Stabilization and activation of Pluronic micelles for tumor-targeted drug delivery

Increasing the aqueous solubility of the anesthetic propofol through wormlike micelle formation

Propofol, a phenol derivative, is commonly employed as an intravenous anesthetic during clinical procedures, formulated as an oil/water emulsion due to its poor solubility in water. The stability limitations associated with emulsions have prompted research efforts towards developing aqueous formulations of propofol. In this work, we investigate the solubility enhancement of propofol in anionic and cationic surfactants. Our findings reveal that the solubility of propofol can increase significantly, up to 100-fold, depending on the nature of the micellar aggregate, as observed for alkylammonium halogenates CnTAB (for n = 12, 14 and 16), contrasting with the lower solubility with SDS. Interestingly, C14TAB and C16TAB demonstrate significantly higher solubility than C12TAB. This was attributed to the formation of wormlike micelles, in which the propofol molecules are positioned between the cationic heads of the surfactant molecules, changing the micellar curvature and the morphology of the aggregate. Therefore, the aromatic molecules in the micellar environment can be partitioned into the micellar cores and their palisades. Regarding C12TAB, the alkyl chain is too short to form wormlike micelles, thus, concentrating propofol molecules mainly into the micellar core, and consequently, leading to their aggregation. Solubility diagrams of propofol were constructed in conjunction with different surfactants. The systems exhibiting viscoelastic behavior, indicative of wormlike micelle formation, were further investigated using rheology. Additionally, the fluorescent properties of propofol enabled the examination of the anesthetic molecule within diverse micellar environments.

Advances in 3D Bioprinting: Techniques, Applications, and Future Directions for Cardiac Tissue Engineering

Cardiovascular diseases are the leading cause of morbidity and mortality in the United States. Cardiac tissue engineering is a direction in regenerative medicine that aims to repair various heart defects with the long-term goal of artificially rebuilding a full-scale organ that matches its native structure and function. Three-dimensional (3D) bioprinting offers promising applications through its layer-by-layer biomaterial deposition using different techniques and bio-inks. In this review, we will introduce cardiac tissue engineering, 3D bioprinting processes, bioprinting techniques, bio-ink materials, areas of limitation, and the latest applications of this technology, alongside its future directions for further innovation.

Rylene Dye-Loaded Polymeric Nanoparticles for Photothermal Eradication of Harmful Dinoflagellates, Akashiwo sanguinea and Alexandrium pacificum

In the era of climate changes, harmful dinoflagellate outbreaks that produce potent algal toxins, odor, and water discoloration in aquatic environments have been increasingly reported. Thus, various treatments have been attempted for the mitigation and management of harmful blooms. Here, we report engineered nanoparticles that consist of two different types of rylene derivatives encapsulated in polymeric micelles. In addition, to avoid dissociation of the aggregate, the core of micelle was stabilized via semi-interpenetrating network (sIPN) formation. On two types of the marine red-tide dinoflagellates, Akashiwo sanguinea and Alexandrium pacificum, the nanoparticle uptake followed by fluorescence labeling and photothermal effect was conducted. Firstly, fluorescence microscopy enabled imaging of the dinoflagellates with the ultraviolet chromophore, Lumogen Violet. Lastly, near-infrared (NIR) laser irradiation was exposed on the Lumogen IR788 nanoparticle-treated Ak. Sanguinea. The irradiation resulted in reduced cell survival due to the photothermal effect in microalgae. The results suggested that the nanoparticle, IR788-sIPN, can be applied for potential red-tide algal elimination.

Facile Synthesis of a Redox-Responsive Hyperbranched Polymer Prodrug as a Unimolecular Micelle for the Tumor-Selective Drug Delivery

Demicellization of the self-assembled multimolecular micelles upon dilution restricts their application as drug delivery systems (DDSs) for tumor treatment. Here, a redox-responsive hyperbranched polymer prodrug (HBPP) was designed with a high drug content of 62.0% as a unimolecular micelle for the tumor-selective drug delivery, via the facile self-condensing vinyl polymerization (SCVP) of redox-responsive doxorubicin-based prodrug monomer MA-SS-DOX and poly(ethylene glycol) methacrylate (PEGMA) with p-chloromethylstyrene (CMS) as an inimer. The unimolecular micelle could be easily obtained with a hydrodynamic diameter of 122 nm, showing excellent GSH-triggered drug release performance with a cumulative release of 60.9% within 85 h but a low premature drug leakage of 3.2%. The unimolecular micelle exhibited selective tumor growth inhibition on HepG2 cells but no obvious cytotoxicity on L02 cells.

