Light and molecular ions: the emergence of vacuum UV single-photon ionization in MS

Characterizing carbonaceous aerosols in residential coal combustion: Insights from thermal/spectral carbon analyzer coupled with photoionization mass spectrometry analysis

This study aims to identify unique signatures from residential coal combustion in China across various combustion conditions and coal types. Using a Thermal/Spectral Carbon Analyzer with a Photoionization Time-of-Flight Mass Spectrometer (TSCA-PI-TOF-MS), we focus on the optical properties and organic mass spectra of the emissions. Bituminous coal emerged as the primary emitter of total carbon, releasing 729 μg C/mg PM2.5 under smoldering and 894 μg C/mg PM2.5 under flaming. Carbon fractions mainly comprised OC1 and OC2, except for anthracite's dominance of EC1 under smoldering. Pyrolysis carbon absorption shifted from 405, 445 and 532 nm during smoldering to near-infrared bands (635-980 nm) during flaming for both bituminous and anthracite coal. Conversely, clean coal exhibited an inverse trend, attributed to additives enhancing oxygen-containing organic compounds and long-chain hydrocarbons released in charring process. Sample of bituminous coal began charring at OC3 step, while anthracite began earlier at OC2 step, particularly pronounced under flaming. Clean coal displayed unconventional charring at OC1 step under smoldering condition, producing signature compounds like butenal, methylfuran, furanylalcohol, and naphthol. The mass spectra of bituminous coal featured characteristic peaks, including m/z 192 (methylphenanthrene), 206, 220 (alkylated phenanthrenes), and 234 (retene). Anthracite coal showed a potential tracer at m/z 223, shifting from OC1 in smoldering to OC2 in flaming. Clean coal under flaming condition exhibited elevated levels of aromatic compounds, indicating potential toxicity, with peaks at m/z 178 (phenanthrene), 228 (chrysene/benz[a]anthracene), 234 (retene), 242 (methylchrysene), and 252 (benzo[a]pyrene, benzo[k]fluoranthene). Results also showed that the broader mass spectra range in the OC3 and OC4 steps across all coal types suggests that high-temperature pyrolysis promotes diversity. These findings contribute to refined source apportionment of carbon emissions from residential coal combustion and provide the scientific basis for the formulation of air pollution prevention strategies, crucial for coal-dependent regions.

Pressure-Driven Switching of Photoelectron Impact Ionization-Chemical Ionization/Penning Ionization in Vacuum Ultraviolet Photoionization Mass Spectrometry

Vacuum ultraviolet photoionization (VUV-PI) is a soft ionization technique that operates under pressures ranging from vacuum to ambient pressure. VUV-PI has played an essential role in direct sampling mass spectrometry. In this study, new ionization processes initiated by photoelectrons have been studied through the inclusion of a radio frequency (RF) electric field at different pressures. After deducting the contribution of single photoionization (SPI), the signal intensity of 1 ppmv toluene (C7H8+) in Ar was approximately 5-fold higher than that in N2. Mixed gases with different ionization energies (IEs) and excitation energies (EEs) were further investigated to reveal that metastable species were involved in the enhancement process. Reactant ions were produced by photoelectron impact ionization (PEI), which further triggered ion-molecule reactions, i.e., chemical ionization (CI). Metastable species were produced by photoelectron impact excitation (PEE), which further triggered Penning ionization (PenI). Analytes with IEs above 10.6 eV, such as CO2 (IE = 13.78 eV) and CHCl3 (IE = 11.37 eV), could be sensitively ionized by PenI with a sensitivity comparable to SPI. Except for the contribution of SPI, the dominant ionization process was switched from PEI-CI to PenI when the pressure was elevated from 50 to 500 Pa, as the electron energy gradually decreased and was only able to produce metastable states based on the kinetic energy balance equation of electrons. The conversion processes and conditions from PEI-CI to PenI will provide novel insights to develop new selective and sensitive VUV-PI sources and understand the ionization mechanism in other discharge ionization sources.

Rapid online analysis of n-alkanes in gaseous streams via APCI mass spectrometry

Online monitoring of dynamic chemical processes involving a wide volatility range of hydrocarbon species is challenging due to long chromatographic measurement times. Mass spectrometry (MS) overcomes chromatographic delays. However, the analysis of n-alkane mixtures by MS is difficult because many fragment ions are formed, which leads to overlapping signals of the homologous series. Atmospheric pressure chemical ionization (APCI) is suitable for the analysis of saturated hydrocarbons and is the subject of current research. Still, although APCI is a "soft ionization" technique, fragmentation is typically inevitable. Moreover, it is usually applied for liquid samples, while an application for online gas-phase monitoring is widely unexplored. Here, we present an automated APCI-MS method for an online gas-phase analysis of volatile and semi-volatile n-alkanes. Mass spectra for n-heptane and n-decane reveal [M-H]+, [M-3H]+ and [M-3H+H2O]+ as abundant ions. While [M-H]+ and [M-3H]+ show an excessive fragmentation pattern to smaller CnH2n+1+ and CnH2n-1+ cations, [M-3H+H2O]+ is the only relevant signal within the CnH2n+1O+ ion group, i.e., no chain cleavage is observed. This makes [M-3H+H2O]+ an analyte-specific ion that is suitable for the quantification of n-alkane mixtures. A calibration confirms the linearity of C7 and C10 signals up to concentrations of ~1000-1500 ppm. Moreover, validated concentration profiles are measured for a binary C7/C10 mixture and a five-alkane C7/C10/C12/C14/C20 mixture. Compared to the 40-min sampling interval of the reference gas chromatograph, MS sampling is performed within 5 min and allows dynamic changes to be monitored.

