Electrochemical Biosensing Platform Using Hydrogel Prepared from Ferrocene Modified Amino Acid as Highly Efficient Immobilization Matrix

Emerging innovations in portable chemical sensing devices: Advancements from microneedles to hydrogel, microfluidic, and paper-based platforms

With the public heightened emphasis on mitigating the occurrence risks of health-related ailment and optimizing personal physical performance, portable chemical sensing devices emerged as an indispensable component of pervasive health monitoring. Chemical sensing enabled the immediate and on-site identification of biomarkers in biological fluids by integrating colorimetry, fluorescence, electrochemical, and other methods into portable sensor devices. These sensor devices incorporated microneedles, hydrogels, microfluidic modules, and papers, facilitating conformal human-device contact and providing several visual sensing options for disease prevention and healthcare management. This review systematically overviewed recent advancements in chemical sensors for marker detection, categorizing them based on monitoring device types. Furthermore, we also offered recommendations and opportunities for developing portable chemical sensing devices by summarizing sensor integration methods and tracking sites on the human body.

Ring-opening polymerization of lactide catalyzed using metal-coordinated enzyme-like amino acid assemblies

Polylactide (PLA), a biocompatible and biodegradable polymer, is widely used in diverse biomedical applications. However, the industry standard for converting lactide into PLA involves toxic tin (Sn)-based catalysts. To mitigate the use of these harmful catalysts, other environmentally benign metal-containing agents for efficient lactide polymerization have been studied, but these alternatives are hindered by complex synthesis processes, reactivity issues, and selectivity limitations. To overcome these shortcomings, we explored the catalytic activity of Cu-(Phe)2 and Zn-(Phe)2 metal-amino acid co-assemblies as potential catalysts of the ring-opening polymerization (ROP) of lactide into PLA. Catalytic activity of the assemblies was monitored at different temperatures and solvents using 1H-NMR spectroscopy to determine the catalytic parameters. Notably, Zn-(Phe)2 achieved >99% conversion of lactide to PLA within 12 h in toluene under reflux conditions and was found to have first-order kinetics, whereas Cu-(Phe)2 exhibited significantly lower catalytic activity. Following Zn-(Phe)2-mediated catalysis, the resulting PLA had an average molecular weight of 128 kDa and a dispersity index of 1.25 as determined by gel permeation chromatography. Taken together, our minimalistic approach expands the realm of metal-amino acid-based supramolecular catalytic nanomaterials useful in the ROP of lactide. This advancement shows promise for the future design of simplified biocatalysts in both industrial and biomedical applications.

Advancements in Biosensors Based on the Assembles of Small Organic Molecules and Peptides

Over the past few decades, molecular self-assembly has witnessed tremendous progress in a variety of biosensing and biomedical applications. In particular, self-assembled nanostructures of small organic molecules and peptides with intriguing characteristics (e.g., structure tailoring, facile processability, and excellent biocompatibility) have shown outstanding potential in the development of various biosensors. In this review, we introduced the unique properties of self-assembled nanostructures with small organic molecules and peptides for biosensing applications. We first discussed the applications of such nanostructures in electrochemical biosensors as electrode supports for enzymes and cells and as signal labels with a large number of electroactive units for signal amplification. Secondly, the utilization of fluorescent nanomaterials by self-assembled dyes or peptides was introduced. Thereinto, typical examples based on target-responsive aggregation-induced emission and decomposition-induced fluorescent enhancement were discussed. Finally, the applications of self-assembled nanomaterials in the colorimetric assays were summarized. We also briefly addressed the challenges and future prospects of biosensors based on self-assembled nanostructures.

Advances in Nanomaterial-Based Biosensors for Determination of Glycated Hemoglobin

Diabetes is a major public health burden whose prevalence has been steadily increasing over the past decades. Glycated hemoglobin (HbA1c) is currently the gold standard for diagnostics and monitoring glycemic control in diabetes patients. HbA1c biosensors are often considered to be cost-effective alternatives for smaller testing laboratories or clinics unable to access other reference methods. Many of these sensors deploy nanomaterials as recognition elements, detection labels, and/or transducers for achieving sensitive and selective detection of HbA1c. Nanomaterials have emerged as important sensor components due to their excellent optical and electrical properties, tunable morphologies, and easy integration into multiple sensing platforms. In this review, we discuss the advantages of using nanomaterials to construct HbA1c sensors and various sensing strategies for HbA1c measurements. Key gaps between the current technologies with what is needed moving forward are also summarized.

