Novel Inorganic Mesoporous Material with Chiral Nematic Structure Derived from Nanocrystalline Cellulose for High-Resolution Gas Chromatographic Separations

Subcomponent self-assembly construction of tetrahedral cage FeII4L4 for high-resolution gas chromatographic separation

Metal organic cages (MOCs), as an emerging discrete supramolecular compounds, have received widespread attention in separation, biomedicine, gas capture, catalysis, and molecular recognition due to their porosity, adjustability and stability. Herein, we present a new chiral MOC FeII4L4 coated capillary column prepared for gas chromatographic (GC) separation of different types of organic compounds, including n-alkanes, n-alcohols, alkylbenzenes, isomers, especially for racemic compounds. There are 20 different kinds of racemates (e.g., alcohols, ethers, epoxides, esters, alkenes, and aldehydes) were well resolved on the FeII4L4 chiral column and a maximum resolution value for 1-phenyl-1-propanol reaches 6.17. The FeII4L4 coated column exhibited high column efficiency (3100 plates m-1 for n-dodecane) and good enantiomeric resolution complementary to that of a commercial β-DEX 120 column and the previously reported chiral MOC [Fe4L6] (ClO4)8 coated column. The relative standard deviation (RSDs) of the peak area and retention time of glycidol and nitrotoluene were below 1.2 %. This study reveals that chiral MOCs have good application prospects in chromatographic separation.

Recent advances of optically active helical polymers as adsorbents and chiral stationary phases for chiral resolution

Chiral resolution is very important and still a big challenge due to different biological activity and same physicochemical property of one pair (R)- and (S)-isomer. There is no doubt that chiral selectors are essentially needed for chiral resolution, which can stereoselectively interact with a pair of isomers. To date, a large amount of optically active helical polymers as chiral selectors have been synthesized via two strategies. First, the target helical polymers are derived from natural polysaccharide such as cellulose and amylose. Second, they can be synthesized by polymerization of chiral monomers. Alternatively, an achiral polymer is prepared first followed by static or dynamic chiral induction. Furthermore, a part of them is harnessed as chiral stationary phases for chromatographic chiral separation and as chiral adsorbents for enantioselective adsorption/crystallization, resulting in good enantioseparation efficiency. In summary, the present review will focus on recent progress of the polymers with optical activity for chiral resolution, especially the literature published in the past 10 years. In addition, development prospects and future challenges of optically active helical polymers will be discussed in detail.

A chiral multi-shelled mesoporous carbon nanospheres used for high-resolution gas chromatography separations

Herein, a chiral multishelled mesoporous carbon nanospheres (MCNs) with unique spiral multishelled hollow mesoporous chiral structure is synthesized; the MCNs can be used as stationary phases for high-resolution gas chromatography (GC) and have good separation capacity. The successful preparation of MCNs is verified by a variety of characterizations. In addition, the MCNs-coated capillary column shows excellent separation performance for n-alkanes, n-alcohols, aromatic compounds, and esters, and it has a faster analysis time than the HP-5 commercial capillary column. The chromatography separation performance for various isomers and racemates of the MCNs stationary phase was evaluated, and it showed good separation capability for amino acid derivatives. The MCNs-coated capillary column has been demonstrated to present good reproducibility and stability. In summary, all of the chromatography experiments in this work indicate that this new stationary phase of the MCNs has good application potential for GC capillary separation.

Chiral hydrogen-bonded organic frameworks used as a chiral stationary phase for chiral separation in gas chromatography

Hydrogen-bonded organic frameworks (HOFs) are two dimensional (2D) or three dimensional (3D) porous crystalline materials constructed by Hydrogen bond interaction. In recent years, a variety of functional HOF materials have been successfully synthesized and used in structural identification, environmental pollutant removal, chiral resolution, drug delivery, fluorescence sensing, etc. Here, we first reported that a HOF to coated capillary column for high-resolution gas chromatographic separation of a wide range of analytes, including n-alkanes, n-alcohols, polycyclic aromatic hydrocarbons, and positional isomers, especially for racemates, the HOFs column showed excellent separation repeatability and reproducibility. The relative standard deviation (RSD) values for the retention times were in the range of 0.37-2.43% for run to run (n = 3), 0.38-2.51% for day-to-day (n = 3), and 0.31-2.54% for column-to-column (n = 3), respectively. Moreover, we applied density-functional theory to calculate the adsorption of enantiomers in HOF structures. This work proved that the HOFs had great application prospects as stationary phase in gas chromatography.

