AuPt/MOF-Graphene: A Synergistic Catalyst with Surprisingly High Peroxidase-Like Activity and Its Application for H2O2 Detection

Preparation of CoFe@C composite modified electrode for neohesperidin dihydrochalcone sensing and its application in Chinese medicine

CoFe@C was first prepared by calcining the precursor of CoFe-metal-organic framework-74 (CoFe-MOF-74), then an electrochemical sensor for the determination of neohesperidin dihydrochalcone (NHDC) was constructed, which was stemmed from the novel CoFe@C/Nafion composite film modified glassy carbon electrode (GCE). The CoFe@C/Nafion composite was verified by field-emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). Electrochemical impedance spectroscopy (EIS) was used to evaluate its electrical properties as a modified material for an electrochemical sensor. Compared with CoFe-MOF-74 precursor modified electrode, CoFe@C/Nafion electrode exhibited a great synergic catalytic effect and extremely increased the oxidation peak signal of NHDC. The effects of various experimental conditions on the oxidation of NHDC were investigated and the calibration plot was tested. The results bespoken that CoFe@C/Nafion GCE has good reproducibility and anti-interference under the optimal experimental conditions. In addition, the differential pulse current response of NHDC was linear with its concentration within the range 0.08 ~ 20 µmol/L, and the linear regression coefficient was 0.9957. The detection limit was as low as 14.2 nmol/L (S/N = 3). In order to further verify the feasibility of the method, it was successfully used to determine the content of NHDC in Chinese medicine, with a satisfactory result, good in accordance with that of high performance liquid chromatography (HPLC).

Quantitative Factors Introduced in the Feasibility Analysis of Reactive Oxygen Species (ROS)-Sensitive Triggers

Reactive oxygen species (ROS) are critical for cellular signaling. Various pathophysiological conditions are also associated with elevated levels of ROS. Hence, ROS-sensitive triggers have been extensively used for selective payload delivery. Such applications are predicated on two key functions: (1) a sufficient magnitude of concentration difference for the interested ROS between normal tissue/cells and intended sites and (2) appropriate reaction kinetics to ensure a sufficient level of selectivity for payload release. Further, ROS refers to a group of species with varying reactivity, which should not be viewed as a uniform group. In this review, we critically analyze data on the concentrations of different ROS species under various pathophysiological conditions and examine how reaction kinetics affect the success of ROS-sensitive linker chemistry. Further, we discuss different ROS linker chemistry in the context of their applications in drug delivery and imaging. This review brings new insights into research in ROS-triggered delivery, highlights factors to consider in maximizing the chance for success and discusses pitfalls to avoid.

Tunable Structured 2D Nanobiocatalysts: Synthesis, Catalytic Properties and New Horizons in Biomedical Applications

2D materials have offered essential contributions to boosting biocatalytic efficiency in diverse biomedical applications due to the intrinsic enzyme-mimetic activity and massive specific surface area for loading metal catalytic centers. Since the difficulty of high-quality synthesis, the varied structure, and the tough choice of efficient surface loading sites with catalytic properties, the artificial building of 2D nanobiocatalysts still faces great challenges. Here, in this review, a timely and comprehensive summarization of the latest progress and future trends in the design and biotherapeutic applications of 2D nanobiocatalysts is provided, which is essential for their development. First, an overview of the synthesis-structure-fundamentals and structure-property relationships of 2D nanobiocatalysts, both metal-free and metal-based is provided. After that, the effective design of the active sites of nanobiocatalysts is discussed. Then, the progress of their applied research in recent years, including biomedical analysis, biomedical therapeutics, pharmacokinetics, and toxicology is systematically highlighted. Finally, future research directions of 2D nanobiocatalysts are prospected. Overall, this review to provide cutting-edge and multidisciplinary guidance for accelerating future developments and biomedical applications of 2D nanobiocatalysts is expected.

Recent Progress and Prospect of Metal-Organic Framework-Based Nanozymes in Biomedical Application

A nanozyme is a nanoscale material having enzyme-like properties. It exhibits several superior properties, including low preparation cost, robust catalytic activity, and long-term storage at ambient temperatures. Moreover, high stability enables repetitive use in multiple catalytic reactions. Hence, it is considered a potential replacement for natural enzymes. Enormous research interest in nanozymes in the past two decades has made it imperative to look for better enzyme-mimicking materials for biomedical applications. Given this, research on metal-organic frameworks (MOFs) as a potential nanozyme material has gained momentum. MOFs are advanced hybrid materials made of inorganic metal ions and organic ligands. Their distinct composition, adaptable pore size, structural diversity, and ease in the tunability of physicochemical properties enable MOFs to mimic enzyme-like activities and act as promising nanozyme candidates. This review aims to discuss recent advances in the development of MOF-based nanozymes (MOF-NZs) and highlight their applications in the field of biomedicine. Firstly, different enzyme-mimetic activities exhibited by MOFs are discussed, and insights are given into various strategies to achieve them. Modification and functionalization strategies are deliberated to obtain MOF-NZs with enhanced catalytic activity. Subsequently, applications of MOF-NZs in the biosensing and therapeutics domain are discussed. Finally, the review is concluded by giving insights into the challenges encountered with MOF-NZs and possible directions to overcome them in the future. With this review, we aim to encourage consolidated efforts across enzyme engineering, nanotechnology, materials science, and biomedicine disciplines to inspire exciting innovations in this emerging yet promising field.

Fenton-like reaction triggered chemical redox-cycling signal amplification for ultrasensitive fluorometric detection of H2O2 and glucose

An ultrasensitive fluorescent biosensor is reported for glucose detection based on a Fenton-like reaction triggered chemical redox-cycling signal amplification strategy. In this amplified strategy, Cu2+ oxidizes chemically o-phenylenediamine (OPD) to generate photosensitive 2,3-diaminophenazine (DAP) and Cu+/Cu0. On the one hand, the generated Cu0 catalyzes the oxidation of OPD. On the other hand, H2O2 reacts with Cu+ to produce hydroxyl radicals (˙OH) and Cu2+ through a Cu+-mediated Fenton-like reaction. The generated ˙OH and recycled Cu2+ ions take turns oxidizing OPD to produce more photoactive DAP, triggering a self-sustaining chemical redox-cycling reaction and a remarkable fluorescent enhancement. It is worth mentioning that the cascade reaction did not stop until OPD molecules were completely consumed. Benefiting from H2O2-triggered chemical redox-cycling signal amplification, the strategy was exploited for the development of an ultrasensitive fluorescent biosensor for glucose determination. Glucose content monitoring was realized with a linear range from 1 nM to 1 μM and a limit of detection of 0.3 nM. This study validates the practicability of the chemical redox-cycling signal amplification on the fluorescent bioanalysis of glucose in human serum samples. It is expected that the method offers new opportunities to develop ultrasensitive fluorescent analysis strategy.

