The crystal structure of a triacylglycerol lipase from Pseudomonas cepacia reveals a highly open conformation in the absence of a bound inhibitor

Substrate specificity of commercial lipases activated by a hydration-aggregation pretreatment in anhydrous esterification reactions

Substrate specificity in non-aqueous esterification catalyzed by commercial lipases activated by hydration-aggregation pretreatment was investigated. Four microbial lipases from Rhizopus japonicus, Burkholderia cepacia, Rhizomucor miehei, and Candida antarctica (fraction B) were used to study the effect of the carbon chain length of saturated fatty acid substrates on the esterification activity with methanol in n-hexane. Hydration-aggregation pretreatment had an activation effect on all lipases used, and different chain length dependencies of esterification activity for lipases from different origins were demonstrated. The effects of various acidic substrates with different degrees of unsaturation, aromatic rings, and alcohol substrates with different carbon chain lengths on esterification activity were examined using R. japonicus lipase, which demonstrated the most remarkable activity enhancement after hydration-aggregation pretreatment. Furthermore, in the esterification of myristic acid with methanol catalyzed by the hydrated-aggregated R. japonicus lipase, maximum reaction rate (5.43 × 10-5 mmol/(mg-biocat min)) and Michaelis constants for each substrate (48.5 mM for myristic acid, 24.7 mM for methanol) were determined by kinetic analysis based on the two-substrate Michaelis-Menten model.

Structures of BlEst2 from Bacillus licheniformis in its propeptide and mature forms reveal autoinhibitory effects of the C-terminal domain

Carboxylesterases comprise a major class of α/β-fold hydrolases responsible for the cleavage and formation of ester bonds. Found ubiquitously in nature, these enzymes are crucial for the metabolism of both endogenous and exogenous carboxyl esters in animals, plants and microorganisms. Beyond their essential physiological roles, carboxylesterases stand out as one of the important classes of biocatalysts for biotechnology. BlEst2, an enzyme previously classified as Bacillus licheniformis esterase, remains largely uncharacterized. In the present study, we elucidate the structural biology, molecular dynamics and biochemical features of BlEst2. Our findings reveal a canonical α/β-hydrolase fold similar to the ESTHER block L of lipases, further augmented by two additional accessory C-terminal domains. Notably, the catalytic domain demonstrates two insertions, which occupy conserved locations in α/β-hydrolase proteins and commonly form the lid domain in lipase structures. Intriguingly, our in vitro cleavage of C-terminal domains revealed the structure of the active form of BlEst2. Upon activation, BlEst2 showed a markedly elevated hydrolytic activity. This observation implies that the intramolecular C-terminal domain serves as a regulatory intramolecular inhibitor. Interestingly, despite exhibiting esterase-like activity, BlEst2 structural characteristics align more closely with lipases. This suggests that BlEst2 could potentially represent a previously unrecognized subgroup within the realm of carboxyl ester hydrolases.

An Alternative Approach to Plastic Recycling: Fabrication and Characterization of rPET/CA Nanofiber Carriers to Enhance Porcine Pancreatic Lipase Stability Properties

In response to the increasing demand for sustainable technologies, this study presents a novel approach to plastic recycling. In this study, a method was presented to produce nanofiber carriers by electrospinning using recycled poly(ethylene terephthalate) (rPET) obtained from wastewater bottles and cellulose acetate (CA). These carriers serve as a platform for immobilized porcine pancreatic lipase (PPL), aiming to enhance its stability. The production parameters for the rPET/CA nanofibers were found to be an rPET concentration of 15% (v/v), a CA concentration of 6% (v/v), an electrical voltage of 13 kV, a needle-collector distance of 18 cm, and an injection speed of 0.1 mL/h. The nanofiber structure and morphology were assessed by using attenuated total reflectance-infrared Fourier transform infrared (ATR-FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) analyses. Then, PPL was immobilized onto the nanofibers through adsorption and cross-linking methods. The optimum temperature for free PPL was determined to be 30 °C, and the optimum temperature for PPL immobilized on rPET/CA was determined to be 40 °C. It was observed that, especially under acidic conditions, after the immobilization process, PPL immobilized rPET/CA nanofibers became more resistant to pH changes than free PLL. Furthermore, the immobilized PPL exhibited improved pH stability, reusability, and thermal stability compared to its free counterpart. This innovative approach not only contributes to plastic waste reduction but also opens new avenues for enzyme immobilization with potential applications in biocatalysis and wastewater treatment.

Enhanced Enzymatic Performance of Immobilized Pseudomonas fluorescens Lipase on ZIF-8@ZIF-67 and Its Application to the Synthesis of Neryl Acetate with Transesterification Reaction

In this study, hybrid skeleton material ZIF-8@ZIF-67 was synthesized by the epitaxial growth method and then was utilized as a carrier for encapsulating Pseudomonas fluorescens lipase (PFL) through the co-precipitation method, resulting in the preparation of immobilized lipase (PFL@ZIF-8@ZIF-67). Subsequently, it was further treated with glutaraldehyde to improve protein immobilization yield. Under optimal immobilization conditions, the specific hydrolytic activity of PFL@ZIF-8@ZIF-67 was 20.4 times higher than that of the free PFL. The prepared biocatalyst was characterized and analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR). Additionally, the thermal stability of PFL@ZIF-8@ZIF-67 at 50 °C was significantly improved compared to the free PFL. After 7 weeks at room temperature, PFL@ZIF-8@ZIF-67 retained 78% of the transesterification activity, while the free enzyme was only 29%. Finally, PFL@ZIF-8@ZIF-67 was applied to the neryl acetate preparation in a solvent-free system, and the yield of neryl acetate reached 99% after 3 h of reaction. After 10 repetitions, the yields of neryl acetate catalyzed by PFL@ZIF-8@ZIF-67 and the free PFL were 80% and 43%, respectively.