GNP-CeO2- polyaniline hybrid hydrogel for electrochemical detection of peroxynitrite anion and its integration in a microfluidic platform

Peroxynitrite anion (ONOO^-) is an important in vivo oxidative stress biomarker whose aberrant levels have pathophysiological implications. In this study, an electrochemical sensor for ONOO^- detection was developed based on graphene nanoplatelets-cerium oxide nanocomposite (GNP-CeO₂) incorporated polyaniline (PANI) conducting hydrogels. The nanocomposite-hydrogel platform exhibited distinct synergistic advantages in terms of large electroactive surface coverage and providing a conductive pathway for electron transfer. Besides, the 3D porous structure of hydrogel integrated the GNP-CeO₂ nanocomposite to provide hybrid materials for the evolution of catalytic activity towards electrochemical oxidation of ONOO^-. Various microscopic and spectroscopic characterization techniques endorsed the successful formation of GNP-CeO₂-PANI hydrogel. Cyclic voltammetry (CV) measurements of GNP-CeO₂-PANI hydrogel modified screen-printed electrodes (SPE) were carried out to record the current changes influenced by ONOO^-. The prepared sensor demonstrated a significant dose-dependent increase in CV peak current within a linear range of 5-100 µM (at a potential of 1.12 V), and a detection limit of 0.14 with a sensitivity of 29.35 ± 1.4 μA μM^-1. Further, a customized microfluidic flow system was integrated with the GNP-CeO₂-PANI hydrogel modified SPE to enable continuous electrochemical detection of ONOO^- at low sample volumes. The developed microfluidic electrochemical device demonstrated an excellent sensitivity towards ONOO^- under optimal experimental conditions. Overall, the fabricated microfluidic device with hybrid hydrogels as electrochemical interfaces provides a reliable assessment of ONOO^- levels. This work offers considerable potential for understanding the oxidative stress-related disease mechanisms through determination of ONOO^- in biological samples.

Conductive Hydrogel-Based Electrochemical Sensor: A Soft Platform for Capturing Analyte

Electrode modifications for electrochemical sensors attract a lot of attention every year. Among them, hydrogels are a relatively special class of electrode modifier. Since hydrogels often contain polymers, even though they are conductive polymers, they are not ideal electrode modifiers because of their poor conductivity. However, the micro-aqueous environment and the three-dimensional structure of hydrogels are an excellent platform for immobilizing bioactive molecules and maintaining their activity. This gives the hydrogel-modified electrochemical sensor the potential to perform specific recognition. At the same time, the rapid development of nanomaterials also makes the composite hydrogel have good electrical conductivity. This has led many scientists to become interested in hydrogel-based electrochemical sensors. In this review, we summarize the development process of hydrogel-based electrochemical sensors, starting from 2000. Hydrogel-based electrochemical sensors were initially used only as a carrier for biomolecules, mostly for loading enzymes and for specific recognition. With the widespread use of noble metal nanoparticles and carbon materials, hydrogels can now be used to prepare enzyme-free sensors. Although there are some sporadic studies on the use of hydrogels for practical applications, the vast majority of reports are still limited to the detection of common model molecules, such as glucose and H2O2. In the review, we classify hydrogels according to their different conducting strategies, and present the current status of the application of different hydrogels in electrochemical sensors. We also summarize the advantages and shortcomings of hydrogel-based electrochemical sensors. In addition, future prospects regarding hydrogel for electrochemical sensor use have been provided at the end.

Electroactive Nanogel Formation by Reactive Layer-by-Layer Assembly of Polyester and Branched Polyethylenimine via Aza-Michael Addition

We here demonstrate the utilization of reactive layer-by-layer (rLBL) assembly to form a nanogel coating made of branched polyethylenimine (BPEI) and alkyne containing polyester (PE) on a gold surface. The rLBL is generated by the rapid aza-Michael addition reaction of the alkyne group of PE and the -NH₂ groups of BPEI by yielding a homogeneous gel coating on the gold substrate. The thickness profile of the nanogel revealed that a 400 nm thick coating is formed by six multilayers of rLBL, and it exhibits 50 nm roughness over 8 μm distance. The LBL characteristics were determined via depth profiling analysis by X-ray photoelectron spectroscopy, and it has been shown that a 70-100 nm periodic increase in gel thickness is a consequence of consecutive cycles of rLBL. A detailed XPS analysis was performed to determine the yield of the rLBL reaction: the average yield was deduced as 86.4% by the ratio of the binding energies at 286.26 eV, (C═CN-C bond) and 283.33 eV, (C≡C triple bond). The electrochemical characterization of the nanogels ascertains that up to the six-multilayered rLBL of BPEI-PE is electroactive, and the nanogel permeability had led to drive mass and charge transfer effectively. These results promise that nanogel formation by rLBL films may be a straightforward modification of electrodes approach, and it exhibits potential for the application of soft biointerfaces.

