Enhanced Photoelectrochemical Immunosensing Platform Based on CdSeTe@CdS:Mn Core–Shell Quantum Dots-Sensitized TiO2 Amplified by CuS Nanocrystals Conjugated Signal Antibodies

Anisotropic Dual S-Scheme Heterojunctions Mimic Natural Photosynthetic System for Boosting Photoelectric Response

The design of heterojunctions that mimic natural photosynthetic systems holds great promise for enhancing photoelectric response. However, the limited interfacial space charge layer (SCL) often fails to provide sufficient driving force for the directional migration of inner charge carriers. Drawing inspiration from the electron transport chain (ETC) in natural photosynthesis system, we developed a novel anisotropic dual S-scheme heterojunction artificial photosynthetic system composed of Bi2O3-BiOBr-AgI for the first time, with Bi2O3 and AgI selectively distributed along the bicrystal facets of BiOBr. Compared to traditional semiconductors, the anisotropic carrier migration in BiOBr overcomes the recombination resulting from thermodynamic diffusion, thereby establishing a potential ETC for the directional migration of inner charge carriers. Importantly, this pioneering bioinspired design overcomes the limitations imposed by the limited distribution of SCL in heterojunctions, resulting in a remarkable 55-fold enhancement in photoelectric performance. Leveraging the etching of thiols on Ag-based materials, this dual S-scheme heterojunction is further employed in the construction of photoelectrochemical sensors for the detection of acetylcholinesterase and organophosphorus pesticides.

Target-triggered cascade signal amplification in nanochannels: An ingenious strategy for ultrasensitive photoelectrochemical DNA bioanalysis

Artificial solid-state nanochannels have aroused intense interests in biosensors and bioelectronics because of their special architectures. Herein, we pioneered an ingenious approach of target-triggered cascade signal amplification in porous anodic aluminum oxide (AAO) nanochannels for ultrasensitive photoelectrochemical (PEC) DNA bioanalysis. In the design, AAO nanochannels were modified initially with capture DNA (cDNA) and then incorporated with a photoelectrode, yielding the desired architecture of highly ordered nanoarrays on top of the signal transducer. For target DNA (tDNA) probing, exonuclease III (Exo-III) mediated target recycling (ETR) was first activated to generate plenty of output DNA (oDNA) fragments. After oDNA and the conjugate of Au-labeled probe DNA (Au-pDNA) were anchored within the nanochannels via DNA hybridization, in-situ synthesis of Ag shells on tethered Au nanoparticles was conducted. The resulting large-sized Au@Ag core-shell nanostructure within the nanochannels would cause conspicuous blocking effect to hinder the transportation of electrons accessing the photoelectrode. Since the signal inhibition was directly related to tDNA concentration, an innovative nanochannels PEC DNA assay was exploited and qualified for ultrasensitive detection. The anti-interference ability of this platform was also emphasized by the split AAO membrane for biological incubation without participation of the photoelectrode. This featured nanochannels PEC strategy with cascade amplification launched a novel detecting platform for trace levels of DNA, and it could spark more inspiration for a follow-up exploration of other smart nanochannels PEC bioassays.

A Direct-Contact Photocurrent-Direction-Switching Biosensing Platform Based on In Situ Formation of CN QDs/TiO2 Nanodiscs and Double-Supported 3D DNA Walking Amplification

Herein, a direct-contact photocurrent-direction-switching photoelectrochemical (PEC) biosensing platform for the ultrasensitive and selective detection of soluble CD146 (sCD146) is reported for the first time via in situ formation of carbon nitride quantum dots (CN QDs)/titanium dioxide (TiO2 ) nanodiscs with the double-supported 3D DNA walking amplification. In this platform, metal organic frameworks (MOFs)-derived porous TiO2 nanodiscs exhibit excellent anodic photocurrent, whereas a single-stranded auxiliary DNA (ssDNA) as biogate is absorbed onto the TiO2 nanodiscs to block active sites. Subsequently, with the help of intermediate DNAs from target sCD146-induced double-supported 3D DNA walking signal amplification, the ssDNA can leave away from the surface of TiO2 nanodiscs due to the specific hybridization with intermediate DNAs. Afterward, the successful direct contact of CN QDs on TiO2 nanodiscs by porosity and electrostatic adsorption, leads to the effective photocurrent-direction switching from anodic to cathodic photocurrent. Based on direct-contact photocurrent-direction-switching CN QDs/TiO2 nanodiscs system and double-supported 3D DNA walking signal amplification, sCD146 is detected sensitively with a wide linear range (10 fg mL-1 to 5 ng mL-1 ) and a low limit of detection (2.1 fg mL-1 ). Also, the environmentally friendly and direct-contact photocurrent-direction-switching PEC biosensor has an application prospect for cancer biomarker detection.

