Glycosaminoglycan synthesis in the rat articular disk in response to mechanical stress

Influence of feeding a soft diet on proteoglycan expression in rat temporomandibular joint discs

OBJECTIVES

Extracellular matrix components play a significant role in maintaining tissue integrity and pathological processes of the temporomandibular joint (TMJ). This study aimed to evaluate the influence of a soft diet on the mRNA expression of proteoglycans and glycosaminoglycans (GAGs) linked to proteoglycan core proteins in rat TMJ discs.

METHODS

Thirty 4-week-old male Wistar rats were assigned to one of two groups: a control group fed a regular pellet diet and a soft diet group fed a powdered diet for 4 weeks. The mRNA expression levels of 12 proteoglycans in TMJ discs were evaluated using real-time polymerase chain reaction (PCR). In addition, histomorphometric and biochemical analyses were performed to evaluate the thickness and deoxyribonucleic acid (DNA), GAG, and water content of the TMJ discs.

RESULTS

The TMJ disc thickness in the anterior, intermediate, and posterior bands decreased significantly in the soft diet group. The GAG content decreased significantly in the soft-diet group, whereas no significant differences in DNA content or water content ratio were observed between the groups. Real-time PCR indicated that the expression levels of aggrecan, versican, biglycan, decorin, fibromodulin, lumican, and chondroadherin decreased in the soft diet group. The expression levels of all versican isoforms decreased in the soft diet group.

CONCLUSIONS

These results indicate that the biomechanical environment of the TMJ caused by a soft diet is closely related to the expression of proteoglycans in TMJ discs, which may eventually increase the fragility of the TMJ discs.

Critical signaling molecules in the temporomandibular joint osteoarthritis under different magnitudes of mechanical stimulation

The mechanical stress environment in the temporomandibular joint (TMJ) is constantly changing due to daily mandibular movements. Therefore, TMJ tissues, such as condylar cartilage, the synovial membrane and discs, are influenced by different magnitudes of mechanical stimulation. Moderate mechanical stimulation is beneficial for maintaining homeostasis, whereas abnormal mechanical stimulation leads to degeneration and ultimately contributes to the development of temporomandibular joint osteoarthritis (TMJOA), which involves changes in critical signaling molecules. Under abnormal mechanical stimulation, compensatory molecules may prevent degenerative changes while decompensatory molecules aggravate. In this review, we summarize the critical signaling molecules that are stimulated by moderate or abnormal mechanical loading in TMJ tissues, mainly in condylar cartilage. Furthermore, we classify abnormal mechanical stimulation-induced molecules into compensatory or decompensatory molecules. Our aim is to understand the pathophysiological mechanism of TMJ dysfunction more deeply in the ever-changing mechanical environment, and then provide new ideas for discovering effective diagnostic and therapeutic targets in TMJOA.

Dietary variation and mechanical properties of articular cartilage in the temporomandibular joint: implications for the role of plasticity in mechanobiology and pathobiology

Due to their nature as tissue composites, skeletal joints pose an additional challenge in terms of evaluating the functional significance of morphological variation in their bony and cartilaginous components in response to altered loading conditions. Arguably, this complexity requires more direct means of investigating joint plasticity and performance than typically employed to analyze macro- and micro-anatomical phenomena. To address a significant gap in our understanding of the plasticity of the mammalian temporomandibular joint (TMJ), we investigated the histology and mechanical properties of condylar articular cartilage in rabbits subjected to long-term variation in diet-induced masticatory stresses, specifically cyclical loading. Three cohorts of male weanlings were raised for six months on different diets until adulthood. Following euthanasia, the TMJ condyles on one side were dissected away, fixed, decalcified, dehydrated, embedded and sectioned. Safranin O staining was employed to identify variation in proteoglycan content, which in turn was used to predict patterns of articular cartilage stiffness in contralateral condylar specimens for each treatment group. Hematoxylin and eosin staining was used to quantify diet-induced changes in chondrocyte hypertrophy and cellularity. Mechanical tests document significant decreases in articular cartilage stiffness corresponding to patterns of extracellular matrix relative protein abundance in rabbits subjected to greater cyclical loading. This indicates that TMJs routinely subjected to higher masticatory stresses due to a challenging diet eventually develop postnatal decreases in the ability to counter compressive loads during postcanine biting and chewing. These findings provide novel information regarding TMJ performance, with broader implications about the costs and benefits of phenotypic plasticity as well as implications for how such biological processes affect connective tissue mechanobiology and pathobiology.

Effect of mechanical loading on the metabolic activity of cells in the temporomandibular joint: a systematic review

OBJECTIVES

The purpose of this systematic review was to elucidate how different modalities and intensities of mechanical loading affect the metabolic activity of cells within the fibro-cartilage of the temporomandibular joint (TMJ).

MATERIALS AND METHODS

A systematic review was conducted according to PRISMA guidelines using PubMed, Embase, and Web of Science databases. The articles were selected following a priori formulated inclusion criteria (viz., in vivo and in vitro studies, mechanical loading experiments on TMJ, and the response of the TMJ). A total of 254 records were identified. After removal of duplicates, 234 records were screened by assessing eligibility criteria for inclusion. Forty-nine articles were selected for full-text assessment. Of those, 23 were excluded because they presented high risk of bias or were reviews. Twenty-six experimental studies were included in this systematic review: 15 in vivo studies and 11 in vitro ones.

CONCLUSION

The studies showed that dynamic mechanical loading is an important stimulus for mandibular growth and for the homeostasis of TMJ cartilage. When this loading is applied at a low intensity, it prevents breakdown of inflamed cartilage. Yet, frequent overloading at excessive levels induces accelerated cell death and an increased cartilage degradation.

