Near-Infrared-to-Ultraviolet Light-Mediated Photoelectrochemical Aptasensing Platform for Cancer Biomarker Based on Core-Shell NaYF4:Yb,Tm@TiO2 Upconversion Microrods

Ultrasensitive monitoring of PCB77 in environmental samples using a visible-driven photoelectrochemical sensing platform coupling with exonuclease I assisted in target recycling

Due to the urgent need for detecting trace amounts of 3,3',4,4'-tetrachlorobiphenyl (PCB77) in the environment, we have developed an efficient and visible-driven photoelectrochemical (PEC) sensing platform based on carbon quantum dots (CQDs) modified titanium dioxide nanorods (TiO2 NRs), coupling with exonuclease I (Exo I) assisted in target recycling for significant signal amplification. CQDs/TiO2 NRs with high visible-light absorption ability and electron-hole separation efficiency is used as photoactive substrate for anchoring anti-PCB77 aptamer and its complementary DNA (cDNA). With the addition of PCB77, the specific interaction between PCB77 and its aptamer forces aptamer to separate from the electrode surface, resulting in an increase in photocurrent density. Adding Exo I in the test system, a self-catalytic target cycle was motivated, which significantly increased the PEC signal by more than twice, achieving signal amplification. The relationship between the photocurrent density changes and the concentrations of PCB77 are utilized to achieve quantitative detection of PCB77. The designed PEC sensing platform has good analytical performance with a detection limit as low as 0.33 pg L-1, high selectivity and stability. Moreover, the PEC sensor is successfully used to evaluate the content of PBC77 in the environment samples. The established sensing platform provides a simple and efficient method for detecting trace amounts of PCB77 in the environment.

Ultrasensitive Photoelectrochemical Biosensor for Dual-miRNAs Detection Based on Molecular Logic Gates and Methylene Blue Sensitized ZnO@CdS@Au Nanorods

The occurrence of cancer is often closely related to multiple tumor markers, so it is important to develop multitarget detection methods. By the proper design of the input signals and logical operations of DNA logic gates, detection and diagnosis of cancer at different stages can be achieved. For example, in the early stages, specific input signals can be designed to correspond to early specific tumor markers, thereby achieving early cancer detection. In the late stage, logic gates for multitarget detection can be designed to simultaneously detect multiple biomarkers to improve diagnostic accuracy and comprehensiveness. In this work, we constructed a dual-target-triggered DNA logic gate for anchoring DNA tetrahedra, where methylene blue was embedded in the DNA tetrahedra to sensitize ZnO@CdS@Au, achieving ultrasensitive detection of the target substance. We tested the response of AND and OR logic gates to the platform. For AND logic gates, the sensing platform only responds when both miRNAs are present. In the concentration range of 10 aM to 10 nM, the photoelectric signal gradually increases with an increase of the target concentration. Subsequently, we used OR logic gates for miRNA detection. Even if only one target exists, the sensing platform exhibits excellent performance. Similarly, within the concentration range of 10 aM to 10 nM, the photoelectric signal gradually increases with an increase of the target concentration. The minimum detection limit is 1.10 aM. Whether it is the need to detect multiple targets simultaneously or only one of them, we can achieve it by selecting the appropriate logic gate. This strategy holds promising application prospects in fields such as biosensing, medical diagnosis, and environmental monitoring.

Highly Electroactive Co2+-Based Metal-Organic Frameworks as an Efficient Coreaction Accelerator for Amplifying Near-Infrared Electrochemiluminescence of Gold Nanoclusters in Biomarkers Immunoassay

Metal nanoclusters (NCs) as a new kind of luminophore have acquired sufficient interest, but their widespread application is restricted on account of their relatively low electrochemiluminescence (ECL) efficiency. Then, aqueous metal NCs with high ECL efficiency were strongly anticipated, especially for the ultrasensitive analysis of biomarkers. Herein, a near-infrared (NIR) ECL biosensing strategy for the test of neuron-specific enolase (NSE) was proposed by utilizing N-acetyl-l-cysteine (NAC)- and cysteamine (Cys)-stabilized gold NCs (NAC/Cys-AuNCs) as ECL emitters with the NIR ECL emission around 860 nm and a metal-organic framework/palladium nanocubes (ZIF-67/PdNCs) hybrid as the coreaction accelerator through their admirable electrocatalytic activity. The NIR emission would reduce photochemical injury to the samples and even realize nondestructive analysis with highly strong susceptibility and suitability. Furthermore, the utilization of ZIF-67/PdNCs could improve the ECL response of NAC/Cys-AuNCs by facilitating the oxidation of the coreactant triethylamine (TEA), leading to the production of a larger quantity of reducing intermediate radical TEA•+. Consequently, NAC/Cys-AuNCs with ZIF-67/PdNCs displayed 2.7 fold enhanced ECL emission compared with the single NAC/Cys-AuNCs using TEA as the coreactant. In addition, HWRGWVC (HWR), a heptapeptide, was introduced to immobilize antibodies for the specially binding Fc fragment of the antibodies, which improved the binding efficiency and sensitivity. As a result, a "signal-on" immunosensor for NSE analysis was obtained with an extensive linear range of 0.1 to 5 ng/mL and a low limit of detection (0.033 fg/mL) (S/N = 3). This study provides a wonderful method for the development of an efficient nondestructive immunoassay.

An intelligent Cu/ZIF-8-based nanodrug delivery system for tumor-specific and synergistic therapy via tumor microenvironment-responsive cascade reaction

An intelligent nanodrug delivery system (Cu/ZIF-8@GOx-DOX@HA, hereafter CZGDH) consisting of Cu-doped zeolite imidazolate framework-8 (Cu/ZIF-8, hereafter CZ), glucose oxidase (GOx), doxorubicin (DOX), and hyaluronic acid (HA) was established for targeted drug delivery and synergistic therapy of tumors. The CZGDH specifically entered tumor cells through the targeting effect of HA and exhibited acidity-triggered biodegradation for subsequent release of GOx, DOX, and Cu2+ in the tumor microenvironment (TME). The GOx oxidized the glucose (Glu) in tumor cells to produce H2O2 and gluconic acid for starvation therapy (ST). The DOX entered the intratumoral cell nucleus for chemotherapy (CT). The released Cu2+ consumed the overexpressed glutathione (GSH) in tumor cells to produce Cu+. The generated Cu+ and H2O2 triggered the Fenton-like reaction to generate toxic hydroxyl radicals (·OH), which disrupted the redox balance of tumor cells and effectively killed tumor cells for chemodynamic therapy (CDT). Therefore, synergistic multimodal tumor treatment via TME-activated cascade reaction was achieved. The nanodrug delivery system has a high drug loading rate (48.3 wt%), and the three-mode synergistic therapy has a strong killing effect on tumor cells (67.45%).

