Highly Luminescent and Self-Enhanced Electrochemiluminescence of Tris(bipyridine) Ruthenium(II) Nanohybrid and Its Sensing Application for Label-Free Detection of MicroRNA

Dual-Ligand Ruthenium Coordination Polymer-Derived Self-Enhanced Electrochemiluminescent Emitters for Sensitive Detection of Procalcitonin

Ru-based electrochemiluminescence (ECL) coordination polymers are widely employed for bioanalysis and medical diagnosis. However, commonly used Ru-based coordination polymers face the limitation of low efficiency due to the long distance between the ECL reagent and the coreactant dispersed in detecting solution. Herein, we report a dual-ligand self-enhanced ECL coordination polymer, composed of tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) dichloride (Ru(dcbpy)32+) as ECL reactant ligand and ethylenediamine (EDA) as corresponding coreactant ligand into Zn2+ metal node, termed Zn-Ru-EDA. Zn-Ru-EDA shows excellent ECL performance which is attributed to the effective intramolecular electron transport between the two ligands. Furthermore, the dual-ligand polymer allows an anodic low excitation potential (+1.09 V) luminescence. The shift in the energy level of the highest occupied molecular orbital (HOMO) upward after the synthesis of the Zn-Ru-EDA has resulted in a reduced excitation potential. The low excitation potential reduced biomolecular damage and the destruction of the modified electrodes. The ECL biosensor has been constructed using Zn-Ru-EDA with high ECL efficiency for the ultrasensitive detection of a bacterial infection and sepsis biomarker, procalcitonin (PCT), in the range from 1.00 × 10-6 to 1.00 × 10 ng·mL-1 with outstanding selectivity, and the detection limit was as low as 0.47 fg·mL-1. Collectively, the dual-ligand-based self-enhanced polymer may provide an ideal strategy for high ECL efficiency improvement as well as designing new self-enhanced multiple-ligand-based coordination in sensitive biomolecular detection for early disease diagnostics.

Highly Active Coreactant-Capped and Water-Stable 3D@2D Core-Shell Perovskite Quantum Dots as a Novel and Strong Self-Enhanced Electrochemiluminescence Probe

Self-enhanced electrochemiluminescence (ECL) probes have attracted more and more attention in analytical chemistry for their significant simplification of the ECL sensing operation while improving the ECL sensing sensitivity. However, the development and applications of self-enhanced ECL probes are still in their infancy and mainly suffer from the requirement of a complicated synthesis strategy and relatively low self-enhanced ECL activity. In this work, we took advantage of the recently emerged perovskite quantum dots (PQDs) with high optical quantum yields and easy surface engineering to develop a new type of PQD-based self-enhanced ECL system. The long alkyl chain (C18) diethanolamine (i.e., N-octadecyldiethanolamine (ODA)) with high ECL coreactant activity was selected as a capping ligand to synthesize an ODA-capped PQD self-enhanced ECL probe. The preparation of the coreactant-capped PQDs is as simple as for the ordinary oleylamine (OAm)-capped PQDs, and the obtained ODA-capped PQDs exhibit very strong self-enhanced ECL activity, 82.5 times higher than that of traditional OAm-capped PQDs. Furthermore, the prepared ODA-PQDs have a unique nanostructure (ODA-CsPbBr3@CsPb2Br5), with the highly emissive 3D CsPbBr3 PQD as the core and the water-stable 2D CsPb2Br5 as the shell, which allows ODA-PQDs to be very stable in aqueous media. It is envisioned that the prepared ODA-3D@2D PQDs with the easy preparation method, strong self-enhanced ECL, and excellent water stability have promising applications in ECL sensing.

A novel biomimetic electrochemical taste-biosensor based on conformational changes of the taste receptor

Taste sensor, a useful tool which could detect and identify thousands of different chemical substances in liquid environments, has attracted continuous concern from beverage and foodstuff industry and its consumers. Although many taste sensing methods have been extensively developed, the assessment of tastant content remains challenging due to the limitations of sensor selectivity and sensitivity. Here we present a novel biomimetic electrochemical taste-biosensor based on bioactive sensing elements and immune amplification with nanomaterials carrier to address above concerns, while taking sweet taste perception as a model. The proposed biosensor based on ligand binding domain (T1R2 VFT) of human sweet taste receptor protein showed human mimicking character and initiated the application of immune recognition in gustation biosensor, which can precisely and sensitively distinguish sweet substances against other related gustation substances with detection limit of 5.1 pM, far less than that of taste sensors without immune amplification whose detection limit was 0.48 nM. The performance test demonstrated the biosensor has the capacity of monitoring the response of sweet substances in real food environments, which is crucial in practical. This biomimetic electrochemical taste-biosensor can work as a new screening platform for newly developed tastants and disclose sweet perception mechanism.

Cyanuric Acid-Functionalized Perovskite Nanocrystals toward Low Interface Impedance, High Environmental Stability, and Superior Electrochemiluminescence

Perovskite nanocrystals (PNs) have received much attention as luminescence materials in the field of electrochemiluminescence (ECL). However, as one key factor for determining the optoelectronic properties of the surface state of PNs, the surface passivation layer of PNs has enormous difficulty in simultaneously meeting the requirements of high ECL efficiency, conductivity, and stability. Herein, an effective surface modification strategy with cyanuric acid (CA) is used to solve such issue. As confirmed, the CA molecules are chemically anchored onto the surface of PNs via the Lewis interaction between π electrons of the triazine ring and the empty orbit of Pb2+. Benefiting from the above interaction, the electrochemical impedance of PNs is decreased greatly without the loss of light-emitting efficiency. Moreover, the stability of PNs under O2 exposure is improved by almost sixfold. These improvements are confirmed to be beneficial for enhancing the ECL behaviors of PNs under electrochemical operation. Upon cathode ECL driving conditions in aqueous media, the ECL intensity and efficiency of PNs are increased to 200 and 170%, respectively. This work provides a new modification strategy to holistically improve the ECL performance of PNs, which is instructive to exploring robust perovskite nanomaterials for electrochemical applications.