Characterization of Sulfur-Rich Microbial Organic Matter in Jurassic Carbonates Using Laser-Assisted Mass Spectrometry

Laser desorption-ionization mass spectrometry (MS) shows great potential for in situ molecular analysis of planetary surfaces and microanalysis of space-returned samples or (micro)fossils. Coupled with pyrolysis gas chromatography-mass spectrometry (Py-GC-MS) in ESA's ExoMars project, this technique could help assess further the origin of sulfur-bearing organic matter (OM) recently detected on Mars. To unravel this potential, we analyzed sulfurized microbial OM from ca. 150 million year-old carbonates with laser desorption-ionization mass spectrometry (single- and two-step: LDI-MS and L2MS), in comparison with time-of-flight secondary-ion mass spectrometry (ToF-SIMS), gas chromatography-mass spectrometry (GC-MS), and Py-GC-MS. We show that LDI-MS and L2MS readily detect sulfur-bearing moieties such as (alkyl)thiophenes and (alkyl)benzothiophenes. The mineral matrix, however, made the identification of sulfur-bearing molecules challenging in our L2MS experiment. The dominance of small aromatic hydrocarbons (≤14 carbons) in the LDI-MS and L2MS of the extracted soluble and insoluble OM and of the bulk rock is consistent with the low thermal maturity of the sediment and contrasts with the predominance of larger polycyclic aromatic structures commonly observed in meteorites with these techniques. We detected inorganic ions, in particular VO+, in demineralized OM that likely originate from geoporphyrins, which derive from chlorophylls during sediment diagenesis. Finally, insoluble OM yielded distinct compositions compared with extracted soluble OM, with a greater abundance of ions of mass-to-charge ratio (m/z) over 175 and additional N-moieties. This highlights the potential of laser-assisted MS to decipher the composition of macromolecular OM, in particular to investigate the preservation of biomacromolecules in microfossils. Studies comparing diverse biogenic and abiogenic OM are needed to further assess the use of this technique to search for biosignatures.

Novel MCP-Windowed EUV Light Source and Its Mass Spectrometric Application for Detecting Chlorinated Methanes

Various vacuum ultraviolet (VUV) lamps are simple and convenient VUV light sources for mass spectrometry and other research fields. However, the strong absorption of high-energy photons by window materials limits the application of an extreme ultraviolet (EUV) light. In this study, a novel high-flux EUV light source is developed using a microchannel plate (MCP) window to transmit 73.6 nm (16.9 eV) EUV light generated via the radio frequency (RF) inductive discharge of neon. The MCP used is a 0.5 mm thick glass plate with a regular array of microtubes (12 μm i.d.). The photon fluxes of the EUV light source with the MCP window (12 mm i.d.) and an aperture (1.8 mm i.d.) are ∼1.31 × 1014 and ∼9.80 × 1012 photons s-1, respectively, while their corresponding leakage flow rates of the discharge gas are 0.062 and 0.046 cm3 atom s-1, according to the contrast experiments. The transmission efficiency of the MCP to the EUV light is 30.2%, with a 1.2% deviation. An EUV photoionization time-of-flight mass spectrometer (EUV-PI-TOFMS) is built to validate the practicality of the MCP-windowed EUV light source further. The detection sensitivities in 30 s measurements for methyl chloride (CH3Cl), methylene chloride (CH2Cl2), trichloromethane (CHCl3), and carbon tetrachloride (CCl4) in synthetic air are 4366, 4120, 5854, and 4095 counts ppbv-1, respectively. The corresponding 3σ limits of detection (LODs) are 42, 34, 24, and 15 pptv. This study develops a new feasible method for efficiently utilizing high-energy EUV light, with many application prospects in scientific research.

Giving the Green Light to Photochemical Uncaging of Large Biomolecules in High Vacuum

The isolation of biomolecules in a high vacuum enables experiments on fragile species in the absence of a perturbing environment. Since many molecular properties are influenced by local electric fields, here we seek to gain control over the number of charges on a biopolymer by photochemical uncaging. We present the design, modeling, and synthesis of photoactive molecular tags, their labeling to peptides and proteins as well as their photochemical validation in solution and in the gas phase. The tailored tags can be selectively cleaved off at a well-defined time and without the need for any external charge-transferring agents. The energy of a single or two green photons can already trigger the process, and it is soft enough to ensure the integrity of the released biomolecular cargo. We exploit differences in the cleavage pathways in solution and in vacuum and observe a surprising robustness in upscaling the approach from a model system to genuine proteins. The interaction wavelength of 532 nm is compatible with various biomolecular entities, such as oligonucleotides or oligosaccharides.

Applications of mass spectrometry in cosmetic analysis: An overview

Mass spectrometry (MS) is a crucial tool in cosmetic analysis. It is widely used for ingredient screening, quality control, risk monitoring, authenticity verification, and efficacy evaluation. However, due to the diversity of cosmetic products and the rapid development of MS-based analytical methods, the relevant literature needs a more systematic collation of information on this subject to unravel the true potential of MS in cosmetic analysis. Herein, an overview of the role of MS in cosmetic analysis over the past two decades is presented. The currently used sample preparation methods, ionization techniques, and types of mass analyzers are demonstrated in detail. In addition, a brief perspective on the future development of MS for cosmetic analysis is provided.

Manipulation of Ion Conversion in Dichloromethane-Enhanced Vacuum Ultraviolet Photoionization Mass Spectrometry of Oxygenated Volatile Organic Compounds

The ion conversion processes in CH2Cl2-enhanced vacuum ultraviolet photoionization of oxygenated volatile organic compounds (OVOCs) have been systematically studied by regulating the pressure, humidity, and reaction time in the ionization source of a time-of-flight mass spectrometer. As the ionization source pressure increased from 100 to 1100 Pa, the main characteristic ions changed from CH2Cl+ to CH2Cl+(H2O), CH2OH+, and C2H4OH+ and then to the hydrated hydronium ions H3O+(H2O)n (n = 1, 2, 3). The total ion current (TIC) almost remained unchanged even if the humidity increased from 44 to 3120 ppmv, indicating interconversion between ions through ion-molecule reactions. The intensity of protonated methanol/ethanol (sample S) ion was almost linearly correlated with the intensity of H3O+(H2O)n, which pointed to the proton transfer reaction (PTR) mechanism. The reaction time was regulated by the electric field strength in the ionization region. The intensity variation trends of different ions with the reaction time indicated that a series of step-by-step ion-molecule reactions occurred in the ionization source, i.e., the primary ion CH2Cl+ reacted with H2O and converted to the intermediate product ions CH2OH+ and C2H4OH+, which then further reacted with H2O and led to the production of H3O+, and finally, the protonated sample ion SH+ was obtained through PTR with H3O+, as the ion-molecule reactions progressed. This study provides valuable insights into understanding the formation mechanism of some unexpected intermediate product ions and hydrated hydronium ions in dopant-enhanced VUV photoionization and also helps to optimize experimental conditions to enhance the sensitivity of OVOCs.

