Electrochemical Aptasensor for Ultralow Fouling Cancer Cell Quantification in Complex Biological Media Based on Designed Branched Peptides

An antifouling electrochemical sensor based on a U-shaped four-in-one peptide and poly(3,4-ethylenedioxythiophene) for vancomycin detection in fresh goat milk

Nonspecific adsorption of biomolecules (notably, proteins) and bacteria from unsterilized food may occur on sensor surfaces, which is still a challenge for food safety sensing. To achieve sensitive detection of unsterilized raw-food materials, in this study, a U-shaped four-in-one peptide with the sequence Ac-FLKLLKKLL-DOPA3-PPPPEEKDQDKEKaa that exhibited anchoring, antifouling, antibacterial, and recognition properties was designed. The peptide-modified sensor surface effectively prevented bacterial adhesion and proliferation while resisting biomolecule adsorption (signal inhibition rate as low as 0.51 % in single-protein solutions). A highly conductive polymer layer of poly(3,4-ethylenedioxythiophene) was introduced to improve the electrochemical performance before U-shaped four-in-one peptide anchoring. The proposed sensor could accurately detect vancomycin, with a wide linear range and limit of detection of 0.05-10 μg mL-1 and 2.06 ng mL-1 (S/N = 3), respectively. Satisfactory recovery rates (101.3-105.3 %) were achieved using diluted fresh goat milk.

Optimizing Ammonia Detection with a Polyaniline-Magnesia Nano Composite

Polyaniline-magnesia (PANI/MgO) composites with a fibrous nanostructure were synthesized via in situ oxidative polymerization, enabling uniform MgO integration into the polyaniline matrix. These composites were characterized using FTIR spectroscopy to analyze intermolecular bonding, XRD to assess crystallographic structure and phase purity, and SEM to examine surface morphology and topological features. The resulting PANI/MgO nanofibers were utilized to develop ammonia (NH3) gas-sensing probes with evaluations conducted at room temperature. The study addresses the critical challenge of achieving high sensitivity and selectivity in ammonia detection at low concentrations, which is a problem that persists in many existing sensor technologies. The nanofibers demonstrated high selectivity and optimal sensitivity for ammonia detection, which was attributed to the synergistic effects between the polyaniline and MgO that enhance gas adsorption. Furthermore, the study revealed that the MgO content critically influences both the morphology and the sensing performance, with higher MgO concentrations improving sensor response. This work underscores the potential of PANI/MgO composites as efficient and selective ammonia sensors, highlighting the importance of MgO content in optimizing material properties for gas-sensing applications.

Highly selective detection of breast cancer cells mediated by multi-aptamer and dye-loaded mesoporous silica nanoparticles

Multi-aptamer recognition of breast cancer cells (MCF-7) is utilized to achieve high specificity. The method comprises two parts, aptamer-functionalized mesoporous silica nanoparticles (MSNs) loaded with dissimilar dyes (thymolphthalein or curcumin) as signal transducers and aptamer-modified magnetic beads (MBs) as capture agents, which worked together to detect MCF-7 cells sensitively and accurately. The results indicated that the aptasensor has a linear detection range of 100 to 4000 cells and a detection threshold of 10 cells/mL. The method had been successfully employed to detect breast cancer cells in real blood samples to distinguish between breast cancer patients and healthy individuals. In conclusion, the development of the multi-aptamer-based colorimetric sensor offered a novel method for the highly selective detection of MCF-7 cells, contributing to the accurate identification of breast cancer.

Boronate crosslinking-based ratiometric electrochemical assay of glycated albumin

As a product of nonenzymatic glycation, glycated albumin (GA) is a promising serum marker for the short-term glycemic monitoring in patients with diabetes. On the basis of the boronate crosslinking (BCL)-enabled direct labeling of ferrocene (Fc) tags to the nonenzymatically glycated (NEG) sites, we report herein a novel aptamer-based ratiometric electrochemical (apt-REC) platform for the point-of-care (POC) assay of GA. This apt-REC platform is based on the recognition of GA proteins by the methylene blue (MB)-modified aptamer receptors and the labeling of the Fc tags to the NEG sites via the BCL. Using MB as the reference tag and Fc as the quantification tag, the ratio of the oxidation currents (i.e., IFc/IMB) can serve as the yardstick for the ratiometric assay of GA. Due to the presence of tens of the NEG sites, each GA protein can be labeled with tens of quantification tags, permitting the amplified assay in a simple, time-saving, and low-cost manner. The ratiometric signal exhibited a good linear response over the range from 0.1 to 100 μg/mL, with a detection limit of 45.5 ng/mL. In addition to the superior reproducibility and robustness, this apt-REC platform is highly selective (capable of discriminating GA against human serum albumin (HSA)) and applicable to GA assay in serum samples. Due to its low cost, high reproducibility and robustness, simple operation, and high sensitivity and selectivity, this apt-REC platform holds great promise in the POC assay of GA for diabetes management.

Polyaromatic Hydrocarbon-Functionalized 2D MXene-Based 3D Porous Antifouling Nanocomposite with Long Shelf Life for High-Performance Electrochemical Immunosensor Applications

Affinity-based electrochemical (AEC) biosensors have gained more attention in the field of point-of-care management. However, AEC sensing is hampered by biofouling of the electrode surface and degradation of the antifouling material. Therefore, a breakthrough in antifouling nanomaterials is crucial for the fabrication of reliable AEC biosensors. Herein, for the first time, we propose 1-pyrenebutyric acid-functionalized MXene to develop an antifouling nanocomposite to resist biofouling in the immunosensors. The nanocomposite consisted of a 3D porous network of bovine serum albumin cross-linked with glutaraldehyde with functionalized MXene as conductive nanofillers, where the inherited oxidation resistance property of functionalized MXene improved the electrochemical lifetime of the nanocomposite. On the other hand, the size-extruded porous structure of the nanocomposite inhibited the biofouling activity on the electrode surface for up to 90 days in real samples. As a proof of concept, the antifouling nanocomposite was utilized to fabricate a multiplexed immunosensor for the detection of C-reactive protein (CRP) and ferritin biomarkers. The fabricated sensor showed good selectivity over time and an excellent limit of detection for CRP and ferritin of 6.2 and 4.2 pg/mL, respectively. This research successfully demonstrated that functionalized MXene-based antifouling nanocomposites have great potential to develop high-performance and low-cost immunosensors.

