Influence of pH, water activity and temperature on the inactivation of Escherichia coli and Saccharomyces cerevisiae by pulsed electric fields

Deep learning enabled rapid classification of yeast species in food by imaging of yeast microcolonies

Diverse species of yeasts are commonly associated with food and food production environments. The contamination of food products by spoilage yeasts poses significant challenges, leading to quality degradation and food loss. Similarly, the introduction of undesirable strains during fermentation can cause considerable challenges with the quality and progress of the fermentation process. Conventional detection methods require the isolation of visible yeast colonies for genetic or biochemical characterization, which takes 5-7 days and demands significant labor. This study presents a deep learning-based yeast classification approach that combines conventional cultivation methods, white light optical microscopy of microcolony, and deep learning techniques for rapidly detecting and classifying yeasts. Utilizing deep convolutional neural networks, the model accurately discriminates 7 different yeasts within 6 h, achieving a mPrecision of 96.0 % and a mRecall of 96.3 %. Synthetic image dataset generated by generative adversarial networks (GAN) model further improved the model performance for Debaryomyces hansenii and Wickerhamomyces anomalus, yeast species with lower initial classification performance. With the addition of synthetic images in the training process, Precision for W. anomalus and Recall for D. hansenii increased by 7.7 % and 5.6 %, respectively. The yeast classification model was validated in the presence of microscopic food debris using tomato and tomato juice as representative examples of fresh produce and processed juice. The model maintained high classification accuracy in the presence of food debris (mPrecision and mRecall >93.9 %). Overall, this methodology significantly accelerates the detection and classification of yeast species using conventional cultivation and simple white light microscopy in combination with deep learning. The simplicity, including low cost of the experimental approaches and the robustness of the deep learning model make it a highly applicable approach for routine yeast monitoring and yeast spoilage control in the food industry.

Application of Ultrasound to Animal-Based Food to Improve Microbial Safety and Processing Efficiency

Animal-based foods such as meat, dairy, and eggs contain abundant essential proteins, vitamins, and minerals that are crucial for human nutrition. Therefore, there is a worldwide growing demand for animal-based products. Since animal-based foods are vital resources of nutrients, it is essential to ensure their microbial safety which may not be ensured by traditional food preservation methods. Although thermal food preservation methods ensure microbial inactivation, they may degrade the nutritional value, physicochemical properties, and sensory qualities of food. Consequently, non-thermal, ultrasound food preservation methods are used in the food industry to evaluate food products and ensure their safety. Ultrasound is the sound waves beyond the human audible range, with frequencies greater than 20 kHz. Two types of ultrasounds can be used for food processing: low-frequency, high-intensity (20-100 kHz, 10-1,000 W/cm2) and high-frequency, low-intensity (>1 MHz, <1 W/cm2). This review emphasizes the application of ultrasound to improve the microbial safety of animal-based foods. It further discusses the ultrasound generation mechanism, ultrasound technique for microbial inactivation, and application of ultrasound in various processing operations, namely thawing, extraction, and emulsification.

Effect of environmental water activity on microbial inactivation by intense pulsed light (IPL)

In this study, the effect of environmental aw on microbial inactivation by intense pulsed light (IPL) was investigated. Three different microorganisms (Gram-positive bacteria, Gram-negative bacteria, and yeast) were used as test organisms. The effect of environmental aw was assessed by irradiating each microbial suspension in sodium chloride solutions with different environmental aw levels (0.99-0.80). As the aw decreased, the aggregation of intracellular material of cell interior was changed and the cell number was increased. However, there was no significant difference in microbial reduction according to the aw after the 0.23-3.05 J/cm2 of IPL treatment. It was confirmed that yeast had the highest resistance to IPL because of the differences in cell structure and cell wall components between yeast and bacteria. Additional research is needed to clearly understand the inactivation mechanism according to the type of microorganism by controlling aw using various solutes.