A Simple High-Flux Switchable VUV Lamp Based on an Electrodeless Fluorescent Lamp for SPI/PAI Mass Spectrometry

Single-photon ionization (SPI) is a unique soft ionization technique for organic analysis. A convenient high-flux vacuum ultraviolet (VUV) light source is a key precondition for wide application of SPI techniques. In this study, we present a novel VUV lamp by simply modifying an ordinary electrodeless fluorescent lamp. By replacing the glass bulb with a stainless steel bulb and introducing 5% Kr/He (v/v) as the excitation gas, an excellent VUV photon flux over 4.0 × 1014 photons s-1 was obtained. Due to its rapid glow characteristics, the VUV lamp can be switched on and off instantly as required by detection, ensuring the stability and service life of the lamp. To demonstrate the performance of the new lamp, the switchable VUV lamp was coupled with an SPI-mass spectrometer, which could be changed to photoinduced associative ionization (PAI) mode by doping gaseous CH2Cl2 to initiate an associative ionization reaction. Two types of volatile organic compounds sensitive to SPI and PAI, typically benzene series and oxygenated organics, respectively, were selected as samples. The instrument exhibited a high detection sensitivity for the tested compounds. With a measurement time of 11 s, the 3σ limits of detection ranged from 0.33 to 0.75 pptv in SPI mode and from 0.03 to 0.12 pptv in PAI mode. This study provides an extremely simple method to assemble a VUV lamp with many merits, e.g., portability, robustness, durability, low cost, and high flux. The VUV lamp may contribute to the development of SPI-related highly sensitive detection technologies.

Microlensed fiber allows subcellular imaging by laser-based mass spectrometry

Mass spectrometry imaging (MSI) enables the chemical mapping of molecules and elements in a label-free, high-throughput manner. Because this approach can be accomplished rapidly, it also enables chemical changes to be monitored. Here, we describe a protocol for MSI with subcellular spatial resolution. This is achieved by using a microlensed fiber, which is made by grinding an optical fiber. It is a universal and economic technique that can be adapted to most laser-based mass spectrometry methods. In this protocol, the output of laser radiation from the microlensed fiber causes laser ablation of the sample, and the resulting plume is mass spectrometrically analyzed. The microlensed fiber can be used with matrix-assisted laser desorption ionization, laser desorption ionization, laser ablation electrospray desorption ionization and laser ablation inductively coupled plasma, in each case to achieve submicroscale imaging of single cells and biological tissues. This report provides a detailed introduction of the microlensed fiber design and working principles, sample preparation, microlensed fiber ion source setup and multiple MSI platforms with different kinds of mass spectrometers. A researcher with a little background (such as a trained graduate student) is able to complete all the steps for the experimental setup in ~2 h, including fiber test, laser coupling and ion source modification. The imaging time spent mainly depends on the size of the imaging area. It is suggested that most existing laser-based MSI platforms, especially atmospheric pressure applications, can achieve breakthroughs in spatial resolution by introducing a microlensed fiber module.

Brown Coal and Logwood Combustion in a Modern Heating Appliance: The Impact of Combustion Quality and Fuel on Organic Aerosol Composition

Residential heating with solid fuels is one of the major drivers for poor air quality in Central and Eastern Europe, and coal is still one of the major fuels in countries, such as Poland, the Czech Republic, and Hungary. In this work, emissions from a single-room heater fueled with brown coal briquettes (BCBs) and spruce logs (SLs) were analyzed for signatures of inorganic as well as semivolatile aromatic and low-volatile organic constituents. High variations in organic carbon (OC) emissions of BCB emissions, ranging from 5 to 22 mg MJ^-1, were associated to variations in carbon monoxide (CO) emissions, ranging from 900 to 1900 mg MJ^-1. Residential BCB combustion turned out to be an equally important source of levoglucosan, an established biomass burning marker, as spruce logwood combustion, but showed distinct higher ratios to manosan and galactosan. Signatures of polycyclic aromatic hydrocarbons emitted by BCB combustion exhibited defunctionalization and desubstitution with increasing combustion quality. Lastly, the concept of island and archipelago structural motifs adapted from petroleomics is used to describe the fraction low-volatile organic compounds in particulate emissions, where a transition from archipelago to island motifs in relation with decreasing CO emissions was observed in BCB emissions, while emissions from SL combustion exhibited the island motif.

Ionization of Dichloromethane by a Vacuum Ultraviolet Krypton Lamp: Competition Between Photoinduced Ion-Pair and Photodissociation-Assisted Photoionization

The photodissociation and photoionization behaviors of haloalkanes in the VUV regime are important to fully understand the mechanism of ozone depletion in the stratosphere. The ionization of dichloromethane (CH₂Cl₂) under the irradiation of 10.0 and 10.6 eV light was investigated. CH₂Cl⁺ was observed at 10 Pa, while both CH₂Cl⁺ and CHCl₂⁺ were observed at higher pressure. The production efficiency of CH₂Cl⁺ decreased with the increasing number density of CH₂Cl₂, while that of CHCl₂⁺ increased. A kinetic model was successfully derived to quantitatively describe the variation trends of CH₂Cl⁺ and CHCl₂⁺, in which the competition between photoinduced ion-pair and photodissociation-assisted photoionization (PD-PI) were included. The ion-pair channel was quenched efficiently at higher pressure or concentration, which reduced its contribution. Our study proposed new insights into the complicated photoexcitation behaviors of CH₂Cl₂ in the VUV regime and revealed the important role of photodissociation in photoionization at low photon flux.

Measurement and summary of photoionization data for biomass-derived compounds

RATIONALE

Biomass is a potential feedstock for making liquid fuels and valuable chemicals. Quantitative analysis of biomass conversion in real time by photoionization mass spectrometry (PIMS) is an important way to understand the reaction process. However, the lack of photoionization data for biomass-derived compounds limits the research using PIMS.

METHODS

Measurements of photoionization data were performed with synchrotron vacuum ultraviolet PIMS. Toluene and methanol were used as calibrated references and solvents in this experiment since their photoionization cross-sections (PICS) are well documented in the literature.

RESULTS

The ionization energies (IEs) of 23 biomass-derived compounds were measured. Among them, the PICSs of 14 compounds were calibrated and presented. Besides, the IEs of 95 other biomass-derived compounds and their typical fragment ions were also summarized.

CONCLUSIONS

A photoionization database related to IEs and PICSs of biomass-derived compounds (m/z < 200) is established. PICSs of most biomass-derived compounds have low values at the most frequently used photoionization energy of 10.5 eV. Lignin-derived compounds have lower IEs than carbohydrate-derived compounds.