Peptide-based self-assembled monolayers (SAMs): what peptides can do for SAMs and vice versa

Self-assembled monolayers (SAMs) represent highly ordered molecular materials with versatile biochemical features and multidisciplinary applications. Research on SAMs has made much progress since the early begginings of Au substrates and alkanethiols, and numerous examples of peptide-displaying SAMs can be found in the literature. Peptides, presenting increasing structural complexity, stimuli-responsiveness, and biological relevance, represent versatile functional components in SAMs-based platforms. This review examines the major findings and progress made on the use of peptide building blocks displayed as part of SAMs with specific functions, such as selective cell adhesion, migration and differentiation, biomolecular binding, advanced biosensing, molecular electronics, antimicrobial, osteointegrative and antifouling surfaces, among others. Peptide selection and design, functionalisation strategies, as well as structural and functional characteristics from selected examples are discussed. Additionally, advanced fabrication methods for dynamic peptide spatiotemporal presentation are presented, as well as a number of characterisation techniques. All together, these features and approaches enable the preparation and use of increasingly complex peptide-based SAMs to mimic and study biological processes, and provide convergent platforms for high throughput screening discovery and validation of promising therapeutics and technologies.

A portable electrochemical DNA sensor for sensitive and tunable detection of piconewton-scale cellular forces

Cell-generated forces are a key player in cell biology, especially during cellular shape formation, migration, cancer development, and immune response. A new type of label-free smartphone-based electrochemical DNA sensor is developed here for cellular force measurement. When cells apply tension forces to the DNA sensors, the rapid rupture of DNA duplexes allows multiple redox reporters to reach the electrode and generate highly sensitive electrochemical signals. The sensitivity of these portable sensors can be further enhanced by incorporating a CRISPR-Cas12a system. Meanwhile, the threshold force values of these DNA-based sensors can be rationally tuned based on the force application geometries and also DNA intercalating agents. Overall, these highly sensitive, portable, cost-efficient, and easy-to-use electrochemical sensors can be powerful tools for detecting different cell-generated molecular forces.

Antifouling strategies for electrochemical sensing in complex biological media

Surface fouling poses a significant challenge that restricts the analytical performance of electrochemical sensors in both in vitro and in vivo applications. Biofouling resistance is paramount to guarantee the reliable operation of electrochemical sensors in complex biofluids (e.g., blood, serum, and urine). Seeking efficient strategies for surface fouling and establishing highly sensitive sensing platforms for applications in complex media have received increasing attention in the past. In this review, we provide a comprehensive overview of recent research efforts focused on antifouling electrochemical sensors. Initially, we present a detailed illustration of the concept about biofouling along with an exploration of four key antifouling mechanisms. Subsequently, we delve into the commonly employed antifouling strategies in the fabrication of electrochemical sensors. These encompass physical surface topography (micro/nanostructure coatings and filtration membranes) and chemical surface modifications (PEG and its derivatives, zwitterionic polymers, peptides, proteins, and various other antifouling materials). The progress in antifouling electrochemical sensors is proposed concerning the antifouling mechanisms as well as sensing capability assessments (e.g., sensitivity, stability, and practical application ability). Finally, we summarize the evolving trends in the field and highlight some key remaining limitations.

Protease detection in the biosensor era: A review

Proteases have been proposed as potential biomarkers for several pathological conditions including cancers, multiple sclerosis and cardiovascular diseases, due to their ability to break down the components of extracellular matrix and basement membrane. The development of protease biosensors opened up the possibility to investigate the proteolytic activity of dysregulated proteases with higher efficiency over the traditional detection assays due to their quick detection capability, high sensitivity and selectivity, simple instrumentation and cost-effective fabrication processes. In contrast to the recently published review papers that primarily focused on one specific class of proteases or one specific detection method, this review article presents different optical and electrochemical detection methods that can be used to design biosensors for all major protease families. The benefits and drawbacks of various transducer techniques integrated into protease biosensing platforms are analyzed and compared. The main focus is on activity-based biosensors that use peptides as biorecognition elements. The effects of nanomaterials on biosensor performance are also discussed. This review should help readers to select the biosensor that best fits their needs, and contribute to the further development of this research field. Protease biosensors may allow better comprehension of protease overexperession and potentially enable novel devices for point-of-care testing.

Application of Ag nanoparticles decorated on graphene nanosheets for electrochemical sensing of CEA as an important cancer biomarker

In this research, a novel biosensing platform is described based on graphene nano-sheets decorated with Ag nano-particles (GNSs@Ag NPs). The designed electrochemical aptasensor was employed to determine carcinoembryonic antigen (CEA), an important cancer biomarker. Inherently, aptasensing interfaces provide high sensitivity for CEA tumor marker because of the high specific surface area and excellent conductivity of the prepared GNSs@Ag NPs composite. The established assay demonstrated a wide linear range from 0.001 pg/mL to 10 pg/mL with a correlation coefficient of 0.9958 and low detection limit (DL) of 0.5 fg/mL based on S/N = 3 protocol. The derived biosensor illustrated acceptable selectivity towards common interfering species including HER2, VEGF, IgG, MUC1 and CFP10. In addition, the aptsensor showed good reproducibility and fast response time. The applicability of the suggested strategy in human serum samples was also examined and compared to the commercial enzyme-linked immunosorbent assay (ELISA). Based on the experimental data, it was found that the discussed sensing platform can be exerted in the monitoring of CEA in different cancers for early diagnosis.

An antifouling electrochemical biosensor based on chondroitin sulfate-functionalized polyaniline and DNA-peptide conjugates for cortisol determination in body fluids

An antifouling electrochemical biosensor was constructed based on chondroitin sulfate (CS)-functionalized polyaniline (CS/PANI) and DNA-peptide conjugates that is capable of assaying cortisol directly in human fluids. First, a CS-doped PANI nanocomposite (sensing substrate) was electrodeposited onto a bare glassy carbon electrode to promote electron transport, providing the sensing signal from high peak currents of PANI to improve the sensitivity of the biosensor. Dendritic DNA-peptide conjugates were assembled onto the CS/PANI by exploiting the highly specific and strong interactions between biotin and streptavidin, which amplified the sensing signals toward cortisol. The integration of the DNA-peptide conjugates into the CS/PANI nanocomposite ensured that the biosensor had a synergistic antifouling effect and was capable of detecting cortisol directly in body fluids (sweat, saliva, and tears). When assaying cortisol levels, the biosensor exhibited a linear range over the cortisol concentrations of 1 × 10-12-1 × 10-7 M and a low limit of detection (0.333 × 10-12 M). In the detection of cortisol in real samples, the relative standard deviation (RSD) of the biological samples ranged from 2.94 to 4.23%, and the recovery were calculated to be in the range 95.2-103.2%.

