Dual Raman-Brillouin Microscope for Chemical and Mechanical Characterization and Imaging

Effect of polymerization on free water in polyacrylamide hydrogels observed with Brillouin spectroscopy

Brillouin spectroscopy is used to determine the effects of polymer concentration, crosslinking density, and polymerization on the longitudinal storage and loss moduli of polyacrylamide hydrogels. The model established by Chiarelli et al. is implemented to calculate the speed of sound in the free water [Chiarelli et al., The Journal of the Acoustical Society of America, 2010, 127(3), 1197-1207]. The polymer concentration has the greatest effect on the moduli of the polymer matrix. We determined that the crosslink density has no measurable effect on the logitudinal storage or loss modulus of polyacrylamide hydrogels when measurements are made at GHz frequencies, in contrast to measurements made at kHz frequencies as documented by other studies. However, the moduli are independent of monomer concentration if the acrylamide is not polymerized. We show at the GHz frequency that the incorporation of acrylamide polymer chains affects the mechanical properties of the free water. The speed of sound in the free water is reduced by the introduction of polymerized acrylamide. The long polymer chains and their interactions with the bounded water disrupt the bonding organization of the unbound water, causing a reduction of the average hydrogen bond strength between free water molecules. This results in a decreased speed of sound in the free water and an increase in the longitudinal storage modulus of the hydrogel.

Optical coherence tomography-guided Brillouin microscopy highlights regional tissue stiffness differences during anterior neural tube closure in the Mthfd1l murine mutant

Neurulation is a highly synchronized biomechanical process leading to the formation of the brain and spinal cord, and its failure leads to neural tube defects (NTDs). Although we are rapidly learning the genetic mechanisms underlying NTDs, the biomechanical aspects are largely unknown. To understand the correlation between NTDs and tissue stiffness during neural tube closure (NTC), we imaged an NTD murine model using optical coherence tomography (OCT), Brillouin microscopy and confocal fluorescence microscopy. Here, we associate structural information from OCT with local stiffness from the Brillouin signal of embryos undergoing neurulation. The stiffness of neuroepithelial tissues in Mthfd1l null embryos was significantly lower than that of wild-type embryos. Additionally, exogenous formate supplementation improved tissue stiffness and gross embryonic morphology in nullizygous and heterozygous embryos. Our results demonstrate the significance of proper tissue stiffness in normal NTC and pave the way for future studies on the mechanobiology of normal and abnormal embryonic development.

Brillouin microscopy monitors rapid responses in subcellular compartments

Measurements and imaging of the mechanical response of biological cells are critical for understanding the mechanisms of many diseases, and for fundamental studies of energy, signal and force transduction. The recent emergence of Brillouin microscopy as a powerful non-contact, label-free way to non-invasively and non-destructively assess local viscoelastic properties provides an opportunity to expand the scope of biomechanical research to the sub-cellular level. Brillouin spectroscopy has recently been validated through static measurements of cell viscoelastic properties, however, fast (sub-second) measurements of sub-cellular cytomechanical changes have yet to be reported. In this report, we utilize a custom multimodal spectroscopy system to monitor for the very first time the rapid viscoelastic response of cells and subcellular structures to a short-duration electrical impulse. The cytomechanical response of three subcellular structures - cytoplasm, nucleoplasm, and nucleoli - were monitored, showing distinct mechanical changes despite an identical stimulus. Through this pioneering transformative study, we demonstrate the capability of Brillouin spectroscopy to measure rapid, real-time biomechanical changes within distinct subcellular compartments. Our results support the promising future of Brillouin spectroscopy within the broad scope of cellular biomechanics.

Cell wall dynamics: novel tools and research questions

Years ago, a classic textbook would define plant cell walls based on passive features. For instance, a sort of plant exoskeleton of invariable polysaccharide composition, and probably painted in green. However, currently, this view has been expanded to consider plant cell walls as active, heterogeneous, and dynamic structures with a high degree of complexity. However, what do we mean when we refer to a cell wall as a dynamic structure? How can we investigate the different implications of this dynamism? While the first question has been the subject of several recent publications, defining the ideal strategies and tools needed to address the second question has proven to be challenging due to the myriad of techniques available. In this review, we will describe the capacities of several methodologies to study cell wall composition, structure, and other aspects developed or optimized in recent years. Keeping in mind cell wall dynamism and plasticity, the advantages of performing long-term non-invasive live-imaging methods will be emphasized. We specifically focus on techniques developed for Arabidopsis thaliana primary cell walls, but the techniques could be applied to both secondary cell walls and other plant species. We believe this toolset will help researchers in expanding knowledge of these dynamic/evolving structures.

Varying the Stiffness and Diffusivity of Rod-Shaped Microgels Independently through Their Molecular Building Blocks

Microgels are water-swollen, crosslinked polymers that are widely used as colloidal building blocks in scaffold materials for tissue engineering and regenerative medicine. Microgels can be controlled in their stiffness, degree of swelling, and mesh size depending on their polymer architecture, crosslink density, and fabrication method-all of which influence their function and interaction with the environment. Currently, there is a lack of understanding of how the polymer composition influences the internal structure of soft microgels and how this morphology affects specific biomedical applications. In this report, we systematically vary the architecture and molar mass of polyethylene glycol-acrylate (PEG-Ac) precursors, as well as their concentration and combination, to gain insight in the different parameters that affect the internal structure of rod-shaped microgels. We characterize the mechanical properties and diffusivity, as well as the conversion of acrylate groups during photopolymerization, in both bulk hydrogels and microgels produced from the PEG-Ac precursors. Furthermore, we investigate cell-microgel interaction, and we observe improved cell spreading on microgels with more accessible RGD peptide and with a stiffness in a range of 20 kPa to 50 kPa lead to better cell growth.