Carboxyl groups on carbon nanodots as co-reactant sites for anodic electrochemiluminescence of tris(2,2-bipyridine)ruthenium(II)

Carbon nanodots (C-dots) with good biocompatibility have been extensively utilized as co-reactants for electrochemiluminescence (ECL) of the tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)32+) system. However, the ECL intensity of this system is still relatively low and the mechanism of C-dots as co-reactants remains unclear, which greatly limits its further application in bio-analysis. In this work, we revealed that the carboxyl groups on C-dots are co-reactant sites for Ru(bpy)32+ ECL by systematically investigating the contribution of carboxyl, hydroxyl and carbonyl groups on the surface of C-dots to the ECL intensity. Further treatment with hydrogen peroxide to increase the carboxyl-group content on C-dots resulted in a 10-fold increase in ECL intensity over the original Ru(bpy)32+/C-dots system. This work provides new insights for the rational design of ECL systems with C-dots as co-reactants and offers new chances for further applications of C-dots in the field of ECL.

Efficient Electrochemiluminescence Sensing in Microfluidic Biosensors: A Review

Microfluidic devices are capable of handling 10-9 L to 10-18 L of fluids by incorporating tiny channels with dimensions of ten to hundreds of micrometers, and they can be fabricated using a wide range of materials including glass, silicon, polymers, paper, and cloth for tailored sensing applications. Microfluidic biosensors integrated with detection methods such as electrochemiluminescence (ECL) can be used for the diagnosis and prognosis of diseases. Coupled with ECL, these tandem devices are capable of sensing biomarkers at nanomolar to picomolar concentrations, reproducibly. Measurement at this low level of concentration makes microfluidic electrochemiluminescence (MF-ECL) devices ideal for biomarker detection in the context of early warning systems for diseases such as myocardial infarction, cancer, and others. However, the technology relies on the nature and inherent characteristics of an efficient luminophore. The luminophore typically undergoes a redox process to generate excited species which emit energy in the form of light upon relaxation to lower energy states. Therefore, in biosensor design the efficiency of the luminophore is critical. This review is focused on the integration of microfluidic devices with biosensors and using electrochemiluminescence as a detection method. We highlight the dual role of carbon quantum dots as a luminophore and co-reactant in electrochemiluminescence analysis, drawing on their unique properties that include large specific surface area, easy functionalization, and unique luminescent properties.

Nano-matrixes propped self-enhanced electrochemiluminescence biosensor for microRNA detection

MicroRNAs (miRNA) are the potential biomarker for breast cancer, a biosensor for detecting miRNA-21 was successfully prepared by covalently linking carbohydrazide (CON4H6) and tris (4,4 '- dicarboxylic acid-2,2' - bipyridyl) ruthenium dichloride (Ru (dcbpy)32+) as a self-enhanced emitter (Ru-CON4H6). The biosensor was prepared by coating the electrode with mesoporous silica encapsulated Ru-CON4H6 as luminophores (RMSNs) to covalently link a couple of DNA strands (Q1-H2). The RMSNs coated electrode exhibited strong ECL emission due to the intramolecular electron transfer between the electrochemically oxidized Ru (dcbpy)32+ and co-reactant CON4H6. In the presence of target miRNA-21 and an assistant hairpin H1, H2 could be released from the surface through a strand displacement reaction (SDR), and the reserved Q1 could form G-quadruplex upon the addition of K+. The formed G-quadruplex then interacted with Q2-Fc in the presence of Mg2+ to form a DNA complex on the biosensor surface, which quenched the nano-matrixes propped self-enhanced ECL emission through the electron exchange between Fc and electrode or oxidized ECL intermediates. Under optimal conditions, the ECL decrease showed a correlation with target concentration, leading to a biosensing method for sensitive detection of miRNA-21. The proposed ECL method demonstrated a detectable concentration range from 0.1 fM to 1 nM along with a detection limit of 0.03 fM, good accuracy, and acceptable reproducibility, showing that the self-enhanced ECL biosensing strategy supported by nano-matrix provided a new way for the ultrasensitive detection of miRNA, and promoted the development of breast cancer diagnosis.

A self-enhanced electrochemiluminescence array chip for portable label-free detection of SARS-CoV-2 nucleocapsid protein with smartphone

SARS-CoV-2 antigen detection plays a key role in the rapid diagnosis of COVID-19. However, current clinically used immunoassays are often limited by assay throughput, sensitivity, accuracy, and field operating conditions. To address these challenges, we constructed a self-enhanced electrochemiluminescence (ECL) array chip (SE2AC) for highly sensitive and label-free detection of SARS-CoV-2 nucleocapsid protein (N protein) with a facile and portable assay setup. Firstly, the self-enhanced ECL nanomaterials with inherent film-forming properties were synthesized by co-doping Ru(bpy)32+ and polyethyleneimine (PEI) in silica nanoparticles (Ru/PEI@SiO2). Secondly, a resistance-induced potential difference-based single-electrode electrochemical system (SEES) was adapted to serve as the electrode array to facilitate one-step assembly without the need for chip alignment. Thirdly, the chip electrode array was functionalized with the synthesized self-enhanced ECL emitters and captured antibodies. In addition, a portable detection box equipped with a smartphone was 3D-printed to serve as the chip holder and "dark room" for imaging acquisition. The SE2AC performance was validated with N protein with a limit of detection (LOD) of 0.47 pg/mL in the range of 1-10,000 pg/mL. Furthermore, the chip successfully detected the viral antigen residue as low as 1.92 pg/mL from diluted rehabilitation patients' serum samples. This is the first study reporting label-free detection of SARS-Cov-2 N protein based on a self-enhanced ECL immunosensor, which provides a novel facile method for highly sensitive diagnosis of COVID-19 with high throughput, portability, and low cost.

