with particular attention to those relevant in pharmaceutical analysis.

Capillary electrophoresis for pharmaceutical analysis

This chapter describes the application of capillary electrophoresis (CE) to pharmaceutical analysis. The areas of pharmaceutical analysis covered are enantiomer separation, analysis of small molecules such as amino acids or drug counter-ions, pharmaceutical assay, related substances determinations, and physiochemical measurements such as log P and pKa of compounds. The different electrophoretic modes available and their advantages for pharmaceutical analysis are described. Recent applications of CE for each subject area are tabulated with electrolyte details. Information on electrolyte choice and method optimization to obtain optimal separations is included.

A rapid CZE method for the analysis of benzodiazepines in spiked beverages

A rapid CZE method was developed for the simultaneous determination of nine benzodiazepines in spiked beverages (nitrazepam oxazepam, alprazolam, flunitrazepam, temazepam, diazepam, 7-aminoflunitrazepam, 7-aminonitrazepam and 7-aminoclonazepam). The method employed a double-coated capillary coated with poly(diallyldimethylammonium chloride) and then dextran sulphate. The BGE conditions were 100 mM ammonium phosphate buffer, pH 2.5, which gave baseline resolution between consecutive peaks and a run time of less than 6.5 min. This method offers improvements in both resolution and run time, compared to those attained under analogous conditions with an uncoated capillary. The validated method was successfully applied to beverages that had been spiked with benzodiazepines at concentrations simulating prescription tablets. No sample pretreatment was required to quantify five benzodiazepines in Coca-Cola, orange juice, beer, bourbon and Bacardi. The exception was white wine, where the complex sample matrix did not enable the accurate quantification of nitrazepam.

A fast CE method for the achiral separation of methadone and its major metabolites, 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine and 2-ethyl-5-methyl-3,3-diphenyl-1-pyrroline

The utilization of dynamic doubly coated capillaries for a fast separation of methadone and its two major metabolites, 2-ethylidene-1,5-dimethyl-3,3-diphenylpyrrolidine (EDDP) and 2-ethyl-5-methyl-3,3-diphenyl-1-pyrroline (EMDP) was investigated. The coated capillaries were prepared using a polycation of poly(diallyldimethylammonium chloride) and a polyanion of dextran sulfate. A fast achiral separation was developed using the coated capillaries with a BGE of 100 mM phosphate buffer at pH 2.6. Complete achiral separation of methadone, EDDP and EMDP was achieved, with migration times of approximately 4 min. The method offers considerable advantages with respect to BGE simplicity and analysis time compared to previously published CE methods for methadone and its related analytes.

Simultaneous enantioseparation of antiparkinsonian medication Rotigotine and related chiral impurities by capillary zone electrophoresis using dual cyclodextrin system

A dual cyclodextrin (CD) system consisting of sulfated beta-CD (S-beta-CD) and methyl-beta-CD (M-beta-CD) modified capillary zone electrophoresis (CZE) method was proposed to separate the antiparkinsonian drug Rotigotine ((-)-(S)-2-(N-propyl-N-2-thienylethylamino)-5-hydroxytetralin) and related chiral impurities (2-(N-propylamino)-5-hydroxytetralin, 2-(N-propylamino)-5-methoxytetralin). The method was optimized by varying the CD type, the buffer pH, individual CD concentration of the dual system and the ionic strength of background electrolyte. Under the optimum conditions, i.e. 2% (w/v) S-beta-CD and 2% (w/v) M-beta-CD in 100mM sodium phosphate (pH 2.5) as the running buffer, separation voltage -20 kV, detected at 200 nm and temperature controlled at 20 degrees C, a satisfactory separation of the six analytes was accomplished. The optimized method was validated for specificity, precision, linearity, accuracy and stability using sodium benzenesulfonate as the internal standard. The relative standard deviation for migration time was less than 0.58%, and 3.78% for peak area ratio. The linearity ranged from 0.005 to 0.25 mM. The recovery ranged from 95.9% to 108.3%. The limits of detection and limits of quantification for each enantiomer were 0.003 and 0.01 mM, respectively. This method was utilized for evaluating the chiral purity of five batches of Rotigotine.

