Dynamic proteins in bacteria

Cell geometry and leaflet bilayer asymmetry regulate domain formation in plasma membranes

We model how pattern formation in a multicomponent lipid bilayer pinned to an elastic substrate is governed by the interplay between lipid phase separation and the tendency of domains of high intrinsic curvature lipids to deform the membrane away from a stiff substrate such as the cell wall. The emergent patterns, which include compact and striped lipid microdomains, are anticorrelated across the two leaflets and depend on leaflet asymmetry, the ability of lipids to flip between leaflets, and the global geometry. We characterize analytically the dependence of stripe width on lipid parameters, and consider the implications of interleaflet patterning for curvature-dependent lipid localization.

Effect of the Min system on timing of cell division in Escherichia coli

In Escherichia coli the Min protein system plays an important role in positioning the division site. We show that this system also has an effect on timing of cell division. We do this in a quantitative way by measuring the cell division waiting time (defined as time difference between appearance of a division site and the division event) and the Z-ring existence time. Both quantities are found to be different in WT and cells without functional Min system. We develop a series of theoretical models whose predictions are compared with the experimental findings. Continuous improvement leads to a final model that is able to explain all relevant experimental observations. In particular, it shows that the chromosome segregation defect caused by the absence of Min proteins has an important influence on timing of cell division. Our results indicate that the Min system affects the septum formation rate. In the absence of the Min proteins this rate is reduced, leading to the observed strongly randomized cell division events and the longer division waiting times.

Chromosome segregation impacts on cell growth and division site selection in Corynebacterium glutamicum

Spatial and temporal regulation of bacterial cell division is imperative for the production of viable offspring. In many rod-shaped bacteria, regulatory systems such as the Min system and nucleoid occlusion ensure the high fidelity of midcell divisome positioning. However, regulation of division site selection in bacteria lacking recognizable Min and nucleoid occlusion remains less well understood. Here, we describe one such rod-shaped organism, Corynebacterium glutamicum, which does not always place the division septum precisely at midcell. Here we now show at single cell level that cell growth and division site selection are spatially and temporally regulated by chromosome segregation. Mutants defective in chromosome segregation have more variable cell growth and aberrant placement of the division site. In these mutants, division septa constrict over and often guillotine the nucleoid, leading to nonviable, DNA-free cells. Our results suggest that chromosome segregation or some nucleoid associated factor influences growth and division site selection in C. glutamicum. Understanding growth and regulation of C. glutamicum cells will also be of importance to develop strains for industrial production of biomolecules, such as amino acids.

The product of tadZ, a new member of the parA/minD superfamily, localizes to a pole in Aggregatibacter actinomycetemcomitans

Aggregatibacter actinomycetemcomitans establishes a tenacious biofilm that is important for periodontal disease. The tad locus encodes the components for the secretion and biogenesis of Flp pili, which are necessary for the biofilm to form. TadZ is required, but its function has been elusive. We show that tadZ genes belong to the parA/minD superfamily of genes and that TadZ from A. actinomycetemcomitans (AaTadZ) forms a polar focus in the cell independent of any other tad locus protein. Mutations indicate that regions in AaTadZ are required for polar localization and biofilm formation. We show that AaTadZ dimerizes and that all TadZ proteins are predicted to have a Walker-like A box. However, they all lack the conserved lysine at position 6 (K6) present in the canonical Walker-like A box. When the alanine residue (A6) in the atypical Walker-like A box of AaTadZ was converted to lysine, the mutant protein remained able to dimerize and localize, but it was unable to allow the formation of a biofilm. Another essential biofilm protein, the ATPase (AaTadA), also localizes to a pole. However, its correct localization depends on the presence of AaTadZ. We suggest that the TadZ proteins mediate polar localization of the Tad secretion apparatus.

Spatial resolution of two bacterial cell division proteins: ZapA recruits ZapB to the inner face of the Z-ring

FtsZ, the essential regulator of bacterial cell division, is a dynamic cytoskeletal protein that forms helices that condense into the Z-ring prior to division. Two small coiled-coil proteins, ZapA and ZapB, are both recruited early to the Z-ring. We show here that ZapB is recruited to the Z-ring by ZapA. A direct interaction between ZapA and ZapB is supported by bacterial two-hybrid and in vitro interaction assays. Using high-resolution 3-D reconstruction microscopy, we find that, surprisingly, ZapB is located inside the Z-ring in virtually all cells investigated. We propose a molecular model in which ZapA increases lateral interactions between FtsZ proto-filaments and ZapB mediates further stabilization of this interaction by cross-linking ZapA molecules bound to adjacent FtsZ proto-filaments. Gene deletion and complementation assays show that ZapB can mitigate cell division and Z-ring assembly defects even in the absence of ZapA, raising the possibility that ZapB stimulates Z-ring assembly by two different mechanisms.

Novel coiled-coil cell division factor ZapB stimulates Z ring assembly and cell division

Formation of the Z ring is the first known event in bacterial cell division. However, it is not yet known how the assembly and contraction of the Z ring are regulated. Here, we identify a novel cell division factor ZapB in Escherichia coli that simultaneously stimulates Z ring assembly and cell division. Deletion of zapB resulted in delayed cell division and the formation of ectopic Z rings and spirals, whereas overexpression of ZapB resulted in nucleoid condensation and aberrant cell divisions. Localization of ZapB to the divisome depended on FtsZ but not FtsA, ZipA or FtsI, and ZapB interacted with FtsZ in a bacterial two-hybrid analysis. The simultaneous inactivation of FtsA and ZipA prevented Z ring assembly and ZapB localization. Time lapse microscopy showed that ZapB-GFP is present at mid-cell in a pattern very similar to that of FtsZ. Cells carrying a zapB deletion and the ftsZ84(ts) allele exhibited a synthetic sick phenotype and aberrant cell divisions. The crystal structure showed that ZapB exists as a dimer that is 100% coiled-coil. In vitro, ZapB self-assembled into long filaments and bundles. These results raise the possibility that ZapB stimulates Z ring formation directly via its capacity to self-assemble into larger structures.