CLINICAL SIGNIFICANCE

Knowledge about the way temporomandibular joint (TMJ) fibrocartilage responds to different types and intensities of mechanical loading is important to improve existing treatment protocols of degenerative joint disease of the TMJ, and also to better understand the regenerative pathway of this particular type of cartilage.

The Effect of Altered Loading on Mandibular Condylar Cartilage

OBJECTIVE

The purpose of this study was to delineate the cellular, mechanical and morphometric effects of altered loading on the mandibular condylar cartilage (MCC) and subchondral bone. We hypothesized that altered loading will induce differentiation of cells by accelerating the lineage progression of the MCC.

MATERIALS AND METHODS

Four-week-old male Dkk3 XCol2A1XCol10A1 mice were randomly divided into two groups: (1) Loaded-Altered loading of MCC was induced by forced mouth opening using a custom-made spring; (2) Control-served as an unloaded group. Mice were euthanized and flow cytometery based cell analysis, micro-CT, gene expression analysis, histology and morphometric measurements were done to assess the response.

RESULTS

Our flow cytometery data showed that altered loading resulted in a significant increase in a number of Col2a1-positive (blue) and Col10a1-positive (red) expressing cells. The gene expression analysis showed significant increase in expression of BMP2, Col10a1 and Sox 9 in the altered loading group. There was a significant increase in the bone volume fraction and trabecular thickness, but a decrease in the trabecular spacing of the subchondral bone with the altered loading. Morphometric measurements revealed increased mandibular length, increased condylar length and increased cartilage width with altered loading. Our histology showed increased mineralization/calcification of the MCC with 5 days of loading. An unexpected observation was an increase in expression of tartrate resistant acid phosphatase activity in the fibrocartilaginous region with loading.

CONCLUSION

Altered loading leads to mineralization of fibrocartilage and drives the lineage towards differentiation/maturation.

Impact of mechanical stretch on the cell behaviors of bone and surrounding tissues

Mechanical loading is recognized to play an important role in regulating the behaviors of cells in bone and surrounding tissues in vivo. Many in vitro studies have been conducted to determine the effects of mechanical loading on individual cell types of the tissues. In this review, we focus specifically on the use of the Flexercell system as a tool for studying cellular responses to mechanical stretch. We assess the literature describing the impact of mechanical stretch on different cell types from bone, muscle, tendon, ligament, and cartilage, describing individual cell phenotype responses. In addition, we review evidence regarding the mechanotransduction pathways that are activated to potentiate these phenotype responses in different cell populations.

Chondroprotective potential of Phyllanthus amarus Schum. & Thonn. in experimentally induced cartilage degradation in the explants culture model

Phyllanthus amarus Schum. & Thonn. (P. amarus) has been reported to exhibit anti-inflammation and antiarthritis properties leading to our interest to examine its beneficial effect in osteoarthritis. Thus, this study aimed to explore the chondroprotective potential of P. amarus extract (PAE) and its major compounds, phyllanthin and hypophyllanthin, in a cartilage explant model. Various concentrations of P. amarus extract, phyllanthin and hypophyllanthin, were treated on porcine articular cartilage explants induced with 25 ng/ml of interleukin-1 beta (IL-1β). After 4 days of incubation, the culture medium was measured for the release of sulfate glycosaminoglycans (s-GAGs) and matrix metalloproteinase-2 (MMP-2) activity by DMMB binding assay and zymography, respectively. The explant tissues were analyzed for the remaining of uronic acid content by colorimetric assay and stained with safranin-O for investigation of proteoglycan content. Cell viability of this model was evaluated by lactate dehydrogenase (LDH) assay. Chondroprotective potential of PAE and the major components against IL-1β-induced cartilage explant degradation were revealed by the decreased s-GAGs level and MMP-2 activity in culture medium consistent with an increase in uronic acid and proteoglycan contents in the explants when compared to the IL-1β treatment. These results agreed with those of diacerein and sesamin which used as positive controls. In addition, better chondroprotective activities of P. amarus crude extracts than those of the purified components were disclosed in this study. Hence, this is a pioneering study presenting the chondroprotective potential of PAE which may augment its application for therapeutic use as an antiarthritic agent.

Proteoglycan Expression Is Influenced by Mechanical Load in TMJ Discs

The expression and assembly of the extracellular matrix are profoundly associated with adaptive and pathological responses of the temporomandibular joint (TMJ). To better understand the adaptive responses of the TMJ disc to mechanical loading, we examined the expression of 2 modular proteoglycans and 10 small leucine-rich proteoglycans (SLRPs) at the mRNA and protein levels and determined the contents of proteoglycan-related glycosaminoglycans (GAGs) in rat TMJ discs in response to altered mechanical loading caused by an incisal bite plane. One hundred thirty 7-week-old male Wistar rats were assigned to control and bite plane groups. TMJ disc thickness and the intensity of toluidine blue staining of metachromasia increased in the posterior band after 2 weeks of wearing the bite plane. GAG content increased significantly in the bite plane group after 2 weeks. Quantitative real-time RT-PCR (reverse transcription polymerase chain reaction) analysis indicated that biglycan and chondroadherin mRNA levels increased after 2 weeks and that the level of decorin mRNA increased at 4 weeks. Versican mRNA levels increased after 3 weeks, particularly for the V0 and V1 versican isoforms, which carry more GAG attachment sites than do the V2 and V3 isoforms. Western analysis demonstrated a corresponding increase in the levels of versican, biglycan, and decorin core proteins at 4 weeks in the bite plane group. These results indicate that mechanical loading differentially influences proteoglycan mRNA expression and protein accumulation in the TMJ disc. The change in proteoglycan mRNA and protein levels may lead to the modulation of matrix–matrix and cell–matrix interactions and has important biological significance for adaptation to complicated biomechanical requirements and for tissue maintenance in the TMJ disc.

