Upconversion Fluorescent Aptasensor for Polychlorinated Biphenyls Detection Based on Nicking Endonuclease and Hybridization Chain Reaction Dual-Amplification Strategy

Genetically engineered virus-like particle-armoured and multibranched DNA scaffold-corbelled ultra-sensitive hierarchical hybridization chain reaction for targeting-enhanced imaging in living biosystems under spatiotemporal light powering

Although nucleic acids-based fluorescent biosensors, exemplified by the hybridization chain reaction (HCR), have exhibited promise as an imaging tool for detecting disease-related biomolecular makers in living biosystems, they still face certain challenges. These include the need for improved sensitivity, poor bio-targeting capability, the absence of signal enrichment interface and the uncontrollable biosensing initiation. Herein, we present a range of effective solutions. First, a stacking design resembling building blocks is used to construct a special hierarchical HCR (termed H-HCR), for which a hierarchical bridge is employed to graft multiunit HCR products. Furthermore, the H-HCR components are encapsulated into a virus-like particle (VLP) endowed with a naturally peptide-mediated targeting unit through genetic engineering of plasmids, after which the biosensor can specifically identify cancer cytomembranes. By further creating a multibranched DNA scaffold to enrich the H-HCR produced detection signals, the biosensor's analyte recognition module is inserted with a photocleavage-linker, allowing that the biosensing process can be spatiotemporally initiated via a light-powered behavior. Following these innovations, this genetically engineered VLP-armoured and multibranched DNA-scaffold-corbelled H-HCR demonstrates an ultra-sensitive and specific biosensing performance to a cancer-associated microRNA marker (miRNA-155). Beyond the worthy in vitro analysis, our method is also effective in performing imaging assays for such low-abundance analyte in living cells and even bodies, thus providing a roust platform for disease diagnosis.

Integrating CRISPR-Cas12a with catalytic hairpin assembly as a logic gate biosensing platform for the detection of polychlorinated biphenyls in water samples

Polychlorinated biphenyls (PCBs) are ubiquitous persistent organic pollutants that cause harmful effects on environmental safety and human health. There is an urgent need to develop an intelligent method for PCBs sensing. In this work, we proposed a logic gate biosensing platform for simultaneous detection of multiple PCBs. 2,3',5,5'-tetrachlorobiphenyl (PCB72) and 3,3',4,4'-tetrachlorobiphenyl (PCB77) were used as the two inputs to construct biocomputing logic gates. We used 0 and 1 to encode the inputs and outputs. The aptamer was used to recognize the inputs and release the trigger DNA. A catalytic hairpin assembly (CHA) module is designed to convert and amplify each trigger DNA into multiple programmable DNA duplexes, which initiate the trans-cleavage activity of CRISPR/Cas12a for the signal output. The activated Cas12 cleaves the BHQ-Cy5 modified single-stranded DNA (ssDNA) to yield the fluorescence reporting signals. In the YES logic gate, PCB72 was used as the only input to carry out the logic operation. In the OR, AND, and INHIBIT logic gates, PCB72 and PCB77 were used as the two inputs. The output signals can be visualized by the naked eye under UV light transilluminators or quantified by a microplate reader. Our constructed biosensing platform possesses the merits of multiple combinations of inputs, intuitive digital output, and high flexibility and scalability, which holds great promise for the intelligent detection of different PCBs.

The development of a fluorescence/colorimetric biosensor based on the cleavage activity of CRISPR-Cas12a for the detection of non-nucleic acid targets

Nano-biosensors are of great significance for the analysis and detection of important biological targets. Surprisingly, the CRISPR-Cas12a system not only provides us with excellent gene editing capabilities, it also plays an important role in biosensing due to its high base resolution and high levels of sensitivity. However, most CRISPR-Cas12a-based sensors are limited by their recognition and output modes, are therefore only utilized for the detection of nucleic acids using fluorescence as an output signal. In the present study, we further explored the potential application of CRISPR-Cas12a and developed a CRISPR-Cas12a-based fluorescence/colorimetric biosensor (UCNPs-Cas12a/hydrogel-MOF-Cas12a) that provides an efficient targeting system for small molecules and protein targets. These two sensors yield multiple types of signal outputs by converting the target molecule into a deoxyribonucleic acid (DNA) signal input system using aptamers, amplifying the DNA signal by catalyzed hairpin assembly (CHA), and then combining CRISPR-Cas12a with various nanomaterials. UCNPs-Cas12a/hydrogel-MOF-Cas12a exhibited prominent sensitivity and stability for the detection of estradiol (E2) and prostate-specific antigen (PSA), and was successfully applied for the detection of these targets in milk and serum samples. A major advantage of the hydrogel-MOF-Cas12a system is that the signal output can be observed directly. When combined with aptamers and nanomaterials, CRISPR-Cas12a can be used to target multiple targets, with a diverse array of signal outputs. Our findings create a foundation for the development of CRISPR-Cas12a-based technologies for application in the fields of food safety, environmental monitoring, and clinical diagnosis.