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

Stimuli-responsive peptide assemblies: Design, self-assembly, modulation, and biomedical applications

Peptide molecules have design flexibility, self-assembly ability, high biocompatibility, good biodegradability, and easy functionalization, which promote their applications as versatile biomaterials for tissue engineering and biomedicine. In addition, the functionalization of self-assembled peptide nanomaterials with other additive components enhances their stimuli-responsive functions, promoting function-specific applications that induced by both internal and external stimulations. In this review, we demonstrate recent advance in the peptide molecular design, self-assembly, functional tailoring, and biomedical applications of peptide-based nanomaterials. The strategies on the design and synthesis of single, dual, and multiple stimuli-responsive peptide-based nanomaterials with various dimensions are analyzed, and the functional regulation of peptide nanomaterials with active components such as metal/metal oxide, DNA/RNA, polysaccharides, photosensitizers, 2D materials, and others are discussed. In addition, the designed peptide-based nanomaterials with temperature-, pH-, ion-, light-, enzyme-, and ROS-responsive abilities for drug delivery, bioimaging, cancer therapy, gene therapy, antibacterial, as well as wound healing and dressing applications are presented and discussed. This comprehensive review provides detailed methodologies and advanced techniques on the synthesis of peptide nanomaterials from molecular biology, materials science, and nanotechnology, which will guide and inspire the molecular level design of peptides with specific and multiple functions for function-specific applications.

One-Step Electrochemical Sensing of CA-125 Using Onion Oil-Based Novel Organohydrogels as the Matrices

To reduce the high mortality rates caused by ovarian cancer, creating high-sensitivity, quick, basic, and inexpensive methods for following cancer antigen 125 (CA-125) levels in blood tests is of extraordinary significance. CA-125 is known as the exclusive glycoprotein employed in clinical examinations to monitor and diagnose ovarian cancer and detect its relapses as a tumor marker. Elevated concentrations of this antigen are linked to the occurrence of ovarian cancer. Herein, we designed organohydrogels (ONOHs) for identifying the level of CA-125 antigen at fast and high sensitivity with electrochemical strategies in a serum medium. The ONOH structures are synthesized with glycerol, agar, and glutaraldehyde and at distinct ratios of onion oil, and then, the ONOHs are characterized with Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM). Electrochemical measurements are performed by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS) in the absence and presence of CA-125 on the designed ONOHs. For the prepared ONOH-3 electrode, two distinct linear ranges are determined as 0.41-8.3 and 8.3-249.0 U/mL. The limit of quantitation and limit of detection values are calculated as 2.415 and 0.805 μU/mL, respectively, (S/N = 3). These results prove that the developed electrode material has high sensitivity, stability, and selectivity for the detection of the CA-125 antigen. In addition, this study can be reasonable for the practical detection of CA125 in serum, permitting early cancer diagnostics and convenient treatment.

A double defects-dominated flexible TiO2 matrix for in-situ SERS sensing of antibiotic residues in aquatic ecosystem (fish & fishpond water) and their on-site degradation in flowing water

High-performance flexible semiconductor material can be used as an excellent multifunctional matrix for in-situ ultrasensitive surface-enhanced Raman scattering (SERS) detection and synchronous photocatalytic degradation of antibiotic residues in aquatic ecosystem. Here, a calcium-doped TiO2 flexible matrix with double defects (surface oxygen vacancy defect and Ti3+ energy level defect) was developed by its "in-situ one-step" hydrothermal synthesis on cotton fabric for the above purposes. Due to the joint contribution of double defects, a multi-channel charge transfer mode and a high-efficiency carrier separation are achieved, which endows flexible cotton fabric/Ca-doped TiO2 (Cot/Ca-TiO2) substrate with the greatly boosted SERS effect for in-situ detection of antibiotic residues on fish body surface and in fishpond water by a simple wiping or dipping sampling method, even for simultaneous identification of multi-component residues. The detection limits of three antibiotic residues (enrofloxacin, ciprofloxacin and enoxacin) are as low as 10-9 M, which are far lower than the EU standard. More meaningfully, the flexible Cot/Ca-TiO2 can be used as a multifunctional filter-membrane type photocatalyst for efficient on-site degradation of antibiotic residues in flowing fishpond water by a multi-grade photocatalysis means. Moreover, the flexible matrix exhibits good recyclability in both actual detection and photocatalysis.

A miniprotein receptor electrochemical biosensor chip based on quantum dots

Recently protein binders have emerged as a promising substitute for antibodies due to their high specificity and low cost. Herein, we demonstrate an electrochemical biosensor chip through the electronic labelling strategy using lead sulfide (PbS) colloidal quantum dots (CQDs) and the unnatural SARS-CoV-2 spike miniprotein receptor LCB. The unnatural receptor can be utilized as a molecular probe for the construction of CQD-based electrochemical biosensor chips, through which the specific binding of LCB and the spike protein is transduced to sensor electrical signals. The biosensor exhibits a good linear response in the concentration range of 10 pg mL-1 to 1 μg mL-1 (13.94 fM to 1.394 nM) with the limit of detection (LOD) being 3.31 pg mL-1 (4.607 fM for the three-electrode system) and 9.58 fg mL-1 (0.013 fM for the HEMT device). Due to the high sensitivity of the electrochemical biosensor, it was also used to study the binding kinetics between the unnatural receptor LCB and spike protein, which has achieved comparable results as those obtained with commercial equipment. To the best of our knowledge, this is the first example of using a computationally designed miniprotein receptor based on electrochemical methods, and it is the first kinetic assay performed with an electrochemical assay alone. The miniprotein receptor electrochemical biosensor based on QDs is desirable for fabricating high-throughput, large-area, wafer-scale biochips.

DNA conformational change embrace ultraviolet photolysis: A dual-mode sensing platform for electrochemical and fluorescent signaling

We developed a dual-mode biosensor that utilizes DNA conformational changes and ultraviolet photolysis for electrochemical (EC) and fluorescence (FL) detection. In this study, a stem-loop-structured carcinoembryonic antigen (CEA) aptamer was modified on an Au electrode, and this aptamer contained a redox-labeled methylene blue (MB), short-chain DNA with a 6-carboxylic fluorescein (FAM) and a PC linker that can be cleaved by ultraviolet light. Subsequently, CEA and CEA antibody-modified upconversion nanoparticle bioconjugates (CEA-Ab@UCNPs) were added. In the presence of CEA, Ab@UCNPs can bind CEA and push the MB which was originally close to the electrode surface, away from the electrode surface, resulting in a reduced redox current. Under irradiation with a 980 nm laser, the UCNPs emit ultraviolet light, leading to photocleavage of the PC linker and the release of FAM for FL sensing. Under optimal conditions, the EC and FL modes showed good responses to CEA within 0.01-50 ng/mL and 0.1-80 ng/mL, respectively.

NIR-driven photoelectrochemical-fluorescent dual-mode biosensor based on bipedal DNA walker for ultrasensitive detection of microRNA

Optical biosensors have become powerful tools for bioanalysis, but most of them are limited by optic damage, autofluorescence, as well as poor penetration ability of ultraviolet (UV) and visible (Vis) light. Herein, a near-infrared light (NIR)-driven photoelectrochemical (PEC)-fluorescence (FL) dual-mode biosensor has been proposed for ultrasensitive detection of microRNA (miRNA) based on bipedal DNA walker with cascade amplification. Fueled by toehold-mediated strand displacement (TMSD), the bipedal DNA walker triggered by target miRNA-21 is formed through catalytic hairpin assembly (CHA), which can efficiently move along DNA tracks on CdS nanoparticles (CdS NPs)-modified fluorine doped tin oxide (FTO) electrode, resulting in the introduction of upconversion nanoparticles (UCNPs) on electrode surface. Under 980 nm laser irradiation, the UCNPs serve as the energy donor to emit UV/Vis light and excite CdS NPs to generate photocurrent for PEC detection, while the upconversion luminescence (UCL) at 803 nm is monitored for FL detection. This PEC-FL dual-mode biosensor has achieved the ultrasensitive and accurate analysis of miRNA-21 in human serum and different gynecological cancer cells. Overall, the proposed dual-mode biosensor can not only couple the inherent features of each single-mode biosensor but also provide mutual authentication of testing results, which opens up a new avenue for early diagnosis of miRNA-related diseases in clinic.