Capillary electrophoresis–mass spectrometry of proteins at medium pH using bilayer-coated capillaries

The feasibility of using noncovalently bilayer-coated capillaries for capillary electrophoresis-mass spectrometry (CE-MS) of acidic proteins was investigated using background electrolytes (BGEs) of medium pH. The capillary was coated by successively rinsing the capillary with solutions of the oppositely charged polymers polybrene (PB) and poly(vinyl sulfonic acid) (PVS). Volatile BGEs containing ammonium formate and/or N-methyl morpholine were tested at pH 7.5 and 8.5. Overall, these BGEs provided relatively fast protein separations (analysis times of ca. 12 min) and showed high efficiencies (70,000-300,000 plates) when the ionic strength was sufficiently high. Migration-time reproducibilities were very favorable with RSDs of less than 1.0%. Infusion experiments showed satisfactory MS responses for studied proteins dissolved in ammonium formate (pH 8.5), however, high concentrations of N-methyl morpholine appeared to seriously suppress the MS protein signals. Evaluation of the CE-MS system was performed by analyzing a mixture of intact proteins yielding efficient separations and good-quality mass spectra. CE-MS analysis of a reconstituted formulation of the biopharmaceutical recombinant human growth hormone (rhGH) which was stored for a prolonged time, revealed one degradation product which was provisionally identified as desamido rhGH. Based on the MS responses the amount of degradation was estimated to be ca. 25%.

ITP in dynamically double-coated fused-silica capillaries

Bidirectional ITP in fused-silica capillaries double-coated with Polybrene and poly-(vinylsulfonate) is a robust approach for analysis of low-molecular-mass compounds. EOF towards the cathode is strong (mobility >4.0 x 10(-8) m(2)/Vs) within the entire pH range investigated (2.40-8.08), dependent on ionic strength and buffer used and, at constant ionic strength, higher at alkaline pH. Electrokinetic separations and transport in such coated capillaries can be described with a dynamic computer model which permits the combined simulation of electrophoresis and electroosmosis in which the EOF is predicted either with a constant (i.e. pH- and ionic strength-independent) or a pH- and ionic strength-dependent electroosmotic mobility. Detector profiles predicted by computer simulation agree qualitatively well with bidirectional isotachopherograms that are monitored with a setup comprising two axial contactless conductivity detectors and a UV absorbance detector. The varying EOF predicted with a pH- and ionic strength-dependent electroosmotic mobility can be regarded as being realistic.

Efficient and highly reproducible capillary electrophoresis-mass spectrometry of peptides using Polybrene-poly(vinyl sulfonate)-coated capillaries

The potential of capillaries noncovalently coated with a bilayer of oppositely charged polymers for the analysis of peptides by CE-MS was investigated. Bilayer coatings were produced by subsequently rinsing fused-silica capillaries with a solution of Polybrene (PB) and poly(vinyl sulfonate) (PVS). The PB-PVS coating showed to be fully compatible with MS detection causing no ionization suppression or background signals. The bilayer coating provided a considerable EOF at low pH, thereby facilitating the fast separation of peptides using a BGE of formic acid (pH 2.5). Under optimized CE-MS conditions, for enkephalin peptides high separation efficiencies were obtained with plate numbers in the range of 300,000-500,000. It is demonstrated that both the cancellation of the hydrodynamic capillary flow induced by the nebulizer gas and a sufficiently high-data acquisition rate are crucial for achieving these efficiencies. The overall performance of the CE-MS system using PB-PVS-coated capillaries was evaluated by the analysis of a tryptic digest of cytochrome c. The system provided an efficient separation of the peptide mixture, which could be effectively monitored by MS/MS detection allowing identification of at least 13 peptides within a time interval of 1.5 min. In addition, the PB-PVS coating proved to be very consistent yielding stable CE-MS patterns with highly favorable migration time reproducibilities (RSDs < 1% over a 3-day period).

Capillary electrophoresis for the analysis of small-molecule pharmaceuticals

This paper reviews the application of CE to the analysis of small-molecule pharmaceuticals. The areas of pharmaceutical analysis covered are enantiomer separation, the analysis of small molecules such as amino acids or drug counter-ions, pharmaceutical assay, determination of related substances and physicochemical measurements such as log P and pK(a) of compounds. The different electrophoretic modes available and their advantages for pharmaceutical analysis are described. Recent applications of CE for each subject area are tabulated with electrolyte details.

Strategies for rapid chiral analysis by capillary electrophoresis

The aim of this study was to investigate four strategies to decrease chiral CE analysis time: (1) short-end injection technique, (2) high electric field through a capillary length reduction, (3) external pressure application and (4) capillary dynamically coated to generate an important electroosmotic flow. These approaches were applied for a simultaneous enantiomeric separation of amphetamine and four related compounds using a neutral derivatised cyclodextrin (hydroxypropyl-beta-cyclodextrin) as chiral selector. Analysis time and CE performances, in terms of peak efficiency and resolution, were examined. Among the investigated strategies, the dynamic coating procedure appeared to be the most suitable approach to decrease analysis time (inferior to 7 min) and improve sensitivity. Furthermore, it exhibited very good migration time repeatability (0.1%). This benefit is of utmost interest in chiral analysis for an unambiguous peak identification, especially for a complex mixture such as reported in this study.

