High-throughput detection of unknown mutations by using multiplexed capillary electrophoresis with poly(vinylpyrrolidone) solution

Biocatalytic Amplification of UV Signal in Capillary Electrophoresis of MicroRNA

MicroRNAs (miRNAs) are new potential biomarkers for early diagnosis and classification of cancer. This study is the first attempt to use biocatalytic amplification reactions combined with capillary electrophoresis to detect multiple miRNAs simultaneously. In this way, miRNAs, as catalysts, can catalyze two single strands of DNA to form double-strand DNA. Feasibility was demonstrated by non-gel capillary electrophoresis coupled with UV detection (NGCE-UV). The detection limit was improved down to 1.0 nM, having ca. 10³-fold improvement. This method has a good linear range of between 3.0 nM and 300 nM, with R² at 0.99, recovery at 88–115%, and peak area precision at 1–12.7%. Using three target miRNAs as a model can achieve the baseline separation and good selectivity. The proposed biocatalysis coupled with a capillary electrophoresis-based method is simple, rapid, multiplexed, and cost-effective, making it potentially applicable for simultaneous, large-scale screening for other nucleic acids biomarkers and related research.

Nanopillar Based Enhanced-Fluorescence Detection of Surface-Immobilized Beryllium

The unique properties associated with beryllium metal ensures the continued use in many industries despite the documented health and environmental risks. While engineered safeguards and personal protective equipment can reduce risks associated with working with the metal, it has been mandated by the Environmental Protection Agency (EPA) and Occupational Safety and Health Administration (OSHA) that the workplace air and surfaces must be monitored for toxic levels. While many methods have been developed to monitor levels down to the low μg/m(3), the complexity and expense of these methods have driven the investigation into alternate methodologies. Herein, we use a combination of the previously developed fluorescence Be(II) ion detection reagent, 10-hydroxybenzo[h]quinoline (HBQ), with an optical field enhanced silicon nanopillar array, creating a new surface immobilized (si-HBQ) platform. The si-HBQ platform allows the positive control of the reagent for demonstrated reusability and a pillar diameter based tunable enhancement. Furthermore, native silicon nanopillars are overcoated with thin layers of porous silicon oxide to develop an analytical platform capable of a 0.0006 μg/L limit of detection (LOD) using sub-μL sample volumes. Additionally, we demonstrate a method to multiplex the introduction of the sample to the platform, with minimal 5.2% relative standard deviation (RSD) at 0.1 μg/L, to accommodate the potentially large number of samples needed to maintain industrial compliance. The minimal sample and reagent volumes and lack of complex and highly specific instrumentation, as well as positive control and reusability of traditionally consumable reagents, create a platform that is accessible and economically advantageous.

Capillary electrophoresis-single strand conformation polymorphism for the detection of multiple mutations leading to tuberculosis drug resistance

Drug resistant tuberculosis (TB) is a major health problem in both developed and developing countries. Mutations in the Mycobacterium (M.) tuberculosis bacterial genome, such as those to the rpoB gene and mabA-inhA promoter region, have been linked to TB drug resistance in against rifampicin and isoniazid, respectively. The rapid, accurate, and inexpensive identification of these and other mutations leading to TB drug resistance is an essential tool for improving human health. Capillary electrophoresis (CE) single strand conformation polymorphism (SSCP) can be a highly sensitive technique for the detection of genetic mutation that has not been previously explored for drug resistance mutations in M. tuberculosis. This work explores the potential of CE-SSCP through the optimization of variables such as polymer separation matrix concentration, capillary wall coating, electric field strength, and temperature on resolution of mutation detection. The successful detection of an rpoB gene mutation and two mabA-inhA promoter region mutations while simultaneously differentiating a TB-causing mycobacteria from a non-TB bacteria was accomplished using the optimum conditions of 4.5% (w/v) PDMA in a PDMA coated capillary at 20°C using a separation voltage of 278 V/cm. This multiplexed analysis that can be completed in a few hours demonstrates the potential of CE-SSCP to be an inexpensive and rapid analysis method.

ENU-based gene-driven mutagenesis in the mouse: a next-generation gene-targeting system

As a new mouse mutant resource, the RIKEN ENU-based gene-driven mutagenesis system in the mouse has been available to the research community since 2002. By using random base-substitution mutagenesis with ENU, a new reverse genetics infrastructure has been developed as a next-generation gene-targeting system. The construction of a large-scale mutant mouse library and high-throughput mutation discovery systems were the keys making it practically feasible. The RIKEN mutant mouse library consists of ~ 10,000 G1 mice, within which 100-150 mutant strains have been established based on users' requests every year. Use of the system is very simple: users 1) download an application form from our web site and send to us, and 2) design the PCR primers for the target gene. Then, we screen the RIKEN mutant mouse library and report all the detected mutations to the user. From among the allelic series of discovered mutations, users decide which mutant strain(s) to analyze and request the live mutant strain for functional studies of the target gene. Users have been reporting various functional mutations in the RIKEN mutant mouse library: e.g., missense, knockout-type and even functional non-coding mutations. In the near future, next-generation re-sequencing systems should drastically enhance the utility of the ENU-based gene-driven mutagenesis not only for the mouse but also for other species.

