In Situ pH Measurements of Individual Levitated Microdroplets Using Aerosol Optical Tweezers

A water probe for direct pH measurement of individual particles via micro-Raman spectroscopy

The acidity of atmospheric aerosols influences fundamental physicochemical processes that affect climate and human health. We recently developed a novel and facile water-probe-based method for directly measuring of the pH for micrometer-size droplets, providing a promising technique to better understand aerosol acidity in the atmosphere. The complex chemical composition of fine particles in the ambient air, however, poses certain challenges to using a water-probe for pH measurement, including interference from interactions between compositions and the influence of similar compositions on water structure. To explore the universality of our method, it was employed to measure the pH of ammonium, nitrate, carbonate, sulfate, and chloride particles. The pH of particles covering a broad range (0-14) were accurately determined, thereby demonstrating that our method can be generally applied, even to alkaline particles. Furthermore, a standard spectral library was developed by integrating the standard spectra of common hydrated ions extracted through the water-probe. The library can be employed to identify particle composition and overcome the spectral overlap problem resulting from similar effects. Using the spectral library, all ions were identified and their concentrations were determined, in turn allowing successful pH measurement of multicomponent (ammonium-sulfate-nitrate-chloride) particles. Insights into the synergistic effect of Cl-, NO3-, and NH4+ depletion obtained with our approach revealed the interplay between pH and volatile partitioning. Given the ubiquity of component partitioning and pH variation in particles, the water probe may provide a new perspective on the underlying mechanisms of aerosol aging and aerosol-cloud interaction.

Size-dependent acidity of aqueous nano-aerosols

Understanding the accurate acidity of nano-aerosols is important for the research on atmospheric chemistry. Herein, we propose the contributions from both the aerosol size and multiphase buffer effect to the steady-state acidity of nano-aerosols at a constant aerosol water content (AWC) through molecular simulations. As increasing of the aerosol size, the solvation free energy (SFE, ΔGs) became more negative (decreasing by 3-130 kcal mol-1 for different types of species) and Henry's law constant (H) apparently increased (from e6 to e16 mol m-3 Pa-1) in the nano-aerosols compared to that in bulk solutions. The lower SFE led to lower solute pKa and pKb values; thus, the acidity of HSO4- and HNO3 and the alkalinity of NH3 showed positive relations with the aerosol size. The lower H also increased the pKa of gaseous solutes, leading to a decrease in the acidity of HNO3 and a shift from alkaline to acidic for the NH4+/NH3 buffer pair in the nano-aerosols. The present study revealed the relationship between aerosol acidity and solvent size from a microscopic perspective. Specifically, the acidity of aerosols containing HSO4-/SO42- and HNO3/NO3- decreased with an increase in their radii, whereas aerosols containing NH4+/NH3 exhibited an opposite trend. This phenomenon can be attributed to the disappearance of the interfacial effect with an increase in the size of the aerosols. The above conclusions are of great significance for studying the pH-dependent multi-phase chemical processes in aerosols.

Direct Observation of Particle-To-Particle Variability in Ambient Aerosol pH Using a Novel Analytical Approach Based on Surface-Enhanced Raman Spectroscopy

The pH of atmospheric aerosols is a key characteristic that profoundly influences their impacts on climate change, human health, and ecosystems. Despite widely performed aerosol pH research, determining the pH levels of individual atmospheric aerosol particles has been a challenge. This study presents a novel analytical technique that utilizes surface-enhanced Raman spectroscopy to assess the pH of individual ambient PM2.5-10 aerosol particles in conjunction with examining their hygroscopic behavior, morphology, and elemental compositions. The results revealed a substantial pH variation among simultaneously collected aerosol particles, ranging from 3.3 to 5.7. This variability is likely related to each particle's unique reaction and aging states. The extensive particle-to-particle pH variability suggests that atmospheric aerosols present at the same time and location can exhibit diverse reactivities, reaction pathways, phase equilibria, and phase separation properties. This pioneering study paves the way for in-depth investigations into particle-to-particle variability, size dependency, and detailed spatial and temporal variations of aerosol pH, thus deepening our understanding of atmospheric chemistry and its environmental implications.

