Generating new ligand-binding RNAs by affinity maturation and disintegration of allosteric ribozymes

Engineering Allosteric Ribozymes to Detect Thiamine Pyrophosphate in Whole Blood

Thiamine deficiency contributes to several human diseases including Alzheimer's. As its biologically active form, thiamine pyrophosphate (TPP) has been considered as a potential biomarker for Alzheimer's disease (AD) based on several clinical reports that apparently lower blood TPP levels were found in patients with mild cognitive impairment to AD. However, highly sensitive and high-throughput detection of TPP in biological fluids remains an analytical challenge. Here, we report engineering RNA-based sensors to quantitatively measure TPP concentrations in whole blood samples with a detection limit down to a few nM. By fusing a TPP-specific aptamer with the hammerhead ribozyme for in vitro selection, we isolated an allosteric ribozyme with an EC₅₀ value (68 nM) similar to the aptamer's K_D value (50 nM) for TPP, which for the first time demonstrates the possibility to maintain the effector binding affinity of the aptamer in such engineered allosteric RNA constructs. Meanwhile, we developed a new blood sample preparation protocol to be compatible with RNA. By coupling the TPP-induced ribozyme cleavage event with isothermal amplification, we achieved fluorescence monitoring of whole blood TPP levels through the "mix-and-read" operation with high-throughput potential. We expect that the engineered TPP-sensing RNAs will facilitate clinical research on AD as well as other thiamine-related diseases.

A rare bacterial RNA motif is implicated in the regulation of the purF gene whose encoded enzyme synthesizes phosphoribosylamine

The Fibro-purF motif is a putative structured noncoding RNA domain that was discovered previously in species of Fibrobacter by using comparative sequence analysis methods. An updated bioinformatics search yielded a total of only 30 unique-sequence representatives, exclusively found upstream of the purF gene that codes for the enzyme amidophosphoribosyltransferase. This enzyme synthesizes the compound 5-phospho-D-ribosylamine (PRA), which is the first committed step in purine biosynthesis. The consensus model for Fibro-purF motif RNAs includes a predicted three-stem junction that carries numerous conserved nucleotide positions within the regions joining the stems. This architecture appears to be of sufficient size and complexity for the formation of the ligand-binding aptamer portion of a riboswitch. In this study, we conducted biochemical analyses of a representative Fibro-purF motif RNA to confirm that the RNA generally folds according to the predicted consensus model. However, due to the instability of PRA, binding of this ligand candidate by the RNA could not be directly assessed. Genetic analyses were used to demonstrate that Fibro-purF motif RNAs regulate gene expression in accordance with predicted PRA concentrations. These findings indicate that Fibro-purF motif RNAs are genetic regulation elements that likely suppress PRA biosynthesis when sufficient levels of this purine precursor are present.

Evaluating riboswitch optimality

Riboswitches are RNA elements that recognize diverse chemical and biomolecular inputs, and transduce this recognition process to genetic, fluorescent, and other engineered outputs using RNA conformational changes. These systems are pervasive in cellular biology and are a promising biotechnology with applications in genetic regulation and biosensing. Here, we derive a simple expression bounding the activation ratio-the proportion of RNA in the active vs. inactive states-for both ON and OFF riboswitches that operate near thermodynamic equilibrium: 1+[I]/K_d^I, where [I] is the input ligand concentration and K_d^I is the intrinsic dissociation constant of the aptamer module toward the input ligand. A survey of published studies of natural and synthetic riboswitches confirms that the vast majority of empirically measured activation ratios have remained well below this thermodynamic limit. A few natural and synthetic riboswitches achieve activation ratios close to the limit, and these molecules highlight important principles for achieving high riboswitch performance. For several applications, including "light-up" fluorescent sensors and chemically-controlled CRISPR/Cas complexes, the thermodynamic limit has not yet been achieved, suggesting that current tools are operating at suboptimal efficiencies. Future riboswitch studies will benefit from comparing observed activation ratios to this simple expression for the optimal activation ratio. We present experimental and computational suggestions for how to make these quantitative comparisons and suggest new molecular mechanisms that may allow non-equilibrium riboswitches to surpass the derived limit.

Riboswitches: From living biosensors to novel targets of antibiotics

Riboswitches are generally located in 5'-UTR region of mRNAs and specifically bind small ligands. Following ligand binding, gene expression is controlled mostly by transcription termination, translation inhibition or mRNA degradation processes. More than 30 classes of known riboswitches have been identified by now. Most riboswitches consist of an aptamer domain and an expression platform. The aptamer domain of each class of riboswitch is a conserved structure and stabilizes specific structures of the expression platforms through binding to specific compounds. In this review, we are highlighting most aspects of riboswitch research including the novel riboswitch discoveries, routine methods for discovering and investigating riboswitches along with newly discovered classes and mechanistic principles of riboswitch-mediated gene expression control. Moreover, we will give an overview about the potential of riboswitches as therapeutic targets for antibiotic design and also their utilization as biosensors for molecular detection.