Mouse mutagenesis and disease models for neuropsychiatric disorders

In this chapter, mutant mouse resources which have been developed by classical genetics as well as by modern large-scale mutagenesis projects are summarized. Various spontaneous and induced mouse mutations have been archived since the rediscovery of Mendel's genetics in 1900. Moreover, genome-wide, large-scale mutagenesis efforts have recently been expanding the available mutant mouse resources. Forward genetics projects using ENU mutagenesis in the mouse were started in the mid-1990s. The widespread adoption of reverse genetics, using knockouts and conditional mutagenesis based on gene-targeting technology, followed. ENU mutagenesis has now evolved to provide a further resource for reverse genetics, with multiple point mutations in a single gene and this new approach is described. Researchers now have various options to obtain mutant mice: point mutations, transgenic mouse strains, and constitutional or conditional knockout mice. The established mutant strains have already contributed to modeling human diseases by elucidating the underlying molecular mechanisms as well as by providing preclinical applications. Examples of mutant mice, focusing on neurological and behavioral models for human diseases, are reviewed. Human diseases caused by a single gene or a small number of major genes have been well modeled by corresponding mutant mice. Current evidence suggests that quantitative traits based on polygenes are likely to be associated with a range of psychiatric diseases, and these are now coming within the range of modeling by mouse mutagenesis.

A miniaturized spatial temperature gradient capillary electrophoresis system with radiative heating and automated sample introduction for DNA mutation detection

A miniaturized spatial temperature gradient CE system with automated sample introduction for DNA mutation detection was established. Continuous electrokinetic sample injection was achieved by combining an automated slotted-vial array sample introduction device to the spatial temperature gradient CE system. The temperature gradient was produced by a radiative heating system with a single graphite block heater, and the stability of the temperature gradient was investigated. The temperature variation of each measure point was 0.12-0.21% RSD (n=7) within 6 h. A 14-cm Teflon AF-coated silica capillary was used both as the separation channel and as the liquid-core waveguide tube of fluorescence signal. Under a temperature gradient from 54.8 to 59.5°C, a low range control mutation standard (209 bp) was separated within 4 min with only 5.6 nL sample consumption. Automated continuous sample introducing and changing were realized with a carryover of 3.3%. Utility of the system was further demonstrated by detecting K-ras gene mutations in paraffin tissue sections from two colorectal cancer patients.

Miniaturization of molecular biological techniques for gene assay

The rapid diagnosis of various diseases is a critical advantage of many emerging biomedical tools. Due to advances in preventive medicine, tools for the accurate analysis of genetic mutation and associated hereditary diseases have attracted significant interests in recent years. The entire diagnostic process usually involves two critical steps, namely, sample pre-treatment and genetic analysis. The sample pre-treatment processes such as extraction and purification of the target nucleic acids prior to genetic analysis are essential in molecular diagnostics. The genetic analysis process may require specialized apparatus for nucleic acid amplification, sequencing and detection. Traditionally, pre-treatment of clinical biological samples (e.g. the extraction of deoxyribonucleic acid (DNA) or ribonucleic acid (RNA)) and the analysis of genetic polymorphisms associated with genetic diseases are typically a lengthy and costly process. These labor-intensive and time-consuming processes usually result in a high-cost per diagnosis and hinder their practical applications. Besides, the accuracy of the diagnosis may be affected owing to potential contamination from manual processing. Alternatively, due to significant advances in micro-electro-mechanical-systems (MEMS) and microfluidic technology, there are numerous miniature systems employed in biomedical applications, especially for the rapid diagnosis of genetic diseases. A number of advantages including automation, compactness, disposability, portability, lower cost, shorter diagnosis time, lower sample and reagent consumption, and lower power consumption can be realized by using these microfluidic-based platforms. As a result, microfluidic-based systems are becoming promising platforms for genetic analysis, molecular biology and for the rapid detection of genetic diseases. In this review paper, microfluidic-based platforms capable of identifying genetic sequences and diagnosis of genetic mutations are surveyed and reviewed. Some critical issues with the use of microfluidic-based systems for diagnosis of genetic diseases are also highlighted.

Next-generation gene targeting in the mouse for functional genomics

In order to elucidate ultimate biological function of the genome, the model animal system carrying mutations is indispensable. Recently, large-scale mutagenesis projects have been launched in various species. Especially, the mouse is considered to be an ideal model to human because it is a mammalian species accompanied with well-established genetic as well as embryonic technologies. In 1990's, large-scale mouse mutagenesis projects firstly initiated with a potent chemical mutagen, N-ethyl-N-nitrosourea (ENU) by the phenotype-driven approach or forward genetics. The knockout mouse mutagenesis projects with trapping/conditional mutagenesis have then followed as Phase II since 2006 by the gene-driven approach or reverse genetics. Recently, the next-generation gene targeting system has also become available to the research community, which allows us to establish and analyze mutant mice carrying an allelic series of base substitutions in target genes as another reverse genetics. Overall trends in the large-scale mouse mutagenesis will be reviewed in this article particularly focusing on the new advancement of the next-generation gene targeting system. The drastic expansion of the mutant mouse resources altogether will enhance the systematic understanding of the life. The construction of the mutant mouse resources developed by the forward and reverse genetic mutagenesis is just the beginning of the annotation of mammalian genome. They provide basic infrastructure to understand the molecular mechanism of the gene and genome and will contribute to not only basic researches but also applied sciences such as human disease modelling, genomic medicine and personalized medicine.