Experimental and Computational Analysis of Synthesis Conditions of Hybrid Nanoflowers for Lipase Immobilization

This work presents a framework for evaluating hybrid nanoflowers using Burkholderia cepacia lipase. It was expanded on previous findings by testing lipase hybrid nanoflowers (hNF-lipase) formation over a wide range of pH values (5-9) and buffer concentrations (10-100 mM). The free enzyme activity was compared with that of hNF-lipase. The analysis, performed by molecular docking, described the effect of lipase interaction with copper ions. The morphological characterization of hNF-lipase was performed using scanning electron microscopy. Fourier Transform Infrared Spectroscopy performed the physical-chemical characterization. The results show that all hNF-lipase activity presented values higher than that of the free enzyme. Activity is higher at pH 7.4 and has the highest buffer concentration of 100 mM. Molecular docking analysis has been used to understand the effect of enzyme protonation on hNF-lipase formation and identify the main the main binding sites of the enzyme with copper ions. The hNF-lipase nanostructures show the shape of flowers in their micrographs from pH 6 to 8. The spectra of the nanoflowers present peaks typical of the amide regions I and II, current in lipase, and areas with P-O vibrations, confirming the presence of the phosphate group. Therefore, hNF-lipase is an efficient biocatalyst with increased catalytic activity, good nanostructure formation, and improved stability.

Lipase A from Bacillus subtilis: Substrate Binding, Conformational Dynamics, and Signatures of a Lid

Protein-ligand binding studies are crucial for understanding the molecular basis of biological processes and for further advancing industrial biocatalysis and drug discovery. Using computational modeling and molecular dynamics simulations, we investigated the binding of a butyrate ester substrate to the lipase A (LipA) enzyme of Bacillus subtilis. Besides obtaining a close agreement of the binding free energy with the experimental value, the study reveals a remarkable reorganization of the catalytic triad upon substrate binding, leading to increased essential hydrogen bond populations. The investigation shows the distortion of the oxyanion hole in both the substrate-bound and unbound states of LipA and highlights the strengthening of the same in the tetrahedral intermediate complex. Principal component analysis of the unbound ensemble reveals the dominant motion in LipA to be the movement of Loop-1 (Tyr129-Arg142) between two states that cover and uncover the active site, mirroring that of a lid prevalent in several lipases. This lid-like motion of Loop-1 is also supported by its tendency to spontaneously open up at an oil-water interface. Overall, this study provides valuable insights into the impact of substrate binding on the structure, flexibility, and conformational dynamics of the LipA enzyme.

Biocatalytic production of biolubricants: Strategies, problems and future trends

The increasing worries by the inadequate use of energy and the preservation of nature are promoting an increasing interest in the production of biolubricants. After discussing the necessity of producing biolubricants, this review focuses on the production of these interesting molecules through the use of lipases, discussing the different possibilities (esterification of free fatty acids, hydroesterification or transesterification of oils and fats, transesterification of biodiesel with more adequate alcohols, estolides production, modification of fatty acids). The utilization of discarded substrates has special interest due to the double positive ecological impact (e.g., oil distillated, overused oils). Pros and cons of all these possibilities, together with general considerations to optimize the different processes will be outlined. Some possibilities to overcome some of the problems detected in the production of these interesting compounds will be also discussed.

Enhanced Bioactivity of Enzyme/MOF Biocomposite via Host Framework Engineering

This study reports the successful development of a sustainable synthesis protocol for a phase-pure metal azolate framework (MAF-6) and its application in enzyme immobilization. An esterase@MAF-6 biocomposite was synthesized, and its catalytic performance was compared with that of esterase@ZIF-8 and esterase@ZIF-90 in transesterification reactions. Esterase@MAF-6, with its large pore aperture, showed superior enzymatic performance compared to esterase@ZIF-8 and esterase@ZIF-90 in catalyzing transesterification reactions using both n-propanol and benzyl alcohol as reactants. The hydrophobic nature of the MAF-6 platform was shown to activate the immobilized esterase into its open-lid conformation, which exhibited a 1.5- and 4-times enzymatic activity as compared to free esterase in catalyzing transesterification reaction using n-propanol and benzyl alcohol, respectively. The present work offers insights into the potential of MAF-6 as a promising matrix for enzyme immobilization and highlights the need to explore MOF matrices with expanded pore apertures to broaden their practical applications in biocatalysis.

Industrial applications of fungal lipases: a review

Fungal lipases (triacylglycerol acyl hydrolases EC 3.1.1.3) are significant industrial enzymes and have several applications in a number of industries and fields. Fungal lipases are found in several species of fungi and yeast. These enzymes are carboxylic acid esterases, categorized under the serine hydrolase family, and do not require any cofactor during the catalyzing of the reactions. It was also noticed that processes including the extraction and purification of lipases from fungi are comparatively easier and cheaper than other sources of lipases. In addition, fungal lipases have been classified into three chief classes, namely, GX, GGGX, and Y. Fungal lipases have applications not only in the hydrolysis of fats and oils (triglycerides) but are also involved in synthetic reactions such as esterification, acidolysis, alcoholysis, interesterification, and aminolysis. The production and activity of fungal lipases are highly affected by the carbon source, nitrogen source, temperature, pH, metal ions, surfactants, and moisture content. Therefore, fungal lipases have several industrial and biotechnological applications in many fields such as biodiesel production, ester synthesis, production of biodegradable biopolymers, formulations of cosmetics and personal care products, detergent manufacturing, degreasing of leather, pulp and paper production, textile industry, biosensor development, and drug formulations and as a diagnostic tool in the medical sector, biodegradation of esters, and bioremediation of wastewater. The immobilization of fungal lipases onto different carriers also helps in improving the catalytic activities and efficiencies of lipases by increasing thermal and ionic stability (in organic solvents, high pH, and temperature), being easy to recycle, and inducing the volume-specific loading of the enzyme onto the support, and thus, these features have proved to be appropriate for use as biocatalysts in different sectors.