Hydrangea-like AuPtRu/ZnO-rGO Nanocomposites with Enhanced Peroxidase Mimiking Activity for Senitive Colorimetric Determination of H2O2

In this study, a facile and cost-effective hydrothermal synthesis method was used to synthesize zinc oxide nanoflowers modified by reduced graphene oxide, and subsequently, trimetallic AuPtRu nanoparticles(AuPtRuNPs) were supported via the reduction method for high-sensitivity colorimetric detection of H2O2 in weakly acidic solutions. Compared to monometallic and bimetallic nanoparticles, trimetallic nanoparticles exhibit significant synergistic effects and enhanced catalytic activity. After providing a three-dimensional structure with multiple pores by zinc oxide and enhancing electron transfer ability by reduced graphene, the trimetallic nanocomposites (AuPtRu/ZnO-rGO) exhibited excellent peroxidase-mimicking activity, which can effectively catalyze 3,3',5,5'-tetramethylbenzidine (TMB) to produce a blue oxidation product (oxTMB) in the presence of H2O2. Compared to horseradish peroxidase (HRP), AuPtRu/ZnO-rGO demonstrated significantly enhanced catalytic velocity (Vmax = 6.16 × 10-8 M/s) and affinity (Km = 0.02) for H2O2. The study of the catalytic mechanism showed that trimetallic Au, Pt, and Ru could effectively catalyze H2O2 to produce hydroxyl radicals (•OH) to accelerate the oxidation of TMB and enhance the peroxidase-mimicking activity of the AuPtRu/ZnO-rGO nanocomposites. The results showed that the as-synthesized hydrangea-like AuPtRu/ZnO-rGO nanocomposites showed enhanced peroxidase-mimicking activity. It could be used for the colorimetric detection of H2O2 in the range 5-1000 μM with a LOD of 3.0 μM (S/N = 3), and the recoveries are 93.0-101.7%. In addition, the AuPtRu/ZnO-rGO nanocomposites have good applicability for sensitive colorimetric determination of H2O2 in milk, and it has broad application prospects as a multifunctional sensing platform in the food processing industry.

Biomimetic and bioorthogonal nanozymes for biomedical applications

Nanozymes mimic the function of enzymes, which drive essential intracellular chemical reactions that govern biological processes. They efficiently generate or degrade specific biomolecules that can initiate or inhibit biological processes, regulating cellular behaviors. Two approaches for utilizing nanozymes in intracellular chemistry have been reported. Biomimetic catalysis replicates the identical reactions of natural enzymes, and bioorthogonal catalysis enables chemistries inaccessible in cells. Various nanozymes based on nanomaterials and catalytic metals are employed to attain intended specific catalysis in cells either to mimic the enzymatic mechanism and kinetics or expand inaccessible chemistries. Each nanozyme approach has its own intrinsic advantages and limitations, making them complementary for diverse and specific applications. This review summarizes the strategies for intracellular catalysis and applications of biomimetic and bioorthogonal nanozymes, including a discussion of their limitations and future research directions.

Mn3O4 nanoparticles decorated porous reduced graphene oxide with excellent oxidase-like activity for fast colorimetric detection of ascorbic acid

Mn₃O₄ nanoparticles composed of porous reduced graphene oxide nanosheets (Mn₃O₄@p-rGO) with enhanced oxidase-like activity were successfully fabricated through an in-situ approach for fast colorimetric detection of ascorbic acid (AA). The residual Mn²⁺ in the GO suspension of Hummers method was directly reused as the manganese source, improving the atom utilization efficiency. Benefiting from the uniform distribution of Mn₃O₄ nanoparticles on the surface of p-rGO nanosheets, the nanocomposite exhibited larger surface area, more active sites, and accelerated electron transfer efficiency, which enhanced the oxidase-like activity. Mn₃O₄@p-rGO nanocomposite efficiently activate dissolved O₂ to generate singlet oxygen (¹O₂), leading to high oxidation capacity toward the substrate 3,3',5,5'-tetramethylbenzidine (TMB) without the extra addition of H₂O₂. Furthermore, the prominent absorption peak of the blue ox-TMB at 652 nm gradually decreased in the presence of AA, and a facile and fast colorimetric sensor was constructed with a good linear relationship (0.5-80 μM) and low LOD (0.278 μM) toward AA. Owing to the simplicity and excellent stability of the sensing platform, its practical application for AA detection in juices has shown good feasibility and reliability compared with HPLC and the 2, 4-dinitrophenylhydrazine colorimetric method. The oxidase-like Mn₃O₄@p-rGO provides a versatile platform for applications in food testing and disease diagnosis.

A label-free colorimetric 3D paper-based device for ochratoxin A detection using G-quadruplex/hemin DNAzyme with a smartphone readout

The colorimetric sensor usually depends on enzyme-mediated signal amplification to achieve trace analysis of ochratoxin A (OTA) residues in food samples. However, the enzyme labeling and manual addition of reagents steps increased assay time and operation complexity, restricting their application in point-of-care testing (POCT). Herein, we report a label-free colorimetric device integrating a 3D paper-based analytical device and a smartphone as handheld readout for rapid and sensitive detection of OTA. Using vertical-flow design, the paper-based analytical device enables the specific recognition of target and self-assembly of G-quadruplex (G4)/hemin DNAzyme to be performed, then employs DNAzyme for transducing the OTA binding event signal into a colorimetric signal. The design of independent functional units, including biorecognition unit, self-assembly unit and colorimetric units, which can address crowding and disorder of biosensing interfaces and improve the recognition efficiency of aptamer (apta). In addition, we eliminated signal losses and nonuniform coloring by introducing carboxymethyl chitosan (CMCS) to obtain perfectly focused signals on colorimetric unit. On the basis of parameter optimization, the device exhibited a detection range of 0.1-500 ng/mL and a detection limit of 41.9 pg/mL for OTA. Importantly, good results were obtained in spiked real samples, indicating applicability and reliability of developed device.