Comparative proteomics of cell division mutants and wild-type of Synechococcus sp. strain PCC 7942

Bacterial cell division is a highly co-ordinated and fine-tuned process. In the unicellular cyanobacterium Synechococcus sp. strain PCC 7942, inactivating mutations in the ftn2 and ftn6 genes block cell division and result in a phenotype with extensively elongated cells. In order to establish the pleiotropic responses induced and cellular processes affected by blocked cell division, the proteomes of wild-type and the cell division mutants Ftn2 and Ftn6 of Synechococcus sp. strain PCC 7942 were characterized and compared. By separating soluble extracted proteins on 2D gels, more than 800 protein spots were visualized on each SYPRO Ruby-stained gel. Quantitative differences in protein composition were detected by using the PDQuest software, and comparative analysis revealed that 76 protein spots changed significantly in the cell division mutants. These protein spots were selected for identification using peptide mass fingerprints generated by MALDI-TOF MS. Fifty-three protein spots were successfully identified, representing 44 different proteins. The upregulated proteins include proteins involved in cell division/cell morphogenesis, protein synthesis and processing, oxidative stress response, amino acid metabolism, nucleotide biosynthesis, and glycolysis, as well as unknown proteins. Among the downregulated proteins are those involved in chromosome segregation, protein processing, photosynthesis, redox regulation, carbon dioxide fixation, nucleotide biosynthesis, the biosynthetic pathway to fatty acids, and energy production. Besides eliciting common responses, inactivation of Ftn2 and Ftn6 in the mutants may result in different responses in protein levels between the mutants. Among 18 identified differentially affected protein spots, 75 % (9/12) of the protein spots affected in the Ftn2 mutant were upshifted, whereas in the Ftn6 mutant 70 % (7/10) of the affected protein spots were downshifted. Identification of such differentially expressed proteins provides new targets for future studies that will allow assessment of their physiological roles and significance in cyanobacterial cell division.

An experimentalist's guide to computational modelling of the Min system

Spatio-temporal oscillations of the Min proteins are essential for selecting the cell division site in Escherichia coli. These oscillations are a key example of a biological phenomenon that can only be understood on a systems level rather than on the level of its individual components. Here, we review the key concepts that mathematical modelling has added to our understanding of the Min system. While several different mechanisms have been proposed, in all cases the oscillations emerge from a dynamic instability of a uniform protein distribution. To generate this instability, however, the various mechanisms rely on different features of Min protein interactions and transport. We critically evaluate these mechanisms in light of recent experimental evidence. We also review the effects of fluctuations caused by low cellular concentration of Min proteins, and describe how stochastic effects may potentially influence Min protein dynamics.

A mechanical explanation for cytoskeletal rings and helices in bacteria

Several bacterial proteins have been shown to polymerize into coils or rings on cell membranes. These include the cytoskeletal proteins MreB, FtsZ, and MinD, which together with other cell components make up what is being called the bacterial cytoskeleton. We believe that these shapes arise, at least in part, from the interaction of the inherent mechanical properties of the protein polymers and the constraints imposed by the curved cell membrane. This hypothesis, presented as a simple mechanical model, was tested with numerical energy-minimization methods from which we found that there are five low-energy polymer morphologies on a rod-shaped membrane: rings, lines, helices, loops, and polar-targeted circles. Analytic theory was used to understand the possible structures and to create phase diagrams that show which parameter combinations lead to which structures. Inverting the results, it is possible to infer the effective mechanical bending parameters of protein polymers from fluorescence images of their shapes. This theory also provides a plausible explanation for the morphological changes exhibited by the Z ring in a sporulating Bacillus subtilis; is used to calculate the mechanical force exerted on a cell membrane by a polymer; and allows predictions of polymer shapes in mutant cells.

Treadmilling of a prokaryotic tubulin-like protein, TubZ, required for plasmid stability in Bacillus thuringiensis

Prokaryotes rely on a distant tubulin homolog, FtsZ, for assembling the cytokinetic ring essential for cell division, but are otherwise generally thought to lack tubulin-like polymers that participate in processes such as DNA segregation. Here we characterize a protein (TubZ) from the Bacillus thuringiensis virulence plasmid pBtoxis, which is a member of the tubulin/FtsZ GTPase superfamily but is only distantly related to both FtsZ and tubulin. TubZ assembles dynamic, linear polymers that exhibit directional polymerization with plus and minus ends, movement by treadmilling, and a critical concentration for assembly. A point mutation (D269A) that alters a highly conserved catalytic residue within the T7 loop completely eliminates treadmilling and allows the formation of stable polymers at a much lower protein concentration than the wild-type protein. When expressed in trans, TubZ(D269A) coassembles with wild-type TubZ and significantly reduces the stability of pBtoxis, demonstrating a direct correlation between TubZ dynamics and plasmid maintenance. The tubZ gene is in an operon with tubR, which encodes a putative DNA-binding protein that regulates TubZ levels. Our results suggest that TubZ is representative of a novel class of prokaryotic cytoskeletal proteins important for plasmid stability that diverged long ago from the ancient tubulin/FtsZ ancestor.