Recent progress in the development of chiral stationary phases for high-performance liquid chromatography

Separations and analyses of chiral compounds are important in many fields, including pharmaceutical production, preparation of chemical intermediates, and biochemistry. High-performance liquid chromatography using a chiral stationary phase is regarded as one of the most valuable methods for enantiomeric separation and analysis because it is highly efficient, is broadly applicable, and has powerful separation capability. The focus for development of this method is the identification of novel chiral stationary phases with superior recognition performance and good stability. The present article reviews recent progress in the development of new chiral stationary phases for high-performance liquid chromatography between January 2018 and June 2021. These newly reported chiral stationary phases are divided into three categories: small organic molecule-based (cyclodextrin and its derivatives, macrocyclic antibiotics, cinchona alkaloids, and other low molecular weight chiral molecules), macromolecule-based (cellulose and amylose derivatives, chitin and chitosan derivatives, and synthetic helical polymers) and chiral porous material-based (chiral metal-organic frameworks, chiral covalent organic frameworks, and chiral inorganic mesoporous silicas). Each type of chiral stationary phase is discussed in detail.

Optically active porous hybrid particles constructed by alkynylated cellulose nanocrystals, helical substituted polyacetylene, and inorganic silica for enantio-differentiating towards naproxen

This article reports on a novel type of ternary chiral porous hybrid particles (TCPHPs) constructed by alkynylated cellulose nanocrystals (A-CNCs), helical substituted polyacetylene, and inorganic silica. The resulting TCPHPs combine the respective advantages of the three components. A-CNCs serve as stabilizer, co-monomer, and chiral source simultaneously and transfer their chirality to the resulting helical substituted polyacetylenes in the course of copolymerization with achiral acetylenic monomer following "sergeants and soldiers rule". Helical substituted polyacetylenes form chiral helical structures and thus endow TCPHPs with the anticipated optical activity. Inorganic silica constitutes the rigid framework and is covalently bonded with the organic components through hydrolysis of Si-O-Et groups. Phase separation between the organic and inorganic components renders TCPHPs with abundant pores. Scanning electron microscope (SEM) images confirm the formation of spherical particles with porous structures. Circular dichroism spectra demonstrate the optical activity of the chiral hybrid particles. The as-prepared TCPHPs exhibit capacity for enantio-differentiating performance towards chiral naproxen.

Bottom-Up Synthesis of Helical Plasmonic Nanorods and Their Application in Generating Circularly Polarized Luminescence

Chiral growth and chirality transfer associated with plasmonic nanostructures have rejuvenated the field of chirality. As the precise regioselective growth of inorganic crystals into chiral shapes at the nanoscale is extremely challenging, "bottom-up" synthesis of intrinsically chiral nanoparticles with structural stability is obviously attractive and important. With the thiolated bimolecular cosurfactants, we demonstrated a chemical strategy for the synthesis of intrinsically helical plasmonic nanorods (HPNRs) with strong and tailorable plasmonic circular dichroism (PCD) responses, deriving from the zwitterionic interactions between the -NH₃⁺ and -COO^- groups of the cysteine molecules (Cys). The influence of structural parameters of HPNRs on PCD responses was analyzed systematically by theoretical simulations. Among the different structural parameters, the pitch depth was found to have the greatest impact on the PCD signals, in agreement with the experimental results. Moreover, the obtained HPNRs with the strong, tunable, and stable chiroptical properties were found to be able to induce circularly polarized luminescence of achiral luminophores. Due to the generality of this effect, this chiral plasmonic nanostructure may have great potential for use in the fields of chiral sensors, chiral catalysis, and displays.

[Preparation and application of chiral silica gel spheres based on L-glutamic]