Computational analysis of riboswitch-based regulation

Advances in computational analysis of riboswitches in the last decade have contributed greatly to our understanding of riboswitch regulatory roles and mechanisms. Riboswitches were originally discovered as part of the sequence analysis of the 5'-untranslated region of mRNAs in the hope of finding novel gene regulatory sites, and the existence of structural RNAs appeared to be a spurious phenomenon. As more riboswitches were discovered, they illustrated the diversity and adaptability of these RNA regulatory sequences. The fact that a chemically monotonous molecule like RNA can discern a wide range of substrates and exert a variety of regulatory mechanisms was subsequently demonstrated in diverse genomes and has hastened the development of sophisticated algorithms for their analysis and prediction. In this review, we focus on some of the computational tools for riboswitch detection and secondary structure prediction. The study of this simple yet efficient form of gene regulation promises to provide a more complete picture of a world that RNA once dominated and allows rational design of artificial riboswitches. This article is part of a Special Issue entitled: Riboswitches.

Diversity of cobalamin riboswitches in the corrinoid-producing organohalide respirer Desulfitobacterium hafniense

The strategic adaptation of prokaryotes in polluted niches involves the efficient regulation of their metabolism. The obligate anaerobe and metabolically versatile Desulfitobacterium hafniense reductively dechlorinates halogenated organic compounds (so-called organohalides). Some D. hafniense strains carry out organohalide respiration (OHR), a process which requires the use of corrinoid as a cofactor in reductive dehalogenases, the key enzymes in OHR. We report here the diversity of the cobalamin riboswitches that possibly regulate the corrinoid metabolism for D. hafniense. The analysis of available D. hafniense genomes indicates the presence of 18 cobalamin riboswitches located upstream of genes whose products are mainly involved in corrinoid biosynthesis and transport. To obtain insight into their function, the secondary structures of three of these RNA elements were predicted by Mfold, as well as analyzed by in-line probing. These RNA elements both display diversity in their structural elements and exhibit various affinities toward adenosylcobalamin that possibly relates to their role in the regulation of corrinoid metabolism. Furthermore, adenosylcobalamin-induced in vivo repression of RNA synthesis of the downstream located genes indicates that the corrinoid transporters and biosynthetic enzymes in D. hafniense strain TCE1 are regulated at the transcriptional level. Taken together, the riboswitch-mediated regulation of the complex corrinoid metabolism in D. hafniense could be of crucial significance in environments polluted with organohalides both to monitor their intracellular corrinoid level and to coexist with corrinoid-auxotroph OHR bacteria.

Fluorescence imaging of cellular metabolites with RNA

Genetically encoded sensors are powerful tools for imaging intracellular metabolites and signaling molecules. However, developing sensors is challenging because they require proteins that undergo conformational changes upon binding the desired target molecule. We describe an approach for generating fluorescent sensors based on Spinach, an RNA sequence that binds and activates the fluorescence of a small-molecule fluorophore. We show that these sensors can detect a variety of different small molecules in vitro and in living cells. These RNAs constitute a versatile approach for fluorescence imaging of small molecules and have the potential to detect essentially any cellular biomolecule.

Engineered allosteric ribozymes that sense the bacterial second messenger cyclic diguanosyl 5'-monophosphate

A series of allosteric ribozymes that respond to the bacterial second messenger cyclic diguanosyl-5'-monophosphate (c-di-GMP) have been created by using in vitro selection. An RNA library was generated by using random-sequence bridges to join a hammerhead self-cleaving ribozyme to an aptamer from a natural c-di-GMP riboswitch. Specific bridge sequences, called communication modules, emerged through two in vitro selection efforts that either activate or inhibit ribozyme self-cleavage upon ligand binding to the aptamer. Representative RNAs were found that exhibit EC(50) (half-maximal effective concentration) values for c-di-GMP as low as 90 nM and IC(50) (half-maximal inhibitory concentration) values as low as 180 nM. The allosteric RNAs display molecular recognition characteristics that mimic the high discriminatory ability of the natural aptamer. Some engineered RNAs operate with ribozyme rate constants approaching that of the parent hammerhead ribozyme. By use of these allosteric ribozymes, cytoplasmic concentrations of c-di-GMP in three mutant strains of Escherichia coli were quantitatively estimated from cell lysates. Our findings demonstrate that engineered c-di-GMP-sensing ribozymes can be used as convenient tools to monitor c-di-GMP levels from complex biological or chemical samples. Moreover, these ribozymes could be employed in high-throughput screens to identify compounds that trigger c-di-GMP riboswitch function.

An aptazyme-based molecular device that converts a small-molecule input into an RNA output

We describe the construction of an aptazyme-based molecular device that converts, through a cascade of reactions, a small-molecule input into output RNA strands. This device is applicable as an interface between a small molecule and a molecular system that accepts only nucleic acid input.

The condensed chromatin fiber: an allosteric chemo-mechanical machine for signal transduction and genome processing

Allostery is a key concept of molecular biology which refers to the control of an enzyme activity by an effector molecule binding the enzyme at another site rather than the active site (allos = other in Greek). We revisit here allostery in the context of chromatin and argue that allosteric principles underlie and explain the functional architecture required for spacetime coordination of gene expression at all scales from DNA to the whole chromosome. We further suggest that this functional architecture is provided by the chromatin fiber itself. The structural, mechanical and topological features of the chromatin fiber endow chromosomes with a tunable signal transduction from specific (or nonspecific) effectors to specific (or nonspecific) active sites. Mechanical constraints can travel along the fiber all the better since the fiber is more compact and regular, which speaks in favor of the actual existence of the (so-called 30 nm) chromatin fiber. Chromatin fiber allostery reconciles both the physical and biochemical approaches of chromatin. We illustrate this view with two supporting specific examples. Moreover, from a methodological point of view, we suggest that the notion of chromatin fiber allostery is particularly relevant for systemic approaches. Finally we discuss the evolutionary power of allostery in the context of chromatin and its relation to modularity.