Differential limb loading in miniature pigs (Sus scrofa domesticus): a test of chondral modeling theory

Variation in mechanical loading is known to influence chondrogenesis during joint formation. However, the interaction among chondrocyte behavior and variation in activity patterns is incompletely understood, hindering our knowledge of limb ontogeny and function. Here, the role of endurance exercise in the development of articular and physeal cartilage in the humeral head was examined in 14 miniature swine (Sus scrofa domesticus). One group was subjected to graded treadmill running over a period of 17 weeks. A matched sedentary group was confined to individual pens. Hematoxylin and eosin staining was performed for histomorphometry of cartilage zone thickness, chondrocyte count and cell area, with these parameters compared multivariately between exercised and sedentary groups. Comparisons were also made with femora from the same sample, focusing on humerus-femur differences between exercised and sedentary groups, within-cohort comparisons of humerus-femur responses and correlated changes within and across joints. This study shows conflicting support for the chondral modeling theory. The humeral articular cartilage of exercised pigs was thinner than that of sedentary pigs, but their physeal cartilage was thicker. While articular and physeal cartilage demonstrated between-cohort differences, humeral physeal cartilage exhibited load-induced responses of greater magnitude than humeral articular cartilage. Controlling for cohort, the humerus showed increased chondrocyte mitosis and cell area, presumably due to relatively greater loading than the femur. This represents the first known effort to evaluate chondral modeling across multiple joints from the same individuals. Our findings suggest the chondral response to elevated loading is complex, varying within and among joints. This has important implications for understanding joint biomechanics and development.

Using functional tissue engineering and bioreactors to mechanically stimulate tissue-engineered constructs

Bioreactors precondition tissue-engineered constructs (TECs) to improve integrity and hopefully repair. In this paper, we use functional tissue engineering to suggest criteria for preconditioning TECs. Bioreactors should (1) control environment during mechanical stimulation; (2) stimulate multiple constructs with identical or individual waveforms; (3) deliver precise displacements, including those that mimic in vivo activities of daily living (ADLs); and (4) adjust displacement patterns based on reaction loads and biological activity. We apply these criteria to three bioreactors. We have placed a pneumatic stimulator in a conventional incubator and stretched four constructs in each of five silicone dishes. We have also programmed displacement-limited stimuli that replicate frequencies and peak in vivo patellar tendon (PT) strains. Cellular activity can be monitored from spent media. However, our design prevents direct TEC force measurement. We have improved TEC stiffness as well as PT repair stiffness and shown correlations between the two. We have also designed an incubator to fit within each of two electromagnetic stimulators. Each incubator provides cell viability like a commercial incubator. Multiple constructs are stimulated with precise displacements that can mimic ADL strain patterns and record individual forces. Future bioreactors could be further improved by controlling and measuring TEC displacements and forces to create more functional tissues for surgeons and their patients.

Temporomandibular joint soft-tissue pathology, I: Disc abnormalities

The internal derangements are the most common noninflammatory abnormalities of the disc, observed even in asymptomatic subjects. Because the temporomandibular joint shows large adaptative and compensatory mechanisms over dysfunctional disc motion, these disorders may be asymptomatic or minimally evident for a long time. A careful clinical evaluation, reinforced by imaging findings, should help differentiate asymptomatic derangements from painful conditions that may require treatment.

Pushing the limit: masticatory stress and adaptive plasticity in mammalian craniomandibular joints

Excessive, repetitive and altered loading have been implicated in the initiation of a series of soft- and hard-tissue responses or ;functional adaptations' of masticatory and locomotor elements. Such adaptive plasticity in tissue types appears designed to maintain a sufficient safety factor, and thus the integrity of given element or system, for a predominant loading environment(s). Employing a mammalian species for which considerable in vivo data on masticatory behaviors are available, genetically similar domestic white rabbits were raised on diets of different mechanical properties so as to develop an experimental model of joint function in a normal range of physiological loads. These integrative experiments are used to unravel the dynamic inter-relationships among mechanical loading, tissue adaptive plasticity, norms of reaction and performance in two cranial joint systems: the mandibular symphysis and temporomandibular joint (TMJ). Here, we argue that a critical component of current and future research on adaptive plasticity in the skull, and especially cranial joints, should employ a multifaceted characterization of a functional system, one that incorporates data on myriad tissues so as to evaluate the role of altered load versus differential tissue response on the anatomical, cellular and molecular processes that contribute to the strength of such composite structures. Our study also suggests that the short-term duration of earlier analyses of cranial joint tissues may offer a limited notion of the complex process of developmental plasticity, especially as it relates to the effects of long-term variation in mechanical loads, when a joint is increasingly characterized by adaptive and degradative changes in tissue structure and composition. Indeed, it is likely that a component of the adaptive increases in rabbit TMJ and symphyseal proportions and biomineralization represent a compensatory mechanism to cartilage degradation that serves to maintain the overall functional integrity of each joint system. Therefore, while variation in cranial joint anatomy and performance among sister taxa is, in part, an epiphenomenon of interspecific differences in diet-induced masticatory stresses characterizing the individual ontogenies of the members of a species, this behavioral signal may be increasingly mitigated in over-loaded and perhaps older organisms by the interplay between adaptive and degradative tissue responses.