Rapid stereoselective separations of amphetamine derivatives with highly sulfated γ-cyclodextrin

The highly sulfated gamma-CD (HS-gamma-CD) is a chiral selector widely used in CE for the enantioseparation of pharmaceutical compounds. This paper investigated different approaches to reduce the stereoselective analysis time of amphetamine (AT) derivatives according to the chiral selector concentration in the BGE. With high HS-gamma-CD concentration, tested analytes were separated in 3.5 min as anionic complexes with short-end injection technique in reversed polarity mode. However, this procedure presented some limitations in terms of efficiency and resolution, excessive Joule heating and poor compatibility with MS detection. With low HS-gamma-CD concentration, compounds were separated as cations. Conventional approaches to reduce CE analysis time demonstrated critical resolution between some analytes. Therefore, the use of the partial-filling technique compatible with MS detection was carried out. Under optimized conditions, the analysis time for the chiral separation of seven AT like compounds was reduced to 6 min. Moreover, sensitivity of CE-MS was sufficient for the determination of ATs in plasma following a simple liquid-liquid extraction.

Noncovalently bilayer-coated capillaries for efficient and reproducible analysis of proteins by capillary electrophoresis

The suitability of noncovalently bilayer-coated capillaries for the analysis of proteins by capillary electrophoresis (CE) at medium pH was investigated. Fused-silica capillaries were coated simply by successively flushing with a polybrene (PB) and a poly(vinyl sulfonate) (PVS) solution. A protein test mixture was used to evaluate the performance of the coated capillaries. Comparisons with bare fused-silica capillaries were made. Several background electrolytes (BGEs) were tested in combination with the PB-PVS coating, showing that optimum performance was obtained for the proteins using high BGE concentrations. With a 300 mM Tris phosphate buffer (pH 7.0), good plate numbers (150,000-300,000), symmetrical peaks, and favorable migration-time repeatabilities (RSDs below 0.8%) were obtained for the proteins. Using bare fused-silica capillaries, the protein peaks were significantly broadened and the migration-time RSDs often exceeded 5%. It is concluded that the PB-PVS coating effectively minimizes adverse protein adsorption and provides a very stable electroosmotic flow (EOF). We also investigated the potential of a commercially available bilayer coating (CEofix) for protein analysis. It is demonstrated that with this coating, good plate numbers and peak symmetries for proteins can be achieved when the CEofix BGE ("accelerator") is replaced by a common BGE such as sodium or Tris phosphate. Apparently, the negatively charged polymer present in the "accelerator" interacts with the proteins causing band broadening. The utility of the bilayer coatings is further illustrated by the separation of proteins such as interferon-alpha 2b, myoglobin and carbonic anhydrase, by the analysis of a degraded insulin sample in time, and by the profiling of the glycoprotein ovalbumin. In addition, it is demonstrated that even in the presence of concentrations of human serum albumin in the sample of up to 60 mg/mL, the PB-PVS coating still provides reproducible protein separations of good performance.

Decreasing analysis time in capillary electrophoresis: Validation and comparison of quantitative performances in several approaches

Capillary electrophoresis (CE) can be used for the rapid determination of pharmaceuticals, particularly in routine quality control analysis. This paper focuses on several approaches aimed at decreasing the analysis time with commercially available instrumentation by (i) application of a high electric field through a reduced capillary, (ii) use of a dynamically coated capillary to increase the electroosmotic flow, (iii) short-end injection (SEI) technique, and (iv) application of multiple sample injections. Moreover, SEIs were combined with the three other approaches. A pharmaceutical formulation containing lidocaine as an active component was selected, and the methods were validated according to the ICH guidelines. The seven approaches investigated fulfilled different statistical requirements and demonstrated their linearity and trueness, with good recoveries and confidence limits always inferior to 1.5%. Furthermore, relative standard deviation (RSD) values for repeatability and intermediate precision were inferior to 1.1 and 1.8%, respectively. These results confirmed that each approach is of utmost interest to increase the analyte throughput in CE.