Advancements in nanomaterial-based aptasensors for the detection of emerging organic pollutants in environmental and biological samples

The combination of nanomaterials (NMs) and aptamers into aptasensors enables highly specific and sensitive detection of diverse pollutants. The great potential of aptasensors is recognized for the detection of diverse emerging organic pollutants (EOPs) in different environmental and biological matrices. In addition to high sensitivity and selectivity, NM-based aptasensors have many other advantages such as portability, miniaturization, facile use, and affordability. This work showcases the recent advances achieved in the design and fabrication of NM-based aptasensors for monitoring EOPs (e.g., hormones, phenolic contaminants, pesticides, and pharmaceuticals). On the basis of their sensing mechanisms, the covered aptasensing systems are classified as electrochemical, colorimetric, PEC, fluorescence, SERS, and ECL. Special attention has been paid to the fabrication processes, analytical achievements, and sensing mechanisms of NM-based aptasensors. Further, the practical utility of aptasensing approaches has also been assessed based on their basic performance metrics (e.g., detection limits, sensing ranges, and response times).

A Comprehensive Review on Upconversion Nanomaterials-Based Fluorescent Sensor for Environment, Biology, Food and Medicine Applications

Near-infrared-excited upconversion nanoparticles (UCNPs) have multicolor emissions, a low auto-fluorescence background, a high chemical stability, and a long fluorescence lifetime. The fluorescent probes based on UCNPs have achieved great success in the analysis of different samples. Here, we presented the research results of UCNPs probes utilized in analytical applications including environment, biology, food and medicine in the last five years; we also introduced the design and construction of upconversion optical sensing platforms. Future trends and challenges of the UCNPs used in the analytical field have also been discussed with particular emphasis.

Advances in Optical Sensors for Persistent Organic Pollutant Environmental Monitoring

Optical chemical sensors are widely applied in many fields of modern analytical practice, due to their simplicity in preparation and signal acquisition, low costs, and fast response time. Moreover, the construction of most modern optical sensors requires neither wire connections with the detector nor sophisticated and energy-consuming hardware, enabling wireless sensor development for a fast, in-field and online analysis. In this review, the last five years of progress (from 2017 to 2021) in the field of optical chemical sensors development for persistent organic pollutants (POPs) is provided. The operating mechanisms, the transduction principles and the types of sensing materials employed in single selective optical sensors and in multisensory systems are reviewed. The selected examples of optical sensors applications are reported to demonstrate the benefits and drawbacks of optical chemical sensor use for POPs assessment.

Target biorecognition-triggered assembly of a G-quadruplex DNAzyme-decorated nanotree for the convenient and ultrasensitive detection of antibiotic residues

The abuse of kanamycin (Kana) in many fields has led to increasing antibiotic pollution problems and serious threats to public health. Therefore, determining how to develop methods to realize the convenient detection of antibiotics in complicated environmental matrices is highly desirable. In this study, we utilized a target biorecognition-triggered hybridization chain reaction (HCR) assembly of a G-quadruplex DNAzyme (G-DNAzyme)-decorated nanotree to develop a novel homogeneous colorimetric biosensing method for the convenient and ultrasensitive detection of Kana antibiotic residues in real samples. Through the designed aptamer-recognition reaction, an Mg²⁺-dependent DNAzyme (MNAzyme) strand can be liberated. Thus, its catalyzed cleavage of the hairpin substrates anchored at a DNA nanowire will cause the assembled formation of an HCR-initiator; this process can be greatly amplified by the exonuclease III-assisted target recycling and the MNAzyme-catalyzed release of another MNAzyme strand. Based on the DNA-nanowire-accelerated HCR assembly of many G-DNAzyme-decorated DNA duplexes on the two sides of the nanowire, a DNA nanotree decorated by numerous G-DNAzymes will form to realize the ultrasensitive colorimetric signal output. Under the optimal conditions, this method exhibited a wide five-order-of-magnitude linear range and a very low detection limit of 28 fg mL^-1. In addition, excellent selectivity, repeatability, and reliability were also demonstrated for this homogeneous bioassay method. These unique features along with its automatic manipulation and low assay cost show promise for practical applications.

