Proximity Binding and Metal Ion-Dependent DNAzyme Cyclic Amplification-Integrated Aptasensor for Label-Free and Sensitive Electrochemical Detection of Thrombin

Target-promoted autocatalytic hairpin assembly of bivalent DNAzymes for sensitive and label-free electrochemical metallothionein assay

Metallothionein (MT) has shown to be an important biomarker for environmental monitoring and various diseases, due to its significant binding ability to heavy metal ions. On the basis of such a characteristic and the Hg2+-stabilized DNA duplex (Hg2+-dsDNA) probe, as well as a new autocatalytic hairpin assembly (aCHA)/DNAzyme cascaded signal enhancement strategy, the construction of a highly sensitive and label-free electrochemical MT biosensor is described. Target MT molecules bind Hg2+ in Hg2+-dsDNA to disrupt the duplex structure and to release ssDNA sequences, which trigger subsequent aCHA for efficient production of mimic aCHA triggering strands and many bivalent DNAzymes. The signal hairpins on the electrode are then cyclically cleaved by DNAzyme amplification cascade to liberate plenty G-quadruplex sequences, which bind hemin and yield largely enhanced currents for sensitive assay of MT with a detection limit of 0.217 nM in a label-free approach. Such sensor also shows selective discrimination capability to MT against other interfering proteins and assay of MT in normal serums with dilution has also been verified, indicating its potential for highly sensitive detection of different heavy metal ion binding molecules for various application scenarios.

A novel electrochemiluminescence biosensor based on Ru(bpy)32+-functionalized MOF composites and cycle amplification technology of DNAzyme walker for ultrasensitive detection of kanamycin

An electrochemiluminescence (ECL) sensing platform for ultrasensitive and highly selective detection of kanamycin (KANA) was developed based on the prepared Ru(bpy)32+-functionalized MOF (Ru@MOF) composites by hydrothermal synthesis and Ag+-dependent DNAzyme. In this sensor, the stem-loop DNA (HP) with the ferrocene (Fc) was used as substrate chain to quench the ECL emission generated by the Ru@MOF. Using the specific recognition effect between KANA and the KANA aptamer (Apt) and the DNAzyme dependence on Ag+, the KANA aptamer as the pendant strand of the DNAzyme was assembled on Ru@MOF/GCE with the aptamer. When both Ag+ and KANA were present simultaneously, KANA specifically was binded to KANA aptamer as a pendant chain. Subsequently, Ag+-dependent DNAzyme walker continuously cleaved the HP chain and released the modified end of Fc to restore the ECL signal of Ru@MOF composites, thus achieving selective and ultrasensitive detection of KANA. The constructed KANA biosensor exhibits a wide detection range (30 pM to 300 μM) accompanied by a low detection limit (13.7 pM). The KANA in seawater and milk samples are determined to evalute the practical application results of the sensor. This ECL detection strategy could be used for detecting other similar analytes and has broad potential application in biological analysis.

Emerging nanotechnology for Alzheimer's disease: From detection to treatment

Alzheimer's disease (AD), one of the most common chronic neurodegenerative diseases, is characterized by memory impairment, synaptic dysfunction, and character mutations. The pathological features of AD are Aβ accumulation, tau protein enrichment, oxidative stress, and immune inflammation. Since the pathogenesis of AD is complicated and ambiguous, it is still challenging to achieve early detection and timely treatment of AD. Due to the unique physical, electrical, magnetic, and optical properties of nanoparticles (NPs), nanotechnology has shown great potential for detecting and treating AD. This review provides an overview of the latest developments in AD detection via nanotechnology based on NPs with electrochemical sensing, optical sensing, and imaging techniques. Meanwhile, we highlight the important advances in nanotechnology-based AD treatment through targeting disease biomarkers, stem-cell therapy and immunotherapy. Furthermore, we summarize the current challenges and present a promising prospect for nanotechnology-based AD diagnosis and intervention.

Washing-Free Electrochemiluminescence Biosensor for the Simultaneous Determination of N6 Methyladenosines Incorporating a Tri-Double Resolution Strategy

We propose a novel washing-free electrochemiluminescence (ECL) biosensor for the simultaneous detection of two types of N6 methyladenosines-RNAs (m6A-RNAs), which are potential cancer biomarkers, on the basis of binding-induced DNA strand displacement (BINSD). The biosensor integrated a tri-double resolution strategy that combined spatial and potential resolution, hybridization and antibody recognition, and ECL luminescence and quenching. The biosensor was fabricated by separately immobilizing two ECL reagents (gold nanoparticles/g-C3N4 nanosheets and ruthenium bipyridine derivative/gold nanoparticles/Nafion) and the capture DNA probe on the two sections of glassy carbon electrode. As a proof of concept, m6A-Let-7a-5p and m6A-miR-17-5p were chosen as model analytes, while m6A antibody-DNA3/ferrocene-DNA4/ferrocene-DNA5 was designed as an m6A-binding probe and DNA6/DNA7 was designed as a hybridization probe with DNA3 to release the quenching probes ferrocene-DNA4/ferrocene-DNA5. The recognition process led to the quenching of the ECL signals from both probes via BINSD. The proposed biosensor has the advantage of being washing-free. The ECL methods using the fabricated ECL biosensor with the designed probes exhibited a low detection limit of 0.03 pM for two m6A-RNAs and high selectivity. This work reveals that this strategy is promising for developing an ECL method for the simultaneous detection of two m6A-RNAs. The proposed strategy could be expanded to develop the analytical methods for the simultaneous detection of other RNA modifications by changing the antibody and hybridization probe sequences.