Self-healing mechanism and bioelectrochemical interface properties of core-shell guanosine-borate hydrogels

The self-healing mechanism and bioelectrochemical interface properties of supramolecular gels have been rarely explored. In this context, we propose a constitutive "fibril-reorganization" model to reveal the self-healing mechanism of a series of core-shell structured guanosine-borate (GB) hydrogels and emphasize that interfibrillar interactions at the supramolecular polymer scale (G-quadruplex nanowires) drive the self-healing process of GB hydrogels. Structure-electrochemical sensing performance studies reveal that GB hydrogel nanofibers with relatively strong biomolecular affinity such as -SH modified GB hydrogel (GB-SH) show a high sensitivity of response and low limit of detection for tumour marker alpha-fetoprotein sensing (AFP; 0.076 pg mL^-1). Guanosine/ferroceneboronic acid (GB-Fc) hydrogel nanofibers with superior conductivity and redox activity display the widest linear detection range for AFP (0.0005-100 ng mL^-1). Structure-property correlations of GB hydrogels provide useful insight for the future design of advanced self-healing materials and electrochemical biosensors.

Supramolecular gel formation regulated by water content in organic solvents: self-assembly mechanism and biomedical applications

As one of the most important and fruitful methods, supramolecular self-assembly has a significant advantage in designing and fabricating functional soft materials with various nanostructures. In this research, a low-molecular-weight gelator, N,N'-di(pyridin-4-yl)-pyridine-3,5-dicarboxamide (PDA-N4), was synthesized and used to construct self-assembled gels via a solvent-mediated strategy. It was found that PDA-N4 could form supramolecular gels in mixed solvents of water and DMSO (or DMF) at high water fraction (greater than or equal to 50%). By decreasing the water fraction from 50% to 30%, the gel, suspension and solution phases appeared successively, indicating that self-assembled aggregates could be efficiently modulated via water content in organic solvents. Moreover, the as-prepared PDA-N4 supramolecular gels not only displayed solid-like behavior, and pH- and thermo-reversible characteristics, but also showed a solution-gel-crystal transition with the extension of aging time. Further analyses suggested that both the crystal and gel had similar assembled structures. The intermolecular hydrogen bonding between amide groups and the π-π stacking interactions between pyridine groups played key roles in gel formation. Additionally, the release behavior of vitamin B12 (VB12) from PDA-N4 gel (H2O/DMSO, v/v = 90/10) was evaluated, and the drug controlled release process was consistent with a first-order release mechanism. The human umbilical venous endothelial cell culture results showed that the PDA-N4 xerogel has good cytocompatibility, which implied that the gels have potential biological application in tissue engineering and controlled drug release.

Development of a novel label-free impedimetric electrochemical sensor based on hydrogel/chitosan for the detection of ochratoxin A

Ochratoxin A (OTA) is one of the most abundant mycotoxins that contaminate various food products. Herein, we propose a novel label-free impedimetric electrochemical sensor consisting of chitosan/dipeptide nanofibrous hydrogel and immobilized DNA probes with OTA aptamer for the detection of OTA. The thin film of chitosan/dipeptide nanofibrous hydrogel was used as sensing interface and carrier for hybridization chain reaction (HCR) of OTA aptamer and DNA2 strand to form DNA concatemer. The concatemer was dissociated to single-stranded DNA (ssDNA) in the presence of target OTA, and the signal amplification was further implemented by introducing RecJ_f exonuclease, which could digest the single-stranded DNA resulting in OTA recycle. Electrochemical impedance spectroscopy (EIS) has been employed to characterize the properties of the fabricated sensor. A linear detection range of 0.1-100 ng mL^-1 was obtained for OTA with a low detection limit of 0.03 ng mL^-1. Furthermore, the developed sensor was demonstrated in white wine to detect OTA, indicating that the proposed impedimetric sensor has a promising potential application in the food industry.