Visualizing the distribution of curcumin in the root of Curcuma longa via VUV-postionization mass spectrometric imaging

Curcumin is a dietary spice and coloring agent widely used in food and herbal medicine. Herein, we visualized the distribution of curcumin in fresh Curcuma longa (turmeric) root sections using the state-of-the-art vacuum-ultraviolet (VUV, 118 nm) single photon-postionization mass spectrometric imaging method. Compared with other mass spectrometric imaging methods, the proposed method does not require any sample pre-treatment. The proposed approach could be more conducive to in situ detection of small molecules. The mass spectroscopic imaging (MSI) images of curcumin sections with a lateral resolution of 100 μm indicated that the concentrations of curcumin decreased from the phloem to the xylem of the root. We also show MS imaging of curcumin in the turmeric root at different maturity periods, revealing the transformation of this endogenous species. The result of quantitative analysis indicates that the total curcumin content of the mature turmeric root is estimated to be 3.43%, which is consistent with the previous report that the content of curcumin in the turmeric root is estimated between 3% and 5%. The report indicated that the proposed method of VUV single photon postionization MSI can be used to explore the metabolic process of plants, which is critical for herbal farming, harvest, and its ingredient extraction.

Recent progress in mass spectrometry for single-cell metabolomics

Metabolites are the end products of cellular vital activities and can reflect the state of cellular to a certain extent. Rapid change of metabolites and the low abundance of signature metabolites cause difficulties in single-cell detection, which is a great challenge in single-cell metabolomics analysis. Mass spectrometry (MS) is a powerful tool that uniquely suited to detect intracellular small-molecule metabolites and has shown good application in single-cell metabolite analysis. In this mini-review, we describe three types of emerging technologies for MS-based single-cell metabolic analysis in recent years, including nano-ESI-MS based single-cell metabolomics analysis, high-throughput analysis via flow cytometry, and cellular metabolic imaging analysis. These techniques provide a large amount of single-cell metabolic data, allowing the potential of MS in single-cell metabolic analysis is gradually being explored and is of great importance in disease and life science research.

The Effect of Human Occupancy on Indoor Air Quality through Real-Time Measurements of Key Pollutants

The primarily emitted compounds by human presence, e.g., skin and volatile organic compounds (VOCs) in breath, can react with typical indoor air oxidants, ozone (O₃), and hydroxyl radicals (OH), leading to secondary organic compounds. Nevertheless, our understanding about the formation processes of the compounds through reactions of indoor air oxidants with primary emitted pollutants is still incomplete. In this study we performed real-time measurements of nitrous acid (HONO), nitrogen oxides (NO_x = NO + NO₂), O₃, and VOCs to investigate the contribution of human presence and human activity, e.g., mopping the floor, to secondary organic compounds. During human occupancy a significant increase was observed of 1-butene, isoprene, and d-limonene exhaled by the four adults in the room and an increase of methyl vinyl ketone/methacrolein, methylglyoxal, and 3-methylfuran, formed as secondary compounds through reactions of OH radicals with isoprene. Intriguingly, the level of some compounds (e.g., m/z 126, 6-methyl-5-hepten-2-one, m/z 152, dihydrocarvone, and m/z 194, geranyl acetone) formed through reactions of O₃ with the primary compounds was higher in the presence of four adults than during the period of mopping the floor with commercial detergent. These results indicate that human presence can additionally degrade the indoor air quality.

Single‐Photon‐Induced Post‐Ionization to Boost Ion Yields in MALDI Mass Spectrometry Imaging**

Matrix‐assisted laser desorption/ionization mass spectrometry imaging (MALDI‐MSI) is a rapidly growing method in the life sciences. However, for many analyte classes, its sensitivity is limited due to poor ionization efficiencies. To mitigate this problem, we here introduce a novel post‐ionization scheme based on single‐photon induced chemical ionization using pulsed RF‐Kr lamps. The fine‐vacuum conditions of a dual ion‐funnel ion source effectively thermalize the evolving MALDI plume and enable ample gas‐phase reactions. Injected chemical dopants crucially support fragment‐less ionization to [M+H]⁺/[M−H]⁻ species. Based on this interplay, numerous glycerophospho‐, sphingo‐, and further lipids, registered from mammalian tissue sections, were boosted by up to three orders of magnitude, similar to results obtained with laser‐based post‐ionization (MALDI‐2). Experiments with deuterated matrix and dopant, however, indicated complex chemical ionization pathways different from MALDI‐2.

Probing combustion and catalysis intermediates by synchrotron vacuum ultraviolet photoionization molecular-beam mass spectrometry: recent progress and future opportunities

Soft photoionization molecular-beam mass spectrometry (PI MBMS) with synchrotron vacuum ultraviolet light (SVUV) has has a significant development and broad applications in recent decades. Particularly, the tunability of SVUV enables...

Simultaneous on-line vacuum single- and multi-photon ionization on an orthogonal acceleration time-of-flight mass spectrometer platform

New instrumental development for robust process monitoring with two soft ionization methods working in parallel.

Nanoscale Three-Dimensional Imaging of Drug Distributions in Single Cells via Laser Desorption Post-Ionization Mass Spectrometry

Exploring the three-dimensional (3D) drug distribution within a single cell at nanoscale resolution with mass spectrometry imaging (MSI) techniques is crucial in cellular biology, yet it remains a great challenge due to limited lateral resolution, detection sensitivities, and reconstruction problems. Herein, a microlensed fiber laser desorption post-ionization time-of-flight mass spectrometer (MLF-LDPI-TOFMS) was developed for the 3D imaging of two anticancer drugs within single cells at a 500 × 500 × 500 nm³ voxel resolution. Nanoscale desorption was obtained with a microlensed fiber (MLF), and a 157 nm post-ionization laser was introduced to enhance the ionization yield. Furthermore, a new type of alignment method for 3D reconstruction was developed on the basis of our embedded uniform circular polystyrene microspheres (PMs). Our findings demonstrate that this 3D imaging technique has the potential to provide information about the 3D distributions of specific molecules at the nanoscale level.