A novel biosensor based on a bio-barcode for the detection of Mycobacterium tuberculosis

Tuberculosis (TB), the second (after COVID-19) deadliest infectious killer, is a chronic infectious disease caused by infection with Mycobacterium tuberculosis (M.T.), where early diagnosis and management are the key to containing the condition. Here, we report a novel biosensor for the detection of M.T. DNA based on magnetic separation, urease catalysis and silicon nanowire field effect transistor (SiNW FET) detection. M.T. DNA is sequence-specifically captured by magnetic nanoparticles and urease-labelled silica nanoparticles simultaneously to form a sandwich complex and urea is catalyzed into ammonium carbonate by urease modified on a sandwich complex. By using SiNW FET, the detection of M.T. DNA is realized indirectly by the detection of ammonium carbonate. The limit of detection (LOD) was determined to be 78.541 fM. The specificity of the biosensor was confirmed by detecting a panel of bacterial species. The utility of the biosensor was demonstrated in real-sample analysis and the recovery study of M.T. DNA was done in the genomic DNA extracted from cultured Mycobacterium tuberculosis. The biosensor holds promise to become a rapid, sensitive and accurate method for clinical diagnosis.

Target-activated multivalent sensing platform for improving the sensitivity and selectivity of Hg2+ detection

Sensitivity and selectivity are critical parameters to evaluate the performance of sensors. For trace detection, it remains a challenge to design a new sensor that achieves high sensitivity and selectivity simultaneously. Here, we present a target-activated dual Mg²⁺-dependent DNAzyme (MNAzyme) that served as a simple sensing model to explore the multivalency in improving the analytical sensitivity and selectivity for target detection. Mercury ion (Hg²⁺), a notorious toxic metal ion, was selected as a model target. In the presence of Hg²⁺, the thymine-rich regions of the hairpin probe and primer could hybridize to form a stable duplex via the thymine-Hg²⁺-thymine structure. Then, an intact enzyme sequence was exposed and two separate enzyme fragments were close to each other, generating a dual MNAzyme. Benefiting from the localized high-concentration of the enzyme strand, the dual MNAzyme showed a remarkable improvement in binding stability. The catalytic rate constant of the dual MNAzyme was theoretically 1.60 times higher than that of the monomeric counterpart, and the sensitivity and selectivity had 4.50 and 1.44-fold enhancement, respectively. When the dual MNAzyme was used for sensor applications, the limit of detection was determined to be 0.04 and 0.2 nM via UV-vis spectrophotometer and naked eye, respectively. Meanwhile, the method offered desirable selectivity toward Hg²⁺ against other metal ions. With the advantages of simple operation, high sensitivity, and desirable selectivity, the developed multivalent sensing platform could be easily expanded in the future for the on-site detection of other low-abundance analytes.

Electrochemical DNAzyme-based biosensors for disease diagnosis

DNAzyme-based electrochemical biosensors provide exceptional analytical sensitivity and high target recognition specificity for disease diagnosis. This review provides a critical perspective on the fundamental and applied impact of incorporating DNAzymes in the field of electrochemical biosensing. Specifically, we highlight recent advances in creating DNAzyme-based electrochemical biosensors for diagnosing infectious diseases, cancer and regulatory diseases. We also develop an understanding of challenges around translating the research in the field of DNAzyme-based electrochemical biosensors from labs to clinics, followed by a discussion on different strategies that can be applied to enhance the performance of the currently existing technologies to create truly point-of-care electrochemical DNAzyme biosensors.

Recent advances in electrochemical proximity ligation assay

Proximity ligation assay (PLA) is a vigorously developed homogeneous immunoassay assisted by DNA combining dual recognition of target protein by pairs of proximity probes, in which the detection of protein is tactfully converted to the detection of DNA. The booming developments in PLA have enabled a variety of ultrasensitive assays for the detection of protein and this concept of PLA is also extended to the detection of nucleic acids and some small molecule. The association between PLA and electrochemical method, defined as electrochemical proximity ligation assay (ECPLA), has gained much interests in disease diagnosis, food safety and environmental assays with the advantages, such as broad range of targets, simplicity, low cost and rapid response. In this review, we took a different perspective to present the history of PLA, the classical ECPLA biosensing methodology as well as the developments of ECPLA based on several key parameters, such as sensitivity, selectivity, reusability and generalization. In addition, the developments of PLA with electrochemiluminescence as readout are also presented. Finally, perspective and some unresolved challenges in ECPLA that can potentially be addressed have also been discussed.

A Novel Fluorescent Aptamer Sensor with DNAzyme Signal Amplification for the Detection of CEA in Blood

Carcinoembryonic antigen (CEA) is a tumor-specific biomarker; however, its low levels in the early stages of cancer make it difficult to detect. To address the need for analysis of ultra-low-level substances, we designed and synthesized a fluorescent aptamer sensor with DNAzyme signal amplification and used it for the detection of CEA in blood. In the presence of the target protein, the aptamer sequence in the recognition probe binds to the target protein and opens the hairpin structure, hybridizes with the primer and triggers a polymerization reaction in the presence of polymerase to generate double-stranded DNA with two restriction endonuclease Nb.BbvCl cleavage sites. At the same time, the target protein is displaced and continues to bind to another recognition probe, triggering a new round of polymerization reaction, forming a cyclic signal amplification triggered by the target. The experimental results show that the blood detection with CEA has a high sensitivity and a wide detection range. The detection range: 10 fg/mL~10 ng/mL, with a detection limit of 5.2 fg/mL. In addition, the sensor can be used for the analysis of complex biological samples such as blood.