Impact of pH on Gas-Particle Partitioning of Semi-Volatile Organics in Multicomponent Aerosol

The partitioning of semivolatile organic compounds (SVOCs) between the condensed and gas phases can have significant implications for the properties of aerosol particles. In addition to affecting size and composition, this partitioning can alter radiative properties and impact cloud activation processes. We present measurements and model predictions on how activity and pH influence the evaporation of SVOCs from particles to the gas phase, specifically investigating aqueous inorganic particles containing dicarboxylic acids (DCAs). The aerosols are studied at the single-particle level by using optical trapping and cavity-enhanced Raman spectroscopy. Optical resonances in the spectra enable precise size tracking, while vibrational bands allow real-time monitoring of pH. Results are compared to a Maxwell-type model that accounts for volatile and nonvolatile solutes in aqueous droplets that are held at a constant relative humidity. The aerosol inorganic-organic mixture functional group activity coefficients thermodynamic model and Debye-Hückel theory are both used to calculate the activities of the species present in the droplet. For DCAs, we find that the evaporation rate is highly sensitive to the particle pH. For acidity changes of approximately 1.5 pH units, we observe a shift from a volatile system to one that is completely nonvolatile. We also observe that the pH itself is not constant during evaporation; it increases as DCAs evaporate, slowing the rate of evaporation until it eventually ceases. Whether a DCA evaporates or remains a stable component of the droplet is determined by the difference between the lowest pKa of the DCA and the pH of the droplet.

Dual fluorescent hollow silica nanofibers for in situ pH monitoring using an optical fiber

This study reports a sensitive and robust pH sensor based on dual fluorescent doped hollow silica nanofibers (hSNFs) for in situ and real-time pH monitoring. Fluorescein isothiocyanate (FITC) and tris(2,2'-bipyridyl)dichlororuthenium(ii) hexahydrate (Ru(BPY)3) were chosen as a pH sensitive dye and reference dye, respectively. hSNFs were synthesized using a two-step method in a reverse micelle system and were shown to have an average length of 6.20 μm and average diameter of 410 nm. The peak intensity ratio of FITC/Ru(BPY)3 was used to calibrate to solution pH changes. An optical-fiber-based fluorescence detection system was developed that enabled feasible and highly efficient near-field fluorescence detection. The developed system enables fully automated fluorescence detection, where components including the light source, detector, and data acquisition unit are all controlled by a computer. The results show that the developed pH sensor works in a linear range of pH 4.0-9.0 with a fast response time of less than 10 s and minimal sample volume of 50 μL, and can be stored under dark conditions for one month without failure. In addition, the as-prepared hSNF-based pH sensors also have excellent long-term durability. Experimental results from ratiometric sensing confirm the high feasibility, accuracy, stability and simplicity of the dual fluorescent hSNF sensors for the detection of pH in real samples.

Optical trapping and light scattering in atmospheric aerosol science

Aerosol particles are ubiquitous in the atmosphere, and currently contribute a large uncertainty to climate models. Part of the endeavour to reduce this uncertainty takes the form of improving our understanding of aerosol at the microphysical level, thus enabling chemical and physical processes to be more accurately represented in larger scale models. In addition to modeling efforts, there is a need to develop new instruments and methodologies to interrogate the physicochemical properties of aerosol. This perspective presents the development, theory, and application of optical trapping, a powerful tool for single particle investigations of aerosol. After providing an overview of the role of aerosol in Earth's atmosphere and the microphysics of these particles, we present a brief history of optical trapping and a more detailed look at its application to aerosol particles. We also compare optical trapping to other single particle techniques. Understanding the interaction of light with single particles is essential for interpreting experimental measurements. In the final part of this perspective, we provide the relevant formalism for understanding both elastic and inelastic light scattering for single particles. The developments discussed here go beyond Mie theory and include both how particle and beam shape affect spectra. Throughout the entirety of this work, we highlight numerous references and examples, mostly from the last decade, of the application of optical trapping to systems that are relevant to the atmospheric aerosol.