Achieving high hybridization density at DNA biosensor surfaces using branched spacer and click chemistry

The COVID-19 pandemic has highlighted the necessity to develop fast, highly sensitive and selective virus detection methods. Surface-based DNA-biosensors are interesting candidates for this purpose. Functionalization of solid substrates with DNA must be precisely controlled to achieve the required accuracy and sensitivity. In particular, achieving high hybridization density at the sensing surface is a prerequisite to reach a low limit of detection. We herein describe a strategy based on peptides as anchoring units to immobilize DNA probes at the surface of borosilicate slides. While the coating pathway involves copper-catalyzed click chemistry, a copper-free variation is also reported. The resulting biochips display a high hybridization density (2.9 pmol per cm2) with their targeted gene sequences.

Engineered Branching Peptide as Dual-Functional Antifouling and Recognition Probe: Toward a Dual-Photoelectrode Protein Biosensor with High Accuracy

The building of practical biosensors that have anti-interference abilities against biofouling of nonspecific proteins and biooxidation of reducing agents in actual biological matrixes remains a great challenge. Herein, a robust photoelectrochemical (PEC) biosensor capable of accurate detection in human serum was pioneered through the integration of a new engineered branching peptide (EBP) into a synergetic dual-photoelectrode system. The synergetic dual-photoelectrode system involved the tandem connection of a C3N4/TiO2 photoanode and a AuPt/PANI photocathode, while the EBP as a dual-functional antifouling and recognition probe featured an inverted Y-shaped configuration with one recognition backbone and two antifouling branches. Such an EBP enables a simple procedure for electrode modification and an enhanced antifouling nature compared to a regular linear peptide (LP), as theoretically supported by the results from molecular dynamics simulations. The as-developed PEC biosensor had a higher photocurrent response and a good antioxidation property inherited from the photoanode and photocathode, respectively. Targeting the model protein biomarker of cardiac troponin I (cTnI), this biosensor achieved good performances in terms of high sensitivity, specificity, and anti-interference.

Chemical antifouling strategies in sensors for food analysis: A review

Surface biofouling induced by the undesired nonspecific adsorption of foulants (e.g., coexisting proteins and cells) in food matrices is a major issue of sensors for food analysis, hindering their reliability and accuracy of sensing. This issue can be addressed by developing antifouling strategies to prevent or alleviate nonspecific binding. Chemical antifouling strategies involve the use of chemical modifiers (i.e., antifouling materials) to strongly hydrate the surface and reduce surface biofouling. Through appropriate immobilization approaches, antifouling materials can be tethered onto sensors to form antifouling surfaces with well-ordered structures, balanced surface charges, and appropriate surface density and thickness. A rational antifouling surface can reduce the matrix effect, simplify sample pretreatment, and improve analytical performance. This review summarizes recent developments in chemical antifouling strategies in sensing. Surface antifouling mechanisms and common antifouling materials are described, and factors that may influence the antifouling effects of antifouling surfaces and approaches incorporating antifouling materials onto sensing surfaces are highlighted. Moreover, the specific applications of antifouling sensors in food analysis are introduced. Finally, we provide an outlook on future developments in antifouling sensors for food analysis.

Conjugated Polymers for Aptasensing Applications

Rapid and specific assaying of molecules that report on a pathophysiological condition, environmental pollution, or drug concentration is pivotal for establishing efficient and accurate diagnostic systems. One of the main components required for the construction of these systems is the recognition element (receptor) that can identify target analytes. Oligonucleotide switching structures, or aptamers, have been widely studied as selective receptors that can precisely identify targets in different analyzed matrices with minimal interference from other components in an antibody-like recognition process. These aptasensors, especially when integrated into sensing platforms, enable a multitude of sensors that can outperform antibody-based sensors in terms of flexibility of the sensing strategy and ease of deployment to areas with limited resources. Research into compounds that efficiently enhance signal transduction and provide a suitable platform for conjugating aptamers has gained huge momentum over the past decade. The multifaceted nature of conjugated polymers (CPs), notably their versatile electrical and optical properties, endows them with a broad range of potential applications in optical, electrical, and electrochemical signal transduction. Despite the substantial body of research demonstrating the enhanced performance of sensing devices using doped or nanostructure-embedded CPs, few reviews are available that specifically describe the use of conjugated polymers in aptasensing. The purpose of this review is to bridge this gap and provide a comprehensive description of a variety of CPs, from a historical viewpoint, underpinning their specific characteristics and demonstrating the advances in biosensors associated with the use of these conjugated polymers.

A Wearable Electrochemical Sensor Based on Anti-Fouling and Self-Healing Polypeptide Complex Hydrogels for Sweat Monitoring

Although continuous monitoring of constituents in complex sweat is crucial for noninvasive physiological evaluation, biofouling on the sweat sensor surface and inadequate flexible self-healing materials restrict its applications. Herein, a fully self-healing and strong anti-biofouling polypeptide complex hydrogel (AuNPs/MoS2/Pep hydrogel) with excellent electrochemical performances was created. The anti-fouling electrochemical sweat sensor was fabricated based on the AuNPs/MoS2/Pep hydrogel to address these issues. It was found that the polypeptide hydrogel was designed to form a network structure and carried abundant hydrophilic groups, resulting in a AuNPs/MoS2/Pep hydrogel with superior anti-biofouling properties in sweat for 30 min and even long-term stability in undiluted human sweat. In addition, SEM, TEM, UV, XPS, and infrared spectrogram demonstrated that the binding force of π-π stacking force between MoS2 and naphthalene groups in the designed peptide endowed the polypeptide complex hydrogel with an excellent self-healing property. Furthermore, the polypeptide complex hydrogel preserved wearable device function of continuously monitoring uric acid (UA) and ascorbic acid (AA) in sweat in situ. This novel fabricated sweat sensor with high anti-biofouling ability, excellent self-healing property, and sensitive and selective analytical capability describes a new opportunity for health monitoring in situ.