Electrochemical glucose sensors in diabetes management: an updated review (2010-2020)

While over half a century has passed since the introduction of enzyme glucose biosensors by Clark and Lyons, this important field has continued to be the focus of immense research activity. Extensive efforts during the past decade have led to major scientific and technological innovations towards tight monitoring of diabetes. Such continued progress toward advanced continuous glucose monitoring platforms, either minimal- or non-invasive, holds considerable promise for addressing the limitations of finger-prick blood testing toward tracking glucose trends over time, optimal therapeutic interventions, and improving the life of diabetes patients. However, despite these major developments, the field of glucose biosensors is still facing major challenges. The scope of this review is to present the key scientific and technological advances in electrochemical glucose biosensing over the past decade (2010-present), along with current obstacles and prospects towards the ultimate goal of highly stable and reliable real-time minimally-invasive or non-invasive glucose monitoring. After an introduction to electrochemical glucose biosensors, we highlight recent progress based on using advanced nanomaterials at the electrode-enzyme interface of three generations of glucose sensors. Subsequently, we cover recent activity and challenges towards next-generation wearable non-invasive glucose monitoring devices based on innovative sensing principles, alternative body fluids, advanced flexible materials, and novel platforms. This is followed by highlighting the latest progress in the field of minimally-invasive continuous glucose monitoring (CGM) which offers real-time information about interstitial glucose levels, by focusing on the challenges toward developing biocompatible membrane coatings to protect electrochemical glucose sensors against surface biofouling. Subsequent sections cover new analytical concepts of self-powered glucose sensors, paper-based glucose sensing and multiplexed detection of diabetes-related biomarkers. Finally, we will cover the latest advances in commercially available devices along with the upcoming future technologies.

Nanomaterials for Healthcare Biosensing Applications

In recent years, an increasing number of nanomaterials have been explored for their applications in biomedical diagnostics, making their applications in healthcare biosensing a rapidly evolving field. Nanomaterials introduce versatility to the sensing platforms and may even allow mobility between different detection mechanisms. The prospect of a combination of different nanomaterials allows an exploitation of their synergistic additive and novel properties for sensor development. This paper covers more than 290 research works since 2015, elaborating the diverse roles played by various nanomaterials in the biosensing field. Hence, we provide a comprehensive review of the healthcare sensing applications of nanomaterials, covering carbon allotrope-based, inorganic, and organic nanomaterials. These sensing systems are able to detect a wide variety of clinically relevant molecules, like nucleic acids, viruses, bacteria, cancer antigens, pharmaceuticals and narcotic drugs, toxins, contaminants, as well as entire cells in various sensing media, ranging from buffers to more complex environments such as urine, blood or sputum. Thus, the latest advancements reviewed in this paper hold tremendous potential for the application of nanomaterials in the early screening of diseases and point-of-care testing.

Biological Influence of Nonswelling Microgels on Cartilage Induction of Mouse Adipose-Derived Stem Cells

In cartilage tissue engineering, the target cells' functional performance depends on the biomaterials. However, it is difficult to develop an appropriate scaffold to differentiate mouse adipose-derived stem cells (mADSCs) into chondrocyte despite an increasing number of studies on biological scaffold materials. The purpose of this study was to create a novel scaffold for mADSC culture and chondrogenic differentiation with a new series of microgels based on polyethyleneimine (PEI), polyethylene glycol (PEG), and poly (L-lactic acid) (PLLA) and able to resist swelling with changes in temperature, pH, and polymer concentration. The biocompatibility and ability of the nonswelling microgels were then examined and served as scaffolds for cell culture and for cartilage differentiation. The results show that the new microgels are a novel biomaterial that both retains its nonswelling properties under various conditions and facilitates important scaffold functions such as cell adhesion, proliferation, and cartilage induction.

Ferrocene-Modified Polyelectrolyte Film-Coated Electrode and Its Application in Glucose Detection

A polyelectrolyte film-coated electrode for the quantitative detection of glucose was reported. Carbon nanotubes, graphene oxide and polyelectrolyte with a ferrocenyl group were used to modify an enzyme electrode to facilitate the electron transfer between glucose oxidase and the electrode. Cyclic voltammetry and amperometric methods were adopted to investigate the effects of different polyelectrolytes and carbon nanomaterials on the electrochemical properties of enzyme electrodes. The results indicate that the ferrocenyl groups on a polyelectrolyte skeleton act as a mediator between the redox center of glucose oxidase and the electrode, which efficiently enhances the electron transfer between a glassy carbon electrode and glucose oxidase. The calibration curve of the sensor shows a linear range from 0.2 to 5 mM for glucose response. The sensor can achieve 95% of the steady-state current within 10 s. The electrodes also present high operational stability and long-term storage stability.

5-(1H-1,2,3-Triazol-5-yl)isophthalic Acid: A Versatile Ligand for the Synthesis of New Supramolecular Metallogels

The gelation ability of 5-(1H-1,2,3-triazol-5-yl)isophthalic acid (click-TIA) in the presence of different metal acetates has been studied in different solvents and ligand/metal ratios. This manuscript is focused on the metallogel obtained from the combination of click-TIA and copper(II) acetate, which has been used as a model system in terms of characterization and gelation studies. Sonication treatment of the initial mixture of compounds and the nature of the counter anion were found to be critical factors for the supramolecular assembly of the metal/click-TIA complexes and, hence, for the formation of stable and homogeneous metallogels. The gel materials have been characterized with a variety of techniques including infrared, rheology, UV-vis spectroscopy, powder X-ray diffraction, and scanning electron microscopy.