Ru(II)-modified metal organic framework as excellent electrochemiluminescence emitter for ultrasensitive nicotine detection

The sensitive and selective nicotine detection in cigarette is necessary due to the cigarette addiction problem and the neurotoxicity of nicotine on human body. In this study, a novel electrochemiluminescence (ECL) emitter with excellent performance was prepared for nicotine analysis, by combining Zr-based metal organic framework (Zr-MOF) and branched polyethylenimine (BPEI)-coated Ru(dcbpy)₃²⁺ through electrostatic interaction. Ru(dcbpy)₃²⁺ integrated by Zr-MOF could be catalyzed by the reaction intermediates SO₄^•-, produced from the co-reactant S₂O₈^2-, resulting in a significant increase in ECL response. Interestingly, SO₄^•- with strong oxidizing ability could preferentially oxidize nicotine, leading to ECL quenching. The constructed ECL sensor based on the Ru-BPEI@Zr-MOF/S₂O₈^2- system displayed ultrasensitive determination of nicotine with a lower detection limit of 1.9 × 10^-12 M (S/N = 3), which is three orders lower than previously reported ECL results and 4-5 orders lower than that of other types of method. This method puts forward a new approach for building efficient ECL system with greatly improved ECL sensitivity for nicotine detection.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Fabrication of a ratiometric electrochemiluminescence biosensor using single self-enhanced nanoluminophores for the detection of spermine

A ratiometric electrochemiluminescence strategy using a single luminophore for accurate and sensitive biomolecule detection could be immensely valuable in bioanalysis. Herein, an ultrasensitive ratiometric electrochemiluminescence sensing system was fabricated using a self-enhanced luminophore with dual-signal emission for the detection of spermine. A nanocomposite was synthesized by the covalent attachment of N, N-diisopropylethylenediamine onto glutathione-protected Au-Ag bimetallic nanoclusters (DPEA-GSH@Au/Ag BNCs). The nanocomposite exhibited efficient intra-cluster charge transfer to produce strong anodic self-enhanced electrochemiluminescence emission at 0.8 V without external co-reactants. Interestingly, the DPEA@GSH@Au-Ag BNCs exhibited cathodic electrochemiluminescence emission upon the addition of the co-reactant potassium persulfate at -1.6 V, exhibiting stable and efficient dual-signal electrochemiluminescence emission features at a continuous potential window of -1.75 to 1.2 V. Thus, they were used to fabricate a single-luminophore electrochemiluminescence sensor with dual emission. The cathodic emission of the biosensor gradually increased with increasing concentrations of spermine, whereas the anodic electrochemiluminescence intensity remained almost constant, enabling the ratiometric detection of spermine. The fabricated biosensor, with an internal standard, significantly improved the accuracy and reliability of spermine detection in a wide concentration range of 0.85 pM-100 μM, with a low limit of detection of 0.12 pM (S/N = 3) under optimum conditions. This single-luminophore electrochemiluminescence sensing system could be used for the detection of spermine and could guide the construction of ratiometric electrochemiluminescence sensors in the future.

Construction of efficient electrochemiluminescence resonance energy transfer sensor based on SnO2/SnS2QDs-Ru@IRMOF-3 composite for sensitive detection of procalcitonin

An efficient electrochemiluminescence resonance energy transfer (ECL-RET) method is proposed which combines the luminescent materials of tris(4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium(II) (energy donor) and tin dioxide and tin disulfide quantum dots (SnO₂/SnS₂QDs) (energy acceptor) into the isoreticular metal - organic framework-3 (IRMOF-3) material to form a composite. In this mode, the distance between the energy donor and the acceptor was greatly shortened, reducing the energy loss, and thereby effectively improving RET efficiency and further significantly improving the ECL signal. The obtained composite (SnO₂/SnS₂QDs-Ru@IRMOF-3) was combined with sandwich immunoreaction to construct an ECL immunosensor for the sensitive detection of procalcitonin (PCT). Under the optimized experimental conditions with a working potential of - 1.48 V (vs Ag/AgCl), the proposed PCT biosensor exhibited a linear concentration range of 1 × 10^-4-200 ng mL^-1, with a detection limit of 0.029 pg mL^-1 (S/N = 3). The biosensor was used to detect PCT in actual samples. The biosensor has broad application prospects in biological analysis and clinical diagnosis due to its high sensitivity, good selectivity, and good stability.

Dual-wavelength electrochemiluminescence biosensor based on a multifunctional Zr MOFs@PEI@AuAg nanocomposite with intramolecular self-enhancing effect for simultaneous detection of dual microRNAs

Rapid parallel detection of multi-targets has always been an exploration aim in electrochemiluminescence (ECL) assays. Herein, a multifunctional nanocomposite of Zr metal-organic frameworks (MOFs) @PEI@AuAg nanoclusters (NCs) with intense and stable dual-wavelength ECL was synthesized for the first time, and used to construct a new ECL biosensor for rapid simultaneous detection of dual targets. Notably, the novel ECL emitter Zr MOFs with high-performance was not only integrated with a co-reactant polyethyleneimine (PEI) to form a unique intramolecular self-enhancing structure, but also loaded a large number of another ECL emitter AuAg NCs, furthermore, AuAg NCs with superior electron transfer property can much enhance the electrical conductivity of the composites, thus achieving the goal of "killing three birds with one stone". Moreover, a unique stable and rigid three-dimensional DNA tetrahedron (TDN) structure was connected with two quenching probes BHQ1 and BHQ3 and immobilized on the composites-modified electrode, so ECL emission of the nanocomposites at two wavelengths of 535 nm and 644 nm were both quenched by resonance energy transfer (RET). In the presence of target miRNAs, the efficient DNA cycling double-amplification processes were performed by using exonuclease (T7 Exo) combined with DNA Walker, thus both quenching groups were separated to restore the ECL at two wavelengths, achieving simultaneous and rapid ECL detection of two miRNAs. Therefore, this present work not only opens a unique nanocomplex with dual wavelength ECL and self-enhancing performance, but also develops a highly sensitive ECL biosensor with promising value for rapid multi-target analysis in clinical fields.

