Kinetic determinations and some kinetic aspects of analytical chemistry

Carbocyanine-Based Fluorescent and Colorimetric Sensor Array for the Discrimination of Medicinal Compounds

Array-based optical sensing is an efficient technique for the determination and discrimination of small organic molecules. This study is aimed at the development of a simple and rapid strategy for obtaining an optical response from a wide range of low-molecular-weight organic compounds. We have suggested a colorimetric and fluorimetric sensing platform based on the combination of two response mechanisms using carbocyanine dyes: aggregation and oxidation. In the first one, the analyte forms ternary aggregates with an oppositely charged surfactant wherein the dye is solubilized in the hydrophobic domains of the surfactant accompanied with fluorescent enhancement. The second mechanism is based on the effect of the analyte on the catalytic reaction rate of dye oxidation with H2O2 in the presence of a metal ion (Cu2+, Pd2+), which entails fluorescence waning and color change. The reaction mixture in a 96-well plate is photographed in visible light (colorimetry) and the near-IR region under red light excitation (fluorimetry). In this proof-of-concept study, we demonstrated the feasibility of discrimination of nine medicinal compounds using principal component analysis: four cephalosporins (ceftriaxone, cefazolin, ceftazidime, cefotaxime), three phenothiazines (promethazine, promazine, chlorpromazine), and two penicillins (benzylpenicillin, ampicillin) in an aqueous solution and in the presence of turkey meat extract. The suggested platform allows simple and rapid recognition of analytes of various nature without using spectral equipment, except for a photo camera.

Analytical Applications of Permanganate as an Oxidant in the Determination of Pharmaceuticals Using Chemiluminescence and Spectrophotometry: A Review

Background:

Potassium permanganate is a green and versatile industrial oxidizing agent. Due to its high oxidizing ability, it has received considerable attention and has been extensively used for many years for the synthesis, identification, and determination of inorganic and organic compounds.

Objective:

Potassium permanganate is one of the most applicable oxidants, which has been applied in a number of processes in several industries. Furthermore, it has been widely used in analytical pharmacy to develop analytical methods for pharmaceutically active compounds using chemiluminescence and spectrophotometric techniques.

Results:

This review covers the importance of potassium permanganate over other common oxidants used in pharmaceuticals and reported its extensive use and analytical applications using direct, indirect and kinetic spectrophotometric methods in different pharmaceutical formulations and biological samples. Chemiluminescent applications of potassium permanganate in the analyses of pharmaceuticals using flow and sequential injection techniques are also discussed.

Conclusion:

This review summarizes the extensive use of potassium permanganate as a chromogenic and chemiluminescent reagent in the analyses of pharmaceutically active compounds to develop spectrophotometric and chemiluminescence methods since 2000.

New Derivatization Methodology of 4-aminobenzoic Acid from its Dietary Supplements: Kinetic Spectrophotometric Methods for Determination

Background:

A new approach describing the validation and development of an easy, new spectrophotometric and kinetic method for identification of para-aminobenzoic acid in dietary supplement has been performed. In this study, para-aminobenzoic acid was derived in a pH-controlled environment, as a new organic compound 4(4-Benzophenylazo)pyrogallol, by incorporating diazotized para-aminobenzoic acid with pyrogallol.

Objective:

The determination of para-aminobenzoic acid was conducted by the fixed time and initial rate techniques. These approaches were based on the reaction of the compound containing paraaminobenzoic acid, 4(4-Benzophenylazo)pyrogallol, with Ag(I) to form colored product with a maximum absorbance at 468nm. Both of these techniques were adopted for constructing the calibration curves and examined for their suitability for the quantitation of para-aminobenzoic acid in dietary supplement.

Methods:

The determination process was established, using initial rate and fixed time kinetic spectrophotometric methods.

Results:

4(4-Benzophenylazo)pyrogallol was characterized using proton-nuclear magnetic resonance, Fourier-transform infrared, differential scanning calorimetry and thermogravimetric thermal methods, gas chromatography–mass techniques, and solvatochromic behavior in solvents with different polarities was also examined.