Ultrasound-Mediated Cancer Therapeutics Delivery using Micelles and Liposomes: A Review

BACKGROUND

Existing cancer treatment methods have many undesirable side effects that greatly reduce the quality of life of cancer patients.

OBJECTIVE

This review will focus on the use of ultrasound-responsive liposomes and polymeric micelles in cancer therapy.

METHODS

This review presents a survey of the literature regarding ultrasound-triggered micelles and liposomes using articles recently published in various journals, as well as some new patents in this field.

RESULTS

Nanoparticles have proven promising as cancer theranostic tools. Nanoparticles are selective in nature, have reduced toxicity, and controllable drug release patterns making them ideal carriers for anticancer drugs. Numerous nanocarriers have been designed to combat malignancies, including liposomes, micelles, dendrimers, solid nanoparticles, quantum dots, gold nanoparticles, and, more recently, metal-organic frameworks. The temporal and spatial release of therapeutic agents from these nanostructures can be controlled using internal and external triggers, including pH, enzymes, redox, temperature, magnetic and electromagnetic waves, and ultrasound. Ultrasound is an attractive modality because it is non-invasive, can be focused on the diseased site, and has a synergistic effect with anticancer drugs.

CONCLUSION

The functionalization of micellar and liposomal surfaces with targeting moieties and the use of ultrasound as a triggering mechanism can help improve the selectivity and enable the spatiotemporal control of drug release from nanocarriers.

Ultrasmall Nanocapsules Obtained by Controlling Ostwald Ripening

We describe here a method to synthesize ultrasmall nanocapsules with a diameter of 6 nm, exhibiting a well-defined core-shell morphology. Remarkably, the nanocapules are synthesized in a miniemulsion process without the need of large amounts of surfactant as commonly used in the microemulsion process. Ultrasmall nanocapsules with an oil core and a silica shell are formed by the concurrent processes of a sol-gel reaction and Ostwald ripening. Using solvents with different water solubilities and alkoxysilanes with different reactivities, we demonstrate that sizes of obtained nanocapsules depend on the ripening rate and alkoxysilane conversion rate. The method can be also used for encapsulating natural oils such as peppermint oil and limonene. This work shows that the Ostwald ripening phenomenon can be employed beneficially for the preparation of very small colloids.

Stimuli-responsive nanoparticles based on poly acrylic derivatives for tumor therapy

Serve side effects caused by discriminate damage of chemotherapeutic drugs to normal cell and cancer cells remain a main obstacle in clinic. Hence, continuous efforts have been made to find ways to effectively enhance drug delivery and reduce side effects. Recent decades have witnessed impressive progresses in fighting against cancer, with improved understanding of tumor microenvironment and rapid development in nanoscale drug delivery system (DDS). Nanocarriers based on biocompatible materials provide possibilities to improve antitumor efficiency and minimize off-target effects. Among all kinds of biocompatible materials applied in DDS, polymeric acrylic derivatives such as poly(acrylamide), poly(acrylic acid), poly(N-isopropylacrylamide) present inherent biocompatibility and stimuli-responsivity, and relatively easy to be functionalized. Furthermore, nanocarrier based on polymeric acrylic derivatives have demonstrated high drug encapsulation, improved uptake efficiency, prolonged circulation time and satisfactory therapeutic outcome in tumor. In this review, we aim to discuss recent progress in design and development of stimulus-responsive poly acrylic polymer based nanocarriers for tumor targeting drug delivery.

Factors affecting pluronic-coated iron oxide nanoparticle binding to petroleum hydrocarbon-impacted sediments

Effective targeted delivery of nanoparticle agents may enhance the remediation of soils and site characterization efforts. Nanoparticles coated with Pluronic, an amphiphilic block co-polymer, demonstrated targeted binding behaviour toward light non-aqueous phase liquids such as heavy crude oil. Various factors including coating concentration, oil concentration, oil type, temperature, and pH were assessed to determine their effect on nanoparticle binding to heavy crude oil-impacted sandy aquifer material. Nanoparticle binding was increased by decreasing the coating concentration, increasing oil concentration, using heavier oil types, and increasing temperature, while pH over the range of 5-9 was found to have no effect. Nanoparticle transport and binding in columns packed with clean and oily porous media demonstrated the ability for efficient nanoparticle targeted binding. For the conditions explored, the attachment rate coefficient in columns packed with clean sand was 2.10 ± 0.66 × 10^-4 s^-1; however, for columns packed with oil-impacted sand a minimum attachment rate coefficient of 8.86 ± 0.43 × 10^-4 s^-1 was estimated. The higher attachment rate for the oil-impacted sand system indicates that nanoparticles may preferentially accumulate to oil-impacted zones present at heterogeneous impacted sites. Simulations were used to demonstrate this hypothesis using the set of parameters generated in this effort. This work contributes to our understanding of the application conditions that are required for efficient targeted binding of nanoparticles to crude-oil impacted porous media.