Individual Micron-Sized Aerosol Qualitative Analysis-Combined Raman Spectroscopy and Laser-Induced Breakdown Spectroscopy by Optical Trapping in Air

The attribution of single particle sources of atmospheric aerosols is an essential problem in the study of air pollution. However, it is still difficult to qualitatively analyze the source of a single aerosol particle using noncontact in situ techniques. Hence, we proposed using optical trapping to combine gated Raman spectroscopy with laser-induced breakdown spectroscopy (LIBS) in a single levitated micron aerosol. The findings of the spectroscopic imaging indicated that the particle plasma formed by a single particle ablation with a pulsed laser within 7 ns deviates from the trapped particle location. The LIBS acquisition field of view was expanded using the 19-bundle fiber, which also reduces the fluctuation of a single particle signal. In addition, gated Raman was utilized to suppress the fluorescence and increase the Raman signal-to-noise ratio. Based on this, Raman can measure hard-to-ionize substances with LIBS, such as sulfates. The LIBS radical can overcome the restriction that Raman cannot detect ionic chemicals like fluoride and chloride in halogens. To test the capability of directly identifying distinctive feature compounds utilizing spectra, we detected anions using Raman spectroscopy and cations using LIBS. Four typical mineral aerosols are subjected to precise qualitative evaluations (marble, gypsum, baking soda, and activated carbon adsorbed potassium bicarbonate). To further validate the application potential for substances with indistinctive feature discrimination, we employed machine learning algorithms to conduct a qualitative analysis of the coal aerosol from ten different origin regions. Three data fusion methodologies (early fusion, intermediate fusion, and late fusion) for Raman and LIBS are implemented, respectively. The accuracy of the late fusion model prediction using StackingClassifier is higher than that of the LIBS data (66.7%) and Raman data (86.1%) models, with an average accuracy of 90.6%. This research has the potential to provide online single aerosol analysis as well as technical assistance for aerosol monitoring and early warning.

Raman spectroscopy for profiling physical and chemical properties of atmospheric aerosol particles: A review

Atmosphere aerosols have significant impact on human health and the environment. Aerosol particles have a number of characteristics that influence their health and environmental effects, including their size, shape, and chemical composition. A great deal of difficulty is associated with quantifying and identifying atmospheric aerosols because these parameters are highly variable on a spatial and temporal scale. An important component of understanding aerosol fate is Raman Spectroscopy (RS), which is capable of resolving chemical compositions of individual particles. This review presented strategic techniques, especially RS methods for characterizing atmospheric aerosols. The nature and properties of atmospheric aerosols and their influence on environment and human health were briefly described. Analytical methodologies that offer insight into the chemistry and multidimensional properties of aerosols were discussed. In addition, perspectives for practical applications of atmospheric aerosols using RS are featured.

Spatiotemporally Resolved pH Measurement in Aerosol Microdroplets Undergoing Chloride Depletion: An Application of In Situ Raman Microspectrometry

Acidity is a defining property of atmospheric aerosols that profoundly affects environmental systems, human health, and climate. However, directly measuring the pH of aerosol microdroplets remains a challenge, especially when the microdroplets' composition is nonhomogeneous or dynamically evolving or both. As a result, a pH measurement technique with high spatiotemporal resolution is needed. Here, we report a spatiotemporally resolved pH measurement technique in microdroplets using spontaneous Raman spectroscopy. Our target sample was the microdroplets comprising sodium chloride and oxalic acid─laboratory surrogates of sea spray aerosols and water-soluble organic compounds, respectively. Our measurements show that the chloride depletion from the microdroplets caused a continuous increase in pH by ∼0.5 units in 2 hours. Meanwhile, the surface propensity of chloride anions triggers a stable pH gradient inside a single droplet, with the pH at the droplet surface lower than that at the core by ∼ 0.4 units. The uncertainties arising from the Raman detection limit (±0.08 pH units) and from the nonideal solution conditions (-0.06 pH units) are constrained. Our findings indicate that spontaneous Raman spectroscopy is a simple yet robust technique for precise pH measurement in aerosols with high spatiotemporal resolution.