Boron Carbon Nitride Nanosheets-Ru Nanocomposite Self-Enhancement Electrochemiluminescence Emitter with a Three-Dimensional DNA Network Structure as a Signal Amplifier for Ultrasensitive Detection of TK1 mRNA

In this study, a neoteric self-enhanced nanocomposite boron carbon nitride nanosheets (BCN NSs)-Ru obtained by chemical crosslinking between boron carbon nitride nanosheets (BCN NSs) and tris (4,4'-dicarboxylicacid-2,2'-bipyridyl) ruthenium(II) dichloride (Ru(dcbpy)₃Cl₂) was used as an emitter to build an electrochemiluminescence (ECL) biosensor for ultrasensitive detection of the cancer marker human thymidine kinase 1 (TK1) mRNA. Importantly, the self-enhanced BCN NSs-Ru could exhibit strong ECL emission because boron radicals and amine groups derived from BCN NSs could significantly enhance the ECL response of Ru(dcbpy)₃Cl₂, which avoided the defects of the long electron transfer path and large energy loss between the emitter and coreactant in the traditional coreaction ECL system. Impressively, in the presence of target TK1 mRNA, three-dimensional DNA network structure-labeled numerous ferrocene probes could be assembled to quickly quench the ECL signal of BCN NSs-Ru, resulting in improved biosensor sensitivity. The obtained "on-off" biosensor showed excellent stability and high sensitivity with a detection limit of 32.3 aM. In general, the developed strategy provided a new biosensing way for ultrasensitive detection of biomolecules in early disease diagnosis.

Quantum dots for electrochemiluminescence bioanalysis - A review

Electrochemiluminescence (ECL) bioanalysis has become increasingly important in various fields from bioanalysis to clinical diagnosis due to its outstanding merits, including low background signal, high sensitivity, and simple instrumentation. Quantum dots (QDs) are a significant theme in ECL bioanalysis since their excellent optical, electrochemical properties, and ease of functionalization endow them with versatile roles and new mechanisms of signal transduction in ECL. Herein, this review details recent advances of QDs-based ECL bioanalysis by using QDs as ECL emitters, coreactants, or ECL resonance energy transfer donors/acceptors, mainly focused on their optical and electrochemical properties and ECL reaction mechanism. In the end, we will discuss the current limitations and future developments in QDs ECL bioanalysis to address the requirement about selectivity, sensitivity, toxicity, and emerging applications.

Copper Ion and Ruthenium Complex Codoped Polydopamine Nanoparticles for Magnetic Resonance/Photoacoustic Tomography Imaging-Guided Photodynamic/Photothermal Dual-Mode Therapy

Phototherapy, such as photodynamic therapy (PDT) and photothermal therapy (PTT), refers to the therapeutic strategy using a visible or near-infrared (NIR) laser to generate free radicals or heat for noninvasive and localized tumor treatment. However, limited by the low photoconversion efficiency of therapeutic agents, a single treatment method can hardly lead to complete tumor ablation, even when enhancing the power density of the laser and/or prolonging the irradiation duration. In this work, copper ion and ruthenium complex codoped polydopamine nanoparticles (Cu(II)/LRu/PDA NPs) are designed for PDT/PTT dual-mode therapy. The doped LRu in the NPs can generate reactive oxygen species under visible laser irradiation and enable PDT. Because of the strong absorption in the NIR region, PDA can not only generate heat for PTT under irradiation but also be used for photoacoustic tomography (PAT) imaging. Meanwhile, the doping of Cu(II) in the NPs through the coordination with PDA facilitates T₁-weighted magnetic resonance imaging (MRI). Thus, MR/PAT imaging-guided PDT/PTT dual-mode therapy is achieved. The in vivo experiments indicate that the Cu(II)/LRu/PDA NPs can accumulate in HeLa tumors with a retention rate up to 8.34%ID/g. MR/PAT imaging can clearly identify the location and boundary of the tumors, permitting precise guidance for phototherapy. Under the combined effect of PDT and PTT, a complete ablation of HeLa tumors is achieved. The current work provides an alternative nanoplatform for performing PDT/PTT dual-mode therapy, which can be further guided by MR/PAT imaging.

Mismatch-fueled catalytic hairpin assembly mediated ultrasensitive biosensor for rapid detection of MicroRNA

Herein, a mismatch-fueled catalytic hairpin assembly (MCHA) was rationally engineered, which possessed higher amplification efficiency and faster rate than catalytic hairpin assembly (CHA). Once input target microRNA-21(miRNA-21) triggers the MCHA, the hairpin DNA H1 will be opened to form the duplex H1-miRNA-21, then the mismatched hairpin DNA H2 could easily hybridize with H1-miRNA-21 to generate duplex H1-H2 and the miRNA-21 could be released to enter next cycle, thus generating amounts of output products. Impressively, the MCHA realizes a pretty shorter complete reaction time of 40 min and quite higher amplification efficiency of 9.56 × 10⁶, which dramatically transcended the barrier: low amplification times and long reaction time in traditional CHA. As a proof of the concept, the elaborated MCHA as a hyper-efficiency and high-speed DNA signal-magnifier was successfully applied in ultrasensitive and rapid detection of miRNA-21 with the detection limit of 0.17 fM, which exploited an ingenious nucleic acid signal amplification technique for sensitive and fast detection of biomarkers in biosensing assay and clinic diagnose.

