Molecular Diagnosis of COVID-19: Challenges and Research Needs

Integration of a Cas12a-mediated DNAzyme actuator with efficient RNA extraction for ultrasensitive colorimetric detection of viral RNA

Developing highly sensitive and specific on-site tests is imperative to strengthen preparedness against future emerging infectious diseases. Here, we describe the construction of a Cas12a-mediated DNAzyme actuator capable of converting the recognition of a specific DNA sequence into an amplified colorimetric signal. To address viral RNA extraction challenges for on-site applications, we developed a rapid and efficient method capable of lysing the viral particles, preserving the released viral RNA, and concentrating the viral RNA. Integration of the DNAzyme actuator with the viral RNA extraction method and loop-mediated isothermal amplification enables a streamlined colorimetric assay for highly sensitive colorimetric detection of respiratory RNA viruses in gargle and saliva. This assay can detect as few as 83 viral particles/100 μL in gargle and 166 viral particles/100 μL in saliva. The entire assay, from sample processing to visual detection, was completed within 1 h at a single controlled temperature. We validated the assay by detecting SARS-CoV-2 in 207 gargle and saliva samples, achieving a clinical sensitivity of 96.3 % and specificity of 100%. The assay is adaptable for detecting specific nucleic acid sequences in other pathogens and is suitable for resource-limited settings.

CRISPR-Cas12a-based ultrasensitive assay for visual detection of SARS-CoV-2 RNA

The development of ultrasensitive and visual methods is of great significance for molecular diagnosis at the point-of-care. In this study, we have integrated recombinase polymerase amplification (RPA) with the CRISPR-Cas12a system to design an ultrasensitive strategy for visual nucleic acid testing. RPA is utilized to amplify the target nucleic acid, producing amplicons that activate the single-stranded DNase property of CRISPR-Cas12a. The activated CRISPR-Cas12a then degrades the single-stranded DNA on magnetic nanoparticles (MNPs), releasing immobilized GOx from the MNPs which catalyses the chromogenic substrate. The developed method exhibits remarkable sensitivity, successfully detecting as low as 10 aM (∼6 copies per μL) of the target nucleic acid by visual colour changes in solution. The instrumental limit of detection is calculated to be 2.86 aM (∼2 copies per μL), comparable to the sensitivity of polymerase chain reaction (PCR). Importantly, this approach only requires isothermal incubation operation and does not involve costly instruments. The method has been validated by visually detecting the SARS-CoV-2 RNA gene fragment within 50 minutes. With its ultrasensitivity, simplicity of operation, and potential for integration into a point-of-care detection kit, this strategy holds great promise for nucleic acid testing in various settings.

Ultra-sensitive detection of SARS-CoV-2 S1 protein by coupling rolling circle amplification with poly(N-isopropylacrylamide)-based sandwich-type assay

In the past few years, the COVID-19 pandemic, caused by Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) seriously threatens global public health security due to its high contagiousness. It remains of vital importance to develop a rapid and sensitive assay for SARS-CoV-2. In this work, we proposed a sandwich-type assay based on poly(N-isopropylacrylamide) (PNIPAM), allowing efficient detection of the SARS-CoV-2 S1 protein in the homogeneous solution. Firstly, a direct sandwich-type assay was established with a linear range of 0.2-2 μg/mL and a limit of detection (LOD) of 0.11 μg/mL, which could realize rapid detection in about 1 h. Furthermore, the sandwich-type assay coupled with rolling circle amplification (RCA) obtained an increase in sensitivity of 5.9 × 104 folds with a wide linear range of 0.01 - 100 ng/mL and a LOD of 1.88 pg/mL. The average recoveries in unpretreated saliva were 90 %-113.0 %, indicating the potential of the developed method for application in practical samples. Given the high selectivity and sensitivity of the developed method, it has a significant potential for rapid and early detection of SARS-CoV-2.

Disorders with Ophthalmic and Thoracic Involvement

A variety of systemic conditions involve the thorax and the eyes. While subtle or nonspecific eye symptoms can be the initial clinical manifestation of some disorders, there can be additional manifestations in the thorax that lead to a specific diagnosis and affect patient outcomes. For instance, the initial clinical manifestation of Sjögren syndrome is dry eye or xerophthalmia; however, the presence of Sjögren lung disease represents a fourfold increase in mortality. Likewise, patients with acute sarcoidosis can initially present with pain and redness of the eye from uveitis in addition to fever and parotitis. Nearly 90% of patients with sarcoidosis have thoracic involvement, and the ophthalmologic symptoms can precede the thoracic symptoms by several years in some cases. Furthermore, a diagnosis made in one system can result in the screening of other organs as well as prompt genetic evaluation and examination of family members, such as in the setting of Marfan syndrome or Ehlers-Danlos syndrome. Multimodality imaging, particularly CT and MRI, plays a vital role in identification and characterization of these conditions. While it is helpful for ophthalmologists to be knowledgeable about these conditions and their associations so that they can order the pertinent radiologic studies, it is also important for radiologists to use the clues from ophthalmologic examination in addition to imaging findings to suggest a specific diagnosis. Systemic conditions with thoracic and ophthalmologic manifestations can be categorized as infectious, inflammatory, autoimmune, neoplastic, or hereditary in origin. The authors describe a spectrum of these conditions based on their underlying cause. ©RSNA, 2024.

Development of a reverse transcription loop-mediated isothermal amplification assay with novel quantitative pH biosensor readout method for SARS-CoV-2 detection

Reverse transcription loop-mediated isothermal amplification (RT-LAMP) is a molecular amplification method that can detect SARS-CoV-2 in a shorter time than the current gold-standard molecular diagnostic reverse transcription-polymerase chain reaction (RT-PCR). However, previously developed RT-LAMP assays have mostly relied on highly subjective visual colorimetric interpretation. In this study, an RT-LAMP assay was developed with quantitative measurement of reaction pH using a novel portable pH biosensor compared to qualitative colorimetric interpretation and gel electrophoresis, with 57 clinical COVID-19 samples used for validation of the test. The LoD of the assay is 103 copies/μL. The highest sensitivity was found in the qualitative methods (93.75%), while the highest specificity and likelihood ratio was found in the pH sensor (87.5% and 6.72). On the sensor measurement, a significant difference (p < 0.0001) was observed between the average pH of the RT-PCR (+) COVID-19 (6.15 ± 0.27), while the average pH of the RT-PCR (-) samples (6.72 ± 0.22). Correlation analysis revealed a strong correlation (r = 0.78, p < 0.0001) between the Ct values obtained from RT-PCR with the biosensor pH readout. RT-LAMP with the quantitative pH sensor readout method has the potential to be further developed as an objective molecular assay for rapid and simple detection of SARS-CoV-2.

BRET-based biosensors for SARS-CoV-2 oligonucleotide detection

The need for the early detection of emerging pathogenic viruses and their newer variants has driven the urgent demand for developing point-of-care diagnostic tools. Although nucleic acid-based methods such as reverse transcription-quantitative polymerase chain reaction (RT-qPCR) and loop-mediated isothermal amplification (LAMP) have been developed, a more facile and robust platform is still required. To address this need, as a proof-of-principle study, we engineered a prototype-the versatile, sensitive, rapid, and cost-effective bioluminescence resonance energy transfer (BRET)-based biosensor for oligonucleotide detection (BioOD). Specifically, we designed BioODs against the SARS-CoV-2 parental (Wuhan strain) and B.1.617.2 Delta variant through the conjugation of specific, fluorescently modified molecular beacons (sensor module) through a complementary oligonucleotide handle DNA functionalized with the NanoLuc (NLuc) luciferase protein such that the dissolution of the molecular beacon loop upon the binding of the viral oligonucleotide will result in a decrease in BRET efficiency and, thus, a change in the bioluminescence spectra. Following the assembly of the BioODs, we determined their kinetics response, affinity for variant-specific oligonucleotides, and specificity, and found them to be rapid and highly specific. Furthermore, the decrease in BRET efficiency of the BioODs in the presence of viral oligonucleotides can be detected as a change in color in cell phone camera images. We envisage that the BioODs developed here will find application in detecting viral infections with variant specificity in a point-of-care-testing format, thus aiding in large-scale viral infection surveillance.