Biocatalysts Synthesized with Lipase from Pseudomonas cepacia on Glycol-Modified ZIF-8: Characterization and Utilization in the Synthesis of Green Biodiesel

This research presents results on the production of biodiesel from the transesterification of acylglycerides present in palm oil, using the biocatalysts ZIF-8-PCL and Gly@ZIF-8-PCL synthesized by immobilization of Pseudomonas Cepacia Lipase as catalytic materials and using pure ZIF-8 and Gly@ZIF-8 (modified ZIF-8) as supports. The Gly@ZIF-8 carbonaceous material was prepared by wet impregnation of ZIF-8 with ethylene glycol as the carbon source, and then thermally modified. The calcination conditions were 900 °C for two hours with a heating rate of 7 °C/min in an inert atmosphere. A textural characterization was performed, and results showed superficial changes of materials at the microporous and mesoporous levels for the Gly@ZIF-8 material. Both the starting materials and biocatalysts were characterized by infrared spectroscopy (FTIR) and Raman spectroscopy. During the transesterification, using the two biocatalysts (ZIF-8-PCL and Gly@ZIF-8-PCL), two supernatant liquids were generated which were characterized by infrared spectroscopy (FTIR), gas chromatography coupled to mass spectrometry (GC-MS), and nuclear magnetic resonance (NMR). The results show that the two routes of synthesis of supports from ZIF-8 will be configured as effective methods for the generation of effective biocatalysts for biodiesel production.

Evaluation of lipase access tunnels and analysis of substance transport in comparison with experimental data

Lipases (E.C. 3.1.1.3) have buried active sites and used access tunnels in the transport of substrates and products for biotransformation processes. Computational methods are used to predict the trajectory and energy profile of ligands through these tunnels, and they complement the experimental methodologies because they filter data, optimizing laboratory time and experimental costs. Access tunnels of Burkholderia cepacia lipase (BCL), Candida rugosa lipase (CRL), and porcine pancreas lipase (PPL) and the transport of fatty acids, alcohols and esters through the tunnels were evaluated using the online server CaverWeb V1.0, and server calculation results were compared with experimental data (productivity). BCL showed higher productivity with palmitic acid-C16:0 (4029.95 µmol/h mg); CRL obtained productivity for oleic acid-C18:1 (380.80 µmol/h mg), and PPL achieved productivity for lauric acid-C12:0 (71.27 µmol/h mg). The highest probability of transport for BCL is through the tunnels 1 and 2, for CRL through the tunnel 1, and for PPL through the tunnels 1, 2, 3 and 4. Thus, the best in silico result was the transport of the substrates palmitic acid and ethanol and product ethyl palmitate in tunnel 1 of BCL. This result corroborates with the best result for the productivity data (higher productivity for BCL with palmitic acid-4029.95 µmol/h mg). The combination of in silico evaluation and experimental data gave similar results, demonstrating that in silico approaches are a promising alternative for reducing screening tests and minimizing laboratory time in the bio-catalysis area by identifying the lipases with the greatest reaction potential, as in the case of this proposal.

Crystal Structures of the Plant Phospholipase A1 Proteins Reveal a Unique Dimerization Domain

Phospholipase is an enzyme that hydrolyzes various phospholipid substrates at specific ester bonds and plays important roles such as membrane remodeling, as digestive enzymes, and the regulation of cellular mechanism. Phospholipase proteins are divided into following the four major groups according to the ester bonds they cleave off: phospholipase A1 (PLA1), phospholipase A2 (PLA2), phospholipase C (PLC), and phospholipase D (PLD). Among the four phospholipase groups, PLA1 has been less studied than the other phospholipases. Here, we report the first molecular structures of plant PLA1s: AtDSEL and CaPLA1 derived from Arabidopsis thaliana and Capsicum annuum, respectively. AtDSEL and CaPLA1 are novel PLA1s in that they form homodimers since PLAs are generally in the form of a monomer. The dimerization domain at the C-terminal of the AtDSEL and CaPLA1 makes hydrophobic interactions between each monomer, respectively. The C-terminal domain is also present in PLA1s of other plants, but not in PLAs of mammals and fungi. An activity assay of AtDSEL toward various lipid substrates demonstrates that AtDSEL is specialized for the cleavage of sn-1 acyl chains. This report reveals a new domain that exists only in plant PLA1s and suggests that the domain is essential for homodimerization.

Insights into the Interaction between Immobilized Biocatalysts and Metal-Organic Frameworks: A Case Study of PCN-333

The immobilization of enzymes in metal-organic frameworks (MOFs) with preserved biofunctionality paves a promising way to solve problems regarding the stability and reusability of enzymes. However, the rational design of MOF-based biocomposites remains a considerable challenge as very little is known about the state of the enzyme, the MOF support, and their host-guest interactions upon immobilization. In this study, we elucidate the detailed host-guest interaction for MOF immobilized enzymes in the biointerface. Two enzymes with different sizes, lipase and insulin, have been immobilized in a mesoporous PCN-333(Al) MOF. The dynamic changes of local structures of the MOF host and enzyme guests have been experimentally revealed for the existence of the confinement effect to enzymes and van der Waals interaction in the biointerface between the aluminum oxo-cluster of the PCN-333 and the -NH2 species of enzymes. This kind of host-guest interaction renders the immobilization of enzymes in PCN-333 with high affinity and highly preserved enzymatic bioactivity.

Stabilization of enzymes via immobilization: Multipoint covalent attachment and other stabilization strategies

The use of enzymes in industrial processes requires the improvement of their features in many instances. Enzyme immobilization, a requirement to facilitate the recovery and reuse of these water-soluble catalysts, is one of the tools that researchers may utilize to improve many of their properties. This review is focused on how enzyme immobilization may improve enzyme stability. Starting from the stabilization effects that an enzyme may experience by the mere fact of being inside a solid particle, we detail other possibilities to stabilize enzymes: generation of favorable enzyme environments, prevention of enzyme subunit dissociation in multimeric enzymes, generation of more stable enzyme conformations, or enzyme rigidification via multipoint covalent attachment. In this last point, we will discuss the features of an "ideal" immobilization protocol to maximize the intensity of the enzyme-support interactions. The most interesting active groups in the support (glutaraldehyde, epoxide, glyoxyl and vinyl sulfone) will be also presented, discussing their main properties and uses. Some instances in which the number of enzyme-support bonds is not directly related to a higher stabilization will be also presented. Finally, the possibility of coupling site-directed mutagenesis or chemical modification to get a more intense multipoint covalent immobilization will be discussed.