Min-oscillations in Escherichia coli induced by interactions of membrane-bound proteins

During division it is of primary importance for a cell to correctly determine the site of cleavage. The bacterium Escherichia coli divides in the center, producing two daughter cells of equal size. Selection of the center as the correct division site is in part achieved by the Min-proteins. They oscillate between the two cell poles and thereby prevent division at these locations. Here, a phenomenological description of these oscillations is presented, where lateral interactions between proteins on the cell membrane play a key role. Solutions to the dynamic equations are compared to experimental findings. In particular, the temporal period of the oscillations is measured as a function of the cell length and found to be compatible with the theoretical prediction.

Microfabrication meets microbiology

This Review summarizes methods for constructing systems and structures at micron or submicron scales that have applications in microbiology. These tools make it possible to manipulate individual cells and their immediate extracellular environments and have the capability to transform the study of microbial physiology and behaviour. Because of their simplicity, low cost and use in microfabrication, we focus on the application of soft lithographic techniques to the study of microorganisms, and describe several key areas in microbiology in which the development of new microfabricated materials and tools can have a crucial role.

Z ring as executor of bacterial cell division

It has become apparent that bacteria possess ancestors of the major eukaryotic cytoskeletal proteins. FtsZ, the ancestral homologue of tubulin, assembles into a cytoskeletal structure associated with cell division, designated the Z ring. Formation of the Z ring represents a major point of both spatial and temporal regulation of cell division. Here we discuss findings concerning the structure and the formation of the ring as well as its spatial and temporal regulation.

Mobility of Min-proteins in Escherichia coli measured by fluorescence correlation spectroscopy

In the bacterium Escherichia coli, selection of the division site involves pole-to-pole oscillations of the proteins MinD and MinE. Different oscillation mechanisms based on cooperative effects between Min-proteins and on the exchange of Min-proteins between the cytoplasm and the cytoplasmic membrane have been proposed. The parameters characterizing the dynamics of the Min-proteins in vivo are not known. It has therefore been difficult to compare the models quantitatively with experiments. Here, we present in vivo measurements of the mobility of MinD and MinE using fluorescence correlation spectroscopy. Two distinct timescales are clearly visible in the correlation curves. While the faster timescale can be attributed to cytoplasmic diffusion, the slower timescale could result from diffusion of membrane-bound proteins or from protein exchange between the cytoplasm and the membrane. We determine the diffusion constant of cytoplasmic MinD to be approximately 16 microm(2) s(-1), while for MinE we find about 10 microm(2) s(-1), independently of the processes responsible for the slower time-scale. The implications of the measured values for the oscillation mechanism are discussed.

A curvature-mediated mechanism for localization of lipids to bacterial poles

Subcellular protein localization is a universal feature of eukaryotic cells, and the ubiquity of protein localization in prokaryotic species is now acquiring greater appreciation. Though some targeting anchors are known, the origin of polar and division-site localization remains mysterious for a large fraction of bacterial proteins. Ultimately, the molecular components responsible for such symmetry breaking must employ a high degree of self-organization. Here we propose a novel physical mechanism, based on the two-dimensional curvature of the membrane, for spontaneous lipid targeting to the poles and division site of rod-shaped bacterial cells. If one of the membrane components has a large intrinsic curvature, the geometrical constraint of the plasma membrane by the more rigid bacterial cell wall naturally leads to lipid microphase separation. We find that the resulting clusters of high-curvature lipids are large enough to spontaneously and stably localize to the two cell poles. Recent evidence of localization of the phospholipid cardiolipin to the poles of bacterial cells suggests that polar targeting of some proteins may rely on the membrane's differential lipid content. More generally, aggregates of lipids, proteins, or lipid-protein complexes may localize in response to features of cell geometry incapable of localizing individual molecules.

Bacteria contain proteins that localize to different regions of the cell—the poles, the middle of the cell, or along the membrane in specific structures such as helices. This localization is often critical to function, from division-site placement, to cell-cycle progression, to maintaining the shape of the cell. How proteins localize to the poles of cells varies, and the mechanism is unknown for many proteins. A surprising discovery in recent years is that the membrane component cardiolipin localizes to the poles of the rod-shaped bacteria Escherichia coli and Bacillus subtilis. This work of Huang, Mukhopadhyay, and Wingreen presents a model of lipid polar localization in which clusters of cardiolipin are formed naturally due to the constraint of the membrane by the rigid cell wall, and these clusters are large enough to localize to the poles of the cell due to curvature, suggesting that clusters of lipids may serve to recruit proteins to the poles.

Diffusion of green fluorescent protein in three cell environments in Escherichia coli

Surprisingly little is known about the physical environment inside a prokaryotic cell. Knowledge of the rates at which proteins and other cell components can diffuse is crucial for the understanding of a cell as a physical system. There have been numerous measurements of diffusion coefficients in eukaryotic cells by using fluorescence recovery after photobleaching (FRAP) and related techniques. Much less information is available about diffusion coefficients in prokaryotic cells, which differ from eukaryotic cells in a number of significant respects. We have used FRAP to observe the diffusion of green fluorescent protein (GFP) in cells of Escherichia coli elongated by growth in the presence of cephalexin. GFP was expressed in the cytoplasm, exported into the periplasm using the twin-arginine translocation (Tat) system, or fused to an integral plasma membrane protein (TatA). We show that TatA-GFP diffuses in the plasma membrane with a diffusion coefficient comparable to that of a typical eukaryotic membrane protein. A previous report showed a very low rate of protein diffusion in the E. coli periplasm. However, we measured a GFP diffusion coefficient only slightly smaller in the periplasm than that in the cytoplasm, showing that both cell compartments are relatively fluid environments.