Uncertainty Estimation for the Brillouin Frequency Shift Measurement Using a Scanning Tandem Fabry-Pérot Interferometer

The expanded uncertainty of the measured Brillouin scattering shift frequencies is essential in assessing the measurements of parameters of various materials. We describe the general operation principles of a Brillouin light scattering (BLS) spectrometer with a high-power laser and a scanning tandem Fabry-Pérot interferometer (TFPI) for material characterization. Various uncertainty components have been analyzed for the BLS spectrometer following the Guide to the Expression of Uncertainty in Measurement (GUM). The expanded relative uncertainty in the measured Brillouin frequency shift of 15.70 GHz for polymethyl methacrylate (PMMA) was estimated to be 0.26%. The calculated Brillouin frequency shift (based on material properties of PMMA) was determined to be 15.44 GHz with expanded relative uncertainty of 2.13%. It was shown that the measured and calculated Brillouin frequency shifts for PMMA agree within their expanded uncertainties. The TFPI-based BLS spectrometer can be used to measure the longitudinal modulus of materials with an expanded uncertainty of 1.9%, which is smaller than that of the ultrasonic velocity-based method (estimated to be 2.9%).

High-Dose Photodynamic Therapy Increases Tau Protein Signals in Drosophila

Amyloid-Detection and imaging of amyloid-β plaques (Aβ) has been a focus in the field of neurodegeneration (ND) due to the high correlation with Parkinson's and Alzheimer's diseases. Here, a novel approach is being proposed and developed to induce and assess those diseases. Photodynamic therapy (PDT) is applied to the fruit fly Drosophila melanogaster as a model of systemic oxidative stress to induce rapid Aβ accumulation. Excised brains are evaluated by Brillouin-Raman spectroscopy and microscopy with UV surface emissions (MUSE) to interrogate physical property changes due to fixation and high-dose PDT. MUSE reveals reasonable autofluorescence in the spectral range of Aβ, particularly for females, with increased signal once stained. A presence of significant mechanical changes in fresh brains treated with PDT compared to healthy controls is revealed using Brillouin spectroscopy. Aβ plaque presence was confirmed with confocal analysis, with female PDT flies yielding nearly four-fold the mean intensity of controls, thus marking PDT as a potential neurodegenerative disease model. MUSE may serve as a viable early screening method for Aβ presence and quantification in a research setting. This reduces the time for sample preparation and drastically decreases the cost of Aβ quantification.

Size and environment: The effect of phonon localization on micro-Brillouin imaging

Specifically designed samples have been analyzed to test the ability of Brillouin spectroscopy to provide reliable mechanical characterization of micro and nano-objects. The selected samples are polymeric films, whose transversal sizes from hundreds of nano- to some micro-meters cover the entire range of length-scales relevant in Brillouin scattering process. The experimental data highlight how, the size of the extended collective oscillation (acoustic phonons, in brief) is the lowest spatial resolution reachable in Brillouin mechanical characterization. Conversely, in the limit condition of phonon confinement, the technique provides the mechanical properties of nano-objects whose characteristic size is comparable with the phonon wavelength (⁓300 nm). Investigating acoustically heterogeneous materials, both size of heterogeneity and acoustic mismatch between adjacent regions are shown to be relevant in shaping the Brillouin response. In particular, a transition from a confined to a non-confined condition is obtained modulating the acoustic mismatch between the micro-objects and their local environment. The provided results and the derived analytic models for the data analysis will guide the interpretation of Brillouin spectra acquired in complex nano-structured samples such as cells, tissues or biomimetic materials. Our analysis can therefore generate new insights to tackle fundamental problems in mechanobiology or to characterize new bioengineered materials.

Brillouin-Raman micro-spectroscopy and machine learning techniques to classify osteoarthritic lesions in the human articular cartilage

In this study, Brillouin and Raman micro-Spectroscopy (BRamS) and Machine Learning were used to set-up a new diagnostic tool for Osteoarthritis (OA), potentially extendible to other musculoskeletal diseases. OA is a degenerative pathology, causing the onset of chronic pain due to cartilage disruption. Despite this, it is often diagnosed late and the radiological assessment during the routine examination may fail to recognize the threshold beyond which pharmacological treatment is no longer sufficient and prosthetic replacement is required. Here, femoral head resections of OA-affected patients were analyzed by BRamS, looking for distinctive mechanical and chemical markers of the progressive degeneration degree, and the result was compared to standard assignment via histological staining. The procedure was optimized for diagnostic prediction by using a machine learning algorithm and reducing the time required for measurements, paving the way for possible future in vivo characterization of the articular surface through endoscopic probes during arthroscopy.

Techniques for In Vivo Assessment of Corneal Biomechanics: Brillouin Spectroscopy and Hydration State - Quo Vadis?

To assess the structural integrity of the cornea, non-invasive methods are needed for the local measurement of its mechanical properties. Among a number of established techniques and their associated advantages and disadvantages, Brillouin spectroscopy is still a relatively new technique, capable of determining the compressive modulus of biological tissue, specifically the cornea, in vivo. In the present paper, these various existing and developing technologies for corneal biomechanics are discussed and correlated.

Comprehensive single-shot biophysical cytometry using simultaneous quantitative phase imaging and Brillouin spectroscopy

Single-cell analysis, or cytometry, is a ubiquitous tool in the biomedical sciences. Whereas most cytometers use fluorescent probes to ascertain the presence or absence of targeted molecules, biophysical parameters such as the cell density, refractive index, and viscosity are difficult to obtain. In this work, we combine two complementary techniques-quantitative phase imaging and Brillouin spectroscopy-into a label-free image cytometry platform capable of measuring more than a dozen biophysical properties of individual cells simultaneously. Using a geometric simplification linked to freshly plated cells, we can acquire the cellular diameter, volume, refractive index, mass density, non-aqueous mass, fluid volume, dry volume, the fractional water content of cells, both by mass and by volume, the Brillouin shift, Brillouin linewidth, longitudinal modulus, longitudinal viscosity, the loss modulus, and the loss tangent, all from a single acquisition, and with no assumptions of underlying parameters. Our methods are validated across three cell populations, including a control population of CHO-K1 cells, cells exposed to tubulin-disrupting nocodazole, and cells under hypoosmotic shock. Our system will unlock new avenues of research in biophysics, cell biology, and medicine.