3D biosensors in advanced medical diagnostics of high mortality diseases

Cardiovascular diseases, cancer, and diabetes are high mortality diseases, which account for almost two thirds of all deaths worldwide. Their early detection and continuous evaluation are fundamental for an improved patient prognosis and reduced socioeconomic impact. Current biosensor technologies are typically based on the analysis of whole blood samples from patients for the detection of disease-specific biomarkers. However, these technologies display serious shortcomings, such as reduced sensitivity and dynamic range, limited in vivo applicability, and lack of continuous monitoring. There is the urgent need for new diagnostic and treatment follow-up tools, which allow for the early detection of the pathology as well as for the continuous monitoring of the physiological responses to specific therapies. During the last years, a new generation of biosensor technologies with improved performance has emerged in the biomedical sector. The combination of advanced biomaterial methods, biochemical tools, and micro/nanotechnology approaches has resulted in the development of innovative three-dimensional (3D) biosensor platforms for advanced medical diagnosis. In this review, we report the most recent advances in the field of 3D biosensors for clinical applications, focusing on the diagnosis and monitoring of cardiovascular diseases, cancer, and diabetes. We discuss about their clinical performance compared to standard biosensor technologies, their implantable capability, and their integration into microfluidic devices to develop clinically-relevant models. Overall, we anticipate that 3D biosensors will drive us toward a new paradigm in medical diagnosis, resulting in real-time in vivo biosensors capable to significantly improve patient prognosis.

Nitrogen-containing three-dimensional biomass porous carbon materials as an efficient enzymatic biosensing platform for glucose sensing

Schematic illustration of the fabrication and structure of the 3D-CVS/GOD electrode.

Hydrogel Actuators and Sensors for Biomedical Soft Robots: Brief Overview with Impending Challenges

There are numerous developments taking place in the field of biorobotics, and one such recent breakthrough is the implementation of soft robots-a pathway to mimic nature's organic parts for research purposes and in minimally invasive surgeries as a result of their shape-morphing and adaptable features. Hydrogels (biocompatible, biodegradable materials that are used in designing soft robots and sensor integration), have come into demand because of their beneficial properties, such as high water content, flexibility, and multi-faceted advantages particularly in targeted drug delivery, surgery and biorobotics. We illustrate in this review article the different types of biomedical sensors and actuators for which a hydrogel acts as an active primary material, and we elucidate their limitations and the future scope of this material in the nexus of similar biomedical avenues.

Guar Gum-Grafted Terpolymer Hydrogels for Ligand-Selective Individual and Synergistic Adsorption: Effect of Comonomer Composition

Grafting of guar gum (GG) and in situ strategic attachment of acrylamidosodiumpropanoate (ASP) via solution polymerization of acrylamide (AM) and sodium acrylate (SA) resulted in the synthesis of a sustainable GG-g-(AM-co-SA-co-ASP)/GGAMSAASP interpenetrating polymer network (IPN)-based smart superadsorbent with excellent physicochemical properties and reusability, through systematic optimization by response surface methodology (RSM) for removal of methyl violet (MV) and/or Hg(II). The relative effects of SA/AM ratios, in situ allocation of ASP, grafting of GG into the AMSAASP terpolymer, ligand-selective superadsorption mechanism, and relative microstructural changes in individually/synergistically-adsorbed MV-/Hg(II)-/Hg(II)-MV-GGAMSAASPs were determined by extensive analyses using Fourier transform infrared (FTIR), proton nuclear magnetic resonance, ultraviolet-visible (UV-vis), and O 1s-/N 1s-/C 1s-/Hg 4f7/2,5/2-X-ray photoelectron spectroscopies, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, field emission scanning electron microscopy, and energy-dispersive spectroscopy and were supported by % gel content, pHPZC, and % graft ratio. The ionic/covalent-bonding, monodentate, bidentate bridging, and bidentate chelating coordination between GGAMSAASPs and Hg(II), and MV+-Hg(II) bonding were rationalized by FTIR, UV-vis, fitment of kinetics data to the pseudo-second-order model, and thermodynamic parameters. The maximum adsorption capacities of 49.12 and 53.28 mg g-1 were determined for Hg(II) and MV, respectively, under optimized conditions.