An off-on fluorescence aptasensor for trace thrombin detection based on FRET between CdS QDs and AuNPs

An off-on fluorescence aptasensor was developed for trace thrombin detection based on fluorescence resonance energy transfer (FRET) between CdS QDs and gold nanoparticles (AuNPs). Using DNA pairwise hybridization of the aptamer to the complementary DNA (cDNA), the CdS QDs (energy donor) were tightly coupled to the AuNPs (energy acceptor), resulting in the occurrence of FRET and there was a dramatic fluorescence quenching of CdS QDs (turn off). When the thrombin was added to the fluorescence aptasensor, the specific binding of the aptamer to the target formed a G-quadruplex that caused the AuNPs receptor to detach and the DNA duplex to be disassembled. The process would inhibit the FRET which contribute to the recovery of fluorescence (turn on) and an "off-on" fluorescence aptasensor for thrombin detection was constructed accordingly. Under optimal conditions, the fluorescence recovery showed good linearity with the concentration of thrombin in the range of 1.35-54.0 nmol L-1, and the detection limit was 0.38 nmol L-1 (S/N = 3, n = 9). Importantly, the fluorescence aptasensor presented excellent specificity for thrombin, and was successfully applied to the quantitative determination of thrombin in real serum with satisfactory recoveries of 98.60-102.2%.

A recent advancement on the applications of nanomaterials in electrochemical sensors and biosensors

Industrialization and globalization, both on an international and local scale, have caused large quantities of toxic chemicals to be released into the environment. Thus, developing an environmental pollutant sensor platform that is sensitive, reliable, and cost-effective is extremely important. In current years, considerable progress has been made in the expansion of electrochemical sensors and biosensors to monitor the environment using nanomaterials. A large number of emerging biomarkers are currently in existence in the biological fluids, clinical, pharmaceutical and bionanomaterial-based electrochemical biosensor platforms have drawn much attention. Electrochemical systems have been used to detect biomarkers rapidly, sensitively, and selectively using biomaterials such as biopolymers, nucleic acids, proteins etc. In this current review, several recent trends have been identified in the growth of electrochemical sensor platforms using nanotechnology such as carbon nanomaterials, metal oxide nanomaterials, metal nanoparticles, biomaterials and polymers. The integration strategies, applications, specific properties and future projections of nanostructured materials for emerging progressive sensor platforms are also observed. The objective of this review is to provide a comprehensive overview of nanoparticles in the field of electrochemical sensors and biosensors.

Size-Controllable DNA Origami-Stacked Gold Nanoparticles for Deep Tumor-Penetrating Therapy

With the rapid development of nanotechnology, researchers have designed a variety of intelligent nanodelivery systems to enhance tumor targeting of anticancer drugs. However, increased tumor accumulation does not indicate deeper penetration in the tumor tissue, without which the tumor cells in the core area cannot be sufficiently killed. Herein, we develop a size-controllable nanoparticle system for deep-penetrating cancer therapy, which will be programmably disassembled with the decrease of the pH from the normal tissue to the tumor microenvironment and to the intracellular area. The integrated nanoparticle is composed of a gold nanoparticle (GNP, ∼30 nm) and a tetrahedral DNA nanostructure (TDN, ∼25 nm) loaded with doxorubicin (DOX). Initially, the nanoparticles maintain a larger size (∼100 nm) to accumulate in the tumor through the enhanced permeability and retention effect. At a pH of about 6.5 at the tumor microenvironment, with the linkage of DNA sequences converting into a triplex structure, the TDNs detach from the GNP and penetrate deeply into the tumor interstitium and then are internalized into the cells. Finally, in acidic lysosomes with pH 5.0, the TDNs release DOX by forming an i-motif structure. This nanosmart delivery system thus shows effective deep penetration into the tumor core with good antitumor efficacy and satisfactory biocompatibility and provides new insights into the development of intelligent nanosystems for anti-cancer treatment.

Aptamer-Based Sensors for Thrombin Detection Application

Thrombin facilitates the aggregation of platelet in hemostatic processes and participates in the regulation of cell signaling. Therefore, the development of thrombin sensors is conducive to comprehending the role of thrombin in the course of a disease. Biosensors based on aptamers screened by SELEX have exhibited superiority for thrombin detection. In this review, we summarized the aptamer-based sensors for thrombin detection which rely on the specific recognitions between thrombin and aptamer. Meanwhile, the unique advantages of different sensors including optical and electrochemical sensors were also highlighted. Especially, these sensors based on electrochemistry have the potential to be miniaturized, and thus have gained comprehensive attention. Furthermore, concerns about aptamer-based sensors for thrombin detection, prospects of the future and promising avenues in this field were also presented.

Biomolecule-guided co-localization of intermolecular G-rich strands for the construction of a tetramolecular G-quadruplex sensing strategy

We herein introduce the principle of proximity assay into tetramolecular G-quadruplexes guided by various biomolecules for the construction of a sensing strategy. Our strategy is based on the co-localization of intermolecular G-rich strands guided by a recognition event of a specific biomolecule to its corresponding affinity ligand. In such case, the local concentration among intermolecular strands is significantly increased to trigger the following self-assembly that served as the peroxidase-mimicking activity. This strategy is versatile, homogenous and adaptable to different types of biomolecules.