Capillary electropherograms for restriction fragment length polymorphism of Helicobacter pylori

Rapid identification of Helicobacter pylori strains is of importance for diagnosis and then treatment of duodenal and gastric ulcers. We developed a CE approach for the analysis of RFLP of the PCR products of urease (UreAB) gene and flagellin A (FlaA) gene fragments. Prior to CE analysis, the 2.4-kbp UreAB and 1.5-kbp FlaA PCR products were digested with the restriction enzymes HaeIII and HhaI, respectively. The DNA fragments were then separated by CE in conjunction with laser-induced fluorescence detection using poly(ethylene oxide) in the presence of electroosmotic flow. The DNA fragments range in sizes 259-1831 bp and 12-827 bp for UreAB and FlaA restriction fragments, respectively. Of 27 samples, the CE approach provided five and ten different RFLP patterns of the HaeIII and HhaI digests. The RFLP of PCR products of the two genes allow great sensitivity of identification of H. pylori strains. When compared with slab gel electrophoresis, the present CE approach provides advantages of rapidity (within 6 min per run), simplicity, and automation. The preliminary results have shown great practicality of the CE approach for screening H. pylori strains.

Electrophoretic microfluidic devices for mutation detection in clinical diagnostics

BACKGROUND

In an era of growing interest in personalized medicine - where ubiquitous patient genotyping holds unprecedented clinical utility - rapid, sensitive and low-cost methodologies will be required for the detection of genetic variants correlative with disease. Electrophoretic microfluidic devices have emerged as a promising platform for such analyses, inherently offering faster analysis, excellent reagent economy, a small laboratory footprint and potentially seamless integration of multiple analytical steps.

OBJECTIVE

Although glass and polymeric microchips have recently been developed for a wide variety of medical applications, this review focuses on their application to the detection of clinically relevant genomic DNA mutations and polymorphisms.

METHOD

Mutation analysis techniques, including direct gene sizing, enzyme-based assays, heteroduplex analysis, single-strand conformational polymorphism analysis, and multiplex, allele-specific and methylation-specific PCR are included.

CONCLUSION

Further development of 'lab-on-a-chip' or 'micro total analysis system' technologies ultimately aims to streamline and miniaturize the entire genetic analysis process, enabling rapid, point-of-care analysis for molecular diagnostics.

DNA mutation detection with chip-based temperature gradient capillary electrophoresis using a slantwise radiative heating system

A simple and robust chip-based temperature gradient capillary electrophoresis (TGCE) system was developed for DNA mutation/single-nucleotide polymorphism (SNP) analysis using a radiative heating system. Reproducible, stable and uniform temperature gradients were established along a 3 cm length of the electrophoretic separation channel using a single thermostated aluminium heater plate. The heater was slightly slanted relative to the plane of the glass chip at 0.2-1.3 degrees by inserting thin spacers between the plate and chip at one end to produce differences in radiative heating that created the temperature gradient. On-chip TGCE analyses of 4 mutant DNA model samples amplified from plasmid templates, each containing a single base substitution, with a wide range of melting temperatures, showed that mutations were successfully detected under a wide temperature gradient of 10 degrees C and within a short gradient region of about 3 cm (3.3 degrees C cm(-1) gradient). The radiative heating system was able to establish stable spatial temperature gradients along short microfluidic separation channels using simple peripheral equipment and manipulation while ensuring good resolution for detecting a wide range of mutations. Effectiveness of the system was demonstrated by the successful detection of K-ras gene mutations in 6 colon cancer cell lines.

A series of ENU-induced single-base substitutions in a long-range cis-element altering Sonic hedgehog expression in the developing mouse limb bud

Mammal-fish-conserved-sequence 1 (MFCS1) is a highly conserved sequence that acts as a limb-specific cis-acting regulator of Sonic hedgehog (Shh) expression, residing 1 Mb away from the Shh coding sequence in mouse. Using gene-driven screening of an ENU-mutagenized mouse archive, we obtained mice with three new point mutations in MFCS1: M101116, M101117, and M101192. Phenotype analysis revealed that M101116 mice exhibit preaxial polydactyly and ectopic Shh expression at the anterior margin of the limb buds like a previously identified mutant, M100081. In contrast, M101117 and M101192 show no marked abnormalities in limb morphology. Furthermore, transgenic analysis revealed that the M101116 and M100081 sequences drive ectopic reporter gene expression at the anterior margin of the limb bud, in addition to the normal posterior expression. Such ectopic expression was not observed in the embryos carrying a reporter transgene driven by M101117. These results suggest that M101116 and M100081 affect the negative regulatory activity of MFCS1, which suppresses anterior Shh expression in developing limb buds. Thus, this study shows that gene-driven screening for ENU-induced mutations is an effective approach for exploring the function of conserved, noncoding sequences and potential cis-regulatory elements.