Conclusion:

For the first time, para-aminobenzoic acid was well determined by incorporating it as an organic solid compound, 4(4-Benzophenylazo)pyrogallol, through coupling pyrogallol with diazotized para-aminobenzoic acid in regulated pH medium, ranging between 5.0 to 6.0. The existence of common excipients in the dietary supplement did not produce any significant interference. F- and ttest data analysis were used for statistical comparison of the suggested techniques with that of reference method, demonstrating excellent agreement with no significant difference in the associated precision and accuracy.

Mechanism and Phenomenology of an Oscillating Chemical Reaction

Chemical reactions, which are far from equilibrium, are capable of displaying oscillations in species concentrations and hence in colour, electrode potential, pH and/or temperature. The oscillations arise from the interplay between positive and negative kinetic feedback. Mechanisms for such reactions are presented, along with the rich phenomenology that these systems exhibit, from complex oscillations and chemical waves, to stationary concentration patterns. This review will focus on the Belousov-Zhabotinksy reaction but reference to other reactions will be made where appropriate.

Kinetic spectrophotometric method for trace determination of thiocyanate based on its inhibitory effect

A kinetic spectrophotometric method for the determination of thiocyanate, based on its inhibitory effect on silver(I) catalyzed substitution of cyanide ion, by phenylhydrazine in hexacyanoferrate(II) is described. Thiocyanate ions form strong complexes with silver(I) catalyst which is used as the basis for its determination at trace level. The progress of reaction was monitored, spectrophotometrically, at 488 nm (lambda(max) of [Fe(CN)(5)PhNHNH(2)](3-), complex) under the optimum reaction conditions at: 2.5x10(-3)M [Fe(CN)(6)](4-), 1.0x10(-3)M [PhNHNH(2)], 8.0x10(-7)M [Ag(+)], pH 2.8+/-0.02, ionic strength (mu) 0.02 M (KNO(3)) and temperature 30+/-0.1 degrees C. A linear relationship obtained between absorbance (measured at 488 nm at different times) and inhibitor concentration, under specified conditions, has been used for the determination of [thiocyanate] in the range of 0.8-8.0x10(-8)M with a detection limit of 2x10(-9)M. The standard deviation and percentage error have been calculated and reported with each datum. A most plausible mechanistic scheme has been proposed for the reaction. The values of equilibrium constants for complex formation between catalyst-inhibitor (K(CI)), catalyst-substrate (K(s)) and Michaelis-Menten constant (K(m)) have been computed from the kinetic data. The influence of possible interference by major cations and anions on the determination of thiocyanate and their limits has been investigated.

New sensitive kinetic spectrophotometric methods for determination of omeprazole in dosage forms

New rapid, sensitive, and accurate kinetic spectrophotometric methods were developed, for the first time, to determine omeprazole (OMZ) in its dosage forms. The methods were based on the formation of charge-transfer complexes with both iodine and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). The variables that affected the reactions were carefully studied and optimized. The formed complexes and the site of interaction were examined by UV/VIS, IR, and ¹H-NMR techniques, and computational molecular modeling. Under optimum conditions, the stoichiometry of the reactions between OMZ and the acceptors was found to be 1 : 1. The order of the reactions and the specific rate constants were determined. The thermodynamics of the complexes were computed and the mechanism of the reactions was postulated. The initial rate and fixed time methods were utilized for the determination of OMZ concentrations. The linear ranges for the proposed methods were 0.10–3.00 and 0.50–25.00 μg mL⁻¹ with the lowest LOD of 0.03 and 0.14 μg mL⁻¹ for iodine and DDQ, respectively. Analytical performance of the methods was statistically validated; RSD was <1.25% for the precision and <1.95% for the accuracy. The proposed methods were successfully applied to the analysis of OMZ in its dosage forms; the recovery was 98.91–100.32% ± 0.94–1.84, and was found to be comparable with that of reference method.