Proteomic profiling of ClpXP substrates after DNA damage reveals extensive instability within SOS regulon

ClpXP, a bacterial AAA+ protease, controls intracellular levels of many stress-response proteins. To investigate substrate profile changes caused by a specific environmental stress, quantitative mass spectrometry (SILAC) was used to analyze proteins trapped by ClpXP(trap) before and after DNA damage. The abundance of half of the trapped proteins changed more than 3-fold after damage. Overrepresented substrates included the DNA-repair proteins RecN and UvrA. Among SOS-response proteins, 25% were ClpXP substrates and, importantly, nearly all of the highly induced regulon members were rapidly degraded. Other proteins, including the stress regulator sigma(S), were underrepresented in ClpXP(trap) after DNA damage; overproduction experiments suggest that simple substrate competition does not account for this reduced recognition. We conclude that damage-response proteins are an unusually rapidly degraded family and that ClpXP has substantial capacity to process the influx of newly synthesized substrates while maintaining the ability to degrade its other substrates in an environmentally responsive manner.

A myxobacterial S-motility protein dances with poles

Coordinated movement of packs of S-motile Myxococcus xanthus cells relies on extrusion and retraction of pili that are located at one cell pole. At regular intervals the pili switch their polar location and cells reverse direction. Recently, the FrzS S-motility protein was observed to localize predominantly to the piliated pole. In time, FrzS was redeployed to the opposite pole and its sequestration at the new site coincided with cell reversal. The C-terminal region of FrzS, a response regulator homolog, is rich in coiled-coil motifs and is required for dynamic localization and proper motility. These results raise the possibility that proper spatial control of FrzS has an important role in the regulation of cell reversal and S-motility.

Role of MinD-membrane association in Min protein interactions

Division site placement in Escherichia coli involves interactions of the MinD protein with MinC and MinE and with other MinD molecules to form membrane-associated polymeric structures. In this work, as part of a study of these interactions, we established that heterologous membrane-associated proteins such as MinD can be targeted to the yeast nuclear membrane, dependent only on the presence of a membrane-binding domain and a nuclear targeting sequence. Targeting to the nuclear membrane was equally effective using the intrinsic MinD membrane-targeting domain or the completely unrelated membrane-targeting domain of cytochrome b(5). The chimeric proteins differing in their membrane-targeting sequences were then used to establish the roles of membrane association and specificity of the membrane anchor in MinD interactions, using the yeast two-hybrid system. The chimeric proteins were also used to show that the membrane association of MinD and MinE in E. coli cells had no specificity for the membrane anchor, whereas formation of MinDE polar zones and MinE rings required the presence of the native MinD membrane-targeting sequence.

Bacterial cell wall synthesis: new insights from localization studies

In order to maintain shape and withstand intracellular pressure, most bacteria are surrounded by a cell wall that consists mainly of the cross-linked polymer peptidoglycan (PG). The importance of PG for the maintenance of bacterial cell shape is underscored by the fact that, for various bacteria, several mutations affecting PG synthesis are associated with cell shape defects. In recent years, the application of fluorescence microscopy to the field of PG synthesis has led to an enormous increase in data on the relationship between cell wall synthesis and bacterial cell shape. First, a novel staining method enabled the visualization of PG precursor incorporation in live cells. Second, penicillin-binding proteins (PBPs), which mediate the final stages of PG synthesis, have been localized in various model organisms by means of immunofluorescence microscopy or green fluorescent protein fusions. In this review, we integrate the knowledge on the last stages of PG synthesis obtained in previous studies with the new data available on localization of PG synthesis and PBPs, in both rod-shaped and coccoid cells. We discuss a model in which, at least for a subset of PBPs, the presence of substrate is a major factor in determining PBP localization.

Min-protein oscillations in Escherichia coli with spontaneous formation of two-stranded filaments in a three-dimensional stochastic reaction-diffusion model

We introduce a three-dimensional stochastic reaction-diffusion model to describe MinD/MinE dynamical structures in Escherichia coli. This model spontaneously generates pole-to-pole oscillations of the membrane-associated MinD proteins, MinE ring, as well as filaments of the membrane-associated MinD proteins. Experimental data suggest MinD filaments are two-stranded. In order to model them we assume that each membrane-associated MinD protein can form up to three bonds with adjacent membrane-associated MinD molecules and that MinE induced hydrolysis strongly depends on the number of bonds MinD has established.

Mechanisms for chromosome and plasmid segregation

The fundamental problems in duplicating and transmitting genetic information posed by the geometric and topological features of DNA, combined with its large size, are qualitatively similar for prokaryotic and eukaryotic chromosomes. The evolutionary solutions to these problems reveal common themes. However, depending on differences in their organization, ploidy, and copy number, chromosomes and plasmids display distinct segregation strategies as well. In bacteria, chromosome duplication, likely mediated by a stationary replication factory, is accompanied by rapid, directed migration of the daughter duplexes with assistance from DNA-compacting and perhaps translocating proteins. The segregation of unit-copy or low-copy bacterial plasmids is also regulated spatially and temporally by their respective partitioning systems. Eukaryotic chromosomes utilize variations of a basic pairing and unpairing mechanism for faithful segregation during mitosis and meiosis. Rather surprisingly, the yeast plasmid 2-micron circle also resorts to a similar scheme for equal partitioning during mitosis.