Facile methodology of nanoemulsion preparation using oily polymer for the delivery of poorly soluble drugs

Aqueous solubility of an active pharmaceutical ingredient (API) is a determining factor that has a direct impact on formulation strategies and overall bioavailability. Fabrication of nanoemulsions of poorly soluble drugs is one of the widely utilized approaches to overcome this problem. However, thermodynamic instability and tedious manufacturing processes of nanoemulsions limit their clinical translation. Therefore, this study was focused on circumventing the abovementioned hurdles by utilizing the polymer as an oil phase, instead of conventional oils. The nanoemulsion was prepared via a facile low-energy nanoprecipitation method using renewable poly(δ-decalactone) (PDL), as an oil phase and Pluronic F-68 as surfactant. The prepared nanoemulsions were characterized in terms of size, drug encapsulation efficiency, stability, and toxicity. Five different hydrophobic drugs were utilized to evaluate the drug delivery capability of the PDL nanoemulsion. The prepared nanoemulsions with sizes less than 200 nm were capable to enhance the aqueous solubility of the drugs by 3 to 10 times compared with the well-established Pluronic F-68 micelles. No phase separation or significant changes in size and drug content was observed with PDL nanoemulsions after high-speed centrifugation and 3 months of storage at two different temperatures (20 °C and 50 °C). PDL nanoemulsions were found to be non-heamolytic up to concentrations of 1 mg/mL, and the cell cytotoxicity studies on MDA-MB-231 and MEF cells suggest a concentration and time-dependent toxicity, where the PDL polymer itself induced no cytotoxicity. The results from this study clearly indicate that the PDL polymer has a tremendous potential to be utilized as an oil phase to prepare stable nanoemulsions via a facile methodology, ultimately favouring clinical translations.

Graphical abstract

Synthesis of Prolate-Shaped Au Nanoparticles and Au Nanoprisms and Study of Catalytic Reduction Reactions of 4-Nitrophenol

The growth into anisotropic one or two dimensions is important in plasmonic gold nanomaterials because extinction occurs along multiple axes and sometimes the resonance extends to the near-infrared region. The surfactant mixture of cetyltrimethylammonium bromide (CTAB) and Pluronic triblock copolymers has been recently demonstrated to be efficient anisotropic soft templates for the growth of noble metal nanomaterials. Seed-mediated growth of two types of anisotropic Au nanoparticles is achieved in this study. One is one-dimensional prolate-shaped Au nanoparticles with the average aspect ratios of 2.29 and 2.59, and the other is two-dimensional gold nanoprisms with the average edge length of 50.4 nm. These anisotropic structures are believed to be produced by the tendency of Pluronic copolymers to be micellized anisotropically at the elevated temperatures and by the preference for being lamellar mesophases in the phase diagrams when the concentration is highest. When prepared in the surfactant mixture of CTAB and L-64 (17.9%), Au nanoparticles containing spherical particles (27.9 nm) as the major products show the best catalytic performances in the reduction reactions of 4-nitrophenol.

Advancements and Challenges in Multidomain Multicargo Delivery Vehicles

Reparative and regenerative processes are well-orchestrated temporal and spatial events that are governed by multiple cells, molecules, signaling pathways, and interactions thereof. Yet again, currently available implantable devices fail largely to recapitulate nature's complexity and sophistication in this regard. Herein, success stories and challenges in the field of layer-by-layer, composite, self-assembly, and core-shell technologies are discussed for the development of multidomain/multicargo delivery vehicles.

3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances

3D printing, an additive manufacturing based technology for precise 3D construction, is currently widely employed to enhance applicability and function of cell laden scaffolds. Research on novel compatible biomaterials for bioprinting exhibiting fast crosslinking properties is an essential prerequisite toward advancing 3D printing applications in tissue engineering. Printability to improve fabrication process and cell encapsulation are two of the main factors to be considered in development of 3D bioprinting. Other important factors include but are not limited to printing fidelity, stability, crosslinking time, biocompatibility, cell encapsulation and proliferation, shear-thinning properties, and mechanical properties such as mechanical strength and elasticity. In this review, we recite recent promising advances in bioink development as well as bioprinting methods. Also, an effort has been made to include studies with diverse types of crosslinking methods such as photo, chemical and ultraviolet (UV). We also propose the challenges and future outlook of 3D bioprinting application in medical sciences and discuss the high performance bioinks.