Biomechanical Sensing Using Gas Bubbles Oscillations in Liquids and Adjacent Technologies: Theory and Practical Applications

Gas bubbles present in liquids underpin many natural phenomena and human-developed technologies that improve the quality of life. Since all living organisms are predominantly made of water, they may also contain bubbles-introduced both naturally and artificially-that can serve as biomechanical sensors operating in hard-to-reach places inside a living body and emitting signals that can be detected by common equipment used in ultrasound and photoacoustic imaging procedures. This kind of biosensor is the focus of the present article, where we critically review the emergent sensing technologies based on acoustically driven oscillations of bubbles in liquids and bodily fluids. This review is intended for a broad biosensing community and transdisciplinary researchers translating novel ideas from theory to experiment and then to practice. To this end, all discussions in this review are written in a language that is accessible to non-experts in specific fields of acoustics, fluid dynamics and acousto-optics.

Correlation of biomechanics and cancer cell phenotype by combined Brillouin and Raman spectroscopy of U87-MG glioblastoma cells

The elucidation of biomechanics furthers our understanding of brain tumour biology. Brillouin spectroscopy is a new optical method that addresses viscoelastic properties down to subcellular resolution in a contact-free manner. Moreover, it can be combined with Raman spectroscopy to obtain co-localized biochemical information. Here, we applied co-registered Brillouin and Raman spectroscopy to U87-MG human glioblastoma cells in vitro. Using two-dimensional and three-dimensional cultures, we related biomechanical properties to local biochemical composition at the subcellular level, as well as the cell phenotype. Brillouin and Raman mapping of adherent cells showed that the nucleus and nucleoli are stiffer than the perinuclear region and the cytoplasm. The biomechanics of the cell cytoplasm is affected by culturing conditions, i.e. cells grown as spheroids are stiffer than adherent cells. Inside the spheroids, the presence of lipid droplets as assessed by Raman spectroscopy revealed higher Brillouin shifts that are not related to a local increase in stiffness, but are due to a higher refractive index combined with a lower mass density. This highlights the importance of locally defined biochemical reference data for a correct interpretation of the Brillouin shift of cells and tissues in future studies investigating the biomechanics of brain tumour models by Brillouin spectroscopy.

Acoustic, Phononic, Brillouin Light Scattering and Faraday Wave-Based Frequency Combs: Physical Foundations and Applications

Frequency combs (FCs)-spectra containing equidistant coherent peaks-have enabled researchers and engineers to measure the frequencies of complex signals with high precision, thereby revolutionising the areas of sensing, metrology and communications and also benefiting the fundamental science. Although mostly optical FCs have found widespread applications thus far, in general FCs can be generated using waves other than light. Here, we review and summarise recent achievements in the emergent field of acoustic frequency combs (AFCs), including phononic FCs and relevant acousto-optical, Brillouin light scattering and Faraday wave-based techniques that have enabled the development of phonon lasers, quantum computers and advanced vibration sensors. In particular, our discussion is centred around potential applications of AFCs in precision measurements in various physical, chemical and biological systems in conditions where using light, and hence optical FCs, faces technical and fundamental limitations, which is, for example, the case in underwater distance measurements and biomedical imaging applications. This review article will also be of interest to readers seeking a discussion of specific theoretical aspects of different classes of AFCs. To that end, we support the mainstream discussion by the results of our original analysis and numerical simulations that can be used to design the spectra of AFCs generated using oscillations of gas bubbles in liquids, vibrations of liquid drops and plasmonic enhancement of Brillouin light scattering in metal nanostructures. We also discuss the application of non-toxic room-temperature liquid-metal alloys in the field of AFC generation.

Brillouin-Raman microspectroscopy for the morpho-mechanical imaging of human lamellar bone

Bone has a sophisticated architecture characterized by a hierarchical organization, starting at the sub-micrometre level. Thus, the analysis of the mechanical and structural properties of bone at this scale is essential to understand the relationship between its physiology, physical properties and chemical composition. Here, we unveil the potential of Brillouin-Raman microspectroscopy (BRaMS), an emerging correlative optical approach that can simultaneously assess bone mechanics and chemistry with micrometric resolution. Correlative hyperspectral imaging, performed on a human diaphyseal ring, reveals a complex microarchitecture that is reflected in extremely rich and informative spectra. An innovative method for mechanical properties analysis is proposed, mapping the intermixing of soft and hard tissue areas and revealing the coexistence of regions involved in remodelling processes, nutrient transportation and structural support. The mineralized regions appear elastically inhomogeneous, resembling the pattern of the osteons' lamellae, while Raman and energy-dispersive X-ray images through scanning electron microscopy show an overall uniform distribution of the mineral content, suggesting that other structural factors are responsible for lamellar micromechanical heterogeneity. These results, besides giving an important insight into cortical bone tissue properties, highlight the potential of BRaMS to access the origin of anisotropic mechanical properties, which are almost ubiquitous in other biological tissues.

Correlative all-optical quantification of mass density and mechanics of subcellular compartments with fluorescence specificity

Quantitative measurements of physical parameters become increasingly important for understanding biological processes. Brillouin microscopy (BM) has recently emerged as one technique providing the 3D distribution of viscoelastic properties inside biological samples - so far relying on the implicit assumption that refractive index (RI) and density can be neglected. Here, we present a novel method (FOB microscopy) combining BM with optical diffraction tomography and epifluorescence imaging for explicitly measuring the Brillouin shift, RI, and absolute density with specificity to fluorescently labeled structures. We show that neglecting the RI and density might lead to erroneous conclusions. Investigating the nucleoplasm of wild-type HeLa cells, we find that it has lower density but higher longitudinal modulus than the cytoplasm. Thus, the longitudinal modulus is not merely sensitive to the water content of the sample - a postulate vividly discussed in the field. We demonstrate the further utility of FOB on various biological systems including adipocytes and intracellular membraneless compartments. FOB microscopy can provide unexpected scientific discoveries and shed quantitative light on processes such as phase separation and transition inside living cells.