Pseudomonas nanhaiensis sp. nov., a lipase-producing bacterium isolated from deep-sea sediment of the South China Sea

A bacterial lipase producing bacterium, designated SCS 2-3, was isolated from deep-sea sediment of the South China Sea. Phylogenetic analysis based on the 16S rRNA sequence revealed that strain SCS2-3 belonged to the genus Pseudomonas and had 98.56% similarity to P. xinjiangensis NRRL B-51270^T as the closest relative strain. MLSA using four protein-coding genes (dnaK, gyrA, recA, and rpoB) showed strain SCS 2-3 to form a separate branch. ANI and in silico DDH values between strain SCS 2-3 and related type strains of Pseudomonas were less than 81.51% and 23.80%, respectively. Genome comparison showed that strain SCS 2-3 shared 1875 core gene families with other eight closely related type strains in Pseudomonas, and the number of strain-unique genes was 263. Through gene annotations, genes related to lipase were found in the genome. Furthermore, a combination of phenotypic, chemotaxonomic, phylogenetic and genotypic data clearly indicated that strain SCS 2-3 represents a novel species of the genus Pseudomonas, for which the name Pseudomonas nanhaiensis sp. nov. is proposed. The type strain is SCS 2-3^T (= GDMCC 1.2219^T = JCM 34440^T).

Optimization of an organic solvent-tolerant lipase production by Staphylococcus capitis SH6. Immobilization for biodiesel production and biodegradation of waste greases

Using the statistical approach, this work seeks to optimize the process parameters to boost the generation of an organic solvent-tolerant lipase by Staphylococcus capitis SH6. The main parameters influencing the enzyme production were identified by using Plackett-Burman's screening design. Among the test variables, only tryptone (25 g/L), malt extract (2.5 g/L), NaCl (10 g/L) and pH (7.0) contributed positively to enzyme production. Then, the crude lipase was immobilized by adsorption on CaCO₃ at pH 10. A maximum immobilization efficiency of 82% was obtained by incubating 280 mg of enzyme with CaCO₃ (1 g) during 30 min. The immobilized lipase was more stable toward organic solvents than the free enzyme. It retained about 90% of its original activity in the presence of ethanol and methanol. After that, the immobilized enzyme was used for biodiesel production by transesterification process between waste oil and methanol or ethanol during 24 h at 30 °C. Our results show that the lipase can be utilized efficiently in biodiesel industry. Likewise, we have demonstrated that the immobilized enzyme may be implicated in the biodegradability of waste grease; the maximum conversion yield into fatty acids obtained after 12 h at 30 °C, was 57%.

Enhancement of protein thermostability by three consecutive mutations using loop-walking method and machine learning

We developed a method to improve protein thermostability, “loop-walking method”. Three consecutive positions in 12 loops of Burkholderia cepacia lipase were subjected to random mutagenesis to make 12 libraries. Screening allowed us to identify L7 as a hot-spot loop having an impact on thermostability, and the P233G/L234E/V235M mutant was found from 214 variants in the L7 library. Although a more excellent mutant might be discovered by screening all the 8000 P233X/L234X/V235X mutants, it was difficult to assay all of them. We therefore employed machine learning. Using thermostability data of the 214 mutants, a computational discrimination model was constructed to predict thermostability potentials. Among 7786 combinations ranked in silico, 20 promising candidates were selected and assayed. The P233D/L234P/V235S mutant retained 66% activity after heat treatment at 60 °C for 30 min, which was higher than those of the wild-type enzyme (5%) and the P233G/L234E/V235M mutant (35%).

Modulation of the Biocatalytic Properties of a Novel Lipase from Psychrophilic Serratia sp. (USBA-GBX-513) by Different Immobilization Strategies

In this work, the effect of different immobilization procedures on the properties of a lipase obtained from the extremophilic microorganism Serratia sp. USBA-GBX-513, which was isolated from Paramo soils of Los Nevados National Natural Park (Colombia), is reported. Different Shepharose beads were used: octyl-(OC), octyl-glyoxyl-(OC-GLX), cyanogen bromide (BrCN)-, and Q-Sepharose. The performance of the different immobilized extremophile lipase from Serratia (ESL) was compared with that of the lipase B from Candida antarctica (CALB). In all immobilization tests, hyperactivation of ESL was observed. The highest hyperactivation (10.3) was obtained by immobilization on the OC support. Subsequently, the thermal stability at pH 5, 7, and 9 and the stability in the presence of 50% (v/v) acetonitrile, 50% dioxane, and 50% tetrahydrofuran solvents at pH 7 and 40 °C were evaluated. ESL immobilized on octyl-Sepharose was the most stable biocatalyst at 90 °C and pH 9, while the most stable preparation at pH 5 was ESL immobilized on OC-GLX-Sepharose supports. Finally, in the presence of 50% (v/v) tetrahydrofuran (THF) or dioxane at 40 °C, ESL immobilized on OC-Sepharose was the most stable biocatalyst, while the immobilized preparation of ESL on Q-Sepharose was the most stable one in 40% (v/v) acetonitrile.

Immobilized lipases-based nano-biocatalytic systems - A versatile platform with incredible biotechnological potential

Lipases belong to α/β hydrolases that cause hydrolytic catalysis of triacylglycerols to release monoacylglycerols, diacylglycerols, and glycerol with free fatty acids. Lipases have a common active site that contains three amino acid residues in a conserved Gly-X-Ser-X-Gly motif: a nucleophilic serine residue, an acidic aspartic or glutamic acid residue, and a basic histidine residue. Lipase plays a significant role in numerous industrial and biotechnological processes, including paper, food, oleochemical and pharmaceutical applications. However, its instability and aqueous solubility make application expensive and relatively challenging. Immobilization has been considered as a promising approach to improve enzyme stability, reusability, and survival under extreme temperature and pH environments. Innumerable supporting material in the form of natural polymers and nanostructured materials is a crucial aspect in the procedure of lipase immobilization used to afford biocompatibility, stability in physio-chemical belongings, and profuse binding positions for enzymes. This review outlines the unique structural and functional properties of a large number of polymers and nanomaterials as robust support matrices for lipase immobilization. Given these supporting materials, the applications of immobilized lipases in different industries, such as biodiesel production, polymer synthesis, additives, detergent, textile, and food industry are also discussed.

