Detection and Quantification of Hydrogen Peroxide in Aqueous Solutions Using Chemical Exchange Saturation Transfer

Model-based development of cell voltage control system for modified bio-electro-Fenton process

A modified bio-electro-Fenton (M-BEF) process with a cell voltage control system that improves the efficiency of organic removal and energy savings is demonstrated. The M-BEF process can accomplish bioelectricity generation, H2O2 production, and the Fenton reaction in a continuous-flow reactor. During synthetic wastewater treatment containing biodegradable (glucose) and recalcitrant (biphenyl) organic matter, the effluent chemical oxygen demand (COD) concentration was maintained between 2 and 6 mg L-1. To investigate the impact of different operating schemes on energy usage, model-based design (MBD) modeling and simulations were performed, which showed that COD removal efficiency without an external voltage supply was unstable at < 70 %. The automatic cell voltage control system saved 90 % of the power compared to the continuous cell voltage supply system. Further testing on more environmental samples and pollutants will enable real-time optimization of supplied power and wastewater treatment using the cell voltage control system.

Analytical and Structural Tools of Lipid Hydroperoxides: Present State and Future Perspectives

Mono- and polyunsaturated lipids are particularly susceptible to peroxidation, which results in the formation of lipid hydroperoxides (LOOHs) as primary nonradical-reaction products. LOOHs may undergo degradation to various products that have been implicated in vital biological reactions, and thus in the pathogenesis of various diseases. The structure elucidation and qualitative and quantitative analysis of lipid hydroperoxides are therefore of great importance. The objectives of the present review are to provide a critical analysis of various methods that have been widely applied, and more specifically on volumetric methods, applications of UV-visible, infrared, Raman/surface-enhanced Raman, fluorescence and chemiluminescence spectroscopies, chromatographic methods, hyphenated MS techniques, NMR and chromatographic methods, NMR spectroscopy in mixture analysis, structural investigations based on quantum chemical calculations of NMR parameters, applications in living cells, and metabolomics. Emphasis will be given to analytical and structural methods that can contribute significantly to the molecular basis of the chemical process involved in the formation of lipid hydroperoxides without the need for the isolation of the individual components. Furthermore, future developments in the field will be discussed.

Quantitative detection of hydrogen peroxide in rain, air, exhaled breath, and biological fluids by NMR spectroscopy

Hydrogen peroxide (H2O2) plays a key role in environmental chemistry, biology, and medicine. H2O2 concentrations typically are 6 to 10 orders of magnitude lower than that of water, making its quantitative detection challenging. We demonstrate that optimized NMR spectroscopy allows direct, interference-free, quantitative measurements of H2O2 down to submicromolar levels in a wide range of fluids, ranging from exhaled breath and air condensate to rain, blood, urine, and saliva. NMR measurements confirm the previously reported spontaneous generation of H2O2 in microdroplets that form when condensing water vapor on a hydrophobic surface, which can interfere with atmospheric H2O2 measurements. Its antimicrobial activity and strong seasonal variation speculatively could be linked to the seasonality of respiratory viral diseases.

NMR characterization of H2O2 hydrogen exchange

Quantification of H2O2 concentration in aqueous solutions is of interest in many fields. It usually is based on indirect methods that rely on oxidation reactions that turn on/off fluorescent probes. Such methods can suffer from reaction incompleteness and interfering chemical species. We describe optimization of NMR detection that enables direct quantification of H2O2 down to the nanomolar range. Taking advantage of fast hydrogen exchange (HX) between H2O2 and water permits the use of very short interscan delays, greatly increasing sensitivity. The specific acid-, base- and water-catalyzed HX rates at 2 °C were measured to be 2.1 × 107, 6.1 × 109, and 1.4 × 10-1 M-1s-1, respectively, which result in a minimum HX rate at pH 6.2. Furthermore, the exchange is accelerated by general acid/base catalysis. MES and phosphate buffers catalyze HX strongest in their unprotonated forms. For imidazole, only the unprotonated form catalyzes HX, which contrasts with acetic acid where only the protonated state catalyzes exchange. Inorganic salts such as sodium chloride and azide have negligible effect on HX. We present optimal conditions for accurate measurement of H2O2 concentrations as low as 40 nM in aqueous samples in a few hours.