Perspectives and trends in advanced optical and electrochemical biosensors based on engineered peptides

With the advancement of life medicine, in vitro diagnostics (IVD) technology has become an auxiliary tool for early diagnosis of diseases. However, biosensors for IVD now face some disadvantages such as poor targeting, significant antifouling properties, low density of recognized molecules, and poor stability. In recent years, peptides have been demonstrated to have various functions in unnatural biological systems, such as targeting properties, antifouling properties, and self-assembly properties, which indicates that peptides can be engineered. These properties of peptides, combined with their good biocompatibility, can be well applied to the design of biosensors to solve the problems mentioned above. This review provides an overview of the properties of engineered functional peptides and their applications in enhancing biosensor performance, mainly in the field of optics and electrochemistry.

PD-L1 exosomes electrochemical sensor based on coordination of AgNCs and Zr4+: Multivalent peptide enhancing target capture efficiency and antifouling performance

Programmed death ligand 1 (PD-L1) exosomes are important biomarkers of immune activation in the initial stages of treatment and can predict clinical responses to PD-1 blockade in various cancer patients. However, traditional PD-L1 exosome bioassays face challenges such as high interface fouling in complex detection environments, limited detection specificity, and poor clinical serum applicability. Inspired by the multi-branched structure of trees, a biomimetic tree-like multifunctional antifouling peptide (TMAP)-assisted electrochemical sensor was developed for high-sensitivity exosomes detection. Multivalent interaction of TMAP significantly enhances the binding affinity of PD-L1 exosomes, thanks to the designed branch antifouling sequence, TMAPs antifouling performance is further improved. The addition of Zr⁴⁺ forms coordination bonds with the exosome's lipid bilayer phosphate groups to achieve highly selective and stable binding without interference from protein activity. The specific coordination between AgNCs and Zr⁴⁺ contributes to a dramatic change in the electrochemical signals, and lowing detection limit. The designed electrochemical sensor exhibited excellent selectivity and a wide dynamic response within the PD-L1 exosome concentration range from 78 to 7.8 × 10⁷ particles/mL. Overall, the multivalent binding ability of TMAP and the signal amplification characteristics of AgNCs have a certain driving role in achieving clinical detection of exosomes.

Gold nanoparticles-decorated peptide hydrogel for antifouling electrochemical dopamine determination

A reliable and brief ultralow fouling electrochemical sensing system capable of monitoring targets in complex biological media was constructed and validated based on gold nanoparticles-peptide hydrogel-modified screen-printed electrode. The self-assembled zwitterionic peptide hydrogel was prepared by a newly designed peptide sequence of Phe-Phe-Cys-Cys-(Glu-Lys)₃ with the N-terminal modified with a fluorene methoxycarbonyl group. The thiol groups on cysteine of the designed peptide are able to self-assemble with AuNPs to form a three-dimensional nanonetwork structure, which showed satisfactory antifouling capability in complex biological media (human serum). The developed gold nanoparticles-peptide hydrogel-based electrochemical sensing platform displayed notably sensing properties for dopamine determination, with a wide linear range (from 0.2 nM to 1.9 μM), a low limit of detection (0.12 nM), and an excellent selectivity. This highly sensitive and ultralow fouling electrochemical sensor was fabricated via simple preparation with concise components that avoid the accumulation of layers with single functional material and complex activation processes. This ultralow fouling and highly sensitive strategy based on the gold nanoparticles-peptide hydrogel with a three-dimensional nanonetwork offers a solution to the current situation of various low-fouling sensing systems facing impaired sensitivity and provides a potential path for the practical application of electrochemical sensors.

Tetrahedral DNA Nanostructure-Engineered Paper-Based Sensor with an Enhanced Antifouling Ability for Photoelectrochemical Sensing

Herein, a newly designed two-in-one tetrahedral DNA (TDN) nanostructure with an antifouling surface and backbone-rigidified interfacial tracks was developed for highly sensitive and selective detection of miRNA-182-5p. The well-regulated TDN tracks were assembled onto the surface of the TiO₂/MIL-125-NH₂-functionalized paper electrode, which efficiently avoided the obstacle of DNA strand tangling and decreased the probability of suspension during the walking process, thus greatly promoting the moving efficiency of DNA walkers. More interestingly, the TDN-modified sensing interfaces demonstrated incomparable antifouling ability against protein samples and interfering miRNAs due to the strong hydrophilic capacity and special molecular conformations, which addressed the dilemma of low sensitivity from traditional antifouling coating strategies. As a proof of concept, the designed bifunctional tetrahedron-modified paper-based photoelectrochemical sensor was successfully used to quantify miRNA-182-5p with a low detection limit of 0.09 fM and high specificity and was validated for monitoring of miRNA-182-5p in real samples. This TDN-engineered biointerface could be used as a universal platform for tracking various targets by substituting the biorecognition events, providing great promise for bioanalysis and clinical diagnosis.

Electrochemical Aptasensing for Lifestyle and Chronic Disease Management

Over the past decade, researchers have investigated electrochemical sensing for the purpose of fabricating wearable point-of-use platforms. These wearable platforms have the ability to non-invasively track biomarkers that are clinically relevant and provide a comprehensive evaluation of the user's health. Due to many significant operational advantages, aptamer-based sensing is gaining traction.Aptamer-based sensors have properties like long-term stability, resistance to denaturation, and high sensitivity. Using electrochemical sensing with aptamer-based biorecognition is advantageous because it provides significant benefits like lower detection limits, a wider range of operations, and, most importantly, the ability to detect using a label-free approach. This paper provides an outlook into the current state of electrochemical aptasensing. This review looks into the significance of the detection of biomarkers like glucose, cortisol etc., for the purpose of lifestyle and chronic disease monitoring. Moreover, this review will also provide a comprehensive evaluation of the current challenges and prospects in this field.

d-Amino Acid-Based Antifouling Peptides for the Construction of Electrochemical Biosensors Capable of Assaying Proteins in Serum with Enhanced Stability

The susceptibility of peptides to proteolytic degradation in human serum significantly hindered the potential application of peptide-based antifouling biosensors for long-term assaying of clinical samples. Herein, a robust antifouling biosensor with enhanced stability was constructed based on peptides composed of d-amino acids (d-peptide) with prominent proteolytic resistance. The electrode was electropolymerized with poly(3,4-ehtylenedioxythiophene) and electrodeposited with Au nanoparticles (AuNPs), and the d-peptide was then immobilized onto the AuNPs, and a typical antibody specific for immunoglobulin M (IgM) was immobilized. Because of the effect of d-amino acids, the d-peptide-modified electrode surface showed prominent antifouling capability and high tolerance to enzymatic hydrolysis. Moreover, the d-peptide-modified electrode exhibited much stronger long-term stability, as well as antifouling ability in human serum than the electrode modified with normal peptides. The electrochemical biosensor exhibited a sensitive response to IgM linearly within the range of 100 pg mL^-1 to 1.0 μg mL^-1 and a very low detection limit down to 37 pg mL^-1, and it was able to detect IgM in human serum with good accuracy. This work provided a new strategy to develop robust peptide-based biosensors to resist the proteolytic degradation for practical application in complex clinical samples.