Chemistry of Functionalized Reactive Organic Intermediates in the Earth's Atmosphere: Impact, Challenges, and Progress

The gas-phase oxidation of organic compounds is an important chemical process in the Earth's atmosphere. It governs oxidant levels and controls the production of key secondary pollutants, and hence has major implications for air quality and climate. Organic oxidation is largely controlled by the chemistry of a few reactive intermediates, namely, alkyl (R) radicals, alkoxy (RO) radicals, peroxy (RO₂) radicals, and carbonyl oxides (R₁R₂COO), which may undergo a number of unimolecular and bimolecular reactions. Our understanding of these intermediates, and the reaction pathways available to them, is based largely on studies of unfunctionalized intermediates, formed in the first steps of hydrocarbon oxidation. However, it has become increasingly clear that intermediates with functional groups, which are generally formed later in the oxidation process, can exhibit fundamentally different reactivity than unfunctionalized ones. In this Perspective, we explore the unique chemistry available to functionalized organic intermediates in the Earth's atmosphere. After a brief review of the canonical chemistry available to unfunctionalized intermediates, we discuss how the addition of functional groups can introduce new reactions, either by changing the energetics or kinetics of a given reaction or by opening up new chemical pathways. We then provide examples of atmospheric reaction classes that are available only to functionalized intermediates. Some of these, such as unimolecular H-shift reactions of RO₂ radicals, have been elucidated only relatively recently, and can have important impacts on atmospheric chemistry (e.g., on radical cycling or organic aerosol formation); it seems likely that other, as-yet undiscovered reactions of (multi)functional intermediates may also exist. We discuss the challenges associated with the study of the chemistry of such intermediates and review novel experimental and theoretical approaches that have recently provided (or hold promise for providing) new insights into their atmospheric chemistry. The continued use and development of such techniques and the close collaboration between experimentalists and theoreticians are necessary for a complete, detailed understanding of the chemistry of functionalized intermediates and their impact on major atmospheric chemical processes.

Femtosecond Laser Desorption Postionization MS vs ToF-SIMS Imaging for Uncovering Biomarkers Buried in Geological Samples

The study of lipid molecular fossils by traditional biomarker analysis requires bulk sample crushing, followed by solvent extraction, and then the analysis of the extract by gas chromatography-mass spectrometry (GC-MS). This traditional analysis mixes all organic compounds in the sample regardless of their origins, with a loss of information on the spatial distribution of organic molecules within the sample. These shortcomings can be overcome using the chemical mapping of intact samples. Spectroscopic techniques such as UV fluorescence or Raman spectroscopy, laser ablation inductively coupled plasma mass spectrometry, and time-of-flight secondary ion mass spectrometry (ToF-SIMS) are among those elemental and molecular mapping techniques. This study employed femtosecond (fs) laser ablation combined with single-photon ionization, a method called fs-laser desorption postionization mass spectrometry (fs-LDPI-MS). A pulsed ∼75 fs, 800 nm laser was used to ablate the geological sample, which was then photoionized after a few microseconds by a pulsed 7.9 eV vacuum ultraviolet laser. An organic carbon-rich geological sample was used for this study to map hydrocarbon biomarkers in sediments that were previously studied by GC-MS. The petrography of this sample was examined by optical and fluorescence microscopy. It is demonstrated here that fs-LDPI-MS combined with petrography for multimodal imaging can expose buried compounds within the sample via in situ layer removal. When used in conjunction with traditional organic geochemical analysis, this method has the potential to determine the spatial distribution of organic biomarkers in geological material. Finally, fs-LDPI-MS imaging data are compared with ToF-SIMS imaging that is commonly used for such studies.

LASER DESORPTION/ABLATION POSTIONIZATION MASS SPECTROMETRY: RECENT PROGRESS IN BIOANALYTICAL APPLICATIONS

Lasers have long been used in the field of mass spectrometric analysis for characterization of condensed matter. However, emission of neutrals upon laser irradiation surpasses the number of ions. Typically, only one in about one million analytes ejected by laser desorption/ablation is ionized, which has fueled the quest for postionization methods enabling ionization of desorbed neutrals to enhance mass spectrometric detection schemes. The development of postionization techniques can be an endeavor that integrates multiple disciplines involving photon energy transfer, electrochemistry, gas discharge, etc. The combination of lasers of different parameters and diverse ion sources has made laser desorption/ablation postionization (LD/API) a growing and lively research community, including two-step laser mass spectrometry, laser ablation atmospheric pressure photoionization mass spectrometry, and those coupled to ambient mass spectrometry. These hyphenated techniques have shown potentials in bioanalytical applications, with major inroads to be made in simultaneous location and quantification of pharmaceuticals, toxins, and metabolites in complex biomatrixes. This review is intended to provide a timely comprehensive view of the broadening bioanalytical applications of disparate LD/API techniques. We also have attempted to discuss these applications according to the classifications based on the postionization methods and to encapsulate the latest achievements in the field of LD/API by highlighting some of the very best reports in the 21st century. © 2020 John Wiley & Sons Ltd.

Exploring 20 eV electron impact ionization in gas chromatography-tandem mass spectrometry for the determination of estrogenic compounds

In electron ionization mass spectrometry (MS), the generation of characteristic fragmentation patterns allows reliable and sensitive identification of compounds. However, loss or a less intense signal of the molecular ion (or more diagnostic ions) can often be observed, which can be detrimental for identification and/or sensitivity, even when MS/MS approaches are applied for quantification. The benefits of applying lower ionization energy (i.e., 20 eV compared to 70 eV) using a gas chromatography (GC) - tandem MS (MS/MS) instrument were investigated in the detection of three estrogenic compounds, namely estrone (E1), 17β-estradiol (E2), and 17α-ethynylestradiol (EE2), emerging aquatic pollutants included in the European Commission Watch List. As expected, the relative intensity of molecular ions (M^+.) or high-mass fragments closely related (M^+.-CH₃) increased significantly at 20 eV compared to 70 eV (from 4.6 % to 35.0 % for EE2, from 22.5 % to 87.3 % for E2, and from 76 % to 100 % for E1). This change in the spectrum profile led to an overall increase in the sensitivity of the compounds when detected using the multiple reaction monitoring mode. These results were compared with the instrumental limit of quantification obtained in liquid chromatography - MS/MS showing a limit of quantification of about 100-folds lower for GC-MS/MS and a completely neglectable matrix effect, thus posing the base for the development of a miniaturized sample preparation method (with an overall lower concentration factor) to achieve the challenging low limits of detection required by the EU regulation for estrogenic compounds.

Vacuum Laser Photoionization inside the C-trap of an Orbitrap Mass Spectrometer: Resonance-Enhanced Multiphoton Ionization High-Resolution Mass Spectrometry

State-of-the-art mass spectrometry with ultraviolet (UV) photoionization is mostly limited to time-of-flight (ToF) mass spectrometers with 1000-10 000 m/Δm mass resolution. However, higher resolution and higher spectral dynamic range mass spectrometry may be indispensable in complex mixture characterization. Here, we present the concept, implementation, and initial evaluation of a compact ultrahigh-resolution mass spectrometer with gas-phase laser ionization. The concept is based on direct laser photoionization in the ion accumulation and ejection trap (C-trap) of an Orbitrap mass spectrometer. Resonance-enhanced multiphoton ionization (REMPI) using 266 nm UV pulses from a frequency-quadrupled Nd:YAG laser was applied for selective and efficient ionization of monocyclic and polycyclic aromatic hydrocarbons. The system is equipped with a gas inlet for volatile compounds and a heated gas chromatography coupling. The former can be employed for rapid system m/z-calibration and performance evaluation, whereas the latter enables analysis of semivolatile and higher-molecular-weight compounds. The capability to evaluate complex mixtures is demonstrated for selected petrochemical materials. In these experiments, several hundred to over a thousand compounds could be attributed with a root-mean-square mass error generally below 1 ppm and a mass resolution of over 140 000 at 200 m/z. Isobaric interferences could be resolved, and narrow mass splits, such as 3.4 mDa (SH₄/C₃), are determined. Single laser shots provided limits of detection in the 20-ppb range for p-xylene and 1,2,4-trimethylbenzene, similar to compact vacuum REMPI-ToF systems.