Photoelectrochemical detection of superoxide anions released from mitochondria in HepG2 cells based on the synergistic effect of MnO2@Co3O4 core-shell p-n heterojunction

The detection and comparison of the amount of superoxide anion (O2.-) released by different complexes in mitochondrial electron transport chain (ETC) can locate the main electron leakage sites in mitochondria. In order to realize this, we designed an ultrasensitive photoelectrochemical (PEC) sensor by in situ hydrothermal growth of MnO2 nanosheets on Co3O4 nanowires array modified Ti substrate (NWA|Ti). Due to the formation of a core-shell p-n heterojunction with high specific surface area, tight surface contact and plentiful oxygen vacancies (OVs), MnO2@Co3O4 NWA|Ti possesses a strong visible light absorption, high charges transfer and separation ability. The proposed PEC sensor exhibited a wide linear range of 0.1-50000 nM and a low detection limit of 0.025 nM towards H2O2. Due to the rapid conversion of O2.- to H2O2 inside mitochondria, the PEC sensor can indirectly monitor the electron leakage in the ETC. Specifically, four selected mitochondrial inhibitors specifically inhibited the corresponding complex in mitochondria extracted from living HepG2 cells (hepatocellular carcinoma cells), and the H2O2 levels converted from O2.- was measured by the PEC sensor. It is evident that IQ (ubiquinone binding) site of complex I and Qo (ubiquinol oxidation) site of complex III are the key sites at which electron leakage occurred. This study could provide meaningful information for the diagnosis and treatment of certain disease caused by oxidative stress due to the electron leakage.

Engineered Branching Peptide as Dual-Functional Antifouling and Recognition Probe: Toward a Dual-Photoelectrode Protein Biosensor with High Accuracy

The building of practical biosensors that have anti-interference abilities against biofouling of nonspecific proteins and biooxidation of reducing agents in actual biological matrixes remains a great challenge. Herein, a robust photoelectrochemical (PEC) biosensor capable of accurate detection in human serum was pioneered through the integration of a new engineered branching peptide (EBP) into a synergetic dual-photoelectrode system. The synergetic dual-photoelectrode system involved the tandem connection of a C3N4/TiO2 photoanode and a AuPt/PANI photocathode, while the EBP as a dual-functional antifouling and recognition probe featured an inverted Y-shaped configuration with one recognition backbone and two antifouling branches. Such an EBP enables a simple procedure for electrode modification and an enhanced antifouling nature compared to a regular linear peptide (LP), as theoretically supported by the results from molecular dynamics simulations. The as-developed PEC biosensor had a higher photocurrent response and a good antioxidation property inherited from the photoanode and photocathode, respectively. Targeting the model protein biomarker of cardiac troponin I (cTnI), this biosensor achieved good performances in terms of high sensitivity, specificity, and anti-interference.

Integration of CuS/ZnIn2S4 flower-like heterojunctions and (MnCo)Fe2O4 nanozyme for signal amplification and their application to ultrasensitive PEC aptasensing of cancer biomarker

Vascular endothelial growth factor 165 (VEGF₁₆₅) is a crucial regulator of angiogenesis and works as a major protein biomarker of cancer metastasis. Therefore, its quantitative detection is pivotal in clinic. In this work, CuS/ZnIn₂S₄ flower-like heterojunctions had strong and stable photocurrents, which behaved as photoactive material to construct a photoelectrochemical (PEC) aptasensor for detecting VEGF₁₆₅, combined by home-prepared (MnCo)Fe₂O₄ nanozyme-mediated signal amplification. The interfacial photo-induced electron transfer mechanism was chiefly discussed by UV-vis diffuse reflectance spectroscopy in details. Specifically, the (MnCo)Fe₂O₄ modified VEGF₁₆₅ aptamer was released from the PEC aptasensing platform for its highly specific affinity to target VEGF₁₆₅, which terminated the color precipitation reaction, ultimately recovering the PEC signals. The developed sensor displayed a wider linear range from 1 × 10^-2 to 1 × 10⁴ pg mL^-1 with a smaller limit of detection (LOD) of 0.1 fg mL^-1. This study provides some valuable insights for building other ultrasensitive aptasensors for clinical assays of cancer biomarkers in practice.

Electrochemical and Photoelectrochemical Immunosensors for the Detection of Ovarian Cancer Biomarkers

Photoelectrochemical (PEC) sensing is an emerging technological innovation for monitoring small substances/molecules in biological or non-biological systems. In particular, there has been a surge of interest in developing PEC devices for determining molecules of clinical significance. This is especially the case for molecules that are markers for serious and deadly medical conditions. The increased interest in PEC sensors to monitor such biomarkers can be attributed to the many apparent advantages of the PEC system, including an enhanced measurable signal, high potential for miniaturization, rapid testing, and low cost, amongst others. The growing number of published research reports on the subject calls for a comprehensive review of the various findings. This article is a review of studies on electrochemical (EC) and PEC sensors for ovarian cancer biomarkers in the last seven years (2016-2022). EC sensors were included because PEC is an improved EC; and a comparison of both systems has, expectedly, been carried out in many studies. Specific attention was given to the different markers of ovarian cancer and the EC/PEC sensing platforms developed for their detection/quantification. Relevant articles were sourced from the following databases: Scopus, PubMed Central, Web of Science, Science Direct, Academic Search Complete, EBSCO, CORE, Directory of open Access Journals (DOAJ), Public Library of Science (PLOS), BioMed Central (BMC), Semantic Scholar, Research Gate, SciELO, Wiley Online Library, Elsevier and SpringerLink.