Molecular Concentration Determination Using Long-Interval Chemical Exchange Inversion Transfer (CEIT) NMR Spectroscopy

Functionalized hyperpolarized xenon "cage" molecules have often been used for ultrasensitive detection of biomolecules and microenvironment properties. However, the rapid and accurate measurement of molecule concentration is still a challenge. Here, we report a molecule concentration measurement method using long-interval chemical exchange inversion transfer (CEIT) NMR spectroscopy. The molecule concentration can be quantitatively measured with only 2 scans, which shortens the acquisition time by about 10 times compared to conventional Hyper-CEST (chemical exchange saturation transfer) z-spectrum method. Moreover, we found that the accuracy of concentration determination would be the best when the CEIT effect is 1-1/e or close to it, and a relative deviation of CrA-(COOH)₆ less than ±1% has been achieved by only a one-step optimization of the number of cycles. The proposed method enables efficient and accurate determination of molecule concentration, which provides a potential way for rapid quantitative molecular imaging applications.

The Recent Progress on Silver Nanoparticles: Synthesis and Electronic Applications

Nanoscience enables researchers to develop new and cost-effective nanomaterials for energy, healthcare, and medical applications. Silver nanoparticles (Ag NPs) are currently increasingly synthesized for their superior physicochemical and electronic properties. Good knowledge of these characteristics allows the development of applications in all sensitive and essential fields in the service of humans and the environment. This review aims to summarize the Ag NPs synthesis methods, properties, applications, and future challenges. Generally, Ag NPs can be synthesized using physical, chemical, and biological routes. Due to the great and increasing demand for metal and metal oxide nanoparticles, researchers have invented a new, environmentally friendly, inexpensive synthetic method that replaces other methods with many defects. Studies of Ag NPs have increased after clear and substantial support from governments to develop nanotechnology. Ag NPs are the most widely due to their various potent properties. Thus, this comprehensive review discusses the different synthesis procedures and electronic applications of Ag NPs.

Chemical exchange saturation transfer for detection of antiretroviral drugs in brain tissue

OBJECTIVE

Antiretroviral drug theranostics facilitates the monitoring of biodistribution and efficacy of therapies designed to target HIV type-1 (HIV-1) reservoirs. To this end, we have now deployed intrinsic drug chemical exchange saturation transfer (CEST) contrasts to detect antiretroviral drugs within the central nervous system (CNS).

DESIGN AND METHODS

CEST effects for lamivudine (3TC) and emtricitabine (FTC) were measured by asymmetric magnetization transfer ratio analyses. The biodistribution of 3TC in different brain sub-regions of C57BL/6 mice treated with lipopolysaccharides was determined using MRI. CEST effects of 3TC protons were quantitated by Lorentzian fitting analysis. 3TC levels in plasma and brain regions were measured using ultraperformance liquid chromatography tandem mass spectrometry to affirm the CEST test results.

RESULTS

CEST effects of the hydroxyl and amino protons in 3TC and FTC linearly correlated to drug concentrations. 3TC was successfully detected in vivo in brain sub-regions by MRI. The imaging results were validated by measurements of CNS drug concentrations.

CONCLUSION

CEST contrasts can be used to detect antiretroviral drugs using MRI. Such detection can be used to assess spatial--temporal drug biodistribution. This is most notable within the CNS where drug biodistribution may be more limited with the final goal of better understanding antiretroviral drug-associated efficacy and potential toxicity.

Coloring ultrasensitive MRI with tunable metal-organic frameworks

As one of the most important imaging modalities, magnetic resonance imaging (MRI) still faces relatively low sensitivity to monitor low-abundance molecules. A newly developed technology, hyperpolarized ¹²⁹Xe magnetic resonance imaging (MRI), can boost the signal sensitivity to over 10 000-fold compared with that under conventional MRI conditions, and this technique is referred to as ultrasensitive MRI. However, there are few methods to visualize complex mixtures in this field due to the difficulty in achieving favorable “cages” to capture the signal source, namely, ¹²⁹Xe atoms. Here, we proposed metal–organic frameworks (MOFs) as tunable nanoporous hosts to provide suitable cavities for xenon. Due to the widely dispersed spectroscopic signals, ¹²⁹Xe in different MOFs was easily visualized by assigning each chemical shift to a specific color. The results illustrated that the pore size determined the exchange rate, and the geometric structure and elemental composition influenced the local charge experienced by xenon. We confirmed that a complex mixture was first differentiated by specific colors in ultrasensitive MRI. The introduction of MOFs helps to overcome long-standing obstacles in ultrasensitive, multiplexed MRI.