无机介孔硅球因其具有足够的机械强度、热稳定性,以及适应多种流动相的优点,成为高效液相色谱(HPLC)柱填料中使用最广泛和最重要的材料。但在此研究领域中,并未见球形的全无机手性硅胶用作HPLC手性固定相。该文以无机球形介孔硅胶作为研究对象,通过堆砌硅珠法,以硅溶胶为原料,L-谷氨酸(L-Glu)为手性源,在手性环境中制造出脲醛树脂与胶体二氧化硅混合的小球,在550 ℃高温下煅烧除去树脂部分,制备基于L-Glu的无机介孔硅胶球。通过元素分析、红外光谱、扫描电镜、透射电镜和氮气吸附等表征证明这是一种具有规则球形的手性硅胶球,其手性来源于硅胶球自身的骨架和孔结构。将L-Glu手性硅胶球作为固定相制备了HPLC色谱柱,以正己烷-异丙醇(9∶1, v/v)作为流动相,流速为0.1 mL/min,考察了该手性柱对一系列外消旋化合物的拆分性能。实验表明,该手性柱拆分了15种外消旋化合物,其中特罗格尔碱、吡喹酮、3-苄氧基-1,2-丙二醇、1,2-环氧己烷、3-羟基-2-丁酮、2-甲基四氢呋喃-3-酮、异丙基缩水甘油醚达到基线分离;还分离了10种苯系位置异构体,o,m,p-氨基苯酚、o,p-氯苯酚、o,m,p-碘苯胺、o,m,p-甲苯胺、o,m,p-二硝基苯、o,m,p-氯苯胺、o,m,p-硝基苯酚、o,m,p-溴苯胺达到基线分离。实验表明,L-Glu手性硅胶球在手性分离方面具有良好的可行性,与普通硅胶相比不需要进一步修饰就可以有较好的手性分离效果,是一种低成本、制备便捷的手性无机硅胶固定相。

Homochiral metal-organic frameworks for enantioseparation

Obtaining homochiral compounds is of high importance to human health and environmental sustainability. Currently, enantioseparation is one of the most effective approaches to obtain homochiral compounds. Thanks to their controlled synthesis and high efficiency, homochiral metal-organic frameworks (HMOFs) are one of the most widely studied porous materials to enable enantioseparation. In this review, we discuss the chiral pocket model in depth as the key to unlock enantioselective separation mechanisms in HMOFs. In particular, we classify our discussion of these chiral pockets (also regarded as "molecular traps") into: (a) achiral/chiral linker based helical channels as a result of packing modality; and (b) chiral pores inherited from chiral ligands. Driven by a number of mechanisms of enantioseparation, conceptual advances have been recently made in the design of HMOFs for achieving high enantioseparation performances. Herein, these are systematically categorised and discussed. Further we elucidate various applications of HMOFs as regards enantioseparation, systematically classifying them into their use for purification and related analytical utility according to the reported examples. Last but not the least, we discuss the challenges and perspectives concerning the rational design of HMOFs and their corresponding enantioseparations.

A chiral metal-organic cage used as the stationary phase for gas chromatography separations

Chiral metal-organic cages (MOCs) are a new type of porous materials with unique molecular recognition ability, which have received research attention as a chiral stationary phase (CSP) for gas chromatography (GC). Herein, we report the detailed investigation of a chiral MOC ([Cu₁₂(L_PA)₁₂(H₂O)₁₂], PA = L-phenylalanine, MOC-PA) as a novel stationary phase for GC separations. The MOC-PA capillary column exhibited a high-resolution performance for a wide range of analytes, including n-alkanes, n-alcohols, esters, aromatic compounds and the Grob mixture, positional isomers and racemates. In particular, MOC-PA coated column displayed good resolution and performance for amino acid derivatives. Moreover, the MOC-PA column showed excellent separation repeatability and reproducibility. The relative standard deviation (RSD) values for the retention times were in the range of 0.16-0.30% for run to run (n = 3), 0.31-0.77% for day-to-day (n = 3), and 3.6-4.7% for column-to-column (n = 3), respectively. The experimental results showed that MOC-PA had great potential as a GC stationary phase.

Chiral Mesoporous Silica Materials: A Review on Synthetic Strategies and Applications

Because of its tunable textural properties and chirality feature, chiral mesoporous silica (CMS) gained significant consideration in many fields and has been developed rapidly in recent years. In this review, we provide an overview of synthesis strategies for fabricating CMS together with its main applications. The properties of CMS, including morphology and mesostructures and enantiomer excess (ee), can be altered according to the synthetic conditions during the synthesis process. Despite its primary stage, CMS has attracted extensive attention in many fields. In particular, CMS nanoparticles are widely used for enantioselective resolution and adsorption of chiral compounds with desirable separation capability. Also, CMS acts as a promising candidate for the effective delivery of chiral or achiral drugs to produce a chiral-responsive manner. Moreover, CMS also plays an important role in chromatographic separations and asymmetric catalysis. There has been an in-depth review of the synthetic methods and mechanisms of CMS. And this review aims to give a deep insight into the synthesis and application of CMS, especially in recent years, and highlights the significance that it may have in the future.