Graphene Based Nanohybrid Aptasensors in Environmental Monitoring: Concepts, Design and Future Outlook

In view of ever-increasing environmental pollution, there is an immediate requirement to promote cheap, multiplexed, sensitive and fast biosensing systems to monitor these pollutants or contaminants. Aptamers have shown numerous advantages in being used as molecular recognition elements in various biosensing devices. Graphene and graphene-based materials/nanohybrids combined with several detection methods exhibit great potential owing to their exceptional optical, electronic and physicochemical properties which can be employed extensively to monitor environmental contaminants. For environmental monitoring applications, aptamers have been successfully combined with graphene-based nanohybrids to produce a wide range of innovative methodologies. Aptamers are immobilized at the surface of graphene based nanohybrids via covalent and non-covalent strategies. This review highlights the design, working principle, recent developmental advances and applications of graphene based nanohybrid aptasensors (GNH-Apts) (since January 2014 to September 2021) with a special emphasis on two major signal-transduction methods, i.e., optical and electrochemical for the monitoring of pesticides, heavy metals, bacteria, antibiotics, and organic compounds from different environmental samples (e.g., water, soil and related). Lastly, the challenges confronted by scientists and the possible future outlook have also been addressed. It is expected that high-performance graphene-based nanohybrid aptasensors would find broad applications in the field of environmental monitoring.

Dual Sensitization Smartphone Colorimetric Strategy Based on RCA Coils Gathering Au Tetrahedra and Its Application in the Detection of CK-MB

In recent years, the combination of DNA nanotechnology and biosensing has been extensively reported. Herein, we attempted to develop a dual sensitization smartphone colorimetric strategy based on rolling circle amplification (RCA) coils gathering Au tetrahedra and explore its application. The dual sensitization effect of this strategy was achieved by rolling circle amplification (RCA) and Au tetrahedra. Under the initiation of the complementary DNA, a large number of ssDNA were generated, achieving amplification of the reaction signal. At the same time, due to the formation of Au tetrahedra, more gold nanoparticles could be gathered under the same conditions, and the signal would be amplified again. Using software ImageJ, the gray value of the reaction solution can be analyzed, detecting the target timely under the practical conditions of lack of equipment. By selecting aptamers with strong binding affinity, we applied this strategy to detect creatine kinase isoenzymes (CK-MB), showing a limit of detection of 0.8 pM, which performed well in actual detection and can meet the needs for real-time detection of CK-MB. Therefore, a universal detection platform was developed, which has broad application prospects in biosensing, clinical diagnosis, food detection, and other fields.

Visual Test Paper for on-Site Polychlorinated Biphenyls Detection and Its Logic Gate Applications

A visual detection method was proposed for polychlorinated biphenyls (PCBs) detection using lateral flow test paper as the sensing platform. The aptamer sequence was used to recognize the target 3,3',4,4'-tetrachlorobiphenyl (PCB77). The integration of Zn²⁺-dependent DNAzyme with toehold-mediated strand displacement reaction significantly improved the response signals. Gold nanoparticles were utilized as the signal tracers in the test paper, making the results visible directly by the naked eye. Under optimal conditions, the paper enables the visual detection of PCB77 as low as 10 pM without additional instrumentation. The assay displays a high selectivity for PCB77 against potential interfering molecules. The visual test paper is robust and has been applied to the detection of PCB77 in milk samples with good recovery and satisfactory accuracy. Using two different PCBs (PCB77 and PCB72) as inputs, we further fabricated OR and AND logic gates, which is conducive to the development of an intelligent detection strategy for PCBs monitoring. Given the attractive characteristics of disposability, low cost, logic operation, and intuitive output, the test paper shows great promise for on-site screening of PCBs in resource-limited areas.

Lanthanide ion (Ln3+ )-based upconversion sensor for quantification of food contaminants: A review

The food safety issue has gradually become the focus of attention in modern society. The presence of food contaminants poses a threat to human health and there are a number of interesting researches on the detection of food contaminants. Upconversion nanoparticles (UCNPs) are superior to other fluorescence materials, considering the benefits of large anti-Stokes shifts, high chemical stability, non-autofluorescence, good light penetration ability, and low toxicity. These properties render UCNPs promising candidates as luminescent labels in biodetection, which provides opportunities as a sensitive, accurate, and rapid detection method. This paper intended to review the research progress of food contaminants detection by UCNPs-based sensors. We have proposed the key criteria for UCNPs in the detection of food contaminants. Additionally, it highlighted the construction process of the UCNPs-based sensors, which includes the synthesis and modification of UCNPs, selection of the recognition elements, and consideration of the detection principle. Moreover, six kinds of food contaminants detected by UCNPs technology in the past 5 years have been summarized and discussed fairly. Last but not least, it is outlined that UCNPs have great potential to be applied in food safety detection and threw new insight into the challenges ahead.