Catalytic Modification of Porous Two-Dimensional Ni-MOFs on Portable Electrochemical Paper-Based Sensors for Glucose and Hydrogen Peroxide Detection

Rapid and accurate detection of changes in glucose (Glu) and hydrogen peroxide (H₂O₂) concentrations is essential for the predictive diagnosis of diseases. Electrochemical biosensors exhibiting high sensitivity, reliable selectivity, and rapid response provide an advantageous and promising solution. A porous two-dimensional conductive metal-organic framework (cMOF), Ni-HHTP (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene), was prepared by using a one-pot method. Subsequently, it was employed to construct enzyme-free paper-based electrochemical sensors by applying mass-producing screen-printing and inkjet-printing techniques. These sensors effectively determined Glu and H₂O₂ concentrations, achieving low limits of detection of 1.30 μM and 2.13 μM, and high sensitivities of 5573.21 μA μM^-1 cm^-2 and 179.85 μA μM^-1 cm^-2, respectively. More importantly, the Ni-HHTP-based electrochemical sensors showed an ability to analyze real biological samples by successfully distinguishing human serum from artificial sweat samples. This work provides a new perspective for the use of cMOFs in the field of enzyme-free electrochemical sensing, highlighting their potential for future applications in the design and development of new multifunctional and high-performance flexible electronic sensors.

Colorimetric method transforms into highly sensitive homogeneous voltammetric sensing strategy for mercury ion based on mercury-stimulated Ti3C2Tx MXene nanoribbons@gold nanozyme activity

Nanozymes were emerged as the next generation of enzyme-mimics which exhibit great applications in various fields, but there is rarely report in the electrochemical detection of heavy metal ions. In this work, Ti₃C₂T_x MXene nanoribbons@gold (Ti₃C₂T_x MNR@Au) nanohybrid was prepared firstly via a simple self-reduction process and its nanozyme activity was studied. The results showed the peroxidase-like activity of bare Ti₃C₂T_x MNR@Au is extremely weak, while in the presence of Hg²⁺, the related nanozyme activity is stimulated and improved remarkably, which can easily catalyze oxidation of several colorless substrates (e.g., o-phenylenediamine) to form colored products. Interestingly, the product of o-phenylenediamine exhibits a strong reduction current which is considerably sensitive to the Hg²⁺ concentration. Based on this phenomenon, an innovative and highly sensitive homogeneous voltammetric (HVC) sensing strategy was then proposed to detect Hg²⁺ via transforming the colorimetric method into electrochemistry since it can exhibit several unique advantages (e.g., rapid responsiveness, high sensitivity and quantificational). Compared to the conventional electrochemical sensing methods for Hg²⁺, the designed HVC strategy can avoid the modification processes of electrode coupled with enhanced sensing performances. Therefore, we expect the as-proposed nanozyme-based HVC sensing strategy provides a new development direction for detecting Hg²⁺ and other heavy metals.

Conductive and self-healing hydrogel for flexible electrochemiluminescence sensor

A flexible electrochemiluminescence (ECL) hydrogel sensor exhibiting good self-healing was constructed. A transparent self-healing oxidized sodium alginate/hydrazide polyethylene glycol (OSA/PEG-DH) hydrogel was prepared by crosslinking dynamic covalent acylhydrazone bond. The introduction of 4-amino-DL-phenylalanine, a catalyst with good biocompatibility, allows rapid gelation and self-healing of hydrogel under mild conditions. Using the hydrogel as the sensing substrate, the ionic liquid (IL) 2-hydroxy-N,N,N-trimethylethanaminium chloride and the luminescent reagent N-(aminobutyl)-N-(ethylisoluminol) (ABEI) were simultaneously immobilized in the OSA/PEG-DH hydrogel to obtain the ABEI/IL/OSA/PEG-DH hydrogel. The ABEI/IL/OSA/PEG-DH hydrogel can be directly used as a semi-solid electrolyte for constructing a flexible ECL hydrogel sensor for the detection of H₂O₂, which acted as a coreactant of ABEI. The prepared flexible ECL sensor showed good self-healing performance, can restore ECL signal intensity within 20 min after physical damage, and showed high accuracy in the analysis of complex serum samples. This research shed new light on the development of flexible ECL sensor for bioanalytical applications.

Enlightening the bimetallic effect of Au@Pd nanoparticles on Ni oxide nanostructures with enhanced catalytic activity

Bimetallic decoration of semiconductor electrodes typically improves catalytic and sensing performances because of a well-claimed synergistic effect. A microscopic and quantitative investigation of such an effect on energy bands of semiconductor can be really useful for further exploitation. Au, Pd and Au@Pd (core@shell) nanoparticles (10-20 nm in size) were synthesized through chemical reduction method and characterized with scanning and transmission microscopy, Rutherford backscattering spectrometry, cyclic voltammetry electrochemical impedance spectroscopy and Mott-Schottky analysis. The nanoparticles have been used to decorate Ni-based nanostructured electrodes with the aim to quantitatively investigate the effect of decoration with mono or bimetallic nanoparticles. Decorated electrodes show higher redox currents than bare ones and a shift in redox peaks (up to 0.3 V), which can be ascribed to a more efficient electron transport and improved catalytic properties. These effects were satisfactorily modeled (COMSOL) employing a nano Schottky junction at the nanoparticle-semiconductor interface, pointing out large energy band bending (up to 0.4 eV), space charge region and local electric field (up to [Formula: see text]) in bimetallic decoration. Sensing test of glucose and H₂O₂ by decorated Ni oxide electrodes were performed to consolidate our model. The presence of bimetallic nanoparticles enhances enormously the electrochemical performances of the material in terms of sensitivity, catalytic activity, and electrical transport. The modification of energy band diagram in semiconductor is analyzed and discussed also in terms of electron transfer during redox reactions.

Aptamer Trimode Biosensor for Trace Glyphosate Based on FeMOF Catalytic Oxidation of Tetramethylbenzidine

The stable and highly catalytic Fe metal-organic framework (FeMOF) nanosol was prepared and characterized by electron microscopy, and energy and molecular spectral analysis. It was found that FeMOF strongly catalyzed the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H₂O₂ to produce TMBox, which had a fluorescence (FL) peak at 410 nm. When silver nanoparticles were added, it exhibited strong resonance Rayleigh scattering (RRS) activity and surface-enhanced Raman scattering (SERS) effect. This new FeMOF nanocatalytic trimode indicator reaction was combined with the glyphosate aptamer reaction to establish a new SERS/RRS/FL trimode biosensor for glyphosate. The sensor can be used for the analysis of environmental wastewater, and a new method for detecting glyphosate content in wastewater is proposed. The linear range of the sensor is 0.1-14 nmol/L, the detection limit is 0.05 nmol/L, the recovery is 92.1-97.5%, and the relative standard deviation is 3.6-8.7%.