Self-Assembly of Single-Virus SERS Hotspots for Highly Sensitive In Situ Detection of SARS-CoV-2 on Solid Surfaces

Microbial surface transmission has aroused great attention since the pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Developing a simple in situ detection method for viruses on solid surfaces is of great significance for timely public health surveillance. Taking advantage of the natural structure of SARS-CoV-2, we reported the assembly of Au@AgNPs on the surface of a single virus by the specific aptamer-spike protein interaction. Multiple hotspots can be created between the neighboring Au@AgNPs for the highly sensitive surface-enhanced Raman scattering (SERS) detection of SARS-CoV-2. Using two different aptamers labeled with Cy3 and Au@AgNPs, in situ SERS detection of pseudotyped SARS-CoV-2 (PSV) on packaging surfaces was achieved within 20 min, with a detection limit of 5.26 TCID50/mL. For the blind testing of 20 PSV-contaminated packaging samples, this SERS aptasensor had a sensitivity of 100% and an accuracy of 100%. This assay has been successfully applied to in situ detection of PSV on the surfaces of different packaging materials, suggesting its potential applicability.

Iso-E-Codelock: A Rebuilding-free Electrochemical Chip with a Customizable Decoding Probe for Real-Time and Portable Pathogen Diagnostics

In order to realize portable pathogen diagnostics with easier quantitation, digitization and integration, we develop a ready-to-use electrochemical sensing strategy (Iso-E-Codelock) for real-time detection of isothermal nucleic acid amplification. Bridged by a branched DNA as codelock, the isothermal amplicon is transduced into increased current of an electrochemical probe, holding multiple advantages of high sensitivity, high selectivity, signal-on response, "zero" background and one-pot operation. Through a self-designed portable instrument (BioAlex PHE-T), the detection can be implemented on a multichannel microchip and output real-time amplification curves just like an expensive commercial PCR machine. The microchip is a rebuilding-free and disposable component. The branch codelock probe can be customized for different targets and designs. Such high performance and flexibility have been demonstrated utilizing four virus (SARS-CoV-2, African swine fever, FluA and FluB) genes as targets, and two branch (3-way and 4-way) DNAs as codelock probes.

A CRISPR/Cas12 trans-cleavage reporter enabling label-free colorimetric detection of SARS-CoV-2 and its variants

We present a label-free colorimetric CRISPR/Cas-based method enabling affordable molecular diagnostics for SARS-CoV-2. This technique utilizes 3,3'-diethylthiadicarbocyanine iodide (DISC2(5)) which exhibits a distinct color transition from purple to blue when it forms dimers by inserting into the duplex of the thymidine adenine (TA) repeat sequence. Loop-mediated isothermal amplification (LAMP) or recombinase polymerase amplification (RPA) was used to amplify target samples, which were subsequently subjected to the CRISPR/Cas12a system. The target amplicons would activate Cas12a to degrade nearby TA repeat sequences, preserving DISC2(5) in its free form to display purple as opposed to blue in the absence of the target. Based on this design approach, SARS-CoV-2 RNA was colorimetrically detected very sensitively down to 2 copies/μL, and delta and omicron variants of SARS-CoV-2 were also successfully identified. The practical diagnostic utility of this method was further validated by reliably identifying 179 clinical samples including 20 variant samples with 100% clinical sensitivity and specificity. This technique has the potential to become a promising CRISPR-based colorimetric platform for molecular diagnostics of a wide range of target pathogens.

Development of a self-contained microfluidic chip and an internet-of-things-based point-of-care device for automated identification of respiratory viruses

The COVID-19 pandemic greatly impacted the in vitro diagnostic market, leading to the development of new technologies such as point-of-care testing (POCT), multiplex testing, and digital health platforms. In this study, we present a self-contained microfluidic chip integrated with an internet-of-things (IoT)-based point-of-care (POC) device for rapid and sensitive diagnosis of respiratory viruses. Our platform enables sample-to-answer diagnostics within 70 min by automating RNA extraction, reverse transcription-loop-mediated isothermal amplification (RT-LAMP), and fluorescence detection. The microfluidic chip is designed to store all the necessary reagents for the entire diagnostic assay, including a lysis buffer, a washing buffer, an elution buffer, and a lyophilized RT-LAMP cocktail. It can perform nucleic acid extraction, aliquoting, and gene amplification in multiple reaction chambers without cross-contamination. The IoT-based POC device consists of a Raspberry Pi 4 for device control and data processing, a CMOS sensor for measuring fluorescence signals, a resistive heater panel for temperature control, and solenoid valves for controlling the movement of on-chip reagent solutions. The proposed device is portable and features a touchscreen for user control and result display. We evaluated the performance of the platform using 11 clinical respiratory virus samples, including 5 SARS-CoV-2 samples, 2 influenza A samples, and 4 influenza B samples. All tested clinical samples were accurately identified with high specificity and fidelity, demonstrating the ability to simultaneously detect multiple respiratory viruses. The combination of the integrated microfluidic chip with the POC device offers a simple, cost-effective, and scalable solution for rapid molecular diagnosis of respiratory viruses in resource-limited settings.

Time-encoded electrical detection of trace RNA biomarker by integrating programmable molecular amplifier on chip

One of the serious challenges facing modern point-of-care (PoC) molecular diagnostic platforms relate to reliable detection of low concentration biomarkers such as nucleic acids or proteins in biological samples. Non-specific analyte-receptor interactions due to competitive binding in the presence of abundant molecules, inefficient mass transport and very low number of analyte molecules in sample volume, in general pose critical hurdles for successful implementation of such PoC platforms for clinical use. Focusing on these specific challenges, this work reports a unique PoC biosensor that combines the advantages of nanoscale biologically-sensitive field-effect transistor arrays (BioFET-arrays) realized in a wafer-scale top-down nanofabrication as high sensitivity electrical transducers with that of sophisticated molecular programs (MPs) customized for selective recognition of analyte miRNAs and amplification resulting in an overall augmentation of signal transduction strategy. The MPs realize a programmable universal molecular amplifier (PUMA) in fluidic matrix on chip and provide a biomarker-triggered exponential release of small nucleic acid sequences easily detected by receptor-modified BioFETs. A common miRNA biomarker LET7a was selected for successful demonstration of this novel biosensor, achieving limit of detection (LoD) down to 10 fM and wide dynamic ranges (10 pM-10 nM) in complex physiological solutions. As the determination of biomarker concentration is implemented by following the electrical signal related to analyte-triggered PUMA in time-domain instead of measuring the threshold shifts of BioFETs, and circumvents direct hybridization of biomarkers at transducer surface, this new strategy also allows for multiple usage (>3 times) of the biosensor platform suggesting exceptional cost-effectiveness for practical use.

PCR Independent Strategy-Based Biosensors for RNA Detection

RNA is an important information and functional molecule. It can respond to the regulation of life processes and is also a key molecule in gene expression and regulation. Therefore, RNA detection technology has been widely used in many fields, especially in disease diagnosis, medical research, genetic engineering and other fields. However, the current RT-qPCR for RNA detection is complex, costly and requires the support of professional technicians, resulting in it not having great potential for rapid application in the field. PCR-free techniques are the most attractive alternative. They are a low-cost, simple operation method and do not require the support of large instruments, providing a new concept for the development of new RNA detection methods. This article reviews current PCR-free methods, overviews reported RNA biosensors based on electrochemistry, SPR, microfluidics, nanomaterials and CRISPR, and discusses their challenges and future research prospects in RNA detection.