Brillouin and Raman Micro-Spectroscopy: A Tool for Micro-Mechanical and Structural Characterization of Cortical and Trabecular Bone Tissues

Human bone is a specialized tissue with unique material properties, providing mechanical support and resistance to the skeleton and simultaneously assuring capability of adaptation and remodelling. Knowing the properties of such a structure down to the micro-scale is of utmost importance, not only for the design of effective biomimetic materials but also to be able to detect pathological alterations in material properties, such as micro-fractures or abnormal tissue remodelling. The Brillouin and Raman micro-spectroscopic (BRmS) approach has the potential to become a first-choice technique, as it is capable of simultaneously investigating samples’ mechanical and structural properties in a non-destructive and label-free way. Here, we perform a mapping of cortical and trabecular bone sections of a femoral epiphysis, demonstrating the capability of the technique for discovering the morpho-mechanics of cells, the extracellular matrix, and marrow constituents. Moreover, the interpretation of Brillouin and Raman spectra merged with an approach of data mining is used to compare the mechanical alterations in specimens excised from distinct anatomical areas and subjected to different sample processing. The results disclose in both cases specific alterations in the morphology and/or in the tissue chemical make-up, which strongly affects bone mechanical properties, providing a method potentially extendable to other important biomedical issues.

Quantitative phase microscopy monitors subcellular dynamics in single cells exposed to nanosecond pulsed electric fields

A substantial body of literature exists to study the dynamics of single cells exposed to short duration (<1 μs), high peak power (~1 MV/m) transient electric fields. Much of this research is limited to traditional fluorescence-based microscopy techniques, which introduce exogenous agents to the culture and are only sensitive to a single molecular target. Quantitative phase imaging (QPI) is a coherent imaging modality which uses optical path length as a label-free contrast mechanism, and has proven highly effective for the study of single-cell dynamics. In this work, we introduce QPI as a useful imaging tool for the study of cells undergoing cytoskeletal remodeling after nanosecond pulsed electric field (nsPEF) exposure. In particular, we use cell swelling, dry mass and disorder strength measurements derived from QPI phase images to monitor the cellular response to nsPEFs. We hope this demonstration of QPI's utility will lead to a further adoption of the technique for the study of directed energy bioeffects.

Discriminating the Interaction Anisotropy in Polymorphs Using Powder Brillouin Light Scattering

Drug product performance is polymorph specific, and it is imperative that solid phase stability be monitored throughout the manufacturing process to ensure final product quality and performance. PXRD remains the gold standard for polymorph identification, but due to a growing interest in continuous manufacturing, a need has emerged for alternative process analytical technologies (PATs) that can provide fast, reliable, and non-destructive polymorph discrimination amenable to in situ process monitoring. Herein we demonstrate an original application of powder Brillouin light scattering (p-BLS) for the discrimination of polymorphic molecular solids. We hypothesize that the anisotropic sound velocities directly reflect the strength and orientation of the intermolecular forces in molecular solids. Redistributing these forces upon polymorphic conversion should thus clearly be reflected in the sound frequency distributions obtained by p-BLS. To test this hypothesis, three model compounds - resorcinol, sulfamerazine and furosemide - were selected. Distinct, polymorph-specific, acoustic frequency distributions were observed, and these p-BLS spectra were interpreted using a hydrogen-bond analysis and energy frameworks calculated from CrystalExplorer. In conclusion, this study clearly demonstrates that the sound frequencies measured in p-BLS are sensitive to the interaction forces in molecular solids, and p-BLS is a novel optical technique capable of reliably discriminating polymorphs. Extending this study further, we fully expect that many pharmaceutically relevant processes - e.g., hydrate formation, co-crystallization, or amorphous instability - could potentially be monitored using p-BLS.

Brillouin Spectroscopy: From Biomedical Research to New Generation Pathology Diagnosis

Brillouin spectroscopy has recently gained considerable interest within the biomedical field as an innovative tool to study mechanical properties in biology. The Brillouin effect is based on the inelastic scattering of photons caused by their interaction with thermodynamically driven acoustic modes or phonons and it is highly dependent on the material's elasticity. Therefore, Brillouin is a contactless, label-free optic approach to elastic and viscoelastic analysis that has enabled unprecedented analysis of ex vivo and in vivo mechanical behavior of several tissues with a micrometric resolution, paving the way to a promising future in clinical diagnosis. Here, we comprehensively review the different studies of this fast-moving field that have been performed up to date to provide a quick guide of the current literature. In addition, we offer a general view of Brillouin's biomedical potential to encourage its further development to reach its implementation as a feasible, cost-effective pathology diagnostic tool.

Multi-wavelength excitation Brillouin spectroscopy

We propose and demonstrate, first on simulated spectra and then experimentally, a novel approach to correct the undesired background distortions in the Brillouin spectra caused by molecular filter's absorption, fluorescent emission, ambient room light or any other constant contaminant. The developed multi-wavelength excitation Brillouin spectroscopy method computationally reconstructs the pure Brillouin component of the signal from multiple Brillouin spectra acquired using different excitation wavelengths. By removing the baseline distortions, the approach improves the goodness of fit of the Brillouin peaks, enabling accurate Brillouin shift and linewidth measurements from a wide range of challenging samples. In the present report, we explain the principle behind the method on a set of simulated spectra and present experimental application on an intentionally strongly-distorted spectrum. Utilizing the multi-excitation Brillouin spectroscopy approach, we successfully reconstruct Brillouin spectra of a highly-scattering sample, initially rendered not analyzable by excessive iodine absorption and contamination by out-of-focus light.

Transition across a sharp interface: Data from Raman and Brillouin imaging spectroscopy

Brillouin and Raman imaging are powerful techniques for the investigation of complex materials and they are widely used in material science and biophysics [1], [2], [3], [4], [5], [6], [7]. When dealing with microstructures, the results interpretation requires an accurate understanding of the interaction processes in presence of acoustic and chemical boundaries between different materials [8], [9], [10], [11], [12], [13], [14], [15]. The data here reported are obtained while scanning with sub-micron resolution the sharp interfaces between vitreous-SiO₂/Water and Polyethylene (PET)/Glycerol. Molecular and acoustic vibrations were observed by means of a recently developed micro-spectrometer, which acquires simultaneously Raman and Brillouin spectra on the same point with high spatial and spectral resolution [3]. Two external optic configurations were adopted in order to evidence the dependency of the measurements on the optical scattering volume. The evolution of the detected phonon modes, propagating and not propagating, is obtained by a direct observation of the raw data for the two interfaces, which present different acoustic mismatch. These experimental records can be exploited by researchers employing Raman and Brillouin imaging to discuss the resolution limit of the techniques and to compare the effect of different experimental set-ups. Moreover, thanks to their high spectral resolution they can be useful to researchers working on acoustic phonon transport at interfaces to model the dependency of transmission of long wavelength phonons on the acoustic mismatch.