Oxygen Vacancies-Induced Antifouling Photoelectrochemical Aptasensor for Highly Sensitive and Selective Determination of α-Fetoprotein

Accurate measurement of cancer markers in urine is a convenient method for tumor monitoring. However, the concentration of cancer markers in urine is so low that it is difficult to achieve their measurement. Photoelectrochemical (PEC) sensors are a promising technology to realize the detection of trace cancer markers due to their high sensitivity. Currently, the interference of nonspecific biomolecules in urine is the main reason affecting the high sensitivity and selectivity of PEC sensors in detecting cancer markers. In this work, a strategy of oxygen vacancy (OV) modulation is proposed to construct a fouling-resistant PEC aptamer sensing platform for the detection of α-fetoprotein (AFP), a liver cancer marker. The introduction of OVs induces the formation of intermediate localized states in the photoelectric material, which not only facilitates the separation of photogenerated carriers but also leads to the redshift of the light absorption edge. More importantly, OVs with positive electrical properties can be employed to modify the antifouling layer (C-PEG) with negatively charged groups through an electrostatic interaction. The synergistic effect of OVs, antifouling layer, and aptamer resulted in a TiO2/OVs/C-PEG-based PEC sensor achieves a wide linear range from 1 pg/mL to 100 ng/mL and a low detection limit of 0.3 pg/mL for AFP. In addition, the sensor successfully realized the determination of AFP in urine samples and accurately differentiated between normal people and liver cancer patients in the early and advanced stages. This project is of great significance in advancing the application of photoelectrochemical bioanalytical technology to achieve the detection of cancer markers in urine by investigating the construction of an OVs-regulated fouling-resistant sensing interface.

Genosensor on-chip paper for point of care detection: A review of biomedical analysis and food safety application

Over the last decade, paper-based biosensing has attracted considerable attention in numerous fields due to several advantages of them. To elaborate, using paper as a substrate of sensing approaches can be considered an affordable sensing approach owing to low cost of paper, and alongside that, the ability to operate without requiring external equipment. In many cases, cost-effective fabrication techniques such as screen printed and drop casting can be supposed as other benefits of these platforms. Despite the portability and affordability of paper-based assay, two important limitations including sensitivity and selectivity can decrease the application of these sensing approaches. Initially, decoration of paper substrate with nanomaterials (NMs) can improve the properties of paper due to high surface area and conductivity of them. Secondly, the presence of bioreceptors can provide a selective detection platform. Among different bioreceptors, deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) can play a significant role. From this perspective, paper-based biosensors can be used for the detection of various gens which related to biomedical or food safety. In this review, we attempted to summarize recent trends and applications of paper-based genosensor, along with critical arguments in terms of NMs role in signal amplification. Furthermore, the lack of paper-based genosensors in field the of biomedical and food safety will be discussed in the following.

Octahedral Cu2O nanomaterials as electrochemical aptasensor for sensitive detection of tetracycline in milk

In this work, A novel label-free electrochemical biosensor based on octahedral Cu2O @ Au nanocomposites was developed for the detection of tetracycline. The gold nanoparticles (AuNPs) on the surface of Cu2O nanomaterials not only improve the electrochemical performance, but also can be used as a binding site for thiol-modified tetracycline aptamers, which can specifically bind to tetracycline. Cu2O @ Au nanocomposites provide a synergistic effect of electrochemical signal amplification and tetracycline recognition strategy. Under the optimal conditions, the proposed biosensor exhibited different electrochemical reactions for different concentrations of tetracycline, with a linear range of 1 nM-1000 μM and a detection limit of 0.16 nM. This work provides a new idea for rapid and sensitive detection of tetracycline by using a simple and economical tetracycline aptamer combined with Cu2O @ Au biosensor platform.

Fabrication of near infrared light responsive photoelectrochemical immunosensor for in vivo detection of melanoma cells

Effective and convenient detection of melanoma cells with high sensitivity is essential to identify malignant melanoma in its early stage. However, the existing detection methods, such as immunohistochemical analysis, are too complicated and time-consuming to realize the convenient in vivo and in situ detection. Herein, a near infrared responsive photoelectrochemical (PEC) immunosensor is proposed with plasmonic Au nanoparticles-photonic TiO2 nanocaves (Au/TiO2 NCs) as photon harvest and conversion transducer and antibody as cell recognition unit. The micro-antibody/Au/TiO2 NCs photoelectrode can easily in vivo distinguish melanoma cells and can realize sensitive detection of melanoma cells in short time of 1 min with a lowest limit of detection of 2 cell mL-1. The PEC immunosensor strategy not only allows us to pioneeringly implement sensitive in vivo bio-detection, but also opens up a new avenue for rational design of cell recognition units and micro-electrode for universal and reliable bio-detections.

A universal CRISPR-Cas14a responsive triple-sensitized upconversion photoelectrochemical sensor

It has recently been discovered that, like other members of the Cas family (12a and 13a), the clustered regularly interspaced short palindrome repeat CRISPR-Cas14a system not only mediates high-sensitivity detection with exceptionally strong gene editing ability but is also generally useful for DNA detection via fluorescence. Photoelectrochemical (PEC) sensors have been widely applied as efficient analytical tools. Measuring electrical signals is more cost-effective and the necessary equipment is more easily portable than fluorescence signal detectors, but their stability still needs to be improved. The high base resolution of CRISPR-Cas14a can compensate for such shortcomings. Therefore, electrical signals and fluorescence signals were combined, and the development of a universal CRISPR-Cas14a-responsive ultrasensitive upconversion PEC sensor is described in this paper. Moreover, strand displacement amplification (SDA) and a near-infrared (NIR) light source were utilized to further improve the stability and sensitivity of the photoelectric signals. At the same time, the modified working electrode (UCNPs-ssDNA-CdS@Au/ITO) on the three-electrode disposable sensor was used as the reporter probe, which cooperates with the trans-cleavage activity of Cas14a endonuclease. To verify the universality of this sensor, the UCNPs-Cas14a-based PEC sensor was applied for the detection of the small-molecule toxin T2 and protein kinase PTK7. Here, we report that the limit of detection of this reagent was within the fg range, successfully applied to the detection of T2 in oats and PTK7 in human serum. We propose that by combining PEC and CRISPR-14a, UCNPs-Cas14a-based PEC sensors could become powerful drivers for the extensive development of ultrasensitive, accurate and cost-effective universal sensors for detection and diagnosis.