Metal organic frameworks with tunable pore structures are able to provide varied chemical environments for hyperpolarized ¹²⁹Xe atom hosting, which results in distinguishing magnetic resonance signals, and stains ultra-sensitive magnetic resonance imaging (MRI) with diverse colors.

Hard template synthesis of 2D porous Co3O4 nanosheets with graphene oxide for H2O2 sensing

In this work, we used graphene oxide (GO) as a template that was removed by calcination to finally successfully prepare Co₃O₄ with 2D porous nanostructure. The results show that 2D porous structure Co₃O₄ nanosheets were only prepared at pH = 2. After electrochemical tests, the as-prepared Co₃O₄ nanosheets showed electrochemical properties that are highly suitable for H₂O₂ detection, such as high current response, short response time (less than 3 s), wide linear range (0.388-44.156 mM), low limit of detection (2.33 μM) and high sensitivity (0.0891 mA mM^-1 cm^-2). These excellent properties are mainly due to GO, as a 2D template, which connects Co₃O₄ nanoparticles to each other on a 2D plane, preventing the agglomeration of Co₃O₄ nanoparticles. The abundant pores between Co₃O₄ nanoparticles can greatly increase the reaction between the nanoparticles and H₂O₂ molecules.

Repurposing Clinical Agents for Chemical Exchange Saturation Transfer Magnetic Resonance Imaging: Current Status and Future Perspectives

Molecular imaging is becoming an indispensable tool to pursue precision medicine. However, quickly translating newly developed magnetic resonance imaging (MRI) agents into clinical use remains a formidable challenge. Recently, Chemical Exchange Saturation Transfer (CEST) MRI is emerging as an attractive approach with the capability of directly using low concentration, exchangeable protons-containing agents for generating quantitative MRI contrast. The ability to utilize diamagnetic compounds has been extensively exploited to detect many clinical compounds, such as FDA approved drugs, X-ray/CT contrast agents, nutrients, supplements, and biopolymers. The ability to directly off-label use clinical compounds permits CEST MRI to be rapidly translated to clinical settings. In this review, the current status of CEST MRI based on clinically available compounds will be briefly introduced. The advancements and limitations of these studies are reviewed in the context of their pre-clinical or clinical applications. Finally, future directions will be briefly discussed.

N-Aryl Amides as Chemical Exchange Saturation Transfer Magnetic Resonance Imaging Contrast Agents

Chemical exchange saturation transfer (CEST) MRI has recently emerged as a versatile molecular imaging approach in which diamagnetic compounds can be utilized to generate an MRI signal. To expand the scope of CEST MRI applications, herein, we systematically investigated the CEST properties of N-aryl amides with different N-aromatic substitution, revealing their chemical shifts (4.6-5.8 ppm) and exchange rates (up to thousands s^-1 ) are favorable to be used as CEST agents as compared to alkyl amides. As the first proof-of-concept study, we used CEST MRI to detect the enzymatic metabolism of the drug acebutolol directly by its intrinsic CEST signal without any chemical labeling. Our study implies that N-aryl amides may enable the label-free CEST MRI detection of the metabolism of many N-aryl amide-containing drugs and a variety of enzymes that act on N-aryl amides, greatly expanding the scope of CEST MR molecular imaging.

High-resolution creatine mapping of mouse brain at 11.7 T using non-steady-state chemical exchange saturation transfer

The current study aims to optimize the acquisition scheme for the creatine chemical exchange saturation transfer weighted (CrCESTw) signal on mouse brain at 11.7 T, in which a strong magnetization transfer contrast (MTC) is present, and to further develop the polynomial and Lorentzian line-shape fitting (PLOF) method for quantifying CrCESTw signal with a non-steady-state (NSS) acquisition scheme. Studies on a Cr phantom with cross-linked bovine serum albumin (BSA) as well as on mouse brain demonstrated that the maximum CrCESTw signal was reached with a short saturation time determined by the rotating frame relaxation time of the MTC pool instead of the steady-state saturation. The saturation power for the maximal signal was around 1-1.5 μT for Cr with 20% cross-linked BSA and in vivo applications, but 2 μT was found to be most practical for signal stability. For the CrCEST acquisition with strong MTC interference, the optimal saturation power and length are completely different from those on Cr solution alone. This observation could be explained well using R_1ρ theory by incorporating the strong MTC pool. Finally, a high-resolution Cr map was obtained on mouse brain using the PLOF method with the NSS CEST acquisition and a cryogenic coil. The Cr map obtained by CEST showed homogenous intensity across the mouse brain except for regions with cerebrospinal fluid.