Recent Progress and Perspectives on Cell Surface Modification

The cell membrane is a biological interface consisting of phospholipid bilayer, saccharides and proteins that maintains a stable metabolic intracellular environment as well as regulating and controlling the exchange of substances inside and outside the cell. Cell membranes provide a highly complex biological surface carrying a variety of essential surfaces ligands and receptors for cells to receive various stimuli of external signals, thereby inducing corresponding cell responses regulating the life activities of the cell. These surface receptors can be manipulated via cell surface modification to regulate cellular functions and behaviors Thus, cell surface modification has attracted considerable attention due to its significance in cell fate control, cell engineering and cell therapy. In this minireview, we describe the recent developments and advances of cell surface modification, and summarize the main modification methods with corresponding functions and applications. Finally, the prospect for the future development of the modification of the living cell membrane is discussed.

Femtomolar Detection of Thrombin in Serum and Cerebrospinal Fluid via Direct Electrocatalysis of Oxygen Reduction by the Covalent G4-Hemin-Aptamer Complex

Thrombin, a serine protease playing a central role in the coagulation cascade reactions and a potent neurotoxin produced by injured brain endothelial cells, is a recognized cardiac biomarker and a critical biomarker for Alzheimer's disease development. Both in vivo and in vitro, its low physiological concentrations and nonspecific binding of other components of physiological fluids complicate electroanalysis of thrombin. Here, femtomolar levels of thrombin in serum and an artificial cerebrospinal fluid (CSF) were detected by the indicator-free electrochemical methodology exploiting the O₂ reduction reaction directly, with no electron transfer mediators, electrocatalyzed by the covalent G4-hemin DNAzyme complex naturally self-assembling upon thrombin binding to the hemin-modified 29-mer DNA aptamer sequence tethered to gold via an alkanethiol linker. Coadsorbed PEG inhibited nonspecific protein binding and allowed the sought signal resolution. The proposed assay exploiting the "oxidase" activity of G4-hemin DNAzyme does not require any coreactants necessary for the traditional peroxidase activity-based assays with this DNAzyme, such as H₂O₂ and redox mediators, or solution deaeration and allows fast, overall 30 min analysis of thrombin in aerated buffer, CSF, and 1% human serum solutions. This pioneer approach exploiting the oxidase activity G4-hemin DNAzyme is simple, sensitive, and selective and represents a new tool for ultrasensitive electrocatalytic assays based on simple and efficient O₂-dependent DNAzyme labels.

A Deoxyribozyme-Initiated Self-Catalytic DNA Machine for Amplified Live-Cell Imaging of MicroRNA

Functional DNA nanostructures have been widely used in various bioassay fields. Yet, the programmable assembly of functional DNA nanostructures in living cells still represents a challenging goal for guaranteeing the sensitive and specific biosensing utility. In this work, we report a self-catalytic DNA assembly (SDA) machine by using a feedback deoxyribozyme (DNAzyme)-amplified branched DNA assembly. This SDA system consists of catalytic self-assembly (CSA) and DNAzyme amplification modules for recognizing and amplifying the target analyte. The analyte initiates the CSA reaction, leading to the formation of Y-shaped DNA that carries two RNA-cleaving DNAzymes. One DNAzyme can then successively cleave the corresponding substrate and generate numerous additional inputs to activate new CSA reactions, thus realizing a self-catalytic amplification reaction. Simultaneously, the other DNAzyme is assembled as a versatile signal transducer for cleaving the fluorophore/quencher-modified substrate, leading to the generation of an amplified fluorescence readout. By incorporating a flexible auxiliary sensing module, the SDA system can be converted into a universal sensing platform for detecting cancerous biomarkers, e.g., a well-known oncogene microRNA-21 (miR-21). Moreover, the SDA system realized the precise intracellular miR-21 imaging in living cells, which is attributed to the reciprocal amplification property between CSA reactions and DNAzyme biocatalysis. This compact SDA amplifier machine provides a universal and facile toolbox for the highly efficient identification of cancerous biomarkers and thus holds great potential for early cancer diagnosis.

Construction of Aptamer-Based Molecular Beacons with Varied Blocked Structures and Targeted Detection of Thrombin

A kind of blocked aptamer-functionalized molecular beacon (MB) was designed as fluorescence sensors to detect thrombins by binding-induced "turn on" structural transformation. Three MBs named MB(8 + 8), MB(15 + 8), and MB(15 + 6) consisted of two single-stranded oligonucleotides. One long single-stranded oligonucleotide (abbreviated as SS) contained a thrombin aptamer sequence and was modified with a fluorescence group and quenching group on each end side. Another short single-stranded oligonucleotide (written as cDNA) was partially complementary to the long SS. It was interesting to find that the complementary sequence length of cDNA greatly influenced the structure of the MBs. The construction of MB experiments proved that MB(8 + 8) and MB(15 + 8) could form the quenching MBs but MB(15 + 6) could not. MB(8 + 8) was composed of a SS strand paired with a complementary cDNA(8 + 8), which was called one-to-one combination, while MB(15 + 8) was two-to-two combination and MB(15 + 6) was one-to-two combination. When the ratio of SS and cDNA (15 + 8) was 1:1, the quenching efficiency reached maximum. But with the molar ratio of SS and cDNA(8 + 8) increasing, the quenching efficiency increased continuously. Under the optimal conditions that we studied, the detection limit of thrombin by MB(8 + 8) and MB(15 + 8) was 0.19 and 1.2 nM, respectively. In addition, the assay proved to be selective, and the average recovery of thrombin detected by MB(8 + 8) and MB(15 + 8) in diluted serum was 95.4 and 94.5%, respectively.