Development and validation of hybrid Brillouin-Raman spectroscopy for non-contact assessment of mechano-chemical properties of urine proteins as biomarkers of kidney diseases

BACKGROUND

Proteinuria is a major marker of chronic kidney disease (CKD) progression and the predictor of cardiovascular mortality. The rapid development of renal failure is expected in those patients who have higher level of proteinuria however, some patients may have slow decline of renal function despite lower level of urinary protein excretion. The different mechanical (visco-elastic) and chemical properties, as well as the proteome profiles of urinary proteins might explain their tubular toxicity mechanism. Brillouin light scattering (BLS) and surface enhanced Raman scattering (SERS) spectroscopies are non-contact, laser optical-based techniques providing visco-elastic and chemical property information of probed human biofluids. We proposed to study and compare these properties of urinary proteins using BLS and SERS spectroscopies in nephrotic patient and validate hybrid BLS-SERS spectroscopy in diagnostic of urinary proteins as well as their profiling. The project ultimately aims for the development of an optical spectroscopic sensor for rapid, non-contact monitoring of urine samples from patients in clinical settings.

METHODS

BLS and SERS spectroscopies will be used for non-contact assessment of urinary proteins in proteinuric patients and healthy subjects and will be cross-validated by Liquid Chromatography-Mass Spectrometry (LC-MS). Participants will be followed-up during the 1 year and all adverse events such as exacerbation of proteinuria, progression of CKD, complications of nephrotic syndrome, disease relapse rate and inefficacy of treatment regimen will be registered referencing incident dates. Associations between urinary protein profiles (obtained from BLS and SERS as well as LC-MS) and adverse outcomes will be evaluated to identify most unfavored protein profiles.

DISCUSSION

This prospective study is focused on the development of non-contact hybrid BLS - SERS sensing tool and its clinical deployment for diagnosis and prognosis of proteinuria. We will identify the most important types of urine proteins based on their visco-elasticity, amino-acid profile and molecular weight responsible for the most severe cases of proteinuria and progressive renal function decline. We will aim for the developed hybrid BLS - SERS sensor, as a new diagnostic & prognostic tool, to be transferred to other biomedical applications.

TRIAL REGISTRATION

The trial has been approved by ClinicalTrials.gov (Trial registration ID NCT04311684). The date of registration was March 17, 2020.

Recent progress and current opinions in Brillouin microscopy for life science applications

Many important biological functions and processes are reflected in cell and tissue mechanical properties such as elasticity and viscosity. However, current techniques used for measuring these properties have major limitations, such as that they can often not measure inside intact cells and/or require physical contact-which cells can react to and change. Brillouin light scattering offers the ability to measure mechanical properties in a non-contact and label-free manner inside of objects with high spatial resolution using light, and hence has emerged as an attractive method during the past decade. This new approach, coined "Brillouin microscopy," which integrates highly interdisciplinary concepts from physics, engineering, and mechanobiology, has led to a vibrant new community that has organized itself via a European funded (COST Action) network. Here we share our current assessment and opinion of the field, as emerged from a recent dedicated workshop. In particular, we discuss the prospects towards improved and more bio-compatible instrumentation, novel strategies to infer more accurate and quantitative mechanical measurements, as well as our current view on the biomechanical interpretation of the Brillouin spectra.

Time-resolved Assessment of Drying Plants by Brillouin and Raman Spectroscopies

Raman and Brillouin spectroscopy enable non-invasive assessment of chemical and elastic properties of biomaterials, respectively. In this report, Brillouin micro-spectroscopy was used for the time-resolved analysis of elastic properties of Populus and Geranium leaves, while Raman micro-spectroscopy was employed for the assessment of their chemical variation during drying. Spectroscopic assessment of elastic and chemical properties can improve our understanding of mechano-chemical changes of plants in response to environmental stress and pathogens at the microscopic cellular level. This report demonstrates the potential of multimodal optical sensing and imaging of plants as an emerging technique for the quantitative assessment of agricultural crops.

Optical imaging spectroscopy for plant research: more than a colorful picture

Optical imaging is a routine and indispensable tool in plant research. Here we review different emerging spectrally resolved optical imaging approaches and the wealth of information they can be used to obtain pertaining to the underlying chemistry, structure and mechanics of plants.

Brillouin microscopy: an emerging tool for mechanobiology

The role and importance of mechanical properties of cells and tissues in cellular function, development and disease has widely been acknowledged, however standard techniques currently used to assess them exhibit intrinsic limitations. Recently, Brillouin microscopy, a type of optical elastography, has emerged as a non-destructive, label- and contact-free method that can probe the viscoelastic properties of biological samples with diffraction-limited resolution in 3D. This led to increased attention amongst the biological and medical research communities, but it also sparked debates about the interpretation and relevance of the measured physical quantities. Here, we review this emerging technology by describing the underlying biophysical principles and discussing the interpretation of Brillouin spectra arising from heterogeneous biological matter. We further elaborate on the technique's limitations, as well as its potential for gaining insights in biology, in order to guide interested researchers from various fields.

Impulsive stimulated Brillouin microscopy for non-contact, fast mechanical investigations of hydrogels

The mechanical properties of tissues and cells are increasingly recognized as an important feature for the understanding of pathological processes and as a diagnostic tool in biomedicine. Impulsive stimulated Brillouin scattering (ISBS) is promising to overcome shortcomings of other measurement methods such as invasiveness, low spatial resolution and long acquisition time. In this paper, we present for the first time ISBS measurements of hydrogels, which are model materials for biological samples. We demonstrate ISBS measurements discriminating hydrogels of different stiffness. ISBS measurements with lateral resolution close to cellular level are presented. These results underline that ISBS microscopy has a high potential for biomedical applications.