Detection of EGFR mutations in archived cytologic specimens of non-small cell lung cancer using high-resolution melting analysis

Mutations of the epidermal growth factor receptor (EGFR), particularly deletional mutations (DEL) in exon 19 and L858R in exon 21, are reportedly correlated with clinical outcome in patients with non-small cell lung cancer (NSCLC) receiving the EGFR tyrosine kinase inhibitors gefitinib and erlotinib, suggesting that detection of EGFR mutations would have an important role in clinical decision making. We established and validated an easy, inexpensive, and rapid method for detecting DEL and L858R from cytologic material by high-resolution melting analysis (HRMA). Dilution for sensitivity studies revealed that DEL and L858R were detectable in the presence of at least 10% and 0.1% EGFR-mutant cells, respectively. We analyzed 37 archived cytological slides of specimens from 29 patients with advanced NSCLC and compared the results with direct sequencing data obtained previously. Of 37 samples, 34 (92%) yielded consistent results with direct sequencing, 2 were false negative, and 1 was indeterminate. The sensitivity of this analysis was 90% (19/21) and specificity, 100% (15/15). These results suggest that HRMA of archived cytologic specimens of advanced NSCLC is useful for detecting EGFR mutations in clinical practice.

Evaluation of sieving matrices used to separate alleles by cycling temperature capillary electrophoresis

Denaturing CE (DCE) is a powerful tool for analysis of DNA variation. The development of commercial multi-CE instruments allows large-scale studies of DNA variation (many samples and many fragments). However, the cost of consumables like capillary arrays and sieving matrix might limit the use of DCE in such studies. Thus, we have tested 72 different in-house formulated sieving matrices' ability to suppress EOF and separate PCR-amplified alleles with the DCE variant, cycling temperature CE (CTCE). The data herein demonstrate that alleles can be baseline-separated by use of PVP and poly(N,N-dimethyl acrylamide) polymers at various percentages and pH. Allele separation by CTCE is matrix-independent and consequently applicable to any capillary instrument used for DNA separation. Formulation of sieving matrix for CTCE was done by dissolving appropriate amount of polymer powder into the running buffers. Allele separation was observed at different pH (7.5-8.5), concentrations and molecular size of the polymer, without compromising the separation and reproducibility. Finally, the cost reduction of homemade matrices is more than 1000-fold as compared to commercial sieving matrices.

Separation of single-stranded DNAs using DNA conjugates having different migration properties in capillary electrophoresis

A probe-regulated simultaneous separation (PRESS) using capillary electrophoresis (CE) was developed for separating single-stranded (ss) DNAs. We synthesized two DNA conjugate probes, -(5'-TGTGTGTGT-3')p-AAm(q)- and -(5'-GCCACCAGC-3')m-AAm(n)-, by copolymerizing 5'-methacryloyl-modified ssDNA with acrylamide (AAm), and characterized them in detail. The two probes showed lower electrophoretic mobilities than 5'-methacryloyl-modified ssDNAs. Furthermore, -(5'-TGTGTGTGT-3')p-AAm(q)- showed slightly faster electrophoretic mobility toward the anode than -(5'-GCCACCAGC-3')m-AAm(n)- due to its higher molar fraction of negatively-charged ssDNA. We successfully separated target ssDNAs having the same chain length by using two ssDNA conjugate probes that showed different electrophoretic mobilities, although the separation of these ssDNAs was difficult in conventional capillary electrophoresis systems.

Identification of mutations from phenotype-driven ENU mutagenesis in mouse chromosome 7

We have used the new high-throughput mutation-scanning technique temperature-gradient capillary electrophoresis (TGCE) for the identification of point mutations induced by N-ethyl-N-nitrosourea (ENU) in the mouse genome. TGCE detects the presence of heteroduplex molecules formed between a wild-type gene segment and the corresponding homologous segment containing an induced mutation or a naturally occurring single nucleotide polymorphism (SNP). Partially denatured heteroduplex molecules are resolved from homoduplexes by virtue of their differential mobilities during capillary electrophoresis conducted in a finely controlled temperature gradient. Simultaneous heteroduplex analysis of 96 amplicons ranging from 150 to 600 bp in size is achieved in approximately 45 min without the need for predetermining the melting profile of each fragment. Initially, we exploited known mouse mutations to develop TGCE protocols for analyzing unpurified PCR samples amplified from crude tail-DNA preparations. TGCE was then applied to the rapid identification of three new ENU-induced mutations recovered from regional mutagenesis screens of a segment of mouse Chromosome 7. Enzyme assays and quantitative reverse transcription-PCR (qRT-PCR) methods validated these new mutations. Our data demonstrate that rapid mutation scanning with TGCE, followed by sequence verification only of detected positives, is an efficient approach to the identification of point mutations in the mouse genome.