Emerging single-atom iron catalysts for advanced catalytic systems

Due to the elusive structure-function relationship, traditional nanocatalysts always yield limited catalytic activity and selectivity, making them practically difficult to replace natural enzymes in wide industrial and biomedical applications. Accordingly, single-atom catalysts (SACs), defined as catalysts containing atomically dispersed active sites on a support material, strikingly show the highest atomic utilization and drastically boosted catalytic performances to functionally mimic or even outperform natural enzymes. The molecular characteristics of SACs (e.g., unique metal-support interactions and precisely located metal sites), especially single-atom iron catalysts (Fe-SACs) that have a similar catalytic structure to the catalytically active center of metalloprotease, enable the accurate identification of active centers in catalytic reactions, which afford ample opportunity for unraveling the structure-function relationship of Fe-SACs. In this review, we present an overview of the recent advances of support materials for anchoring an atomic dispersion of Fe. Subsequently, we highlight the structural designability of support materials as two sides of the same coin. Moreover, the applications described herein illustrate the utility of Fe-SACs in a broad scope of industrially and biologically important reactions. Finally, we present an outlook of the major challenges and opportunities remaining for the successful combination of single Fe atoms and catalysts.

Recent Advances in Construction and Application of Metal-Nanozymes in Pharmaceutical Analysis

Nanozymes, made of emerging nanomaterials, have similar activity to natural enzyme and exhibit promising applications in in the fields of environment, biology and medicine, and food safety science. In recent years, with the deep finding and research to nanozymes by researchers, its application in field of pharmaceutical analysis has emerged gradually, possessing great significance in drug safety evaluation and quality control. This review summarizes the construction of metal nanozymes, strategies to improve their performance and their application in pharmaceutical detection and analysis, especially in detection of target analytes consisting of small molecule medicine macromolecule, toxic and others, which proposes theoretical foundation for development of nanozymes in this field. At the same time, it also provides opportunities and challenges for the construction and application of new nanozymes.

Electrochemical Sensors for the Detection of Reactive Oxygen Species in Biological Systems: A Critical Review

Reactive oxygen species (ROS) involving superoxide anion, hydrogen peroxide and hydroxyl radical play important role in human health. ROS are known to be the markers of oxidative stress associated with different pathologies including neurodegenerative and cardiovascular diseases, as well as cancer. Accordingly, ROS level detection in biological systems is an essential problem for biomedical and analytical research. Electrochemical methods seem to have promising prospects in ROS determination due to their high sensitivity, rapidity, and simple equipment. This review demonstrates application of modern electrochemical sensors for ROS detection in biological objects (e.g., cell lines and body fluids) over a decade between 2011 and 2021. Particular attention is paid to sensors materials and various types of modifiers for ROS selective detection. Moreover, the sensors comparative characteristics, their main advantages, disadvantages and their possibilities and limitations are discussed.

Metal–Organic Frameworks for Electrocatalytic Sensing of Hydrogen Peroxide

The electrochemical detection of hydrogen peroxide (H₂O₂) has become more and more important in industrial production, daily life, biological process, green energy chemistry, and other fields (especially for the detection of low concentration of H₂O_2). Metal organic frameworks (MOFs) are promising candidates to replace the established H₂O₂ sensors based on precious metals or enzymes. This review summarizes recent advances in MOF-based H₂O₂ electrochemical sensors, including conductive MOFs, MOFs with chemical modifications, MOFs-composites, and MOF derivatives. Finally, the challenges and prospects for the optimization and design of H₂O₂ electrochemical sensors with ultra-low detection limit and long-life are presented.

Operando optical fiber monitoring of nanoscale and fast temperature changes during photo-electrocatalytic reactions

In situ and continuous monitoring of thermal effects is essential for understanding photo-induced catalytic processes at catalyst's surfaces. However, existing techniques are largely unable to capture the rapidly changing temperatures occurring in sub-μm layers at liquid-solid interfaces exposed to light. To address this, a sensing system based on a gold-coated conventional single-mode optical fiber with a tilted fiber Bragg grating inscribed in the fiber core is proposed and demonstrated. The spectral transmission from these devices is made up of a dense comb of narrowband resonances that can differentiate between localized temperatures rapid changes at the catalyst's surface and those of the environment. By using the gold coating of the fiber as an electrode in an electrochemical reactor and exposing it to light, thermal effects in photo-induced catalysis at the interface can be decoded with a temperature resolution of 0.1 °C and a temporal resolution of 0.1 sec, without perturbing the catalytic operation that is measured simultaneously. As a demonstration, stable and reproducible correlations between the light-to-heat conversion and catalytic activities over time were measured for two different catalysis processes (linear and nonlinear). These kinds of sensing applications are ideally suited to the fundamental qualities of optical fiber sensors, such as their compact size, flexible shape, and remote measurement capability, thereby opening the way for various thermal monitoring in hard-to-reach spaces and rapid catalytic reaction processes.

Tailored construction of one-dimensional TiO2/Au nanofibers: Validation of an analytical assay for detection of diphenylamine in food samples

We report a one-dimensional titanium dioxide encapsulated with gold heterojunction nanofibers (TiO₂/Au NFs) as robust electrocatalysts for electrochemical detection of diphenylamine (DPA). A TiO₂/Au NFs were successfully synthesized by a coaxial electrospinning method. The formation of TiO₂/Au NFs was confirmed by various analytical and spectroscopic approaches. The fabricated TiO₂/Au NFs modified screen-printed carbon electrodes (SPCE) exhibit a well-enhanced detection activity towards DPA sensing as compared to other electrodes. Under the experimental conditions, the proposed electrode leading to the sensing range from 0.05 to 60 µM with a detection limit of 0.009 µM was obtained for the DPA detection. Moreover, the TiO₂/Au NFs/SPCE showed good selectivity towards the electrochemical oxidation of DPA. Interestingly, the TiO₂/Au NFs modified electrode was then applied to detect the effect of DPA on spiked content in the food samples.