Hyper-fast gas chromatography and single-photon ionisation time-of-flight mass spectrometry with integrated electrical modulator-based sampling for headspace and online VOC analyses

We developed a novel fast gas chromatography (fastGC) instrument with integrated sampling of volatile organic compounds (VOCs) and detection by single-photon ionisation (SPI) time-of-flight mass spectrometry (TOFMS). A consumable-free electrical modulator rapidly cools down to -55 °C to trap VOCs and inject them on a short chromatographic column by prompt heating to 300 °C, followed by carrier gas exchange from air to helium. Due to the low thermal mass and optical heating, the fastGC is operated within total runtimes including cooling for 30 s and 15 s, referring to hyper-fast GC, and at a constantly increasing temperature ramp from 30 °C to 280 °C. The application of soft SPI-TOFMS allows the detection of co-eluting VOCs of different molecular compositions, which cannot be resolved by conventional GC (cGC) with electron ionisation (EI). Among other analytical figures of merit, we achieved limits of detection for toluene and p-xylene of 2 ppb and 0.5 ppb, respectively, at a signal-to-noise ratio of 3 and a linear response over a range of more than five orders of magnitude. Furthermore, we demonstrate the performance of the instrument on samples from the fields of environmental research and food science by headspace analysis of roasted coffee beans and needles from coniferous trees as well as by quasi-real-time analysis of biomass burning emissions and coffee roast gas.

Marine volatile organic compounds and their impacts on marine aerosol-A review

Volatile organic compounds (VOCs) play a vital role in the global carbon budget and in the regional formation of ozone in the troposphere, and are emitted from both natural and anthropogenic activities. They can also serve as a source of secondary organic aerosol (SOA). Field and model studies showed evidences of a strong marine biogenic influence on marine aerosols. Although knowledge of terrestrial VOC emissions and SOA formation mechanisms has been advanced considerably over the last decades, processes constraining marine VOC emissions and marine SOA formation remain poorly understood. Seawater contains an extremely complex, diverse, and largely unidentified mixture of VOCs. Despite the fact that the ocean covers 70% of the Earth's surface, the role of the ocean in the global budget of VOCs is still unclear. The distribution and emission of sea surface VOCs exhibit considerable spatial-temporal variation, with higher concentrations often, but not always, correlated with biological activities. VOCs in surface seawater have been measured in various geographic regions, however, knowledge of the distribution of marine VOCs and the role of the oceans in the global atmospheric chemistry is still insufficient due to the paucity of measurements. This study reviews marine VOCs in terms of current analytical methods, global marine VOCs measurements, their effects on SOA, and future needs for understanding the role of marine VOCs in the chemistry of the atmosphere.

Unraveling the Complex Olefin Isomer Mixture Using Two-Dimensional Gas Chromatography-Photoionization-Time of Flight Mass Spectrometry

Commercial dodecenes are a complex chemical mixture with a majority of C₁₂ olefins and minority of C_8-18 olefins. Structurally, dodecene products may consist of straight-chain alkenes, branched alkenes, as well as cyclic hydrocarbons. Due to the difference of feeds and catalysts used in the oligomerization reaction, the composition of the dodecenes is complex and their properties are very different. Knowing the complex composition of dodecenes can help tune the production process and select the appropriate products according to their end use. To reveal the complex profile of dodecenes, an analytical method using two-dimensional gas chromatography (GC×GC) coupled photoionization (PI) - time of flight mass spectrometry (TOFMS) was developed in this study. A conventional (nonpolar × polar) column combination (non-polar column as 1^st dimension and mid-polar column as 2^nd dimension) was selected. The analytical condition of GC was optimized using fractional factorial experimental design (DoE). Olefin congener grouping by carbon chain length and double bond equivalent (DBE) was achieved based on the detection of molecular ions by PI-TOFMS. Grouping of dodecenes by linear, mono-branched, di- and tri-branched subgroups was achieved based on branching index (BI) under the assumption of no retention time (RT) overlap among subgroups. Certain dodecene isomers were identified by retention index (RI) and further confirmed by PI mass spectra. The information altogether provided a multimodal characterization possibility to be used with statistical tools. Principal component analysis (PCA) and hierarchical clustering analysis (HCA) of seventeen dodecene samples explained the composition variance between catalysts solid phosphoric acid and zeolite, as well as between feeds with C₄ and without C₄.

Impact of metals on (star)dust chemistry: a laboratory astrophysics approach

Laboratory experiments are essential in exploring the mechanisms involved in stardust formation. One key question is how a metal is incorporated into dust for an environment rich in elements involved in stardust formation (C, H, O, Si). To address experimentally this question we have used a radiofrequency cold plasma reactor in which cyclic organosilicon dust formation is observed. Metallic (silver) atoms were injected in the plasma during the dust nucleation phase to study their incorporation in the dust. The experiments show formation of silver nanoparticles (~15 nm) under conditions in which organosilicon dust of size 200 nm or less is grown. The presence of AgSiO bonds, revealed by infrared spectroscopy, suggests the presence of junctions between the metallic nanoparticles and the organosilicon dust. Even after annealing we could not conclude on the formation of silver silicates, emphasizing that most of silver is included in the metallic nanoparticles. The molecular analysis performed by laser mass spectrometry exhibits a complex chemistry leading to a variety of molecules including large hydrocarbons and organometallic species. In order to gain insights into the involved chemical molecular pathways, the reactivity of silver atoms/ions with acetylene was studied in a laser vaporization source. Key organometallic species, Ag n C2H m (n=1-3; m=0-2), were identified and their structures and energetic data computed using density functional theory. This allows us to propose that molecular Ag-C seeds promote the formation of Ag clusters but also catalyze hydrocarbon growth. Throughout the article, we show how the developed methodology can be used to characterize the incorporation of metal atoms both in the molecular and dust phases. The presence of silver species in the plasma was motivated by objectives finding their application in other research fields than astrochemistry. Still, the reported methodology is a demonstration laying down the ground for future studies on metals of astrophysical interest such as iron.