•

The most recent promising advances in three-dimensional bioprinting are reviewed.

•

Extrusion, inkjet, stereolithography, and laser bioprinting studies are cited.

•

Challenges toward successful employment of bioprinting are discussed.

Sodium deoxycholate mediated enhanced solubilization and stability of hydrophobic drug Clozapine in pluronic micelles

In this report, the solubilization behaviour of a hydrophobic drug Clozapine (CLZ) in micellar suspensions of pluronics having different hydrophilic lipophilic balance (HLB) ratios viz. P84, F127 and F108 in the absence and presence of bile salt sodium deoxycholate (SDC) has been studied. UV-Vis spectroscopy has been exploited to determine the solubilization capacity of the investigated micellar systems in terms of drug loading efficiency, average number of drug molecules solubilized per micelle (n_s), partition coefficient (P) and standard free energy of solubilization (∆G^°). The morphological and structural changes taking place in pluronics in different concentration regimes of SDC and with the addition of drug CLZ has been explored using dynamic light scattering (DLS) and small angle neutron scattering (SANS) measurements. The SANS results revealed that aggregation behaviour of pluronic-SDC mixed micelles gets improved in the presence of drug. The micropolarity measurements have been performed to shed light on the locus of solubilization of the drug in pure and mixed micellar systems. The compatibility between CLZ and drug carriers (pluronics and SDC) was confirmed using powder X-ray diffraction (PXRD) and Fourier transform infrared spectroscopy (FTIR) techniques. Among the investigated systems, P84-SDC mixed system was found to be highly efficient for CLZ loading. The long term stability data indicated that CLZ loaded P84-SDC mixed micellar formulation remained stable for 3months at room temperature. Further, it was revealed that the CLZ loaded P84-SDC mixed micelles are converted into CLZ loaded pure P84 micelles at 30-fold dilutions which remain stable up to 48-fold dilutions. The results from the present studies suggest that P84-SDC mixed micelles can serve as suitable delivery vehicles for hydrophobic drug CLZ.

Temperature and ultrasound sensitive gatekeepers for the controlled release of chemotherapeutic drugs from mesoporous silica nanoparticles

The copolymer chains were grafted onto the mesopores of silica nanoparticles and could act as stimuli responsive ‘smart’ gatekeepers. With the aid of a transdermal delivery route and ultrasound penetration, even malignant sites of internal organs can be set as targets.

Facile fabrication of Sudan red particle microcapsules by a polymerizable gemini surfactant and molecular assembly mechanisms

An efficient method was developed to encapsulate water insoluble organic particles of Sudan red III (SR) in aqueous suspensions by using a polymerizable cationic gemini surfactant, 1,3-bis(N,N-dimethyl-N-cetylammonium)-2-(propylacrylate dibromide) (AGC₁₆). The AGC₁₆ coated SR microcapsules (AGC₁₆@SR) were prepared by absorption of AGC₁₆ on the surface of SR, followed by in situ homopolymerization (PAGC₁₆). Several measurements, including transmission and scanning electron microscopy, isothermal titration calorimetry, zeta potential, electron paramagnetic resonance and small angle X-ray scattering, were performed to determine the adsorption amount of AGC₁₆, and the layer structures and the molecular assembly mechanism in the AGC₁₆@SR and PAGC₁₆@SR systems, respectively. For comparison purposes, the polymerizable cationic surfactant with one head group and a single alkyl chain, acryloyloxyethyl-N,N-dimethyl-N-cetylammonium bromide (referred to as ASC₁₆), as well as the systems of ASC₁₆@SR and PASC₁₆@SR were also investigated in parallel. It was found that AGC₁₆ molecules and their aggregates were simultaneously assembled into a shell layer, in which the saturated adsorption amount of AGC₁₆ on SR is less than 1/2 that of ASC₁₆, but the assembly layer of AGC₁₆ is more hydrophobic with greater packing tightness compared with that of ASC₁₆. It was also revealed that after in situ homopolymerization, the microcapsule shell becomes more compact. In the case of PAGC₁₆@SR, the layers show higher surface roughness and irregularity compared with that of PASC₁₆@SR. Moreover, the sustained release behavior of SR was also evaluated. The results revealed that PAGC₁₆@SR performed well for SR controlled release, which was sorted by release performance as the following sequence: PAGC₁₆@SR > AGC₁₆@SR > PASC₁₆@SR > ASC₁₆@SR. Thus, the polymerizable cationic gemini surfactant holds substantial potential to be developed as an ideal candidate of soft matter to construct efficient controllable release systems.