Platinum-Based Nanocomposite Pt@BSA as an Efficient Electrochemical Biosensing Interface for Rapid and Ultrasensitive Determination of Folate Receptor-Positive Tumor Cells

Developing a cytosensing strategy based on electrochemical approaches has attracted wide interest due to the low cost, rapid response, and simple instrumentation. In this work, an electrochemical cytosensor employing the Pt@BSA nanocomposite as the biosensing substrate along with the covalent cross-linking of targeting molecules folic acid (FA) was constructed for highly sensitive determination of folate receptor (FR)-positive tumor cells. The prepared Pt@BSA nanocomposite revealed excellent biocompatibility for cell adhesion and proliferation, which was confirmed by cell viability evaluation using thiazolyl blue tetrazolium bromide (MTT) colorimetric methods. Due to the satisfactory electrical conductivity originating from Pt@BSA and the high binding affinity of FA to FR on the cell surface, an ultrasensitive and specific cytosensing device was designed for rapid and quantitative determination of HeLa cells (a model system) by differential pulse voltammetry (DPV) tests. This proposed cytosensor resulted in a wide HeLa cell determination range of 2.8 × 10¹-2.8 × 10⁶ cells mL^-1 with a low DPV detection limit of 9 cells mL^-1. The developed cytosensing approach exhibited highly specific recognition of FR-positive tumor cells, excellent inter-assay reproducibility with a relative standard deviation (RSD) of 4.7%, acceptable intra-assay precision, and favorable storage stability, expanding the application of electrochemical measurement technology in the biomedical field of early detection and diagnosis of cancers.

Branched, dendritic, and hyperbranched polymers in liquid biopsy device design

The development of minimally invasive tests for cancer diagnosis and prognosis will aid in the research of new treatments and improve survival rates. Liquid biopsies seek to derive actionable information from tumor material found in routine blood samples. The relative scarcity of tumor material in this complex mixture makes isolating and detecting cancerous material such as proteins, circulating tumor DNA, exosomes, and whole circulating tumor cells a challenge for device engineers. This review describes the chemistry and applications of branched and hyperbranched to improve the performance of liquid biopsy devices. These polymers can improve the performance of a liquid biopsy through several mechanisms. For example, polymers designed to increase the affinity of capture enhance device sensitivity. On the other hand, polymers designed to increase binding avidity or repel nonspecific adsorption enhance device specificity. Branched and hyperbranched polymers can also be used to amplify the signal from small amounts of detected material. The further development of hyperbranched polymers in liquid biopsy applications will enhance device capabilities and help these critical technologies reach the oncology clinic where they are sorely needed. This article is categorized under: Diagnostic Tools > Biosensing Diagnostic Tools > Diagnostic Nanodevices.

Cancer Diagnostics and Early Detection Using Electrochemical Aptasensors

The detection of early-stage cancer offers patients the best chance of treatment and could help reduce cancer mortality rates. However, cancer cells or biomarkers are present in extremely small amounts in the early stages of cancer, requiring high-precision quantitative approaches with high sensitivity for accurate detection. With the advantages of simplicity, rapid response, reusability, and a low cost, aptamer-based electrochemical biosensors have received considerable attention as a promising approach for the clinical diagnosis of early-stage cancer. Various methods for developing highly sensitive aptasensors for the early detection of cancers in clinical samples are in progress. In this article, we discuss recent advances in the development of electrochemical aptasensors for the early detection of different cancer biomarkers and cells based on different detection strategies. Clinical applications of the aptasensors and future perspectives are also discussed.

Antifouling peptides combined with recognizing DNA probes for ultralow fouling electrochemical detection of cancer biomarkers in human bodily fluids

Herein, a universal strategy for the construction of highly sensitive and low fouling biosensors was proposed based on antifouling peptides conjugated with recognizing DNA probes. The peptide-DNA conjugate was formed through a reagent-free click reaction between a typical DNA aptamer modified with 5'-dibenzocyclooctyne (DBCO) and the designed antifouling peptide terminated with biotin and the azide group at its two ends. With the assistance of streptavidin (SA), the electrochemical biosensor was constructed via immobilization of the straight peptides and peptide-DNA conjugates in sequence onto the electrode surface modified with electrodeposited poly(3,4-ethylenedioxythiophene) (PEDOT) and gold nanoparticles (AuNPs). The prepared biosensor exhibited excellent antifouling performances in various human bodily fluids such as serum, sweat and urine, with a wide linear response range for CA125 from 0.01 U mL^-1 to 1000 U mL^-1, and a low limit of detection of 0.003 U mL^-1. Combining the advantages of the antifouling peptide and recognizing DNA probe, this sensing strategy was capable of assaying CA125 in undiluted human serum, and it also offered a highly promising way for the development of different antifouling biosensors through the conjugation of antifouling peptides with various DNA probes.