Designed nucleotide binding motifs

Gaps in the central strand of oligonucleotide triplexes bind nucleoside phosphates tightly. Watson-Crick and Hoogsteen base pairing as design principle yield motifs with high affinity for nucleoside phosphates with A or G as nucleobase, including ATP. The second messenger 3',5'-cAMP is bound with nanomolar affinity. A designed DNA motif accommodates seven nucleotides at a time. The design was implemented for both DNA and RNA.

Recent advances in recognition elements of food and environmental biosensors: a review

A sensitive monitoring of contaminants in food and environment, such as chemical compounds, toxins and pathogens, is essential to assess and avoid risks for both, human and environmental health. To accomplish this, there is a high need for sensitive, robust and cost-effective biosensors that make real time and in situ monitoring possible. Due to their high sensitivity, selectivity and versatility, affinity-based biosensors are interesting for monitoring contaminants in food and environment. Antibodies have long been the most popular affinity-based recognition elements, however recently a lot of research effort has been dedicated to the development of novel recognition elements with improved characteristics, like specificity, stability and cost-efficiency. This review discusses three of these innovative affinity-based recognition elements, namely, phages, nucleic acids and molecular imprinted polymers and gives an overview of biosensors for food and environmental applications where these novel affinity-based recognition elements are applied.

Design and antimicrobial action of purine analogues that bind Guanine riboswitches

Riboswitches are structured RNA domains that can bind directly to specific ligands and regulate gene expression. These RNA elements are located most commonly within the noncoding regions of bacterial mRNAs, although representatives of one riboswitch class have been discovered in organisms from all three domains of life. In several Gram-positive species of bacteria, riboswitches that selectively recognize guanine regulate the expression of genes involved in purine biosynthesis and transport. Because these genes are involved in fundamental metabolic pathways in certain bacterial pathogens, guanine-binding riboswitches may be targets for the development of novel antibacterial compounds. To explore this possibility, the atomic-resolution structure of a guanine riboswitch aptamer from Bacillus subtilis was used to guide the design of several riboswitch-compatible guanine analogues. The ability of these compounds to be bound by the riboswitch and repress bacterial growth was examined. Many of these rationally designed compounds are bound by a guanine riboswitch aptamer in vitro with affinities comparable to that of the natural ligand, and several also inhibit bacterial growth. We found that one of these antimicrobial guanine analogues (6-N-hydroxylaminopurine, or G7) represses expression of a reporter gene controlled by a guanine riboswitch in B. subtilis, suggesting it may inhibit bacterial growth by triggering guanine riboswitch action. These studies demonstrate the utility of a three-dimensional structure model of a natural aptamer to design ligand analogues that target riboswitches. This approach also could be implemented to design antibacterial compounds that specifically target other riboswitch classes.

A variant riboswitch aptamer class for S-adenosylmethionine common in marine bacteria

Riboswitches that sense S-adenosylmethionine (SAM) are widely distributed throughout a variety of bacterial lineages. Four classes of SAM-binding riboswitches have been reported to date, constituting the most diverse collection of riboswitch classes that sense the same compound. Three of these classes, termed SAM-I, SAM-II, and SAM-III represent unique structures that form distinct binding pockets for the ligand. SAM-IV riboswitches carry different conserved sequence and structural features compared to other SAM riboswitches, but nucleotides and substructures corresponding to the ligand binding pocket are identical to SAM-I aptamers. In this article, we describe a fifth class of SAM binding aptamer, which we have termed SAM-V. SAM-V was discovered by analyzing GC-rich intergenic regions preceding metabolic genes in the marine alpha-proteobacterium "Candidatus Pelagibacter ubique." Although the motif is nearly unrepresented in cultured bacteria whose genomes have been completely sequenced, SAM-V is prevalent in marine metagenomic sequences. The consensus sequence and structure of SAM-V show some similarities to that of the SAM-II riboswitch, and it is likely that the two aptamers form similar ligand binding pockets. In addition, we identified numerous examples of a tandem SAM-II/SAM-V aptamer architecture. In this arrangement, the SAM-II aptamer is always positioned 5' of the SAM-V aptamer and the SAM-II aptamer is followed by a predicted intrinsic transcription terminator stem. The SAM-V aptamer, however, appears to use a ribosome binding site occlusion mechanism for genetic regulation. This tandem riboswitch arrangement exhibits an architecture that can potentially control both the transcriptional and translational stages of gene expression.