Specifically triggered dissociation based ratiometric electrochemical sensor for H2O2 measurement in food samples

A novel ratiometric strategy based electrochemical sensor was developed to quantitative assay of H₂O₂ in different food samples. 4-aminophenylboronic acid pinacol ester (ABAPE) dissociation was specifically triggered by H₂O₂ to generate electro-active 4-aminophenol (4-AP), which not only can be oxidized to indirectly indicate the concentration of H₂O₂, but also endowed the sensor with high selectivity. Meanwhile, a reference probe of poly(thionine) (TH) was modified with ketjen black (KB) and gold nanoparticles (AuNPs) on electrode surface. KB and AuNPs displayed high electrocatalytic activity to 4-AP. A current ratio between 4-AP and TH (i/i_TH) showed a good linear relationship with the concentration of H₂O₂ in a range of 3.0 × 10^-7 - 1.0 × 10^-4 mol/L (0.010 ppm - 3.40 ppm) with a limit of detection of 2.6 × 10^-7 mol/L (0.009 ppm) (S/N = 3). Moreover, the ratiometric strategy based sensor possessed good accuracy, reliability, and stability, and successfully determined H₂O₂ in food samples with satisfactory results.

Functionalized Graphene Fiber Modified With MOF-Derived Rime-Like Hierarchical Nanozyme for Electrochemical Biosensing of H2O2 in Cancer Cells

The rational design and construction of high-performance flexible electrochemical sensors based on hierarchical nanostructure functionalized microelectrode systems are of vital importance for sensitive in situ and real-time detection of biomolecules released from living cells. Herein, we report a novel and facile strategy to synthesize a new kind of high-performance microelectrode functionalized by dual nanozyme composed of rime-like Cu₂(OH)₃NO₃ wrapped ZnO nanorods assembly [Cu₂(OH)₃NO₃@ZnO], and explore its practical application in electrochemical detection of hydrogen peroxide (H₂O₂) released from living cells. Benefiting from the merits of the unique hierarchical nanohybrid structure and high catalytic activities, the resultant Cu₂(OH)₃NO₃@ZnO-modified AGF microelectrode shows remarkable electrochemical sensing performance towards H₂O₂ with a low detection limit of 1 μM and a high sensitivity of 272 μA cm⁻² mM⁻¹, as well as good anti-interference capability, long-term stability, and reproducibility. These properties enabled the proposed microelectrode-based electrochemical platform to be applied for in situ amperometric tracking of H₂O₂ released from different types of human colon cells, thus demonstrating its great prospect as a sensitive cancer cell detection probe for the early diagnosis and management of various cancer diseases.

A novel artificial peroxisome candidate based on nanozyme with excellent catalytic performance for biosensing

Artificial peroxisome is of critical importance to supersede natural peroxisome in fabricating protocell system and disease treatment. Nevertheless, developing feasible artificial peroxisome with various stable functions remains a monumental challenge. Nanozyme with multiple enzyme-like activities can mimic natural enzymes in peroxisome, which make it a prospective candidate for artificial peroxisome design. Herein, we prepared a nanozyme with multiple peroxisomal-like activities - Pd nanoparticles functionalized nitrogen-doped porous carbon-reduced graphene oxide (PdNPs/N-PC-rGO). Due to its sandwich-like structure, the incorporation of N heteroatoms and the synergistic effect between PdNPs and N-PC-rGO bi-support, the PdNPs/N-PC-rGO exhibited triple peroxisomal-like activities including oxidase (OXD), peroxidase (POD) and catalase (CAT), leading it a promising alternative for artificial peroxisome exploration. Furthermore, the PdNPs/N-PC-rGO showed high electrocatalytic activity, which could be employed for the detection of electrochemical active substances reduced glutathione (GSH). The PdNPs/N-PC-rGO modified electrode displayed a wide concentration range from 70 nM to 1500 μM, with a very low detection limit of 9.8 nM (S/N = 3). Therefore, PdNPs/N-PC-rGO was a promising nanozyme for various biotechnological applications such as artificial organelles, biosensing, cytoprotection, disease diagnosis and treatment.

Pd-Immobilized Schiff Base Double-Layer Macrocycle: Synthesis, Structures, Peroxidase Mimic Activity, and Antibacterial Performance

Di-, tri-, and tetra-aldehydes have been employed to access new [2 + 2] [2 + 3] and [2 + 4] double-layer Schiff base macrocycles. The [2 + 3] compound has been used for the immobilization of Pd and the resulting composite has been employed as a peroxidase-like mimetic using 3,3',5,5'-tetramethylbenzidine (TMB) as the substrate; the optimum conditions together with the catalytic kinetics of the enzyme-like activity is discussed. Based on the peroxidase-like catalytic activity, the Pd@Schiff base composite was found to exhibit excellent bactericidal activity against both Escherichia coli (Gram-negative bacterium) and Staphylococcus aureus (Gram-positive bacterium) in the presence of relatively low concentrations of H₂O₂. Furthermore, cytotoxicity measurements illustrate the biosafety of the Pd composite. The above-mentioned findings have the potential to guide the innovation of new Pd-based composites as enzyme mimetics and antibacterial materials.

A nanozyme-catalysis-based ratiometric electrochemical sensor for general detection of Cd2+

AuPt–rGO showed good peroxidase-like activity for the oxidation of OPD to DAP (a novel internal reference) and achieved sensitive and reliable detection of Cd2+ based on a ratiometric strategy.

Colorimetric detection of glucose by a hybrid nanomaterial based on amplified peroxidase-like activity of ferrosoferric oxide modified with gold–platinum heterodimer

An easy and sensitive colorimetric sensor based on the Fe3O4@Au–Pt hybrid nanomaterial was constructed for H2O2 and glucose detection.