Phenylalanine and derivatives as versatile low-molecular-weight gelators: design, structure and tailored function

Phenylalanine (Phe) is an essential amino acid classified as neutral and nonpolar due to the hydrophobic nature of the benzyl side chain.

Three-Dimensional, Enzyme Biohydrogel Electrode for Improved Bioelectrocatalysis

Higher loading of enzymes on electrodes and efficient electron transfer from the enzyme to the electrode are urgently needed to enhance the current density of biofuel cells. The two-dimensional nature of the electrode surface limits the enzyme loading on the surface, and unfavorable interactions with electrode surfaces cause inactivation of the enzyme. Benign biohydrogels are designed here to address enzyme degradation, and the three-dimensional nature of the biohydrogel enhanced the enzyme density per unit area. A general strategy is demonstrated here using a redox active enzyme glucose oxidase embedded in a bovine serum albumin biohydrogel on flexible carbon cloth electrodes. In the presence of ferricyanide as a mediator, this bioelectrode generated a maximum current density (j_max) of 13.2 mA·cm^-2 at 0.45 V in the presence of glucose with a sensitivity of 67 μA·mol^-1·cm^-2 and a half-life of >2 weeks at room temperature. A strong correlation of current density with water uptake by the biohydrogel was observed. Moreover, a soluble mediator (sodium ferricyanide) in the biohydrogel enhanced the current density by ∼1000-fold, and citrate-phosphate buffer has been found to be the best to achieve the maximum current density. A record 2.2% of the loaded enzyme was electroactive, which is greater than the highest value reported (2-fold). Stabilization of the enzyme in the biohydrogel resulted in retention of the enzymatic activity over a wide range of pH (4.0-8.0). We showed here that biohydrogels are excellent media for enzymatic electron transfer reactions required for bioelectronics and biofuel cell applications.

Hydrogel Based Biosensors for In Vitro Diagnostics of Biochemicals, Proteins, and Genes

Hydrogel-based biosensors have drawn considerable attention due to their various advantages over conventional detection systems. Recent studies have shown that hydrogel biosensors can be excellent alternative systems to detect a wide range of biomolecules, including small biochemicals, pathogenic proteins, and disease specific genes. Due to the excellent physical properties of hydrogels such as the high water content and stimuli-responsive behavior of cross-linked network structures, this system can offer substantial improvement for the design of novel detection systems for various diagnostic applications. The other main advantage of hydrogels is the role of biomimetic three-dimensional (3D) matrix immobilizing enzymes and aptamers within the detection systems, which enhances their stability. This provides ideal reaction conditions for enzymes and aptamers to interact with substrates within the aqueous environment of the hydrogel. In this review, we have highlighted various novel detection approaches utilizing the outstanding properties of the hydrogel. This review summarizes the recent progress of hydrogel-based biosensors and discusses their future perspectives and clinical limitations to overcome.

One-Pot Synthesis of Fe3O4 Nanoparticle Loaded 3D Porous Graphene Nanocomposites with Enhanced Nanozyme Activity for Glucose Detection

A novel one-pot strategy is proposed to fabricate 3D porous graphene (3D GN) decorated with Fe₃O₄ nanoparticles (Fe₃O₄ NPs) by using hemin as iron source. During the process, graphene oxide was simultaneously reduced and self-assembled to form 3D graphene hydrogel while Fe₃O₄ NPs synthesized from hemin distributed uniformly on 3D GN. The preparation process is simple, facile, economical, and green. The obtained freeze-dried product (3D GH-5) exhibits outstanding peroxidase-like activity. Compared to the traditional 2D graphene-based nanocomposites, the introduced 3D porous structure dramatically improved the catalytic activity, as well as the catalysis velocity and its affinity for substrate. The high catalytic activity could be ascribed to the formation of Fe₃O₄ NPs and 3D porous graphene structures. Based on its peroxidase-like activity, 3D GH-5 was used for colorimetric determination of glucose with a low detection limit of 0.8 μM.

Amplified impedimetric aptasensor combining target-induced DNA hydrogel formation with pH-stimulated signal amplification for the heparanase assay

Herein, a novel electrochemical impedimetric biosensor for the heparanase (HPA) assay was developed based on target protein-induced DNA hydrogel formation, followed by pH-stimulation of the hydrogel density to increase the signal amplification. The method involved the synthesis of two different copolymer chains, consisting of two cooperatively functioning cross-linking elements, where one element was associated with the HPA-response and the other one with the pH-response. Initially, single-strand DNA as a capture probe was modified on the electrode surface. In the presence of HPA, the HPA-responsive element binding to HPA-induced DNA hybridization between the two copolymer chains and captured DNA, giving rise to the formation of a low-density polymer hydrogel film on the electrode surface and it obtaining an obvious impedimetric response. A significant signal enhancement was observed when changing the pH of the hydrogel film to 5.0, which could be ascribed to the fact that the pH-responsive element can fold into four-stranded i-motif structures at pH 5.0, leading to the increase in density of the hydrogel film. By implementing the DNA hydrogel to induce an impedimetric response change, this impedimetric biosensor exhibited an excellent analytical performance towards the HPA quantitative assay, with a low detection limit of 0.003 pg mL^-1. This new method provides a versatile signal amplification method and paves a new way to construct impedimetric sensors for bioassays.