Label-free photoelectrochemical immunosensing of α-fetoprotein based on Eu-TiO2 nanocomposites sensitized with dye-encapsulated HMA

In this study, a sensitive photoelectrochemical immunosensor with dye-enhanced anodic photocurrent response was proposed for sensitive detection of α-fetoprotein (AFP). Specifically, europium-doped TiO₂ (Eu-TiO₂) was used as the photoelectrochemical functional material and coated onto indium tin oxide (ITO) electrode. Doxorubicin (DOX) as an excellent fluorescent dye was encapsulated in the hydrophobically modified alginate (HMA). Then the dye-loaded HMA was modified onto the surface of Eu-TiO₂ to further sensitize the photocurrent response. The results showed that the photoelectrical signal was enhanced and stabilized due to the effect of sensitization of DOX on Eu-TiO₂ material. The constructed PEC sensor revealed a good linear response to AFP antigen ranging from 0.5 to 100 ng/mL with a detection limit of 0.41 pg/mL. The clinical patient's serum test results obtained from the proposed PEC immunosensor were consistent with those obtained from the commercial electrochemilunescence assay. The proposed PEC sensing method could be a promising analytical tool for the detection of AFP in clinical analysis.

Advances in Electrochemical Biosensors Based on Nanomaterials for Protein Biomarker Detection in Saliva

The focus on precise medicine enhances the need for timely diagnosis and frequent monitoring of chronic diseases. Moreover, the recent pandemic of severe acute respiratory syndrome coronavirus 2 poses a great demand for rapid detection and surveillance of viral infections. The detection of protein biomarkers and antigens in the saliva allows rapid identification of diseases or disease changes in scenarios where and when the test response at the point of care is mandated. While traditional methods of protein testing fail to provide the desired fast results, electrochemical biosensors based on nanomaterials hold perfect characteristics for the detection of biomarkers in point-of-care settings. The recent advances in electrochemical sensors for salivary protein detection are critically reviewed in this work, with emphasis on the role of nanomaterials to boost the biosensor analytical performance and increase the reliability of the test in human saliva samples. Furthermore, this work identifies the critical factors for further modernization of the nanomaterial-based electrochemical sensors, envisaging the development and implementation of next-generation sample-in-answer-out systems.

Magnetic grinding synthesis of copper sulfide-based photocatalytic composites for the degradation of organic dyes under visible light

CuS based composites prepared by magnetic grinding method with metal and sulfur powder as raw materials have photocatalytic activity.

A "signal-on" photoelectrochemical sensor for human epidermal growth factor receptor 2 detection based on Y6/CdS organic-inorganic heterojunction

A "signal-on" photoelectrochemical (PEC) immunosensor was successfully constructed for determination of human epidermal growth factor receptor 2 (HER2) based on organic-inorganic heterojunction Y6/CdS as photoactive material. Compared with single organic semiconductor, Y6, Y6/CdS exhibited higher photoelectric conversion efficiency due to the formation of heterojunction. In the presence of HER2, sandwich immune structure was formed between HER2 aptamer and anti-HER2 antibody (Ab) by specific recognition. The polydopamine (PDA) nanoparticles were used for signal amplification to enhance photocurrent intensity as PDA can act as electron donor to eliminate holes and promote electron-hole pairs separation. The developed PEC sensor displayed a wide detection range of 5-1000 pg mL^-1 and a low detection limit of 2.2 pg mL^-1 for HER2 (S/N = 3). The sensor was successfully used for the detection of HER2 in serum with recoveries between 94.8 and 104% and relative standard deviations (RSDs) in the range of 1.2-4.3%. Furthermore, the designed immunosensor possessed good stability, selectivity, and reproducibility, which can find potential clinical applications for disease diagnosis. A "signal-on" photoelectrochemical sensor was reported for human epidermal growth factor receptor 2 detection based on Y6/CdS organic-inorganic heterojunction.

A Paper-Based Photoelectrochemical Sensing Platform Based on In Situ Grown ZnO/ZnIn2S4 Heterojunctions onto Paper Fibers for Sensitively Detecting AFP