Antibacterial Effect of Pomegranate Juice on Listeria innocua and E. coli in Different Media

The antibacterial effect of pomegranate juice (PJ) at six concentrations (0, 10, 20, 30, 40, and 50%) against Listeria innocua and Escherichia coli was investigated in distilled water (DW) and bacterial culture broth. L. innocua and E. coli at approximately 105 cfu mL-1 were inoculated in PJ samples and incubated at 4, 25, and 37 °C for 0, 6, 24, and 48 h. The bacterial population and pH of culture media were measured at each removal. Results indicated that the antibacterial effect of PJ was dependent upon bacteria species, juice concentration, incubation temperature, and growth medium. Higher juice concentration and incubation temperature resulted in increased antibacterial effects. Bacterial populations were decreased more significantly in DW systems than in the culture broth, while L. innocua was more sensitive to PJ than E. coli in the DW systems. Regardless of PJ concentrations in DW systems, L. innocua, initially inoculated at approximately 105 cfu mL-1, was reduced to undetectable levels at 25 and 37 °C within 24 h. The growth of L. innocua and E. coli was significantly inhibited in bacterial culture broth containing ≥ 20% PJ (p < 0.001). This study provides insight into the potential application of PJ in food and beverage products for food protection.

Application of electric field treatment (EFT) for microbial control in water and liquid food

Water disinfection and food pasteurization are critical to reducing waterborne and foodborne diseases, which have been a pressing public health issue globally. Electrified treatment processes are emerging and have become promising alternatives due to the low cost of electricity, independence of chemicals, and low potential to form by-products. Electric field treatment (EFT) is a physical pathogen inactivation approach, which damages cell membrane by irreversible electroporation. EFT has been studied for both water disinfection and food pasteurization. However, no study has systematically connected the two fields with an up-to-date review. In this article, we first provide a comprehensive background of microbial control in water and food, followed by the introduction of EFT. Subsequently, we summarize the recent EFT studies for pathogen inactivation from three aspects, the processing parameters, its efficacy against different pathogens, and the impact of liquid properties on the inactivation performance. We also review the development of novel configurations and materials for EFT devices to address the current challenges of EFT. This review introduces EFT from an engineering perspective and may serve as a bridge to connect the field of environmental engineering and food science.

Recent advances and potentiality of postbiotics in the food industry: Composition, inactivation methods, current applications in metabolic syndrome, and future trends

Postbiotics are defined as "preparation of inanimate microorganisms and/or their components that confers a health benefit on the host". Postbiotics have unique advantages over probiotics, such as stability, safety, and wide application. Although postbiotics are research hotspots, the research on them is still very limited. This review provides comprehensive information on the scope of postbiotics, the preparation methods of inanimate microorganisms, and the application and mechanisms of postbiotics in metabolic syndrome (MetS). Furthermore, the application trends of postbiotics in the food industry are reviewed. It was found that postbiotics mainly include inactivated microorganisms, microbial lysates, cell components, and metabolites. Thermal treatments are the main methods to prepare inanimate microorganisms as postbiotics, while non-thermal treatments, such as ionizing radiation, ultraviolet light, ultrasound, and supercritical CO2, show great potential in postbiotic preparation. Postbiotics could ameliorate MetS through multiple pathways including the modulation of gut microbiota, the enhancement of intestinal barrier, the regulation of inflammation and immunity, and the modulation of hormone homeostasis. Additionally, postbiotics have great potential in the food industry as functional food supplements, food quality improvers, and food preservatives. In addition, the SWOT analyses showed that the development of postbiotics in the food industry exists both opportunities and challenges.