Application of ruthenium catalyzed oxidation of [tris(2-aminoethyl)amine] in trace determination of ruthenium in environmental water samples

The ruthenium catalyzed oxidation of tris(2-aminoethyl)amine (TREN) by hexacyanoferrate(III) has been utilized for the development of a new and sensitive catalytic kinetic method (CKM) for the determination of ruthenium(III). The reaction was followed spectrophotometrically by the decrease in absorbance at 420 nm (lambda(max) of [Fe(CN)6]3-). The CKM developed utilizes fixed time procedure under optimum reaction conditions where the change in absorbance (DeltaAt) versus ruthenium(III) concentrations is plotted. The calibration curve recommended for the method is linear in the concentration range 10.11-252.67 ng ml(-1) with very good accuracy and reproducibility and a maximum error 2.20%. The detection limits of the method for ruthenium(III) corresponding to 10, 15 and 20 min are 8.02, 5.03 and 3.15 ng ml(-1), respectively. The ruthenium(III) has also been determined in the presence of several other interfering and non-interfering cations and anions and no foreign ions interfered in the determination of ruthenium(III) up to five-fold higher concentration of the foreign ions tested. The method is highly sensitive, selective and stable. It has successfully been applied for the determination of trace ruthenium(III) in some synthetic and environmental water samples. A review of most of the published catalytic kinetic and some other important methods for the determination of ruthenium has also been presented.

Multivariate curve resolution-alternating least squares (MCR-ALS) applied to spectroscopic data from monitoring chemical reactions processes

This paper overviews the application of multivariate curve resolution (optimized by alternating least squares) to spectroscopic data acquired by monitoring chemical reactions and other processes. The goals of the resolution methods and the principles for understanding their applications are described. Some of the problems arising from these evolving systems and the limitations of the multivariate curve resolution methods are also discussed. This article reviews most of the applications of multivariate curve resolution applied to reacting systems published between January 2000 and June 2007. Some basic papers dated before 2000 have also been included.

Individual and simultaneous determinations of phenothiazine drugs using PCR, PLS and (OSC)-PLS multivariate calibration methods

Individual and simultaneous determinations of some phenothiazine drugs are described. The individual determination method is based on the reaction of chlorpromazine hydrochloride (CPH), promethazine hydrochloride (PH), trifluoperazine hydrochloride (TFPH), trimipramine maleate (TPM) and thioridazine hydrochloride (TRDH) with complex of [Fe(Bpy)3]3+. In the presence of phenothiazine derivatives, [Fe(Bpy)3]3+ is reduced easily to the colored complex [Fe(Bpy)3]2+, which shows an absorption maximum at 525 nm. The individual method is highly sensitive and suitable for 0.3-190 ?g ml-1 concentrations, with detection limits in the range 0.18-2.46 ?g ml-1. Simultaneous kinetic-spectrophotometric determination of ternary mixture of CPH, PH and TPM using principal component regression (PCR), partial least squares (PLS) and orthogonal signal correction (OSC)-PLS multivariate calibration methods is also described. The simultaneous methods are based on the difference observed in the reduction rate of the [Fe(Bpy)3]3+ complex with CPH, PH and TPM in acidic media. The results showed that the simultaneous determination of CPH, PH and TPM can be performed in the concentration ranges of 0.5-120.0, 0.3-80.0 and 5.0-100.0 ?g ml-1, respectively, for three methods (PCR, PLS and OSC-PLS). The root mean square errors of prediction (RMSEP) of CPH, PH and TPM were 0.346, 0.663 and 0.820 (for PCR) 0.317, 0.659 and 0.830 (for PLS) and 0.087, 0.124 and 0.085 (for OSC-PLS), respectively. The proposed methods were successfully applied to the individual and simultaneous determination of phenothiazine derivatives in pharmaceutical preparations, the results of which compared well with those obtained by the official method, and several synthetic (spiked) samples, whereby satisfactory results were obtained.

Highly sensitive catalytic spectrophotometric determination of ruthenium

A new and highly sensitive catalytic kinetic method (CKM) for the determination of ruthenium(III) has been established based on its catalytic effect on the oxidation of l-phenylalanine (l-Pheala) by KMnO(4) in highly alkaline medium. The reaction has been followed spectrophotometrically by measuring the decrease in the absorbance at 526nm. The proposed CKM is based on the fixed time procedure under optimum reaction conditions. It relies on the linear relationship where the change in the absorbance (DeltaA(t)) versus added Ru(III) amounts in the range of 0.101-2.526ngml(-1) is plotted. Under the optimum conditions, the sensitivity of the proposed method, i.e. the limit of detection corresponding to 5min is 0.08ngml(-1), and decreases with increased time of analysis. The method is featured with good accuracy and reproducibility for ruthenium(III) determination. The ruthenium(III) has also been determined in presence of several interfering and non-interfering cations, anions and polyaminocarboxylates. No foreign ions interfered in the determination ruthenium(III) up to 20-fold higher concentration of foreign ions. In addition to standard solutions analysis, this method was successfully applied for the quantitative determination of ruthenium(III) in drinking water samples. The method is highly sensitive, selective and very stable. A review of recently published catalytic spectrophotometric methods for the determination of ruthenium(III) has also been presented for comparison.