Aerosol pH and Ion Activities of HSO4- and SO42- in Supersaturated Single Droplets

Accurate determination of acidity (pH) and ion activities in aqueous droplets is a major experimental and theoretical challenge for understanding and simulating atmospheric multiphase chemistry. Here, we develop a ratiometric Raman spectroscopy method to measure the equilibrium concentration of sulfate (SO₄^2-) and bisulfate (HSO₄^-) in single microdroplets levitated by aerosol optical tweezers. This approach enables determination of ion activities and pH in aqueous sodium bisulfate droplets under highly supersaturated conditions. The experimental results were compared against aerosol thermodynamic model calculations in terms of simulating aerosol ion concentrations, ion activity coefficients, and pH. We found that the Extended Aerosol Inorganics Model (E-AIM) can well reproduce the experimental results. The alternative model ISORROPIA, however, exhibits substantial deviations in SO₄^2- and HSO₄^- concentrations and up to a full unit of aerosol pH under acidic conditions, mainly due to discrepancies in simulating ion activity coefficients of SO₄^2--HSO₄^- equilibrium. Globally, this may cause an average deviation of ISORROPIA from E-AIM by 25 and 65% in predicting SO₄^2- and HSO₄^- concentrations, respectively. Our results show that it is important to determine aerosol pH and ion activities in the investigation of sulfate formation and related aqueous phase chemistry.

Direct measurement of the pH of aerosol particles using carbon quantum dots

The pH of aerosol particles remains challenging to measure because of their small size, complex composition, and high acidity. Acidity in aqueous aerosol particles, which are found abundantly in the atmosphere, impacts many chemical processes from reaction rates to cloud formation. Only one technique - pH paper - currently exists for directly determining the pH of aerosol particles, and this is restricted to measuring average acidity for entire particle populations. Other methods for evaluating aerosol pH include filter samples, particle-into-liquid sampling, Raman spectroscopy, organic dyes, and thermodynamic models, but these either operate in a higher pH range or are unable to assess certain chemical species or complexity. Here, we present a new method for determining acidity of individual particles and particle phases using carbon quantum dots as a novel in situ fluorophore. Carbon quantum dots are easily synthesized, shelf stable, and sensitive to pH in the highly acidic regime from pH 0 to pH 3 relevant to ambient aerosol particles. To establish the method, a calibration curve was formed from the ratiometric fluorescence intensity of aerosolized standard solutions with a correlation coefficient (R²) of 0.99. Additionally, the pH of aerosol particles containing a complex organic mixture (COM) representative of environmental aerosols was also determined, proving the efficacy of using carbon quantum dots as pH-sensitive fluorophores for complex systems. The ability to directly measure aerosol particle and phase acidity in the correct pH range can help parametrize atmospheric models and improve projections for other aerosol properties and their influence on health and climate.

Water as a probe for pH measurement in individual particles using micro-Raman spectroscopy