Use of citric acid and garlic extract to inhibit Salmonella enterica and Listeria monocytogenes in hummus

Recently, the consumption of hummus has become popular in the United States, European countries, and Canada, and unfortunately, several foodborne outbreaks and recalls have been reported due to its contamination with Listeria monocytogenes and Salmonella enterica. The current study aimed to investigate the inhibitory activity of 0.5, 1.0, and 1.5% citric acid (CA) and 1.0, 2.0 and 3.0% garlic extract (GE) toward S. enterica and L. monocytogenes in hummus stored at 4, 10 and 24 °C. L. monocytogenes grew well in untreated (control) hummus samples at all tested temperatures, whereas S. enterica grew only at 10 and 24 °C. CA at 0.5 to 1.5% reduced L. monocytogenes numbers by 3.0-3.3 log CFU/g at 4 °C, 1.7-3.9 log CFU/g at 10 °C, and 0.9-1.4 log CFU/g at 24 °C. Numbers of S. enterica were reduced by 0.6-1.7, 4.1-4.9 and <1.5 log CFU/g, at 4, 10 and 24 °C, respectively, compared to the control during 10 d storage. GE at 1.0-3.0% also reduced numbers of L. monocytogenes at 10 d by 0.7-3.0, and 1.3-3.6 log CFU/g at 4 and 10 °C, respectively, and numbers of S. enterica by 0.7-1.2, 1.8-2.6 and 0.5-1.6 log CFU/g, at 4, 10 and 24 °C, respectively, compared to the control. Chromatographic analysis of GE revealed the presence of four organosulfur compounds including diallyl disulfide, diallyl trisulfide, 2-vinyl-(4H)-1,3-dithiin and 3-vinyl-(4H)-1,2-dithiin where the latter was the predominant compound with a level of 22.9 mg/g which significantly contributed to the inhibitory effect of GE. CA and GE are adequate natural antimicrobials in hummus to reduce L. monocytogenes and S. enterica numbers and enhance product safety.

Guidance on validation of lethal control measures for foodborne pathogens in foods

Food manufacturers are required to obtain scientific and technical evidence that a control measure or combination of control measures is capable of reducing a significant hazard to an acceptable level that does not pose a public health risk under normal conditions of distribution and storage. A validation study provides evidence that a control measure is capable of controlling the identified hazard under a worst-case scenario for process and product parameters tested. It also defines the critical parameters that must be controlled, monitored, and verified during processing. This review document is intended as guidance for the food industry to support appropriate validation studies, and aims to limit methodological discrepancies in validation studies that can occur among food safety professionals, consultants, and third-party laboratories. The document describes product and process factors that are essential when designing a validation study, and gives selection criteria for identifying an appropriate target pathogen or surrogate organism for a food product and process validation. Guidance is provided for approaches to evaluate available microbiological data for the target pathogen or surrogate organism in the product type of interest that can serve as part of the weight of evidence to support a validation study. The document intends to help food manufacturers, processors, and food safety professionals to better understand, plan, and perform validation studies by offering an overview of the choices and key technical elements of a validation plan, the necessary preparations including assembling the validation team and establishing prerequisite programs, and the elements of a validation report.

Retention of polyphenols and vitamin C in cranberrybush purée (Viburnum opulus) by means of non-thermal treatments

The effects of high pressure processing (HPP; 200-600 MPa for 5 or 15 min) and pulsed electric field (PEF; 3 kV/cm, 5-15 kJ/kg) treatment on physicochemical properties (conductivity, pH and total soluble solids content), bioactive compounds (vitamin C, total phenolic (TPC), total flavonoid (TFC), total anthocyanin (TAC) and chlorogenic acid contents), antioxidant capacities (DPPH and CUPRAC assays) and polyphenol oxidase (PPO) activity of cranberrybush purée were evaluated immediately after processing. The results were compared to an untreated purée. According to the results, conductivity increased significantly after PEF (15 kJ/kg) treatment. PEF and HPP treatments resulted in a better retention of bioactive compounds (increase in TPC in the range of ~4-11% and ~10-14% and TFC in the range of ~1-5% and ~6-8% after HPP and PEF, respectively) and antioxidant activity (as measured with CUPRAC method) compared to untreated sample. HPP reduced residual enzyme activity of PPO comparatively better than PEF.