A phenylalanine dynamic switch controls the interfacial activation of Rhizopus chinensis lipase

The catalytic mechanism of most lipases involves a step called "interfacial activation" which significantly increases lipases activity beyond the critical micellar concentration (CMC) of substrate. In the present study, Rhizopus chinensis lipase (RCL) was used as a research model to explore the mechanism of lipase interfacial activation beyond the CMC. Molecular dynamic (MD) simulations indicated the open- and closed-lid transitions and revealed that Phe113 was the critical site for RCL activation by its dynamic flipping. Such putative switch affecting interfacial activation has not been reported in lipase so far. The function of Phe113 was subsequently verified by mutation experiments. The F113W mutant increases the lipase catalytic efficiency (1.9 s^-1·μM^-1) to 280% at the optimum temperature (40 °C) and pH 8.5 with the addition of 0.12 μg protein in the 200 μL reaction system. MD simulations indicated that the fast flipping rate from the closed to the open state, the high open state proportion, and the exposure of the catalytic triad are the main reasons for the lipase activation. The mutual corroboration of simulations and site-directed mutagenesis results revealed the vital role of Phe113 in the lipase activation.

Effect of mutation at oxyanion hole residu (H110F) on activity of Lk4 lipase

Mutant of lipase at oxyanion hole (H110 F) was constructed. The gene was highly expressed in Eschericia coli BL21 (DE3) and the recombinant protein was purified using Ni-NTA affinity chromatography. The activity of mutant enzyme was significantly increased compared to that the wild type. Further comparison showed that both of the enzymes exhibited same optimum pH and temperature, and showed highest lipolytic activity on pNP-decanoate (C10). The wild type appeared lost of activity on C14 and C16 substrates meanwhile the mutant still showed activity up to 20 %. In the presence of non polar organic solvent such as n-hexane, the wild type became inactive enzyme meanwhile the mutant still remained 50 % of its activity. The results suggested that mutation at oxyanion hole (H110 F) caused enzyme-substrate interaction change resulting on elevation of activity, better activity toward longer carbon chain substrate and improving the activity in the present of non polar organic solvent.

Improvement of biodiesel production from palm oil by co-immobilization of Thermomyces lanuginosa lipase and Candida antarctica lipase B: Optimization using response surface methodology

Candida antarctica lipase B (CALB) and Thermomyces lanuginose lipase (TLL) were co-immobilized on epoxy functionalized silica gel via an isocyanide-based multicomponent reaction. The immobilization process was carried out in water (pH 7) at 25 °C, rapidly (3 h) resulting in high immobilization yields (100%) with a loading of 10 mg enzyme/g support. The immobilized preparations were used to produce biodiesel by transesterification of palm oil. In an optimization study, response surface methodology (RSM) and central composite rotatable design (CCRD) methods were used to study the effect of five independent factors including temperature, methanol to oil ratio, t-butanol concentration and CALB:TLL ratio on the yield of biodiesel production. The optimum combinations for the reaction were CALB:TLL ratio (2.1:1), t-butanol (45 wt%), temperature (47 °C), methanol: oil ratio (2.3). This resulted in a FAME yield of 94%, very close to the predicted value of 98%.

Bacterial triacylglycerol lipase is a potential cholesterol esterase: Identification of a key determinant for sterol-binding specificity

Cholesterol esterase (Che) from Burkholderia stabilis (BsChe) is a homolog of well-characterized and industrially relevant bacterial triacylglycerol lipases (Lips). BsChe is a rare bacterial Lip enzyme that exhibits practical Che activity and is currently used in clinical applications to determine total serum cholesterol levels. To investigate the sterol specificity of BsChe, we determined the X-ray structure of BsChe. We discovered a local structural change in the active-site cleft, which might be related to substrate binding and product release. We also performed molecular docking studies by using the X-ray models of BsChe and cholesterol linoleate (CLL), the most favorable substrate for BsChe. The results showed that the sterol moieties of reasonable CLL docking poses localized to a specific active-site cleft surface formed by Leu266 and Ile287, which are unconserved among Burkholderia Lip homologs. Site-directed mutagenesis identified these residues as essential for the Che activity of BsChe, and Leu or Ile substitution conferred marked Che activity to Burkholderia Lips. In particular, Burkholderia cepacia and Burkholderia ubonensis Lips with the V266L/L287I double mutation exhibited ~50-fold and 500-fold higher Che activities than those of the wild-type enzymes, respectively. These results provide new insights into the substrate-binding mechanisms and selectivities of bacterial Lips.

Rationally design and chemical modification: Getting a new and efficient biocatalyst for Henry reaction

A robust biocatalyst for green Henry reaction was achieved. Based on the fact that Henry reaction requires a base for proton transfer, we firstly proposed that the catalytic triad of lipase could play this role. The distance between the substrate and the catalytic center and the surrounding amino acid interaction network were used as the criterion. Benzaldehyde and nitromethane were used as the model reaction, RNL (Lipase from Rhizopus niveus) was considered to be the best Henry reaction catalyst via a molecular dynamics simulation. Then experiments demonstrated that RNL has a yield of 48 % using model substrate in water. Further, in order to increase product yield, the chemical modifier 1, 2-cyclohexanedione (CHD) was used to modify Arg on RNL. As a result, RNL (CHD) increased the activity of catalyzing Henry reaction and had a broad spectrum of substrates, the yield of the product was as high as 67-99 %.