Thermoresponsive Semi-IPN Hydrogel Microfibers from Continuous Fluidic Processing with High Elasticity and Fast Actuation

Hydrogels with rapid and strong response to external stimuli and possessing high elasticity and strength have been considered as platform materials for numerous applications, e.g., in biomaterials engineering. Thermoresponsive hydrogels based on semi-interpenetrating polymer networks (semi-IPN) featuring N-isopropylacrylamide with copolymers of poly(N-isopropylacrylamide-co-hydroxyethyl methacrylate) p(NIPAM-HEMA) chains are prepared and described. The copolymer was characterized by FTIR, NMR, and GPC. The semi-IPN structured hydrogel and its responsive properties were evaluated by dynamic mechanical measurements, SEM, DSC, equilibrium swelling ratio, and dynamic deswelling tests. The results illustrate that the semi-IPN structured hydrogels possess rapid response and high elasticity compared to conventional pNIPAM hydrogels. By using a microfluidic device with double coaxial laminar flow, we succeeded in fabricating temperature responsive ("smart") hydrogel microfibers with core-shell structures that exhibit typical diameters on the order of 100 μm. The diameter of the fibers can be tuned by changing the flow conditions. Such hydrogel fibers can be used to fabricate "smart" devices, and the core layer can be potentially loaded with cargos to incorporate biological function in the constructs. The platforms obtained by this approach hold promise as artificial "muscles", and also "smart" hydrogel carriers providing a unique biophysical and bioactive environment for regenerative medicine and tissue engineering.

Efficient electrochemical detection of cancer cells on in situ surface-functionalized MoS2nanosheets

In situsurface functionalization by reactant molecules (thiourea) is feasible to engineer MoS₂surfaces with rich amino groups, leading to facile antigen immobilization and thus selective recognition of cancer cells.

A simple electrochemical biosensor based on AuNPs/MPS/Au electrode sensing layer for monitoring carbamate pesticides in real samples

A simple electrochemical biosensor for quantitative determination of carbamate pesticide was developed based on a sensing interface of citrate-capped gold nanoparticles (AuNPs)/(3-mercaptopropyl)-trimethoxysilane (MPS)/gold electrode (Au). The biosensor was fabricated by firstly assembling three-dimensional (3D) MPS networks on Au electrode and subsequently assembling citrate-capped AuNPs on 3D MPS network via AuS bond. The interface of AuNPs/MPS/Au was negatively charged originating from the citrate coated on AuNPs that would repulse the negatively charged ferricyanide ([Fe(CN)6](3-/4-)) to produce a negative response. In the presence of acetylcholinesterase (AChE) and acetylthiocholine (ATCl), the AChE catalyzes the hydrolysis of ATCl into positively charged thiocholine which would replace the citrate on AuNPs through the strong AuS bond and convert the negative charged surface to be positively charged. The resulted positively charged AuNPs/MPS/Au then attracted the [Fe(CN)6](3-/4-) to produce a positive response. Based on the inhibition of carbamate pesticides on the activity of AChE, the pesticide could be quantitatively determined at a very low potential. The linear range was from 0.003 to 2.00 μM. The sensing platform was also proved to be suitable for carbamate pesticides detection in practical sample.

Non-enzymatic electrochemical sensing platform based on metal complex immobilized carbon nanotubes for glucose determination

Nickel salophen (where salophen is N,N′-bis(salicylidene)-1,2-phenylenediamine) is immobilized on multiwall carbon nanotubes. This new material is utilized for electrocatalytic oxidization and sensitive determination of glucose in human blood samples.

A porous CuO nanowire-based signal amplification immunosensor for the detection of carcinoembryonic antigens

A novel electrochemical immunosensor was developed for the detection of CEA based on CNTs–AuNPs as a platform and pCuOw@Fc as labels. The immunosensor showed enhanced electrochemical performance toward the detection of CEA.