A highly selective self-powered sensor based on the upconversion nanoparticles/CdS nanospheres for chlorpyrifos detection

Light sources are crucial for photoelectrochemical (PEC) self-powered sensing, where visible light is widely used. However, due to its high energy, it has some downsides as an irradiation source for overall system, so it is urgent to achieve effective near-infrared (NIR) light absorption because it makes up a significant portion of the solar spectrum. Herein, up-conversion nanoparticles (UCNPs) that could increase the energy of low-energy radiation were combined with semiconductor CdS as the photoactive material (UCNPs/CdS), which broadens the response range of solar spectrum. The NIR light-excited self-powered sensor could be produced via oxidizing H2O at photoanode and lowering dissolved oxygen at cathode under the NIR light without external voltage. Meanwhile, molecularly imprinted polymer (MIP) was added to photoanode as a recognition element to increase the sensor's selectivity. The open-circuit voltage of the self-powered sensor grew linearly as chlorpyrifos concentration climbed from 0.01 to 100 ng mL-1, showing good selectivity as well as reproducibility. This work provides valuable basis for the preparation of efficient and practical PEC sensor with NIR light response.

HCR/DNAzyme-triggered cascaded feedback cycle amplification for self-powered dual-photoelectrode detection of femtomolar HPV16

For high-performance dual-photoelectrode assay, developing a pair of photoactive materials with well-matched band structure and the design of a powerful sensing strategy are highly desirable. Herein, the Zn-TBAPy pyrene-based MOF and BiVO4/Ti3C2 Schottky junction were employed as photocathode and photoanode to form an efficient dual-photoelectrode system. The integration of the cascaded hybridization chain reaction (HCR)/DNAzyme-assisted feedback amplification with DNA walker-mediated cycle amplification strategy realizes femtomolar HPV16 dual-photoelectrode bioassay. Through the activation of the HCR cascaded with the DNAzyme system in the presence of HPV16, plentiful HPV16 analogs are generated that leads to exponential positive feedback signal amplification. Meanwhile on the Zn-TBAPy photocathode, the NDNA hybridizes with the bipedal DNA walker followed by circular cleavage by Nb.BbvCI NEase, producing a dramatically enhanced PEC readout. The achieved ultralow detection limit of 0.57 fM and a wide linear range of 10-6 nM-103 nM showcase the excellent performance of the developed dual-photoelectrode system.

Hierarchically Structured and Highly Dispersible MOF Nanozymes Combining Self-Assembly and Biomineralization for Sensitive and Persistent Chemiluminescence Immunoassay

Metal-organic frameworks (MOF) are promising candidates for the construction of artificial nanozymes and have found applications in many fields. However, the preparation of nanosized MOF materials with high performance and good dispersibility is still a big challenge and is in great demand as signal labels for immunoassays. In this work, hierarchically structured and highly dispersible MOF nanoparticles were facilely prepared in a one-pot method. Self-assembled micelles from PEGylated hematin were used as structured templates to mediate the formation of zeolitic imidazole framework-8 (ZIF-8) nanoparticles in aqueous solution. The encapsulation of micelles in ZIF-8 frameworks produces well-dispersed nanoparticles and generates dual-confinement effects for catalytic hematin. Owing to the hierarchical structures, the formed MOF nanozymes show enhanced peroxidase-like activity and enable persistent chemiluminescence behaviors for the luminol system. Sandwich-type chemiluminescence immunoassays for carcinoembryonic antigen (CEA) were proposed using MOF nanozymes as signal labels, and good analytical performances were achieved. The combination of self-assembly and biomineralization may open new avenues for the development of MOF nanomaterials.

High-efficiency upconversion process in cobalt and neodymium doped graphene QDs for biomedical applications

Multiphoton absorbing upconversion nanoparticles are emerging as bioimaging materials but are limited by the low quantum yield of their visible fluorescence. This article contains colloids of graphene quantum dots (GQDs), Neodymium, and Cobalt doped Graphene Quantum dots (Co-GQDs and Nd-GQDs) surrounded by carboxylic acids are synthesized which especially are suitable for bio applications; in this way, carboxylic acid groups exchanged by Amoxicillin as an antibiotic with bactericidal activity. The XRD diffraction method, TEM microscope, UV-Vis, and photoluminescence spectroscopies characterize the synthesized materials. The synthesized Quantum dots (QDs) exhibit upconversion properties and their emission is centered at 480 nm, but a red shift was observed with the increase of the excitation wavelength. In the emission spectra of synthesized QDs that can be related to the defect levels introduced by passivation of the QDs in the structure, the results show that with the interaction of the surface QDs with more carboxylic groups, the redshift is not observed. As the results indicate an increase in the intensity of upconversion emission is recorded for Co-GQDs and Nd-GQDs. The absolute quantum efficiency (QY) for Co-GQDs and Nd-GQDs were determined to be 41% and 100% more than GQDs respectively. DFT calculations indicate a strong bond between graphene and cobalt and Neodymium atoms. In doped materials, there are trap levels between the band gap of the GQDs which are responsible for increasing the intensity of the upconversion phenomenon.

Carbon Dot-Modified Branched TiO2 Photoelectrochemical Glucose Sensors with Visible Light Response

The development of a photoelectrochemical (PEC) sensor for the sensitive and rapid detection of glucose is highly desirable. In PEC enzyme sensors, inhibition of the charge recombination of electrode materials is an efficient technique, and detection in visible light can prevent enzyme inactivation due to ultraviolet irradiation. In this study, a visible light-driven PEC enzyme biosensor was proposed, using CDs/branched TiO₂ (B-TiO₂) as the photoactive material and glucose oxidase (GOx) as the identification element. The CDs/B-TiO₂ composites were produced via a facile hydrothermal method. Carbon dots (CDs) can not only act as photosensitizers but also inhibit photogenerated electron and hole recombination of B-TiO₂. Under visible light, electrons in the carbon dots flowed to B-TiO₂ and further to the counter electrode through the external circuit. In the presence of glucose and dissolved oxygen, H₂O₂ generated through the catalysis of GOx could consume electrons in B-TiO₂, causing a decrease in photocurrent intensity. Ascorbic acid was added to ensure the stability of the CDs during the test. Based on the variation of the photocurrent response, the CDs/B-TiO₂/GOx biosensor presented a good sensing performance of glucose in visible light, its detection range was from 0 to 9.00 mM, and the detection limit was 0.0430 mM.

Ultrathin MXene nanosheet-based TiO2/CdS heterostructure as a photoelectrochemical sensor for detection of CEA in human serum samples

To develop highly accurate and ultrasensitive strategies is of great importance for the clinical measurement, in particular, the detection of cancer biomarkers. Herein, we synthesized an ultrasensitive TiO₂/MXene/CdS QDs (TiO₂/MX/CdS) heterostructure as a photoelectrochemical immunosensor, which favors energy levels matching and fast electron transfer from CdS to TiO₂ in the help of ultrathin MXene nanosheet. Dramatic photocurrent quenching can be observed upon incubation of the TiO₂/MX/CdS electrode by Cu²⁺ solution from 96-well microplate, which caused by the formation of CuS and subsequent Cu_xS (x = 1, 2), reducing the absorption of light and boosting the electron-hole recombination upon irradiation. As a result, the as-prepared biosensor demonstrates a linearly increased photocurrent quenching percentage (Q%) value with CEA concentration ranging from 1 fg/mL to 10 ng/mL, as well as a low detection limit of 0.24 fg/mL. Benefit from its excellent stability, high selectivity and good reproducibility of as-prepared PEC immunosensor, we believe that this proposed strategy might provide new opportunities for clinical diagnosis of CEA and other tumor markers.