Micro-separation toward systems biology

Current biology is experiencing transformation in logic or philosophy that forces us to reevaluate the concept of cell, tissue or entire organism as a collection of individual components. Systems biology that aims at understanding biological system at the systems level is an emerging research area, which involves interdisciplinary collaborations of life sciences, computational and mathematical sciences, systems engineering, and analytical technology, etc. For analytical chemistry, developing innovative methods to meet the requirement of systems biology represents new challenges as also opportunities and responsibility. In this review, systems biology-oriented micro-separation technologies are introduced for comprehensive profiling of genome, proteome and metabolome, characterization of biomolecules interaction and single cell analysis such as capillary electrophoresis, ultra-thin layer gel electrophoresis, micro-column liquid chromatography, and their multidimensional combinations, parallel integrations, microfabricated formats, and nano technology involvement. Future challenges and directions are also suggested.

Molecular characterization of ENU mouse mutagenesis and archives

The large-scale mouse mutagenesis with ENU has provided forward-genetic resources for functional genomics. The frozen sperm archive of ENU-mutagenized generation-1 (G1) mice could also provide a "mutant mouse library" that allows us to conduct reverse genetics in any particular target genes. We have archived frozen sperm as well as genomic DNA from 9224 G1 mice. By genome-wide screening of 63 target loci covering a sum of 197 Mbp of the mouse genome, a total of 148 ENU-induced mutations have been directly identified. The sites of mutations were primarily identified by temperature gradient capillary electrophoresis method followed by direct sequencing. The molecular characterization revealed that all the identified mutations were point mutations and mostly independent events except a few cases of redundant mutations. The base-substitution spectra in this study were different from those of the phenotype-based mutagenesis. The ENU-based gene-driven mutagenesis in the mouse now becomes feasible and practical.

Design of an automated multicapillary instrument with fraction collection for DNA mutation discovery by constant denaturant capillary electrophoresis (CDCE)

A fundamental goal ingenomics is the discovery of genetic variation that contributes to disease states or to differential drug responses. Single nucleotide polymorphism (SNP) detection has been the focus of much attention in the study of genetic variation over the last decade. These SNPs typically occur at a frequency greater than 1% in the human genome. Recently, low-frequency alleles are also being increasingly recognized as critical to obtain an improved understanding of the correlation between genetic variation and disease. Although many methods have been reported for the discovery and scoringof SNPs, sensitive, automated, and cost-effective methods and platforms for the discovery of low-frequency alleles are not yet readily available. We describe here an automated multicapillary instrument for high-throughput detection of low-frequency alleles from pooled samples using constant denaturant capillary electrophoresis. The instrument features high optical sensitivity (1 x 10(-12) M fluorescein detection limit), precise and stable temperature control (+/- 0.01degrees C), and automation for sample delivery, injection, matrix replacement, and fraction collection. The capillary array is divided into six groups of four capillaries, each of which can be independently set at any temperature ranging from room temperature to 90 degrees C. The key performance characteristics of the instrument are reported.

Detection of single-base mutation by affinity capillary electrophoresis using a DNA-polyacrylamide conjugate

We have developed an affinity capillary electrophoresis (ACE) method for detection of gene point mutations using a DNA-polyacrylamide conjugate as a pseudostationary affinity phase. In this study, the target DNA was prepared by mixing two PCR products: the wild type of K-ras gene and its codon 12 point mutant. The ligand DNA was designed to be complementary to codons 11 and 12 of the wild type. The target DNA was denatured by the addition of formamide and by heating at 95 degrees C for 5 min, and then electrophoretically separated by difference in affinity to the pseudoimmobilized ligand DNA. The method successfully separated a mixture of the wild-type DNA and each of six codon 12 point mutants by the same ligand DNA. The limit of mutation detection was determined by mixing the wild-type DNA with decreasing concentrations of the mutant DNA. The lowest level of detection was 10% mutant DNA in a background of the wild type. The practicability of this method has been confirmed using a colorectal carcinoma cell line. This study is the first demonstration of detection of gene point mutation in polymerase chain reaction (PCR) products using ACE, and opens up a new possibility of CE-based gene diagnosis.

Denaturing gradient-based two-dimensional gene mutation scanning in a polymer microfluidic network

An integrated two-dimensional (2-D) DNA separation platform, combining standard gel electrophoresis with temperature gradient gel electrophoresis (TGGE) on a polymer microfluidic chip, is reported. Rather than sequentially sampling DNA fragments eluted from standard gel electrophoresis, size-resolved fragments are simultaneously electrokinetically transferred into an array of orthogonal microchannels and screened for the presence of sequence heterogeneity by TGGE in a parallel and high throughput format. A bulk heater assembly is designed and employed to externally generate a temporal temperature gradient along an array of TGGE channels. Extensive finite element modeling is performed to determine the optimal geometries of the microfluidic network for minimizing analyte band dispersion caused by interconnected channels in the network. A pH-mediated on-chip analyte stacking strategy is employed prior to the parallel TGGE separations to further reduce additional band broadening acquired during the electrokinetic transfer of DNA fragments between the first and second separation dimensions. A comprehensive 2-D DNA separation is completed in less than 5 min for positive detection of single-nucleotide polymorphisms in multiplex PCR products that vary in size and sequence.