Atmospheric aerosol acidity impacts numerous physicochemical processes, but the determination of particle pH remains a significant challenge due to the nonconservative nature of the H⁺ concentration ([H⁺]). Traditional measurements have difficulty in describing the practical state of an aerosol because they comprise chemical components or hypotheses that change the nature of the particles. In this work, we present a direct pH measurement that uses water as a general probe to detect [H⁺] in individual particles by micro-Raman spectroscopy. Containing the vibrational bands of ions and water influenced by ions, the spectra of hydrated ion were decomposed from the solution spectra as standard spectra by multivariate curve resolution analysis. Meanwhile, ratios of hydrated ions were calculated between the Raman spectra and standard spectra to evaluate concentration profiles of each ion. It demonstrated that good quantitative models between the ratio and concentration for all ions including H⁺ can be built with correlation coefficients (R²) higher than 0.95 for the solutions. The method was further applied to individual particle pH measurement. The pH value of sulfate aerosol particles was calculated, and the standard error was 0.09 using pH values calculated from the [HSO₄^-]/[SO₄^2-] as a reference. Furthermore, the applicability of the method was proven by detecting the pH value of chloride particles. Therefore, utilizing water, the most common substance, as the spectroscopic probe to measure [H⁺] without restriction of the ion system, this method has potential to measure the pH value of atmospheric particles with various compounds, although more work needs to be done to improve the sensitivity of the method.

Enhanced Rates of Transition-Metal-Ion-Catalyzed Oxidation of S(IV) in Aqueous Aerosols: Insights into Sulfate Aerosol Formation in the Atmosphere

The oxidation of S(IV) is a critical step in the fate of sulfur dioxide emissions that determines the amount of sulfate aerosol in the atmosphere. Herein, we measured accelerated S(IV) oxidation rates in micron-sized aqueous aerosols compared to bulk solutions. We have investigated both buffered and unbuffered systems across a range of pH values in the presence of atmospherically relevant transition-metal ions and salts and consistently found the oxidation rate to be accelerated by ca. 1-2 orders of magnitude in the aerosol. This enhancement is greater than can be explained by the enrichment of species in the aerosol compared to the bulk and indicates that surface effects and potentially aerosol pH gradients play important roles in the S(IV) oxidation process in the aqueous aerosol. In addition, our experiments were performed with dissolved S(IV) ions (SO₃^2-/HSO₃^-), allowing us to demonstrate that acceleration occurs in the condensed phase showing that enhanced sulfate formation is not exclusively due to gas-aerosol partitioning or interfacial SO₂ oxidation. Our findings are an important step forward in understanding larger than expected sulfate concentrations observed in the atmosphere and show that inorganic oxidation processes can be accelerated in micron-sized aqueous droplets compared to the bulk solution.

Micro-droplet Trapping and Manipulation: Understanding Aerosol Better for a Healthier Environment

Understanding the physicochemical properties and heterogeneous processes of aerosols is key not only to elucidate the impacts of aerosols on the atmosphere and humans but also to exploit their further applications, especially for a healthier environment. Experiments that allow for spatially control of single aerosol particles and investigations on the fundamental properties and heterogeneous chemistry at the single-particle level have flourished during the last few decades, and significant breakthroughs in recent years promise better control and novel applications aimed at resolving key issues in aerosol science. Here we propose graphene oxide (GO) aerosols as prototype aerosols containing polycyclic aromatic hydrocarbons, and GO can behave as two-dimensional surfactants which could modify the interfacial properties of aerosols. We describe the techniques of trapping single particles and furthermore the current status of the optical spectroscopy and chemistry of GO. The current applications of these single-particle trapping techniques are summarized and interesting future applications of GO aerosols are discussed.

Direct Liquid Extraction and Ionization Techniques for Understanding Multimolecular Environments in Biological Systems (Secondary Publication)

A combination of direct liquid extraction using a small volume of solvent and electrospray ionization allows the rapid measurement of complex chemical components in biological samples and visualization of their distribution in tissue sections. This review describes the development of such techniques and their application to biological research since the first reports in the early 2000s. An overview of electrospray ionization, ion suppression in samples, and the acceleration of specific chemical reactions in charged droplets is also presented. Potential future applications for visualizing multimolecular environments in biological systems are discussed.