Aptamer-modified sensitive nanobiosensors for the specific detection of antibiotics

The overuse or abuse of quinolone antibiotics such as enrofloxacin (ENR) in veterinary medicine results in the presence of their residues in food and environment. Thus, a sensitive method is needed to detect them. Herein, we demonstrate a fluorescence resonance energy transfer (FRET) based aptasensor for ENR detection, using core-shell upconversion nanoparticles (CSUNPs) as an energy donor and graphene oxide (GO) as an energy acceptor. The core-shell structure and Gd3+ doping significantly increased the fluorescence intensity of CSUNPs and the FRET efficiency. The ENR aptamer was conjugated to CSUNPs through ligand exchange, and the π-π stacking between the aptamer and GO brought the aptamer-modified CSUNPs to the surface of the GO sheets, resulting in the formation of a CSUNP-GO complex and the subsequent quenching of CSUNP fluorescence. As a result, an aptasensor was established with the fluorescence of CSUNPs correlated with the ENR concentration within the range of 0.976 ng mL-1 to 62.5 ng mL-1, allowing ENR to be detected at a limit of 0.47 ng mL-1. This method reduced the detection limit by approximately 13-fold in 2 h compared to the commercial enzyme-linked immunosorbent assay (ELISA) kit. The aptasensor could also be applied to detect ENR from commercial milk powder samples with a detection limit of 1.59 ng mL-1, which was far below the regulated maximum residue limit of ENR in milk. The aptasensor could not detect other antibiotics, suggesting its good specificity towards ENR. Our work demonstrates a highly selective, sensitive and cost-effective method for detecting antibiotic residues in veterinary medicine. Since the aptamer can be switched to one recognizing another antibiotic, the aptasensors are used as a plug-and-play platform that can detect a variety of antibiotics.

An electrochemical platform based on a hemin-rGO-cMWCNTs modified aptasensor for sensitive detection of kanamycin

Kanamycin (KANA) residue in meat is particularly harmful to public health and there is an urgent need to establish a fast, accurate and low-cost method to determinate KANA in food quality control. In this paper, hemin-reduced graphene oxide-carboxylated multiwalled carbon nanotubes (hemin-rGO-cMWCNTs) were designed and prepared, and the characteristics of hemin-rGO-cMWCNTs are presented. After that, an aptamer/hemin-rGO-cMWCNTs sensor for determination of KANA was developed. The electrochemical characteristics were studied by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Under optimal conditions, the sensitive response of the aptasensor towards KANA presented a wide concentration range of 10-9 to 10-6 M and a low detection limit of 0.36 nM (S/N = 3). Meanwhile, the aptasensor showed prominent selectivity, high stability and acceptable reproducibility in the application of KANA detection. In addition, the aptasensor detection in real samples correlated well with that obtained by liquid chromatograph mass spectrometer (LCMS).

Construction of DNA Biosensors for Mercury (II) Ion Detection Based on Enzyme-Driven Signal Amplification Strategy

Mercury ion (Hg²⁺) is a well-known toxic heavy metal ion. It is harmful for human health even at low concentrations in the environment. Therefore, it is very important to measure the level of Hg²⁺. Many methods, reviewed in several papers, have been established on DNA biosensors for detecting Hg²⁺. However, few reviews on the strategy of enzyme-driven signal amplification have been reported. In this paper, we reviewed this topic by dividing the enzymes into nucleases and DNAzymes according to their chemical nature. Initially, we introduce the nucleases including Exo III, Exo I, Nickase, DSN, and DNase I. In this section, the Exo III-driven signal amplification strategy was described in detail. Because Hg²⁺ can help ssDNA fold into dsDNA by T-Hg-T, and the substrate of Exo III is dsDNA, Exo III can be used to design Hg²⁺ biosensor very flexibly. Then, the DNAzyme-assisted signal amplification strategies were reviewed in three categories, including UO₂²⁺-specific DNAzymes, Cu²⁺-specific DNAzymes and Mg²⁺-specific DNAzymes. In this section, the Mg²⁺-specific DNAzyme was introduced in detail, because this DNAzyme has highly catalytic activity, and Mg²⁺ is very common ion which is not harmful to the environment. Finally, the challenges and future perspectives were discussed.

Dye-sensitized core-shell NaGdF4:Yb,Er@NaGdF4:Yb,Nd upconversion nanoprobe for determination of H2S

The core-shell NaGdF₄:Yb,Er@NaGdF₄:Yb,Nd upconversion nanoparticles (UCNPs) were successfully obtained with the method of co-precipitation, and the water-solubility of UCNPs was improved by the ligand exchange reaction between nitrosyl tetrafluoroborate (NOBF₄) and nanoparticles. The IR-783 dye with negative charge and NOBF₄-UCNPs with positive charge can bind together by electrostatic action to sensitize UCNPs through the energy transfer from IR-783 to UCNPs. However, with the presence of Na₂S (a commonly used H₂S donor), a highly selective reaction between H₂S and IR-783, which destoried the structure of IR-783 and blocked the energy transfer, thus led to the quenching of luminescent intensity. Based on this, a sensing system for determination of H₂S has been constructed successfully. The linear range of H₂S detection by this system is 0.5-15 μM, and the detection limit is 34.17 nM. Furthermore, the dye-sensitized core-shell NaGdF₄:Yb,Er@NaGdF₄:Yb,Nd upconversion nanoprobe was applied to real sample analysis with satisfactory results.