Detecting acid phosphatase enzymatic activity with phenol as a chemical exchange saturation transfer magnetic resonance imaging contrast agent (PhenolCEST MRI)

Phenol contains an exchangeable hydroxyl proton resonant at 4.8 ppm from the resonance frequency of water in the 1H nuclear magnetic resonance (1H NMR) spectrum, enabling itself to be detected at sub-mM concentration by either chemical exchange saturation transfer magnetic resonance imaging (CEST MRI) or exchange-based T2 relaxation enhancement (T2ex) effect under acidic and basic conditions, respectively. We recently investigated the T2ex effects of phenol and its derivatives, but the CEST characteristics of phenols are unknown in detail, and no study on using the natural CEST MRI effects of phenol for detecting enzymatic activity has been conducted. Herein, on the basis of the inherent CEST MR property of phenol, namely phenolCEST, we developed the first MRI approach to detect acid phosphatase (AcP) enzymatic activity. Upon the activity of AcP at pH = 5.0, non-CEST-detectable enzyme substrate phenyl phosphate was converted to CEST-detectable phenol, providing a simple way to quantify AcP activity directly without the need for a second signalling probe. We showed the application of this phenolCEST biosensor for measuring AcP activity in both enzyme solutions and cell lysates of prostate cells. This work opens a door for the utilization of phenolCEST MRI technique in sensor design and development.

CEST MRI monitoring of tumor response to vascular disrupting therapy using high molecular weight dextrans

PURPOSE

Vascular disrupting therapy of cancer has become a promising approach not only to regress tumor growth directly but also to boost the delivery of chemotherapeutics in the tumor. An imaging approach to monitor the changes in tumor vascular permeability, therefore, has important applications for monitoring of vascular disrupting therapies.

METHODS

Mice bearing CT26 subcutaneous colon tumors were injected intravenously with 150 kD dextran (Dex150, diameter, d~ 20 nm, 375 mg/kg), tumor necrosis factor-alpha (TNF-α; 1 µg per mouse), or both (n = 3 in each group). The Z-spectra were acquired before and 2 h after the injection, and the chemical exchange saturation transfer (CEST) signals in the tumors as quantified by asymmetric magnetization transfer ratio (MTR_asym ) at 1 ppm were compared.

RESULTS

The results showed a significantly stronger CEST contrast enhancement at 1 ppm (∆MTR_asym = 0.042 ± 0.002) in the TNF-α-treated tumors than those by Dex150 alone (∆MTR_asym = 0.000 ± 0.005, P = 0.0229) or TNF-α alone (∆MTR_asym = 0.002 ± 0.004, P = 0.0264), indicating that the TNF-α treatment strongly augmented the tumor uptake of 150 kD dextran. The MRI findings were verified by fluorescence imaging and immunofluorescence microscopy.

CONCLUSIONS

High molecular weight dextrans can be used as safe and sensitive CEST MRI contrast agents for monitoring tumor response to vascular disrupting therapy and, potentially, for developing dextran-based theranostic drug delivery systems.

Molecular Imaging of Deoxycytidine Kinase Activity Using Deoxycytidine-Enhanced CEST MRI

Deoxycytidine kinase (DCK) is a key enzyme for the activation of a broad spectrum of nucleoside-based chemotherapy drugs (e.g., gemcitabine); low DCK activity is one of the most important causes of cancer drug-resistance. Noninvasive imaging methods that can quantify DCK activity are invaluable for assessing tumor resistance and predicting treatment efficacy. Here we developed a "natural" MRI approach to detect DCK activity using its natural substrate deoxycytidine (dC) as the imaging probe, which can be detected directly by chemical exchange saturation transfer (CEST) MRI without any synthetic labeling. CEST MRI contrast of dC and its phosphorylated form, dCTP, successfully discriminated DCK activity in two mouse leukemia cell lines with different DCK expression. This dC-enhanced CEST MRI in xenograft leukemic cancer mouse models demonstrated that DCK(+) tumors have a distinctive dynamic CEST contrast enhancement and a significantly higher CEST contrast than DCK(-) tumors (AUC^{0-60 min} = 0.47 ± 0.25 and 0.20 ± 0.13, respectively; P = 0.026, paired Student t test, n = 4) at 1 hour after the injection of dC. dC-enhanced CEST contrast also correlated well with tumor responses to gemcitabine treatment. This study demonstrates a novel MR molecular imaging approach for predicting cancer resistance using natural, nonradioactive, nonmetallic, and clinically available agents. This method has great potential for pursuing personalized chemotherapy by stratifying patients with different DCK activity. SIGNIFICANCE: A new molecular MRI method that detects deoxycytidine kinase activity using its natural substrate deoxycytidine has great translational potential for clinical assessment of tumor resistance and prediction of treatment efficacy.