Ionic-strength and pH dependent reactivities of ascorbic acid toward ozone in aqueous micro-droplets studied using aerosol optical tweezers

The heterogeneous oxidation reaction of single aqueous ascorbic acid (AH2) aerosol particles with gas-phase ozone was investigated in this study utilizing aerosol optical tweezers with Raman spectroscopy. The measured liquid-phase bimolecular rate coefficients of the AH2 + O3 reaction exhibit a significant pH dependence, and the corresponding values at ionic strength 0.2 M are (3.1 ± 2.0) × 105 M-1 s-1 and (1.2 ± 0.6) × 107 M-1 s-1 for pH ≈ 2 and 6, respectively. These results measured in micron-sized droplets are in agreement with those from previous bulk measurements, indicating that the observed aerosol reaction kinetics can be solely explained by liquid phase diffusion and AH2 + O3 reaction. Furthermore, the results indicate that high ionic strengths could enhance the liquid-phase rate coefficients of the AH2 + O3 reaction. The results also exhibit a negative ozone pressure dependence that can be rationalized in terms of a Langmuir-Hinshelwood type mechanism for the heterogeneous oxidation of AH2 aerosol particles by gas-phase ozone. The results of the present work imply that in acidified airway-lining fluids the antioxidant ability of AH2 against atmospheric ozone will be significantly suppressed.

Aerosol Optical Tweezers Elucidate the Chemistry, Acidity, Phase Separations, and Morphology of Atmospheric Microdroplets

ConspectusAerosol particles represent unique chemical environments because of their high surface area-to-volume ratio that promotes the effects of interfacial chemistry in confined environments. Properties such as viscosity, diffusivity, water content, pH, and morphology-following liquid-liquid phase separation-can strongly alter how a particle interacts with condensable vapors and reactive trace gases, thus modifying its continual evolution and environmental effects. Our understanding of this chemical evolution of atmospheric particulate matter and its environmental impacts is largely limited by our ability to directly observe how these critical particle properties respond to the addition or reactive uptake of new chemical components. Aerosol optical tweezers (AOT) stably trap particles in focused laser beams, providing positional control and the retrieval of many of these critical properties required to understand and predict the chemistry of aerosolized microdroplets. The analytical power of the AOT stems from the retrieval of the cavity-enhanced Raman spectrum induced by the trapping laser. Analysis of the whispering gallery modes (WGMs) that resonate as a standing wave around the droplet's interface, provide high accuracy measurements of the droplet's size, refractive index (and thus a measurement of composition), and can distinguish between core-shell, partially engulfed, and homogeneous morphologies. We have advanced the ability to determine the properties of the core and shell phases in biphasic droplets, including obtaining high-accuracy pH measurements. These capabilities were applied to perform AOT physical chemistry experiments on authentic secondary organic aerosol (SOA) produced directly in the AOT chamber by ozonolysis of terpene vapors. The propensity of the SOA to phase separate as a shell from a wide range of nonpolar to polar core phases was observed, along with the discovery of a stable emulsified state of SOA particles in an aqueous salt droplet. Micron-thick SOA shells did not impede the gain or loss of water or squalane from the core to the surrounding air, indicating no significant diffusional limitations to condensational growth or partitioning even under dry conditions. These experiments formed the foundation of a new framework that predicts how the phase-separated morphology of complex aerosols containing organic carbon evolves during continual atmospheric oxidation processes. Increases in oxidation state will quickly drive conversion from a partially engulfed to core-shell morphology that has dramatically different chemical reactivity since the core phase is completely concealed by the shell. The recent advances in the experimental capabilities of the AOT technique such as presented here enable novel experimental methodologies that provide insights into the chemistry and multidimensional properties of aerosol microdroplets, and how these coevolve and respond to continual chemical reactions.