Engineering ligand-responsive gene-control elements: lessons learned from natural riboswitches

In the last two decades, remarkable advances have been made in the development of technologies used to engineer new aptamers and ribozymes. This has encouraged interest among researchers who seek to create new types of gene-control systems that can be made to respond specifically to small-molecule signals. Validation of the fact that RNA molecules can exhibit the characteristics needed to serve as precision genetic switches has come from the discovery of numerous classes of natural ligand-sensing RNAs called riboswitches. Although a great deal of progress has been made toward engineering useful designer riboswitches, considerable advances are needed before the performance characteristics of these RNAs match those of protein systems that have been co-opted to regulate gene expression. In this review, we will evaluate the potential for engineered RNAs to regulate gene expression and lay out possible paths to designer riboswitches based on currently available technologies. Furthermore, we will discuss some technical advances that would empower RNA engineers who seek to make routine the production of designer riboswitches that can function in eukaryotes.

Easy design of logic gates based on aptazymes and noncrosslinking gold nanoparticle aggregation

We have developed an easy method for constructing aptazyme-based logic gates using noncrosslinking gold nanoparticle aggregation.

In vitro selection of glmS ribozymes

Riboswitches modulate gene expression in eubacteria and eukaryotes in response to changing concentrations of small molecule metabolites. In most examples studied to date, riboswitches achieve both metabolite sensing and gene control functions without the obligate involvement of protein factors. These findings validate the hypothesis that RNA molecules could be engineered to function as designer gene control elements that sense and respond to different ligands. We believe that reverse engineering natural riboswitches could provide an intellectual foundation for those who wish to build synthetic riboswitches. Also, natural riboswitches might serve as starting points for efforts to change ligand specificity or gene control function through mutation and selection in vitro. In this chapter, we describe how in vitro selection can be used to create variant glmS ribozymes. Additionally, we discuss how these techniques can be extended to other riboswitch classes.

Assay for glucosamine 6-phosphate using a ligand-activated ribozyme with fluorescence resonance energy transfer or CE-laser-induced fluorescence detection

A naturally occurring aptazyme, the glmS ribozyme, is adapted to an assay for glucosamine 6-phosphate, an effector molecule for the aptazyme. In the assay, binding of analyte allosterically activates aptazyme to cleave a fluorescently labeled oligonucleotide substrate. The extent of reaction, and hence analyte concentration, is detected by either fluorescence resonance energy transfer (FRET) or capillary electrophoresis with laser-induced fluorescence (CE-LIF). With FRET, assay signal is the rate of increase in FRET in presence of analyte. With CE-LIF, the assay signal is the peak height of cleavage product formed after a fixed incubation time. The assay has a linear response up to 100 (CE-LIF) or 500 microM (FRET) and detection limit of approximately 500 nM for glucosamine 6-phosphate under single-turnover conditions. When substrate is present in excess of the aptazyme, it is possible to amplify the signal by multiple turnovers to achieve a 13-fold improvement in sensitivity and detection limit of 50 nM. Successful signal amplification requires a temperature cycle to alternately dissociate cleaved substrate and allow fresh substrate to bind aptazyme. The results show that aptazymes have potential utility as analytical reagents for quantification of effector molecules.

The corrin moiety of coenzyme B12 is the determinant for switching the btuB riboswitch of E. coli

Riboswitches are regulatory elements in the 5'-untranslated region (5'-UTR) of bacterial mRNAs that bind certain metabolites with high specificity and affinity. The 202 nucleotide (nt)-long btuB riboswitch RNA of E. coli interacts specifically with coenzyme B12 and its derivatives thereby leading to changes in the RNA structure and hence to an altered expression of the downstream btuB gene. We report the investigations of the rearrangement of the three-dimensional structure of the btuB riboswitch upon binding to four different B12 derivatives: coenzyme B12, vitamin B12, adenosyl factor A and adenosyl-cobinamide. In-line probing experiments have shown that the corrin ring plays the crucial role in switching the three-dimensional riboswitch structure. Instead, the apical ligands influence only the binding affinity of the B12 derivative to the btuB riboswitch.

Riboswitches that sense S-adenosylmethionine and S-adenosylhomocysteine

Numerous riboswitches have been discovered that specifically recognize metabolites and modulate gene expression. Each riboswitch class is defined either by the consensus sequence and structural features of its metabolite-binding aptamer domain, or by the distinct metabolite that the aptamer recognizes. Several distinct classes of riboswitches that respond to S-adenosylmethionine (SAM or AdoMet) have been discovered. Representatives of these classes have been shown to strongly discriminate against S-adenosylhomocystenine (SAH or AdoHcy), which is the metabolic byproduct produced when SAM is used as a cofactor for methylation reactions. However, a distinct class of riboswitches that selectively binds SAH, and strongly discriminates against SAM, also has been discovered. Herein we compare the features of SAM and SAH riboswitches, which help showcase the enormous structural diversity that RNA can harness to form precision genetic switches for compounds that are critical for fundamental metabolic processes.

In vitro selection and characterization of cellulose-binding RNA aptamers using isothermal amplification

We sought to create new cellulose-binding RNA aptamers for use as modular components in the engineering of complex functional nucleic acids. We designed our in vitro selection strategy to incorporate self-sustained sequence replication (3SR), which is an isothermal nucleic acid amplification protocol that allows for the rapid amplification of RNAs with little manipulation. The best performing aptamer representative was chosen for reselection and further optimization. The aptamer exhibits robust binding of cellulose in both the powdered and paper form, but did not show any significant binding of closely related polysaccharides. The minimal cellulose-binding RNA aptamer also can be grafted onto other RNAs to permit the isolation of RNAs from complex biochemical mixtures via cellulose affinity chromatography. This was demonstrated by fusing the aptamer to a glmS ribozyme sequence, and selectively eluting ribozyme cleavage products from cellulose using glucosamine 6-phosphate to activate glmS ribozyme function.