Division accuracy in a stochastic model of Min oscillations in Escherichia coli

Accurate cell division in Escherichia coli requires the Min proteins MinC, MinD, and MinE as well as the presence of nucleoids. MinD and MinE exhibit spatial oscillations, moving from pole to pole of the bacterium, resulting in an average MinD concentration that is low at the center of the cell and high at the poles. This concentration minimum is thought to signal the site of cell division. Deterministic models of the Min oscillations reproduce many observed features of the system, including the concentration minimum of MinD. However, there are only a few thousand Min proteins in a bacterium, so stochastic effects are likely to play an important role. Here, we show that Monte Carlo simulations with a large number of proteins agree well with the results from a deterministic treatment of the equations. The location of minimum local MinD concentration is too variable to account for cell division accuracy in wild-type, but is consistent with the accuracy of cell division in cells without nucleoids. This finding confirms the need to include additional mechanisms, such as reciprocal interactions with the cell division ring or positioning of the nucleoids, to explain wild-type accuracy.

Continuum description of the cytoskeleton: ring formation in the cell cortex

Motivated by the formation of ringlike filament structures in the cortex of plant and animal cells, we study the dynamics of a two-dimensional layer of cytoskeletal filaments and motor proteins near a surface by a general continuum theory. As a result of active processes, dynamic patterns of filament orientation and density emerge via instabilities. We show that self-organization phenomena can lead to the formation of stationary and oscillating rings. We present state diagrams that reveal a rich scenario of asymptotic behaviors and discuss the role of boundary conditions.

Stochastic model for Soj relocation dynamics in Bacillus subtilis

The Bacillus subtilis Spo0J/Soj proteins, implicated in chromosome segregation and transcriptional regulation, show striking dynamics: Soj undergoes irregular relocations from pole to pole or nucleoid to nucleoid. Here, we report on a mathematical model of the Soj dynamics. Our model, which is closely based on the available experimental data, readily generates dynamic Soj relocations. We show that the irregularity of the relocations may be due to the stochastic nature of the underlying Spo0J/Soj interactions and diffusion. We propose explanations for the behavior of several Spo0J/Soj mutants, including the "freezing" of the Soj dynamics observed in filamentous cells. Our approach underlines the importance of incorporating stochastic effects when modeling spatiotemporal protein dynamics inside cells.

The rapid onset of elasticity during the assembly of the bacterial cell-division protein FtsZ

FtsZ, a prokaryotic homolog of eukaryotic tubulin, is a major constituent of the bacterial Z-ring, which contracts the cell wall during cell division. Because the mechanical properties of FtsZ are unknown, its function in the maintenance and constriction of the Z-ring is not well understood. Here, quantitative rheometry shows that, at physiological concentrations, FtsZ filaments form, extremely rapidly, highly elastic networks within physiological time scales ( approximately minutes), much faster than other major dynamic cytoskeletal filaments, including microtubule, actin, and vimentin in eukaryotes. FtsZ networks display a relatively low viscosity and a high resilience against shear stresses, as well as an elasticity that depends weakly on concentration, G approximately C(0.57), a power-law dependence consistent with crosslinked flexible filaments. Calcium, whose intracellular concentration increases during bacterial division, further enhances the elasticity of FtsZ networks through filament bundling, an effect that occurs in the presence of GTP, not GDP. These studies suggest that FtsZ filaments have the toughness to provide strong mechanical support for the maintenance and circumferential constriction of the bacterial Z-ring.

Interaction network among Escherichia coli membrane proteins involved in cell division as revealed by bacterial two-hybrid analysis

Formation of the Escherichia coli division septum is catalyzed by a number of essential proteins (named Fts) that assemble into a ring-like structure at the future division site. Several of these Fts proteins are intrinsic transmembrane proteins whose functions are largely unknown. Although these proteins appear to be recruited to the division site in a hierarchical order, the molecular interactions underlying the assembly of the cell division machinery remain mostly unspecified. In the present study, we used a bacterial two-hybrid system based on interaction-mediated reconstitution of a cyclic AMP (cAMP) signaling cascade to unravel the molecular basis of septum assembly by analyzing the protein interaction network among E. coli cell division proteins. Our results indicate that the Fts proteins are connected to one another through multiple interactions. A deletion mapping analysis carried out with two of these proteins, FtsQ and FtsI, revealed that different regions of the polypeptides are involved in their associations with their partners. Furthermore, we showed that the association between two Fts hybrid proteins could be modulated by the coexpression of a third Fts partner. Altogether, these data suggest that the cell division machinery assembly is driven by the cooperative association among the different Fts proteins to form a dynamic multiprotein structure at the septum site. In addition, our study shows that the cAMP-based two-hybrid system is particularly appropriate for analyzing molecular interactions between membrane proteins.

Cellular organization by self-organization: mechanisms and models for Min protein dynamics

We use the oscillating Min proteins of Escherichia coli as a prototype system to illustrate the current state and potential of modeling protein dynamics in space and time. We demonstrate how a theoretical approach has led to striking new insights into the mechanisms of self-organization in bacterial cells and indicate how these ideas may be applicable to more complex structure formation in eukaryotic cells.

Bacterial DNA segregation dynamics mediated by the polymerizing protein ParF

Prokaryotic DNA segregation most commonly involves members of the Walker-type ParA superfamily. Here we show that the ParF partition protein specified by the TP228 plasmid is a ParA ATPase that assembles into extensive filaments in vitro. Polymerization is potentiated by ATP binding and does not require nucleotide hydrolysis. Analysis of mutations in conserved residues of the Walker A motif established a functional coupling between filament dynamics and DNA partitioning. The partner partition protein ParG plays two separable roles in the ParF polymerization process. ParF is unrelated to prokaryotic polymerizing proteins of the actin or tubulin families, but is a homologue of the MinD cell division protein, which also assembles into filaments. The ultrastructures of the ParF and MinD polymers are remarkably similar. This points to an evolutionary parallel between DNA segregation and cytokinesis in prokaryotic cells, and reveals a potential molecular mechanism for plasmid and chromosome segregation mediated by the ubiquitous ParA-type proteins.