Enantioselective Recognition of Chiral Tryptophan with Achiral Glycine through the Strategy of Chirality Transfer

Glycine (Gly), an achiral amino acid, has never been reported for enantioselective recognition owing to the absence of chiral sites. Herein, a facile strategy of chirality transfer is proposed to endow Gly with chirality. Optically active CuO, L-CuO, is first prepared, which can be used for the decoration of Gly through the formation of the Cu(Gly)₂ complex. Successful chirality transfer from L-CuO to Gly is confirmed by circular dichroism (CD) spectra. The formation of the Cu(Gly)₂ complex is further confirmed by Fourier transform infrared spectra and X-ray photoelectron spectroscopy. Next, the resultant L-CuO-Gly is used for chiral analysis of the isomers of tryptophan (Trp). Because of the higher affinity of L-CuO-Gly toward L-Trp than its isomer, the Trp isomers exhibit significant differences in their oxidation peak currents at the L-CuO-Gly-modified glassy carbon electrode (GCE) (I_L-Trp/I_D-Trp = 5.24). Finally, the practicability of the developed L-CuO-Gly/GCE is assessed, and the results indicate that it could be a reliable chiral sensor for the quantitative analysis of Trp isomers in nonracemic mixtures.

Dual Response of Photonic Films with Chiral Nematic Cellulose Nanocrystals: Humidity and Formaldehyde

Manipulating functional stimuli-responsive materials has been a hot topic in the research of smart sensors and anticounterfeiting encryption. Here, a novel functional chiral nematic cellulose nanocrystal (CNC) film showing dual responsiveness to humidity and formaldehyde gas was fabricated. The chiral nematic CNC iridescent film could respond to environmental humidity and formaldehyde gas changes by reversible motion. Interestingly, the humidity sensitivity of the CNC iridescent film could be gated by exposing the film to formaldehyde gas. At the same time, the formaldehyde-responsive behavior is strongly affected by the relative humidity (RH), and the response range could be tuned by changing the RH over a wide range. Importantly, the formaldehyde-induced color change could be altered from invisible to visible by the naked eye when the film was exposed to a humid environment. The mechanism of this dual response of the CNC iridescent film is ascribed to the synergistic effect of cooperation and competition between water and formaldehyde molecules by constructing physical cross-linking networks by hydrogen bonds among water, formaldehyde, and CNCs. Furthermore, the "RH-concentration of formaldehyde gas-color" ternary colorimetric system was simulated, which is thought to endow the CNC iridescent film with great potential to act as a sensor in the convenient visible detection of gaseous formaldehyde. Furthermore, this work provided a promising strategy to design multi-gas-sensitive devices with convenient detection, good stability, and excellent reversibility.

A hydroxyl-functionalized homochiral porous organic cage for gas chromatographic separations

A hydroxyl-functionalized homochiral porous organic cage (POC) was synthesized and characterized by FTIR, NMR, thermogravimetric analysis (TGA), MALDI-TOF-MS, and elemental analysis. The synthesized homochiral POC was used as stationary phase to prepare a capillary gas chromatography (GC) column by a static coating method. The fabricated column shows excellent selectivity not only for the separation of positional isomers but also for the resolution of various racemates. Thirty-nine racemates have been resolved on the column, including alcohols, diols, halohydrocarbons, epoxides, esters, lactones, ketones, ethers, and organic acids. Compared to the commercial β-DEX 120 column and previously reported chiral POCs (CC3-R, CC9, and CC10)-coated columns, there are 11, 10, 24, and 15 tested racemates that cannot be resolved on β-DEX 120 column, CC3-R column, CC9 column, and CC10 column, respectively. This reveals that the fabricated column has prominent complementarity or superior separation performance to these columns in enantioseparation. Besides, the fabricated column can achieve some enantioseparations which are not possible using all previously reported chiral POC-based columns. Some positional isomers (xylenes, dichlorobenzenes, dibromobenzenes, nitrochlorobenzenes, and nitrobromobenzenes) were also separated with high-resolution values. The column exhibits good repeatability, reproducibility, and stability. The relative standard deviation (RSD) values of retention times were 0.03-0.18%, 0.11-0.92%, and 2.1-6.6% for run-to-run (n = 5), day-to-day (n = 5), and column-to-column (n = 3), respectively. The experimental results demonstrate the great potential of POCs for practical application in GC. Graphical Abstract A hydroxyl-functionalized homochiral porous organic cage was used as stationary phase for gas chromatography separation of racemates and positional isomers. The resolution of racemates mainly depended on hydrogen bonding, π-interaction, host-guest inclusion, steric fit, etc., while separation of positional isomers by shape-selective guest binding.