Peptide flatlandia: a new-concept peptide for positioning of electroactive probes in proximity to a metal surface

A helical hexapeptide was designed to link in a rigid parallel orientation to a gold surface. The peptide sequence of the newly synthesized compound is characterized by the presence of two 4-amino-1,2-dithiolane-4-carboxylic acid (Adt) residues (positions 1 and 4) to promote a bidentate interaction with the gold surface, two L-Ala residues (positions 2 and 5) and two-aminoisobutyric acid (Aib) residues (positions 3 and 6) to favor a high population of the 310-helix conformation. Furthermore, a ferrocenoyl (Fc) probe was inserted at the N-terminus to investigate the electronic conduction properties of the peptide. X-Ray photoelectron spectroscopy and scanning tunneling microscopy techniques were used to characterize the binding of the peptide to the gold surface and the morphology of the peptide layer, respectively. Several electrochemical (cyclic voltammetry, chronoamperometry, square wave voltammetry) techniques were applied to analyze the electrochemical activity of the Fc probe, along with the influence of the peptide 3D-structure and the peptide layer morphology on electron transfer processes.

Layer-by-Layer Self-Assembling Gold Nanorods and Glucose Oxidase onto Carbon Nanotubes Functionalized Sol-Gel Matrix for an Amperometric Glucose Biosensor

A novel amperometric glucose biosensor was fabricated by layer-by-layer self-assembly of gold nanorods (AuNRs) and glucose oxidase (GOD) onto single-walled carbon nanotubes (SWCNTs)-functionalized three-dimensional sol-gel matrix. A thiolated aqueous silica sol containing SWCNTs was first assembled on the surface of a cleaned Au electrode, and then the alternate self-assembly of AuNRs and GOD were repeated to assemble multilayer films of AuNRs-GOD onto SWCNTs-functionalized silica gel for optimizing the biosensor. Among the resulting glucose biosensors, the four layers of AuNRs-GOD-modified electrode showed the best performance. The sol-SWCNTs-(AuNRs-GOD)₄/Au biosensor exhibited a good linear range of 0.01–8 mM glucose, high sensitivity of 1.08 μA/mM, and fast amperometric response within 4 s. The good performance of the proposed glucose biosensor could be mainly attributed to the advantages of the three-dimensional sol-gel matrix and stereo self-assembly films, and the natural features of one-dimensional nanostructure SWCNTs and AuNRs. This study may provide a new facile way to fabricate the enzyme-based biosensor with high performance.

Combination of dynamic magnetophoretic separation and stationary magnetic trap for highly sensitive and selective detection of Salmonella typhimurium in complex matrix

Foodborne illnesses have always been a serious problem that threats public health, so it is necessary to develop a method that can detect the pathogens rapidly and sensitively. In this study, we designed a magnetic controlled microfluidic device which integrated the dynamic magnetophoretic separation and stationary magnetic trap together for sensitive and selective detection of Salmonella typhimurium (S. typhimurium). Coupled with immunomagnetic nanospheres (IMNs), this device could separate and enrich the target pathogens and realize the sensitive detection of target pathogens on chip. Based on the principle of sandwich immunoassays, the trapped target pathogens identified by streptavidin modified QDs (SA-QDs) were detected under an inverted fluorescence microscopy. A linear range was exhibited at the concentration from 1.0×10(4) to 1.0×10(6) colony-forming units/mL (CFU/mL), the limit of detection (LOD) was as low as 5.4×10(3) CFU/mL in milk (considering the sample volume, the absolute detection limit corresponded to 540C FU). Compared with the device with stationary magnetic trap alone, the integrated device enhanced anti-interference ability and increased detection sensitivity through dynamic magnetophoretic separation, and made the detection in complex samples more accurate. In addition, it had excellent specificity and good reproducibility. The developed system provides a rapid, sensitive and accurate approach to detect pathogens in practice samples.

Ultrasensitive immunoassay for CA125 detection using acid site compound as signal and enhancer

A novel sensitive electrochemical immunosensor was proposed for detection of CA125 based on ferrocenecarboxylic acid (FA), HCl-doped polyaniline (H-PANI) and chitosan hydrochloride (CS-HCl), which were used as substrate materials to generate signal and to enlarge specific surface area. The composite of these three materials (acid center compound, FA@H-PANI@CS-HCl) can be connected by hydrogen (H) in each molecule. Ag@Co3O4 nanosheets were used in the immunosensor to amplify the antibody capacity and to enhance the sensitivity of the immunoassay. This kind of sensor was novel, concise and it is the first time to be used in the detection of CA125. The biosensor exhibited low detection limit (0.25 pg/mL) and wide linear range (0.001-25 ng/mL). The stability, selectivity and reproducibility were acceptable. Serum sample analysis proved that the proposed sensor owned well precision and it might be used in potential clinic testing application in the future.