Polymeric micelles for ocular drug delivery: From structural frameworks to recent preclinical studies

Effective intraocular drug delivery poses a major challenge due to the presence of various elimination mechanisms and physiological barriers that result in low ocular bioavailability after topical application. Over the past decades, polymeric micelles have emerged as one of the most promising drug delivery platforms for the management of ocular diseases affecting the anterior (dry eye syndrome) and posterior (age-related macular degeneration, diabetic retinopathy and glaucoma) segments of the eye. Promising preclinical efficacy results from both in-vitro and in-vivo animal studies have led to their steady progression through clinical trials. The mucoadhesive nature of these polymeric micelles results in enhanced contact with the ocular surface while their small size allows better tissue penetration. Most importantly, being highly water soluble, these polymeric micelles generate clear aqueous solutions which allows easy application in the form of eye drops without any vision interference. Enhanced stability, larger cargo capacity, non-toxicity, ease of surface modification and controlled drug release are additional advantages with polymeric micelles. Finally, simple and cost effective fabrication techniques render their industrial acceptance relatively high. This review summarizes structural frameworks, methods of preparation, physicochemical properties, patented inventions and recent advances of these micelles as effective carriers for ocular drug delivery highlighting their performance in preclinical studies.

Paclitaxel-loaded pluronic F127/P123 silica nanocapsules with surface conjugated rhTRAIL for targeted cancer therapy

A novel anticancer drug PFPSNT, paclitaxel (PTX)-loaded polymeric F127/P123 silica nanocapsules conjugated with TRAIL (tumor necrosis factor (TNF)-related apoptosis-inducing ligand), was designed and synthesized.

Hydrogen-bonded polymer complexes and nanocages of weak polyacids templated by a Pluronic® block copolymer

We investigate the phase behavior, morphology, and temperature response of hydrogen-bonded assemblies formed by a triblock copolymer Pluronic® F127 (F127) and polycarboxylic acids of varied hydrophobicity and chain lengths. As confirmed by FTIR, the complexes of poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA) with F127 at acidic pH were stabilized by multiple hydrogen bonding between carboxylic acid groups of polyacids and ether groups of F127. The colloidal stability of the polyacid/F127 complexes (their occurrence as stable dispersions, slowly coagulating dispersions or precipitates) was dependent on the composition of complexes, polyacid molecular weight and hydrophobicity, as well as temperature. For both polyacids, complexes could not be solubilized in excess of polyacids, but excess of F127 resulted in the formation of colloidally stable nanostructured clusters whose size could be controlled from tens to hundreds of nanometers by the polyacid-to-F127 ratio, temperature, and the polyacid molecular weight. Hydrophobicity of polyacids had a dramatic effect on the temperature response of Pluronic®-enriched assemblies. While PMAA suppressed the LCST behavior of F127 due to binding within the temperature-responsive PPO core of F127, more hydrophilic PAA allowed F127 micellization and supported reversible, temperature-induced re-structuring of PAA-F127 clusters. At temperatures above the LCST of Pluronic®, low-molecular-weight PAA formed nanosized dispersed complexes, in which the polyacid chains were wrapped around individual F127 micelles. Chemical crosslinking of PAA in the shells of these complexes followed by removal of the templating F127 cores resulted in easy-to-prepare monodisperse pH-responsive polymer nanocages with controllable size and swelling amplitude.

Surface and Aggregation Behavior of Pentablock Copolymer PNIPAM7-F127-PNIPAM7 in Aqueous Solutions

The triblock Pluronic F127 was modified by introducing poly(N-isopropylacrylamide) (PNIPAM) at both the poly(ethylene oxide) ends, and the pentablock copolymer so-prepared was characterized by gel permeation chromatography and (1)H NMR. The degree of polymerization of NIPAM blocks at the two ends was 7. The solution behavior and microstructure of copolymer aggregates in water and aqueous salt solution were examined and compared with F127 by UV-visible absorption spectroscopy, microdifferential scanning calorimetry, dynamic light scattering (DLS), and small-angle neutron scattering (SANS). The behavior of the pentablock copolymer at the air/water interface was determined by Langmuir film balance. Two lower critical solution temperatures were observed for pentablock copolymer, corresponding to poly(propylene oxide) and PNIPAM blocks, respectively. DLS studies show that micelle size increased with increase in temperature and in the presence of salt. SANS measurements provided temperature-dependent structural evolution of copolymer micelles in water and salt solution. The copolymer displays an isotherm with four classical regions (pancake, mushroom, brush, and condensed state). The study has potential applications in controlled drug delivery due to the tunable phase behavior and biocompatibility of the copolymer.