Effects of Ascorbic Acid Concentration on the Tissue Engineering of the Temporomandibular Joint Disc

The temporomandibular joint (TMJ) disc is a specialized fibrocartilaginous tissue. When the disc becomes an obstacle and becomes damaged, surgeons have no choice but to perform a discectomy. Tissue engineering may provide a novel treatment modality for TMJ disorder patients who undergo discectomy. No studies have been conducted on the most favourable media for TMJ disc cells. The objective of the current study was to examine the effects on biochemical and biomechanical properties of varying ascorbic acid concentrations (0, 25, or 50 μg/ml) on TMJ disc cells seeded on non-woven PGA scaffolds. The ascorbic acid concentration of the 25 μg/ml group resulted in more effective cell seeding of the scaffolds, with 1.53 million cells per construct, by comparison with the 0 and 50 μg/ml groups which had 1.20 million and 1.32 million cells per scaffold respectively. At week 4, the 25 μg/ml group had a higher collagen content than the 0 μg/ml group, with 30.4 ± 2.7 and 24.9 ± 3.3 μg of collagen per construct respectively. The 25 μg/ml group had a higher aggregate modulus than the 50 μg/ml group, with values of 6.1 ± 1.3 and 4.0 ± 0.9 kPa respectively at week 4. The results of this study indicate that the use of 25 μg/ml of ascorbic acid in culture media is effective for the tissue engineering of the TMJ disc, significantly outperforming media without or with 50 μg/ml of ascorbic acid.

Pathogenesis of degenerative temporomandibular joint arthritides

Over the past decade, remarkable progress has been made in the study of molecular mechanisms involved in degenerative temporomandibular joint arthritides. Based on recent findings, models of degenerative temporomandibular joint disease predict that mechanical loads trigger a cascade of molecular events leading to disease in susceptible individuals. These events involve the production or release of free radicals, cytokines, fatty acid catabolites, neuropeptides, and matrix-degrading enzymes. Under normal circumstances, these molecules may be involved in the remodeling of articular tissues in response to changing functional demands. However, if functional demands exceed the adaptive capacity of the temporomandibular joint or if the affected individual is susceptible to maladaptive responses, then a disease state will ensue. An individual's susceptibility to degenerative temporomandibular joint disease may be determined by several factors, including genetic backdrop, sex, age, and nutritional status. It is hoped that, by furthering our understanding of the molecular events that underlie degenerative temporomandibular joint diseases, improved diagnostics and effective therapies for these debilitating conditions will be developed.

Hyaluronan secretion by synoviocytes is mechanosensitive

Hyaluronan (HA) is an essential component of synovial interstitial matrix and synovial fluid, but the link between its production and joint use is unclear. HA secretion is enhanced by joint distension in vivo, but direct proof that synoviocytes exhibit mechanosensitive HA secretion is lacking. We tested this in vitro. Primary rabbit synoviocyte (PRS) cultures from microdissected synovial intima were subjected to 180 min of maintained 10% static stretch, or to 10 min of 10% static stretch followed by 170 min relaxation, in a Flexcell 2000 apparatus. Stretch stimulated HA secretion into the medium over 3 h by 57%. Notably, a short stretch (10 min) was as effective as sustained stretch. Actinomycin D and cycloheximide abolished stretch-stimulated HA secretion and also reduced basal HA secretion rate. RT-PCR showed that HAS2 was the major hyaluronan synthase expressed, but there was no increase in HAS2 mRNA (or other isoforms) in continuously stretched cells, and only a small increase (20%) at 180 min in cells stretched for the first 10-30 min. However HAS2 transcription increased 10-fold in response to TGF-beta1 and IL-1beta. Thus HA secretion by intimal synoviocytes is regulated by a mechanosensitive pathway which depends on transcription and de novo protein synthesis, possibly of HAS2, but also of other proteins involved in HA secretion.

Effects of Initial Cell Seeding Density for the Tissue Engineering of the Temporomandibular Joint Disc

Tissue engineering may provide a better treatment modality for postoperative discectomy patients. The TMJ disc is an ideal candidate for tissue engineering approaches because of its lack of an intrinsic regenerative ability. Unfortunately, basic knowledge related to TMJ disc tissue engineering is still at an infancy level and not on par to that related to articular cartilage tissue engineering. The objective of this study was to examine the effects of initial cell density of TMJ disc cells seeded in nonwoven poly-glycolic acid (PGA) scaffolds on the biochemical and biomechanical properties of constructs examined at 0, 3, and 6 weeks after seeding. Low, medium, and high seeding densities were chosen to be 15, 30, and 120 million cells per ml of scaffold, which were seeded using a spinner flask. Significant differences were found temporally and as a function of seeding density in morphology, total collagen, GAG content, and permeability of the constructs, but not in aggregate modulus. The high seeding density group outperformed the low and medium groups in collagen and GAG content at all time points measured. The high-density group produced a total of 55.37 +/- 3.56 microg of collagen per construct, maintained 15.77 +/- 1.86 microg of GAG per construct, and only shrunk to 50% of the original scaffold size. Permeability of the constructs at 6 weeks was decreased by 70% compared to 0 weeks.