Nowadays, developing a cost-effective, easy-to-operate, and efficient signal amplification platform is of important to microfluidic paper-based analytical devices (μPAD) for end-use markets of point-of-care (POC) assay applications. Herein, an ultrasensitive, paper-based photoelectrochemical (PEC) bioassay platform is constructed by in situ grown ZnO/ZnIn2S4 heterojunctions onto paper fibers, which acted as photoactive signal amplification probes for enhancing the sensitivity of antibodies-based diagnostic assays, for the sensitive detection of alpha-fetoprotein (AFP) targets. The crystalline flake-like ZnIn2S4 composited with hexagonal nanorods (NRs) morphology of ZnO is an in situ grown, at the first time, onto cellulose fibers surface supported with Au nanoparticle (Au NP) modification to improve conductivity of the device working zone. The obtained composites on paper fibers are implemented as a flexible paper-based photoelectrode to realize remarkable performance of the fabricated μPAD, resulting from the enhanced PEC activity of heterojunctions with effective electron-hole pair separation for accelerating photoelectric conversion efficiency of the sensing process under light irradiation. Once the target AFP was introduced into the biosensing interface assistant, with a specific recognition interaction of AFP antibody, a drastically photocurrent response was generated, in view of the apparent steric effects. With the concentration increase of AFP targets, more immune conjugates could be confined onto the biosensing interface, eventually leading to the quantitative decrease of photocurrent intensity. Combined with an ingenious origami design and permitting the hydrophobic/hydrophilic conversion procedure in the bioassay process, the ultrasensitive PEC detection of AFP targets was realized. Under the optimized conditions, the level of AFP could be sensitively tracked by the prepared μPAD with a liner range from 0.1 to 100 ng mL-1 and limit of detection of 0.03 ng mL-1. This work provides a great potential application for highly selective and sensitive POC testing of AFP, and finally, developments for clinical disease diagnosis.

Ultrasensitive photoelectrochemical immunosensor based on Dual-Photosensitive electrodes

In the study, a photoelectrochemical (PEC) immunosensor based on dual-photosensitive electrodes was developed for cardiac troponin I (cTnI) detection. The sensing photocathode with biometric functions was prepared by CuInS₂ and narrow band gap semiconductor In₂S₃ as the counter electrode. In this way, the separation of photoanode and biometric events was realized, and the ability of stability of the immunosensor could be effectively improved. Moreover, the attraction to the photogenerated electrons (e^-) from photoanode would be increased by the abundant holes (h⁺) of photocathode, under the radiation of light. This tremendously improves the photoelectric response, which further improves the sensitivity of the immunosensor. The controllable-synthesis uncomplicated photoelectric material not only accords with the principle of simplicity of electrode modification but also makes the immunosensor more conducive to the practical application. Additionally, even in the case of zero bias voltage, the constructed PEC immunosensor can operate with high efficiency, namely, self-powered. The immunosensor could provide the quantitative readout photocurrent to a concentration of cTnI in the range of 0.10 pg/mL to 1.00 μg/mL and the detection limit was 0.0113 pg/mL under the optimal experimental conditions. With favorable performance in terms of anti-interference, stability, specificity and reproducibility, this immunosensor will provide new prospects for general PEC bioanalysis development.

Black phosphorous quantum dots for signal-on cathodic photoelectrochemical aptasensor monoitoring amyloid β peptide

In this paper, a quantitative cathodic photoelectrochemical aptasensor is described by using black phosphorous quantum dots (BPQDs) as photoactive material and assisted by heme as electron acceptor for sensing of amyloid β peptide (Aβ). Specifically, BPQDs were synthesized by solvothermal method and characterized by various techniques. The as-prepared BPQDs were assembled on the transparent indium tin oxide electrode, and the positively charged poly-l-lysine (PLL) was then absorbed onto BPQDs via electronic interaction. Subsequently, the aptamer as the specific recognition element for Aβ oligomer was introduced on the BPQDs-PLL modified electrode. After bound with heme to form Aβ-heme complex, Aβ oligomer was simultaneously captured by the aptamer on the electrode, resulting in an enhanced photocurrent response. Under the optimized conditions, the present PEC sensor reveals a good linear response to Aβ peptide ranging from 1.0 fM to 100 nM with a detection limit of 0.87 fM. The present signal-on cathodic PEC bioassay possesses the potential to create a new paradigm in amplified PEC assays that could provide outstanding performance for bioanalysis.

Preparation of C/Ho co-doped TiO2 for enhancing the photocatalytic degradation efficiency of tetracycline hydrochloride

A new C/Ho co-doped TiO2 catalyst was synthesized with Ti3C2Tx MXene and the photocatalytic performance was found to be significantly enhanced.

A photoelectrochemical sensor for glutathione based on Bi2S3-modified TiO2 nanotube arrays

A novel photoelectrochemical sensor for the determination of glutathione based on Bi2S3-modified TiO2 nanotube arrays. Under the excitation of visible light, glutathione can be oxidized by the holes created by the Bi2S3/TiO2 NTAs.

Versatile photoelectrochemical and electrochemiluminescence biosensor based on 3D CdSe QDs-DNA nanonetwork-SnO2 nanoflower coupled with DNA walker amplification for HIV detection

A novel 3D CdSe quantum dots (QDs)-DNA nanonetwork was assembled to sensitize the mesoporous SnO₂ photoelectrochemical (PEC) substrate, which was coupled with a biped-DNA walker multiple amplification technique to design a versatile electrochemiluminescence (ECL) and PEC biosensor for dual detection of HIV. Firstly, the photosensitive CdSe QDs and SnO₂ nanoflowers have well-matched band-edge energy level, thus their complex can promote effective transfer of the photogenerated carriers, and show better PEC and ECL property. Then, a novel 3D CdSe QDs-DNA nanonetwork was assembled and loaded with a large amount of QDs, which was used as multifunctional PEC and ECL probes. Moreover, the target-triggered biped DNA walker-cascade amplification method was introduced to generate a large amount of output DNA, which was used to link numerous 3D CdSe QDs-DNA nanonetwork probes to the electrode, generating greatly amplified signals for sensitive assay of HIV. The highly photosensitive 3D CdSe QDs-DNA reticulated nanomaterials have high stability and controllability, and display significantly improved PEC and ECL signals of the biosensor. This method opened a new photoelectric nanocomposite of QDs-sensitized SnO₂ nanoflower, and developed a versatile biosensing strategy using the 3D CdSe QD_S DNA sensitization probes for ultra-sensitive detection of biomolecules, which is important for the early diagnosis of diseases.