Aerosol Acidity: Novel Measurements and Implications for Atmospheric Chemistry

The pH of a solution is one of its most fundamental chemical properties, impacting reaction pathways and kinetics across every area of chemistry. The atmosphere is no different, with the pH of the condensed phase driving key chemical reactions that ultimately impact global climate in numerous ways. The condensed phase in the atmosphere is comprised of suspended liquid or solid particles, known as the atmospheric aerosol, which are differentiated from cloud droplets by their much smaller size (primarily <10 μm). The pH of the atmospheric aerosol can enhance certain chemical reactions leading to the formation of additional condensed phase mass from lower volatility species (secondary aerosol), alter the optical and water uptake properties of particles, and solubilize metals that can act as key nutrients in nutrient-limited ecosystems or cause oxidative stress after inhalation. However, despite the importance of aerosol acidity for climate and health, our fundamental understanding of pH has been limited due to aerosol size (by number >99% of particles are <1 μm) and complexity. Within a single atmospheric particle, there can be hundreds to thousands of distinct chemical species, varying water content, high ionic strengths, and different phases (liquid, semisolid, and solid). Making aerosol analysis even more challenging, atmospheric particles are constantly evolving through heterogeneous reactions with gases and multiphase chemistry within the condensed phase. Based on these challenges, traditional pH measurements are not feasible, and, for years, indirect and proxy methods were the most common way to estimate aerosol pH, with mixed results. However, aerosol pH needs to be incorporated into climate models to accurately determine which chemical reactions are dominant in the atmosphere. Consequently, experimental measurements that probe pH in atmospherically relevant particles are sorely needed to advance our understanding of aerosol acidity.This Account describes recent advances in measurements of aerosol particle acidity, specifically three distinct methods we developed for experimentally determining particle pH. Our acid-conjugate base method uses Raman microspectroscopy to probe an acid (e.g., HSO₄^-) and its conjugate base (e.g., SO₄^2-) in individual micrometer-sized particles. Our second approach is a field-deployable colorimetric method based on pH indicators (e.g., thymol blue) and cell phone imaging to provide a simple, low-cost approach to ensemble average (or bulk) pH for particles in distinct size ranges down to a few hundred nanometers in diameter. In our third method, we monitor acid-catalyzed polymer degradation of a thin film (∼23 nm) of poly(ε-caprolactone) (PCL) on silicon by individual particles with atomic force microscopy (AFM) after inertially impacting particles of different pH. These measurements are improving our understanding of aerosol pH from a fundamental physical chemistry perspective and have led to initial atmospheric measurements. The impact of aerosol pH on key atmospheric processes, such as secondary organic aerosol (SOA) formation, is discussed. Some unique findings, such as an unexpected size dependence to aerosol pH and kinetic limitations, illustrate that particles are not always in thermodynamic equilibrium with the surrounding gas. The implications of our limited, but improving, understanding of the fundamental chemical concept of pH in the atmospheric aerosol are critical for connecting chemistry and climate.

Combining Mass Spectrometry of Picoliter Samples with a Multicompartment Electrodynamic Trap for Probing the Chemistry of Droplet Arrays

Single droplet levitation provides contactless access to the microphysical and chemical properties of micrometer-sized samples. Most applications of droplet levitation to chemical and biological systems use nondestructive optical techniques to probe droplet properties. To provide improved chemical specificity, we coupled a multicompartment quadrupole electrodynamic trap (QET) with single droplet mass spectrometry. Our QET continuously traps a monodisperse droplet population (tens to hundreds of droplets) and allows for the simultaneous sizing of a single droplet using its Mie scattering pattern. Single droplets are subsequently ejected into the ionization region of an ambient pressure inlet mass spectrometer. We optimized two complementary soft ionization techniques for picoliter aqueous droplets: (1) paper spray (PS) ionization and (2) thermal desorption glow discharge (TDGD) ionization. Both techniques detect oxygenated organic acids in single droplets, with signal-to-noise ratios >100 and detection limits on the order of 10 pg. Sensitivity and reproducibility across single droplets are driven by the droplet deposition location and spray stability in PS-MS and the ionization region humidity and analyte evaporation rate in TDGD-MS. Importantly, the analyte evaporation rate can control the TDGD-MS quantitative capability because high evaporation rates result in significant ion suppression. This effect is mitigated by optimizing the vaporization temperature, droplet size range, and analyte volatility. We demonstrate quantitative and reproducible measurements with a droplet internal standard (<10% RSD) and compare the sensitivity of PS-MS and TDGD-MS. Finally, we demonstrate the application of QET-MS to the study of heterogeneous chemical kinetics with the reaction of gas phase O₃ and aqueous maleic acid droplets.