Unleashing inkjet-printed nanostructured electrodes and battery-free potentiostat for the DNA-based multiplexed detection of SARS-CoV-2 genes

Following the global COVID-19 pandemic triggered by SARS-CoV-2, the need for rapid, specific and cost-effective point-of-care diagnostic solutions remains paramount. Even though COVID-19 is no longer a public health emergency, the disease still poses a global threat leading to deaths, and it continues to change with the risk of new variants emerging causing a new surge in cases and deaths. Here, we address the urgent need for rapid, cost-effective and point-of-care diagnostic solutions for SARS-CoV-2. We propose a multiplexed DNA-based sensing platform that utilizes inkjet-printed nanostructured gold electrodes and an inkjet-printed battery-free near-field communication (NFC) potentiostat for the simultaneous quantitative detection of two SARS-CoV-2 genes, the ORF1ab and the N gene. The detection strategy based on the formation of an RNA-DNA sandwich structure leads to a highly specific electrochemical output. The inkjet-printed nanostructured gold electrodes providing a large surface area enable efficient binding and increase the sensitivity. The inkjet-printed battery-free NFC potentiostat enables rapid measurements and real-time data analysis via a smartphone application, making the platform accessible and portable. With the advantages of speed (5 min), simplicity, sensitivity (low pM range, ∼450% signal gain) and cost-effectiveness, the proposed platform is a promising alternative for point-of-care diagnostics and high-throughput analysis that complements the COVID-19 diagnostic toolkit.

Microfluidics as diagnostic tools

The challenges in the management of human diseases are largely determined by the precision, speed and ease of diagnostic procedures available. Developments in biomedical engineering technologies have greatly helped in transforming human health care, especially for disease diagnosis which in turn lead to better patient outcomes. One such development is in the form of microfluidic chip technology which has transformed various aspects of human health care. We present in this review, a comprehensive account on the utility of microfluidic chip technologies for the diagnosis of autoimmune disorders, cardiovascular diseases (CVDs), infectious diseases, and neurodegenerative conditions. We have included the diseases posing global threat such as rheumatoid arthritis, diabetes, pernicious anemia, tuberculosis, COVID-19, influenza, alzheimer's, multiple sclerosis, and epilepsy. Apart from discussing the ways of microfluidic chip in diagnosis, we included a section presenting electrochemical, electrical, optical, and acoustic detection technologies for the precise diagnosis of CVDs. Microfluidics platforms have thus revolutionized novel capabilities in addressing the requirements of point-of-care diagnostics enabling miniaturization by integrating multiple laboratory functions into a single chip resulting in "one flow - one solution" systems. Hence, the precision and early diagnoses of diseases are now possible due to the advancements of microfluidics-based technology.

Enhancing Loop-Mediated Isothermal Amplification through Nonpowered Nanoelectric Preconcentration

The global threat posed by the COVID-19 pandemic has catalyzed the development of point-of-care (POC) molecular diagnostics. While loop-mediated isothermal amplification (LAMP) stands out as a promising technique among FDA-approved methods, it is occasionally susceptible to a high risk of false positives due to nonspecific amplification of a primer dimer. In this work, we report an enhancing LAMP technique in terms of assay sensitivity and reliability through streamlined integration with a nonpowered nanoelectric preconcentration (NPP). The NPP, serving as a sample preparation tool, enriched the virus concentration in samples prior to the subsequent LAMP assay. This enrichment enabled not only to achieve more sensitive assay but also to shorten the assay time for all tested clinical samples by ∼10 min compared to the conventional LAMP. The shortened assay time suppresses the occurrence of nonspecific amplification by not providing the necessary incubation time, effectively suppressing misidentification by false positives. Utilizing this technique, we also developed a prototype of the POC NPP-LAMP kit. This kit offers a streamlined diagnostic process for nontrained individuals, from the sample enrichment, transfer of the enriched sample to LAMP assays, which facilitates on-site/on-demand diagnosis of SARS-CoV-2. This development holds the potential to contribute toward preventing not only the current outbreak but also future occurrences of pandemic viruses.

COVID-19 Virus Structural Details: Optical and Electrochemical Detection

The increasing viral species have ruined people's health and the world's economy. Therefore, it is urgent to design bio-responsive materials to provide a vast platform for detecting a different family's passive or active virus. One can design a reactive functional unit for that moiety based on the particular bio-active moieties in viruses. Nanomaterials as optical and electrochemical biosensors have enabled better tools and devices to develop rapid virus detection. Various material science platforms are available for real-time monitoring and detecting COVID-19 and other viral loads. In this review, we discuss the recent advances of nanomaterials in developing the tools for optical and electrochemical sensing COVID-19. In addition, nanomaterials used to detect other human viruses have been studied, providing insights for developing COVID-19 sensing materials. The basic strategies for nanomaterials develop as virus sensors, fabrications, and detection performances are studied. Moreover, the new methods to enhance the virus sensing properties are discussed to provide a gateway for virus detection in variant forms. The study will provide systematic information and working of virus sensors. In addition, the deep discussion of structural properties and signal changes will offer a new gate for researchers to develop new virus sensors for clinical applications.

Advances and Challenges in SARS-CoV-2 Detection: A Review of Molecular and Serological Technologies

The urgent need for accurate COVID-19 diagnostics has led to the development of various SARS-CoV-2 detection technologies. Real-time reverse transcriptase polymerase chain reaction (RT-qPCR) remains a reliable viral gene detection technique, while other molecular methods, including nucleic acid amplification techniques (NAATs) and isothermal amplification techniques, provide diverse and effective approaches. Serological assays, detecting antibodies in response to viral infection, are crucial for disease surveillance. Saliva-based immunoassays show promise for surveillance purposes. The efficiency of SARS-CoV-2 antibody detection varies, with IgM indicating recent exposure and IgG offering prolonged detectability. Various rapid tests, including lateral-flow immunoassays, present opportunities for quick diagnosis, but their clinical significance requires validation through further studies. Challenges include variations in specificity and sensitivity among testing platforms and evolving assay sensitivities over time. SARS-CoV-2 antigens, particularly the N and S proteins, play a crucial role in diagnostic methods. Innovative approaches, such as nanozyme-based assays and specific nucleotide aptamers, offer enhanced sensitivity and flexibility. In conclusion, ongoing advancements in SARS-CoV-2 detection methods contribute to the global effort in combating the COVID-19 pandemic.

Research on accurate pipetting complementation model for high-throughput molecular detection platform

The incidence of infectious diseases has risen in recent years, leading to a significant surge in the demand for medical molecular detection. High-throughput molecular detection platforms play a crucial role in facilitating rapid and efficient molecular detection. Among the various techniques employed in high-throughput molecular detection, microliquid transfer stands out as one of the most frequently utilized methods. However, ensuring the accuracy of liquid transfer poses a challenge due to variations in the physical and chemical properties of different samples and reagents. In this study, a pipetting complementation model was developed specifically for the serum, paraffin oil, and throat swabs. The aim was to enhance the transfer accuracy of diverse liquids in the context of high-throughput molecular detection, ultimately ensuring detection reliability and stability. The experimental findings revealed notable improvements in pipetting accuracy after compensating for the three liquids. In particular, the pipetting error rates decreased by 52.5, 96, and 71.4% for serum, paraffin oil, and throat swabs, respectively. These results underscore the model's effectiveness in providing reliable support for the precise transfer of liquids on the high-throughput molecular detection platform.