Signal-off photoelectrochemical aptasensor for kanamycin: Strand displacement reaction combines p-n competition

A"signal-off" photoelectrochemical aptasensor based on p-n type semiconductor competitive quenching effect and strand displacement reaction was constructed for the determination of kanamycin. Au NPs@MgIn₂S₄-graphene composite was used as n-type photoactive semiconductor material. In the presence of the kanamycin, strand displacement reaction was triggered and the p-type CuInS₂ quantum dots labeled aptamer was introduced on the Au NPs@MgIn₂S₄-graphene surface. The CuInS₂ quantum dots can competitive consume the electron donors (AA) and light energy of the PEC system, thus quenched the anodic photocurrent of Au NPs@MgIn₂S₄-graphene. The photocurrent decreased with the increase of kanamycin concentration. The linear range of kanamycin was 1.0 pM-10 μM, and the detection limit was 1.7 pM. In addition, the method can be used for the determination of kanamycin in milk and honey.

Application strategies of peptide nucleic acids toward electrochemical nucleic acid sensors

Peptide nucleic acids (PNAs) have attracted tremendous interest in the fabrication of highly sensitive electrochemical nucleic acid biosensors due to their higher stability and increased sensitivity than common DNA probes. The neutral pseudopeptide backbone of PNAs not only makes the PNA/DNA duplexes more stable but also provides many opportunities to construct ultrasensitive nucleic acid sensors. This review presents the details of various protocols for the construction of PNA-based electrochemical nucleic acid sensors. The crucial factors, origin, and development of PNA, immobilization methods of PNA probes and signal generation mechanisms, are discussed. This review aims to provide a reference for ultrasensitive PNA electrochemical biosensor preparation.

Proton-Regulated Catalytic Activity of Nanozymes for Dual-Modal Bioassay of Urease Activity

Benefiting from the merits of high stability and superior activity, nanozymes are recognized as promising alternatives to natural enzymes. Despite the great leaps in the field of therapy and colorimetric sensing, the development of highly sensitive nanozyme-involved photoelectrochemical (PEC) biosensors is still in its infancy. Specifically, the investigation of multifunctional nanozymes facilitating different catalytic reactions remains largely unexplored due to the difficulty in synergistically amplifying the PEC signals. In this work, mesoporous trimetallic AuPtPd nanospheres were synthesized with both efficient oxidase and peroxidase-like activities, which can synergistically catalyze the oxidation of 4-chloro-1-naphthol to produce benzo-4-chlorohexadienone precipitation on the surface of photoactive materials, and thus lead to the decreased photocurrent as well as increased charge-transfer resistance. Inspired by the proton-dependent catalytic activity of nanozymes, a self-regulated dual-modal PEC and electrochemical bioassay of urease activity was innovatively established by in situ regulating the activity of AuPtPd nanozymes through urease-mediated proton-consuming enzymatic reactions, which can remarkably improve the accuracy of the assay. Meanwhile, the determination of urease activity in spiked human saliva samples was successfully realized, indicating the reliability of the biosensor and its application prospects in clinical diagnosis.

Sensitive and selective determination of trace amounts of mercury ions using a dimercaprol functionalized graphene quantum dot modified glassy carbon electrode

A novel nanomaterial is synthesized based on the functionalization of graphene quantum dot with dimercaprol (GQD-DMC). Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (TEM) are used to approve the successful synthesis of GQD-DMC. The synthesized nanomaterial is used as an electrode modifier for the sensitive and selective determination of mercury(ii) ions in real water samples. The method of evaluation is based on the pre-concentration of mercury ions on the GQD-DMC modified glassy carbon electrode, reduction of Hg(ii), and anodic stripping voltammetric measurement of these reduced ions in a buffer solution. The pre-concentration of mercury ions is driven by the affinity interaction between the surface containing functional groups of DMC and Hg(ii) ions. The GQD-DMC modified glassy carbon electrode (GQD-DMC/GCE) shows extra sensitivity and selectivity for mercury(ii) detection, which is assumed to be due to the increased surface area as well as the presence of sulfur-containing functional groups on the modified structure.