Recent advances in the highly sensitive determination of zearalenone residues in water and environmental resources with electrochemical biosensors

Zearalenone (ZEN), a significant class of mycotoxin which is considered as a xenoestrogen, permits, similar to natural estrogens, it's binding to the receptors of estrogen resulting in various reproductive diseases especially, hormonal misbalance. ZEN has toxic effects on human and animal health as a result of its teratogenicity, carcinogenicity, mutagenicity, nephrotoxicity, genotoxicity, and immunotoxicity. To ensure water and environmental resources safety, precise, rapid, sensitive, and reliable analytical and conventional methods can be progressed for the determination of toxins such as ZEN. Different selective nanomaterial-based compounds are used in conjunction with different analytical detection approaches to achieve this goal. The current review demonstrates the state-of-the-art advances of nanomaterial-based electrochemical sensing assays including various sensing, apta-sensing and, immunosensing studies to the highly sensitive determination of various ZEN families. At first, a concise study of the occurrence, structure, toxicity, legislations, and distribution of ZEN in monitoring has been performed. Then, different conventional and clinical techniques and procedures to sensitive and selective sensing techniques have been reviewed and the efficient comparison of them has been thoroughly discussed. This study has also summarized the salient features and the requirements for applying various sensing and biosensing platforms and diverse immobilization techniques in ZEN detection. Finally, we have defined the performance of several electrochemical sensors applying diverse recognition elements couples with nanomaterials fabricated using various recognition elements coupled with nanomaterials (metal NPs, metal oxide nanoparticles (NPs), graphene, and CNT) the issues limiting development, and the forthcoming tasks in successful construction with the applied nanomaterials.

The Bioanalytical and Biomedical Applications of Polymer Modified Substrates

Polymers with different structures and morphology have been extensively used to construct functionalized surfaces for a wide range of applications because the physicochemical properties of polymers can be finely adjusted by their molecular weights, polydispersity and configurations, as well as the chemical structures and natures of monomers. In particular, the specific functions of polymers can be easily achieved at post-synthesis by the attachment of different kinds of active molecules such as recognition ligand, peptides, aptamers and antibodies. In this review, the recent advances in the bioanalytical and biomedical applications of polymer modified substrates were summarized with subsections on functionalization using branched polymers, polymer brushes and polymer hydrogels. The review focuses on their applications as biosensors with excellent analytical performance and/or as nonfouling surfaces with efficient antibacterial activity. Finally, we discuss the perspectives and future directions of polymer modified substrates in the development of biodevices for the diagnosis, treatment and prevention of diseases.

Recent Advances and Biomedical Applications of Peptide-Integrated Conducting Polymers

Conducting polymers (CPs) are of great interests to researchers around the world in biomedical applications owing to their unique electrical and mechanical properties. Besides, they are easy to fabricate and have long-term stability. These features make CPs a powerful building block of modern biomaterials. Peptide functionalization has been a versatile tool for the development of CP-based biomaterials. With the aid of peptide modifications, the biocompatibility, target selectivity, and cellular interactions of CPs can be greatly improved. Reflecting these aspects, an increasing number of studies on peptide-integrated conducting polymers have been reported recently. In this review, various kinds of peptide immobilization strategies on CPs are introduced. Moreover, the aims of peptide modification are discussed in three aspects: enhancing the specific selectivity, avoiding nonspecific adhesion, and mimicking the environment of extracellular matrix. We highlighted recent studies in the applications of peptide-integrated CPs in electrochemical sensors, antifouling surfaces, and conductive biointerfaces. These studies have shown great potentials from the integration of peptide and CPs as a versatile platform for advanced biological and clinical applications in the near future.

Optical cytosensors for the detection of circulating tumour cells

Blood analysis is an established approach to monitor various diseases, ranging from heart defects and diabetes to cancer. Among various tumor markers in the blood, circulating tumor cells (CTCs) have received increasing attention due to the fact that they originate directly from the tumors. Capturing and detecting CTCs represents a promising approach in cancer diagnostics and clinical management of cancers. CTCs in blood progress to self-seeding a tumour or initiating a new lesion mass. Cytosensors are biosensors intended to identify CTCs in a blood sample of cancer patients and provide information about the cancer status. Herein, we firstly discuss different detection methods of state-of-the-art optical cytosensors, including colorimetry, fluorescence, surface plasmon resonance, photoelectrochemistry and electrochemiluminescence. Then we review the significant advances made in implementing biorecognition elements and nanomaterials for the detection of cancer cells. Despite great progress in optical cytosensors, and their integration with smartphones, they have still only been explored to prototype stages. Much more effort is needed to fulfil their potential in modern cancer diagnostics and in monitoring the state of disease for cancer patients.

Antifouling Electrochemical Biosensor Based on the Designed Functional Peptide and the Electrodeposited Conducting Polymer for CTC Analysis in Human Blood

Circulating tumor cells (CTCs) are considered reliable cancer biomarkers for the liquid biopsy of many types of tumors. The direct detection of CTCs in human blood with normal biosensors, however, remains challenging because of severe biofouling in blood that contains various proteins and a large number of cells. Herein, we report the construction of an antifouling electrochemical biosensor capable of assaying CTCs directly in blood, based on a designed multifunctional peptide and the electrodeposited conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT). The designed peptide possesses antifouling capability in complex biological media and specific recognition ability to capture breast cancer cells MCF-7. Meanwhile, electrodeposited PEDOT can promote electron transfer at the sensing interface, improve the signal-to-noise ratio for the detection, and thus enhance the sensitivity of the biosensor. The integration of the multifunctional peptide and conducting polymer PEDOT ensures that the developed biosensor is able to perform directly in blood samples without purification or separation. The antifouling electrochemical biosensor for the detection of MCF-7 cells exhibits a wide linear range over 4 orders, with a limit of detection (LOD) of 17 cells mL^-1. More interestingly, even when performing in 25% human blood, the biosensor still retains a linear response with an LOD of 22 cells mL^-1, without suffering significantly from biofouling in real blood. This work provides a promising strategy for the direct analysis of CTCs in human blood without a complicated pretreatment, and it may find practical application in the liquid biopsy of cancers.

A highly sensitive electrochemical cytosensor based on a triple signal amplification strategy using both nanozyme and DNAzyme

The development of a sensitive cytosensor is beneficial for the early diagnosis and treatment of cancer. Herein, highly sensitive cytosensing was achieved by applying triple signal amplification strategies with Fe₃O₄@Au nanozymes and DNAzyme hybrids as electrochemical nanoprobes and toluidine blue (Tb) as the electron transfer medium. The Fe₃O₄@Au nanocomposites not only acted as nanozymes with excellent catalytic performance towards H₂O₂ reduction but also served as promising scaffolds to carry massive electroactive substances and DNA probes. The dual-functional DNA probes were designed with the sequence of hemin/G-quadruplex to serve as the DNAzyme and the sequence of aptamer to recognize cancer cells. Furthermore, Tb was also conjugated to the surface of the Fe₃O₄@Au nanohybrids, working as the electron transport medium to magnify the electrochemical response. With the above design, the Fe₃O₄@Au nanozymes and hemin/G-quadruplex DNAzyme efficiently co-catalyzed the reduction of H₂O₂ to accelerate the electron transfer of Tb, which realized triple signal amplification and finally improved the performance of the electrochemical cytosensor. The proposed cytosensor achieved a sensitive detection of HepG2 cells with a low detection limit of 20 cells mL^-1, and could be potentially used as an effective analysis tool in early cancer diagnosis in the future.