Effect of water activity on inactivation of Listeria monocytogenes using gaseous chlorine dioxide - A kinetic analysis

The aim of this study was to investigate the effect of water activity (a_w) on inactivation of Listeria monocytogenes using gaseous chlorine dioxide (ClO_{2 (g)}) under room temperature. Surface-inoculated tryptic soy agar (TSA) plates adjusted to 9 different water activity levels ranging from 0.994 to 0.429 were used as samples exposed to ClO_{2 (g)} at 150, 250, and 350 ppm for different durations of treatment time. Results showed that the antimicrobial effect of ClO_{2 (g)} significantly decreases as the a_w level and ClO_{2 (g)} concentration decrease. Nonlinear models, such as the modified Chick model and the Weibull model, were used to describe the inactivation kinetics of L. monocytogenes. The results showed that the modified Chick model, which is based on chemical reaction kinetics, was more suitable to describe the inactivation of L. monocytogenes (RMSE < 0.5 log CFU/g) than the Weibull model (RMSE < 1.0 log CFU/g). A multiple regression model was developed for the describing the effect of a_w and ClO_{2 (g)} concentration on bacterial inactivation. The results of this study may be used to design ClO_{2 (g)} treatment processes to inactivate L. monocytogenes in low-moisture foods.

Temperature and presence of ethanol affect accumulation of intracellular trehalose in Lactobacillus plantarum WCFS1 upon pulsed electric field treatment

Pulsed electric field (PEF) treatment can be used to increase intracellular small molecule concentrations in bacteria, which can lead to enhanced robustness of these cells during further processing. In this study we investigated the effects of the PEF treatment temperature and the presence of 8% (v/v) ethanol in the PEF medium on cell survival, membrane fluidity and intracellular trehalose concentrations of Lactobacillus plantarum WCFS1. A moderate PEF treatment temperature of 21 °C resulted in a high cell survival combined with higher intracellular trehalose concentrations compared to a treatment at 10 and 35 °C. Interestingly, highest intracellular trehalose concentrations were observed upon supplementing the PEF medium with 8% ethanol, which resulted in more than a doubling in intracellular trehalose concentrations, while culture survival was retained. Overall, this study shows that treatment temperature and PEF medium optimization are important directions for improving molecule uptake upon PEF processing.

Pulsed electric field-assisted extraction of valuable compounds from microorganisms

Microorganisms (bacteria, yeast, and microalgae) are a promising resource for products of high value such as nutrients, pigments, and enzymes. The majority of these compounds of interest remain inside the cell, thus making it necessary to extract and purify them before use. This review presents the challenges and opportunities in the production of these compounds, the microbial structure and the location of target compounds in the cells, the different procedures proposed for improving extraction of these compounds, and pulsed electric field (PEF)-assisted extraction as alternative to these procedures. PEF is a nonthermal technology that produces a precise action on the cytoplasmic membrane improving the selective release of intracellular compounds while avoiding undesirable consequences of heating on the characteristics and purity of the extracts. PEF pretreatment with low energetic requirements allows for high extraction yields. However, PEF parameters should be tailored to each microbial cell, according to their structure, size, and other factors affecting efficiency. Furthermore, the recent discovery of the triggering effect of enzymatic activity during cell incubation after electroporation opens up the possibility of new implementations of PEF for the recovery of compounds that are bounded or assembled in structures. Similarly, PEF parameters and suspension storage conditions need to be optimized to reach the desired effect. PEF can be applied in continuous flow and is adaptable to industrial equipment, making it feasible for scale-up to large processing capacities.

Reversibility of membrane permeabilization upon pulsed electric field treatment in Lactobacillus plantarum WCFS1

Pulsed electric field (PEF) treatment, or electroporation, can be used to load molecules into cells. The permeabilizing effect of the PEF treatment on the cellular membrane can be either reversible or irreversible depending on the severity of the PEF treatment conditions. The influence of PEF on the reversibility of membrane permeabilization in Lactobacillus plantarum WCFS1 by two different fluorescent staining methods was investigated in this study. Whereas staining with propidium iodide (PI) before and after PEF treatment indicated small reversible permeabilized fractions of maximum 14%, the use of a double staining method with PI and SYTOX Green suggested larger reversible permeabilized fractions up to 40% of the population. This difference shows that the choice for a fluorescent staining method affects the conclusions drawn regarding reversibility of membrane permeabilization. Additionally, the effect of PEF treatment conditions on membrane integrity was compared, indicating a relation between critical electric field strength, cell size and membrane permeabilization. Overall this study showed the possibilities and limitations of fluorescent membrane integrity staining methods for PEF studies.