In-line probing analysis of riboswitches

Riboswitches are intricate, metabolite-binding RNA structures found in the non-coding regions of mRNA. Allosteric changes in the riboswitch that are induced by metabolite binding are harnessed to control the genes of a variety of essential metabolic pathways in eubacteria and in some eukaryotes. In this chapter, we describe an RNA structure analysis technique called "in-line probing." This assay makes use of the natural instability of RNA to elucidate secondary structure characteristics and ligand-binding capabilities of riboswitches in an entirely protein-free manner. Although this method has most frequently been used to examine riboswitches, the structures of any RNAs can be examined using this technique.

Simple fluorescent sensors engineered with catalytic DNA 'MgZ' based on a non-classic allosteric design

Most NAE (nucleic acid enzyme) sensors are composed of an RNA-cleaving catalytic motif and an aptameric receptor. They operate by activating or repressing the catalytic activity of a relevant NAE through the conformational change in the aptamer upon target binding. To transduce a molecular recognition event to a fluorescence signal, a fluorophore-quencher pair is attached to opposite ends of the RNA substrate such that when the NAE cleaves the substrate, an increased level of fluorescence can be generated. However, almost all NAE sensors to date harbor either NAEs that cannot accommodate a fluorophore-quencher pair near the cleavage site or those that can accept such a modification but require divalent transition metal ions for catalysis. Therefore, the signaling magnitude and the versatility of current NAE sensors might not suffice for analytical and biological applications. Here we report an RNA-cleaving DNA enzyme, termed ‘MgZ’, which depends on Mg²⁺ for its activity and can accommodate bulky dye moieties next to the cleavage site. MgZ was created by in vitro selection. The selection scheme entailed acidic buffering and ethanol-based reaction stoppage to remove selfish DNAs. Characterization of MgZ revealed a three-way junction structure, a cleavage rate of 1 min⁻¹, and 26-fold fluorescence enhancement. Two ligand-responsive NAE sensors were rationally designed by linking an aptamer sequence to the substrate of MgZ. In the absence of the target, the aptamer-linked substrate is locked into a conformation that prohibits MgZ from accessing the substrate. In the presence of the target, the aptamer releases the substrate, which induces MgZ-mediated RNA cleavage. The discovery of MgZ and the introduction of the above NAE sensor design strategy should facilitate future efforts in sensor engineering.

L-arginine influences the structure and function of arginase mRNA in Aspergillus nidulans

Expression of the arginase structural gene (agaA) in Aspergillus nidulans is subject to complex transcriptional and post-transcriptional regulation. Arginase mRNA has a long 5'-UTR sequence. Analysis of this sequence in silico revealed its putative complex secondary structure, the presence of arginine-binding motifs (arginine aptamers) and a short intron with two potential 3' splicing sites. In this report we present evidence that L-arginine (i) binds directly to the arginase 5'-UTR; (ii) invokes drastic changes in the secondary structure of the 5'-UTR, unlike several other L-amino acids and D-arginine; and (iii) forces the selection of one of two 3' splice sites of an intron present in the 5'-UTR. We postulate that expression of the eukaryotic structural gene coding for arginase in A. nidulans is regulated at the level of mRNA stability, depending on riboswitch-mediated alternative splicing of the 5'-UTR intron.

Ligand binding and gene control characteristics of tandem riboswitches in Bacillus anthracis

Most riboswitches are composed of a single metabolite-binding aptamer and a single expression platform that function together to regulate genes in response to changing metabolite concentrations. In rare instances, two aptamers or sometimes two complete riboswitches reside adjacent to each other in untranslated regions (UTRs) of mRNAs. We have examined an example of a tandem riboswitch in the Gram-positive bacterium Bacillus anthracis that includes two complete riboswitches for thiamine pyrophosphate (TPP). Unlike other complex riboswitch systems described recently, tandem TPP riboswitches do not exhibit cooperative ligand binding and do not detect two different types of metabolites. In contrast, both riboswitches respond independently to TPP and are predicted to function in concert to mimic the more "digital" gene control outcome observed when two aptamers bind ligands cooperatively. Our findings further demonstrate that simple gene control elements made only of RNA can be assembled in different architectures to yield more complex gene control outcomes.

Aptazyme-based riboswitches as label-free and detector-free sensors for cofactors

We constructed a label-free and detector-free aptazyme-based riboswitch sensor for detecting the cofactor of the aptazyme. This riboswitch, which usually suppresses the gene expression with its anti-RBS sequence bound to the RBS of its own mRNA (OFF), activates the translation only when a cofactor is added to release the anti-RBS sequence from itself as a result of cofactor-induced self-cleavage by the aptazyme (ON). The rationally optimized one with beta-galactosidase as a reporter gene enabled us to detect the cofactor of the aptazyme visibly with high ON/OFF efficiency.