MXene-based cytosensor for the detection of HER2-positive cancer cells using CoFe2O4@Ag magnetic nanohybrids conjugated to the HB5 aptamer

MXenes are a new class of conductive two-dimensional material which have received growing attention in biosensing for their significant surface area and unique surface chemistry. Here, gold electrodes were modified with MXene nanosheets of about 2 nm thickness and 1.5 μm lateral size for the electrochemical detection of tumor cells. An HB5 aptamer with high selectivity for HER-2 positive cells was immobilized on the MXene layers via electrostatic interactions. To minimize electrode biofouling with blood matrix, magnetic separation of HER-2 positive circulating tumor cells was carried out using CoFe₂O₄@Ag magnetic nanohybrids bonded to the HB5. The formation of sandwich-like structures between the magnetically captured cells and the functionalized MXene electrodes effectively shields the electron transfer of a redox probe, enabling quantitative cell detection using the change in current. This label-free MXene-based cytosensor platform yielded a wide linear range of 10²-10⁶ cells/mL, low detection limit of 47 cells/mL, and good sensitivity and selectivity in the detection of HER2-posetive cells in blood samples. The presented aptacytosensor demonstrates the great potential of using CoFe₂O₄@Ag magnetic nanohybrids and MXenes to monitor cancer progression via circulating tumor cells in blood at low cost.

MOF-assisted antifouling material: application in rapid determination of TB gene in whole-serum specimens

Biofouling is a nuisance in the practical applications of biosensors, which seriously affects the reliability and accuracy of detection. The utilization of antifouling interface materials is a promising option for mitigating biofouling. Only highly accumulated antifouling polymeric surfaces tend to offer "zero" nonspecific protein adsorption. Herein, superior antifouling coatings based on chondroitin sulfate (CS) were prepared by the NH₂-MIL-53 (Al) assisted strategy. This is a novel design to improve the antifouling property of material by taking advantage of the high specific surface area of the three-dimensional MOF to increase the accumulation degree of antifouling functional groups per unit area. And the related chemical technology is simple and easy to operate. As expected, this novel CS-loaded MOF demonstrated an excellent antifouling performance in various biological samples, even in 100% goat serum. Only 8.48% changes of differential pulse voltammetry (DPV) were found. Furthermore, this antifouling interface material is successfully applied for the specific detection of the tuberculosis (TB) gene in undiluted biofluids. This developed TB biosensor showed a high analytical performance with a wide linear range (1.00 × 10^-16 M to 1.00 × 10^-11 M) and a low detection limit, indicating that it may open new avenues for direct biosensing of disease markers for clinical samples.

Simple and Rapid Synthesis of Branched Peptides through Microwave-Assisted On-Bead Ligation

A rapid on-bead convergent method for preparing branched peptides was reported. Linear peptides were prepared on Dbz resin and ligated various branched cores, including lysine dendrons and other dendritic compounds. Alongside microwave irradiation, <1.5 equiv of peptides is sufficient to afford 50-65% yields of pure branched peptides without chromatographic purification. Remarkably, the desired compounds were prepared within hours.

Aptamer Embedded Arch-Cruciform DNA Assemblies on 2-D VS2 Scaffolds for Sensitive Detection of Breast Cancer Cells

Arch-cruciform DNA are self-assembled on AuNPs/VS₂ scaffold as a highly sensitive and selective electrochemical biosensor for michigan cancer foundation-7 (MCF-7) breast cancer cells. In the construction, arch DNA is formed using two single-strand DNA sequences embedded with the aptamer for MCF-7 cells. In the absence of MCF-7 cells, a cruciform DNA labeled with three terminal biotin is bound to the top of arch DNA, which further combines with streptavidin-labeled horseradish peroxidase (HRP) to catalyze the hydroquinone-H₂O₂ reaction on the electrode surface. The presence of MCF-7 cells can release the cruciform DNA and reduce the amount of immobilized HRP, thus effectively inhibiting enzyme-mediated electrocatalysis. The electrochemical response of the sensor is negatively correlated with the concentration of MCF-7 cells, with a linear range of 10~1 × 10⁵ cells/mL, and a limit of detection as low as 5 cells/mL (S/N = 3). Through two-dimensional materials and enzyme-based dual signal amplification, this biosensor may pave new ways for the highly sensitive detection of tumor cells in real samples.

The electrochemiluminescence coreactant accelerator of metal-organic frameworks grafted with N-(aminobutyl)-N-(ethylisoluminol) for the ultrasensitive detection of chloramphenicol

In this work, metal-organic frameworks (MOFs) are utilized as effective ECL coreactant accelerator to enhance the ECL responses of N-(aminobutyl)-N-(ethylisoluminol) (ABEI). Zn-based MOFs (MOF-Zn-1) were prepared by chelating Zn ions with melamine and thiophenedicarboxylic acid (TPDA), which observably accelerated the electrocatalytic oxidation of tripropylamine (TPA). Then, ABEI-MOF-Zn-1 as a high-performance ECL emitter was synthesized via an amide reaction between ABEI and mercaptopropionic acid (MPA) modified MOF-Zn-1. Strikingly, the ABEI-MOF-Zn-1 showed the 18-fold increase in the ECL signals relative to pure ABEI by using TPA as a coreactant. Moreover, ferrocene (Fc) as a quencher was first linked with capture DNA (cDNA), and then used to modify the ABEI-MOF-Zn-1, thereby constructing a label-free ECL biosensor. After the linkage between chloramphenicol (CAP) and aptamer DNA (aptDNA), the ECL response was definitely recovered by releasing L-DNA from double-stranded DNA (dsDNA, hybridization of aptDNA and L-DNA). The resultant sensor showed a wide linear range of 1.00 nM-0.10 mM (R² = 0.99) and a low limit of detection (LOD) down to 0.11 nM for detecting CAP. This work developed a novel pattern to design an efficient ECL enhanced emitter, coupled by expanding its potential applications in clinical diagnosis.