Multi-Combilipases: Co-Immobilizing Lipases with Very Different Stabilities Combining Immobilization via Interfacial Activation and Ion Exchange. The Reuse of the Most Stable Co-Immobilized Enzymes after Inactivation of the Least Stable Ones

The lipases A and B from Candida antarctica (CALA and CALB), Thermomyces lanuginosus (TLL) or Rhizomucor miehei (RML), and the commercial and artificial phospholipase Lecitase ultra (LEU) may be co-immobilized on octyl agarose beads. However, LEU and RML became almost fully inactivated under conditions where CALA, CALB and TLL retained full activity. This means that, to have a five components co-immobilized combi-lipase, we should discard 3 fully active and immobilized enzymes when the other two enzymes are inactivated. To solve this situation, CALA, CALB and TLL have been co-immobilized on octyl-vinyl sulfone agarose beads, coated with polyethylenimine (PEI) and the least stable enzymes, RML and LEU have been co-immobilized over these immobilized enzymes. The coating with PEI is even favorable for the activity of the immobilized enzymes. It was checked that RML and LEU could be released from the enzyme-PEI coated biocatalyst, although this also produced some release of the PEI. That way, a protocol was developed to co-immobilize the five enzymes, in a way that the most stable could be reused after the inactivation of the least stable ones. After RML and LEU inactivation, the combi-biocatalysts were incubated in 0.5 M of ammonium sulfate to release the inactivated enzymes, incubated again with PEI and a new RML and LEU batch could be immobilized, maintaining the activity of the three most stable enzymes for at least five cycles of incubation at pH 7.0 and 60 °C for 3 h, incubation on ammonium sulfate, incubation in PEI and co-immobilization of new enzymes. The effect of the order of co-immobilization of the different enzymes on the co-immobilized biocatalyst activity was also investigated using different substrates, finding that when the most active enzyme versus one substrate was immobilized first (nearer to the surface of the particle), the activity was higher than when this enzyme was co-immobilized last (nearer to the particle core).

Designing a Support for Lipase Immobilization Based On Magnetic, Hydrophobic, and Mesoporous Silica

A mesoporous, magnetic, and hydrophobic material was designed step by step to act as a support for lipase immobilization. Its pore size (8.0 nm) is compatible with the size of lipase from Thermomyces lanuginosus (TLL), and its hydrophobic surface (contact angle of a water drop = 125°) was planned to interact with lipase on its interfacially activated form (open conformation). The presence of magnetite particles provides magnetic retrieval of the material and enables recyclability of the biocatalysts. Regarding immobilization parameters, the hydrophobic support was tested in comparison to the unmodified hydrophilic support in phosphate buffer solution (50 mmol L^-1, pH 7.5) at 25 °C. Hydrophobicity was found to be critical for the amount of immobilized TLL (immobilization yield of 97% versus 36% for the hydrophilic support), whereas the hydrophilic support favors the native conformational state and substrate access to the enzyme's catalytic site (specific activity of 5.7 versus 4.7 U g^-1 for the hydrophobic support, even when it has higher TLL content). Therefore, the hydrophobic support immobilizes higher amounts of TLL and the hydrophilic support keeps the enzyme hyperactivated. Last, due to the stronger interactions of TLL with hydrophobic surfaces, the hydrophobic support offers better preservation of enzyme activity in repeated cycles (76% of activity retained after three cycles versus 50% for the hydrophilic support).

Lipase activation by molecular bioimprinting: The role of interactions between fatty acids and enzyme active site

Bioimprinting is an easy, sustainable and low-cost technique that promotes a printing of potential substrates on enzyme structure, inducing a more selective and stable conformation. Bioimprinting promotes conformational changes in enzymes, resulting in better catalytic performance. In this work, the effect of bioimprinting of Burkholderia cepacia lipase (BCL) and porcine pancreatic extracts (PPE) with four different fatty acids (lauric acid (C12:0), myristic acid (C14:0), palmitic acid (C16:0), and stearic acid (C18:0)) was investigated. The results demonstrated that the better bioimprinting effect was in BCL with lauric acid in esterification reaction, promoting BCL activation in which relative enzyme activity was 70 times greater than nonimprinted BCL. Bioimprinting results were influenced by the carbon chain length of fatty acids imprinted in the BCL, in which the effects were weaker with the chain increase. Molecular docking was performed to better understand the bioimprinting method. The results of these simulations showed that indeed all fatty acids were imprinted in the active site of BCL. However, lauric acid presented the highest imprinting preference in the active site of BCL, resulting in the highest relative activity. Furthermore, Fourier transform infrared (FTIR) analysis confirmed important variations in secondary structure of bioimprinting BCL with lauric acid, in which there was a reduction in the α-helix content and an increase in the β-sheet content that facilitated substrate access to the active site of BCL and led higher rigidity, resulting in high activity. Bioimprinted BCL with lauric acid showed excellent operational stability in esterification reaction, maintaining its original relative activity after five successive cycles. Thus, the results show that bioimprinting of BCL with lauric acid is a successful strategy due to its high catalytic activity and reusability.

Organic Modifications of SBA-15 Improves the Enzymatic Properties of its Supported TLL

In this study, lipase from Thermomyces lanuginosus (TLL) was immobilized onto the parent and organic groups modified SBA-15, and the enzymatic properties of the obtained immobilized TLL samples were investigated. 1) Activity of SBA-15-TLL at 2862.78 ± 293.24 U/g was obtained. 2) Most of the organic groups modification favored a great improvement in activity, and higher activity over 12000 U/g was observed for N-phenylaminomethyl and phenyl group modification. 3) Most of the supported TLL showed better thermostability in air while poor in phosphate buffer, with over 80% vers less than 20% of their initial activity retained after 4 h incubation at 70℃. 4) The n-dodecyl, phenyl and N-phenylaminomethyl group functionalization decreased the sensitivity of immobilized TLL in extreme pH values. 5) The n-octyl and 2-(propoxymethyl)oxirane group modification confered the supported TLL good reusability, and over 60% of their initial activity was retained after five successive cycles of reuse.