Disposable biosensor based on novel ternary Ru-PEI@PCN-333(Al) self-enhanced electrochemiluminescence system for on-site determination of caspase-3 activity

The number of death due to cancer-related diseases each year is at the alarming level and is constantly growing. Tools that can effectively and conveniently detect cancer cell apoptosis can play a significant role in cancer research, cancer therapy, and other related industries. Herein, we fabricated, for the first time, an ultrasensitive, disposable, self-enhanced off-on electrochemiluminescence (ECL) biosensor based on ternary Ru-PEI@PCN-333(Al) system to determine caspase-3 activity, the biomarker of apoptosis. The biosensor had a low detection limit of 0.017 pg/mL and was able to enhance the ECL emission and stability. A solid-state (SS) ECL strategy was adopted to overcome the relatively weak ECL emission due to the long distance between electrochemiluminophore and electrode surface. The analysis requires only one incubation step, which can significantly reduce the operational complexity and time. The biosensor had higher sensitivity, and the off-on ECL mode was achieved using caspase-3 as a switch. The on-site and rapid detection capability of the biosensor was achieved by the introduction of disposable screen-printed electrodes (SPEs). This study lays a foundation for the development of more advanced, ingenious, portable and reliable ECL devices for biosensing not only caspase-3, but also other bioanalytes.

Electrochemiluminescent emission potential tunable Cu-Zn-In-S/ZnS nanocrystals for multiplex microRNAs potential-resolved detection

The development of a multi-target simultaneous detection electrochemiluminescence (ECL) strategy remains a great research interest, however, the limited choice of ECL luminophores is the main limitation holding the field back. In this study, a band gap tunable Cu-Zn-In-S/ZnS nanocrystals (CZIS/ZnS NCs) was synthesized and applied to a potential-resolved ECL detection strategy. By changing the Cu ratio in the precursor, the CZIS/ZnS NCs ECL emission spectrum and emission potential were tuned from 480 to 750 nm and -2.10 to -1.11 V, respectively. In addition, an ECL biosensor was fabricated with CZIS/ZnS NCs as signal reporters to detect three types of microRNAs, which could sensitively and selectively determine microRNA-21, microRNA-141, and microRNA-155 in a single cathodic ECL process. The results showed that the ECL intensity was directly linear to the logarithm of the concentration of microRNA-21, microRNA-141, and microRNA-155 from 0.00001 to 10 nM with detection limits of 2.2, 2.6, and 2.7 fM, respectively. This study demonstrates that the emission potential tunable CZIS/ZnS NCs can be employed as a promising alternative to the toxic II-V and II-V NCs to simultaneously detect multiple disease markers, and can guide the further rational design of both ECL luminophores and multi-analyte ECL sensors.

Coreactant-Free and Direct Electrochemiluminescence from Dual-Stabilizer-Capped InP/ZnS Nanocrystals: A New Route Involving n-Type Luminophore

Electrochemiluminescence (ECL) is conventionally generated in either an annihilation or a coreactant route, and the overwhelming majority of ECL research is conducted in the coreactant route via oxidizing or reducing the coexisting coreactant and luminophore. The coreacant-free ECL generated via merely oxidizing the luminophore would break through the ceiling of coreactant ECL via excluding the detrimental effects of exogenous coreactant and dissolved oxygen. Herein, by exploiting the rich-electron nature of n-type nanocrystals (NCs), coreacant-free ECL is achieved via merely oxidizing 3-mercaptopropionic acid (MPA) and mercaptosuccinic acid (MSA) capped InP/ZnS NCs, i.e., InP/ZnS_MPA-MSA. The electron-rich InP/ZnS_MPA-MSA can be electrochemically injected with holes via two oxidative processes at around +0.75 and +1.37 V (vs Ag/AgCl), respectively, and the exogenous hole can directly combine the conduction band (CB) electron of InP/ZnS_MPA-MSA, resulting in two coreactant-free ECL processes without employing any exogenous coreactant. The deprotonation process for the carboxyl group of the capping agents can provide a negatively charged surface to InP/ZnS_MPA-MSA and enhance the coreactant-free ECL. The hole-injecting process at +1.37 is much stronger than that at +0.75 V and eventually enables an ∼2000-fold enhanced ECL at +1.37 V than that at +0.75 V. The ECL at +1.37 V can be utilized for coreactant-free ECL immunoassay with prostate-specific antigen (PSA) as analyte, which exhibits an acceptable linear response from 5 pg·mL^-1 to 1 ng·mL^-1 with a limit of detection of 0.3 pg·mL^-1. The coreactant-free ECL route would provide an alternative to both annihilation and coreactant routes, simplify the ECL assay procedure and deepening the ECL mechanism investigations.