In situ growth of TiO2/Ti3C2 MXene Schottky heterojunction as a highly sensitive photoelectrochemical biosensor for DNA detection

In this work, a heterojunction composed of a TiO₂ nanosheet and layered Ti₃C₂ was synthesized by directly growing TiO₂ in Ti₃C₂ MXene. Compared with pure TiO₂, TiO₂/Ti₃C₂ composites had increased surface area, and a light absorption range that extended from ultraviolet to visible light, which greatly extended the life of photogenerated carriers. A photoelectrochemical biosensor for DNA detection was constructed based on the TiO₂/Ti₃C₂ heterogeneous structure, which was comprehensively studied based on photocurrent responses. In the absence of the target, the CdSe QDs were close to the surface of the electrode, resulting in enhanced sensitization and increased photocurrent. In the presence of the target, the photocurrent decreases due to the formation of rigid double strands with the probe DNA, which caused the CdSe QDs to be far away from the electrode surface. The sensor had stability and sensitivity for DNA detection in the range of 10 nM-10 fM, and the lower detection limit was 6 fM. Its outstanding characteristics also provided ideas for detecting various other target DNA for early diagnosis of various diseases.

Endogenous Protease-Activatable Nanosensor Based on PNA-Peptide-DNA Engineering for AND-Gated and Dual-Model Detection of MicroRNA in Single Living Tumor Cells

The in situ detection of low-content cancer biomarkers by an endogenous activator instead of an exogenous initiator in vitro remains a great challenge, leaving a gap in the development of a tumor-specific nanosensor with an endogenous protease-activatable manner. Herein, we proposed an endogenous protease-activatable nanosensor (PA-NS) guided by peptide nucleic acid-peptide-DNA copolymers to realize AND-gated and dual-model sensing of miRNA-21 (miR-21) by combining electrochemical detection with optical imaging in living tumor cells, without an additional introduction of an exogenous activator or nanomaterials. Moreover, the PA-NS can only be activated by "dual keys" (overexpressed miR-21 and cathepsin B protease in tumor cells) simultaneously, which enables effective improvement of the tumor-to-healthy cells ratio. The fluorescence intensity measured in single tumor cells was ∼3.5-fold higher than that in single healthy cells, and the electrochemical response decreased ∼30% in the presence of target miRNA. Furthermore, studies on regulation of the protease activity and miR-21 fluctuation under external stimulation have contributed to our understanding of the biological processes and drug screenings underlying disease development. This specific endogenous protease-mediated manner for dual-model detection of miRNA guarantees excellent tumor-selective capability, which offers new opportunities to study cell heterogeneity and provides more reliable fundamentals for the diagnosis and treatment of cancer down to the single-cell level.

One-step impedimetric NT-proBNP aptasensor targeting cardiac insufficiency in artificial saliva

Currently, sensitive and accurate approaches for diagnosis, rapid assessment, and cardiac biomarker monitoring in patients with heart failure are needed. In this context, the advantages of aptamers over traditional antibodies have been employed to fabricate a single-step impedimetric N-terminal pro b-type natriuretic peptide (NT-proBNP)-modified gold microelectrode array. The development of an electrochemical aptasensing platform was based on the coimmobilization of alkanethiol self-assembled monolayers and amine-terminated aptamer that specifically recognized cardiac NT-proBNP protein resulting in charge electron transfer. Electroimpedimetric signals of the sensor were observed to be linear to the NT-proBNP concentrations in the range of 5.0 × 10^-3 to 1.0 pg mL^-1 (R² = 0.9624), while achieving a low detection limit of 5.0 × 10^-3 pg mL^-1. Clinically relevant detection levels for NT-proBNP were achieved in a simple, rapid, and label-free measurement using artificial saliva, which was highlighted to be specific, regenerative, and selective over potential interferers occurring during the processes of cardiac insufficiency, Therefore, the novel NT-proBNP aptasensor is a promising point-of-care tool exhibiting safe, non-invasive, affordable, and non-prescription home use accessible to overcome the limitations associated with conventional ELISA and previous aptasensing.

Opal photonic crystal-enhanced upconversion turn-off fluorescent immunoassay for salivary CEA with oral cancer

The point-of-care test of tumor markers in saliva with high specificity and sensitivity for early diagnosis of oral cancer is of great interest and significance, but remaining a daunting challenge due to the low concentration of such biomarkers in oral fluid. Herein, a turn-off biosensor based on opal photonic crystal (OPC) enhanced upconversion fluorescence is proposed to detect the carcinoembryonic antigen (CEA) in saliva by applying fluorescence resonance energy transfer sensing strategy. Hydrophilic PEI ligands are modified on upconversion nanoparticles to enhance the sensitivity of biosensor by promoting sufficient contact between saliva and detection region. As a substrate for the biosensor, OPC can also provide a local-field effect for greatly enhanced upconversion fluorescence by coupling the stop band and excitation light, and a 66-fold amplification of the upconversion fluorescence signal was obtained. For the CEA detection in spiked saliva, such sensors showed a favorable linear relationship at 0.1-2.5 ng mL^-1 and more than 2.5 ng mL^-1, respectively. The limit of detection was down to 0.1 ng mL^-1. Moreover, by monitoring real saliva, the effective discrepancy between patients and healthy people was confirmed, indicating remarkable practical application value in clinical early diagnosis and home-based self-monitoring of tumors.

Photothermal enhanced fluorescence quenching of Tb-norfloxacin for ultrasensitive human epididymal 4 detection

A fluorescence quenching enhanced immunoassay has been developed to achieve ultrasensitive recognition of human epididymal 4 (HE4) modifying the fluorescence quencher. The carboxymethyl cellulose sodium-functionalized Nb₂C MXene nanocomposite (CMC@MXene) was firstly introduced to quench the fluorescence signal of the luminophore Tb-Norfloxacin coordination polymer nanoparticles (Tb-NFX CPNPs). The Nb₂C MXene nanocomposite as fluorescent nanoquencher inhibits the electron transfer between Tb and NFX to quench the fluorescent signal by coordinating the strongly electronegative carboxyl group on CMC with Tb (III) of Tb-NFX complex. Simultaneously, due to the superior photothermal conversion capability of CMC@MXene, the fluorescence signal has been further weakened by the photothermal effect driven non-radiative decay of the excited state under near-infrared laser irradiation. The constructed fluorescent biosensor based on CMC@MXene probe finally realized the enhanced fluorescence quenching effect, and achieved ultra-high sensitivity and selective detection of HE4, exhibiting a wide linear relationship with HE4 concentration on the logarithmic axis in the range of 10^-5 to 10 ng/mL and a low detection limit of 3.3 fg/mL (S/N = 3). This work not only provides an enhanced fluorescent signal quenching method for the detection of HE4, but also provides novel insights for the design of fluorescent sensor toward different biomolecules.