Antimicrobial efficacy of Lippia citriodora natural extract against Escherichia coli and Enterococcus faecalis in "Piel de Sapo" melon juice

BACKGROUND

The minimal inhibitory concentration (MIC) of an aqueous extract of Lippia citriodora with reported functional properties (PLX®) was determined on two strains of Escherichia coli (E. coli) belonging to serogroups commonly associated with foodborne illnesses (E. coli O157:H7 ATCC 700728 and E. coli O111 isolate 172) in vegetable products and two control strains for antimicrobial tests assays (E. coli ATCC 25922 and Enterococcus-En. faecalis ATCC 29212).

RESULTS

Mean MIC values at standard pH (7.4) in broth for the E. coli strains tested ranged from 4,444 µg/ml (35ºC) to 1,250 µg/ml (10ºC) and to 182 µg/ml (4ºC). At pH 5.5, conditions resembling those of melon juice, MIC was about 2 times higher at 35 and 10ºC compared with 4ºC. The MIC of En. faecalis was similar or slightly lower than those of E. coli at the conditions tested. In melon juice fortified with PLX® (2,500 µg/ml, maximum sensorial acceptable limit), the three strains of E. coli maintained their viability although none showed growth potential after 4 days at 4ºC.

CONCLUSIONS

PLX® could be added to melon juice to control E. coli O157:H7 and E. coli O111 during refrigerated storage, reducing the risk of microbiological contamination in this food.

Inactivation of Rhizoctonia solani in fertigation water using regenerative in situ electrochemical hypochlorination

The capture and re-use of greenhouse fertigation water is an efficient use of fertilizer and limited water resources, although the practice is not without risk. Plant pathogens and chemical contaminants can build up over successive capture and re-use cycles; if not properly managed they can lead to reduced productivity or crop loss. There are numerous established and emerging water treatment technologies available to treat fertigation water. Electrochemical processes are emerging as effective means for controlling pathogens via in situ regenerative hypochlorination; a process that is demonstrated here to achieve pathogen control in fertigation solutions without leading to the accumulation of potentially phytotoxic free chlorine residuals associated with other chlorination processes. An electrochemical flow cell (EFC) outfitted with ruthenium dioxide (RuO2) dimensionally stable anodes (DSA) was characterized and evaluated for free chlorine production and Rhizoctonia solani inactivation in both irrigation and fertigation solutions. Pathogen inactivation was achieved at low current densities and short residence or cell contact times. Effluent free chlorine concentrations were significantly lower than commonly reported phytotoxic threshold values (approximately 2.5 mg/L) when fertilizer (containing ammonium) was present in the test solution; an effect attributable to reactions associated with breakpoint chlorination, including chloramine formation, as well as the presence of other oxidizable compounds in the fertilizer. Chloride concentrations were stable under the test conditions suggesting that the EFC was operating as a regenerative in situ electrochemical hypochlorination system. No significant changes to macronutrient concentrations were found following passage through the EFC.

Heat-Assisted Pulsed Electric Field Treatment for the Inactivation of Saccharomyces cerevisiae: Effects of the Presence of Citral