One-Pot Facile Synthesis of Noble Metal Nanoparticles Supported on rGO with Enhanced Catalytic Performance for 4-Nitrophenol Reduction

In this study, reduced graphene oxide (rGO)-supported noble metal (gold, silver, and platinum) nanoparticle catalysts were prepared via the one-pot facile co-reduction technique. Various measurement techniques were used to investigate the structures and properties of the catalysts. The relative intensity ratios of I_D/I_G in rGO/Au, rGO/Ag, rGO/Pt, and GO were 1.106, 1.078, 1.047, and 0.863, respectively. The results showed the formation of rGO and that noble metal nanoparticles were decorated on rGO. Furthermore, the catalytic activities of the designed nanocomposites were investigated via 4-nitrophenol. The catalysts were used in 4-nitrophenol reduction. The catalytic performance of the catalysts was evaluated using the apparent rate constant k values. The k value of rGO/Au was 0.618 min^-1, which was higher than those of rGO/Ag (0.55 min^-1) and rGO/Pt (0.038 min^-1). The result proved that the rGO/Au catalyst exhibited a higher catalytic performance than the rGO/Ag catalyst and the rGO/Pt catalyst. The results provide a facile method for the synthesis of rGO-supported nanomaterials in catalysis.

Optical/electrochemical methods for detecting mitochondrial energy metabolism

This review highlights the biological importance of mitochondrial energy metabolism and the applications of multiple optical/electrochemical approaches to determine energy metabolites. Mitochondria, the main sites of oxidative phosphorylation and adenosine triphosphate (ATP) biosynthesis, provide the majority of energy required by aerobic cells for maintaining their physiological activity. They also participate in cell growth, differentiation, information transmission, and apoptosis. Multiple mitochondrial diseases, caused by internal or external factors, including oxidative stress, intense fluctuations of the ionic concentration, abnormal oxidative phosphorylation, changes in electron transport chain complex enzymes and mutations in mitochondrial DNA, can occur during mitochondrial energy metabolism. Therefore, developing accurate, sensitive, and specific methods for the in vivo and in vitro detection of mitochondrial energy metabolites is of great importance. In this review, we summarise the mitochondrial structure, functions, and crucial energy metabolic signalling pathways. The mechanism and applications of different optical/electrochemical methods are thoroughly reviewed. Finally, future research directions and challenges are proposed.

NIR II Light-Response Au Nanoframes: Amplification of a Pressure- and Temperature-Sensing Strategy for Portable Detection and Photothermal Therapy of Cancer Cells

Quantitative detection of cancer cells using portable devices is promising for the development of simple, fast, and point-of-care cancer diagnostic techniques. However, how to further amplify the detection signal to improve the sensitivity and accuracy of detecting cancer cells by portable devices remains a challenge. To solve the problem, we, for the first time, synthesized folic-acid-conjugated Au nanoframes (FA-Au NFs) with amplification of pressure and temperature signals for highly sensitive and accurate detection of cancer cells by portable pressure meters and thermometers. The resulting Au NFs exhibit excellent near-infrared (NIR) photothermal performance and catalase activity, which can promote the decomposition of NH₄HCO₃ and H₂O₂ to generate corresponding gases (CO₂, NH₃, and O₂), thereby synergistically amplifying pressure signals in a closed reaction vessel. At the same time, Au NFs with excellent peroxidase-like activity can catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to produce TMB oxide (oxTMB) with a strong photothermal effect, thereby cooperating with Au NFs to amplify the photothermal signal. In the presence of cancer cells with overexpressing folate receptors (FRs), the molecular recognition signals between FA and FR can be converted into amplified pressure and temperature signals, which can be easily read by portable pressure meters and thermometers, respectively. The detection limits for cancer cells using pressure meters and thermometers are 6 and 5 cells/mL, respectively, which are better than other reported methods. Moreover, such Au NFs can improve tumor hypoxia by catalyzing the decomposition of H₂O₂ to produce O₂ and perform photothermal therapy of cancer. Together, our work provides new insight into the application of Au NFs to develop a dual-signal sensing platform with amplification of pressure and temperature signals for portable and ultrasensitive detection of cancer cells as well as personalized cancer therapy.

Gold-Platinum Nanodots with High-Peroxidase-like Activity and Photothermal Conversion Efficiency for Antibacterial Therapy

Combined therapeutic strategies for bacterial infection have attracted worldwide attention owing to their faster and more effective therapy with fewer side effects compared with monotherapy. In this work, gold-platinum nanodots (AuPtNDs) are simply and quickly synthesized by a one-step method. They not only exhibit powerful peroxidase-like activity but also confer a higher affinity for hydrogen peroxide (H2O2), which is 3.4 times that of horseradish peroxidase. Under 808 nm laser irradiation, AuPtNDs also have excellent photothermal conversion efficiency (50.53%) and strong photothermal stability. Excitingly, they can combat bacterial infection through the combination of chemodynamic and photothermal therapy. In vitro antibacterial results show that the combined antibacterial strategy has a broad-spectrum antibacterial property against both Escherichia coli (Gram negative, 97.1%) and Staphylococcus aureus (Gram positive, 99.3%). Animal experiments further show that nanodots can effectively promote the healing of bacterial infection wounds. In addition, owing to good biocompatibility and low toxicity, they are hardly traceable in the main organs of mice, which indicates that they can be well excreted through metabolism. These results reveal the application potential of AuPtNDs as a simple and magic multifunctional nanoparticle in antibacterial therapy and open up new applications for clinical anti-infective therapy in the near future.

Biomimetic electrochemical sensors: New horizons and challenges in biosensing applications

The urge to meet the ever-growing needs of sensing technology has spurred research to look for new alternatives to traditional analytical methods. In this scenario, the glucometer is the flagship of commercial electrochemical sensing platforms, combining selectivity, reliability and portability. However, other types of enzyme-based biosensors seldom achieve the market, in spite of the large and increasing number of publications. The reasons behind their commercial limitations concern enzyme denaturation, and the high costs associated with procedures for their extraction and purification. In this sense, biomimetic materials that seek to imitate the desired properties of natural enzymes and biological systems have come out as an appealing path for robust and sensitive electrochemical biosensors. We herein portray the historical background of these biomimicking materials, covering from their beginnings until the most impactful applications in the field of electrochemical sensing platforms. Throughout the discussion, we present and critically appraise the major benefits and the most significant drawbacks offered by the bioinspired systems categorized as Nanozymes, Synzymes, Molecularly Imprinted Polymers (MIPs), Nanochannels, and Metal Complexes. Innovative strategies of fabrication and challenging applications are further reviewed and evaluated. In the end, we ponder over the prospects of this emerging field, assessing the most critical issues that shall be faced in the coming decade.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

One-pot synthesis of AuAgPd trimetallic nanoparticles with peroxidase-like activity for colorimetric assays