Cytoskeletal elements in bacteria

It has become clear recently that bacteria contain all of the cytoskeletal elements that are found in eukaryotic cells, demonstrating that the cytoskeleton has not been a eukaryotic invention, but evolved early in evolution. Several proteins that are involved in cell division, cell structure and DNA partitioning have been found to form highly dynamic ring structures or helical filaments underneath the cell membrane or throughout the length of the cell. These exciting findings indicate that several highly dynamic processes occur within prokaryotic cells, during growth or differentiation, that are vital for a wide range of cellular tasks.

Molecular analysis of the key cytokinetic components of cyanobacteria: FtsZ, ZipN and MinCDE

Using a bacterial two-hybrid system and a combination of in vivo and in vitro assays that take advantage of the green fluorescent reporter protein (GFP), we have investigated the localization and the protein-protein interaction of several key components of the cytokinetic machinery of cyanobacteria (i.e. the progenitor of chloroplast). We demonstrate that (i) the ftsZ and zipN genes are essential for the viability of the model cyanobacterium Synechocystis sp. PCC 6803, whereas the minCDE cluster is dispensable for cell growth; (ii) the GTP-binding domain of FtsZ is crucial to FtsZ assembly into the septal ring at mid-cell; (iii) the Z-ring of deeply constricted daughter cells is oriented perpendicularly to the mother Z-ring, showing that Synechocystis divides in alternating perpendicular planes; (iv) the MinCDE system affects the morphology of the cell, as well as the position and the shape of FtsZ structures; and (v) MinD is targeted to cell membranes in a process involving its C-terminal amphipathic helix, but not its ATP-binding region. Finally, we have also characterized a novel Z-interacting protein, ZipN, the N-terminal DnaJ domain of which is critical to the decoration of the Z-ring, and we report that this process is independent of MinCDE.

Polymerization of nucleotide-free, GDP- and GTP-bound cell division protein FtsZ: GDP makes the difference

Stable, more than 98% nucleotide-free apo-FtsZ was prepared from purified Methanococcus jannaschhi FtsZ. This facilitates the study of the functional mechanisms of this FtsZ, an assembling GTPase, which shares a common fold with eukaryotic tubulin. Apo-FtsZ underwent cooperative magnesium-induced polymerization with a similar critical concentration and morphology related to that of reconstituted GTP-bound FtsZ, suggesting that the binding of GTP contributes insignificantly to the stability of the FtsZ polymers. On the other hand, reconstituted GDP-FtsZ polymerized with a larger critical concentration than GTP-FtsZ, indicating that GDP binding destabilizes FtsZ polymers. Upon GTP hydrolysis by FtsZ polymers, in the absence of a continued GTP supply and under macromolecular crowding conditions enhancing FtsZ polymerization, the straight GTP polymers disappeared and were replaced by characteristic helically curved GDP-bound polymers. These results suggest that the roles of GTP binding and hydrolysis by this archaeal FtsZ are simply to facilitate disassembly. In a physiological situation in GTP excess, GDP-bound FtsZ subunits could again bind GTP, or trigger disassembly, or be recognized by FtsZ filament depolymerizing proteins, allowing the Z-ring dynamics during prokaryotic cell division.

Bacterial mitosis: partitioning protein ParA oscillates in spiral-shaped structures and positions plasmids at mid-cell

The par2 locus of Escherichia coli plasmid pB171 encodes oscillating ATPase ParA, DNA binding protein ParB and two cis-acting DNA regions to which ParB binds (parC1 and parC2). Three independent techniques were used to investigate the subcellular localization of plasmids carrying par2. In cells with a single plasmid focus, the focus located preferentially at mid-cell. In cells with two foci, these located at quarter-cell positions. In the absence of ParB and parC1/parC2, ParA-GFP formed stationary helices extending from one end of the nucleoid to the other. In the presence of ParB and parC1/parC2, ParA-GFP oscillated in spiral-shaped structures. Amino acid substitutions in ParA simultaneously abolished ParA spiral formation, oscillation and either plasmid localization or plasmid separation at mid-cell. Therefore, our results suggest that ParA spirals position plasmids at the middle of the bacterial nucleoid and subsequently separate them into daughter cells.

Monoglucosyldiacylglycerol, a Foreign Lipid, Can Substitute for Phosphatidylethanolamine in Essential Membrane-associated Functions in Escherichia coli

The mechanisms by which lipid bilayer properties govern or influence membrane protein functions are little understood, but a liquid-crystalline state and the presence of anionic and nonbilayer (NB)-prone lipids seem important. An Escherichia coli mutant lacking the major membrane lipid phosphatidylethanolamine (NB-prone) requires divalent cations for viability and cell integrity and is impaired in several membrane functions that are corrected by introduction of the "foreign" NB-prone neutral glycolipid alpha-monoglucosyldiacylglycerol (MGlcDAG) synthesized by the MGlcDAG synthase from Acholeplasma laidlawii. Dependence on Mg(2+) was reduced, and cellular yields and division malfunction were greatly improved. The increased passive membrane permeability of the mutant was not abolished, but protein-mediated osmotic stress adaptation to salts and sucrose was recovered by the presence of MGlcDAG. MGlcDAG also restored tryptophan prototrophy and active transport function of lactose permease, both critically dependent on phosphatidylethanolamine. Three mechanisms can explain the observed effects: NB-prone MGlcDAG improves the quenched lateral pressure profile across the bilayer; neutral MGlcDAG dilutes the high anionic lipid surface charge; MGlcDAG provides a neutral lipid that can hydrogen bond and/or partially ionize. The reduced dependence on Mg(2+) and lack of correction by high monovalent salts strongly support the essential nature of the NB properties of MGlcDAG.