Perspectives on: PEO-PPO-PEO Triblock Copolymers and their Biomedical Applications

Thermo-reversible polymeric gels represent an interesting class of materials that can be tailored for a wide range of applications. The triblock poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) based systems, PEO-PPO-PEO, show thermoreversible gelation around body temperature and, therefore, are particularly suitable for biomedical applications such as drug delivery, gene therapy and tissue engineering. The PEO-PPO-PEO tri-block copolymers have amphiphilic characteristics and self-assemble into micelles to form a variety of close packed structures. By varying the block composition (PEO/PPO ratio) and the molecular weight, it is possible to tailor the final properties of these systems to meet the specific application needs. In this report the thermodynamic basis of micellization of PEO-PPO-PEO systems is described. The factors influencing the micelles formation are discussed along with the methods used to investigate the micellization process and morphology as well as with the main applications of these systems in biomedical fields.

Complex Formation Between Lysozyme and Stabilized Micelles with a Mixed Poly(ethylene oxide)/Poly(acrylic acid) Shell

The electrostatic complexation between lysozyme and stabilized polymeric micelles (SPMs) with a poly(acrylic acid) (PAA) or a mixed poly(ethylene oxide)/poly(acrylic acid) (PEO/PAA) shell (SPMs with a mixed shell, SPMMS) and a temperature-responsive poly(propylene oxide) (PPO) core was investigated by means of dynamic, static, and electrophoretic light scattering. The SPMs and different types of SPMMS used resulted from the self-assembly of PAA-PPO-PAA triblock copolymer chains, or PAA-PPO-PAA and PEO-PPO-PEO triblock copolymer chain mixtures (with varying chain lengths and molar ratios) in aqueous solutions at pH 10 and the subsequent cross-linking of their PPO cores via loading and photo-cross-linking of pentaerythritol tetraacrylate (PETA). The solution behavior, structure and properties of the formed complexes at pH 7 and 0.01 M ionic strength, were studied as a function of the protein concentration in the solution (the concentration of the stabilized micelles was kept constant) or equivalently the ratio of the two components. The complexation process and properties of the complexes proved to be dependent on the protein concentration, while of particular interest was the effect of the structure of the shell of the SPMs on the stability/solubility of the complexes. Finally, the fluorescence and mid infrared spectroscopic investigation of the structure of the complexed protein showed that, although a small stretching of the protein molecules occurred in some cases, no protein denaturation takes place upon complexation.

Photostable far-red emitting pluronic silicate nanoparticles: perfect blood pool fluorophores for biphotonic in vivo imaging of the leaky tumour vasculature

A new non-diffusible fluorescent probe for two photon microscopy, comprising a hydrophobic push-pull dye in the apolar core of Pluronic F127–silica nanoparticles, shows intense red emission (Φ_f 39% at 650 nm) and two-photon absorption properties in the NIR.

Intracellular Doxorubicin Delivery of a Core Cross-linked, Redox-responsive Polymeric Micelles

Redox-responsive micelles based on amphiphilic polyethylene glycol-polymethyl methacrylate with the introduction of disulfide containing cross-linked agent (mPEG-PMMA-SS) were developed for intracellular drug release. Benefiting from the amphiphilicity, mPEG-PMMA-SS could self-assembled into core cross-linked micelles in aqueous medium with tunable sizes (85-151 nm), appropriate zeta potential (-24.8 mV), and desirable critical micelle concentration (CMC) (0.18 mg/mL). Doxorubicin (DOX) could efficiently load into the micelles with satisfactory entrapment efficiency. As expected, the in vitro release studies displayed that DOX release from mPEG-PMMA-SS micelles was about 75% within 10h under tumor-relevant reductive condition, whereas only about 25% DOX was released in non-reductive medium. SRB assays indicated that these mPEG-PMMA-SS micelles were biocompatible and nontoxic up to a concentration of 50 μg/mL. The cytotoxicity studies and the intracellular drug delivery demonstrated that the drug release behavior in cells was related to the concentration of GSH in cytoplasm. Furthermore, the cell experiments using fluorescence microscopy showed clearly that DOX was delivered by micelles to the cytoplasm, released in cytoplasm under reductive environment, and then accumulated in cell nucleus. These results suggest that such redox-responsive micelles may develop into an efficient cytoplasmic delivery for hydrophobic anticancer drugs.