Liquid-Liquid Phase Separation in Supermicrometer and Submicrometer Aerosol Particles

ConspectusThe interactions of aerosol particles with light and clouds are among the most uncertain aspects of anthropogenic climate forcings. The effects of aerosol particles on climate depend on their optical properties, heterogeneous chemistry, water uptake behavior, and ice nucleation activity. These properties in turn depend on aerosol physics and chemistry including composition, size, shape, internal structure (morphology), and phase state. The greatest numbers of particles are found at small, submicrometer sizes, and the properties of aerosol particles can differ on the nanoscale compared with measurements of bulk materials. As a result, our focus has been on characterizing the phase transitions of aerosol particles in both supermicrometer and submicrometer particles. The phase transition of particular interest for us has been liquid-liquid phase separation (LLPS), which occurs when components of a solution phase separate due to a difference in solubilities. For example, organic compounds can have limited solubility in salt solutions especially as the water content decreases, increasing the concentration of the salt solution, and causing phase separation between organic-rich and inorganic-rich phases. To characterize the systems of interest, we primarily use optical microscopy for supermicrometer particles and cryogenic-transmission microscopy for submicrometer particles.This Account details our main results to date for the phase transitions of supermicrometer particles and the morphology of submicrometer aerosol. We have found that the relative humidity (RH) at which LLPS occurs (separation RH; SRH) is highly sensitive to the composition of the particles. For supermicrometer particles, SRH decreases as the pH is lowered to atmospherically relevant values. SRH also decreases when non-phase-separating organic compounds are added to the particles. For submicrometer particles, a size dependence of morphology is observed in systems that undergo LLPS in supermicrometer particles. In the limit of slow drying rates, particles <30 nm are homogeneous and larger particles are phase-separated. This size dependence of aerosol morphology arises because small particles cannot overcome the activation barrier needed to form a new phase when phase separation occurs by a nucleation and growth mechanism. The inhibition of LLPS in small particles is observed for mixtures of ammonium sulfate with single organic compounds as well as complex organics like α-pinene secondary organic matter. The morphology of particles affects activation diameters for the formation of cloud condensation nuclei. These results more generally have implications for aerosol properties that affect the climate system. In addition, LLPS is also widely studied in materials and biological chemistry, and our results could potentially translate to implications for these fields.

Reimagining pH Measurement: Utilizing Raman Spectroscopy for Enhanced Accuracy in Phosphoric Acid Systems

Measurement of pH is an integral component of chemical studies and process control; however, traditional pH probes are difficult to utilize in harsh or complex chemical systems. Optical spectroscopy-based online monitoring offers a powerful and novel route for characterizing system parameters, such as pH, and is well adapted to deployment in harsh environments or chemically complex systems. Specifically, Raman spectroscopy combined with chemometric analysis can provide an improved method of online p[H⁺] measurement. Multivariate curve resolution (MCR) analysis of Raman spectra can be utilized to determine speciation as a function of p[H⁺], and the MCR scores assigned to each species can be used to calculate p[H⁺]. Subsequent chemometric modeling can be used to correlate spectral response to p[H⁺]. This was demonstrated with phosphoric acid, a chemical system known to challenge traditional pH probes. Raman spectra exhibit clear changes with pH due to changing speciation, and chemometric modeling can be successfully utilized to correlate those fingerprints to p[H⁺]. With the use of this approach, p[H⁺] of the phosphoric acid system can be accurately measured without foreknowledge of system conditions such as ionic strength.