Nucleoid restructuring in stationary-state bacteria

The textbook view of the bacterial cytoplasm as an unstructured environment has been overturned recently by studies that highlighted the extent to which non-random organization and coherent motion of intracellular components are central for bacterial life-sustaining activities. Because such a dynamic order critically depends on continuous consumption of energy, it cannot be perpetuated in starved, and hence energy-depleted, stationary-state bacteria. Here, we show that, at the onset of the stationary state, bacterial chromatin undergoes a massive reorganization into ordered toroidal structures through a process that is dictated by the intrinsic properties of DNA and by the ubiquitous starvation-induced DNA-binding protein Dps. As starvation proceeds, the toroidal morphology acts as a structural template that promotes the formation of DNA-Dps crystalline assemblies through epitaxial growth. Within the resulting condensed assemblies, DNA is effectively protected by means of structural sequestration. We thus conclude that the transition from bacterial active growth to stationary phase entails a co-ordinated process, in which the energy-dependent dynamic order of the chromatin is sequentially substituted with an equilibrium crystalline order.

Bacterial mitosis: ParM of plasmid R1 moves plasmid DNA by an actin-like insertional polymerization mechanism

Bacterial DNA segregation takes place in an active and ordered fashion. In the case of Escherichia coli plasmid R1, the partitioning system (par) separates paired plasmid copies and moves them to opposite cell poles. Here we address the mechanism by which the three components of the R1 par system act together to generate the force required for plasmid movement during segregation. ParR protein binds cooperatively to the centromeric parC DNA region, thereby forming a complex that interacts with the filament-forming actin-like ParM protein in an ATP-dependent manner, suggesting that plasmid movement is powered by insertional polymerization of ParM. Consistently, we find that segregating plasmids are positioned at the ends of extending ParM filaments. Thus, the process of R1 plasmid segregation in E. coli appears to be mechanistically analogous to the actin-based motility operating in eukaryotic cells. In addition, we find evidence suggesting that plasmid pairing is required for ParM polymerization.

Bacterial Mitotic Machineries

Here, we review recent progress that yields fundamental new insight into the molecular mechanisms behind plasmid and chromosome segregation in prokaryotic cells. In particular, we describe how prokaryotic actin homologs form mitotic machineries that segregate DNA before cell division. Thus, the ParM protein of plasmid R1 forms F actin-like filaments that separate and move plasmid DNA from mid-cell to the cell poles. Evidence from three different laboratories indicate that the morphogenetic MreB protein may be involved in segregation of the bacterial chromosome.

A Mechanism for Polar Protein Localization in Bacteria

We investigate a mechanism for the polar localization of proteins in bacteria. We focus on the MinCD/DivIVA system regulating division site placement in the rod-shaped bacterium Bacillus subtilis. Our model relies on a combination of geometric effects and reaction-diffusion dynamics to direct proteins to both cell poles, where division is then blocked. We discuss similarities and differences with related division models in Escherichia coli and also develop extensions of the model to asymmetric polar protein localization. We propose that our mechanism for polar localization may be employed more widely in bacteria, especially in outgrowing spores, which do not possess any pre-existing polar division apparatus from prior division events.

Energetics of the cooperative assembly of cell division protein FtsZ and the nucleotide hydrolysis switch

FtsZ is the first protein recruited to the bacterial division site, where it forms the cytokinetic Z ring. We have determined the functional energetics of FtsZ assembly, employing FtsZ from the thermophilic Archaea Methanococcus jannaschii bound to GTP, GMPCPP, GDP, or GMPCP, under different solution conditions. FtsZ oligomerizes in a magnesium-insensitive manner. FtsZ cooperatively assembles with magnesium and GTP or GMPCPP into large polymers, following a nucleated condensation polymerization mechanism, under nucleotide hydrolyzing and non-hydrolyzing conditions. The effect of temperature on the critical concentration indicates polymer elongation with an apparent heat capacity change of -800 +/- 100 cal mol-1 K-1 and positive enthalpy and entropy changes, compatible with axial hydrophobic contacts of each FtsZ in the polymer, and predicts optimal polymer stability near 75 degrees C. Assembly entails the binding of one medium affinity magnesium ion and the uptake of one proton per FtsZ. Interestingly, GDP- or GMPCP-liganded FtsZ cooperatively form helically curved polymers, with an elongation only 1-2 kcal mol-1 more unfavorable than the straight polymers formed with nucleotide triphosphate, suggesting a physiological requirement for FtsZ polymerization inhibitors. This GTP hydrolysis switch should provide the basic properties for FtsZ polymer disassembly and its functional dynamics.

The MinD membrane targeting sequence is a transplantable lipid-binding helix

MinD is a ubiquitous ATPase that plays a crucial role in selection of the division site in eubacteria, chloroplasts, and probably also Archaea. It was recently demonstrated that membrane localization of MinD is mediated by an 8-12-residue C-terminal motif termed the membrane targeting sequence or MTS. In this study we show that the MinD MTS is a transplantable lipid-binding motif that can effectively target heterologous proteins to the cell membrane. We demonstrate that eubacterial MTSs interact directly with lipid bilayers as an amphipathic helix, with a distinct preference for anionic phospholipids. Moreover, we provide evidence that the phospholipid preference of each MTS, as well as its affinity for biological membranes, has been evolutionarily "tuned" to its specific role in different bacteria. We propose a model to describe how the MTS is coupled to ATP binding to regulate the reversible membrane association of Escherichia coli MinD during its pole-to-pole oscillation cycle.