Quantitative analysis and comparative regional investigation of the extracellular matrix of the porcine temporomandibular joint disc

Characterization of the extracellular matrix of the temporomandibular joint (TMJ) disc is crucial to advancing efforts in tissue engineering the disc. However, the current literature is incomplete and often contradictory in its attempts to describe the nature of the TMJ disc matrix. The aim of this study was to identify the variation of key matrix components along the three axes of the porcine disc using ELISAs to quantify these matrix components, immunohistochemistry to identify their regional distribution, and SEM to examine collagen fiber diameter and orientation. The overall GAG content of the TMJ disc (including the dermatan sulfate proteoglycans) was 5.3+/-1.2% of the dry weight. Chondroitin sulfate, which comprised 74% of this total GAG content, was 4.4, 8.2, and 164 times more abundant than dermatan sulfate proteoglycan, keratan sulfate, and hyaluronic acid, respectively. In general, these GAGs were most concentrated in the intermediate zone of the TMJ disc, appearing in dense clusters, and least concentrated in the posterior band. Additionally, chondroitin sulfate was more abundant medially than laterally. Collagen II was discovered in trace amounts, with higher relative amounts in the intermediate zone. Collagen fibers were observed to run primarily in a ring-like fashion around the periphery of the disc and anteroposteriorly through the intermediate zone, with a mean fiber diameter of 18+/-9 mum. Characterization studies of the TMJ disc, including prior biomechanical and cell studies along with the current study of the extracellular matrix, collectively reveal a distinct character of the intermediate zone of the disc compared to its anterior and posterior bands.

Motivation, characterization, and strategy for tissue engineering the temporomandibular joint disc

The purpose of this review is to serve as the standard point of reference in guiding researchers investigating the tissue engineering of the temporomandibular joint (TMJ) disc. Tissue engineering of the TMJ disc is in its infancy, and currently there exists a gap between the tissue engineering community and the TMJ characterization community. The primary goal is to help bridge that gap by consolidating the characterization studies here as a reference to researchers attempting to tissue engineer the TMJ disc. A brief review of TMJ anatomy is provided, along with a description of relevant pathology, current treatment, and a rationale for engineering the TMJ disc. The biochemical composition and organization of the disc are reviewed, including glycosaminoglycan (GAG) and collagen content. The collagen of the disc is almost exclusively type I and primarily runs anteroposteriorly through the center and in a ringlike fashion around the periphery. The GAG content is approximately an order of magnitude less than that of hyaline cartilage, and although the distribution is not entirely clear, it seems as though chondroitin and dermatan sulfate are by far the primary GAGs. Cellular characterization and mechanical properties under compression, tension, and shear are reviewed as well. The cells of the disc are not chondrocytes, but rather resemble fibrocytes and fibrochondrocytes and may be of the same lineage. Mechanically, the disc is certainly anisotropic and nonhomogeneous. Finally, a review of efforts in tissue engineering and cell culture studies of the disc is provided and we close with a description of the direction we envision/propose for successful tissue engineering of the TMJ disc.

Growth and development: hereditary and mechanical modulations

Growth and development is the net result of environmental modulation of genetic inheritance. Mesenchymal cells differentiate into chondrogenic, osteogenic, and fibrogenic cells: the first 2 are chiefly responsible for endochondral ossification, and the last 2 for sutural growth. Cells are influenced by genes and environmental cues to migrate, proliferate, differentiate, and synthesize extracellular matrix in specific directions and magnitudes, ultimately resulting in macroscopic shapes such as the nose and the chin. Mechanical forces, the most studied environmental cues, readily modulate bone and cartilage growth. Recent experimental evidence demonstrates that cyclic forces evoke greater anabolic responses of not only craniofacial sutures, but also cranial base cartilage. Mechanical forces are transmitted as tissue-borne and cell-borne mechanical strain that in turn regulates gene expression, cell proliferation, differentiation, maturation, and matrix synthesis, the totality of which is growth and development. Thus, hereditary and mechanical modulations of growth and development share a common pathway via genes. Combined approaches using genetics, bioengineering, and quantitative biology are expected to bring new insight into growth and development, and might lead to innovative therapies for craniofacial skeletal dysplasia including malocclusion, dentofacial deformities, and craniofacial anomalies such as cleft palate and craniosynostosis, as well as disorders associated with the temporomandibular joint.

Impulsive compression influences the viscous behavior of porcine temporomandibular joint disc

Traumatic joint injury is known to produce osteoarthritic degeneration in the temporomandibular joint (TMJ). However, little information, is available on its possible effect on the dynamic viscoelastic behavior of the disc. In the present study, impulsive compression was applied to the disc as a model for traumatic joint injury. This was tested in 32 porcine discs. Prior to a dynamic tensile test, impulsive compression with strain rates of 0.01, 0.1 and 1 s(-1) to a final strain of 30% was applied to these discs. Tensile stress was applied in the antero-posterior direction with a wide range of frequencies (0.1-100 Hz). The dynamic E-moduli increased as the loading frequency increased. The dynamic viscosity and elasticity decreased with an increase of strain rate, although the effect on viscosity was greater than on elasticity. The results suggest that strain rate and subsequent peak stress of impulsive compression affect primarily the dynamic viscosity of the disc, and that impulsive compression at high strain rates reduces the resistance of the TMJ disc to stress, resulting in permanent disc deformation and perforation.

Biomechanical behavior of the temporomandibular joint disc

The temporomandibular joint (TMJ) disc consists mainly of collagen fibers and proteoglycans constrained in the interstices of the collagen fiber mesh. This construction results in a viscoelastic response of the disc to loading and enables the disc to play an important role as a stress absorber during function. The viscoelastic properties depend on the direction (tension, compression, and shear) and the type of the applied loading (static and dynamic). The compressive elastic modulus of the disc is smaller than its tensile one because the elasticity of the disc is more dependent on the collagen fibers than on the proteoglycans. When dynamic loading occurs, the disc is likely to behave less stiffly than under static loading because of the difference of fluid flow through and out of the disc during loading. In addition, the mechanical properties change as a result of various intrinsic and extrinsic factors in life such as aging, trauma, and pathology. Information about the viscoelastic behavior of the disc is required for its function to be understood and, for instance, for a suitable TMJ replacement device to be constructed. In this review, the biomechanical behavior of the disc in response to different loading conditions is discussed.