Phosphate Group-Derivated Bipyridine-Ruthenium Complex and Titanium Dioxide Nanoparticles for Electrochemical Sensing of Protein Kinase Activity

Monitoring of protein kinase activity is of significance for fundamentals of biochemistry, biomedical diagnose, and drug screening. To reduce the usage of a relatively complicated bio-labeled signal probe, the phosphate group-derivated bipyridine-ruthenium (Pbpy-Ru) complex and titanium dioxide nanoparticles (TiO₂ NPs) were employed as signal probes to develop an electrochemical sensor for evaluating the protein kinase A (PKA) activity. Through the specific interaction between the phosphate groups and TiO₂ NPs, the preparation of a Pbpy-Ru-TiO₂ NP signal probe and its linkage with the phosphorylated PKA substrate peptides could be performed in a simple and effective way. The tethering of Pbpy-Ru onto the TiO₂ NP surface does not degrade the electrochemical property of the complex. The Pbpy-Ru-TiO₂ NP probe exhibits well-defined redox signals at about 1.0 V versus Ag/AgCl reference and notably has about fivefold current response than that of the TiO₂ NPs with physically adsorbed tris-(bipyridine)-Ru. The PKA activity evaluation was realized by measuring the electrochemical response of the Pbpy-Ru-TiO₂ NPs at the phosphorylated peptide-assembled electrode. Operating at optimal conditions, the cathodic signals at the potential of 1.03 V exhibit a good linearity with the PKA concentrations of 0.5-40 U mL^-1. The electrochemical sensor shows good selectivity, low detection limit (0.2 U mL^-1, signal/noise = 3), qualified reproducibility, and satisfactory applicability for PKA determination in the cell lysate. The Pbpy-Ru-TiO₂ NPs/electrode system would be an excellent electrochemical platform for protein phosphorylation monitoring and sensing.

A ratiometric fluorescence sensor based on carbon quantum dots realized the quantitative and visual detection of Hg2

In this paper, based on the fluorescence of carbon quantum dots (CQDs) quenched by mercury ions (Hg²⁺ ) and the nonresponse of Hg²⁺ to rhodamine B fluorescence, a dual emission ratio fluorescence sensor was constructed to realize the quantitative detection of Hg²⁺ . Under excitation at 365 nm, the fluorescence spectrum showed double emission peaks at 437 nm and 590 nm, corresponding to the fluorescence emissions of CQDs and rhodamine B, respectively. This method quantitatively detected Hg²⁺ based on the linear relationship between the ratio of the intensities of the two emission peaks F₄₃₇ /F₅₉₀ and the concentration of Hg²⁺ . The detection range was 10-70 nM, and the limit of detection (S/N = 3) was 3.3 nM. In addition, this method could also realize the qualitative and semiquantitative detection of Hg²⁺ according to the fluorescence colour change of the probe under ultraviolet light. After various evaluations, the method could be successfully applied to the quantitative and visual detection of Hg²⁺ in tap water, and demonstrated excellent selectivity, anti-interference performance, and repeatability of the method.

Carbon nanodot-based electrogenerated chemiluminescence biosensor for miRNA-21 detection

A simple carbon nanodot–based electrogenerated chemiluminescence biosensor is described for sensitive and selective detection of microRNA-21 (miRNA-21), a biomarker of several pathologies including cardiovascular diseases (CVDs). The photoluminescent carbon nanodots (CNDs) were obtained using a new synthesis method, simply by treating tiger nut milk in a microwave reactor. The synthesis is environmentally friendly, simple, and efficient. The optical properties and morphological characteristics of the CNDs were exhaustively investigated, confirming that they have oxygen and nitrogen functional groups on their surfaces and exhibit excitation-dependent fluorescence emission, as well as photostability. They act as co-reactant agents in the anodic electrochemiluminescence (ECL) of [Ru(bpy)₃]²⁺, producing different signals for the probe (single-stranded DNA) and the hybridized target (double-stranded DNA). These results paved the way for the development of a sensitive ECL biosensor for the detection of miRNA-21. This was developed by immobilization of a thiolated oligonucleotide, fully complementary to the miRNA-21 sequence, on the disposable gold electrode. The target miRNA-21 was hybridized with the probe on the electrode surface, and the hybridization was detected by the enhancement of the [Ru(bpy)₃]²⁺/DNA ECL signal using CNDs. The biosensor shows a linear response to miRNA-21 concentration up to 100.0 pM with a detection limit of 0.721 fM. The method does not require complex labeling steps, and has a rapid response. It was successfully used to detect miRNA-21 directly in serum samples from heart failure patients without previous RNA extraction neither amplification process.

Versatile Luminol/Dissolved Oxygen/Fe@Fe2O3 Nanowire Ternary Electrochemiluminescence System Combined with Highly Efficient Strand Displacement Amplification for Ultrasensitive microRNA Detection

Herein, a versatile ECL biosensor was fabricated for ultrasensitive detection of microRNA-21 (miRNA-21) from cancer cells based on a novel H₂O₂-free electrochemiluminescence (ECL) system (luminol/dissolved oxygen/Fe@Fe₂O₃ nanowires). Compared with the previously reported coreaction accelerator that needed a negative potential to produce reactive oxygen species (ROS), these newly discovered Fe@Fe₂O₃ nanowires could generate ROS in the detection solution immediately without the application of voltage, which narrowed down the detection potential range to avoid side reactions, favoring their practical application in biological systems. Especially, the Fe@Fe₂O₃ nanowires could produce H^• for activating dissolved oxygen into ROS to improve the ECL intensity dramatically, which initiates a novel pathway to promote the generation of ROS for the ECL system. In addition, an original strand displacement amplification coupled with strand displacement reaction (SDA-SDR) was developed to improve the conversion efficiency of the target for sensitive detection of miRNA-21. By virtue of the SDR, a quadruple quenching effect was achieved through each output DNA strand of SDA; hence, the nucleic acid signal amplification efficiency was effectively enhanced. As expected, on account of the superb activation performance of Fe@Fe₂O₃ nanowires and the outstanding amplification efficiency of the SDR-SDA strategy, the fabricated ECL biosensor realized ultrasensitive detection of miRNA-21 with a detection limit down to 52.5 aM. The established ECL sensing platform ushered a new route for H₂O₂-free detection and a promising biomarker assay method for clinical diagnosis.