DNA Assembly-Based Stimuli-Responsive Systems

Stimuli-responsive designs with exogenous stimuli enable remote and reversible control of DNA nanostructures, which break many limitations of static nanostructures and inspired development of dynamic DNA nanotechnology. Moreover, the introduction of various types of organic molecules, polymers, chemical bonds, and chemical reactions with stimuli-responsive properties development has greatly expand the application scope of dynamic DNA nanotechnology. Here, DNA assembly-based stimuli-responsive systems are reviewed, with the focus on response units and mechanisms that depend on different exogenous stimuli (DNA strand, pH, light, temperature, electricity, metal ions, etc.), and their applications in fields of nanofabrication (DNA architectures, hybrid architectures, nanomachines, and constitutional dynamic networks) and biomedical research (biosensing, bioimaging, therapeutics, and theranostics) are discussed. Finally, the opportunities and challenges for DNA assembly-based stimuli-responsive systems are overviewed and discussed.

Photoelectrochemical aptasensing for thrombin based on exonuclease III-assisted recycling signal amplification and nanoceria enzymatic strategy

In the present work, a capture DNA (c-DNA) was immobilized on the TNA/g-C₃N₄ to develop a sensitive and selective TNA/g-C₃N₄/c-DNA photoelectrochemical aptasensor for determining thrombin. With the aid of the specific recognition of anti-thrombin aptamer towards thrombin, ingenious design of hairpin DNA, and exonuclease III-assisted recycling signal amplification, more nanoceria could be assembled on the TNA/g-C₃N₄/c-DNA to form TNA/g-C₃N₄/nanoceria in the presence of thrombin. Due to the oxidase-mimic catalytic efficiency of nanoceria and the oxygen consumption for glucose oxidation, the photoexcited electrons at the conduction band of g-C₃N₄ could be well transferred to that of TNA under visible light irradiation, resulting in the increase of the photocurrent of TNA/g-C₃N₄/nanoceria, and the increase value of photocurrent had a linear relationship with the concentration of thrombin under the optimal conditions. So, the constructed TNA/g-C₃N₄/c-DNA photoelectrochemical aptasensor exhibited a satisfactory quantitative range from 0.01 pM to 0.5 nM, low detection limit with 3.4 fM for thrombin determination, and was applied for the human serum analysis successfully with RSD of less than 4.8% and the recovery between 95% and 113%.

A general scattering proximity immunoassay with the formation of dimer of gold nanoparticle

In this work, we structured a colorimetric ultrasensitive detection of carcinoembryonic antigen (CEA) based on a proximity hybridization-induced gold nanoparticles (Au NPs) dimers structure. Under the dark-field microscope, this method takes advantage of the distinctive and strong distance-relative localized surface plasmon resonance (LSPR) of Au NPs and their oriented assembly. DNA served as a medium showing wonderful flexibility to label antibody and Au NPs, and tune interparticle spacing as well. Two capture probes were formed by the integration of DNA labeled antibody (DNA1-Ab1 or DNA2-Ab2) and asymmetrically assembled DNA (DNA 3 or DNA 4)- Au NPs via partly hybridization between DNA sequences. In the presence of antigen, the reaction between target protein and capture probes could trigger the generation of immunocomplex which led to the proximity hybridization of the DNA1 and DNA2, and then change the distance of interparticle to form Au NP dimers and thus showed a different color under dark-field microscope. A limit of detection of 14.25 pg/mL was obtained for the detection of CEA, which indicated a promising sensing method in clinical diagnosis of protein biomarkers.

Proximity hybridization triggered hybridization chain reaction for label-free electrochemical homogeneous aptasensors

A label-free homogeneous electrochemical aptasensor was developed for detection of thrombin based on proximity hybridization triggered hybridization chain reaction induced G-quadruplex formation. Thrombin promoted the formation of a complex via the proximity hybridization of the aptamer DNA strands, which unfolded the molecular beacon, the stem part of molecular beacon as a primer to initiate the hybridization chain reaction process. Thus, with the electrochemical indicator hemin selectively intercalated into the multiple G-quadruplexes, a significant electrochemical signal drop is observed, which is dependent on the concentration of the target thrombin. Thus, using this"signal-off" mode, label-free homogeneous electrochemical strategy for sensitive thrombin assay with a detection limit of 44 fM is realized. Furthermore, this method also exhibits additional advantages of simplicity and low cost, since both expensive labeling and sophisticated probe immobilization processes are avoided. Its high sensitivity, acceptable accuracy, and satisfactory versatility of analytes led to various applications in bioanalysis.

Rapid and colorimetric detection of nucleic acids based on entropy-driven circuit and DNAzyme-mediated autocatalytic reactions

In this work, a novel, rapid and enzyme-free colorimetric biosensor for the detection of nucleic acids has been developed based on entropy-driven (EDC) circuit and DNAzyme-mediated autocatalytic reactions. On sensing the target DNA, the EDC reaction could be initiated and the intact Mg2+-dependent DNAzyme was formed in the reaction product; then, a "mimic target" DNA was generated during the cleavage process of DNAzyme, which in turn catalyzed the EDC reaction corresponding to an autocatalytic process. Meanwhile, numerous G-quadruplex structures were released and further interacted with hemin to form peroxidase-mimicking DNAzyme, inducing a remarkably amplified colorimetric signal. This autocatalytic EDC (AEDC) sensing system exhibited a linear relationship in the range from 20 pM to 10 nM with a detection limit of 10.2 pM. More importantly, benefitting from the Mg2+-dependent DNAzyme-mediated autocatalytic reaction, the detection time (20 min) was significantly reduced compared to that for the reported EDC strategies. In addition, this sensing system has been applied for the detection of target DNA in human serum samples, indicating that it is promising for the on-site and real-time detection of nucleic acids in biomedical research and disease diagnosis.