Sugar-based biopolymers as novel imaging agents for molecular magnetic resonance imaging

Sugar-based biopolymers have been recognized as attractive materials to develop macromolecule- and nanoparticle-based cancer imaging and therapy. However, traditional biopolymer-based imaging approaches rely on the use of synthetic or isotopic labeling, and because of it, clinical translation often is hindered. Recently, a novel magnetic resonance imaging (MRI) technology, chemical exchange saturation transfer (CEST), has emerged, which allows the exploitation of sugar-based biopolymers as MRI agents by their hydroxyl protons-rich nature. In the study, we reviewed recent studies on the topic of CEST MRI detection of sugar-based biopolymers. The CEST MRI property of each biopolymer was briefly introduced, followed by the pre-clinical and clinical applications. The findings of these preliminary studies imply the enormous potential of CEST detectable sugar-based biopolymers in developing highly sensitive and translatable molecular imaging agents and constructing image-guided biopolymer-based drug delivery systems. This article is categorized under: Diagnostic Tools > in vivo Nanodiagnostics and Imaging Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Creatine and phosphocreatine mapping of mouse skeletal muscle by a polynomial and Lorentzian line-shape fitting CEST method

PURPOSE

To obtain high-resolution Cr and PCr maps of mouse skeletal muscle using a polynomial and Lorentzian line-shape fitting (PLOF) CEST method.

METHODS

Wild-type mice and guanidinoacetate N-methyltransferase-deficient (GAMT-/-) mice that have low Cr and PCr concentrations in muscle were used to assign the Cr and PCr peaks in the Z-spectrum at 11.7 T. A PLOF method was proposed to simultaneously extract and quantify the Cr and PCr by assuming a polynomial function for the background and 2 Lorentzian functions for the CEST peaks at 1.95 ppm and 2.5 ppm.

RESULTS

The Z-spectra of phantoms revealed that PCr has 2 CEST peaks (2 ppm and 2.5 ppm), whereas Cr only showed 1 peak at 2 ppm. Comparison of the Z-spectra of wild-type and GAMT-/- mice indicated that, contrary to brain, there was no visible protein guanidinium peak in the skeletal-muscle Z-spectrum, which allowed us to extract clean PCr and Cr CEST signals. High-resolution PCr and Cr concentration maps of mouse skeletal muscle were obtained by the PLOF CEST method after calibration with in vivo MRS.

CONCLUSIONS

The PLOF method provides an efficient way to map Cr and PCr concentrations simultaneously in the skeletal muscle at high MRI field.

Investigation of the contribution of total creatine to the CEST Z-spectrum of brain using a knockout mouse model

The current study aims to assign and estimate the total creatine (tCr) signal contribution to the Z-spectrum in mouse brain at 11.7 T. Creatine (Cr), phosphocreatine (PCr) and protein phantoms were used to confirm the presence of a guanidinium resonance at this field strength. Wild-type (WT) and knockout mice with guanidinoacetate N-methyltransferase deficiency (GAMT-/-), which have low Cr and PCr concentrations in the brain, were used to assign the tCr contribution to the Z-spectrum. To estimate the total guanidinium concentrations, two pools for the Z-spectrum around 2 ppm were assumed: (i) a Lorentzian function representing the guanidinium chemical exchange saturation transfer (CEST) at 1.95 ppm in the 11.7-T Z-spectrum; and (ii) a background signal that can be fitted by a polynomial function. Comparison between the WT and GAMT-/- mice provided strong evidence for three types of contribution to the peak in the Z-spectrum at 1.95 ppm, namely proteins, Cr and PCr, the latter fitted as tCr. A ratio of 20 ± 7% (protein) and 80 ± 7% tCr was found in brain at 2 μT and 2 s saturation. Based on phantom experiments, the tCr peak was estimated to consist of about 83 ± 5% Cr and 17 ± 5% PCr. Maps for tCr of mouse brain were generated based on the peak at 1.95 ppm after concentration calibration with in vivo magnetic resonance spectroscopy.