Low-resolution molecular shape, biochemical characterization and emulsification properties of a halotolerant esterase from Bacillus licheniformis

Bacterial esterases are highly versatile enzymes, currently widely used in detergents, biosurfactants, bioemulsifiers and as biocatalysts in paper and food industries. Present work describes heterologous expression, purification, and biophysical and biochemical characterization of a halotolerant esterase from Bacillus licheniformis (BlEstA). BlEstA preferentially cleaves pNP-octanoate and both activity and stability of the enzyme increased in the presence of 2 M NaCl, and also with several organic solvents (ethanol, methanol and DMSO). Furthermore, BlEstA has considerable emulsifying properties, particularly with olive oil as substrate. Our studies also show that the enzyme is monomeric in solution and its small-angle X-ray scattering low-resolution molecular envelope fits well its high-resolution homology model.

One Pot Use of Combilipases for Full Modification of Oils and Fats: Multifunctional and Heterogeneous Substrates

Lipases are among the most utilized enzymes in biocatalysis. In many instances, the main reason for their use is their high specificity or selectivity. However, when full modification of a multifunctional and heterogeneous substrate is pursued, enzyme selectivity and specificity become a problem. This is the case of hydrolysis of oils and fats to produce free fatty acids or their alcoholysis to produce biodiesel, which can be considered cascade reactions. In these cases, to the original heterogeneity of the substrate, the presence of intermediate products, such as diglycerides or monoglycerides, can be an additional drawback. Using these heterogeneous substrates, enzyme specificity can promote that some substrates (initial substrates or intermediate products) may not be recognized as such (in the worst case scenario they may be acting as inhibitors) by the enzyme, causing yields and reaction rates to drop. To solve this situation, a mixture of lipases with different specificity, selectivity and differently affected by the reaction conditions can offer much better results than the use of a single lipase exhibiting a very high initial activity or even the best global reaction course. This mixture of lipases from different sources has been called “combilipases” and is becoming increasingly popular. They include the use of liquid lipase formulations or immobilized lipases. In some instances, the lipases have been coimmobilized. Some discussion is offered regarding the problems that this coimmobilization may give rise to, and some strategies to solve some of these problems are proposed. The use of combilipases in the future may be extended to other processes and enzymes.

Hydrophilic Glyceryl Ferulates Preparation Catalyzed by Free Lipase B from Candida antartica

Ferulic acid (FA), 4-hydroxyl-3-methoxy-2-benzylacrylic acid, has antioxidant, anticancer and ultraviolet absorption activities. However, the low hydrophilicity of FA has limited its application. Glyceryl ferulate (FG), which is an all-natural hydrophilic derivative of FA, can be used as an antioxidant and UV filter in food and cosmetic formulations. However, the applications of FG in these fields are limited due to its low content in nature. In this work, free liquid lipase was firstly used as a catalyst for FG preparation. Several different free liquid lipases (Candida antartica lipase-B, Candida antartica lipase-A, Thermomyces lanuginosus (Lipozyme TL 100L)) were screened and compared. The effects of the transesterification parameters (time, temperature, enzyme load and substrate ratio) were optimized and evaluated by response surface methodology. A reaction thermodynamic investigation was also performed. The results showed that, among the tested free lipases, the maximum FG yield (84.8±1.5%) was achieved using free Candida antartica lipase-B. Under the optimized conditions (an atmospheric system, an enzyme load of 11.1% and a 20:1 molar ratio of glycerol to EF at 70°C for 39.5 h), the FG yield and EF conversion were 84.8±1.5% and 95.7±1.2%, respectively. The activation energies of FG formation and EF conversion were 56.4 and 58.0kJ/mol, respectively.

Comparative Structural Analysis of Different Mycobacteriophage-Derived Mycolylarabinogalactan Esterases (Lysin B)

Mycobacteriophage endolysins have emerged as a potential alternative to the current antimycobacterial agents. This study focuses on mycolylarabinogalactan hydrolase (LysB) enzymes of the α/β-hydrolase family, which disrupt the unique mycolic acid layer of mycobacterium cell wall. Multiple sequence alignment and structural analysis studies showed LysB-D29, the only enzyme with a solved three-dimensional structure, to share several common features with esterases (lacking lid domain) and lipases (acting on long chain lipids). Sequence and structural comparisons of 30 LysB homology models showed great variation in domain organizations and total protein length with major differences in the loop-5 motif harboring the catalytic histidine residue. Docking of different p-nitrophenyl ligands (C4-C18) to LysB-3D models revealed that the differences in length and residues of loop-5 contributed towards wide diversity of active site conformations (long tunnels, deep and superficial funnels, shallow bowls, and a narrow buried cave) resembling that of lipases, cutinases, and esterases. A set of seven LysB enzymes were recombinantly produced; their activity against p-nitrophenyl esters could be related to their active site conformation and acyl binding site. LysB-D29 (long tunnel) showed the highest activity with long chain p-nitrophenyl palmitate followed by LysB-Omega (shallow bowl) and LysB-Saal (deep funnel).

Carboxylic Ester Hydrolases in Bacteria: Active Site, Structure, Function and Application

Carboxylic ester hydrolases (CEHs), which catalyze the hydrolysis of carboxylic esters to produce alcohol and acid, are identified in three domains of life. In the Protein Data Bank (PDB), 136 crystal structures of bacterial CEHs (424 PDB codes) from 52 genera and metagenome have been reported. In this review, we categorize these structures based on catalytic machinery, structure and substrate specificity to provide a comprehensive understanding of the bacterial CEHs. CEHs use Ser, Asp or water as a nucleophile to drive diverse catalytic machinery. The α/β/α sandwich architecture is most frequently found in CEHs, but 3-solenoid, β-barrel, up-down bundle, α/β/β/α 4-layer sandwich, 6 or 7 propeller and α/β barrel architectures are also found in these CEHs. Most are substrate-specific to various esters with types of head group and lengths of the acyl chain, but some CEHs exhibit peptidase or lactamase activities. CEHs are widely used in industrial applications, and are the objects of research in structure- or mutation-based protein engineering. Structural studies of CEHs are still necessary for understanding their biological roles, identifying their structure-based functions and structure-based engineering and their potential industrial applications.