Studying Interfacial Dark Reactions of Glyoxal and Hydrogen Peroxide Using Vacuum Ultraviolet Single Photon Ionization Mass Spectrometry

Aqueous secondary organic aerosol (aqSOA) formation from volatile and semivolatile organic compounds at the air–liquid interface is considered as an important source of fine particles in the atmosphere. However, due to the lack of in situ detecting techniques, the detailed interfacial reaction mechanism and dynamics still remain uncertain. In this study, synchrotron-based vacuum ultraviolet single-photon ionization mass spectrometry (VUV SPI-MS) was coupled with the System for Analysis at the Liquid Vacuum Interface (SALVI) to investigate glyoxal dark oxidation products at the aqueous surface. Mass spectral analysis and determination of appearance energies (AEs) suggest that the main products of glyoxal dark interfacial aging are carboxylic acid related oligomers. Furthermore, the VUV SPI-MS results were compared and validated against those of in situ liquid time-of-flight secondary ion mass spectrometry (ToF-SIMS). The reaction mechanisms of the dark glyoxal interfacial oxidation, obtained using two different approaches, indicate that differences in ionization and instrument operation principles could contribute to their abilities to detect different oligomers. Therefore, the mechanistic differences revealed between the VUV SPI-MS and ToF-SIMS indicate that more in situ and real-time techniques are needed to investigate the contribution of the air–liquid interfacial reactions leading to aqSOA formation.

Nonuniform Electric Field-Enhanced In-Source Declustering in High-Pressure Photoionization/Photoionization-Induced Chemical Ionization Mass Spectrometry for Operando Catalytic Reaction Monitoring

Photoionization mass spectrometry (PI-MS) is a powerful and highly sensitive analytical technique for online monitoring of volatile organic compounds (VOCs). However, due to the large difference of PI cross sections for different compounds and the limitation of photon energy, the ability of lamp-based PI-MS for detection of compounds with low PI cross sections and high ionization energies (IEs) is insufficient. Although the ion production rate can be improved by elevating the ion source pressure, the problem of generating plenty of cluster ions, such as [MH]⁺·(H₂O)_n (n = 1 and 2) and [M₂]⁺, needs be solved. In this work, we developed a new nonuniform electric field high-pressure photoionization/photoionization-induced chemical ionization (NEF-HPPI/PICI) source with the abilities of both HPPI and PICI, which was accomplished through ion-molecule reactions with high-intensity H₃O⁺ reactant ions generated by photoelectron ionization (PEI) of water molecules. By establishing a nonuniform electric field in a three-zone ionization region to enhance in-source declustering and using 99.999% helium as the carrier gas, not only the formation of cluster ions was significantly diminished, but the ion transmission efficiency was also improved. Consequently, the main characteristic ion for each analyte both in HPPI and PICI occupied more than 80%, especially [HCOOH·H]⁺ with a yield ratio of 99.2% for formic acid. The analytical capacity of this system was demonstrated by operando monitoring the hydrocarbons and oxygenated VOC products during the methanol-to-olefins and methane conversion catalytic reaction processes, exhibiting wide potential applications in process monitoring, reaction mechanism research, and online quality control.

Real time analysis of trace volatile organic compounds in ambient air: a comparison between membrane inlet single photon ionization mass spectrometry and proton transfer reaction mass spectrometry

Real-time monitoring of volatile organic compounds (VOCs) is critical for a better understanding of chemical processes in ambient air or making minute-by-minute decisions in emergency situations. Proton transfer reaction mass spectrometry (PTR-MS) is nowadays the most commonly used technique for real-time monitoring of VOCs while membrane single photon ionization mass spectrometry (MI-SPI-MS) is a promising MS technique for online detection of trace VOCs. Here, to evaluate the potential of MI-SPI-MS as a complementary tool to PTR-MS, a comprehensive comparison has been performed between MI-SPI-MS and PTR-MS. By using two sets of standard gas mixtures TO15 and PAMS, SPI-MS shows advantages in the detection of ≥C5 alkanes, aromatics and halogens; especially for aromatics, the LODs can reach the ppt level. PTR-MS has performed better in the detection of alkenes, ketones and aldehydes. For outdoor measurements, a number of VOCs have been detected while using MI-SPI-MS and PTR-MS in parallel. Consistent temporal variations have been observed for toluene, C8-aromatics and C9-aromatics by the two instruments, with a more sensitive response from the MI-SPI-MS. Thus by measuring both standard gas mixture and complex ambient air samples, we have successfully demonstrated that MI-SPI-MS will be a helpful tool to provide important complementary information on aromatics and alkanes in air, and proper application of MI-SPI-MS will benefit the real-time monitoring of trace VOCs in relative fields.

Low-Pressure Photoionization in a Dual-Ion Funnel Injector Coupled to an Orbitrap Mass Spectrometer for Direct Analysis of Human Breath and Head-Space Sampled Coffee Roasts

Low-pressure photoionization (LPPI) is a versatile tool for the mass spectrometric detection of (semi-)volatile organic compounds, (s)VOC. Here, a dual-ion funnel MALDI/ESI ion injector was equipped with a direct-inlet LPPI module. A radio-frequency (RF) drive enabled the implementation of three Kr discharge lamps in a novel design optimized for efficient photoionization and undisturbed ion trajectories. Supported by expansion and collisional cooling and, optionally, dopant vapor, primarily intact radical ions and protonated molecules were generated. Molecular identification was supported by the high-resolving power of an Orbitrap mass analyzer. In our proof-of-concept study, exhaled human breath and head-space sampled coffee grounds were characterized with this high-throughput technique. From breath, a few hundred and for the coffee roasts more than thousand distinct (s)VOC features were recorded. Principal component analysis enabled the differentiation of coffee grounds by origin and roasting protocol.

Probing sulphur clusters in a microfluidic electrochemical cell with synchrotron-based photoionization mass spectrometry

We present synchrotron-based mass spectrometry to probe products formed in a lithium sulphide electrolyte. In operando analysis was carried out at two different potentials in a vacuum compatible microfluidic electrochemical cell. Mass spectral observations show that the charged electrolyte formed sulphur clusters under dynamic conditions, demonstrating electrolyte electron shuttling.