Immunoglobulin A response to SARS-CoV-2 infection and immunity

The novel coronavirus disease (COVID-19) and its infamous "Variants" of the etiological agent termed Severe Acute Respiratory Syndrome Corona Virus 2 (SARS-CoV-2) has proven to be a global health concern. The three antibodies, IgA, IgM, and IgG, perform their dedicated role as main workhorses of the host adaptive immune system in virus neutralization. Immunoglobulin-A (IgA), also known as "Mucosal Immunoglobulin", has been under keen interest throughout the viral infection cycle. Its importance lies because IgA is predominant mucosal antibody and SARS family viruses primarily infect the mucosal surfaces of human respiratory tract. Therefore, IgA can be considered a diagnostic and prognostic marker and an active infection biomarker for SARS CoV-2 infection. Along with molecular analyses, serological tests, including IgA detection tests, are gaining ground in application as an early detectable marker and as a minimally invasive detection strategy. In the current review, it was emphasized the role of IgA response in diagnosis, host defense strategies, treatment, and prevention of SARS-CoV-2 infection. The data analysis was performed through almost 100 published peer-reviewed research reports and comprehended the importance of IgA in antiviral immunity against SARS-CoV-2 and other related respiratory viruses. Taken together, it is concluded that secretory IgA- Abs can serve as a promising detection tool for respiratory viral diagnosis and treatment parallel to IgG-based therapeutics and diagnostics. Vaccine candidates that target and trigger mucosal immune response may also be employed in future dimensions of research against other respiratory viruses.

CRISPR-Cas system: A promising tool for rapid detection of SARS-CoV-2 variants

COVID-19, caused by SARS-CoV-2, remains a global health crisis. The emergence of multiple variants with enhanced characteristics necessitates their detection and monitoring. Genome sequencing, the gold standard, faces implementation challenges due to complexity, cost, and limited throughput. The CRISPR-Cas system offers promising potential for rapid variant detection, with advantages such as speed, sensitivity, specificity, and programmability. This review provides an in-depth examination of the applications of CRISPR-Cas in mutation detection specifically for SARS-CoV-2. It begins by introducing SARS-CoV-2 and existing variant detection platforms. The principles of the CRISPR-Cas system are then clarified, followed by an exploration of three CRISPR-Cas-based mutation detection platforms, which are evaluated from different perspectives. The review discusses strategies for mutation site selection and the utilization of CRISPR-Cas, offering valuable insights for the development of mutation detection methods. Furthermore, a critical analysis of the clinical applications, advantages, disadvantages, challenges, and prospects of the CRISPR-Cas system is provided.

Target-triggered stochastic DNAzyme motors on spherical nucleic acids for simultaneous fluorescence assay of double miRNAs

Simultaneous quantifications of multiple miRNAs in the single-sampling system would be conducive to the accurate diagnosis of diseases in contrast with single miRNA analysis. In this work, a stochastic DNAzyme motor on spherical nucleic acids (SNAs) for simultaneous fluorescence assay of double miRNAs was established. Hairpin 1 (H1)-FAM-7a and H1-TAMRA-133a-functionalized magnetic beads (MBs) as SNAs were mixed. Targets (let-7a and miRNA-133a) reacted with two different S1 and S2, triggering the formation of two types of metal DNAzymes. The DNAzymes can further react with H1 stem-loop DNA on SNAs to release the two fluorescent DNA-FAM and DNA-TAMRA fragments in the presence of Mg2+. Meanwhile, the DNAzyme as DNA motors were separated from the previous H1 probe to participate the next cycling operations, resulting in the signal amplification toward the simultaneous and sensitive detection of let-7a and miRNA-133a. SNAs with three dimensional nanostructures provided enough space for the operation of DNAzyme walker, promoting the sensitivity of this proposed analytical system. The two mixed SNAs enable one-step and specific quantification of miRNA let-7a and miRNA-133a with lower detection limits of 90.5 fM and 74.9 fM, respectively. Finally, this proposed strategy was employed to simultaneously detect double miRNAs in practical applicability.

DNAzyme Nanomachine with Fluorogenic Substrate Delivery Function: Advancing Sensitivity in Nucleic Acid Detection

We have developed a hook-equipped DNA nanomachine (HDNM) for the rapid detection of specific nucleic acid sequences without a preamplification step. HDNM efficiently unwinds RNA structures and improves the detection sensitivity. Compared to the hookless system, HDNM offers an 80-fold and 13-fold enhancement in DNA and RNA detection, respectively, reducing incubation time from 3 to 1 h.

25 Years Responding to Respiratory and Other Viruses with Mass Spectrometry

This review article presents the development and application of mass spectrometry (MS) approaches, developed in the author's laboratory over the past 25 years, to detect; characterise, type and subtype; and distinguish major variants and subvariants of respiratory viruses such as influenza and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). All features make use of matrix-assisted laser desorption ionisation (MALDI) mass maps, recorded for individual viral proteins or whole virus digests. A MALDI-based immunoassay in which antibody-peptide complexes were preserved on conventional MALDI targets without their immobilisation led to an approach that enabled their indirect detection. The site of binding, and thus the molecular antigenicity of viruses, could be determined. The same approach was employed to study antivirals bound to their target viral protein, the nature of the binding residues, and relative binding affinities. The benefits of high-resolution MS were exploited to detect sequence-conserved signature peptides of unique mass within whole virus and single protein digests. These enabled viruses to be typed, subtyped, their lineage determined, and variants and subvariants to be distinguished. Their detection using selected ion monitoring improved analytical sensitivity limits to aid the identification of viruses in clinical specimens. The same high-resolution mass map data, for a wide range of viral strains, were input into a purpose-built algorithm (MassTree) in order to both chart and interrogate viral evolution. Without the need for gene or protein sequences, or any sequence alignment, this phylonumerics approach also determines and displays single-point mutations associated with viral protein evolution in a single-tree building step.

Variations in O-Glycosylation Patterns Influence Viral Pathogenicity, Infectivity, and Transmissibility in SARS-CoV-2 Variants

The highly glycosylated S protein plays a vital role in host cell invasion, making it the principal target for vaccine development. Differences in mutations observed on the spike (S) protein of SARS-CoV-2 variants may result in distinct glycosylation patterns, thus influencing immunological evasion, infectivity, and transmissibility. The glycans can mask key epitopes on the S1 protein and alter its structural conformation, allowing the virus to escape the immune system. Therefore, we comprehensively characterize O-glycosylation in eleven variants of SARS-CoV-2 S1 subunits to understand the differences observed in the biology of the variants. In-depth characterization was performed with a double digestion strategy and an efficient LC-MS/MS approach. We observed that O-glycosylation is highly conserved across all variants in the region between the NTD and RBD, whereas other domains and regions exhibit variation in O-glycosylation. Notably, omicron has the highest number of O-glycosylation sites on the S1 subunit. Also, omicron has the highest level of sialylation in the RBD and RBM functional motifs. Our findings may shed light on how differences in O-glycosylation impact viral pathogenicity in variants of SARS-CoV-2 and facilitate the development of a robust vaccine with high protective efficacy against the variants of concern.