Engineering high-speed allosteric hammerhead ribozymes

Full-length hammerhead ribozymes were subjected to in vitro selection to identify variants that are allosterically regulated by theophylline in the presence of a physiologically relevant concentration of Mg(2+). The population of allosteric ribozymes resulting from 15 rounds of in vitro selection yielded variants with observed rate constants (k (obs)) as high as 8 min(-1) in the presence of theophylline and maximal k (obs) increases of up to 285-fold compared to rate constants measured in the absence of effector. The selected ribozymes have kinetic characteristics that are predicted to be sufficient for cellular gene control applications, but do not exhibit any activity in reporter gene assays. The inability of the engineered RNAs to control gene expression suggests that the in vitro and in vivo folding pathways of the RNAs are different. These results provide several key pieces of information that will aid in future efforts to engineer allosteric ribozymes for gene control applications.

Thiamine pyrophosphate riboswitches are targets for the antimicrobial compound pyrithiamine

Thiamine metabolism genes are regulated in numerous bacteria by a riboswitch class that binds the coenzyme thiamine pyrophosphate (TPP). We demonstrate that the antimicrobial action of the thiamine analog pyrithiamine (PT) is mediated by interaction with TPP riboswitches in bacteria and fungi. For example, pyrithiamine pyrophosphate (PTPP) binds the TPP riboswitch controlling the tenA operon in Bacillus subtilis. Expression of a TPP riboswitch-regulated reporter gene is reduced in transgenic B. subtilis or Escherichia coli when grown in the presence of thiamine or PT, while mutant riboswitches in these organisms are unresponsive to these ligands. Bacteria selected for PT resistance bear specific mutations that disrupt ligand binding to TPP riboswitches and derepress certain TPP metabolic genes. Our findings demonstrate that riboswitches can serve as antimicrobial drug targets and expand our understanding of thiamine metabolism in bacteria.

Regulation of bacterial gene expression by riboswitches

Riboswitches are structured domains that usually reside in the noncoding regions of mRNAs, where they bind metabolites and control gene expression. Like their protein counterparts, these RNA gene control elements form highly specific binding pockets for the target metabolite and undergo allosteric changes in structure. Numerous classes of riboswitches are present in bacteria and they comprise a common and robust metabolite-sensing system.

Natural and engineered nucleic acids as tools to explore biology

RNA and DNA molecules can form complex, three-dimensional folded structures that have surprisingly sophisticated functions, including catalysing chemical reactions and controlling gene expression. Although natural nucleic acids make occasional use of these advanced functions, the true potential for sophisticated function by these biological polymers is far greater. An important challenge for biochemists is to take RNA and DNA beyond their proven use as polymers that form double-helical structures. Molecular engineers are beginning to harness the power of nucleic acids that form more complex three-dimensional structures, and apply them as tools for exploring biological systems and as therapeutics.

A three-fluorophore FRET assay for high-throughput screening of small-molecule inhibitors of ribosome assembly

In one of the first steps of prokaryotic ribosome assembly, the ribosomal protein S15 binds to a three-way junction in the central domain of the 16S rRNA. Binding causes a conformational change that is required for subsequent binding events. Using a novel fluorescence resonance energy transfer assay with three fluorophores, two on the RNA and one on the S15 protein, small-molecule libraries can be screened for potential inhibitors of this initial step in ribosome assembly. The employment of three fluorophores allows both the conformational change of the RNA and the binding of S15 to be monitored in a single assay.

Control of gene expression by a natural metabolite-responsive ribozyme

Most biological catalysts are made of protein; however, eight classes of natural ribozymes have been discovered that catalyse fundamental biochemical reactions. The central functions of ribozymes in modern organisms support the hypothesis that life passed through an 'RNA world' before the emergence of proteins and DNA. We have identified a new class of ribozymes that cleaves the messenger RNA of the glmS gene in Gram-positive bacteria. The ribozyme is activated by glucosamine-6-phosphate (GlcN6P), which is the metabolic product of the GlmS enzyme. Additional data indicate that the ribozyme serves as a metabolite-responsive genetic switch that represses the glmS gene in response to rising GlcN6P concentrations. These findings demonstrate that ribozyme switches may have functioned as metabolite sensors in primitive organisms, and further suggest that modern cells retain some of these ancient genetic control systems.

Monitoring protein modification with allosteric ribozymes

An allosteric ribozyme is an RNA-based enzyme (ribozyme) whose catalytic activity is modulated by molecular recognition of a protein. The direct coupling of a detectable catalytic event to molecular recognition by an allosteric ribozyme enables simple assays for quantitative protein detection. Most significantly, the mode of development and molecular recognition characteristics of allosteric ribozymes are fundamentally different from antibodies, providing them with functional characteristics that complement those of antibodies. Allosteric ribozymes can be developed using native proteins and, therefore, are often sensitive to protein conformation. In contrast, antibodies tend to recognize a series of adjacent amino acids as a consequence of antigen presentation and typically are not sensitive to protein conformation. Unlike antibody development, the development of allosteric ribozymes is a completely in vitro process that allows the specificity of an allosteric ribozyme to be tightly controlled. These significant differences from antibodies allow the pre-programmed development of conformation-state-specific protein detection reagents that can be used to investigate the activation-state of signal transduction components.