Highly sensitive and selective detection of PCB 77 using an aptamer-catalytic hairpin assembly in an aquatic environment

Polychlorinated biphenyls (PCBs) are synthetic organic compounds that are extremely difficult to break down in water and can accumulate in human fat and organisms. However, methods that can be used to detect large amounts of PCBs remain unsatisfactory, as they are generally overly sensitive and involve complex operations. An aptamer-based catalytic hairpin assembly (aptamer-CHA) reaction for the selective detection of 3,3′,4,4′-tetrachlorobiphenyl (PCB 77) was developed. It combines the advantages of aptamers and signal amplification reactions. The aptamer selectivity recognizes the target, PCB 77, which triggers the sensitive CHA reaction to produce a fluorescence signal. CHA is a sensitive enzyme-free signal amplification method suitable for on-site detection. Therefore, the identification aptamer is the basis for the quantitative detection of PCB 77, with a detection range of 0.01 μg L⁻¹ to 500 μg L⁻¹ and a detection limit of 0.01 μg L⁻¹. In this study, the aptamer was used to improve the selectivity of the reaction, and the CHA reaction improved the sensitivity of the detection system. Such high-sensitivity PCB detection capabilities with simplified procedures may be useful for real-time field detection and other monitoring tasks. This method can be used as a rapid fluorescence detection strategy for other targets in aquatic environments.

The fluorescence sensing strategy was used to detect PCB77 based on the aptamer-complex and catalytic hairpin assembly.

Target triggered ultrasensitive electrochemical polychlorinated biphenyl aptasensor based on DNA microcapsules and nonlinear hybridization chain reaction

In this work, we demonstrated an ultrasensitive detection platform for polychlorinated biphenyls (PCBs) based on DNA microcapsules and a nonlinear hybridization chain reaction (NHCR). In the process, first, electrochemical signal molecules (Methylene Blue, MB) were sealed in the prepared DNA microcapsules. In the presence of PCB-72, DNA microcapsules could be dissociated with the conjugation of the aptamer and target, and meanwhile, the released DNA strand could initiate the NHCR and trigger the chain branching growth of DNA dendrimers. Because the released MBs were intercalated into the DNA dendrimer, enhanced electrochemical responses could be detected. This method exhibited ultrahigh sensitivity to PCB-72 with a detection limit of 0.001 ng mL-1. Furthermore, the present aptasensor was also capable of discriminating different PCB congeners. Therefore, the devised label-free and enzyme-free amplification electrochemical aptasensor strategy has great potential for the detection of PCB-72 in real samples, and this strategy may also become an attractive alternative for sensitive and selective small molecule, protein, nucleic acid and nuclease activity detection.

Reprogrammable Gel Electrophoresis Detection Assay Using CRISPR-Cas12a and Hybridization Chain Reaction

Hybridization chain reaction (HCR) is a DNA-based target-induced cascade reaction. Due to its unique enzyme-free amplification feature, HCR is often employed for sensing applications. Much like DNA nanostructures that have been designed to respond to a specific stimulus, HCR employs nucleic acids that reconfigure and assemble in the presence of a specific trigger. Despite its standalone capabilities, HCR is highly modular; therefore, it can be advanced and repurposed when coupled with latest discoveries. To this effect, we have developed a gel electrophoresis-based detection approach which combines the signal amplification feature of HCR with the programmability and sensitivity of the CRISPR-Cas12a system. By incorporating CRISPR-Cas12a, we have achieved greater sensitivity and reversed the signal output from TURN OFF to TURN ON. CRISPR-Cas12a also enabled us to rapidly reprogram the assay for the detection of both ssDNA and dsDNA target sequences by replacing a single reaction component in the detection kit. Detection of conserved, both ssDNA and dsDNA, regions of tobacco curly shoot virus (TCSV) and hepatitis B virus (HepBV) genomes is demonstrated with this methodology. This low-cost gel electrophoresis assay can detect as little as 1.5 fmol of the target without any additional target amplification steps and is about 100-fold more sensitive than HCR-alone approach.