In this work, AuAgPd trimetallic nanoparticles (AuAgPd TNPs) with intrinsic and broad-spectrum peroxidase-like activity were synthesized through a one-pot method by co-reduction of HAuCl₄, AgNO₃, and Na₂PdCl₄ with NaBH₄. The morphology and composition of AuAgPd TNPs were characterized. The peroxidase-like activity of AuAgPd TNPs were highly dependent on the composition and nanostructure of AuAgPd TNPs. Rationally designed AuAgPd TNPs could catalyze the oxidation of various chromogenic substrates including 3,3'5,5'-tetramethylbenzidine (TMB), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS), and o-phenylenediamine (OPD) by H₂O₂ to generate blue, green, and yellow products, respectively. Kinetic assays indicated that AuAgPd TNPs exhibited high affinity to H₂O₂. Then, sensitive colorimetric assays were developed for H₂O₂ detection by using ABTS, OPD, and TMB as chromogenic substrates, respectively. Lowest limit of detection (LOD) of 3.1 μM with wide linear range of 6-250 μM was obtained by using ABTS as substrate. Hydrogen sulfide ion (HS^-) could effectively inhibit the peroxidase-like activity of AuAgPd TNPs. Thus, a selective colorimetric assay was further fabricated for HS^- detection with LOD of 2.3 μM. This work provides an effective way for the synthesis of trimetallic nanozyme with peroxidase-like activity and also for tailoring their catalytic activity for desired use. Graphical abstract.

Iron-Imprinted Single-Atomic Site Catalyst-Based Nanoprobe for Detection of Hydrogen Peroxide in Living Cells

Fe-based single-atomic site catalysts (SASCs), with the natural metalloproteases-like active site structure, have attracted widespread attention in biocatalysis and biosensing. Precisely, controlling the isolated single-atom Fe-N-C active site structure is crucial to improve the SASCs' performance. In this work, we use a facile ion-imprinting method (IIM) to synthesize isolated Fe-N-C single-atomic site catalysts (IIM-Fe-SASC). With this method, the ion-imprinting process can precisely control ion at the atomic level and form numerous well-defined single-atomic Fe-N-C sites. The IIM-Fe-SASC shows better peroxidase-like activities than that of non-imprinted references. Due to its excellent properties, IIM-Fe-SASC is an ideal nanoprobe used in the colorimetric biosensing of hydrogen peroxide (H₂O₂). Using IIM-Fe-SASC as the nanoprobe, in situ detection of H₂O₂ generated from MDA-MB-231 cells has been successfully demonstrated with satisfactory sensitivity and specificity. This work opens a novel and easy route in designing advanced SASC and provides a sensitive tool for intracellular H₂O₂ detection.

Catalytic amplification based on hierarchical heterogeneity bimetal-organic nanostructures with peroxidase-like activity

In this paper, integrating heterometallic units and nanostructures into metal-organic frameworks (MOFs) were applied to improve the sensitivity of detecting hydrogen peroxide (H₂O₂) in neutral solution. The bimetal-MOFs (CuCo-BDC) and GO composite (CuCo-BDC/GO) were first synthesized via an ordinary one-step solvothermal synthesis. The CuCo-BDC/GO with admirable peroxidase-like catalytic activity could be applied to detect H₂O₂. The results have low detection limit of 69 nM (S/N = 3) and a wide linear detection range, from 100 nM to 3.5 mM. This is superior to recently published biosensors based on noble metal nanomaterials, which confirms CuCo-BDC/GO as the MOF electrocatalysts with high performance. The remarkable electroanalytical performance of CuCo-BDC/GO is due to the presence of numerous open metal active sites, the synergistic effect of Cu²⁺ and Co²⁺, hierarchical structure with high-specific surface areas and the marvelous electrochemical properties of GO. Therefore, CuCo-BDC/GO is a powerful candidate for detecting H₂O₂ in electrochemical biosensing fields. Moreover, H₂O₂ detection in real samples can be done with the CuCo-BDC/GO, including human serum samples. Therefore, the novel CuCo-BDC/GO is a promising catalyst that can be applied in biotechnological and environmental applications.

Nanozyme based on graphene oxide modified with Fe3O4, CuO, and cucurbit[6]uril for colorimetric determination of homocysteine

A nanozyme based on graphene oxide modified with Fe₃O₄ NPs, CuO NPs, and cucurbit[6]uril has been successfully fabricated by a simple sonochemical technique. By employing CB[6] as a specific binding pocket and Fe₃O₄@CuO-GO as a peroxidase mimic, this novel nanozyme (BN I) is equipped with molecular recognition ability and enhanced peroxidase-like activity. On the basis of the inhibition effect of homocysteine (Hcy) towards the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) catalyzed by BN I, a simple colorimetric method is established for the sensitive and selective determination of Hcy. This proposed method displays a good linear response in the range 5-200 μM with a detection limit of 1.8 μM. In the practical assay of human plasma samples, the relative standard deviations (RSD) are lower than 11% and the recoveries are between 98.0 and 104.9%. In the assay of human urine samples, the RSD are below 9.0% and the recoveries range from 94.0 to 103.5%. The colorimetric method presented offers a convenient and accurate way for the determination of biomarkers in point-of-care testing (POCT).

Sensitive colorimetric assay for the determination of alkaline phosphatase activity utilizing nanozyme based on copper nanoparticle-modified Prussian blue

Nanozyme based on Prussian blue nanocubes (PB NCs) loaded with copper nanoparticles (Cu@PB NCs) was synthesized. The peroxidase (POD)-like activity of Cu@PB NCs was studied and utilized for detecting the activity of alkaline phosphatase (ALP). The Cu@PB NCs possess higher POD-like activity compared with PB NCs and natural horseradish peroxidase (HRP) due to the loading of copper nanoparticles. 3,3',5,5'-Tetramethylbenzidine (TMB) can be oxidized to oxTMB in the presence of Cu@PB NCs and H₂O₂, generating blue-colored compound, while introduction of pyrophosphate (PPi) leads to the POD-like activity of Cu@PB NCs decreased obviously. In the presence of ALP, PPi was hydrolyzed and then the POD-like activity of Cu@PB NCs was restored. So, according to the change of the POD-like activity of Cu@PB NCs, a sensitive colorimetric assay for ALP activity was reported. The limit of detection of the assay is 0.08 mU/mL, with linear range from 0.1 to 50 mU/mL. In addition, the assay was also applied for screening the inhibitors of ALP. Nanozyme based on Prussian blue nanocube (PB NCs) loaded with copper nanoparticles was synthesized and utilized for detecting the activity of alkaline phosphatase (ALP).