Capillary electrophoretic discrimination of single nucleotide polymorphisms using an oligodeoxyribonucleotidepolyacrylamide conjugate as a pseudo-immobilized affinity ligand: optimum ligand length predicted by the melting temperature values

We developed a weak-affinity separation system for single-nucleotide polymorphisms (SNPs) based on capillary electrophoresis. In this approach, single-stranded DNA (ssDNA)-polyacrylamide (polyAAm) conjugate was used as a pseudo-immobilized affinity ligand to separate the target DNA, cytochrome P450 2C9 (CYP2C9), and its point mutant. The ligand DNA was designed to be complementary to the normal DNA, and the target DNA was electrophoretically separated by the difference in the affinity with the pseudo-immobilized ligand in the capillary. We showed that the separation efficiency was closely associated with the Tm value of double-stranded DNA (dsDNA) consisting of the target and ligand DNA, which depends on the measurement conditions, such as the base number of the ligand DNA and the concentration of Mg2+ in the buffer solution.

Rapid pKa estimation using vacuum‐assisted multiplexed capillary electrophoresis (VAMCE) with ultraviolet detection

A rapid approach for estimating the pK(a) value of small organic molecules was developed using vacuum-assisted multiplexed capillary electrophoresis (VAMCE) with ultraviolet detection. The VAMCE method employed a 96-capillary array, arranged in a standard 8 x 12 microtiter plate configuration, with each row of capillaries filled with 12 individual running buffers of equal ionic strength (I = 50 mM) covering a pH range from 2.2 to 10.7. A separate compound was injected hydrodynamically into each row of capillaries allowing the estimation of pK(a) values for eight compounds in a single run. The application of a vacuum during the separation generated a bulk fluid flow and allowed the electrophoretic separation to be completed within 5 min. The complete VAMCE method, conditioning, and electrophoretic separation was optimized to allow the pK(a) estimation for between 128 to 168 compounds in an 8-h period. The VAMCE method provided a reliable approach for estimating pK(a) values both within- and between-day. The pK(a) values for a series of 96 compounds estimated by VAMCE agreed well with some of literature pK(a) values with an average absolute difference of 0.22 log units.

Complete gene scanning by temperature gradient capillary electrophoresis using the cystic fibrosis transmembrane conductance regulator gene as a model

Many inherited diseases involve large genes with many different mutations. Identifying a wide spectrum of mutations requires an efficient gene-scanning method. By differentiating thermodynamic stability and mobility of heteroduplexes from heterozygous samples, temperature gradient capillary electrophoresis (TGCE) was used to scan the entire coding region of the cystic fibrosis transmembrane conductance regulator gene. An initial panel (29 different mutations) showed 100% agreement between TGCE scanning and previously genotyped results for heterozygous samples. Different peak patterns were observed for single base substitutions and base insertions/deletions. Subsequently, 12 deidentified clinical samples genotyped as wild type for 32 mutations were scanned for the entire 27 exons. Results were 100% concordance with the bidirectional sequence analysis. Ten samples had nucleotide variations including a reported base insertion in intron 14b (2789 + 2insA) resulting in a possible mRNA splicing defect, and an unreported missense mutation in exon 20 (3991 G/A) with unknown clinical significance. This methodology does not require labeled primers or probes for detection and separation through a temperature gradient eliminates laborious temperature optimization required for other technologies. TGCE automation and high-throughput capability can be implemented in a clinical environment for mutation scanning with high sensitivity, thus reducing sequencing cost and effort.

Nanomaterials and chip-based nanostructures for capillary electrophoretic separations of DNA

Capillary electrophoresis (CE) and microchip capillary electrophoresis (MCE) using polymer solutions are two of the most powerful techniques for the analysis of DNA. Problems, such as the difficulty of filling polymer solution to small separation channels, recovering DNA, and narrow separation size ranges, have put a pressure on developing new techniques for DNA analysis. In this review, we deal with DNA separation using chip-based nanostructures and nanomaterials in CE and MCE. On the basis of the dependence of the mobility of DNA molecules on the size and shape of nanostructures, several unique chip-based devices have been developed for the separation of DNA, particularly for long DNA molecules. Unlike conventional CE and MCE methods, sieving matrices are not required when using nanostructures. Filling extremely low-viscosity nanomaterials in the presence and absence of polymer solutions to small separation channels is an alternative for the separations of DNA from several base pairs (bp) to tens kbp. The advantages and shortages of the use of nanostructured devices and nanomaterials for DNA separation are carefully addressed with respect to speed, resolution, reproducibility, costs, and operation.