In Situ-Generated Multivalent Aptamer Network for Efficient Capture and Sensitive Electrochemical Detection of Circulating Tumor Cells in Whole Blood

Monitoring circulating tumor cells (CTCs) in human blood can offer useful information for convenient metastasis diagnosis, prognosis, and treatment of cancers. However, it remains a substantial challenge to detect CTCs because of their particular scarcity in complex peripheral blood. Herein, we describe an in situ-generated multivalent aptamer network-modified electrode interface for efficiently capturing and sensitively detecting CTCs in whole blood by electrochemistry. Such an interface was fabricated via rolling circle amplification extension of the electrode-immobilized primer/circular DNA complexes for the yield of long ssDNA strands with many repeated aptamer segments, which could achieve efficient capture of rare CTCs in a multivalent cooperative manner. The antibody and horseradish peroxidase-functionalized gold nanoparticles further specifically associated with the surface-bound CTCs and generated electrocatalytically amplified current outputs for highly sensitive detection of CTCs with an attractive detection limit of five cells. Also, the multivalent aptamer network interface could successfully distinguish the target cells from other control cells and achieve CTC detection in whole blood, demonstrating its promising potential for monitoring different rare CTCs in human blood.

Cascaded multiple recycling amplifications for aptamer-based ultrasensitive fluorescence detection of protein biomarkers

Highly sensitive detection of molecular biomarkers plays a significant role in diagnosing various types of diseases at the early stage. We demonstrated in this paper an ultrasensitive aptamer-based fluorescence method for detecting mucin 1 (MUC1) in human serum via a cascaded multiple recycling signal amplification strategy. The MUC1 target molecules present in the samples cause structure switching of the hairpin aptamer probes, which initiates three cascaded recycling cycles for the cleavage of the fluorescently quenched signal probes to recover significant fluorescence for highly sensitive detection of MUC1. The developed method has a linear range from 100 fM to 1 nM for MUC1 detection. Besides, owing to the substantial signal amplification by the integrated and cascaded recycling cycles, a low detection limit of 35 fM is achieved with high selectivity. Moreover, the monitoring of trace MUC1 in human serum can also be realized with such a method, indicating its great potential for highly sensitive detection of different disease biomarkers.

Aptamer-Functionalized DNA Nanostructures for Biological Applications

DNA nanostructures hold great promise for various applications due to their remarkable properties, including programmable assembly, nanometric positional precision, and dynamic structural control. The past few decades have seen the development of various kinds of DNA nanostructures that can be employed as useful tools in fields such as chemistry, materials, biology, and medicine. Aptamers are short single-stranded nucleic acids that bind to specific targets with excellent selectivity and high affinity and play critical roles in molecular recognition. Recently, many attempts have been made to integrate aptamers with DNA nanostructures for a range of biological applications. This review starts with an introduction to the features of aptamer-functionalized DNA nanostructures. The discussion then focuses on recent progress (particularly during the last five years) in the applications of these nanostructures in areas such as biosensing, bioimaging, cancer therapy, and biophysics. Finally, challenges involved in the practical application of aptamer-functionalized DNA nanostructures are discussed, and perspectives on future directions for research into and applications of aptamer-functionalized DNA nanostructures are provided.

An anchored monopodial DNA walker triggered by proximity hybridization for amplified amperometric biosensing of nucleic acid and protein

This work designed an anchored monopodial DNA walker to amplify amperometric biosensing signal for sensitive detection of nucleic acid and protein. The biosensing surface was constructed by self-assembling hairpin DNA1 (H1) and small amount of P1-W (probe DNA1 hybridized with walking DNA) on a gold electrode. In the presence of target molecule, the walker could be triggered by the surface proximity hybridization product of P1, target and P2 to induce the cyclic hybridization of H1 with ferrocene modified hairpin DNA2 (H2-Fc), which took electroactive Fc to the electrode surface for amplified amperometric detection of the target. By linking P1 and P2 with dual specific DNA strands, aptamers or antibodies to recognize the target for proximity hybridization of P1 and P2, the walker amplified amperometric strategy could be used for highly sensitive biosensing of different targets. Using DNA and thrombin as the target models, the proposed biosensing methods achieved the linear range from 0.2 pM to 2 nM with a detection limit of 0.11 pM and 1.0 pM to 10 nM with a detection limit of 0.61 pM, respectively. The specific recognition process endowed the strategy with high selectivity and potential applications.

A highly sensitive electrochemical biosensor for protein based on a tetrahedral DNA probe, N- and P-co-doped graphene, and rolling circle amplification

A tetrahedral DNA probe can effectively overcome the steric effects of a single-stranded probe to obtain well-controlled density and minimize nonspecific adsorption. Herein, a highly sensitive electrochemical biosensor is fabricated for determination of protein using a tetrahedral DNA probe and rolling circle amplification (RCA). N- and P-co-doped graphene (NP-rGO) is prepared, and AuNPs are then electrodeposited on it for DNA probe immobilization. Benefitting from the synergistic effects of the excellent electrical conductivity of NP-rGO, the stability of the tetrahedral DNA probe and the signal amplification of RCA, the biosensor achieves a low limit of 3.53 × 10^-14 M for thrombin and a wide linear range from 1 × 10^-13 to 1 × 10^-7 M. This study provides a sensitive and effective method for the detection of protein in peripheral biofluids, and paves the way for future clinical diagnostics and treatment of disease. Graphical abstract.