The effects of mechanical strain on synovial fibroblasts

PURPOSE

Arthritic diseases of the temporomandibular joint, such as rheumatoid arthritis and osteoarthritis, suggest that inflammatory mediators and metalloproteinases may play a role in their pathogenesis. Recent clinical evidence from physical therapy and other modalities has shown a significant decrease in temporomandibular joint symptoms in patients with early disease. This project examines the effect of mechanical strain on synovial fibroblasts' production of inflammatory mediators including prostaglandin E(2) (PGE(2)) and proteinases.

MATERIALS AND METHODS

An established synovial fibroblast cell line (HIG-82) was grown to confluency in modified Eagle's medium supplemented with 10% fetal calf serum. The monolayer of fibroblasts was then subjected to mechanical strain using the Flexercell Strain Unit (Flexcell International Corporation, McKeesport, PA) at 3 cycles per minute, with 10 seconds' elongation of up to 24% and 10 seconds of relaxation. Levels of PGE(2) were determined by radioimmunoassay using commercially available product and measured in nanograms per milliliter of supernatant. Proteinases collagenase, gelatinase, and stromelysin were measured by H(3) radioactive labeling of acidic anhydride to the specific substrate. Enzymatic proteolysis of the radiolabeled substrate was then measured in supernate as units per milliliter. Statistical analysis of all results was performed using Student's t test in triplicate.

RESULTS

PGE(2) levels of mechanically activated cells was 18.1 +/- 13.4 ng/mL, with control levels being 58.0 +/- 9.2 ng/mL. This is a statistically significant decrease, between strained and unstrained cells with P <.05. In control cells, proteinase activity that degrades collagen, gelatin, or casein was 4.27 +/- 1.5, 4.62 +/- 0.11, or 0.11 +/- 0.01 U/mL, respectively. Levels for mechanically strained cells were 3.99 +/- 1.90, 4.02 +/- 0.90, and 0.12 +/- 0.01 U/mL, respectively. These results show that there is a significant decrease in PGE(2) levels of synovial fibroblasts undergoing mechanical strain. Proteinases examined show no difference in levels between mechanically activated fibroblasts and their controls.

CONCLUSION

This decrease in PGE(2) production in synovial fibroblasts could help elucidate the mechanism by which physical therapy, and in particular continuous passive motion, may decrease inflammatory mediators of the temporomandibular joint.

The proteoglycan contents of the temporomandibular joint disc influence its dynamic viscoelastic properties

The collagen fibers and proteoglycans in the disc of temporomandibular joint provide resistance to various loadings. Thus far, however, the role of the proteoglycans in determining the viscoelastic properties of the disc has not been investigated. In the present study the hypothesis was tested that the viscoelastic behavior of the disc decreases by the removal of proteoglycans. In 32 bovine discs, dynamic tensile tests with a wide range of frequencies were performed. Before testing, specimens were treated with different concentrations of alpha-amylase to remove proteoglycans. As the frequency increased from 0.1 to 100 Hz, the disc became more viscoelastic. Increasing the concentration of alpha-amylase significantly decreased its viscoelasticity. It was concluded that proteoglycans play an important role in determining the viscoelastic properties of the disc and, therefore, give the disc a greater capacity for distributing and reducing stresses.

Structure and function of the temporomandibular joint disc: implications for tissue engineering

The temporomandibular joint (TMJ) disc is a little understood structure that, unfortunately, exhibits a plethora of pathologic disorders. Tissue engineering approaches may be warranted to address TMJ disc pathophysiology, but first a clear understanding of structure-function relationships needs to be developed, especially as they relate to the regenerative potential of the tissue. In this review, we correlate the biochemical content of the TMJ disc to its mechanical behavior and discuss what this correlation infers for tissue engineering studies of the TMJ disc. The disc of the TMJ exhibits a somewhat biconcave shape, being thicker in the anterior and posterior bands and thinner in the intermediate zone. The disc, which is certainly an anisotropic and nonhomogeneous tissue, consists almost entirely of type I collagen with trace amounts of type II and other types. In general, collagen fibers in the intermediate zone appear to run primarily in an anteroposterior direction and in a ringlike fashion around the periphery. Collagen orientation is reflected in higher tensile stiffness and strength in the center anteroposteriorly than mediolaterally and in the anterior and posterior bands than the intermediate zone mediolaterally. Tensile tests have shown the disc is stiffer and stronger in the direction of the collagen fibers. Elastin fibers in general appear along the collagen fibers and most likely function in restoring and retaining disc form after loading. The 2 primary glycosaminoglycans of the disc by far are chondroitin sulfate and dermatan sulfate, although their distribution is not clear. Compression studies are conflicting, but evidence suggests the disc is compressively stiffest in the center. Only a few tissue engineering studies of the TMJ disc have been performed to date. Tissue engineering studies must take advantage of existing information for experimental design and construct validation, and more research is necessary to characterize the disc to create a clearer picture of our goals in tissue engineering the TMJ disc.