Coenzyme B12 riboswitches are widespread genetic control elements in prokaryotes

Recent studies have begun to reveal that numerous fundamental metabolic pathways in bacteria are regulated by riboswitches residing within certain messenger RNAs. These riboswitches selectively bind metabolites and modulate gene expression in response to changing ligand concentrations. Previously, we provided evidence that the btuB mRNAs of Escherichia coli and Salmonella typhimurium each carry a coenzyme B12-dependent riboswitch that causes repressed translation of the encoded cobalamin-transport protein at elevated coenzyme concentrations. Herein, we use a phylogenetic analysis to define a consensus sequence and secondary structure model for the ligand- binding domain of this riboswitch class. RNA structures that conform to this model are widespread in both Gram-positive and Gram-negative organisms. In addition, we find that the 5'-untranslated region (5'-UTR) of the cobalamin biosynthesis (cob) operon of S.typhimurium carries an RNA motif that matches this consensus sequence. Biochemical and genetic characterization of this motif confirms that the RNA directly binds coenzyme B12, and that it likely serves as a genetic control element for regulating expression of the 25-gene operon for cobalamin production in this pathogen.

Adenine riboswitches and gene activation by disruption of a transcription terminator

A class of riboswitches that recognizes guanine and discriminates against other purine analogs was recently identified. RNAs that carry the consensus sequence and structural features of guanine riboswitches are located in the 5' untranslated region (UTR) of numerous prokaryotic genes, where they control the expression of proteins involved in purine salvage and biosynthesis. We report that three representatives of this riboswitch class bind adenine with values for apparent dissociation constant (apparent K(d)) that are several orders of magnitude lower than those for binding guanine. Because preference for adenine is attributable to a single nucleotide substitution, the RNA most likely recognizes its ligand by forming a Watson-Crick base pair. In addition, the adenine riboswitch associated with the ydhL gene of Bacillus subtilis functions as a genetic 'on' switch, wherein adenine binding causes a structural rearrangement that precludes formation of an intrinsic transcription terminator stem.

Engineered catalytic RNA and DNA : new biochemical tools for drug discovery and design

Since the fundamental discovery that RNA catalyzes critical biological reactions, the conceptual and practical utility of nucleic acid catalysts as molecular therapeutic and diagnostic agents continually develops. RNA and DNA catalysts are particularly attractive tools for drug discovery and design due to their relative ease of synthesis and tractable rational design features. Such catalysts can intervene in cellular or viral gene expression by effectively destroying virtually any target RNA, repairing messenger RNAs derived from mutant genes, or directly disrupting target genes. Consequently, catalytic nucleic acids are apt tools for dissecting gene function and for effecting gene pharmacogenomic strategies. It is in this capacity that RNA and DNA catalysts have been most widely utilized to affect gene expression of medically relevant targets associated with various disease states, where a number of such catalysts are presently being evaluated in clinical trials. Additionally, biotechnological prospects for catalytic nucleic acids are seemingly unlimited. Controllable nucleic acid catalysts, termed allosteric ribozymes or deoxyribozymes, form the basis of effector or ligand-dependent molecular switches and sensors. Allosteric nucleic acid catalysts promise to be useful tools for detecting and scrutinizing the function of specified components of the metabolome, proteome, transcriptome, and genome. The remarkable versatility of nucleic acid catalysis is thus the fountainhead for wide-ranging applications of ribozymes and deoxyribozymes in biomedical and biotechnological research.

Primordial genetics: phenotype of the ribocyte

The idea that the ancestors of modern cells were RNA cells (ribocytes) can be investigated by asking whether all essential cellular functions might be performed by RNAs. This requires isolating suitable molecules by selection-amplification when the predicted molecules are presently extinct. In fact, RNAs with many properties required during a period in which RNA was the major macromolecular agent in cells (an RNA world) have been selected in modern experiments. There is, accordingly, reason to inquire how such a ribocyte might appear, based on the properties of the RNAs that composed it. Combining the intrinsic qualities of RNA with the fundamental characteristics of selection from randomized sequence pools, one predicts ribocytes with a cell cycle measured (roughly) in weeks. Such cells likely had a rapidly varying genome, composed of many small genetic and catalytic elements made of tens of ribonucleotides. There are substantial arguments that, at the mid-RNA era, a subset of these nucleotides are reproducibly available and resemble the modern four. Such cells are predicted to evolve rapidly. Instead of modifying preexisting genes, ribocytes frequently draw new functions from an internal pool containing zeptomoles (<1 attomole) of predominantly inactive random sequences.

New highly sensitive and selective catalytic DNA biosensors for metal ions

While remarkable progress has been made in developing sensors for metal ions such as Ca(II) and Zn(II), designing and synthesizing sensitive and selective metal ion sensors remains a significant challenge. Perhaps the biggest challenge is the design and synthesis of a sensor capable of specific and strong metal binding. Since our knowledge about the construction of metal-binding sites in general is limited, searching for sensors in a combinatorial way is of significant value. Therefore, we have been able to use a combinatorial method called in vitro selection to obtain catalytic DNA that can bind a metal ion of choice strongly and specifically. The metal ion selectivity of the catalytic DNA was further improved using a 'negative selection' strategy where catalytic DNA that are selective for competing metal ions are discarded in the in vitro selection processes. By labeling the resulting catalytic DNA with a fluorophore/quencher pair, we have made a new class of metal ion fluorescent sensors that are the first examples of catalytic DNA biosensors for metal ions. The sensors combine the high selectivity of catalytic DNA with the high sensitivity of fluorescent detection, and can be applied to the quantitative detection of metal ions over a wide concentration range and with high selectivity. The use of DNA sensors in detection and quantification of lead ions in environmental samples such as water from Lake Michigan has been demonstrated. DNA is stable, cost-effective, environmentally benign, and easily adaptable to optical fiber and microarray technology for device manufacture. Thus, the DNA sensors explained here hold great promise for on-site and real-time monitoring of metal ions in the fields of environmental monitoring, developmental biology, clinical toxicology, wastewater treatment, and industrial process monitoring.