Dynamically coated capillaries for enantioselective separations by capillary electrophoresis

The level of variability in migration times and peak areas often encountered in capillary electrophoresis (CE) has restricted its use for routine analysis. Cationic analytes also tend to interact with the capillary wall, resulting in skewed peak shapes and reduced efficiency. We investigated a dynamic coating procedure that involves a two-step process to modify the capillary and that results in a higher but stable electro-osmotic flow (EOF) at low pH. We compared enantioselective separations of several basic compounds on unmodified and dynamically coated capillaries. A derivatized cyclodextrin was used as the chiral additive. When the dynamic coating was used, peak symmetry improved, and migration times were significantly shorter. The dynamic coating procedure also resulted in improved migration time and peak area precision.

A novel double coating for microemulsion electrokinetic chromatography with laser-induced fluorescence detection: as tested with amino acid derivatives

A novel double coating (DC) was developed for fast and reproducible microemulsion electrokinetic chromatography (MEEKC), as tested with separation and determination of amino acids using laser-induced fluorescence (LIF) detection after derivatization with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazol. The simple coating is a combination of a removable covalent layer and a dynamic SDS coating. Hexamethyldisilazane was utilized for the covalent layer that can be regenerated on-line. Compared with previous no-coating method, the analysis time was shortened; and the reproducibility of migration times was improved.

Micellar electrokinetic chromatography with laser-induced fluorescence detection for rapid and sensitive analysis of two new bioactive reagents using dynamic covalent coating

A simple, rapid, selective, and sensitive micellar electrokinetic chromatography (MEKC) with laser-induced fluorescence detection (LIF) method was developed, using hexamethyldisilazane (HMDS) as dynamic covalent coating (DCC), for the analysis of two new bioactive agents N-n-hexyl-N'-(sodium p-aminobenzenesulfonate) thiourea (HXPT) and N-n-undecyl-N'-(sodium p-aminobenzenesulfonate) thiourea (UPT) derivatized with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole. MEKC methods both not using DCC and using DCC were investigated. In a series of optimization steps, DCC and a running buffer of 20 mM Na2B4O7 + 16 mM SDS + 8% acetonitrile were applied for determination of the derivatives. Linear relationships for HXPT and UPT were obtained in the range of 5 to 100 microM (correlation coefficient: 0.9986 for HXPT, 0.9978 for UPT), and the detection limits for HXPT and UPT were 16.5 and 39.0 ng mL(-1). The sensitivity was improved over that of fluorescence spectroscopy methods. The method was applied to the analysis of the two reagents in lab water waste with recoveries in the range of 95.6-107.5%.

Use of dynamically coated capillaries for the determination of heroin, basic impurities and adulterants with capillary electrophoresis

Rapid, precise, accurate, and reproducible methodology using capillary electrophoresis (CE) with dynamically coated capillaries for the analysis of heroin and its basic impurities and adulterants is presented. Highly selective determination of the above solutes is obtained by analyzing the same sample preparation by two CE methods. For the determination of heroin, its basic impurities and basic adulterants, dynamic coating of the capillary surface is accomplished using a commercially available reagent kit with an added cyclodextrin ((CD) polycation coating followed by polyanion coating with dimethyl-beta-cyclodextrin or hydroxypropyl-beta-cyclodextrin). The addition of a cyclodextrin to the run buffer significantly improves the separation of these solutes. Neutral, acidic, and weakly basic adulterants which migrate near or after t0 do not interfere with the more mobile basic solutes. The determination of neutral, acidic, and weakly basic adulterants in heroin is accomplished using a modification of the above commercially available reagent kit. After first coating with a polycation, a negative coating is obtained using a surfactant sodium dodecyl sulfate. Micellar electrokinetic chromatography (MEKC) with dynamically coated capillaries gives an excellent separation of the neutral, acidic, and weakly basic solutes, with considerably shorter run times compared to conventional MEKC. In addition for this system, most basic solutes in heroin have longer migration times than the uncharged and acidic compounds.

Overview of the status and applications of capillary electrophoresis to the analysis of small molecules

The status of capillary electrophoresis (CE) in the analysis of small molecules is reviewed and summarised with the illustrative use of recent literature references. Examples are cited in this review which demonstrate that CE is now a recognised and established technique in many industries, law courts and government regulatory agencies. Each of the principal areas of CE application in small molecule analysis are covered in sections which highlight the recent developments and possibilities within that area. Application areas include the analysis of pharmaceuticals, agrochemicals, chiral separations, and forensics is covered. This is an update to a previous review article [J. Chromatogr. A 856 (1999) 443] and covers papers published between 1999 and 2002. Technical developments and improvements, such as the advent of capillary array instrumentation for increased sample throughput, and improved detection options are described. Overall it is concluded that CE has become a recognised and established technique in many areas and is still within a period of development of both instrumentation and application which will continue to expand usage.