Biomechanical response of bovine temporomandibular joint disc to prolonged tensile stress

This study was designed to evaluate the influence of prolonged tensile stress on the viscoelasticity of the temporomandibular joint (TMJ) disc. Twenty discs from 10, 3-year-old cattle were used. Tensile stress of 1.5 MPa was applied to specimens from the discs for 10, 20, 40 and 60 min. Following the prescribed period of tension for creep, the specimens were removed from the tension device and any recovery observed for 20 min. In all specimens, strain increased at the onset of stress application and reached almost steady conditions after 5 min. Although, the strain became slightly larger when the creep time was longer, no significant differences were found in the strains between any two tests with different periods of creep. The residual strain increased significantly with creep duration, and similarly the degree of recovery decreased significantly. In 10- and 20-min creep tests, the residual strains were 0.1 and 1.0%, the specimens in 40- and 60-min tests revealed irreversible changes in length. It was concluded that continuous loading for >40 min causes creep damage in bovine TMJ disc, and that prolonged sustained tension affects the recovery of joint homeostasis.

The regional difference of viscoelastic property of bovine temporomandibular joint disc in compressive stress-relaxation

An in vitro experimental technique was performed to measure the viscoelastic properties of the bovine disc. Thirteen TMJ discs from young cattle (3-year-old) were used. Each disc was divided into five specimens of anterior, central, posterior, lateral and medial regions, and they were used for compression tests. A series of stress-relaxation tests was conducted for each specimen from 5% strain up to 20% strain with 5% intervals. The stress-relaxation was monitored over a period of 5 min. Each region exhibited a different biomechanical behavior, which is presumably related to the organization and distribution of proteoglycans that indirectly modulate the stiffness of the collagen network. It is suggested that an improved understanding of the viscoelastic properties of the disc under function may guide consideration for design and selection of biomaterials for TMJ reconstruction.

Viscoelastic properties and residual strain in a tensile creep test on bovine temporomandibular articular discs

This study was designed to evaluate the creep characteristics and residual strain of bovine temporomandibular joint (TMJ) discs in tension. Twenty discs were divided into three specimens each: central, lateral and medial regions. Tension of 1.0 MPa was applied and sustained for 20 min to the specimens from 10 right-side discs, and tension of 1.5 MPa to specimens from 10 left-side discs. After the period of tension for creep, the specimens were removed from the tension devices and restoration observed for 20 min. Time-dependent creep curves showed a marked change in strain during the initial 5s. The essential time delay in strain ceased after 2 min, and strain reached an almost steady level after 3 min. At a tensile stress of 1.5 MPa, a strain of 14.5% on average was produced after 20 min creep in the central specimens; peripheral specimens showed strains of 12.4% on average. There were significant differences in strain between the central and peripheral specimens. The residual strain after 20 min restoration was 0.93% on average and there were no significant regional differences. This creep feature could be well represented by a generalized linear viscoelastic model. It was concluded that the regional differences in viscoelasticity might be caused by the complicated articulating functions of the TMJ, and that the residual strain caused by sustained stress could be an important factor in disc deformation.

Arterial wall chondroitin sulfate proteoglycans: diverse molecules with distinct roles in lipoprotein retention and atherogenesis

Chondroitin sulfate proteoglycans (CSPGs) of the arterial wall are generally considered to be atherogenic because of their ability to trap cholesterol-rich lipoproteins in vitro. Nevertheless, CSPGs are a diverse group of molecules with a long evolutionary history and distinct biologic functions. The three principal CSPGs in the arterial wall are versican, which is part of the hyalectan gene family; and decorin and biglycan, which are members of a separate gene family, the small leucine-rich proteoglycans. Importantly, there is now substantial evidence that the different molecular species of CSPGs participate unequally in lipoprotein retention, and that they exert unequal regulatory effects that are related to atherogenesis. Recently available murine models with genetic manipulations that affect CSPGs now allow causal studies of the roles of these molecules to be conducted in vivo, with occasionally surprising results. Moreover, tools are being developed to examine human genetic variations that are relevant to CSPGs, which may provide additional important insights into the human disease. The era in which proteoglycans are regarded as a nondescript backdrop, playing purely nonspecific structural roles, is over. Studies in manipulated animals and in human populations will continue to reveal precise, dynamic roles for these fascinating and ancient molecules.

Viscoelastic properties of the human temporomandibular joint disc in patients with internal derangement

PURPOSE

This study investigated the viscoelastic properties of human temporomandibular joint (TMJ) discs in patients with severe internal derangement (ID).

PATIENTS AND METHODS

TMJ discs obtained from 5 patients with severe TMJ internal derangement were analyzed. Normal discs derived from 2 fresh cadavers and 4 patients without ID served as the controls. The viscoelastic responses of the discs to tensile forces were evaluated by means of stress-strain analyses.

RESULTS

The discs in both groups exhibited a nonlinear stress-strain relationship that was represented by a power function of the strain. However, after stress relaxation, the ID discs were likely to exhibit a linear stress-strain relationship. The instantaneous elastic moduli were almost the same in both discs, but the relaxed elastic modulus of the ID discs was significantly greater than that of the controls in lower strain range of less than 2%.

CONCLUSIONS

ID discs are more rigid than normal discs. These findings suggest that the changes in viscoelastic property of the discs in patients with ID are somewhat different from those that occur with aging.

Viscoelastic properties of canine temporomandibular joint disc in compressive load-relaxation

The present study was designed to investigate the mechanical properties and load-relaxation of these discs in compression. Eight discs were used for the experiments. Compression was applied to specimens up to the specified strain, and a series of load-relaxation tests was conducted on each specimen from 0.25% strain to 2.0% strain with 0.25% intervals. The load-relaxation was monitored over a period of 2 min. The elastic moduli of the canine articular discs were 30.9 and 15.8 MPa at t = 0 and 120 sec, respectively, and the discs exhibited near-linear elastic characteristics at each time within a 2-min period. At all strains, the time-dependent load-relaxation curves showed that the load decreased markedly for the initial 30 sec, after which it levelled off after 120 sec with a steady nonzero level. This relaxation feature can be well represented by Kelvin's model. It is concluded that the canine temporomandibular joint disc can be represented as a linear viscoelastic material, and that it plays an important part as a stress absorber under compression.