Essential cell division protein FtsZ assembles into one monomer-thick ribbons under conditions resembling the crowded intracellular environment

Experimental conditions that simulate the crowded bacterial cytoplasmic environment have been used to study the assembly of the essential cell division protein FtsZ from Escherichia coli. In solutions containing a suitable concentration of physiological osmolytes, macromolecular crowding promotes the GTP-dependent assembly of FtsZ into dynamic two-dimensional polymers that disassemble upon GTP depletion. Atomic force microscopy reveals that these FtsZ polymers adopt the shape of ribbons that are one subunit thick. When compared with the FtsZ filaments observed in vitro in the absence of crowding, the ribbons show a lag in the GTPase activity and a decrease in the GTPase rate and in the rate of GTP exchange within the polymer. We propose that, in the crowded bacterial cytoplasm under assembly-promoting conditions, the FtsZ filaments tend to align forming dynamic ribbon polymers. In vivo these ribbons would fit into the Z-ring even in the absence of other interactions. Therefore, the presence of mechanisms to prevent the spontaneous assembly of the Z-ring in non-dividing cells must be invoked.

Assembly of archaeal cell division protein FtsZ and a GTPase-inactive mutant into double-stranded filaments

We have studied the assembly and GTPase of purified FtsZ from the hyperthermophilic archaeon Methanococcus jannaschii, a structural homolog of eukaryotic tubulin, employing wild-type FtsZ, FtsZ-His6 (histidine-tagged FtsZ), and the new mutants FtsZ-W319Y and FtsZ-W319Y-His6, with light scattering, nucleotide analyses, electron microscopy, and image processing methods. This has revealed novel properties of FtsZ. The GTPase of archaeal FtsZ polymers is suppressed in Na+-containing buffer, generating stabilized structures that require GDP addition for disassembly. FtsZ assembly is polymorphic. Archaeal FtsZ(wt) assembles into associated and isolated filaments made of two parallel protofilaments with a 43 A longitudinal spacing between monomers, and this structure is also observed in bacterial FtsZ from Escherichia coli. The His6 extension facilitates the artificial formation of helical tubes and sheets. FtsZ-W319Y-His6 is an inactivated GTPase whose assembly remains regulated by GTP and Mg2+. It forms two-dimensional crystals made of symmetrical pairs of tubulin-like protofilaments, which associate in an antiparallel array (similarly to the known Ca2+-induced sheets of FtsZ-His6). In contrast to the lateral interactions of microtubule protofilaments, we propose that the primary assembly product of FtsZ is the double-stranded filament, one or several of which might form the dynamic Z ring during prokaryotic cell division.

ARC6 is a J-domain plastid division protein and an evolutionary descendant of the cyanobacterial cell division protein Ftn2

Replication of chloroplasts is essential for achieving and maintaining optimal plastid numbers in plant cells. The plastid division machinery contains components of both endosymbiotic and host cell origin, but little is known about the regulation and molecular mechanisms that govern the division process. The Arabidopsis mutant arc6 is defective in plastid division, and its leaf mesophyll cells contain only one or two grossly enlarged chloroplasts. We show here that arc6 chloroplasts also exhibit abnormal localization of the key plastid division proteins FtsZ1 and FtsZ2. Whereas in wild-type plants, the FtsZ proteins assemble into a ring at the plastid division site, chloroplasts in the arc6 mutant contain numerous short, disorganized FtsZ filament fragments. We identified the mutation in arc6 and show that the ARC6 gene encodes a chloroplast-targeted DnaJ-like protein localized to the plastid envelope membrane. An ARC6-green fluorescent protein fusion protein was localized to a ring at the center of the chloroplasts and rescued the chloroplast division defect in the arc6 mutant. The ARC6 gene product is related closely to Ftn2, a prokaryotic cell division protein unique to cyanobacteria. Based on the FtsZ filament morphology observed in the arc6 mutant and in plants that overexpress ARC6, we hypothesize that ARC6 functions in the assembly and/or stabilization of the plastid-dividing FtsZ ring. We also analyzed FtsZ localization patterns in transgenic plants in which plastid division was blocked by altered expression of the division site-determining factor AtMinD. Our results indicate that MinD and ARC6 act in opposite directions: ARC6 promotes and MinD inhibits FtsZ filament formation in the chloroplast.

Bacterial shape

In free-living eubacteria an external shell of peptidoglycan opposes internal hydrostatic pressure and prevents membrane rupture and death. At the same time, this wall imposes on each cell a shape. Because shape is both stable and heritable, as is the ability of many organisms to execute defined morphological transformations, cells must actively choose from among a large repertoire of available shapes. How they do so has been debated for decades, but recently experiment has begun to catch up with theory. Two discoveries are particularly informative. First, specific protein assemblies, nucleated by FtsZ, MreB or Mbl, appear to act as internal scaffolds that influence cell shape, perhaps by correctly localizing synthetic enzymes. Second, defects in cell shape are correlated with the presence of inappropriately placed, metabolically inert patches of peptidoglycan. When combined with what we know about mutants affecting cellular morphology, these observations suggest that bacteria may fabricate specific shapes by directing the synthesis of two kinds of cell wall: a long-lived, rigid framework that defines overall topology, and a metabolically plastic peptidoglycan whose shape is directed by internal scaffolds.