Electrochemiluminescence biosensor for thrombin detection based on metal organic framework with electrochemiluminescence indicator embedded in the framework

Ru(dcbpy)₃²⁺-polyethyleneimine-L-lysine (Ru-PEI-L-lys) had been immobilized on metal organic frameworks (ZIF-8) to form an electrochemiluminescent(ECL) indicator (Ru-PEI-L-lys-ZIF-8). In this ECL indicator, PEI-L-lys is used as a co-reactant. Platinum nanoparticles (PtNPs) has been mixed with Ru-PEI-L-lys-ZIF-8 to form a thin film to increase the electron transfer rate and enhanced the ECL response of the system. The prepared material had been characterized carefully and been combined with high selectivity of aptamer to develop a ECL biosensor for thrombin detection. RecJ_f exonuclease (an ssDNA specific exonuclease) assistant target recycling amplification has been adopted to enhance the sensitivity of the system. The ECL response of the system has a linear relationship with logarithm of thrombin concentration in the range of 1 fM to 10 pM with a detection limit of 0.02 aM. This work not only provides a new strategy for the design and synthesis of high performance and stable ECL indicator, but also opens up a new approach for the development of highly sensitive ECL sensors for biological analysis.

Recent advances in heteroatom-doped graphene quantum dots for sensing applications

Graphene quantum dots (GQDs) are carbon-based fluorescent nanomaterials having various applications due to attractive properties. But the low photoluminescence (PL) yield and monochromatic PL behavior of GQDs put limitations on their real-time applications. Therefore, heteroatom doping of GQDs is recognized as the best approach to modify the optical as well as electronic properties of GQDs by modifying their chemical composition and electronic structure. In this review, the new strategies for preparing the heteroatom (N, B, S, P) doped GQDs by using different precursors and methods are discussed in detail. The particle size, emission wavelength, PL emissive color, and quantum yield of recently developed heteroatom doped GQDs are reported in this article. The investigation of structure, crystalline nature, and composition of heteroatom doped GQDs by various characterization techniques such as high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) are also described. The recent progress on the impact of mono or co-doping of heteroatoms on PL behavior, and optical, electrochemiluminescence (ECL), and electrochemical properties of GQDs is also surveyed. Further, heteroatom doped GQDs with attractive properties used in sensing of various metal ions, biomolecules, small organic molecules, etc. by using various techniques with different limits of detection are also summarized. This review provides progressive trends in the development of heteroatom doped GQDs and their various applications.

An intermolecular hydrogen-bond-induced quench-type Ru(dcbpy)32+/TPA electrochemiluminescence system by nitrogen-doped carbon quantum dots

Here, we show that nitrogen-doped carbon quantum dots (NCQDs) strongly inhibits the anodic electrochemiluminescence (ECL) signal of a tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) (Ru(dcbpy)₃²⁺)/tripropylamine (TPA) aqueous system. To determine the ECL-quenching mechanism, we used photoluminescence spectroscopy, UV-Visible absorption spectroscopy and dynamic simulation technology. Quenching of the ECL signal of Ru(dcbpy)₃²⁺/TPA by NCQDs was predominantly attributed to the interaction between Ru(dcbpy)₃²⁺ and NCQDs rather than that between TPA and NCQDs. Specifically, when Ru(dcbpy)₃²⁺ and NCQDs were in aqueous solution together, the carboxyl (-COOH) groups of Ru(dcbpy)₃²⁺ were in contact with oxygen- and nitrogen-containing groups on the surface of NCQDs and formed intermolecular hydrogen bonds. This process involved energy transfer from the excited-state Ru(dcbpy)₃²⁺ to the intermolecular hydrogen bonds, thus resulting in a decrease in the Ru(dcbpy)₃²⁺ ECL signal. On this basis, a quenching-type ECL sensor for the quantification of NCQDs was fabricated. The sensor had a wide linear range and an estimated detection limit of 0.0012 mg mL^-1, as well as excellent stability and selectivity. Satisfactory recoveries of 97.0-99.5% were obtained using the ECL sensor to quantify NCQDs in tap water. NCQDs could potentially be used as a quenching probe of Ru(dcbpy)₃²⁺ to construct various biosensors with widespread applications in the sensing field.

Recent advances of functional nucleic acids-based electrochemiluminescent sensing

Electroluminescence (ECL) has been used in extensive applications ranging from bioanalysis to clinical diagnosis owing to its simple device requirement, low background, high sensitivity, and wide dynamic range. Nucleic acid is a significant theme in ECL bioanalysis. The inherent versatile selective molecular recognition of nucleic acids and their programmable self-assembly make it desirable for the robust construction of nanostructures. Benefiting from their unique structures and physiochemical properties, ECL biosensing based on nucleic acids has experienced rapid growth. This review focuses on recent applications of nucleic acids in ECL sensing systems, particularly concerning the employment of nucleic acids as molecular recognition elements, signal amplification units, and sensing interface schemes. In the end, an outlook of nucleic acid-based ECL biosensing will be provided for future developments and directions. We envision that nucleic acids, which act as an essential component for both bioanalysis and clinical diagnosis, will provide a new thinking model and driving force for developing next-generation sensing systems.