Toward Smart Online Coffee Roasting Process Control: Feasibility of Real-Time Prediction of Coffee Roast Degree and Brew Antioxidant Capacity by Single-Photon Ionization Mass Spectrometric Monitoring of Roast Gases

Precise controlling and monitoring the status of the coffee roasting process is essential for consistent product quality and optimization toward targeted coffee properties. In small-scale roasting experiments, the chemical composition of the roasting off-gas was analyzed by online single-photon ionization time-of-flight mass spectrometry (SPI-TOFMS) at 118 nm with 5 s time resolution. Subsequently, mass spectra at the drop of the coffee beans were combined with off-line measurements of roast degree, described by color value "Colorette", and the antioxidant capacity, obtained from the Folin-Ciocalteu (FC) assay, in an explanatory projection on latent structure regression model. While the roast degree gives an indication of the coffee flavor, antioxidants in brewed coffee are regarded as beneficial for human health. Colorette and FC values could be derived from the SPI mass spectra with root-mean-square errors from Monte Carlo cross-validation of 6.0 and 139 mg of gallic acid equiv L^-1, respectively, and explained covariance (R²_CV) better than 89%. Finally, the regression models were applied to the SPI mass spectra over the entire roast to demonstrate the predictive ability for online process control in real time.

Real time monitoring of slow pyrolysis of polyethylene terephthalate (PET) by different mass spectrometric techniques

In the context of waste upgrading of polyethylene terephthalate (PET) by pyrolysis, this study presents three on-line mass spectrometric techniques with soft ionization for monitoring the emitted decomposition products and their thermal dependent evolution profiles. Pyrolysis experiments were performed using a thermogravimetric analyzer (TGA) under nitrogen atmosphere with a heating rate of 5 °C/min from 30 °C to 600 °C. Single-photon ionization (SPI at 118 nm/10.5 eV) and resonance enhanced multiple photon ionization (REMPI at 266 nm) were used with time-of-flight mass spectrometry (TOF-MS) for evolved gas analysis (TGA-SPI/REMPI-TOFMS). Additionally, the chemical signature of the pyrolysis products was investigated by atmospheric pressure chemical ionization (APCI) ultra high resolution Fourier Transform ion cyclotron resonance mass spectrometry (FT-ICR MS) which enables assignment of molecular sum formulas (TGA-APCI FT-ICR MS). Despite the soft ionization by SPI, the fragmentation of some compounds with the loss of the [O-CH = CH2] fragment is observed. The major compounds were acetaldehyde (m/z 44), benzoic acid (m/z 122) and a fragment of m/z 149. Using REMPI, aromatic species were selectively detected. Several series of pyrolysis products were observed in different temperature intervals, showing the presence of polycyclic aromatic hydrocarbons (PAHs), especially at high temperatures. FT-ICR MS data showed, that the CHO₄ class was the most abundant compound class with a relative abundance of 45.5%. The major compounds detected with this technique corresponded to m/z 193.0495 (C₁₀H₉O₄⁺) and 149.0233 (C₈H₅O₃⁺). Based on detailed chemical information, bulk reaction pathways are proposed, showing the formation of both cyclic monomer/dimer and linear structures.

In Situ Atmospheric Pressure Photoionization Mass Spectrometric Monitoring of Initial Pyrolysis Products of Biomass in Real Time

Knowledge on the initial and intermediate pyrolysis products of biomass is essential for the mechanistic investigation of biomass pyrolysis and further optimization of upgrading processes. The conventional method can only detect the final products, which do not resemble the initial or intermediate pyrolysis products. Here, we introduce a direct orifice sampling combined with atmospheric pressure photoionization mass spectrometry (APPI-MS) for in situ online analysis of the evolved volatile initial products from the pyrolysis of biomass. Pyrolysis experiments of both dimeric model compound (guaiacylglycerol-β-guaiacyl ether, GGGE) and poplar wood were carried out to validate the generality of the method. Generally, secondary reactions can be reduced by shortening the distance between the sample and sampling orifice. Large molecular-weight initial products up to trimers were detected during the pyrolysis of poplar wood, and no initial products larger than trimers were detected. It is inferred that in situ APPI immediately after sample extraction ensures efficient and effective product detection. Furthermore, the present work offers a promising feasible method for online tracing of reaction intermediates not only in pyrolysis but also in various reactive processes (e.g., catalytic reaction, oxidation) under operando conditions.

Gas chromatography vacuum ultraviolet spectroscopy: A review

Accelerated technological progress and increased complexity of interrogated matrices imposes a demand for fast, powerful, and resolutive analysis techniques. Gas chromatography has been for a long time a 'go-to' technique for the analysis of mixtures of volatile and semi-volatile compounds. Coupling of the several dimensions of gas chromatography separation has allowed to access a realm of improved separations in the terms of increased separation power and detection sensitivity. Especially comprehensive separations offer an insight into detailed sample composition for complex samples. Combining these advanced separation techniques with an informative detection system such as vacuum ultraviolet spectroscopy is therefore of great interest. Almost all molecules absorb the vacuum ultraviolet radiation and have distinct spectral features with compound classes exhibiting spectral signature similarities. Spectral information can be 'filtered' to extract the response in the most informative spectral ranges. Developed algorithms allow spectral mixture estimation of coeluting species. Vacuum ultraviolet detector follows Beer-Lambert law, with the possibility of calibrationless quantitation. The purpose of this article is to provide an overview of the features and specificities of gas chromatography-vacuum ultraviolet spectroscopy coupling which has gained interest since the recent introduction of a commercial vacuum ultraviolet detector. Potentials and limitations, relevant theoretical considerations, recent advances and applications are explored.

Laser Desorption Combined with Laser Postionization for Mass Spectrometry

Lasers with pulse lengths from nanoseconds to femtoseconds and wavelengths from the mid-infrared to extreme ultraviolet (UV) have been used for desorption or ablation in mass spectrometry. Such laser sampling can often benefit from the addition of a second laser for postionization of neutrals. The advantages offered by laser postionization include the ability to forego matrix application, high lateral resolution, decoupling of ionization from desorption, improved analysis of electrically insulating samples, and potential for high sensitivity and depth profiling while minimizing differential detection. A description of postionization by vacuum UV radiation is followed by a consideration of multiphoton, short pulse, and other postionization strategies. The impacts of laser pulse length and wavelength are considered for laser desorption or laser ablation at low pressures. Atomic and molecular analysis via direct laser desorption/ionization using near-infrared ultrashort pulses is described. Finally, the postionization of clusters, the role of gaseous collisions, sampling at ambient pressure, atmospheric pressure photoionization, and the addition of UV postionization to MALDI are considered.