Recent advances on functional nucleic acid-based biosensors for detection of food contaminants

It has seen increasing development of reliable, robust, and flexible biosensors for rapid food-safety analysis in the past few decades. Recently, functional nucleic acid-based biosensors have attracted attention because of their programmability, bottom-up characteristics, and structural switches. However, few systematic reviews devoted to categorizing the potential of DNA nanostructures and devices were found for detecting food contaminants. Hence, the applications of functional nucleic acid-based biosensors were reviewed for analyzing food contaminants, including foodborne pathogen bacteria, biotoxins, heavy metals, and et al. In addition to categorizing the various biosensors, multiple signal readout strategies, such as optical, electrochemical, and mass-based signals were also examined. Finally, the future changes and potential opportunities, as well as practical applications of functional nucleic acid-based biosensors were discussed.

A fluorescent amplification strategy for high-sensitive detection of 17 β-estradiol based on EXPAR and HCR

Environmental endocrine disruptors in the environment and food, especially 17 β-estradiol (E2), are important factors affecting the growth and development of organisms. In this research, we constructed a fluorescence strategy for two-step amplification that combined two currently popular methods, exponential amplification reaction (EXPAR) and hybridization chain reaction (HCR). E2 competed with the complementary DNA (cDNA) to bind the aptamer modified on the magnetic beads. The free complementary strand in the supernatant was used as a trigger sequence to activate EXPAR, producing a large amount of short single-stranded DNA (ssDNA). The amplified ssDNA can trigger the second HCR amplification, producing many long double-stranded DNA (dsDNA) analogues. According to the principle of fluorescence resonance energy transfer, the carboxyfluorescein (FAM) signals in H1 and H2 hairpins were quenched by black hole quencher (BHQ-1). After the addition of E2 and initiation of amplification, the initially quenched fluorescent signal would be restored. This strategy with a detection limit of 0.37 pg mL^-1 (S/N = 3) showed a good linear relationship in the range of 0.4-800 pg mL^-1. In addition, the recovery rates of the method for milk and water samples were 98.55%-116.95% and 92.32%-107.00%, respectively. This is the first report of the combined detection of EXPAR and HCR, providing a reference for rapid and highly sensitive detection using multiple isothermal amplification methods.

A review: Recent advances in ultrasensitive and highly specific recognition aptasensors with various detection strategies

One of the most studied topics in analytical chemistry and physics is to develop bio-sensors. Aptamers are small single-stranded RNA or DNA oligonucleotides (5-25 kDa), which have advantages in comparison to their antibodies such as physicochemical stability and high binding specificity. They are able to integrate with proteins or small molecules, including intact viral particles, plant lectins, gene-regulation factor, growth factors, antibodies and enzymes. The aptamers have reportedly shown some unique characteristics, including long shelf-life, simple modification to provide covalent bonds to material surfaces, minor batch variation, cost-effectiveness and slight denaturation susceptibility. These features led important efforts toward the development of aptamer-based sensors, known as apta-sensors classified into optical, electrical and mass-sensitive based on the signal transduction mode. This review provided a number of current advancements in selecting, development criteria, and aptamers application with the focus on the effect of apta-sensors, specifically for disease-associated analyses. The review concentrated on the current reports of apta-sensors that are used for evaluating different food and environmental pollutants.

An amplification strategy for detecting HER2 with a quasi-targeted proteomics approach coupled with aptamer-triggered hybridization chain reaction

Human epidermal growth factor receptor 2 (HER2)-positive is a particularly aggressive type of the breast cancer. Because of the evidence has revealed that accurate HER2 status detection is crucial for prognosis and treatment strategy selection, great effort has been taken to develop assays for sensitive and accurate quantification of HER2. However, nonspecific amplification effect of most current assays limits the quantification accuracy of low abundance HER2. In the present work, we developed an LC-MS/MS-based quasi-targeted proteomics strategy coupled with hybridization chain reaction (HCR) for amplification of the HER2 protein signal. In the described strategy, the aptamer triggered the HCR system to undergo a cascade of hybridization events, with the two locked hairpins conjugated to the substrate peptide to form aptamer-HCR peptide probes. The membrane protein HER2 was recognized by probe and the signal was to be converted and then amplified into the mass response of the reporter peptide, which could be quantified using LC-MS/MS. The signal intensity was approximately five fold greater than that without signal amplification. Finally, the developed assay was applied for the quantitative analysis of HER2 in breast cell lines and monitor the dynamic change of HER2 in drug induced HER2 negative cells. The result demonstrated that combination of HCR signal amplification and mass spectrometry provides a novel approach for simple, accurate, and quantitative monitoring of low abundance protein.