Brillouin Light Scattering: Applications in Biomedical Sciences

Brillouin spectroscopy and imaging are emerging techniques in analytical science, biophotonics, and biomedicine. They are based on Brillouin light scattering from acoustic waves or phonons in the GHz range, providing a nondestructive contactless probe of the mechanics on a microscale. Novel approaches and applications of these techniques to the field of biomedical sciences are discussed, highlighting the theoretical foundations and experimental methods that have been developed to date. Acknowledging that this is a fast moving field, a comprehensive account of the relevant literature is critically assessed here.

Light scattering methods for tissue diagnosis

Light scattering has become a common biomedical research tool, enabling diagnostic sensitivity to myriad tissue alterations associated with disease. Light-tissue interactions are particularly attractive for diagnostics due to the variety of contrast mechanisms that can be used, including spectral, angle-resolved, and Fourier-domain detection. Photonic diagnostic tools offer further benefit in that they are non-ionizing, non-invasive, and give real-time feedback. In this review, we summarize recent innovations in light scattering technologies, with a focus on clinical achievements over the previous ten years.

Nonlinear Brillouin spectroscopy: what makes it a better tool for biological viscoelastic measurements

Brillouin spectroscopy is an emerging tool in biomedical imaging and sensing. It is capable of assessing the high-frequency viscoelastic longitudinal modulus with microscopic spatial resolution. Nonlinear Brillouin spectroscopy based on impulsive stimulated Brillouin scattering offers a number of significant advantages over conventional spontaneous and stimulated Brillouin scattering. In this report, we evaluate the accuracy of Brillouin shift measurements in spontaneous and nonlinear Brillouin microscopy by calculating the Allan variance for both CW excited spontaneous Brillouin measurements and nonlinear Brillouin scattering measurements made with both nanosecond and picosecond pulse excitation. We find that impulsive stimulated Brillouin spectroscopy is superior to spontaneous Brillouin spectroscopy in terms of the accuracy of such measurements and demonstrate its application for assessing tiny changes in Brillouin frequency shifts associated with low concentrations of biologically relevant solutions.

Differentiating melanoma and healthy tissues based on elasticity-specific Brillouin microspectroscopy

The main objective of the present study is to evaluate the use of Brillouin microspectroscopy for differentiation of melanoma and normal tissues based on elasticity measurements. Previous studies of malignant melanoma show that the lesion is stiffer than the surrounding healthy tissue. We hypothesize that elasticity-specific Brillouin spectroscopy can be used to distinguish between healthy and cancerous regions of an excised melanoma from a Sinclair miniature swine. Brillouin measurements of non-regressing and regressing melanomas and the surrounding healthy tissues were performed. Based on the Brillouin measurements, the melanomas and healthy tissues can be successfully differentiated. The stiffness of both tumors is found to be significantly greater than the healthy tissues. Notably, we found that the elasticity of regressing melanoma is closer to that of the normal tissue. The results indicate that Brillouin spectroscopy can be utilized as a tool for elasticity-based differentiation between malignant melanoma and surrounding healthy tissue, with potential use for melanoma boundary identification, monitoring tumor progression, or response to treatment.

Morpho-mechanics of human collagen superstructures revealed by all-optical correlative micro-spectroscopies

In every biological tissue, morphological and topological properties strongly affect its mechanical features and behaviour, so that ultrastructure, composition and mechanical parameters are intimately connected. Overall, it is their correct interplay that guarantees the tissue functionality. The development of experimental methods able to correlate these properties would open new opportunities both in the biological and the biomedical fields. Here, we report a correlative study intended to map supramolecular morphology, biochemical composition and viscoelastic parameters of collagen by all-optical microscopies. In particular, using human corneal tissue as a benchmark, we correlate Second-Harmonic Generation maps with mechanical and biochemical imaging obtained by Brillouin and Raman micro-spectroscopy. The study highlights how subtle variations in supramolecular organization originate the peculiar mechanical behavior of different subtypes of corneal lamellae. The presented methodology paves the way to the non-invasive assessment of tissue morpho-mechanics in biological as well as synthetic materials.

Single etalon design for two-stage cross-axis VIPA spectroscopy

Two-stage cross axis VIPA spectrometers have been widely used in Brillouin microscopy since they provide single shot spectral measurements at high throughput and extinction. However, this spectrometer configuration presents challenges such as size, cost and alignment difficulties between the two cascaded etalons. Here, we present a cross-axis VIPA spectrometer that implements a single etalon, using a light recirculation architecture to achieve the multistage configuration.

Brillouin Light Scattering: Development of a Near Century-Old Technique for Characterizing the Mechanical Properties of Materials

Brillouin light scattering (BLS), a technique theoretically described nearly a century back by the French physicist Léon Brillouin in 1922, is a light-scattering method for determining the mechanical properties of materials. This inelastic scattering method is described by the Bragg diffraction of light from a propagating fluctuation in the local dielectric. These fluctuations arise spontaneously from thermally populated sound waves intrinsic to all materials, and thus BLS may be broadly applied to transparent samples of any phase. This review begins with a brief historical overview of the development of BLS, from its theoretical prediction to the current state of the art, and notes specific technological advancements that enabled the development of BLS. Despite the broad utility of BLS, no commercial spectrometer is currently available for purchase, but rather individual components are assembled to suit a specific application. Central to any BLS spectrometer is the interferometer, and its performance characteristics-scanning or non-scanning, multi-passing, and stabilization-are critical considerations for spectrometer design. Consistent with any light-scattering method, the frequency shift is a key observable in BLS, and we summarize the connection of this measurement to evaluate the mechanical properties of materials. With emphasis toward pharmaceutical materials analysis, we introduce the traditional BLS approach for single-crystal elasticity, and this is followed by a discussion of more recent developments in powder BLS. We conclude our review with a perspective on future developments in BLS that may enable BLS as a novel addition to the current catalog of process analytical technologies.