Proximity-enabled bidirectional enzymatic repairing amplification for ultrasensitive fluorescence sensing of adenosine triphosphate

A novel fluorescence sensing strategy for ultrasensitive and highly specific detection of adenosine triphosphate (ATP) has been developed by the combination of the proximity ligation assay with bidirectional enzymatic repairing amplification (BERA). The strategy relies on proximity binding-triggered the release of palindromic tail that initiates bidirectional cyclic enzymatic repairing amplification reaction with the aid of polymerase and two DNA repairing enzymes, uracil-DNA glycosylase (UDG) and endonuclease IV (Endo IV). A fluorescence-quenched hairpin probe with a palindromic tail at the 3' end is skillfully designed that functions as not only the recognition element, primer, and polymerization template for BERA but also the indicator for fluorescence signal output. On the basis of the amplification strategy, this biosensor displays excellent sensitivity and selectivity for ATP detection with an outstanding detection limit of 0.81 pM. Through simultaneously enhancing the target response signal value and reducing nonspecific background, this work deducted the background effect, and showed high sensitivity and reproducibility. Moreover, our biosensor also shows promising potential in real sample analysis. Therefore, the proximity-enabled BERA strategy indeed creates a simple and valuable fluorescence sensing platform for ATP identification and related disease diagnosis and biomedical research.

Enhanced functional DNA biosensor for distance-based read-by-eye quantification of various analytes based on starch-hydrolysis-adjusted wettability change in paper devices

Low-cost, equipment-free and quantitative detection of a wide range of analytes of interest at home and in the field holds the potential to revolutionize disease diagnosis, environmental pollution monitoring, and food safety analysis. Herein, we describe a functional DNA biosensor for the first time that integrates analyte-directed assembly of enzyme-coated microbead probes for robust yet efficient signal amplification with a simple quantitative detection motif of distance measurement on portable paper devices based on starch-hydrolysis-adjusted wettability change of paper. Its utility is well demonstrated with highly sensitive and specific detection of model analytes ranging from adenosine (an important small biomolecule; 1.6 μM detection limit) to interferon-γ (a protein marker; 0.3 nM detection limit) and Pb²⁺ (a highly toxic metal ion; 0.5 nM detection limit) by simply using an inexpensive, ubiquitous ruler. The developed general method with the distance-measuring readout should be easily tailored for the portable, read-by-eye, quantitative detection of many other types of analytical targets by taking advantage of their specific functional DNA partners like aptamers and DNAzymes.

A functional DNA sensor was initially developed for the distance-measuring quantification of various analytes based on the starch-hydrolysis-adjusted wettability change of paper.

A "signal-on" electrochemical biosensor based on DNAzyme-driven bipedal DNA walkers and TdT-mediated cascade signal amplification strategy

In this work, a dual amplified signal enhancement approach based on coupling deoxyribozyme (DNAzyme)-driven bipedal DNA walkers (BDW) and terminal deoxynucleotidyl transferase (TdT)-mediated DNA elongation signal amplifications has been developed for highly sensitive and label-free electrochemical detection of thrombin in human serums. In presence of thrombin, the BDW complex, which is comprised from the target thrombin and two DNAzyme-containing probes, can exhibit autonomous cleavage behavior on the surface of the substrate DNA (SD) modified electrode, and remove the cleaved DNA fragment from the electrode surface. Subsequently, the TdT can catalyze the elongation of the SD with free 3'-OH termini and formation of many G-quadruplex sequence replicates with the presence of 2'-deoxyaguanosine-5'-triphosphate (dGTP) and adenosine 5'-triphosphate (dATP) at a molar ratio of 6:4. These G-quadruplex sequences bind hemin and generate drastically amplified current response for sensitive detection of thrombin in a "signal-on" and completely label-free fashion. Under optimized conditions, the response peak current was linear with the concentration of thrombin in the range from 0.5 pM to 100000 pM with detection limit of 0.31 pM. This research provides us a sustainable idea for the hyphenated multiple amplification strategies and a stable and effective method for the detection of protein biomarkers.

Polymerization nicking-triggered LAMP cascades enable exceptional signal amplification for aptamer-based label-free detection of trace proteins in human serum

Detecting molecular biomarkers in high sensitivity plays an important role in the diagnosis of various diseases at the early stage. Here, by combining the target-induced polymerization nicking reaction (TIPNR) with the loop-mediated isothermal amplification (LAMP), we describe an ultrasensitive and label-free aptamer-based sensing method for detecting low levels of proteins in human serum by using thrombin as the model target analyte. The target thrombin binds and causes spontaneous assembly of two distinct aptamer probes to form the templates for the polymerization nicking reaction recycling amplification to produce many forward inner primer sequences. Subsequently, downstream LAMP reactions are initiated by these sequences for the generation of tremendous DNA hairpins with various lengths via automated cyclic strand displacement reactions. The SYBR Green I organic dye further binds the many hairpins to show drastically amplified fluorescence for ultrasensitive detection of thrombin down to 3.6 fM in the linear range from 0.01 pM to 10 nM. Such a sensing method based on aptamers has high discrimination capability for the target molecules against other non-specific proteins and is applicable for diluted serum samples. With the successful demonstration of the substantial signal amplification ability and simplicity feature of this assay approach, highly sensitive and convenient detection of other disease biomarkers with this method can be envisioned in the near future.