A Dual Functional Self-Enhanced Electrochemiluminescent Nanohybrid for Label-Free MicroRNA Detection

The development of electrochemiluminescent (ECL) emitters with both intense ECL and excellent film-forming properties is highly desirable for biosensing applications. Herein, a facile one-pot preparation strategy was proposed for the synthesis of a self-enhanced ECL emitter by co-doping Ru(bpy)₃²⁺ and (diethylaminomethyl)triethoxysilane (DEAMTES) into an in situ-produced silica nanohybrid (DEAMTES@RuSiO₂). DEAMTES@RuSiO₂ not only possessed improved ECL properties but also exhibited outstanding film-forming ability, which are both critical for the construction of ECL biosensors. By coupling branched catalytic hairpin assembly with efficient signal amplification peculiarity, a label-free ECL biosensor was further constructed for the convenient and highly sensitive detection of miRNA-21. The as-fabricated ECL biosensor displayed a detection limit of 8.19 fM, much lower than those in previous reports for miRNA-21 and showed superior reliability for detecting miRNA-21-spiked human serum sample, demonstrating its potential for applications in miRNA-associated fundamental research and clinical diagnosis.

Electrochemiluminescence from a biocatalysis accelerated N-(aminobutyl)-N-(ethylisoluminol)/dissolved O2 system for microRNA detection

A kind of biocatalyst, laccase, has been employed as a biocompatible coreactant accelerator to efficiently catalyze coreactant (dissolved O₂) for generating high local concentration of superoxide radical (O₂^•-), acquiring high-intense electrochemiluminescence (ECL) emission of ABEI (N-(aminobutyl)-N-(ethylisoluminol))/dissolved O₂ system. Furthermore, a modified strand displacement reaction with excellent amplification efficiency was constructed by replacing traditional single strand DNA to the hairpin DNA as template for triggering the immobilization of more signal probes. As a result, the biosensor for microRNA-21 determination has preeminent selectivity and favorable sensitivity with detection limit down to 80.8 aM. Significantly, the devised strategy has blazed a new path for seeking more coreaction accelerators with splendid biocompatibility thus promoting the application of ternary ECL systems in biological analysis and clinical diagnosis.

A dual-model "on-super off" photoelectrochemical/ratiometric electrochemical biosensor for ultrasensitive and accurate detection of microRNA-224

A dual-model "on-super off" photoelectrochemical (PEC)/ratiometric electrochemical (EC) biosensor based on signal enhancing and quenching combining three-dimensional (3D) DNA walker strategy was designed for the ultrasensitive and accurate detection of microRNA-224 (miRNA-224). The "signal on" PEC state was achieved by methylene blue labeled hairpin DNA (MB-DNA) for sensitizing CdS QDs. Then numerous transformational ferrocene labeled DNAs (Fc-DNAs) converted by target-induced 3D DNA walker amplification with the help of Ag nanocubes (NCs) label DNA (Ag-DNA) were introduced to open hairpin MB-DNA. Such configuration change would relocate the sensitizer MB and the quencher Fc, whereas energy transfer placed between Ag NCs and CdS QDs, thereby significantly quenching the PEC signal to obtain "super off" state. Meanwhile, these changes resulted in a decreased oxidation peak current of MB (I_MB) and an increased that of Fc (I_Fc). MiRNA-224 was also detected on basis of the dual-signaling EC ratiometric method for complementary PEC detection. Benefiting from different mechanisms and relatively independent signal transduction, this approach not only avoided interference from difficult assembly but also outstandingly increased sensitivity by distance-controllable signal enhancing and quenching strategies. As a result, the detection ranges of 0.1-1000 fM with a low detection limit of 0.019 fM for PEC, and 0.52 to 500 fM with a low detection limit of 0.061 fM for EC, were obtained for miRNA-224, which opens a new avenue for designing numerous elegant biosensors with potential utility in bioanalysis and early disease diagnosis.

Enhanced electrochemiluminescence of CdS quantum dots capped with mercaptopropionic acid activated by EDC for Zika virus detection

Enhanced electrochemiluminescence (ECL) signals of CdS quantum dots capped with 3-mercaptopropionic acid (MPA@CdS QDs) have been observed after using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) to activate the carboxyl groups. The generated ECL signals are strong enough that their images can be captured using a Huawei mobile phone. A possible mechanism for the generation of enhanced ECL signals has been proposed. Then, a sandwich immunosensor platform for detecting Zika virus (ZIKV) was fabricated with silica microspheres as the carrier and MPA@CdS QDs as ECL signal labels. Due to the dual signal amplification of EDC activation and microsphere enrichment, good linearity from 1.0 fg mL-1 to 1.0 ng mL-1 was exhibited by the QD-based ECL immunosensor for ZIKV detection. The detection limit was 0.3 fg mL-1.

Accessing a Long-Lived 3LC State in a Ruthenium(II) Phenanthroline Complex with Appended Aromatic Groups

The photophysical properties of a series of heteroleptic Ru(II) complexes of the form [Ru(phen)₂(phen-5,6-R₂)]²⁺, where phen = 1,10-phenanthroline and R = phenyl (Ph), p-tert-butylbenzene (p-Ph-tBu), p-methoxybenzene (p-Ph-OMe), and 2-naphthalene (2-naph), have been measured. Variation of the R group does not greatly perturb the electronic properties of the ground state, which were explored with electronic absorption and resonance Raman spectroscopy and are akin to those of the archetypal parent complex [Ru(phen)₃]²⁺. All complexes were shown to possess emissive ³MLCT states, characterized through transient absorption and emission spectroscopy. However, an additional, long-lived excited state was observed in the Ru(II) naphthalene complex. The naphthalene substituents facilitate population of a 40 μs dark state which decays independently to that of the emissive ³MLCT state. This state was characterized as ³LC in nature, delocalized over the naphthalene substituted ligand.

An aptamer-binding DNA walking machine for sensitive electrochemiluminescence detection of tumor exosomes

An aptamer-binding DNA walking machine triggered by the recognition of aptamers to exosomes was firstly reported for sensitive electrochemiluminescence (ECL) detection of exosomes.