Brillouin spectroscopy and radiography for assessment of viscoelastic and regenerative properties of mammalian bones

Biomechanical properties of mammalian bones, such as strength, toughness, and plasticity, are essential for understanding how microscopic-scale mechanical features can link to macroscale bones' strength and fracture resistance. We employ Brillouin light scattering (BLS) microspectroscopy for local assessment of elastic properties of bones under compression and the efficacy of the tissue engineering approach based on heparin-conjugated fibrin (HCF) hydrogels, bone morphogenic proteins, and osteogenic stem cells in the regeneration of the bone tissues. BLS is noninvasive and label-free modality for probing viscoelastic properties of tissues that can give information on structure-function properties of normal and pathological tissues. Results showed that MCS and BPMs are critically important for regeneration of elastic and viscous properties, respectively, HCF gels containing combination of all factors had the best effect with complete defect regeneration at week nine after the implantation of bone grafts and that the bones with fully consolidated fractures have higher values of elastic moduli compared with defective bones.

Assessing corneal biomechanics with Brillouin spectro-microscopy

A new Brillouin spectro-microscope was designed and built to investigate the mechanical properties of bovine and human corneas. This instrument integrates a single-stage virtually imaged phased array spectrometer with a novel adaptive-optics interferometric filter to achieve unprecedented rejection of the elastic background signal. As a result, highly-resolved, reproducible data from both thin and thick collagen-based materials were obtained. In particular, this technique is capable of rigorously measuring the relative stiffness of different areas of human corneas, thus providing a true non-contact method to characterise the fundamental mechanical features of both live and fixed biological tissue samples.

Yeast Biofilm as a Bridge Between Medical and Environmental Microbiology Across Different Detection Techniques

Medical and environmental microbiology have two distinct, although very short, histories stemming, the first from the pioneering works of Sommelweiss, Pasteur, Lister and Koch, the second mainly from the studies of Bejerink and Winogradsky. These two branches of microbiology evolved and specialized separately producing distinct communities and evolving rather different approaches and techniques. The evidence accumulated in recent decades indicate that indeed most of the medically relevant microorganisms have a short circulation within the nosocomial environment and a larger one involving the external, i.e. non-nosocomial, and the hospital environments. This evidence suggests that the differences between approaches should yield to a convergent approach aimed at solving the increasing problem represented by infectious diseases for the increasingly less resistant human communities. Microbial biofilm is one of the major systems used by these microbes to resist the harsh conditions of the natural and anthropic environment, and the even worse ones related to medical settings. This paper presents a brief outline of the converging interest of both environmental and medical microbiology toward a better understanding of microbial biofilm and of the various innovative techniques that can be employed to characterize, in a timely and quantitative manner, these complex structures. Among these, micro-Raman along with micro-Brillouin offer high hopes of describing biofilms both at the subcellular and supercellular level, with the possibility of characterizing the various landscapes of the different biofilms. The possibility of adding a taxonomic identification of the cells comprising the biofilm is a complex aspect presenting several technical issues that will require further studies in the years to come.

Non-contact mechanical and chemical analysis of single living cells by microspectroscopic techniques

Innovative label-free microspectroscopy, which can simultaneously collect Brillouin and Raman signals, is used to characterize the viscoelastic properties and chemical composition of living cells with sub-micrometric resolution. The unprecedented statistical accuracy of the data combined with the high-frequency resolution and the high contrast of the recently built experimental setup permits the study of single living cells immersed in their buffer solution by contactless measurements. The Brillouin signal is deconvoluted in the buffer and the cell components, thereby revealing the mechanical heterogeneity inside the cell. In particular, a 20% increase is observed in the elastic modulus passing from the plasmatic membrane to the nucleus as distinguished by comparison with the Raman spectroscopic marker. Brillouin line shape analysis is even more relevant for the comparison of cells under physiological and pathological conditions. Following oncogene expression, cells show an overall reduction in the elastic modulus (15%) and apparent viscosity (50%). In a proof-of-principle experiment, the ability of this spectroscopic technique to characterize subcellular compartments and distinguish cell status was successfully tested. The results strongly support the future application of this technique for fundamental issues in the biomedical field.

Assessing performance of modern Brillouin spectrometers

Brillouin spectroscopy and imaging has experienced a renaissance in recent years seeing vast improvements in methodology and increasing number of applications. With this resurgence has come the development of new spontaneous Brillouin instruments that often tout superior performance compared to established conventional systems such as tandem Fabry-Perot interferometers (TFPI). The performance of these new systems cannot always be thoroughly examined beyond the scope of the intended application, as applications often take precedence in reports. We therefore present evaluation of three modern Brillouin spectrometers: two VIPA-based spectrometers with wavelength-specific notch filters, and one scanning 6-pass TFPI. Performance analysis is presented along with a discussion about the dependence of measurements on excitation laser source and the various susceptibilities of each system.

Revealing the glass transition in shape memory polymers using Brillouin spectroscopy

Emerging medical devices which employ shape memory polymers (SMPs) require precise measurements of the glass transition temperature (T_g) to ensure highly controlled shape recovery kinetics. Conventional techniques like differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) have limitations that prevent utilization for certain devices, including limited accuracy and the need for sacrificial samples. In this report, we employ an approach based on Brillouin spectroscopy to probe the glass transition of SMPs rapidly, remotely, and nondestructively. Further, we compare the T_g obtained from Brillouin scattering with DMA- and DSC-measured T_g to demonstrate the accuracy of Brillouin scattering for this application. We conclude that Brillouin spectroscopy is an accurate technique for obtaining the glass transition temperature of SMPs, aligning closely with the most common laboratory standards while providing a rapid, remote, and nondestructive method for the analysis of unique polymeric medical devices.