Pulsed electric field (PEF) treatment is a non-thermal technology that has shown good potential for microbial inactivation. However, in many cases, it cannot be sufficient to avoid microbial proliferation, and the combination with other stabilizing technologies is needed. In the framework of the hurdle concept, several researches have been focused on the use of PEF in combination with heat and/or antimicrobials to increase its efficacy. This study investigated the inactivation effect of PEF on a strain of Saccharomyces cerevisiae (isolated from spoiled beverages) in a model system (growth medium). The efficacy of PEF treatment was evaluated in relation to different variables, such as electric field strength (25 and 50 kV/cm), treatment time (from 1 to 5 s), initial inoculum level (4 or 6 log cfu/ml), preheating at 50°C, medium pH (4 or 6), and addition of citral at sublethal concentration (i.e., half of minimum inhibiting concentration). The data from plate counting, modeled with the Weibull equation, showed that one of the main factors affecting yeast inactivation was the preheating of the suspension at 50°C. Indeed, higher cell load reductions were obtained with heat-assisted PEF, especially in the presence of citral. The effect of initial cell load was negligible, while pH affected yeast inactivation only without preheating, with higher death kinetics at pH 6. Flow cytometry (FCM) analysis confirmed higher mortality under these conditions. However, the occurrence of injured cells, especially in samples treated at pH 4, was observed. The ability of these cells to recover from the damages induced by treatments was affected by both citral and preheating. The synergic effects of PEF, preheating, and citral were likely due to the increase of membrane permeability (especially at pH 6), as the primary target of electroporation, which favored the solubilization of citral in the cell membrane, enhancing the efficacy of the whole process. The multi-analytical approach (traditional plate counting and FCM) allowed defining parameters to increase PEF efficacy against S. cerevisiae. Moreover, FCM, able to discriminate different physiological states of the yeast population, was helpful to better clarify the action mechanism and the potential recovery of cells after treatment.

Stabilisation microbiologique des vins par utilisation de champs électriques pulsés

For more than ten years, pulsed electric field (PEF) technology has been the subject of a growing number of publications and patents. The technology previously reserved for laboratories is becoming more and more popular and is now a success in the food industry. Since 2015, with the help of the Occitania region, we have been studying the use of the PEF on the microbiological stability of wines on a semi-industrial scale from 5 to 12 hl/hour. This low thermal and energy consuming physical technology requires no inputs to ensure the destruction of microorganisms and microbial stabilization of wines. These tests are performed with a 7 kV/cm electric field generated between the 2 electrodes of the treatment chambers. The objective is to ensure the microbial stabilisation of wines not exceeding 50 ∘C and to cool the wine immediately after treatment without maintaining it at high temperature. The study of the effectiveness of PEF on yeast destruction is carried out during the mutage of sweet wines. The first results obtained show a very good efficiency of the yeast treatment with an instant cessation of alcoholic fermentation and a decrease in the yeast population ranging from − 3 to − 5 Log. No SO2 addition is then required. On wines contaminated by Brettanomyces, the tests show an almost total elimination (< 1/100 ml) of these yeasts by the PEF treatment. These tests also showed that a higher energy level is required to eliminate all lactic acid bacteria from wine. No effects on the physico-chemical characteristics of the wines were found. The impact on the organoleptic characteristics of wines is ongoing. An optimization of the electrical parameters is still necessary.

Pulsed electric fields accelerate release of mannoproteins from Saccharomyces cerevisiae during aging on the lees of Chardonnay wine

The potential of PEF for triggering autolysis of Saccharomyces cerevisiae and accelerating the release of mannoproteins during aging on the lees of Chardonnay wine was evaluated. Release of mannoproteins in Chardonnay wine increased drastically in samples containing PEF-treated (5 and 10 kV/cm, 75 μs) yeasts. No mannoprotein release was observed in the first seven days of aging on the lees in wine containing untreated yeast; however, after the same time interval, the concentration of those compounds increased by 40 and 60% in wines containing yeast treated by PEF at 5 and 10 kV/cm, respectively. After 30 days of incubation, the mannoprotein concentration in wines containing yeast treated under the most intense PEF conditions reached the maximum value. Control cells, on the other hand, required six months to reach that maximum level. Chromatic characteristics, total polyphenol index, total volatile acidity, pH, ethanol, and CIELAB parameters of the wine were not affected during aging on the lees with untreated and PEF-treated yeast. On the other hand, the capability of the mannoproteins released from yeast treated by PEF for decreasing wine turbidity, foaming, and interacting with tannins was similar to that of those released from untreated yeast; the differences observed were a consequence of the varying concentration of mannoproteins. The result obtained demonstrates that PEF permits the acceleration of the aging-on-lees step while avoiding or reducing the problems associated with it. To achieve this effect, intense treatment is not required. Therefore, wineries could process lees by using the most economical PEF devices on the market.