Polymeric micelles and nanoemulsions as drug carriers: Therapeutic efficacy, toxicity, and drug resistance

The manuscript reports the side-by-side comparison of therapeutic properties of polymeric micelles and nanoemulsions generated from micelles. The effect of the structure of a hydrophobic block of block copolymer on the therapeutic efficacy, tumor recurrence, and development of drug resistance was studied in pancreatic tumor bearing mice. Mice were treated with paclitaxel (PTX) loaded poly(ethylene oxide)-co-polylactide micelles or corresponding perfluorocarbon nanoemulsions. Two structures of the polylactide block differing in a physical state of micelle cores or corresponding nanodroplet shells were compared. Poly(ethylene oxide)-co-poly(d,l-lactide) (PEG-PDLA) formed micelles with elastic amorphous cores while poly(ethylene oxide)-co-poly(l-lactide) (PEG-PLLA) formed micelles with solid crystalline cores. Micelles and nanoemulsions stabilized with PEG-PDLA copolymer manifested higher therapeutic efficacy than those formed with PEG-PLLA copolymer studied earlier. Better performance of PEG-PDLA micelles and nanodroplets was attributed to the elastic physical state of micelle cores (or droplet shells) allowing adequate rate of drug release via drug diffusion and/or copolymer biodegradation. The biodegradation of PEG-PDLA stabilized nanoemulsions was monitored by the ultrasonography of nanodroplets injected directly into the tumor; the PEG-PDLA stabilized nanodroplets disappeared from the injection site within 48h. In contrast, nanodroplets stabilized with PEG-PLLA copolymer were preserved at the injection site for weeks and months indicating extremely slow biodegradation of solid PLLA blocks. Multiple injections of PTX-loaded PEG-PDLA micelles or nanoemulsions to pancreatic tumor bearing mice resulted in complete tumor resolution. Two of ten tumors treated with either PEG-PDLA micellar or nanoemulsion formulation recurred after the completion of treatment but proved sensitive to the second treatment cycle indicating that drug resistance has not been developed. This is in contrast to the treatment with PEG-PLLA micelles or nanoemulsions where all resolved tumors quickly recurred after the completion of treatment and proved resistant to the repeated treatment. The prevention of drug resistance in tumors treated with PEG-PDLA stabilized formulations was attributed to the presence and preventive effect of copolymer unimers that were in equilibrium with PEG-PDLA micelles. PEG-PDLA stabilized nanoemulsions manifested lower hematological toxicity than corresponding micelles suggesting higher drug retention in circulation. Summarizing, micelles with elastic cores appear preferable to those with solid cores as drug carriers. Micelles with elastic cores and corresponding nanoemulsions both manifest high therapeutic efficacy, with nanoemulsions exerting lower systemic toxicity than micelles. The presence of a small fraction of micelles with elastic cores in nanoemulsion formulations is desirable for prevention of the development of drug resistance.

Polymeric micelles and nanoemulsions as tumor-targeted drug carriers: Insight through intravital imaging

Intravital imaging of nanoparticle extravasation and tumor accumulation has revealed, for the first time, detailed features of carrier and drug behavior in circulation and tissue that suggest new directions for optimization of drug nanocarriers. Using intravital fluorescent microscopy, the extent of the extravasation, diffusion in the tissue, internalization by tissue cells, and uptake by the RES system were studied for polymeric micelles, nanoemulsions, and nanoemulsion-encapsulated drug. Discrimination of vascular and tissue compartments in the processes of micelle and nanodroplet extravasation and tissue accumulation was possible. A simple 1-D continuum model was suggested that allowed discriminating between various kinetic regimes of nanocarrier (or released drug) internalization in tumors of various sizes and cell density. The extravasation and tumor cell internalization occurred much faster for polymeric micelles than for nanoemulsion droplets. Fast micelle internalization resulted in the formation of a perivascular fluorescent coating around blood vessels. A new mechanism of micelle extravasation and internalization was suggested, based on the fast extravasation and internalization rates of copolymer unimers while maintaining micelle/unimer equilibrium in the circulation. The data suggested that to be therapeutically effective, nanoparticles with high internalization rate should manifest fast diffusion in the tumor tissue in order to avoid generation of concentration gradients that induce drug resistance. However an extra-fast diffusion should be avoided as it may result in the flow of extravasated nanoparticles from the tumor to normal organs, which would compromise targeting efficiency. The extravasation kinetics were different for nanodroplets and nanodroplet-encapsulated drug F-PTX suggesting a premature release of some fraction of the drug from the carrier. In conclusion, the development of an "ideal" drug carrier should involve the optimization of both drug retention and carrier diffusion parameters.