Optical assessment of changes in mechanical and chemical properties of adipose tissue in diet-induced obese rats

Obesity is becoming a leading cause of health problems world-wide. Obesity and overweight are associated with the structural and chemical changes in tissues; however, few methods exist that allow for concurrent measurement of these changes. Using Brillouin and Raman microspectroscopy, both the mechanical and chemical differences can be assessed simultaneously. We hypothesized that Brillouin spectroscopy can measure the adipose tissues' stiffness, which increases in obesity. Samples of brown and white adipose tissues obtained from control and diet-induced obese adult rats were analyzed. The results show that both adipose tissues of the obese group exhibit a greater high-frequency longitudinal elastic modulus than the control samples, and that the brown fat is generally stiffer than white adipose. The Raman spectra indicate that the lipids' accumulation in adipose tissue outpaces the fibrosis, and that the high-fat diet has a greater effect on the brown adipose than the white fat. Overall, the powerful combination of Brillouin and Raman microspectroscopies successfully assessed both the mechanical properties and chemical composition of adipose tissue simultaneously for the first time. The results indicate that the adipose tissue experiences an obesity-induced increase in stiffness and lipid content, with the brown adipose tissue undergoing a more pronounced change compared to white adipose.

High-speed Continuous-wave Stimulated Brillouin Scattering Spectrometer for Material Analysis

Recent years have witnessed a significant increase in the use of spontaneous Brillouin spectrometers for non-contact analysis of soft matter, such as aqueous solutions and biomaterials, with fast acquisition times. Here, we discuss the assembly and operation of a Brillouin spectrometer that uses stimulated Brillouin scattering (SBS) to measure stimulated Brillouin gain (SBG) spectra of water and lipid emulsion-based tissue-like samples in transmission mode with <10 MHz spectral-resolution and <35 MHz Brillouin-shift measurement precision at <100 ms. The spectrometer consists of two nearly counter-propagating continuous-wave (CW) narrow-linewidth lasers at 780 nm whose frequency detuning is scanned through the material Brillouin shift. By using an ultra-narrowband hot rubidium-85 vapor notch filter and a phase-sensitive detector, the signal-to-noise-ratio of the SBG signal is significantly enhanced compared to that obtained with existing CW-SBS spectrometers. This improvement enables measurement of SBG spectra with up to 100-fold faster acquisition times, thereby facilitating high spectral-resolution and high-precision Brillouin analysis of soft materials at high speed.

Probing the internal micromechanical properties of Pseudomonas aeruginosa biofilms by Brillouin imaging

Biofilms are organised aggregates of bacteria that adhere to each other or surfaces. The matrix of extracellular polymeric substances that holds the cells together provides the mechanical stability of the biofilm. In this study, we have applied Brillouin microscopy, a technique that is capable of measuring mechanical properties of specimens on a micrometre scale based on the shift in frequency of light incident upon a sample due to thermal fluctuations, to investigate the micromechanical properties of an active, live Pseudomonas aeruginosa biofilm. Using this non-contact and label-free technique, we have extracted information about the internal stiffness of biofilms under continuous flow. No correlation with colony size was found when comparing the averages of Brillouin shifts of two-dimensional cross-sections of randomly selected colonies. However, when focusing on single colonies, we observed two distinct spatial patterns: in smaller colonies, stiffness increased towards their interior, indicating a more compact structure of the centre of the colony, whereas, larger (over 45 μm) colonies were found to have less stiff interiors.

A specialized microscopy technique can monitor biofilm stiffness in a non-destructive manner, yielding insights into biofilm structure and development. The technique, called Brillouin imaging, uses changes in the frequency of light interacting with a substance to reveal fine detail about the material’s mechanical properties. Peter Török and colleagues at Imperial College London, with co-workers in Singapore, used Brillouin imaging to study biofilms of Pseudomonas aeruginosa bacteria at different stages in their life cycle. In young colonies, stiffness increased towards the interior of the biofilm, while mature colonies had less stiff interiors. The older biofilms may therefore have hollow interiors or may have been moving towards a phase of bacterial dispersal from the biofilm state. This non-disruptive method to study mechanical variations within and between living biofilms may help efforts to combat biofilms in clinical, environmental and industrial situations.

Assessment of Local Heterogeneity in Mechanical Properties of Nanostructured Hydrogel Networks

Our current understanding of the mechanical properties of nanostructured biomaterials is rather limited to invasive/destructive and low-throughput techniques such as atomic force microscopy, optical tweezers, and shear rheology. In this report, we demonstrate the capabilities of recently developed dual Brillouin/Raman spectroscopy to interrogate the mechanical and chemical properties of nanostructured hydrogel networks. The results obtained from Brillouin spectroscopy show an excellent correlation with the conventional uniaxial and shear mechanical testing. Moreover, it is confirmed that, unlike the macroscopic conventional mechanical measurement techniques, Brillouin spectroscopy can provide the elasticity characteristic of biomaterials at a mesoscale length, which is remarkably important for understanding complex cell-biomaterial interactions. The proposed technique experimentally demonstrated the capability of studying biomaterials in their natural environment and may facilitate future fabrication and inspection of biomaterials for various biomedical and biotechnological applications.

High-contrast Brillouin and Raman micro-spectroscopy for simultaneous mechanical and chemical investigation of microbial biofilms

Mechanical mapping with chemical specificity of biological samples is now made possible by joint micro-Brillouin and micro-Raman measurements. In this work, thanks to the unprecedented contrast of a new tandem Fabry-Perot interferometer, we demonstrate simultaneous detection of Brillouin and Raman spectra from different Candida biofilms. Our proof-of-concept study reveals the potential of this label-free joint micro-spectroscopy technique in challenging microbiological issues. In particular, heterogeneous chemo-mechanical maps of Candida biofilms are obtained, without the need for staining or touching the sample. The correlative Raman and Brillouin investigation evidences the role of both extracellular polymeric substances and of hydration water in inducing a marked local softening of the biofilm.

Single-shot chemical detection and identification with compressed hyperspectral Raman imaging

Raman imaging is a powerful method to identify and detect chemicals, but the long acquisition time required for full spectroscopic Raman images limits many practical applications. Compressive sensing and compressed ultrafast photography have recently demonstrated the acquisition of multi-dimensional data sets with single-shot detection. In this Letter, we demonstrate the utilization of compressed sensing for single-shot compressed Raman imaging. In particular, we use this technique to demonstrate the identification of two similarly white substances in one image via the recovered two-dimensional array of Raman spectra. This technique can be further extended by coupling the compressed sensing apparatus with a microscope for compressed hyperspectral imaging microscopy.