Biochemical Characterization of a Novel α/β-Hydrolase/FSH from the White Shrimp Litopenaeus vannamei

(1) Background: Lipases and esterases are important enzymes that share the α/β hydrolase fold. The activity and cellular localization are important characteristics to understand the role of such enzymes in an organism. (2) Methods: Bioinformatic and biochemical tools were used to describe a new α/β hydrolase from a Litopenaeus vannamei transcriptome (LvFHS for Family Serine Hydrolase). (3) Results: The enzyme was obtained by heterologous overexpression in Escherichia coli and showed hydrolytic activity towards short-chain lipid substrates and high affinity to long-chain lipid substrates. Anti-LvFHS antibodies were produced in rabbit that immunodetected the LvFSH enzyme in several shrimp tissues. (4) Conclusions: The protein obtained and analyzed was an α/β hydrolase with esterase and lipase-type activity towards long-chain substrates up to 12 carbons; its immunodetection in shrimp tissues suggests that it has an intracellular localization, and predicted roles in energy mobilization and signal transduction.

Exploring the influence of phospholipid monolayer conformation and environmental conditions on the interfacial binding of Gibberella Zeae lipase

The involvement of different parameters on Gibberella zeae lipase (GZEL) membrane binding were characterized by using monomolecular film technology and circular dichroism spectroscopy. Among four kinds of phospholipid monolayers, 1,2‑dimyristoyl‑sn‑glycero‑3‑phosphoethanolamine have the highest maximum insertion pressure (MIP) value. Comparing the GZEL adsorption to phosphatidylcholine monolayers with different acyl chains in sn-1 and sn-2 positions, the higher MIP values were found for 1,2‑dilauroyl‑sn‑glycero‑3‑phosphocholine. Significantly improvement between 1,2‑dioleoyl‑sn‑glycero‑3‑phosphocholine and 1,2‑distearoyl‑sn‑glycero‑3‑phosphocholine suggested that the presence of fatty acid unsaturation may affect protein adsorption by changing the chemical structure in each phospholipid. The MIP value was shown higher (48.6 mN m^-1) at pH 5 and pH 6 (47.5 ± 1.9 mN m^-1) but decreased significantly (34.2 mN m^-1) at pH 9. This may indicate that the proportion of helices in the protein decreases with the alteration of the catalytic center, thus affecting the binding of the protein to its substrate. The MIP values obviously decreased with increasing salt ion concentration, suggesting that excessive salt ion concentration may destabilize the secondary and tertiary structures of the protein, thereby affecting the characteristics of its adsorption at the interfaces. Present studies improve our understanding on the protein-membrane interaction of this enzyme.

Purification and characterization of fat body lipase from the Greater Wax MothGalleria mellonella(Lepidoptera: Pyralidae).. [DOI: 10.1101/625129] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Lipid mobilization and transport in insects is under investigation, especially lipases and lipophorin because of their roles in energy production and transport of lipids at flying activity. The present study has been conducted to purify intracellular fat body lipase for the first time, from last larval instar ofGalleria mellonella. Purification methods by combination of ammonium sulfate precipitation and gel filtration using Sephadex G-100 demonstrated that the amount of protein and the specific activity of fat body lipase were 0.008633±0.000551 mg/ml and 1.5754±0.1042 μmol/min/mg protein, respectively, with a 98.9 fold purity and recovery of 50.81%. Hence, the sephadex G-100 step was more effective in purification process. SDS-PAGE and zymogram revealed that fat body lipase showed two monomers with molecular weights of 178.8 and 62.6 kDa. Furthermore biochemical characterization of fat body lipase was carried out through testing its activities against several factors such as; different temperatures, pH ranges, metal ions and inhibitors ending by determination of their kinetic parameters with the use ofp-Nitrophenyl butyrate (PNPB) as a substrate. The highest activities of enzyme were determined at the temperature ranges of 35-37°C and 37-40°C and pH ranges of 7-9 and 7–10. The partially purified enzyme showed significant stimulation by Ca2+, K+and Na+metal ions indicating that fat body lipase is metalloproteinase. Additionally, lipase activity was strongly inhibited by some inhibitors; phenylmethylsulfony fluoride (PMSF), ethylene-diaminetetractic acid (EDTA) and ethylene glycoltetraacetic acid (EGTA) providing an evidence of presence of serine residue and activation of enzymes by metal ions. Kinetic parameters were 301.95mM Kmand 0.316 Umg−1Vmax. By considering the purification of fat body lipase from larvae and using some inhibitors especially ion chelating agents, it is suggested to develop this study by using lipase inhibitors to reach a successful control ofGalleria mellonellain the near future.

Tailoring a robust and recyclable nanobiocatalyst by immobilization of Pseudomonas fluorescens lipase on carbon nanofiber and its application in synthesis of enantiopure carboetomidate analogue

Pseudomonas fluorescens lipase (PFL) was covalently immobilized on carbon nanofiber (CNF) using 1‑ethyl‑3‑[3‑dimethylaminopropyl] carbodiimide (EDC)/N‑hydroxysuccinimide (NHS). Surface functionalization of carbon nanofiber augments dispersibility as well as efficiency of covalent immobilization. Crucial parameters for immobilization such as pH, enzyme-support ratio, reaction time and mixing rate were optimized using one factor at a time (OFAT) approach. The nanobiocatalyst prepared under optimized conditions demonstrated a ten-fold increase in enzyme activity and the advantage of high thermal stability (up to 85 °C) along with 10 cycles of reusability. Subsequently practical application of the nanobiocatalyst was explored in the kinetic resolution of racemic 1‑phenylethanol into (S)‑1‑phenylethanol [C = 49.1%, ee_p = 99.5%, ee_s = 98.5% and E value = 151.4] followed by Mitsunobu reaction with a substituted pyrrole, giving an enantiopure (R)-carboetomidate analogue (yield = 83%).