Ribozymes: recent advances in the development of RNA tools

The discovery 20 years ago that some RNA molecules, called ribozymes, are able to catalyze chemical reactions was a breakthrough in biology. Over the last two decades numerous natural RNA motifs endowed with catalytic activity have been described. They all fit within a few well-defined types that respond to a specific RNA structure. The prototype catalytic domain of each one has been engineered to generate trans-acting ribozymes that catalyze the site-specific cleavage of other RNA molecules. On the 20th anniversary of ribozyme discovery we briefly summarize the main features of the different natural catalytic RNAs. We also describe progress towards developing strategies to ensure an efficient ribozyme-based technology, dedicating special attention to the ones aimed to achieve a new generation of therapeutic agents.

Simultaneous detection of diverse analytes with an aptazyme ligase array

Allosteric ribozymes (aptazymes) can transduce the noncovalent recognition of analytes into the catalytic generation of readily observable signals. Aptazymes are easily engineered, can detect diverse classes of biologically relevant molecules, and have high signal-to-noise ratios. These features make aptazymes useful candidates for incorporation into biosensor arrays. Allosteric ribozyme ligases that can recognize a variety of analytes ranging from small organics to proteins have been generated. Upon incorporation into an array format, multiple different aptazyme ligases were able to simultaneously detect their cognate analytes with high specificity. Analyte concentrations could be accurately measured into the nanomolar range. The fact that analytes induced the formation of new covalent bonds in aptazyme ligases (as opposed to noncovalent bonds in antibodies) potentiated stringent washing of the array, leading to improved signal-to-noise ratios and limits of detection.

An mRNA structure that controls gene expression by binding FMN

The RFN element is a highly conserved domain that is found frequently in the 5'-untranslated regions of prokaryotic mRNAs that encode for flavin mononucleotide (FMN) biosynthesis and transport proteins. We report that this domain serves as the receptor for a metabolite-dependent riboswitch that directly binds FMN in the absence of proteins. Our results also indicate that in Bacillus subtilis, the riboswitch most likely controls gene expression by causing premature transcription termination of the ribDEAHT operon and precluding access to the ribosome-binding site of ypaA mRNA. Sequence and structural analyses indicate that the RFN element is a natural FMN-binding aptamer, the allosteric character of which is harnessed to control gene expression.

Thiamine derivatives bind messenger RNAs directly to regulate bacterial gene expression

Although proteins fulfil most of the requirements that biology has for structural and functional components such as enzymes and receptors, RNA can also serve in these capacities. For example, RNA has sufficient structural plasticity to form ribozyme and receptor elements that exhibit considerable enzymatic power and binding specificity. Moreover, these activities can be combined to create allosteric ribozymes that are modulated by effector molecules. It has also been proposed that certain messenger RNAs might use allosteric mechanisms to mediate regulatory responses depending on specific metabolites. We report here that mRNAs encoding enzymes involved in thiamine (vitamin B(1)) biosynthesis in Escherichia coli can bind thiamine or its pyrophosphate derivative without the need for protein cofactors. The mRNA-effector complex adopts a distinct structure that sequesters the ribosome-binding site and leads to a reduction in gene expression. This metabolite-sensing regulatory system provides an example of a 'riboswitch' whose evolutionary origin might pre-date the emergence of proteins.

A biosensor for theophylline based on fluorescence detection of ligand-induced hammerhead ribozyme cleavage

Recently, Breaker and coworkers engineered hammerhead ribozymes that rearrange from a catalytically inactive to an active conformation upon allosteric binding of a specific ligand. To monitor cleavage activity in real time, we have coupled a donor-acceptor fluorophore pair to the termini of the substrate RNA of such a hammerhead ribozyme, modified to cleave in trans in the presence of the bronchodilator theophylline. In the intact substrate, the fluorophores interact by fluorescence resonance energy transfer (FRET). The specific FRET signal breaks down as the effector ligand binds, the substrate is cleaved, and the products dissociate, with a rate constant dependent on the concentration of the ligand. Our biosensor cleaves substrate at 0.46 min(-1) in 1 mM theophylline and 0.04 min(-1) without effector, and discriminates against caffeine, a structural relative of theophylline. We have measured the theophylline-dependence profile of this biosensor, showing that concentrations as low as 1 microM can be distinguished from background. To probe the mechanism of allosteric regulation, a single nucleotide in the communication domain between the catalytic and ligand-binding domains was mutated to destabilize the inactive conformation of the ribozyme. As predicted, this mutant shows the same activity (0.3 min(-1)) in the presence and absence of theophylline. Additionally, time-resolved FRET measurements on the biosensor ribozyme in complex with a noncleavable substrate analog reveal no significant changes in fluorophore distance distribution upon binding of effector.