Photonic actuators with predefined shapes

Developing actuators with multi-responsibility, large deformation, and predefined shapes is critical for the application of actuators in the field of artificial intelligence. Herein, we report the preparation of a new type of unimorph actuators containing phenol-formaldelyde resin (PFR) and graphene oxide (GO) using the chiral nematic structure of cellulose nanocrystals (CNCs) as the template. The so-obtained PFR/GO films have a unimorph structure with an asymmetric distribution of GO across the film. They exhibit synchronous responses of both photonic properties and actuation to humidifying/dehumidifying. Moreover, PFR/GO films can be forged into desired shapes by aldehyde treatment, and thereby are able to produce complex movements. In addition, the objects with predetermined shapes show good shape recovery capability upon many wetting-drying cycles, especially through the treatment with formaldehyde. A mechanism model for shape predetermination by aldehyde treatment is suggested based on experimental details. By further designing the predetermined shapes and patterns, such PFR/GO actuators may hold great promise for smart actuation devices of highly complex movements.

Enantioseparations by Gas Chromatography Using Porous Organic Cages as Stationary Phase

The resolution of chiral compounds into optically pure enantiomers is very important in various fields, such as pharmaceutical, chemical, agricultural, and food industries. Chiral gas chromatography (GC) is one of the efficient methods for enantioseparations of volatile compounds. In recent years, porous materials as stationary phases for chromatographic separations have achieved increasing attention. Porous organic cages (POCs) represent an emerging class of porous materials, which are assembled by discrete organic molecules with shape-persistent and permanent cavities through weak intermolecular forces. This chapter describes several chiral POCs as chiral stationary phases for GC enantioseparations of racemic compounds.

Hybrid Organic-Inorganic Materials Containing a Nanocellulose Derivative as Chiral Selector

Hybrid organic-inorganic materials (HOIM), with high mechanical stability, large surface area, tailored pore size, controlled morphology, and organic loading have shown superior chiral separation performance. In this chapter, the preparation of hybrid organic-inorganic materials of core-shell silica microspheres by a layer-by-layer self-assembly method is described. The enantioseparation performance by high-performance liquid chromatography is illustrated by various types of chiral compounds under normal- and reversed-phase elution conditions. The chiral selector of nanocrystalline cellulose derivative hybrid organic-inorganic materials showed good performance in the separation of enantiomers.

Chiral induction in covalent organic frameworks

Synthetic control over chirality and function is the crowning achievement for metal-organic frameworks, but the same level of control has not been achieved for covalent organic frameworks (COFs). Here we demonstrate chiral COFs (CCOFs) can be crystallized from achiral organic precursors by chiral catalytic induction. A total of nine two-dimensional CCOFs are solvothermally prepared by imine condensations of the C₃-symmetric 1,3,5-triformylphloroglucinol (Tp) with diamine or triamine linkers in the presence of catalytic amount of (R)- or (S)-1-phenylethylamine. Homochirality of these CCOFs results from chiral catalyst-induced immobilization of threefold-symmetric tris(N-salicylideneamine) cores with a propeller-like conformation of one single handedness during crystallization. The CCOF-TpTab showed high enantioselectivity toward chiral carbohydrates in fluorescence quenching and, after postsynthetic modification of enaminone groups located in chiral channels with Cu(II) ions, it can also be utilized as a heterogeneous catalyst for the asymmetric Henry reaction of nitroalkane with aldehydes.

Controlling chirality and function in metal organic frameworks has been an achievement, but very difficult to carry out in covalent organic frameworks. Here the authors show chiral covalent organic frameworks that are crystallized from achiral precursors by chiral catalytic induction.

Functionalization of cellulose nanocrystals for advanced applications

Replacing the widespread use of petroleum-derived non-biodegradable materials with green and sustainable materials is a pressing challenge that is gaining increasing attention by the scientific community. One such system is cellulose nanocrystal (CNC) derived from acid hydrolysis of cellulosic materials, such as plants, tunicates and agriculture biomass. The utilization of colloidal CNCs can aid in the reduction of carbon dioxide that is responsible for global warming and climate change. CNCs are excellent candidates for the design and development of functional nanomaterials in many applications due to several attractive features, such as high surface area, hydroxyl groups for functionalization, colloidal stability, low toxicity, chirality and mechanical strength. Several large scale manufacturing facilities have been commissioned to produce CNCs of up to 1000kg/day, and this has generated increasing interests in both academic and industrial laboratories. In this feature article, we will describe the recent development of functionalized cellulose nanocrystals for several important applications in ours and other laboratories. We will highlight some challenges and offer perspectives on the potentials of these sustainable nanomaterials.