Histochemical studies of glycosaminoglycans in developing periodontal ligaments of ICR mice

Although the periodontal ligament (PL) contains an abundance of glycosaminoglycans (GAGs), there are only a few histochemical studies describing GAGs in the developing PL. In the present study, the relationship between the formation of principal fibers and the molecular species of GAGs in the developing PL was examined by light microscopic histochemistry. Jcl:ICR mice were killed on day 0 to day 28 after birth. Paraffin-embedded tissue sections were routinely made and stained with hematoxylin-eosin (H&E), Azan, or the sensitized high iron diamine (S-HID) procedure combined with enzyme digestions. Before tooth eruption, thin threads of collagen fibers in the PL assembled and constructed principal fibers, which projected from both the side of the alveolar bone and the root of the tooth. After tooth eruption, the principal fibers from both sides were tightly entangled. In the developing PL, the molecular species of GAGs was mainly dermatan sulfate. Moreover, the relative amount of dermatan sulfate increased together with the maturation of the principal fibers, while the principal fibers adjacent to the alveolar bone and cementum contained chondroitin sulfate. These results suggest that dermatan sulfate contributes to collagen fiber assembly in the PL and that chondroitin sulfate relates to PL adhesion to the alveolar bone and to the cementum of the root.

An immunohistochemical study of the localization of biglycan, decorin and large chondroitin-sulphate proteoglycan in adult rat temporomandibular joint disc

To analyse regional variations in extracellular matrix components of adult rat temporomandibular joint discs, immunohistochemical techniques were used to examine the localization of two small dermatan-sulphate proteoglycans, biglycan and decorin, and a large chondroitin-sulphate proteoglycan. Staining for biglycan was intense in the posterior band, although it had a rather weak and even distribution throughout the disc. In contrast, staining for decorin was faint in the intermediate zone and the central part of the posterior band, moderate in the anterior and posterior attachments and most intense in the junction between the anterior band and attachment. The upper surface of the disc stained more intensely than the lower. Similarly, there was intense staining for large chondroitin-sulphate proteoglycan in the peripheral band, but both the anterior and the temporal parts of the posterior attachments were faintly stained. These results demonstrate marked regional differences in the expression of biglycan, decorin and large chondroitin-sulphate proteoglycan in the temporomandibular joint discs of adult rats. These variations probably reflect the different biomechanical environments caused by the complicated articulatory functions of the temporomandibular joint.

Proteoglycan expression in the rat temporomandibular joint in response to unilateral bite raise

The vertebrate articular tissue consists of collagen fibers embedded in a ground substance. Collagen resists tensile forces, while proteoglycans in the ground substance provide resilience and resistance to compression. It was hypothesized that unilateral bite raise would induce increasing expression of proteoglycans in TMJ articular tissues. As a test of this hypothesis, six- and nine-week-old Sprague-Dawley rats received unilateral bite-raising appliances bonded to their right upper molars for 4 wks. A group of nine-week-old rats was housed for an additional 4 wks after removal of the appliances they had worn for 4 wks. Proteoglycans that carry abundant chondroitin sulfate and keratan sulfate side-chains, most likely aggrecans, were detected by safranin O in the fibrocartilaginous zone of the condyle in parasagittal sections. A monoclonal antibody against a large chondroitin sulfate proteoglycan related to versican reacted strongly in the surface fibrous layer of the mandibular condyle and moderately in the discs of the treated specimens. Computer quantification for safranin O and anti-versican antibody staining revealed that the average intensities of the treated specimens were significantly higher than those of their corresponding sham-operated controls, and the average intensities of the treatment-reversal specimens had no significant differences from their corresponding sham-operated controls. Thus, unilateral bite raise appeared to have induced an increase in the expression of aggrecan in the condylar cartilage and a proteoglycan related to versican in the TMJ disc and the articular surface of the condyle. The elevated proteoglycan expression is interpreted to suggest that unilateral bite raise leads to an increase in the magnitude of compressive forces in the rat temporomandibular joint.

Human chondroitin 6-sulfotransferase: cloning, gene structure, and chromosomal localization

Chondroitin 6-sulfotransferase (C6ST) is the key enzyme in the biosynthesis of chondroitin 6-sulfate, a glycosaminoglycan implicated in chondrogenesis, neoplasia, atherosclerosis, and other processes. C6ST catalyzes the transfer of sulfate from 3'-phosphoadenosine 5'-phosphosulfate to carbon 6 of the N-acetylgalactosamine residues of chondroitin. Based on the previously published avian sequence, we searched the database of expressed sequence tags (dbEST) and obtained partial-length cDNAs that we completed by 5'-RACE using human chondrosarcoma and endothelial-cell RNA as template. Stable transfection of our full-length expression construct into CHO-K1 cells resulted in marked increases in C6ST and keratan sulfate sulfotransferase (KSST) enzymatic activities in cell homogenates. The predicted 411 amino acid sequence of human C6ST contains an N-terminal hydrophobic domain consistent with membrane insertion, four potential sites for N-linked glycosylation, several consensus sequences for protein phosphorylation, and one RGD sequence. The human and chick C6ST cDNA share 51% nucleotide identity, 40% amino acyl identity, and 75% amino acyl conservation. The human C6ST gene structure has been elucidated and exhibits an intron-less coding region, and the gene has been mapped to human chromosome 11 by radiation hybrid panel mapping.