Near-infrared to visible and ultraviolet upconversion in TiO2 thin films modified with Er and Yb

Upconversion as a modification strategy to enhance the utilization of sunlight in titanium dioxide photoanodes with an internal upconverter was investigated. TiO₂ thin films containing an Er activator and Yb sensitizer were deposited in the magnetron sputtering process on conducting glass, amorphous silica, and silicon. Scanning electron microscopy, energy dispersive spectroscopy, grazing incidence X-ray diffraction, and X-ray absorption spectroscopy allowed assessment of the thin film composition, structure, and microstructure. Optical and photoluminescence properties were measured by means of spectrophotometry and spectrofluorometry. Changing the content of Er³⁺ (1, 2, 10 at%) and Yb³⁺ (1, 10 at%) ions allowed us to achieve thin film upconverters with a crystallized and amorphous host. Upon 980 nm laser excitation Er³⁺ exhibits upconversion with the main emission in green (²H_11/2 → ⁴I_15/2, λ _em ≈ 525 nm) and weak emission in red (⁴F_9/2 → ⁴I_15/2, λ _em ≈ 660 nm). For a thin film with a higher ytterbium content (10 at%) a significant increase in red emission and upconversion from NIR to UV was observed. The average decay times of green emission for TiO₂:Er and TiO₂:Er,Yb thin films were calculated based on time-resolved emission measurements.

Insight into a Target-Induced Photocurrent-Polarity-Switching Photoelectrochemical Immunoassay for Ultrasensitive Detection of Escherichia coli O157:H7

Sensitive, portable methods of detection for foodborne pathogens hold great significance for the early warning and prevention of foodborne diseases and environmental pollution. Restricted by a complicated matrix and limited signaling strategies, developing a ready-to-use sensing platform with ultrahigh sensitivity remains challenging. In this work, near-infrared (NIR) light-responsive AgBiS₂ nanoflowers (NFs) and Cu₂O nanocubes (NCs) were introduced to construct a novel target-induced photocurrent-polarity-switchable system and verified for the development of an all-in-one, ready-to-use photoelectrochemical (PEC) immunosensor. NIR-responsive n-type AgBiS₂ NFs and p-type Cu₂O NCs producing anodic and cathodic photocurrents were conjugated with monoclonal (MAb₁) and polyclonal antibodies (PAb₂), respectively. Using a sandwich-type immunocomplex bridged by Escherichia coli O157:H7, an efficient photocurrent-polarity-switching PEC system was formed on a paper-based working electrode (PWE). Owing to the spatial separation of the photogenerated carriers and the elimination of false-positive/negative signals by the polarity-switchable photocurrent, the proposed NIR PEC immunoassay for E. coli O157:H7 exhibits a considerably low detection limit of 8 colony-forming units/milliliter (CFU/mL) with a linear range from 25 to 5 × 10⁷ CFU/mL. The platform includes a PWE with an automatic cleaning function and a portable PEC analyzer with smartphone-compatible Bluetooth capability, thus achieving point-of-care testing of E. coli O157:H7. The sensor was applied to the analysis of pork samples artificially contaminated with E. coli O157:H7, and the detection results were in good agreement with the plate counting method, a gold standard in the field. This work aimed to investigate the photoelectric activity of the NIR-responsive p/n-type composites and to provide a new signal-reversal route for the construction of an all-in-one ready-to-use PEC immunosensor for the detection of low-concentration biomolecules.

Recent advances in tumor biomarker detection by lanthanide upconversion nanoparticles

Early tumor diagnosis could reliably predict the behavior of tumors and significantly reduce their mortality. Due to the response to early cancerous changes at the molecular or cellular level, tumor biomarkers, including small molecules, proteins, nucleic acids, exosomes, and circulating tumor cells, have been employed as powerful tools for early cancer diagnosis. Therefore, exploring new approaches to detect tumor biomarkers has attracted a great deal of research interest. Lanthanide upconversion nanoparticles (UCNPs) provide numerous opportunities for bioanalytical applications. When excited by low-energy near-infrared light, UCNPs exhibit several unique properties, such as large anti-Stoke shifts, sharp emission lines, long luminescence lifetimes, resistance to photobleaching, and the absence of autofluorescence. Based on these excellent properties, UCNPs have demonstrated great sensitivity and selectivity in detecting tumor biomarkers. In this review, an overview of recent advances in tumor biomarker detection using UCNPs has been presented. The key aspects of this review include detection mechanisms, applications in vitro and in vivo, challenges, and perspectives of UCNP-based tumor biomarker detection.

2D carbon materials based photoelectrochemical biosensors for detection of cancer antigens

Cancer is a leading cause of death globally and early diagnosis is of paramount importance for identifying appropriate treatment pathways to improve cancer patient survival. However, conventional methods for cancer detection such as biopsy, CT scan, magnetic resonance imaging, endoscopy, X-ray and ultrasound are limited and not efficient for early cancer detection. Advancements in molecular technology have enabled the identification of various cancer biomarkers for diagnosis and prognosis of the deadly disease. The detection of these biomarkers can be done by biosensors. Biosensors are less time consuming compared to conventional methods and has the potential to detect cancer at an earlier stage. Compared to conventional biosensors, photoelectrochemical (PEC) biosensors have improved selectivity and sensitivity and is a suitable tool for detecting cancer agents. Recently, 2D carbon materials have gained interest as a PEC sensing platform due to their high surface area and ease of surface modifications for improved electrical transfer and attachment of biorecognition elements. This review will focus on the development of 2D carbon nanomaterials as electrode platform in PEC biosensors for the detection of cancer biomarkers. The working principles, biorecognition strategies and key parameters that influence the performance of the biosensors will be critically discussed. In addition, the potential application of PEC biosensor in clinical settings will also be explored, providing insights into the future perspective and challenges of exploiting PEC biosensors for cancer diagnosis.

Ultrasensitive detection of multiple cancer biomarkers by a triple cascade amplification strategy in combination with single particle inductively coupled plasma mass spectrometry

A versatile triple cascade amplification strategy was developed for ultrasensitive simultaneous detection of multiple cancer biomarkers using single particle inductively coupled plasma mass spectrometry (spICP-MS). The triple cascade amplification strategy consisted of an enhanced RecJ_f exonuclease-assisted target recycling amplification module, a hybridization chain reaction amplification module, and a signal amplification module based on DNA-templated multiple metal nanoclusters. In the enhanced RecJ_f exonuclease-assisted target recycling amplification module, the DNA bases at the 5' ends of aptamers for specific recognition of biomarkers were deliberately replaced by the corresponding RNA bases to enhance amplification efficiency. The signal amplification module based on DNA-templated multiple metal nanoclusters was innovatively used to amplify the signals measured by spICP-MS and at the same time effectively suppress possible background interferences. The proposed spICP-MS platform achieved satisfactory quantitative results for both carcinoembryonic antigen (CEA) and a-fetoprotein (AFP) in human serum samples with accuracy comparable to that of the commercial ELISA kits. Moreover, it has wide dynamic ranges for both CEA (0.01-100 ng/mL) and AFP (0.01-200 ng/mL). The limit of detection for CEA and AFP was 0.6 and 0.5 pg/mL, respectively. Compared with conventional biomarkers detection methods, the proposed spICP-MS platform has the advantages of operational simplicity, ultra-high sensitivity, wide dynamic range, and low background. Therefore, it is reasonable to expect that the proposed spICP-MS platform can be further developed to be a promising alternative tool for biomarker detection in fields of clinical diagnosis and biomedical research.