Kinetic method for determination of ascorbic acid on flow injection system by using its catalytic effect on the complexation reaction of an ultra sensitive colorimetric reagent of porphyrin with Cu(II)

A kinetic method performed on a flow injection system is described for the determination of ascorbic acid by using its catalytic effect on the complexation reaction of Cu(II) with 5,10,15,20-tetrakis(4-N-trimethyl-aminophenyl)porphyrin. The characteristic spectrum of porphyrin (Soret band), which shows intense absorption around 400 nm (epsilon>2.0 x 10(5) cm(-1)M(-1)), was used first time for determining ascorbic acid. By incorporating the complexation reaction into a flow injection system, ascorbic acid could be determined either over a broad dynamic range of 0.1-1000 microg/ml or at a trace level below 5 ng/ml. Good repeatability was also achieved by testing a working standard of 0.1 microg/ml with 10 injections at a throughput of 35 h(-1), obtaining a relative standard deviation of 0.11%. Substances like amino acids, vitamins, sugars, organic acids and metal ions, showed no or little interference even present at high concentrations. The method was validated in the determination of ascorbic acid contents of some commercially available soft drinks by comparison with the official 2,6-dichloroindophenol method with reasonable agreement.

Copper in the silk formation process ofBombyx morisilkworm

Evidence is presented here that cupric ions play a part in the natural spinning of Bombyx mori silk. Proton induced X-ray emission studies revealed that the copper content increased from the posterior part to the anterior part of silk gland, and then further increased in the silk fiber. Spectrophotometric analysis demonstrated that cupric ions formed coordination complexes with silk fibroin chains while Raman spectroscopy indicated that they induced a conformation transition from random coil/helix to beta-sheet. Taken together these findings indicate that copper could play a role in the natural spinning process in silkworms.

Kinetic determination of ultramicro amounts of Cu(II) ion in solution

A new kinetic method is described for the determination of ultramicro amounts of Cu(II) based on its catalytic effect on the oxidation of trisodium-2-hydroxy 1-(4-sulphonato-1-naphthylazo)naphthalene-6,8-disulphonato (red artificial color PONCEAU 4R) by hydrogen peroxide in borate buffer (B.B). The detection limit given by Perez-Bendito is 0.8 ng/cm3, but the detection limit that we experimentaly determined is 3.8 ng/cm3. The relative error ranges between 7.77 and 2.09%for the concentration interval 3.8 to 50.1 ng/cm3. Kinetic equations are proposed for the investigated process. The effects of certain foreign ions upon the reaction rate were determined for an assessment of the selectivity of the method. The method was applied for the determination of Cu(II) ions in samples of alloy.

Matrix-assisted laser desorption/ionization mass spectrometry for locating abasic sites and determining the rates of enzymatic hydrolysis of model oligodeoxynucleotides

A method using a combination of exonuclease enzymatic digestion and matrix-assisted laser desorption/ionization (MALDI) mass spectrometry was developed to locate model abasic sites in a series of model 21-base oligodeoxynucleotides in which a nucleobase was replaced by a hydrogen atom. The exonuclease digestion rate, with either snake venom phosphodiesterase (SVP) or bovine spleen phosphodiesterase (BSP), clearly slows as the digestion approaches the abasic sites and stops as it reaches it. An oligodeoxynucleotide containing an abasic site in which OH replaces the nucleobase shows similar results. MALDI mass spectra taken at appropriate times during the course of hydrolysis are the basis for rate measurements, and the kinetics also reveal the location of the abasic site. A mathematical treatment of the time-dependent MALDI data was implemented to obtain rate curves and rate constants for the enzymatic digestion of both modified and unmodified oligodeoxynucleotides.