Fabrication of Bioresource-Derived Porous Carbon-Supported Iron as an Efficient Oxidase Mimic for Dual-Channel Biosensing

Herein, we designed a new strategy for fabricating a renewable bioresource-derived N-doped hierarchical porous carbon-supported iron (Fe/NPC)-based oxidase mimic. The obtained results suggested that Fe/NPC possessed a large specific surface area (1144 m²/g) and pore volume (0.62 cm³/g) to afford extensive Fe-Nx active sites. Taking advantages of the remarkable oxidase-mimicking activity, outstanding stability, and reusability of Fe/NPC, a novel dual-channel biosensing system was strategically fabricated for sensitively determining acetylcholinesterase (AChE) through the integration of Fe/NPC and fluorescent silver nanoclusters (AgNCs) for the first time. The limits of detection for AChE can achieve as low as 0.0032 and 0.0073 U/L by the outputting fluorometric and colorimetric dual signals, respectively. Additionally, this dual-signal system was applied to analyze human erythrocyte AChE and its inhibitor with robust analytical performance. This work provides one sustainable and effective avenue to apply a bioresource for fabricating an Fe/NPC-based oxidase mimic with high catalytic performance and also gives new impetuses for developing novel biosensors by applying Fe/NPC-based enzyme mimics as substitutes for the natural enzyme.

Cobalt metal-organic framework modified carbon cloth/paper hybrid electrochemical button-sensor for nonenzymatic glucose diagnostics

In the growing pandemic, family healthcare is widely concerned with the increase of medical self-diagnosis away from the hospital. A cobalt metal-organic framework modified carbon cloth/paper (Co-MOF/CC/Paper) hybrid button-sensor was developed as a portable, robust, and user-friendly electrochemical analytical chip for nonenzymatic quantitative detection of glucose. Highly integrated electrochemical analytical chip was successfully fabricated with a flexible Co-MOF/CC sensing interface, effectively increasing the specific area and catalytic sites than the traditional plane electrode. Based on the button-sensor, rapid quantitative detection of glucose was achieved in multiple complex bio-matrixes, such as serum, urine, and saliva, with desired selectivity, stability, and durability. With the advantages of low cost, high environment tolerance, ease of production, our nanozyme-based electrochemical analytical chip achieved reliable nonenzymatic electrocatalysis, has great potential for the application of rapid on-site analysis in personalized diagnostic and disease prevention.

Synergetic enhancement of electrochemical H2O2 detection in a nitrogen-doped carbon encapsulated FeCo alloy architecture

The development of Earth-abundant metal-based non-enzymatic electrodes with ultralow metal loadings for the efficient detection of hydrogen peroxide (H₂O₂) is highly desirable. We report here a remarkable three-dimensional nitrogen-doped porous carbon (NPC) encapsulated Earth-abundant metal architecture, i.e., NPC encapsulating FeCo alloy nanoparticles toward highly efficient electrochemical H₂O₂ detection. Specifically, an Fe_0.06Co_0.04@NPC-950 modified electrode can show excellent electrochemical performance for non-enzymatic H₂O₂ sensing in neutral media, with a wide linear range of 0.004 to 8 mM, a high sensitivity of 794 μA mA^-1 cm^-2 and a low limit of detection (LOD) of 0.13 μM, outperforming most of the reported non-noble metal electrocatalysts. Meanwhile, the fabricated Fe_0.06Co_0.04@NPC-950 modified electrode is capable of real-time monitoring of H₂O₂ in commercial orange juice, milk and serum, revealing its application potential toward the accurate detection of H₂O₂ in real-sample analysis. This electrode also has high selectivity, long-term stability and good reproducibility. Its excellent performance is correlated with the synergetic catalysis of the FeCo alloy, nitrogen-rich NPC with a large specific surface area (SSA) and the core-shell structure protecting the active sites from corrosion. This study offers an efficient pathway for developing high-performance and Earth-abundant catalysts toward electrochemical H₂O₂ detection.

ZIF-67-derived Co3O4 hollow nanocage with efficient peroxidase mimicking characteristic for sensitive colorimetric biosensing of dopamine

Co₃O₄ hollow nanocages (Co₃O₄ HNCs) were prepared by simple calcination with ZIF-67 as the precursor. Compared with ordinary nano-sized Co₃O₄, skeletal Co₃O₄ HNCs have a larger specific surface area and porosity, lead to better dispersion, which can expose more catalytic active sites, and obtain higher catalytic activity. Experiments indicate that Co₃O₄ HNCs are used as a catalyst to make H₂O₂ generate O₂. At the same time, Co₃O₄ HNCs act as bridge to accelerate the electrons transfer from the chromogenic substrate 3,3',5,5'-tetramethylbenzidine (TMB) to the dissolved oxygen and efficiently obtain blue oxidized TMB (oxTMB) at low concentration of H₂O₂. Steady-state kinetic analysis shows a lower K_m and a higher V_max value than other materials, indicating its excellent affinity and high catalytic efficiency. Based on the inhibitory effect of dopamine (DA) on TMB oxidation in the system, a sensitive, visual colorimetric biosensing method is developed. The calibration curve of DA has a good linear response at both high and low concentrations. Compared with other system, it has the unique advantage of very low detection limit, while retaining a wide detection range, and realizes the accurate detection of actual samples with different concentrations.

Detection Technologies for Reactive Oxygen Species: Fluorescence and Electrochemical Methods and Their Applications

Reactive oxygen species (ROS) have been found in plants, mammals, and natural environmental processes. The presence of ROS in mammals has been linked to the development of severe diseases, such as diabetes, cancer, tumors, and several neurodegenerative conditions. The most common ROS involved in human health are superoxide (O2•-), hydrogen peroxide (H2O2), and hydroxyl radicals (•OH). Organic and inorganic molecules have been integrated with various methods to detect and monitor ROS for understanding the effect of their presence and concentration on diseases caused by oxidative stress. Among several techniques, fluorescence and electrochemical methods have been recently developed and employed for the detection of ROS. This literature review intends to critically discuss the development of these techniques to date, as well as their application for in vitro and in vivo ROS detection regarding free-radical-related diseases. Moreover, important insights into and further steps for using fluorescence and electrochemical methods in the detection of ROS are presented.