Streamlined Specimen Purification for Rapid COVID-19 Diagnosis Using Positively Charged Polymer Thin Film-Coated Surfaces and Chamber Digital PCR

The ongoing coronavirus disease 2019 (COVID-19) pandemic demands rapid and straightforward diagnostic tools to prevent early-stage viral transmission. Although nasopharyngeal swabs are a widely used patient sample collection method for diagnosing COVID-19, using these samples for diagnosis without RNA extraction increases the risk of obtaining false-positive and -negative results. Thus, multiple purification steps are necessary, which are time-consuming, generate significant waste, and result in substantial sample loss. To address these issues, we developed surface-modified polymerase chain reaction (PCR) tubes using the tertiary aminated polymer poly(2-dimethylaminomethylstyrene) (pDMAMS) via initiated chemical vapor deposition. Introducing the clinical samples into the pDMAMS-coated tubes resulted in approximately 100% RNA capture efficiency within 25 min, which occurred through electrostatic interactions between the positively charged pDMAMS surface and the negatively charged RNA. The captured RNA is then detected via chamber digital PCR, enabling a sensitive, accurate, and rapid diagnosis. Our platform provides a simple and efficient RNA extraction and detection strategy that allows detection from 22 nasopharyngeal swabs and 21 saliva specimens with 0% false negatives. The proposed method can facilitate the diagnosis of COVID-19 and contribute to the prevention of early-stage transmission.

Micro- and nanosystems for the detection of hemorrhagic fever viruses

Hemorrhagic fever viruses (HFVs) are virulent pathogens that can cause severe and often fatal illnesses in humans. Timely and accurate detection of HFVs is critical for effective disease management and prevention. In recent years, micro- and nano-technologies have emerged as promising approaches for the detection of HFVs. This paper provides an overview of the current state-of-the-art systems for micro- and nano-scale approaches to detect HFVs. It covers various aspects of these technologies, including the principles behind their sensing assays, as well as the different types of diagnostic strategies that have been developed. This paper also explores future possibilities of employing micro- and nano-systems for the development of HFV diagnostic tools that meet the practical demands of clinical settings.

Single-molecule RNA capture-assisted droplet digital loop-mediated isothermal amplification for ultrasensitive and rapid detection of infectious pathogens

To minimize and control the transmission of infectious diseases, a sensitive, accurate, rapid, and robust assay strategy for application on-site screening is critical. Here, we report single-molecule RNA capture-assisted digital RT-LAMP (SCADL) for point-of-care testing of infectious diseases. Target RNA was captured and enriched by specific capture probes and oligonucleotide probes conjugated to magnetic beads, replacing laborious RNA extraction. Droplet generation, amplification, and the recording of results are all integrated on a microfluidic chip. In assaying commercial standard samples, quantitative results precisely corresponded to the actual concentration of samples. This method provides a limit of detection of 10 copies mL-1 for the N gene within 1 h, greatly reducing the need for skilled personnel and precision instruments. The ultrasensitivity, specificity, portability, rapidity and user-friendliness make SCADL a competitive candidate for the on-site screening of infectious diseases.

Development and Analytical Evaluation of a Point-of-Care Electrochemical Biosensor for Rapid and Accurate SARS-CoV-2 Detection

The COVID-19 pandemic has underscored the critical need for rapid and accurate screening and diagnostic methods for potential respiratory viruses. Existing COVID-19 diagnostic approaches face limitations either in terms of turnaround time or accuracy. In this study, we present an electrochemical biosensor that offers nearly instantaneous and precise SARS-CoV-2 detection, suitable for point-of-care and environmental monitoring applications. The biosensor employs a stapled hACE-2 N-terminal alpha helix peptide to functionalize an in situ grown polypyrrole conductive polymer on a nitrocellulose membrane backbone through a chemical process. We assessed the biosensor's analytical performance using heat-inactivated omicron and delta variants of the SARS-CoV-2 virus in artificial saliva (AS) and nasal swab (NS) samples diluted in a strong ionic solution, as well as clinical specimens with known Ct values. Virus identification was achieved through electrochemical impedance spectroscopy (EIS) and frequency analyses. The assay demonstrated a limit of detection (LoD) of 40 TCID50/mL, with 95% sensitivity and 100% specificity. Notably, the biosensor exhibited no cross-reactivity when tested against the influenza virus. The entire testing process using the biosensor takes less than a minute. In summary, our biosensor exhibits promising potential in the battle against pandemic respiratory viruses, offering a platform for the development of rapid, compact, portable, and point-of-care devices capable of multiplexing various viruses. The biosensor has the capacity to significantly bolster our readiness and response to future viral outbreaks.

Uncovering Molecular Quencher Effects on FRET Phenomena in Microsphere-Immobilized Probe Systems

Double-stranded (ds) oligonucleotide probes composed of quencher-dye sequence pairs outperform analogous single-stranded (ss) probes due to their superior target sequence specificity without any prerequisite target labeling. Optimizing sequence combinations for dsprobe design requires promoting a fast, accurate response to a specific target sequence while minimizing spontaneous dsprobe dissociation events. Here, flow cytometry is used to rapidly interrogate the stability and selective responsiveness of 20 candidate LNA and DNA dsprobes to a 24 base-long segment of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA and ∼243 degenerate RNA sequences serving as model variants. Importantly, in contrast to quantifying binding events of dye-labeled targets via flow cytometry, the current work employs the Förster resonance energy transfer (FRET)-based detection of unlabeled RNA targets. One DNA dsprobe with a 15-base-long hybridization partner containing a central abasic site emerged as very stable yet responsive only to the SARS-CoV-2 RNA segment. Separate displacement experiments, however, indicated that ∼12% of these quencher-capped hybridization partners remain bound, even in the presence of an excess SARS-CoV-2 RNA target. To examine their quenching range, additional titration studies varied the ratios and spatial placement of nonquencher and quencher-capped hybridization partners in the dsprobes. These titration studies indicate that these residual, bound quencher-capped partners, even at low percentages, act as nodes, enabling both static quenching effects within each residual dsprobe as well as longer-range quenching effects on neighboring FAM moieties. Overall, these studies provide insight into practical implications for rapid dsprobe screening and target detection by combining flow cytometry with FRET-based detection.

Diagnosing COVID-19 in nasopharyngeal secretion through Raman spectroscopy: a feasibility study

Since the beginning of the COVID-19 pandemic, the scientific community has sought to develop fast and accurate techniques for detecting the SARS-CoV-2 virus. Raman spectroscopy is a promising technique for diagnosing COVID-19 through serum samples. In the present study, the diagnosis of COVID-19 through nasopharyngeal secretion has been proposed. Raman spectra from nasopharyngeal secretion samples (15 Control, negative and 12 COVID-19, positive, assayed by immunofluorescence antigen test) were obtained in triplicate in a dispersive Raman spectrometer (830 nm, 350 mW), accounting for a total of 80 spectra. Using principal component analysis (PCA) the main spectral differences between the Control and COVID-19 samples were attributed to N and S proteins from the virus in the COVID-19 group. Features assigned to mucin (serine, threonine and proline amino acids) were observed in the Control group. A binary model based on partial least squares discriminant analysis (PLS-DA) differentiated COVID-19 versus Control samples with accuracy of 91%, sensitivity of 80% and specificity of 100%. Raman spectroscopy has a great potential for becoming a technique of choice for rapid and label-free evaluation of nasopharyngeal secretion for COVID-19 diagnosis.

High resolution mass spectrometry of respiratory viruses: beyond MALDI-ToF instruments for next generation viral typing, subtyping, variant and sub-variant identification

In the wake of the SARS-CoV2 pandemic, a point has been reached to assess the limitations and strengths of the analytical responses to virus identification and characterisation. Mass spectrometry has played a growing role in this area for over two decades, and this review highlights the benefits of mass spectrometry (MS) over PCR-based methods together with advantages of high mass resolution, high mass accuracy strategies over conventional MALDI-ToF and ESI-MS/MS instrumentation. This review presents the development and application of high resolution mass spectrometry approaches to detect, characterise, type and subtype, and distinguish variants of the influenza and SARS-CoV-2 respiratory viruses. The detection limits for the identification of SARS-CoV2 virus variants in clinical specimens and the future uptake of high resolution instruments in clinical laboratories are discussed. The same high resolution mass data can be used to monitor viral evolution and follow evolutionary trajectories.