Thermoresponsive block copolymer micelles with tunable pyrrolidone-based polymer cores: structure/property correlations and application as drug carriers

Residue structure affects the physicochemical properties, drug loading efficiency, and thermoresponsive drug release profiles of block copolymer micelles with pyrrolidone-based polymer cores.

State-of-the-art materials for ultrasound-triggered drug delivery

Ultrasound is a unique and exciting theranostic modality that can be used to track drug carriers, trigger drug release and improve drug deposition with high spatial precision. In this review, we briefly describe the mechanisms of interaction between drug carriers and ultrasound waves, including cavitation, streaming and hyperthermia, and how those interactions can promote drug release and tissue uptake. We then discuss the rational design of some state-of-the-art materials for ultrasound-triggered drug delivery and review recent progress for each drug carrier, focusing on the delivery of chemotherapeutic agents such as doxorubicin. These materials include nanocarrier formulations, such as liposomes and micelles, designed specifically for ultrasound-triggered drug release, as well as microbubbles, microbubble-nanocarrier hybrids, microbubble-seeded hydrogels and phase-change agents.

Ultrasound-triggered Release from Micelles

Ultrasound is an ideal trigger for site-actuated drug delivery because it can be focused through the skin to internal targets without surgery. Thermal or mechanical energy can be delivered via tissue heating or bubble cavitation, respectively. Bubble cavitation, which concentrates energy that can trigger drug release from carriers, occurs more readily at low frequencies and at bubble resonant frequencies. Other mechanical and physical consequences of cavitation are reviewed. Micelles are nanosized molecular assemblies of amphiphilic molecules that spontaneously form in aqueous solution and possess a hydrophobic core capable of sequestering hydrophobic drugs. Micelles have traditionally been used to increase the solubility of hydrophobic therapeutics for oral and intravenous administration. For ultrasonic drug delivery, polymeric micelles containing polyethylene oxide blocks are preferred because they have longer circulation time in vivo. Passive delivery occurs when micelles accumulate in tumor tissues that have malformed capillaries with porous walls. In active delivery targeting ligands are attached to the micelles, which directs their binding to specific cells. Actuated delivery occurs when ultrasound causes drug release from micelles and is attributed to bubble cavitation since the amount released correlates with acoustic signatures of cavitation. The mechanisms of ultrasonic drug release are discussed, including the prevalent theory that gas bubble cavitation events create high shear stress and shock waves that transiently perturb the structure of the micelles and allow drug to escape from the hydrophobic core. Ultrasound also perturbs cell membranes, rendering them more permeable to drug uptake. Tumors in rats and mice have been successfully treated using low-frequency ultrasound and chemotherapeutics in polymeric micelles. Ultrasonically activated drug delivery has great clinical potential.

Temperature- and pH-sensitive Polymeric Micelles for Drug Encapsulation, Release and Targeting

More than 50% of the drugs in the market and 70% of the new candidates are poorly water soluble according to the Biopharmaceutic Classification System (BCS(. Poor aqueous solubility and physico-chemical stability of drugs in biological fluids remain key limitations in oral, parenteral and transdermal administration and contribute to an increase the drug attrition rate. Motivated by the outbreak of nanotechnology, different nanocarriers made of lipids and polymers have been designed and developed to address these limitations. Moreover, robust platforms were exploited to achieve the temporal and spatial release of drugs, thus constraining the systemic exposure to toxic agents and the appearance of severe adverse effects and improving the safety ratio. Owing to unique features such as (i( great chemical flexibility, (ii( capacity to host, solubilize and physico-chemically stabilize poorly water soluble drugs, (iii( ability to accumulate selectively in highly vascularized solid tumors and (iv( ability of single amphiphile molecules (unimers( to inhibit the activity of different pumps of the ATP-binding cassette superfamily (ABCs(, polymeric micelles have emerged as one of the most versatile nanotechnologies. Despite their diverse applications to improve the therapeutic outcomes, polymeric micelles remain clinically uncapitalized. The present chapter overviews the most recent applications of temperature- and pH-responsive polymeric micelles for the encapsulation, release and targeting of drugs and discusses the perspectives for these unique nanocarriers in the near future.