Electrochemical Sensors for Detection of Markers on Tumor Cells

In recent years, the increasing incidence and mortality of cancer have inspired the development of accurate and rapid early diagnosis methods in order to successfully cure cancer; however, conventional methods used for detecting tumor cells, including histopathological and immunological methods, often involve complex operation processes, high analytical costs, and high false positive rates, in addition to requiring experienced personnel. With the rapid emergence of sensing techniques, electrochemical cytosensors have attracted wide attention in the field of tumor cell detection because of their advantages, such as their high sensitivity, simple equipment, and low cost. These cytosensors are not only able to differentiate tumor cells from normal cells, but can also allow targeted protein detection of tumor cells. In this review, the research achievements of various electrochemical cytosensors for tumor cell detection reported in the past five years are reviewed, including the structures, detection ranges, and detection limits of the cytosensors. Certain trends and prospects related to the electrochemical cytosensors are also discussed.

The Role of Peptides in the Design of Electrochemical Biosensors for Clinical Diagnostics

Peptides represent a promising class of biorecognition elements that can be coupled to electrochemical transducers. The benefits lie mainly in their stability and selectivity toward a target analyte. Furthermore, they can be synthesized rather easily and modified with specific functional groups, thus making them suitable for the development of novel architectures for biosensing platforms, as well as alternative labelling tools. Peptides have also been proposed as antibiofouling agents. Indeed, biofouling caused by the accumulation of biomolecules on electrode surfaces is one of the major issues and challenges to be addressed in the practical application of electrochemical biosensors. In this review, we summarise trends from the last three years in the design and development of electrochemical biosensors using synthetic peptides. The different roles of peptides in the design of electrochemical biosensors are described. The main procedures of selection and synthesis are discussed. Selected applications in clinical diagnostics are also described.

Anti-Fouling Magnetic Beads Combined with Signal Amplification Strategies for Ultra-Sensitive and Selective Electrochemiluminescence Detection of MicroRNAs in Complex Biological Media

Herein, an electrochemiluminescence (ECL) microRNA biosensor based on anti-fouling magnetic beads (MBs) and two signal amplification strategies was developed. The newly designed anti-fouling dendritic peptide was wrapped on the surfaces of MBs to make them resistant to nonspecific adsorption of biomolecules in complex biological samples so as to realize accurate and selective target recognition. One of the amplification strategies was achieved through nucleic acid cycle amplification based on the DNAzyme on the surfaces of MBs. Then, the output DNA generated by the nucleic acid cycle amplification program stimulated the hybrid chain reaction (HCR) process on the modified electrode surface to generate the other amplification of the ECL response. Titanium dioxide nanoneedles (TiO₂ NNs), as a co-reaction accelerator of the Ru(bpy)₂(cpaphen)²⁺ and tripropylamine (TPrA) system, were wrapped with the electrodeposited polyaniline (PANI) on the electrode surface to enhance the ECL intensity of Ru(bpy)₂(cpaphen)²⁺. The conducting polymer PANI can not only immobilize the TiO₂ NNs but also improve the conductivity of the modified electrodes. The biosensor exhibited ultra-high sensitivity and excellent selectivity toward the detection of miRNA 21, with a detection limit of 0.13 fM. More importantly, with the anti-fouling MBs as a unique separation tool, this ECL biosensor was capable of assaying targets in complex biological media such as serum and cell lysate.

An electrochemical biosensor for alpha-fetoprotein detection in human serum based on peptides containing isomer D-Amino acids with enhanced stability and antifouling property

The development of antifouling biosensors capable of detecting biomarkers at low concentrations in complex bio-fluids with many interference components is of great importance in the diagnosis and treatment of diseases. Certain zwitterionic peptides composed of natural L-amino acids have been used for the construction of low fouling biosensors and demonstrated excellent antifouling performances, but they are prone to enzymatic degradation in biological media, such as serum that contains a variety of enzymes. In this work, a novel antifouling peptide with the sequence of cppPPEKEKEkek was designed, and three unnatural D-amino acids were set at both ends of the peptide to enhance its tolerance to enzymatic degradation. An electrochemical biosensor was constructed by coupling the antifouling peptide with a conducting polymer polyaniline (PANI) to achieve accurate detection of alpha-fetoprotein (AFP) in clinical samples. Owing to the presence of the designed peptide with partial D-amino acids (pD-peptide), the biosensing interface showed significantly high antifouling performance and enhanced stability in human serum. Meanwhile, the pD-peptide based biosensor exhibited high sensitivity toward the target AFP, with the linear range from 0.1 fg mL^-1 to 1.0 ng mL^-1 and the limit of detection of 0.03 fg mL^-1 (S/N = 3). This strategy of enhancing the stability (tolerance to enzymolysis) of antifouling peptides in biological samples provided an effective way to develop antifouling biosensors for practical applications.

Free-standing electrochemical biosensor for carcinoembryonic antigen detection based on highly stable and flexible conducting polypyrrole nanocomposite

A flexible free-standing electrochemical biosensor to detect carcinoembryonic antigen (CEA) is described based on a conducting polypyrrole (PPy) nanocomposite film electrode. The conducting PPy composite was constructed by the sandwiched structure formed by PPy doped with pentaerythritol ethoxylate (PEE) and 2-naphthalene sulfonate (2-NS-PPy) separately via electropolymerization. Gold nanoparticles (AuNPs) were fixed on the PPy composite film by electrodeposition and then connected to CEA aptamer through self-assembly to construct a free-standing electrochemical biosensor breaking away from additional soft substrates and current collector. This PPy composite film-based electrochemical biosensor exhibits satisfying sensing performance for CEA detection, with a linear range from 10^-10 g/mL to 10^-6 g/mL and a detection limit of 0.033 ng/mL, good specificity and long-term sensing stability (96.8% of the original signal after 15 days). The biosensor also presents acceptable reproducibility with 1.7% relative standard deviation. Moreover, this electrochemical biosensor owns the deformation stability that could bear various deformations (twisting, folding, and knotting) without affecting device's sensing performance. It can even maintain 99.4% of the original signal under 25% strain deformation. Due to the superior sensing performance, high stability (mechanical deformation and long-term storage), and flexibility, this free-standing electrochemical biosensor proves huge potential in application of flexible and wearable electronics.