MASTR Pouch: Palm-size lab for point-of-care detection of Mpox using recombinase polymerase amplification and CRISPR technology

Mpox (formerly referred as Monkeypox) outbreak has been declared a Public Health Emergency of International Concern. However, traditional polymerase chain reaction (PCR) diagnostic technology is not ideal for on-site applications. To conduct the sample-to-result Mpox viral particles detection outside the laboratories, we developed an easy-to-operate palm-size pouch, termed Mpox At-home Self-Test and point-of-caRe Pouch (MASTR Pouch). In this MASTR Pouch, the fast and accurate visualization was achieved by incorporating recombinase polymerase amplification (RPA) with clustered regularly interspaced short palindromic repeat (CRISPR)/Cas12a system. From viral particle lysis to naked eye readout, MASTR Pouch required only four simple steps to accomplish the analysis process within 35 min. Fifty-three Mpox pseudo-viral particles in exudate (10.6 particles/μL) were able to be detected. To verify the practicability, 104 mock Mpox clinical exudate specimens were tested. The clinical sensitivities were determined to be 91.7%- 95.8%. There was no false-positive result, validating the 100% clinical specificity. MASTR Pouch approaches the WHO's ASSURD criteria for point-of-care diagnostic, which will be beneficial for mitigating Mpox's global spread. The versatility potential of MASTR Pouch could further revolutionize infection diagnosis.

A lightweight CORONA-NET for COVID-19 detection in X-ray images

Since December 2019, COVID-19 has posed the most serious threat to living beings. With the advancement of vaccination programs around the globe, the need to quickly diagnose COVID-19 in general with little logistics is fore important. As a consequence, the fastest diagnostic option to stop COVID-19 from spreading, especially among senior patients, should be the development of an automated detection system. This study aims to provide a lightweight deep learning method that incorporates a convolutional neural network (CNN), discrete wavelet transform (DWT), and a long short-term memory (LSTM), called CORONA-NET for diagnosing COVID-19 from chest X-ray images. In this system, deep feature extraction is performed by CNN, the feature vector is reduced yet strengthened by DWT, and the extracted feature is detected by LSTM for prediction. The dataset included 3000 X-rays, 1000 of which were COVID-19 obtained locally. Within minutes of the test, the proposed test platform's prototype can accurately detect COVID-19 patients. The proposed method achieves state-of-the-art performance in comparison with the existing deep learning methods. We hope that the suggested method will hasten clinical diagnosis and may be used for patients in remote areas where clinical labs are not easily accessible due to a lack of resources, location, or other factors.

Entropy-driven DNA circuit with two-stage strand displacement for elegant and robust detection of miRNA let-7a

MicroRNAs (miRNAs) research in cancer diagnosis is expanding, on account of miRNAs were demonstrated to be key indicator of gene expression and hopeful candidates for biomarkers. In this study, a stable miRNA-let-7a fluorescent biosensor was successfully designed based on an exonuclease Ⅲ-assisted two-stage strand displacement reaction (SDR). First, an entropy-driven SDR containing a three-chain structure of the substrate is used in our designed biosensor, leading to reduce the reversibility of the target recycling process in each step. The target acts on the first stage to start the entropy-driven SDR, which generates the trigger used to stimulate the exonuclease Ⅲ-assisted SDR in the second stage. At the same time, we design a SDR one-step amplification strategy as a comparison. Expectly, this developed two-stage strand displacement system has a low detection limit of 25.0 pM as well as a broad detection range of 4 orders of magnitude, making it more sensitive than the SDR one-step sensor, whose detection limit is 0.8 nM. In addition, this sensor has high specificity across members of the miRNA family. Therefore, we can take advantage of this biosensor to promote miRNA research in cancer diagnosis sensing systems.

Reverse transcription loop‑mediated isothermal amplification has a high performance in the detection of SARS‑CoV‑2 in saliva samples and nasal swabs from asymptomatic and symptomatic individuals

The detection of coronavirus disease 2019 cases represents a significant challenge at the epidemiological level. Limitations exist in effectively detecting asymptomatic cases, achieving good follow-up in hospitals without the infrastructure for reverse transcription-quantitative PCR (RT-qPCR) or in difficult-to-access areas and developing methods with the need for less invasive sampling procedures. Therefore, the present study evaluated the performance of the direct reverse transcription loop-mediated isothermal amplification (RT-LAMP) test for detecting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in the saliva and nasal samples of asymptomatic individuals belonging to the university population. In addition, this test was also assessed for effectiveness in symptomatic individuals referred from a hospital with poor infrastructure in molecular biology and located outside the urban area. The RT-LAMP assay was compared with the results obtained from the RT-qPCR nasopharyngeal swab test, where the diagnosis was confirmed by lateral flow immunoassay test for rapid antigen detection. A total of 128 samples were analyzed, of which 43% were symptomatic positive individuals, 25% were asymptomatic positive individuals and 32% were SARS-CoV2-negative control individuals. Among positive individuals, no differences were found between the Cq values determined by RT-qPCR. A sensitivity of 96.5% and a specificity of 97.6% was reported for the detection of SARS-CoV-2 in symptomatic individuals by salivary and nasal RT-LAMP, as well as a sensitivity of 100% and a specificity of 97.6% for the detection of SARS-CoV-2 in asymptomatic individuals. These findings indicated that performance of the direct RT-LAMP test using saliva and nasal samples has high sensitivity and specificity, which in turn suggest that it is a viable and reliable alternative for use in epidemiological monitoring.

SARS-CoV-2 in the environment: Contamination routes, detection methods, persistence and removal in wastewater treatment plants

The present study reviewed the occurrence of SARS-CoV-2 RNA and the evaluation of virus infectivity in feces and environmental matrices. The detection of SARS-CoV-2 RNA in feces and wastewater samples, reported in several studies, has generated interest and concern regarding the possible fecal-oral route of SARS-CoV-2 transmission. To date, the presence of viable SARS-CoV-2 in feces of COVID-19 infected people is not clearly confirmed although its isolation from feces of six different patients. Further, there is no documented evidence on the infectivity of SARS-CoV-2 in wastewater, sludge and environmental water samples, although the viral genome has been detected in these matrices. Decay data revealed that SARS-CoV-2 RNA persisted longer than infectious particle in all aquatic environment, indicating that genome quantification of SARS-CoV-2 does not imply the presence of infective viral particles. In addition, this review also outlined the fate of SARS-CoV-2 RNA during the different steps in the wastewater treatment plant and focusing on the virus elimination along the sludge treatment line. Studies showed complete removal of SARS-CoV-2 during the tertiary treatment. Moreover, thermophilic sludge treatments present high efficiency in SARS-CoV-2 inactivation. Further studies are required to provide more evidence with respect to the inactivation behavior of infectious SARS-CoV-2 in different environmental matrices and to examine factors affecting SARS-CoV-2 persistence.