Heteroduplex-based genotyping with microchip electrophoresis and dHPLC

This work compares the methods of mutation detection via denaturing high-performance liquid chromatography (dHPLC) and a microchip-based heteroduplex analysis (HA) method. The mutations analyzed were 185delAG and 5382insC in BRCA1 and 6174delT in BRCA2 with, as additional examples, 188del11 and 5396 + 1G --> A in BRCA1. Our HA method is based upon the use of a replaceable, highly denaturing sieving matrix that has dynamic coating capabilities, rendering our method relatively insensitive to contamination. We have found significant advantages in the microchip analysis in terms of reagent consumption, ease of use, versatility, simplicity of the protocol, the lack of constraints upon sample preparation or content, and the lack of parameters that need be adjusted. Although HA methods have a lower sensitivity than that of dHPLC, the electropherograms of the present HA method appear to provide more information and may allow mutations within the same amplicon to be distinguished. Although the dHPLC method has a remarkably high sensitivity, with this sensitivity there come constraints that may prevent it, in its present form, from being used in some applications, particularly those involving higher levels of integration. The advantages of the present HA method, along with recent developments in microchip-based single-nucleotide polymorphism (SNP) detection and high-throughput arrays, suggest that microchip-based systems could provide compact and integrated platforms capable of large-scale genotyping or mutational screening.

Parallel separations of oligonucleotides with optically gated sample introduction on multichannel microchips

With the release of the human genome sequence, there has been increasing attention given to other genetic analyses, including the detection of genetic variations and fast sequencing of multiple samples for pharmacogenomics studies. Rapid injections of samples in multiplexed separation channels by optically gated sample introduction are shown here for DNA separation. Serial separations of four amino acids are shown in less than four seconds on a microchip with four multiplexed channels. Five short oligonucleotides have also been rapidly separated in 2% LPA with four channels using this technique. In addition, multiple unique samples have been simultaneously separated and five-base resolution has been demonstrated.

Capillary electrophoretic restriction fragment length polymorphism patterns for the Mycobacterial hsp65 gene

PCR-restriction fragment length polymorphism (RFLP) analysis is a nonprobe method for the rapid identification of Mycobacterium species. We demonstrate the separation of DNA or restriction fragments digested from the mycobacterial gene encoding the 65-kDa heat shock protein (hsp65) by capillary electrophoresis (CE). By using a pair of unlabeled primers, Tb11 and Tb12, and only one restriction enzyme, HaeIII, we investigated a total of 52 reference and clinical strains encompassing 12 Mycobacterium species. The electrophoretic separation of high-resolution CE required <20 min and was capable of identifying fragments as small as 12 bp. A good agreement of measurement was observed between the sizes of restriction fragments resolved by CE, and the real sizes were deduced from the sequence analysis. Distinct differentiations were also well demonstrated between some species and subspecies by an extra HaeIII digestion site. With the advantage of the complete RFLP pattern available from CE, it appears to be more convenient to use an electropherogram rather than performing the cumbersome slab gel electrophoresis plus diagnostic algorithm to identify Mycobacterium species. Beyond the agarose and polyacrylamide gel electrophoresis, high-resolution CE provides an alternative for rapid identification of Mycobacterium species that is feasible for automation and routine use without the need for costly probes.

Mutation and single nucleotide polymorphism detection using temperature gradient capillary electrophoresis

Rapid, high-throughput mutation and single nucleotide polymorphism detection technologies are necessary to identify sequence alterations responsible for human disease. Several screening techniques have been developed as alternatives to the costly and time-consuming task of direct gene sequencing. Unfortunately, many of these techniques have relatively low mutation detection sensitivities and/or require significant up-front assay optimization. Temperature gradient capillary electrophoresis is a relatively new mutation screening technology that capitalizes on the denaturing effects of temperature and the high resolution capacity of capillary electrophoresis to detect heteroduplexes formed between mutant and wild type gene sequences. The utility of temperature gradient capillary electrophoresis for the detection of known sequence alterations and as a tool for mutation discovery is reviewed.

Application of multiplexed capillary electrophoresis with laser-induced fluorescence (MCE-LIF) detection for the rapid measurement of endogenous extracellular signal-regulated protein kinase (ERK) levels in cell extracts

Multiplexed (96-lane) capillary electrophoresis with laser-induced fluorescence (MCE-LIF) detection was used for the rapid analysis of extracellular signal-regulated protein kinase (ERK) levels from in vitro cell extracts. The levels of ERK enzyme in cell extracts were determined by monitoring the conversion of a fluorescent-labeled peptide substrate to a phosphorylated fluorescent-labeled peptide product using MCE-LIF. The incorporation of a fluorescent internal standard was found to improve the precision of the analysis. The enzyme assay conditions including substrate concentration, reaction time and enzyme linear range were rapidly optimized using the MCE-LIF approach for both direct and immunoprecipitation-based ERK assays. The levels of ERK from in vitro cell extracts stimulated with angiopoietin 1 (Ang1*) were determined using the MCE-LIF approach. The advantages of MCE-LIF for developing and applying enzyme assays, as well as the figures of merit for the direct and immunoprecipitation ERK assays, are discussed.