Strategies for Constructing Upconversion Luminescence Nanoprobes to Improve Signal Contrast

Lanthanide-doped upconversion nanoparticles (UCNPs) can convert two or more lower-energy near-infrared photons to a single photon with higher energy, which makes them particularly suitable for constructing nanoprobes with large imaging depth and minimal interference of autofluorescence and light scattering from biosamples. Furthermore, they feature excellent photostability, sharp and narrow emissions, and large anti-Stokes shift, which confer them the capability of long-period bioimaging and real-time tracking. In recent years, UCNPs-based nanoprobes (UC-nanoprobes) have been attracting increasing interest in biological and medical research. Signal contrast, the ratio of signal intensity after and before the reaction of the probe and target, is the determinant factor of the sensitivity of all reaction-based probes. This progress report presents the methods of constructing UC-nanoprobes, with a focus fixed on recent strategies to improve the signal contrast, which have kept on promoting the bioapplication of this type of probe.

Affinity binding-mediated fluorometric protein assay based on the use of target-triggered DNA assembling probes and aptamers labelled with upconversion nanoparticles: application to the determination of platelet derived growth factor-BB

The target-triggered DNA assembling probe is presented for highly selective protein detection. Target-triggered DNA assembling is used in an amplification strategy based on affinity binding for identification and determination of proteins in general. Specifically, it was applied to the platelet derived growth factor-BB (PDGF-BB). A hairpin DNA (H-DNA) probe was designed containing (a) an aptamer domain for protein recognition and (b) a blocked DNAzyme domain for DNAzyme cleavage. An assistant DNA (A-DNA) probe containing aptamer and complementary domains was also employed to recognize protein and to induce DNA assembly. Once H-DNA and A-DNA recognize the same protein, H-DNA and A-DNA are in close proximity to each other. This induces DNA assembling for protein-triggered complex (Protein-Complex) with free DNAzyme domains. The free DNAzymes trigger the circular cleavage of molecular beacons for amplified signals. The assay is performed by fluorometry at an excitation wavelength of 980 nm and by collecting fluorescence at 545 nm. The platelet derived growth factor-BB (PDGF-BB) was accurately identified and selectively determined by this assay with a 22 pM detection limit (using the 3σ criterion). The responses for PDGF-BB is nearly 6-fold higher than for PDGF-AB, and 16-fold higher than PDGF-AA. This upconversion assay avoids any interference by the autofluorescence of biological fluids. Graphical abstractSchematic representation of the principle of the target-triggered DNA assembling probes mediated amplification strategy based on affinity binding for PDGF-BB. The UCNP probe is used for the quantitation of PDGF-BB with high selectivity.

Mesoporous Silica Containers and Programmed Catalytic Hairpin Assembly/Hybridization Chain Reaction Based Electrochemical Sensing Platform for MicroRNA Ultrasensitive Detection with Low Background

In this work, based on mesoporous silica containers (MSNs) with the programmed enzyme-free DNA assembly amplification of catalytic hairpin assembly (CHA) and hybridization chain reaction (HCR), an ultrasensitive electrochemical sensing platform with low background is developed for the detection of microRNA (miRNA). Herein, the electrochemical reporter methylene blue (MB) was sealed in the pores of MSNs by the double-stranded DNA (dsDNA) gate of hairpin DNA H1 and anchor DNA. In the absence of target, neither the CHA nor the HCR process happened, which enabled a low background. After target was added, DNA H1 was displaced from the MSNs surface and participated in the CHA process with the assistance of hairpin DNA H2, which accelerated the release of MB from the MSNs pore. Meanwhile, the CHA products H1-H2 were hybridized with the capture probes (SH-CP) on the electrode surface, which further initiated the HCR process. The released MB from the MSNs will effectively intercalate into long dsDNA polymers of HCR products, resulting in a significant electrochemical response. Taking miRNA-21 as the model target, the proposed sensing platform achieves a satisfactory detection limit down to 0.037 fM, which is lower than that of electrochemical assay with amplification methods. In addition, the strategy shows good selectivity against other miRNAs and is capable in practical analytes. Benefitting from the features of being label-free and enzyme-free and having low background, high sensitivity, and selectivity, this strategy shows great potential in bioanalysis and clinical diagnostics.

Ultrasensitive Microfluidic Paper-Based Electrochemical Biosensor Based on Molecularly Imprinted Film and Boronate Affinity Sandwich Assay for Glycoprotein Detection

In this work, we proposed a strategy that combined molecularly imprinted polymers (MIPs) and hybridization chain reaction into microfluidic paper-based analytical devices for ultrasensitive detection of target glycoprotein ovalbumin (OVA). During the fabrication, Au nanorods with a large surface area and superior conductibility were grown on paper cellulosic fiber as a matrix to introduce a boronate affinity sandwich assay. The composite of MIPs including 4-mercaptophenylboronic acid (MPBA) was able to capture target glycoprotein OVA. SiO₂@Au nanocomposites labeled MPBA and cerium dioxide (CeO₂)-modified nicked DNA double-strand polymers (SiO₂@Au/dsDNA/CeO₂) as a signal tag were captured into the surface of the electrode in the presence of OVA. An electrochemical signal was generated by using nanoceria as redox-active catalytic amplifiers in the presence of 1-naphthol in electrochemical assays. As a result, the electrochemical assay was fabricated and could be applied in the detection of OVA in the wide linear range of 1 pg/mL to 1000 ng/mL with a relatively low detection limit of 0.87 pg/mL (S/N = 3). The results indicated that the proposed platform possessed potential applications in clinical diagnosis and other related fields.