Photoelectrochemical detection of human epidermal growth factor receptor 2 (HER2) based on Co3O4-ascorbic acid oxidase as multiple signal amplifier

A sensitive photoelectrochemical (PEC) sensor based on hexagonal carbon nitride tubes (HCNT) as photoactive material was prepared for the detection of human epidermal growth factor receptor 2 (HER2). Magnetic Fe₃O₄ nanospheres (MNs) modified with anti-HER2 antibodies were employed for highly efficient capture of HER2 from serum sample, and Co₃O₄ nanoparticles (Co₃O₄ NPs) modified with ascorbic acid oxidase (AAO) as well as HER2 aptamer were used for signal amplification. When the aptamer-Co₃O₄-AAO probe was captured onto the electrode surface through the specific binding of the aptamer with HER2, the photocurrent intensity decreased. This was because Co₃O₄ NPs competed with HCNT for consumption of the excitation energy. As a consequence AAO catalyzed the oxidation of the electron donor (AA), and the aptamer-Co₃O₄-AAO probe increased the steric hindrance at the electrode surface, leading to significant photocurrent intensity decrease, thus realizing multiple signal amplification. Based on this signal amplification strategy, at 0 V (vs Ag/AgCl), the PEC sensor shows a wide linear response ranging from 1 pg mL^-1 to 1 ng mL^-1 with a low detection limit of 0.026 pg mL^-1 for HER2. Importantly, the prepared PEC sensor was applied for detection of HER2 in human serum samples with recoveries between 98.8 and 101%. Sensitive photoelectrochemical sensor based on Co₃O₄ nanoparticles modified with ascorbic acid oxidase for signal amplification is reported.

Metal Nanoparticle and Quantum Dot Tags for Signal Amplification in Electrochemical Immunosensors for Biomarker Detection

With the increasing importance of healthcare and clinical diagnosis, as well as the growing demand for highly sensitive analytical instruments, immunosensors have received considerable attention. In this review, electrochemical immunosensor signal amplification strategies using metal nanoparticles (MNPs) and quantum dots (Qdots) as tags are overviewed, focusing on recent developments in the ultrasensitive detection of biomarkers. MNPs and Qdots can be used separately or in combination with other nanostructures, while performing the function of nanocarriers, electroactive labels, or catalysts. Thus, different functions of MNPs and Qdots as well as recent advances in electrochemical signal amplification are discussed. Additionally, the methods most often used for antibody immobilization on nanoparticles, immunoassay formats, and electrochemical methods for indirect biomarker detection are overviewed.

Single-Atom-Based Heterojunction Coupling with Ion-Exchange Reaction for Sensitive Photoelectrochemical Immunoassay

Benefiting from the maximum atom-utilization efficiency and distinct structural features, single-atom catalysts open a new avenue for the design of more functional catalysts, whereas their bioapplications are still in their infancy. Due to the advantages, platinum single atoms supported by cadmium sulfide nanorods (Pt SAs-CdS) are synthesized to build an ultrasensitive photoelectrochemical (PEC) biosensing platform. With the decoration of Pt SAs, the PEC signal of CdS is significantly boosted. Furthermore, theory calculations indicate the positively charged Pt SAs could change the charge distribution and increase the excited carrier density of CdS. Meanwhile, it also suggests that Cu²⁺ can severely hinder the photoexcitation and electron-hole separation of CdS. As a proof of concept, prostate-specific antigen is chosen as the target analyte to demonstrate the superiority of the Pt SAs-CdS-based PEC sensing system. As a result, the PEC biosensor based on Pt SAs-CdS exhibits outstanding detection sensitivity and promising applicability.

Chemical-chemical redox cycling amplification strategy in a self-powered photoelectrochemical system: a proof of concept for signal amplified photocathodic immunoassay

A chemical-chemical redox cycling amplification strategy was introduced into a photocathodic immunosensing system. To prove the applicability of the method, a novel self-powered photochemical system by integrating the photoanode and photocathode was designed for protein analysis.

Polydopamine nanospheres with multiple quenching effect on TiO2/CdS:Mn for highly sensitive photoelectrochemical assay of tumor markers

A photoelectrochemical (PEC) immunosensing strategy based on the multiple quenching of polydopamine nanoparticles (PDA NPs) to Mn²⁺-doped CdS-modified TiO₂ nanoparticles (TiO₂/CdS:Mn) was designed for the highly sensitive detection of carcinoembryonic antigen (CEA). The uniform PDA NPs possessed good dispersibility, good biocompatibility, and abundant functional groups for biomolecule assembly. They also had unique photophysical properties, with light absorption spanning the visible to infrared light range. When the immune-recognition brought the PDA NPs close to the TiO₂/CdS:Mn interface, the PDA NPs competed with TiO₂/CdS:Mn to absorb light, consumed photoelectrons generated in the TiO₂/CdS:Mn, and hindered the access of electron donors to photoactive materials. The contribution from these aspects thus led to a significant decrease in photocurrent. Benefiting from the multiple quenching mechanism, the PEC immunosensor showed high sensitivity for CEA detection. Under optimal conditions, a low detection limit of 0.02 pg/mL and a wide linear relationship from 0.1 pg/mL to 100 ng/mL were obtained. The immunoassay showed good reproducibility and stability, and good selectivity and high accuracy in serum sample analysis. In this regard, PEC immunosensors may have great application potential for screening tumor markers and the prevention and monitoring of serious diseases.