Bioimaging with Upconversion Nanoparticles

Bioimaging enables the spatiotemporal visualization of biological processes at various scales empowered by a range of different imaging modalities and contrast agents. Upconversion nanoparticles (UCNPs) represent a distinct type of such contrast agents with the potential to transform bioimaging due to their unique optical properties and functional design flexibilities. This review explores and discusses the opportunities, challenges, and limitations that UCNPs exhibit as bioimaging probes and highlights applications with spatial dimensions ranging from the single nanoparticle level to cellular, tissue, and whole animal imaging. We further summarized recent advancements in bioimaging applications enabled by UCNPs, including super-resolution techniques and multimodal imaging methods, and provide a perspective on the future potential of UCNP-based technologies in bioimaging research and clinical translation. This review may provide a valuable resource for researchers interested in exploring and applying UCNP-based bioimaging technologies.

Advances in upconversion luminescence nanomaterial-based biosensor for virus diagnosis

Various infectious viruses have been posing a major threat to global public health, especially SARS-CoV-2, which has already claimed more than six million lives up to now. Tremendous efforts have been made to develop effective techniques for rapid and reliable pathogen detection. The unique characteristics of upconversion nanoparticles (UCNPs) pose numerous advantages when employed in biosensors, and they are a promising candidate for virus detection. Herein, this Review will discuss the recent advancement in the UCNP-based biosensors for virus and biomarkers detection. We summarize four basic principles that guide the design of UCNP-based biosensors, which are utilized with luminescent or electric responses as output signals. These strategies under fundamental mechanisms facilitate the enhancement of the sensitivity of UCNP-based biosensors. Moreover, a detailed discussion and benefits of applying UCNP in various virus bioassays will be presented. We will also address some obstacles in these detection techniques and suggest routes for progress in the field. These progressions will undoubtedly pose UCNP-based biosensors in a prominent position for providing a convenient, alternative approach to virus detection.

Molecularly Imprinted Polymer Functionalized Bi2S3/Ti3C2TX MXene Nanocomposites for Photoelectrochemical/Electrochemical Dual-Mode Sensing of Chlorogenic Acid

We report the proof-of-concept of molecularly imprinted polymer (MIP) functionalized Bi2S3/Ti3C2TX MXene nanocomposites for photoelectrochemical (PEC)/electrochemical (EC) dual-mode sensing of chlorogenic acid (CGA). Specifically, the in-situ growth of the Bi2S3/Ti3C2TX MXene served as a transducer substrate for molecularly imprinted polymers such as PEC and EC signal generators, due to its high surface area, suitable bandwidth and abundant active sites. In addition, the chitosan as a binder was encapsulated into MIP by means of phase inversion on a fluorine-doped tin dioxide (FTO) electrode. In the determination of CGA as an analytical model, the dual-mode sensor based on MIP functionalized Bi2S3/Ti3C2TX MXene nanocomposites had good selectivity, excellent stability and acceptable reproducibility, which displayed a linear concentration range from 0.0282 μM to 2824 μM for the PEC signal and 0.1412 μM to 22.59 μM for the EC signal with a low detection limit of 2.4 nM and 43.1 nM, respectively. Importantly, two dual-response mode with different transduction mechanisms could mutually conform to dramatically raise the reliability and accuracy of detection compared to single-mode detection. This work is a breakthrough for the design of dual-mode sensors and will provide a reasonable basis for the construction of dual-mode sensor platforms.

Recent Developments and Future Perspective on Electrochemical Glucose Sensors Based on 2D Materials

Diabetes is a health disorder that necessitates constant blood glucose monitoring. The industry is always interested in creating novel glucose sensor devices because of the great demand for low-cost, quick, and precise means of monitoring blood glucose levels. Electrochemical glucose sensors, among others, have been developed and are now frequently used in clinical research. Nonetheless, despite the substantial obstacles, these electrochemical glucose sensors face numerous challenges. Because of their excellent stability, vast surface area, and low cost, various types of 2D materials have been employed to produce enzymatic and nonenzymatic glucose sensing applications. This review article looks at both enzymatic and nonenzymatic glucose sensors made from 2D materials. On the other hand, we concentrated on discussing the complexities of many significant papers addressing the construction of sensors and the usage of prepared sensors so that readers might grasp the concepts underlying such devices and related detection strategies. We also discuss several tuning approaches for improving electrochemical glucose sensor performance, as well as current breakthroughs and future plans in wearable and flexible electrochemical glucose sensors based on 2D materials as well as photoelectrochemical sensors.

Cuprous oxide coated silver/graphitic carbon nitride/cadmium sulfide nanocomposite heterostructure: Specific recognition of carcinoembryonic antigen through sandwich-type mechanism

The development of the effective diagnostic method for the determination of cancer biomarkers is one of the most promising strategies for early clinical diagnosis of cancer. Here, based on the preparation of heterogeneous cuprous oxide coated silver (Ag@Cu₂O) nanocomposites/graphitic carbon nitride (g-C₃N₄)/cadmium sulfide (CdS) nanoarrays structure, a highly sensitive photoelectrochemical (PEC) biosensor for the examination of carcinoembryonic antigen (CEA) has been constructed successfully. The combination of photoactive semiconductor materials g-C₃N₄ and CdS increases the electron transfer rate between them and enhances their photocurrent response, thus greatly increasing the concentration detection range. At the same time, the specific recognition between antigen and antibody is used to form a sandwich structure secondary antibody (Ab₂)/CEA/antibody (Ab₁). And because Ag@Cu₂O has the function of absorbing light and consuming electron donor. Therefore, the successful measurement of CEA was achieved by labeling Ag@Cu₂O on Ab₂ and finally immobilizing it on the sensor to correlate the current reduction with the CEA concentration. The sandwich PEC biosensor proposed by this signal amplification strategy under optimal conditions has good analytical performance for CEA, with a wide linear detection range (from 10^-5 to 1 ng/mL) and a low detection limit of 0.0011 pg/mL. The PEC biosensor constructed by this method showed high sensitivity, excellent anti-interference ability, favourable repeatability, and good stability.

Activators Confined Upconversion Nanoprobe with Near-Unity Förster Resonance Energy Transfer Efficiency for Ultrasensitive Detection

Lanthanide-doped upconversion nanoparticles (UCNPs) as energy donors for Förster resonance energy transfer (FRET) are promising in biosensing, bioimaging, and therapeutic applications. However, traditional FRET-based UC nanoprobes show low efficiency and poor sensitivity because only partial activators in UCNPs possessing suitable distance with energy acceptors (<10 nm) can activate the FRET process. Herein, a novel excited-state energy distribution-modulated upconversion nanostructure is explored for highly efficient FRET. Integration of the optimal 4% Er³⁺ doped shell and 100% Yb³⁺ core achieves ∼4.5-fold UC enhancement compared with commonly used NaYF₄:20%Yb³⁺,2%Er³⁺ nanoparticles, enabling maximum donation of excitation energy to an acceptor. The spatial confinement strategy shortens significantly the energy-transfer distance (∼4.5 nm) and thus demonstrates experimentally a 91.9% FRET efficiency inside the neutral red (NR)-conjugated NaYbF₄@NaYF₄:20%Yb³⁺,4%Er³⁺ nanoprobe, which greatly outperforms the NaYbF₄@NaYF₄:20%Yb³⁺,4%Er³⁺@SiO₂@NR nanoprobe (27.7% efficiency). Theoretical FRET efficiency calculation and in situ single-nanoparticle FRET measurement further confirm the excellent energy-transfer behavior. The well-designed nanoprobe shows a much lower detection limit of 0.6 ng/mL and higher sensitivity and is superior to the reported NO₂^- probes. Our work provides a feasible strategy to exploit highly efficient FRET-based luminescence nanoprobes for ultrasensitive detection of analytes.