The Use of Malic and Acetic Acids in Washing Solution to Control Salmonella spp. on Chicken Breast

Salmonella is a persisting contaminant in poultry products that may pose a potential risk to consumers. Thus, developing decontamination strategies to eliminate or reduce this pathogen in chicken is crucial. The objective of the current study was to investigate the antimicrobial activity of malic acid (MA) and acetic acid (AA) or their combination against Salmonella on chicken breast at 4 °C for 10 days. The effect of storage temperature (4 and 21 °C) on Salmonella inactivation was also investigated for up to 21 days. Five serovars of Salmonella were inoculated in a model Mueller-Hinton (MH) broth system to a level of about 7 log₁₀ CFU/mL and the broth was treated with 5 mg/mL of each of MA, AA or their combination. AA was more effective than MA in the model system at 21 °C, where it resulted in total elimination of Salmonella, but MA was more effective in eliminating Salmonella at 4 °C. However, the combined MA and AA solutions were more effective than either MA or AA alone. When applying washing solutions containing 5 mg/mL of either of MA, AA, or their combination to chicken breast inoculated with about 5 log₁₀ CFU/g, the MA+AA washing solution was the most effective. It resulted in complete elimination of Salmonella from chicken breast and rendered a significant reduction in mesophilic aerobic bacteria and lactic acid bacteria numbers.

PRACTICAL APPLICATION

This study indicates that the use of a washing solution containing MA and AA could improve the safety and extend the shelf life of raw chicken by substantially reducing Salmonella and contaminating microflora on the product.

Mechanisms of inactivation of Candida humilis and Saccharomyces cerevisiae by pulsed electric fields

AIMS

This study aimed to determine how electric field strength, pulse width and shape, and specific energy input relate to the effect of pulsed electric fields (PEF) on viability and membrane permeabilization in Candida humilis and Saccharomyces cerevisiae suspended in potassium phosphate buffer.

METHODS AND RESULTS

Cells were treated with a micro-scale system with parallel plate electrodes. Propidium iodide was added before or after treatments to differentiate between reversible and irreversible membrane permeabilization. Treatments of C. humilis with 71kV/cm and 48kJ/kg reduced cell counts by 3.9±0.6 log (cfu/mL). Pulse shape or width had only a small influence on the treatment lethality. Variation of electric field strength (17-71kV/cm), pulse width (0.086-4μs), and specific energy input (8-46kJ/kg) demonstrated that specific energy input correlated to the membrane permeabilization (r²=0.84), while other parameters were uncorrelated. A minimum energy input of 3 and 12kJ/kg was required to achieve reversible membrane permeabilization and a reduction of cell counts, respectively, of C. humilis.

CONCLUSIONS

Energy input was the parameter that best described the inactivation efficiency of PEF.

SIGNIFICANCE AND IMPACT OF STUDY

This study is an important step to identify key process parameters and to facilitate process design for improved cost-effectiveness of commercial PEF treatment.

Effect of Pulsed Electric Field on Membrane Lipids and Oxidative Injury of Salmonella typhimurium