Separation of Biological Events from the Photoanode: Toward the Ferricyanide-Mediated Redox Cyclic Photoelectrochemical System of an Integrated Photoanode and Photocathode

Photoanode sensing platforms with remarkable photoelectrochemical (PEC) response and satisfying visible-light absorption have become the most promising detection systems. Nevertheless, their inevitable electrophilic character limits their expansion in the bioassay because of reductive substances in serum or other body fluids that can severely interfere with the photocurrent to be read. To solve it, a PEC platform-assembled dual-active electrode is designed to realize the separation of biological monitoring from the photoanode. The ferricyanide ([Fe(CN)₆]^3-)-mediated redox cycle is first proposed to meet the gain and loss electron requirements of the PEC system. It can avoid the self-reaction in the electrolyte caused by the addition of a traditional electron donor and acceptor, for instance, ascorbic acid and hydrogen peroxide. As a consequence, the traditional counter electrode (Pt wire) is replaced by Fe₂O₃/AgInS₂ heterojunction, which can amplify the PEC response of the cathode to meet the requirement of trace analysis. An aptasensor fabricated by the above strategies exhibits convincing data for 17β-estradiol (E2) detection from which a wide detection range is obtained in 10 fg/mL to 1 μg/mL with a detection limit of 2.74 fg/mL (S/N = 3). These advanced elements show a rosy prospect for environmental monitoring and point-of-care biomarker diagnosis.

Platinum-based nanocomposite as oxygen reduction catalyst for efficient signal amplification: Toward building of high-performance photocathodic immunoassay

Photocathodic bioassays have shown great potential to apply in real bio-sample detection owning to their intrinsic abilities against interference from reductive species. However, the pursuit of photocathodic bioassays with excellent detection performance is still in the infancy. Herein, an advanced signal amplifier of platinum-based nanocatalyst with efficient oxygen reduction capability was explored to build a high-performance photocathodic immunoassay. The target model of carbohydrate antigen 19-9 (CA19-9, Ag) was used for describing the sensing platform. Specifically, the nontoxic Au/CuBi₂O₄ photocathode was first prepared by decorating Au nanoparticles on CuBi₂O₄ nanofilm and was used as the matrix to anchor capture CA19-9 antibody (Ab₁). Platinum (Pt) nanoparticles were loaded on graphene (GR) nanosheet to form Pt/GR nanocomposite, which was utilized as signal amplifier conjugating with signal CA19-9 antibody (Ab₂). When specific sandwich immunoreaction happened, the Pt/GR played the role of an efficient nanocatalyst to accelerate the reduction reaction of electron acceptor of oxygen in the electrolyte, causing evidently enhanced cathodic photocurrent signal. By incorporating this superior signal amplification strategy into the anti-interference photocathodic immunoassay, highly sensitive and specific detection of target Ag was realized. This work pioneers a new perspective for the design of advanced photocathodic bioanalysis for various targets of interest.

Core-shell structured cadmium sulfide nanocomposites for solar energy utilization

Solar energy utilization technologies have been widely explored to solve the global energy crisis because the inexhaustible solar energy can be converted into chemical fuel and electricity. Various semiconductors that are crucial for solar energy utilization have been extensively developed. Among them, cadmium sulfide (CdS) has attracted extensive attention due to its suitable band-gap and excellent electrical/optical properties. However, CdS is still limited by rapid charge recombination, instability and low quantum efficiency. Core-shell structures can provide great opportunities for constructing advanced structures with superior properties to overcome the remaining challenges. This review focuses on the significant advances in core-shell structured CdS nanocomposites for solar energy utilization. Initially, the synthetic methods to construct core-shell structured CdS nanocomposites are reviewed. Then the applications in solar energy utilization are discussed, including photocatalytic\photoelectrochemical water splitting, photocatalytic CO₂ reduction and solar cells. Finally, the perspectives of core-shell structured CdS nanocomposites for solar energy utilization are proposed.

Photoelectrochemical aptasensor for thrombin based on Au-rGO-CuS as signal amplification elements

A photoelectrochemical platform for thrombin determination was developed based on Au-rGO-CuS as multiple signal amplification elements. CuInS₂ QDs was used to sensitize burr-shape TiO₂ (b-TiO₂) to obtain a strong photocurrent. Under the specific recognition between aptamer and thrombin, a sandwichlike structure was formed and the Au-rGO-CuS-labeled aptamer (S2@Au-rGO-CuS) was immobilized on the electrode surface. This induced a sharp decrease in photocurrent. The phenomenon is mainly due to the fact that CuS NPs can competitively consume the light energy and electron donor with CuInS₂/b-TiO₂. The rGO can increase the amount of CuS NPs and the Au NPs can accelerate charge transferring which depress the recombination of photogenerated electrons and holes in CuS to further enhance the competitive capacity of CuS. The sandwichlike structure has a steric hindrance effect. Therefore, the S2@Au-rGO-CuS has a multiple signal amplification function for thrombin determination. Under optimal conditions, the PEC aptasensor exhibited a wide linear concentration range from 0.1 pM to 10 nM with a low detection limit of 30 fM (S/N = 3) for thrombin. Besides, the designed aptasensor performed well in the assay of human serum sample, indicating good potential for the determination of thrombin in real samples. Graphical abstract.