Lanthanide-Doped Upconversion Luminescent Nanoparticles-Evolving Role in Bioimaging, Biosensing, and Drug Delivery

Upconverting luminescent nanoparticles (UCNPs) are "new generation fluorophores" with an evolving landscape of applications in diverse industries, especially life sciences and healthcare. The anti-Stokes emission accompanied by long luminescence lifetimes, multiple absorptions, emission bands, and good photostability, enables background-free and multiplexed detection in deep tissues for enhanced imaging contrast. Their properties such as high color purity, high resistance to photobleaching, less photodamage to biological samples, attractive physical and chemical stability, and low toxicity are affected by the chemical composition; nanoparticle crystal structure, size, shape and the route; reagents; and procedure used in their synthesis. A wide range of hosts and lanthanide ion (Ln³⁺) types have been used to control the luminescent properties of nanosystems. By modification of these properties, the performance of UCNPs can be designed for anticipated end-use applications such as photodynamic therapy (PDT), high-resolution displays, bioimaging, biosensors, and drug delivery. The application landscape of inorganic nanomaterials in biological environments can be expanded by bridging the gap between nanoparticles and biomolecules via surface modifications and appropriate functionalization. This review highlights the synthesis, surface modification, and biomedical applications of UCNPs, such as bioimaging and drug delivery, and presents the scope and future perspective on Ln-doped UCNPs in biomedical applications.

Enhancement of Upconversion Luminescence by the Construction of a 3Yb-Er-Hf Sublattice Energy Cluster and Surface Defect Elimination

Nanotetragonal LiYF₄:RE (Tm,Er,Ho) is a kind of excellent upconversion luminescence (UCL) material potentially used in many fields, while the enhancement of UC emission and regulation of luminescence lifetime are still a challenge. Herein, a strategy was reported to enhance UCL performance with the aid of the construction of a 3Yb-Er-Hf sublattice energy cluster with the introduction of Hf⁴⁺ and the interception of surface defect fluorescence quenching. UCL was obviously decreased by Hf⁴⁺ doping without surface defect elimination, but after the interception of surface defect quenching, UCL was dramatically enhanced more than 300-fold with an Er³⁺/Hf⁴⁺ mole ratio of 1:1. The contribution of UCL enhancement by the construction of a 3Yb-Er-Hf sublattice energy cluster is about 1.5 times of the sample without energy cluster construction. Interestingly, the lifetime of UCL can also be regulated by this strategy. According to the results of systematical microstructure analyses and UCL performance behaviors examined by X-ray powder diffraction (XRD), small-angle X-ray scattering (SAXS), transmission electron microscopy (TEM), nuclear magnetic resonance (NMR), and fluorescence spectrophotometry (FS) methods, the possible mechanism of UCL enhancement was proposed. This work may be an inspiration for researchers to design and develop high-performance UCL nanomaterials.

A Photoelectrochemical Platform Based on Polyaniline-Modified Titanium Dioxide Facet Heterostructure

A photoelectrochemical (PEC) electrode for glucose detection was built based on polyaniline (PANI) modified titanium dioxide heterojunction (FH-TiO₂) structures. Ultrathin titanium dioxide (TiO₂) nanosheets are assembled onto rutile nanorods (TiO₂ NRs). Experiments show that the main exposed faces of these nanosheets are (101) or (111) crystal planes. Proven by theoretical calculation, the bottom of the conduction band (CB) of (111) is 0.15 eV lower than the bottom of the conduction band of (101). Therefore, when the material is excited by light, photogenerated electrons are able to transfer from the conduction band of (101) to the conduction band of (111). PANI was introduced as a medium to effectively conduct photogenerated charges between glucose oxidase and titanium dioxide. A photoelectric detection electrode for glucose was fabricated by loading glucose oxidase onto PANI@FH-TiO₂. This electrode showed excellent performance in 0.2-1.0 mM linear range with a sensitivity 15.63 μA mM^-1 cm^-2 and 1.0-15.0 mM linear range with a sensitivity of 1.42 μA mM^-1 cm^-2.

Photoelectrochemical Antibacterial Platform Based on Rationally Designed Black TiO2-x Nanowires for Efficient Inactivation against Bacteria

A hyphenated strategy for photoelectrochemical (PEC) disinfection is proposed with rationally designed black TiO_2-x as a photoresponsive material. The PEC method, a fusion of electrochemistry and photocatalysis, is an innovative and effective way to improve photocatalytic performance, which imparts certain properties to the photoelectrode and greatly promotes the charge transfer, thus effectively inhibiting the recombination of carriers and greatly promoting the catalytic efficiency. The oxygen vacancy (V_o) engineering on TiO₂ is conducted to obtain black TiO_2-x, which shows a much larger light absorption region in the full solar spectrum than the pristine white TiO₂ and presents excellent PEC sterilization performance. The bactericidal efficiency with the PEC method is 10 times higher than that with the photocatalytic method, inactivating 99% of bacteria within a short time of 30 min. In addition, the black titanium oxide nanowires (B-TiO_2-x NWs) are grown on flexible carbon cloth (CC) to form a sandwich structural self-cleaning face mask. The bacteria adhering to the surface of the mask will be sterilized quickly and efficiently under the illumination of visible light. The face mask with the characteristics of superior antibacterial effect and long service lifetime will be used for epidemic prevention and reduce the second pollution.

Highly accurate and label-free discrimination of single cancer cell using a plasmonic oxide-based nanoprobe

The detection of cancer cells at the single-cell level enables many novel functionalities such as next-generation cancer prognosis and accurate cellular analysis. While surface-enhanced Raman spectroscopy (SERS) has been widely considered as an effective tool in a low-cost and label-free manner, however, it is challenging to discriminate single cancer cells with an accuracy above 90% mainly due to the poor biocompatibility of the noble-metal-based SERS agents. Here, we report a dual-functional nanoprobe based on dopant-driven plasmonic oxides, demonstrating a maximum accuracy above 90% in distinguishing single THP-1 cell from peripheral blood mononuclear cell (PBMC) and human embryonic kidney (HEK) 293 from human macrophage cell line U937 based on their SERS patterns. Furthermore, this nanoprobe can be triggered by the bio-redox response from individual cells towards stimuli, empowering another complementary colorimetric cell detection, approximately achieving the unity discrimination accuracy at a single-cell level. Our strategy could potentially enable the future accurate and low-cost detection of cancer cells from mixed cell samples.