Recent progress in the development of recognition bioelements for polychlorinated biphenyls detection: Antibodies and aptamers

Polychlorinated biphenyls (PCBs) are persistent pollutants, which have expanded in foods and the environment. Detection of PCBs is considered essential due to recognized side-effects of PCBs on health and the public concerns in this regard. On the other hand, due to the trace levels of these organic chlorine compounds, reliable and sensitive assays must be developed. Recognition elements are essential parts of analytical detection assays and sensors of PCBs since these elements are involved in the selective identification of the analytes of interest. Understanding the fundamentals of the recognition elements of PCBs and the benefits of the sensor strategies result in the development of next-generation recognition devices. This review aimed to highlight the recent progress in the recognition elements as key parts of biosensors. We initially, focused on the developed antibody-based biosensors for the detection of PCBs, followed by discussing the aptamers as novel recognition elements. Furthermore, the recent advancement in the development of aptamer-based solid phase extractions has been evaluated. These findings could contribute to improving the design of commercial PCB-kits in the future.

One-pot synthesis of a CdS-reduced graphene oxide-carbon nitride composite for self-powered photoelectrochemical aptasensing of PCB72

Graphitic carbon nitride (C3N4) is a carbon-based metal-free semiconductor, which has been widely explored as a photoactive material. In this work, the CdS, reduced graphene oxide (rGO) and C3N4 (CdS-rGO-C3N4) composite was synthesized by a simple one-pot hydrothermal method and utilized to construct a photoelectrochemical (PEC) sensor. Compared with CdS, C3N4 and CdS-C3N4, the CdS-rGO-C3N4 composite exhibited enhanced photoelectrochemical (PEC) performance, due to the expanded absorption of C3N4 in the visible region by CdS and promoted the charge carrier separation of a photoelectrode by rGO. Based on a glassy carbon electrode (GCE) modified with CdS-rGO-C3N4 and a PCB72-binding aptamer (ap/CdS-rGO-C3N4/GCE), a PEC aptasensor for the detection of 2,3',5,5'-tetrachlorobiphenyl (PCB72) was developed. When H2O2 was added into the electrolyte, the PEC sensor exhibited an amplified response toward PCB72, and could be operated in a self-powered mode at a potential of 0 V. Under optimum conditions, the constructed PEC aptasensor exhibited a wide linear range of 10 to 1000 ng mL-1 for PCB72 detection, with a low detection limit (S/N = 3) of 1.0 ng mL-1. Moreover, this aptasensor exhibited high selectivity, good reproducibility and high stability. The applicability of the developed PEC strategy was demonstrated by determining PCB72 in environmental water.

CdTe QD-CeO2 Complex as a Strong Photoelectrochemical Signal Indicator for the Ultrasensitive microRNA Assay

The photoelectrochemical (PEC) signal can be enhanced by constructing sensitization structures containing photoactive materials and appropriate sensitizers. However, usually, the photoactive materials and sensitizers were separated in independent nanostructures, thereby producing long electron-transfer path and large energy loss, which could further result in limited photoelectric conversion efficiency and PEC signals. Herein, we designed a novel sensitization nanostructure simultaneously containing the photoactive material cerium dioxide (CeO₂) and its sensitizer CdTe quantum dots (QDs) as the strong PEC signal indicator (CdTe QD-CeO₂ complex), which prominently enhanced photoelectric conversion efficiency because of the shortened electron-transfer path and reduced energy loss. The proposed CdTe QD-CeO₂ complex was used to construct a PEC biosensor for achieving ultrasensitive determination of microRNA-141 (miRNA-141) coupling with target converting amplification and DNA supersandwich structure amplification. The designed PEC biosensor demonstrated a wide linear range from 0.5 fM to 5 nM with a detection limit of 0.17 fM for miRNA-141. Impressively, this work provided a new and strong PEC signal indicator for the construction of  PEC sensing platform and would extend the application of PEC sensors in bioanalysis and early disease diagnosis.

An ultrasensitive electrochemiluminescence biosensor for nuclear factor kappa B p50 based on the proximity hybridization-induced hybridization chain reaction

Nuclear factor kappa B p50 (NF-κB p50) induces various biological processes.