Plasmonic Enhanced Gold Nanoclusters-Based Photoelectrochemical Biosensor for Sensitive Alkaline Phosphatase Activity Analysis

Low-toxicity gold nanoclusters-decorated Ag@SiO₂ (Au NCs-Ag@SiO₂) nanocomposites modified plasmonic photoelectrodes were first fabricated to improve the photoelectric properties of Au NCs and practical application in biological detection. Through adjusting distance between Au NCs and plasmonic silver nanoparticles (Ag NPs), the photocurrent intensity of Au NCs enhanced by 3.8 times attributed to strong competition between enhancement functions of hot electron transfer, local electric field, light scattering effects, and quenching functions of nonradiative energy transfer. Further comparison between experimental results and theoretical simulations were conducted to gain a deeper understanding toward the photoelectric enhancement mechanism. Moreover, Au NCs-Ag@SiO₂ nanocomposites was successfully applied to the construction of photoelectrochemical (PEC) biosensors for sensitively detecting alkaline phosphatase activity. This proposed PEC biosensor showed a wide linear range from 0.04 to 400 U·L^-1, and a low detection limit of 0.022 U·L^-1.

A ratiometric electrochemiluminescence method using a single luminophore of porous g-C3N4 for the ultrasensitive determination of alpha fetoprotein

In this work, we report a simple ratiometric electrochemiluminescence method for ultra-sensitive immunoanalysis.

A photoelectrochemical aptasensor for the detection of 17β-estradiol based on In2S3 and CdS co-sensitized cerium doped TiO2

In₂S₃ and CdS co-sensitized Ce doped TiO₂ optimized the transmission path of electrons.

A photoelectrochemical immunosensor based on CdS/CdTe-cosensitized SnO2 as a platform for the ultrasensitive detection of amyloid β-protein

An ultrasensitive label-free photoelectrochemical immunosensor was developed to detect amyloid β-protein based on CdS/CdTe-cosensitized SnO₂ nanoflowers.

Ultrasensitive Electrochemical Immunosensor Reveals the Existence of Silk Products on the Maritime Silk Road

The Maritime Silk Road was the major trade route between eastern and western civilizations in the Middle Ages. However, hardly any silk products have been found along the transoceanic trade route. Thus, the extrasensitive detection of silk relic traces has tremendous importance in research regarding the Maritime Silk Road. In this study, an electrochemical immunosensor based on a tailored monoclonal antibody and gold nanoparticles using the layer-by-layer self-assembly method was devised. The fabricated immunosensor demonstrated preeminent performance in the analysis of silk fibroin, with a linear detection range of 0.01-100 ng mL^-1 and a detection limit of 3.8 pg mL^-1. In particular, the performance of the immunosensor was excellent in the analysis of ancient silk samples, especially in the qualitative and quantitative detection of soil samples extracted from Nanhai No. 1 shipwreck archeological sites. The proposed electrochemical immunosensor proves the existence of silk products on the Maritime Silk Road and demonstrates enormous potential for studying the formation and development of the ancient transoceanic trading route.

Photoelectrochemical detection of circulating tumor cells based on aptamer conjugated Cu2O as signal probe

In this work, a sensitive and reliable photoelectrochemical (PEC) biosensor was proposed based on hexagonal carbon nitride tubes (HCNT) as photoactive material for detection of circulating tumor cells (CTCs). Magnetic Fe₃O₄ nanospheres (MNs) and Cu₂O nanoparticles (Cu₂O NPs) were utilized for highly efficient magnetic capture of CTCs and for signal amplification, respectively. First, anti-epithelial cell adhesion molecule (EpCAM) antibody was linked onto MNs for capture and enrichment of CTCs. With the captured MCF-7 coated onto the electrode, the photocurrent intensity of HCNT was decreased due to the steric hindrance derived from MCF-7. Then, when the Cu₂O-aptamer probe was bound onto the CTC surface, the photocurrent intensity was further decreased because Cu₂O NPs competed with HCNT for absorption of exciting light and the aptamer molecules increased the steric hindrance, which leads to significantly decreased photocurrent response, thus realizing dual signal amplification. Using the breast cancer cell MCF-7 as a model, the proposed PEC biosensor displays good performances with a linear range from 3 to 3000 cell mL^-1 and limit of detection down to 1 cell mL^-1. The HCNT-based PEC biosensor shows good performance for detection of CTCs, which may have potential applications in cancer diagnostics and therapeutics.

Quantum Dots for Monitoring Choline Consumption Process of Living Cells via an Electrostatic Force-Mediated Energy Transfer

In this work, a ratiometric nanoprobe CdS/ZnS-FB was designed for H₂O₂ detection based on FRET assay. Furthermore, CdS/ZnS-FB could work for detecting choline (Ch) and acetylcholine (ACh) since H₂O₂ is the enzyme cascade reaction product. Significantly, the Jurkat T's choline consumption could also be quantitatively measured by monitoring FRET ratio (I₅₂₂/I₄₂₆). Thus, the biosensor could be applied as a universal tool for the detection of choline consumption of living cells, which provides a good potential for the applications in detecting chemical transmitter and cancer diagnosis.