The synergistic effect of Au-COF nanosheets and artificial peroxidase Au@ZIF-8(NiPd) rhombic dodecahedra for signal amplification for biomarker detection

Here, a new type of signal amplification strategy is proposed employing Au nanoparticle (AuNP)-functionalized covalent organic framework (Au-COF) nanosheets and AuNP functionalized ZIF-8(NiPd) (Au@ZIF-8(NiPd)) rhombic dodecahedra nanocomposites for sandwich electrochemical sensor construction. The peroxidase mimics Au@ZIF-8(NiPd) took the place of natural enzymes in enzyme-assisted amplification strategies, both acting as catalysts for H₂O₂ reduction for signal amplification, and serving as ideal nanocarriers for signal probe anchoring. The cancer biomarker thrombin (TB) was selected as the target. Thrombin binding aptamers (TBA 2) were fixed on Au@ZIF-8(NiPd), and the obtained TBA 2-Au@ZIF-8(NiPd) bioconjugates were employed as tracer labels, and TB was sandwiched between the tracer labels and capture probe TBA 1 which were immobilized on the Au-COF nanosheet modified electrode. Au-COFs with a high specific area, super electroconductivity, and uniformly distributed AuNPs were utilized as the electrode substrate to fix TBA 1. Exploiting the sandwich method, the proposed TB aptasensor exhibited a wide linear range of 0.1 pM to 20 nM with a low detection limit of 15 fM (S/N = 3). The ingenious sensing strategy enriched the application diversity of the artificial enzyme and showed promise in research and development of point-of-care diagnostics.

Functionalization of 8-17 DNAzymes modulates catalytic efficiency and divalent metal ion preference

8-17 and 17E DNAzyme are being explored as biosensors for metal ions and RNA motifs of interest, more sensitive and efficient DNAzymes are required to meet the practical applications. Their similarity in the catalytic cores and differences in catalytic efficiency and metal ion dependence initiated great interest about the contribution of the catalytic residues. Functionalization of four adenine residues in the catalytic cores of 8-17 DNAzyme and 17E was conducted with amino, guanidinium, and imidazolyl groups. In the bulge loops of 8-17 and 17E, N⁶-(3-aminopropyl)-2'-deoxyadenosine (residue 1) at A15 led to new DNAzymes 8-17DZ-A15-1 and 17E-A15-1, with much more efficient cleavage ability in the Ca²⁺-mediated reaction and the greater preference for Ca²⁺ over Mg²⁺ than 8-17 DNAzyme and 17E, respectively, especially with a concentration-dependent increase of the selectivity, which is different from most DNAzymes with the similar dependence on both Mg²⁺ and Ca²⁺. With this kind of post-selection modification on 8-17 DNAzymes, for the first time, the catalytic efficiency and metal ion selectivity could be positively modulated. It is also helpful for the catalyic mechanistic studies of these DNAzymes, especially, the role of the unconserved A15 should be emphasized.

A label-free IFN-γ aptasensor based on target-triggered allosteric switching of aptamer beacon and streptavidin-inorganic hybrid composites

A label-free electrochemical aptasensor was developed for the sensitive detection of interferon-gamma (IFN-γ). To do this, a diblock dual-aptamer allosteric hairpin (DDAH) was designed, followed by conjugation with gold nanoparticles (DDAH&AuNP). The presence of target destroyed the stable hairpin structure, and then the catalytic cleavage of DNAzymes removed the IFN-γ-binding molecules, triggering the allosteric switching from inactive hairpin to active streptavidin aptamer (A-DDAH&AuNP) in homogeneous system. Moreover, streptavidin-inorganic hybrid nanoflowers decorated with graphene composites (SFG) were synthesized and used as substrates to modify glassy carbon electrodes (SFG/GCE). SFG specifically bind to the A-DDAH&AuNP to realize high-efficient readout of signals. Under the optimal conditions and by using differential pulse stripping voltammetry (DPSV), the response peak currents increases linearly with the logarithm of the IFN-γ concentration in the range between 0.1 pg mL^-1 and 500 ng/mL. The detection limit is as low as 19 fg mL^-1. The aptasensor also has excellent electrochemical performances, which exhibits broad application prospects in biometric analysis.

One-step sensitive thrombin detection based on a nanofibrous sensing platform

Convenient and time-saving one-step strategies for detecting ultralow concentrations of protein biomarkers play key roles in rapid disease diagnosis. In this study, we report a one-step detection method based on a nanofibrous sensing platform via the combination of proximity-induced DNA strand displacement (PiDSD), catalytic hairpin assembly (CHA) amplification and thioflavin T (ThT) binding. The interface behaviors on the nanofibrous membrane were studied to promote interface reaction kinetics and thermodynamics. Thrombin was used as a model biomarker, and the nanofibrous sensing platform achieved a limit of detection as low as 1.0 pM, a wide linear range of 50 pM to 5 nM, excellent specificity and good long-term stability. Compared with previous one-step thrombin detection methods, our one-step detection method is label-free, convenient and much more sensitive; it has potential applications for protein detection in point-to-care testing (POCT) and early diagnosis.