Salmonella typhimurium cells were subjected to pulsed electric field (PEF) treatment at 25 kV/cm for 0–4 ms to investigate the effect of PEF on the cytoplasmic membrane lipids and oxidative injury of cells. Results indicated that PEF treatment induced a decrease of membrane fluidity of Salmonella typhimurium (S. typhimuriumi), possibly due to the alterations of fatty acid biosynthesis-associated gene expressions (down-regulation of cfa and fabA gene expressions and the up-regulation of fabD gene expression), which, in turn, modified the composition of membrane lipid (decrease in the content ratio of unsaturated fatty acids to saturated fatty acids). In addition, oxidative injury induced by PEF treatment was associated with an increase in the content of malondialdehyde. The up-regulation of cytochrome bo oxidase gene expressions (cyoA, cyoB, and cyoC) indicated that membrane damage was induced by PEF treatment, which was related to the repairing mechanism of alleviating the oxidative injury caused by PEF treatment. Based on these results, we achieved better understanding of microbial injury induced by PEF, suggesting that micro-organisms tend to decrease membrane fluidity in response to PEF treatment and, thus, a greater membrane fluidity might improve the efficiency of PEF treatment to inactivate micro-organisms.

Comparative Resistance of Bacterial Foodborne Pathogens to Non-thermal Technologies for Food Preservation

In this paper the resistance of bacterial foodborne pathogens to manosonication (MS), pulsed electric fields (PEFs), high hydrostatic pressure (HHP), and UV-light (UV) is reviewed and compared. The influence of different factors on the resistance of bacterial foodborne pathogens to these technologies is also compared and discussed. Only results obtained under harmonized experimental conditions have been considered. This has allowed us to establish meaningful comparisons and draw significant conclusions. Among the six microorganisms here considered, Staphyloccocus aureus is the most resistant foodborne pathogen to MS and HHP and Listeria monocytogenes to UV. The target microorganism of PEF would change depending on the treatment medium pH. Thus, L. monocytogenes is the most PEF resistant microorganism at neutral pH but Gram-negatives (Escherichia coli, Salmonella spp., Cronobacter sakazakii, Campylobacter jejuni) would display a similar or even higher resistance at acidic pH. It should be noted that, in acidic products, the baroresistance of some E. coli strains would be comparable to that of S. aureus. The factors affecting the resistance of bacterial foodborne pathogens, as well as the magnitude of the effect, varied depending on the technology considered. Inter- and intra-specific differences in microbial resistance to PEF and HHP are much greater than to MS and UV. Similarly, both the pH and aw of the treatment medium highly condition microbial resistance to PEF and HHP but no to MS or UV. Growth phase also drastically affected bacterial HHP resistance. Regarding UV, the optical properties of the medium are, by far, the most influential factor affecting its lethal efficacy. Finally, increasing treatment temperature leads to a significant increase in lethality of the four technologies, what opens the possibility of the development of combined processes including heat. The appearance of sublethally damaged cells following PEF and HHP treatments could also be exploited in order to design combined processes. Further work would be required in order to fully elucidate the mechanisms of action of these technologies and to exhaustively characterize the influence of all the factors acting before, during, and after treatment. This would be very useful in the areas of process optimization and combined process design.

Cold plasma treatment for the microbiological safety of cabbage, lettuce, and dried figs

Microwave-powered cold plasma treatment (CPT) was evaluated as a means to improve the microbiological safety of fresh vegetables and dried fruits. The CPT at 900 W, conducted for 10 min using nitrogen as a plasma-forming gas, inactivated Salmonella Typhimurium inoculated on cabbage and lettuce by approximately 1.5 log CFU/g. The CPT at 400-900 W and 667 Pa, conducted for 1-10 min using a helium-oxygen gas mixture, inactivated Listeria monocytogenes on cabbage by 0.3-2.1 log CFU/g in a time-dependent manner (P < 0.05). The Weibull model adequately described the inactivation of L. monocytogenes on cabbage by CPT. The CPT at the optimum conditions of treatment power (400 W) and time (10 min) inactivated L. monocytogenes on lettuce by 1.8 ± 0.2 log CFU/g. As the water activity of the dried figs increased from 0.70 to 0.93, the reductions in numbers of Escherichia coli O157:H7 and L. monocytogenes on figs increased from 0.5 to 1.3 log CFU/g and from 1.0 to 1.6 log CFU/g, respectively. The microbial inactivation by CPT increased synergistically when the pH of the figs was reduced from 6 to 4. CTPs have potential application to increase the microbiological safety of vegetables and dried fruits.