Application of Homochiral Alkylated Organic Cages as Chiral Stationary Phases for Molecular Separations by Capillary Gas Chromatography

Molecular organic cage compounds have attracted considerable attention due to their potential applications in gas storage, catalysis, chemical sensing, molecular separations, etc. In this study, a homochiral pentyl cage compound was synthesized from a condensation reaction of (S,S)-1,2-pentyl-1,2-diaminoethane and 1,3,5-triformylbenzene. The imine-linked pentyl cage diluted with a polysiloxane (OV-1701) was explored as a novel stationary phase for high-resolution gas chromatographic separation of organic compounds. Some positional isomers were baseline separated on the pentyl cage-coated capillary column. In particular, various types of enantiomers including chiral alcohols, esters, ethers and epoxides can be resolved without derivatization on the pentyl cage-coated capillary column. The reproducibility of the pentyl cage-coated capillary column for separation was investigated using nitrochlorobenzene and styrene oxide as analytes. The results indicate that the column has good stability and separation reproducibility after being repeatedly used. This work demonstrates that molecular organic cage compounds could become a novel class of chiral separation media in the near future.

Nanocellulose Derivative/Silica Hybrid Core-Shell Chiral Stationary Phase: Preparation and Enantioseparation Performance

Core-shell silica microspheres with a nanocellulose derivative in the hybrid shell were successfully prepared as a chiral stationary phase by a layer-by-layer self-assembly method. The hybrid shell assembled on the silica core was formed using a surfactant as template by the copolymerization reaction of tetraethyl orthosilicate and the nanocellulose derivative bearing triethoxysilyl and 3,5-dimethylphenyl groups. The resulting nanocellulose hybrid core-shell chiral packing materials (CPMs) were characterized and packed into columns, and their enantioseparation performance was evaluated by high performance liquid chromatography. The results showed that CPMs exhibited uniform surface morphology and core-shell structures. Various types of chiral compounds were efficiently separated under normal and reversed phase mode. Moreover, chloroform and tetrahydrofuran as mobile phase additives could obviously improve the resolution during the chiral separation processes. CPMs still have good chiral separation property when eluted with solvent systems with a high content of tetrahydrofuran and chloroform, which proved the high solvent resistance of this new material.

Circular Dichroism of Chiral Nematic Films of Cellulose Nanocrystals Loaded with Plasmonic Nanoparticles

In the search for induced chiral plasmonic activity, cholesteric films formed by cellulose nanocrystals have attracted great interest as potential hosts for plasmonic nanoparticles. Circular dichroism (CD) spectra of the composite films exhibit two peaks, one of which is ascribed to the cholesteric host and the other one to plasmonic chiroptical activity of the plasmonic nanoparticles. Here we report the results of comprehensive studies of extinction and CD properties of composite films formed by different types of cellulose nanocrystals and different types of plasmonic nanoparticles. We show that the second peak in the CD spectra acquired using CD spectrometers appears as the result of the local reduction of the CD signal of the host material, due to excessive absorption by the nanoparticles, and thus it cannot be interpreted as induced plasmonic chiroptical activity. Instead, we propose an alternative way to measure CD spectra of plasmonic cholesteric films by using Mueller matrix transmission ellipsometry. The results of this study are important for ongoing research in the field of chiral plasmonics and for the optical characterization of a broad range of chiral nematic nanostructured materials.

Chiral nematic porous germania and germanium/carbon films

We report our extensive attempts and, ultimately, success to produce crack-free, chiral nematic GeO2/cellulose nanocrystal (CNC) composite films with tunable photonic properties from the controlled assembly of germanium(iv) alkoxides with the lyotropic liquid-crystalline CNCs in a mixed solvent of water/DMF. With different pyrolysis conditions, the photonic GeO2/CNC composites can be converted into freestanding chiral nematic films of amorphous GeO2, and semiconducting mesoporous GeO2/C and Ge/C replicas. These new materials are promising for chiral separation, enantioselective adsorption, catalysis, sensing, optoelectronics, and lithium ion batteries. Furthermore, the new, reproducible synthesis strategies developed may be applicable for constructing other composites and porous materials with chiral nematic ordering.