Gold nanostructures modified carbon-based electrode enhanced with methylene blue for point-of-care COVID-19 tests using isothermal amplification

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) envelope (E) and RNA-dependent RNA polymerase (RdRP) genes were detected via electrochemical measurements using a screen-printed carbon electrode (SPCE) (3-electrode system) coupled with a battery-operated thin-film heater based on the loop-mediated isothermal amplification (LAMP) technique. The working electrodes of the SPCE sensor were decorated with synthesized gold nanostars (AuNSs) to obtain a large surface area and improve sensitivity. The LAMP assay was enhanced using a real-time amplification reaction system to detect the optimal target genes (E and RdRP) of SARS-CoV-2. The optimized LAMP assay was performed with diluted concentrations (from 0 to 10⁹ copies) of the target DNA using 30 μM of methylene blue as a redox indicator. Target DNA amplification was conducted for 30 min at a constant temperature using a thin-film heater, and the final amplicon electrical signals were detected based on cyclic voltammetry curves. Our electrochemical LAMP analysis of SARS-CoV-2 clinical samples showed an excellent correlation with the Ct value of real-time reverse transcriptase-polymerase chain reaction, indicating successful validation of results. A linear relationship between the peak current response and the amplified DNA was observed for both genes. The AuNS-decorated SPCE sensor with the optimized LAMP primer enabled accurate analysis of both SARS-CoV-2-positive and -negative clinical samples. Therefore, the developed device is suitable for use as a point-of-care test DNA-based sensor for the diagnosis of SARS-CoV-2.

Recent Trends in Lateral Flow Immunoassays with Optical Nanoparticles

Rapid, accurate, and convenient diagnosis is essential for effective disease management. Various detection methods, such as enzyme-linked immunosorbent assay, have been extensively used, with lateral flow immunoassay (LFIA) recently emerging as a major diagnostic tool. Nanoparticles (NPs) with characteristic optical properties are used as probes for LFIA, and researchers have presented various types of optical NPs with modified optical properties. Herein, we review the literature on LFIA with optical NPs for the detection of specific targets in the context of diagnostics.

Polyaniline-based 3D network structure promotes entrapment and detection of drug-resistant bacteria

Sensitive and accurate capture, enrichment, and identification of drug-resistant bacteria on human skin are important for early-stage diagnosis and treatment of patients. Herein, we constructed a three-dimensional hierarchically structured polyaniline nanoweb (3D HPN) to capture, enrich, and detect drug-resistant bacteria on-site by rubbing infected skins. These unique hierarchical nanostructures enhance bacteria capture efficiency and help severely deform the surface of the bacteria entrapped on them. Therefore, 3D HPN significantly contributes to the effective and reliable recovery of drug-resistant bacteria from the infected skin and the prevention of potential secondary infection. The recovered bacteria were successfully identified by subsequent real-time polymerase chain reaction (PCR) analysis after the lysis process. The molecular analysis results based on a real-time PCR exhibit excellent sensitivity to detecting target bacteria of concentrations ranging from 102 to 107 CFU/mL without any fluorescent signal interruption. To confirm the field applicability of 3D HPN, it was tested with a drug-resistant model consisting of micropig skin similar to human skin and Klebsiella pneumoniae carbapenemase-producing carbapenem-resistant Enterobacteriaceae (KPC-CRE). The results show that the detection sensitivity of this assay is 102 CFU/mL. Therefore, 3D HPN can be extended to on-site pathogen detection systems, along with rapid molecular diagnostics through a simple method, to recover KPC-CRE from the skin.

A DNA biosensors-based microfluidic platform for attomolar real-time detection of unamplified SARS-CoV-2 virus

The emergence of the coronavirus 2019 (COVID-19) arose the need for rapid, accurate and massive virus detection methods to control the spread of infectious diseases. In this work, a device, deployable in non-medical environments, has been developed for the detection of non-amplified SARS-CoV-2 RNA. A SARS-CoV-2 specific probe was designed and covalently immobilized at the surface of glass slides to fabricate a DNA biosensor. The resulting system was integrated in a microfluidic platform, in which viral RNA was extracted from non-treated human saliva, before hybridizing at the surface of the sensor. The formed DNA/RNA duplex was detected in presence of SYBR Green I using an opto-electronic system, based on a high-power LED and a photo multiplier tube, which convert the emitted fluorescence into an electrical signal that can be processed in less than 10 min. The limit of detection of the resulting microfluidic platform reached six copies of viral RNA per microliter of sample (equal to 10 aM) and satisfied the safety margin. The absence of non-specific adsorption and the selectivity for SARS-CoV-2 RNA were established. In addition, the designed device could be applicable for the detection of a variety of viruses by simple modification of the immobilized probe.

Emerging trends in point-of-care biosensing strategies for molecular architectures and antibodies of SARS-CoV-2

COVID-19, a highly contagious viral infection caused by the occurrence of severe acute respiratory syndrome coronavirus (SARS-CoV-2), has turned out to be a viral pandemic then ravaged many countries worldwide. In the recent years, point-of-care (POC) biosensors combined with state-of-the-art bioreceptors, and transducing systems enabled the development of novel diagnostic tools for rapid and reliable detection of biomarkers associated with SARS-CoV-2. The present review thoroughly summarises and discusses various biosensing strategies developed for probing SARS-CoV-2 molecular architectures (viral genome, S Protein, M protein, E protein, N protein and non-structural proteins) and antibodies as a potential diagnostic tool for COVID-19. This review discusses the various structural components of SARS-CoV-2, their binding regions and the bioreceptors used for recognizing the structural components. The various types of clinical specimens investigated for rapid and POC detection of SARS-CoV-2 is also highlighted. The importance of nanotechnology and artificial intelligence (AI) approaches in improving the biosensor performance for real-time and reagent-free monitoring the biomarkers of SARS-CoV-2 is also summarized. This review also encompasses existing practical challenges and prospects for developing new POC biosensors for clinical monitoring of COVID-19.

The relevant information about the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) using the five-question approach (when, where, what, why, and how) and its impact on the environment

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is regarded as a threat because it spreads quickly across the world without requiring a passport or establishing an identity. This tiny virus has wreaked havoc on people's lives, killed people, and created psychological problems all over the world. The viral spike protein (S) significantly contributes to host cell entry, and mutations associated with it, particularly in the receptor-binding protein (RBD), either facilitate the escape of virus from neutralizing antibodies or enhance its transmission by increasing the affinity for cell entry receptor, angiotensin-converting enzyme 2 (ACE2). The initial variants identified in Brazil, South Africa, and the UK have spread to various countries. On the other hand, new variants are being detected in India and the USA. The viral genome and proteome were applied for molecular detection techniques, and nanotechnology particles and materials were utilized in protection and prevention strategies. Consequently, the SARS-CoV-2 pandemic has resulted in extraordinary scientific community efforts to develop detection methods, diagnosis tools, and effective antiviral drugs and vaccines, where prevailing academic, governmental, and industrial institutions and organizations continue to engage themselves in large-scale screening of existing drugs, both in vitro and in vivo. In addition, COVID-19 pointed on the possible solutions for the environmental pollution globe problem. Therefore, this review aims to address SARS-CoV-2, its transmission, where it can be found, why it is severe in some people, how it can be stopped, its diagnosis and detection techniques, and its relationship with the environment.

Water-soluble polythiophene-based colorimetry for the quick and accurate detection of SARS-CoV-2 RNA

The SARS-CoV-2-related Corona Virus Disease 2019 (COVID-19) epidemic has had a significant negative impact on society and endangered global health. To quickly stop and constrain the pandemic, a SARS-CoV-2 detection technology that is sensitive, quick and reasonably priced is urgently required. The widely used reverse-transcription polymerase chain reaction (RT-PCR) requires complex equipment and a fair amount of time. Reverse transcription-loop-mediated isothermal amplification (RT-LAMP) exhibits significant advantage for early detection of COVID-19 without the requirement for expensive equipment by amplifying a little amount of RNA to a detectable level at isothermal condition. Here, a water-soluble polythiophene-based colorimetric method by combining with RT-LAMP is established for fast and sensitive detection of SARS-CoV-2 RNA. The proposed assay has benefits for the quick detection of SARS-CoV-2 RNA at concentrations as low as 10 aM, or 6 copies/μL.