Detection of bacterial pathogen DNA using an integrated complementary metal oxide semiconductor microchip system with capillary array electrophoresis

In this paper, we show an integrated complementary metal oxide semiconductor (CMOS)-based microchip system with capillary array electrophoresis (CAE) for the detection of bacterial pathogen amplified by polymerase chain reaction (PCR). In order to demonstrate the efficacy of PCR reaction for the heat-labile toxin producing enterotoxigenic Escherichia coli (E. coli), which causes cholera-like diarrhea, 100 bp DNA ladders were injected along with the PCR product. Poly(vinylpyrrolidone) (PVP) was used as the separation medium and provided separation resolution which was adequate for the identification of PCR product. The miniaturized integrated CMOS microchip system with CAE has excellent advantages over conventional instrumental systems for analysis of bacterial pathogens such as compactness, low cost, high speed, and multiplex capability. Furthermore, the miniaturized integrated CMOS microchip system should be compatible with a variety of microfabricated devices that aim at more rapid and high-throughput analysis.

The mouse: genetics meets behaviour

Genetic studies in the mouse are important in the elucidation of molecular pathways that underlie behaviour. The advantages of the mouse for behavioural studies include an extensive array of genetic technologies and an elaborate behavioural repertoire that can be used to create models of human disease. This review discusses the relative advantages of forward and reverse genetic approaches to studying the genetic basis of behaviour in the mouse, and the complexities that behavioural studies need to address, such as phenotypic variability, genetic background effects and pleiotropy.

Evaluation of different nucleic acid stains for sensitive double-stranded DNA analysis with capillary electrophoretic separation

This paper outlines the first use of SYTOX Orange, SYTO 82 and SYTO 25 nucleic acid stains for on-column staining of double-stranded DNA (dsDNA) fragments separated by capillary electrophoresis (CE). Low-viscosity, replaceable poly(vinylpyrrolidone) (PVP) polymer solution was used as the sieving matrix on an uncoated fused-silica capillary. The effects of PVP concentration, electric field strength, and incorporated nucleic acid stain concentrations on separation efficiency were examined for a wide range of DNA fragment sizes. Our study was focused on using nucleic acid stains efficiently excitable at a wavelength of 532 nm. Among the five tested nucleic acid stains, SYTOX Orange stain was shown to have the best sensitivity for dsDNA detection by CE. About a 500-fold lower detection limit was obtained compared to commonly used ethidium bromide and propidium iodide. SYTOX Orange stain also provided a wide linear dynamic range for direct DNA quantitation with on-line CE detection. Use of SYTOX Orange stain can greatly improve the measurement of DNA fragments by CE, which will enable an expanded set of applications in genomics and diagnostics.

Temperature-modulated array high-performance liquid chromatography

Using novel monolithic poly(styrene-divinylbenzene) capillary columns with an internal diameter of 0.2 mm, we demonstrate for the first time the feasibility of constructing high-performance liquid chromatography arrays for the detection of mutations by heteroduplex analysis under partially denaturing conditions. In one embodiment, such an array can be used to analyze one sample simultaneously at different temperatures to maximize the detection of mutations in DNA fragments containing multiple discrete melting domains. Alternatively, one may inject different samples onto columns kept at the same effective temperature. Further improvements in throughput can be obtained by means of laser-induced fluorescence detection and the differential labeling of samples with up to four different fluorophores. Major advantages of monolithic capillary high-performance liquid chromatographic arrays over their capillary electrophoretic analogs are the chemical inertness of the poly(styrene-divinylbenzene) stationary phase, the physical robustness of the column bed due to its covalent linkage to the inner surface of the fused silica capillary, and the feasibility to modify the stationary phase thereby allowing the separation of compounds not only on the principle of size exclusion, but also adsorption, distribution, and ion exchange. Analyses times are on the order of a few minutes and turnaround time is extremely short as there is no need for the replenishment of the separation matrix between runs.

Spatial temperature gradient capillary electrophoresis for DNA mutation detection

A continuous spatial temperature gradient was established in capillary electrophoresis by using a simple temperature control device. The temperature profile along the capillary was predicted by theoretical calculations. A nearly linear spatial temperature gradient was established and applied to DNA mutation detection. By spanning a wide temperature range, it was possible to perform simultaneous heteroduplex analysis for various mutation types that have different melting temperatures.

Separation of DNA fragments and single strand conformation polymorphism analysis in bare capillaries using poly(acrylamide-dimethylacrylamide) as a separation medium

A short chain poly(acrylamide-dimethylacrylamide) (PADMA) was synthesized in aqueous phase using isopropanol as a chain transfer agent, and was characterized according to the chemical composition and molecular mass. This polymer can form a stable dynamic coating on the inner surface of the capillary, thereby suppressing the electroosmotic flow and DNA-capillary wall interaction. The sieving medium has low viscosity and capillary filling with this medium and medium replacement were conveniently carried out by commercial capillary electrophoresis instruments. The effects of components and concentration of copolymers on the separation of DNA fragments were investigated. Highly efficient separation of DNA fragments, successful single strand conformation polymorphism (SSCP) analysis and good reproducibility of the migration time were obtained in bare capillaries using these copolymers as sieving media. Our preliminary results demonstrate that PADMA will become an alternative matrix for DNA separation by capillary electrophoresis.