Automated Microfluidic Nucleic Acid Detection Platform-Integrated RPA-T7-Cas13a for Pathogen Diagnosis

There is a growing urgent need for point-of-care testing (POCT) devices that integrate sample pretreatment and nucleic acid detection in a rapid, economical, and non-labor-intensive way. Here, we have developed an automated, portable nucleic acid detection system employing microfluidic chips integrating rotary valve-assisted sample pretreatment and recombinase polymerase amplification (RPA)-T7-Cas13a into one-step nucleic acid detection. The RPA and clustered regularly interspaced short palindromic repeats (CRISPR)/Cas13a were integrated into a single-chamber reaction. As a validation model, we used this method to detect Group B streptococci (GBS) DNA and achieved a detection sensitivity of 8 copies/reaction, which is 6 times more sensitive than gold-standard polymerase chain reactions (PCRs). Dual specific recognition of RPA with CRISPR/Cas13a makes our method ultraspecific, with correct detection of Group B streptococci from 8 kinds of pathogenic bacteria. For the 16 positive and 24 negative clinical GBS samples, our assay achieved 100% accuracy compared to the PCR technique. The whole procedure can be automatically completed within 30 min, providing a more robust, sensitive, and accurate molecular diagnostic tool for POCT.

Development of nucleocapsid-specific monoclonal antibodies for SARS-CoV-2 and their ELISA diagnostics on an automatic microfluidic device

Coronavirus disease 2019 (COVID-19) pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection has threatened public health globally, and the emergence of viral variants has exacerbated an already precarious situation. To prevent further spread of the virus and determine government action required for virus control, accurate and rapid immunoassays for SARS-CoV-2 diagnosis are urgently needed. In this study, we generated monoclonal antibodies (mAbs) against the SARS-CoV-2 nucleocapsid protein (NP), compared their reactivity using an enzyme-linked immunosorbent assay (ELISA), and selected four mAbs designated 1G6, 3E10, 3F10, and 5B6 which have higher reactivity to NP and viral lysates of SARS-CoV-2 than other mAbs. Using an epitope mapping assay, we identified that 1G6 detected the C-terminal domain of SARS-CoV-2 NP (residues 248-364), while 3E10 and 3F10 bound to the N-terminal domain (residues 47-174) and 3F10 detected the N-arm region (residues 1-46) of SARS-CoV-2 NP. Based on the epitope study and sandwich ELISA, we selected the 1G6 and 3E10 Abs as an optimal Ab pair and applied them for a microfluidics-based point-of-care (POC) ELISA assay to detect the NPs of SARS-CoV-2 and its variants. The integrated and automatic microfluidic system could operate the serial injection of the sample, the washing solution, the HRP-conjugate antibody, and the TMB substrate solution simply by controlling air purge via a single syringe. The proposed Ab pair-equipped microsystem effectively detected the NPs of SARS-CoV-2 variants as well as in clinical samples. Collectively, our proposed platform provides an advanced protein-based diagnostic tool for detecting SARS-CoV-2.

CRISPR techniques and potential for the detection and discrimination of SARS-CoV-2 variants of concern

The continuing evolution of the SARS-CoV-2 virus has led to the emergence of many variants, including variants of concern (VOCs). CRISPR-Cas systems have been used to develop techniques for the detection of variants. These techniques have focused on the detection of variant-specific mutations in the spike protein gene of SARS-CoV-2. These sequences mostly carry single-nucleotide mutations and are difficult to differentiate using a single CRISPR-based assay. Here we discuss the specificity of the Cas9, Cas12, and Cas13 systems, important considerations of mutation sites, design of guide RNA, and recent progress in CRISPR-based assays for SARS-CoV-2 variants. Strategies for discriminating single-nucleotide mutations include optimizing the position of mismatches, modifying nucleotides in the guide RNA, and using two guide RNAs to recognize the specific mutation sequence and a conservative sequence. Further research is needed to confront challenges in the detection and differentiation of variants and sublineages of SARS-CoV-2 in clinical diagnostic and point-of-care applications.

Molecular test for COVID-19 diagnosis based on a colorimetric genomagnetic assay

The world is in a long pandemic period caused by the SARS-CoV-2 virus and massive diagnostic tests to assist efforts to control the spread of the disease and also to avoid new coronavirus variants are still needed. Herein, we propose a simple and accurate saliva-based colorimetric test for the diagnosis of COVID-19. Magnetic beads (MBs) modified with a sequence of single-strand DNA (ssDNA) complementary to the N gene of the SARS-CoV-2 RNA were developed and used for magnetic capture and separation from a complex saliva sample. A second biotinylated ssDNA sequence was applied, and the colorimetric detection was carried out by adding streptavidin-horseradish peroxidase conjugate, H₂O_2, and tetramethylbenzidine (TMB) as chromogenic substrate. The test does not require viral RNA isolation, transcription, or amplification steps and can be performed at room temperature. The molecular assay test can be run using 96-well microplates, allowing the diagnosis of a large number of samples in 90 min. A simple support for magnets was designed and constructed using a 3D printer that allows the magnetic separations directly in the 96-well microplate. The colorimetric test showed an excellent ability to discriminate between healthy individuals and patients infected with SARS-CoV-2, with 92% and 100% of clinical sensitivity and specificity, respectively. This performance was similar to that achieved using the gold standard RT-PCR technique. The proposed genomagnetic assay offers an opportunity to greatly increase population testing, contribute to controlling the spread of the virus, and improve health equity in testing for COVID-19.

Radu E, Matei L, Maria Ruta S, Bleotu C. SARS-CoV-2 Variant Surveillance in Genomic Medicine Era

In the genomic medicine era, the emergence of SARS-CoV-2 was immediately followed by viral genome sequencing and world-wide sequences sharing. Almost in real-time, based on these sequences, resources were developed and applied around the world, such as molecular diagnostic tests, informed public health decisions, and vaccines. Molecular SARS-CoV-2 variant surveillance was a normal approach in this context yet, considering that the viral genome modification occurs commonly in viral replication process, the challenge is to identify the modifications that significantly affect virulence, transmissibility, reduced effectiveness of vaccines and therapeutics or failure of diagnostic tests. However, assessing the importance of the emergence of new mutations and linking them to epidemiological trend, is still a laborious process and faster phenotypic evaluation approaches, in conjunction with genomic data, are required in order to release timely and efficient control measures.

AutoPLP: A Padlock Probe Design Pipeline for Zoonotic Pathogens

Emergence of novel zoonotic infections among the human population has increased the burden on global healthcare systems to curb their spread. To meet the evolutionary agility of pathogens, it is essential to revamp the existing diagnostic methods for early detection and characterization of the pathogens at the molecular level. Padlock probes (PLPs), which can leverage the power of isothermal nucleic acid amplification techniques (NAAT) such as rolling circle amplification (RCA), are known for their high sensitivity and specificity in detecting a diverse pathogen panel of interest. However, due to the complexity involved in deciding the target regions for PLP design and the need for optimization of multiple experimental parameters, the applicability of RCA has been limited in point-of-care testing for pathogen detection. To address this gap, we have developed a novel and integrated PLP design pipeline named AutoPLP, which can automate the probe design process for a diverse pathogen panel of interest. The pipeline is composed of three modules which can perform sequence data curation, multiple sequence alignment, conservation analysis, filtration based on experimental parameters (T_m, GC content, and secondary structure formation), and in silico probe validation via potential cross-hybridization check with host genome. The modules can also take into account the backbone and restriction site information, appropriate combinations of which are incorporated along with the probe arms to design a complete probe sequence. The potential applications of AutoPLP are showcased through the design of PLPs for the detection of rabies virus and drug-resistant strains of Mycobacterium tuberculosis.