Ambient Ionization Mass Spectrometry Today and Tomorrow: Embracing Challenges and Opportunities

Rapid Screening of New Psychoactive Substances Using pDART-QqQ-MS

Drug abuse is a severe social problem worldwide. Particularly, the issue of new psychoactive substances (NPSs) have increasingly emerged. NPSs are structural or functional analogs of traditional illicit drugs, such as cocaine, cannabis, and amphetamine; these molecules provide the same or more severe neurological effects. Usually, immunoassays are utilized in the preliminary screening method. However, NPSs have poor detectability in commercially available immunoassay kits. Meanwhile, various chromatography combined with the mass spectrometry platform have been developed to quantify NPSs. Still, a significant amount of time and resources are required during these procedures. Therefore, we established a rapid analytical platform for NPSs employing paper-loaded direct analysis in real time triple quadrupole mass spectrometry (pDART-QqQ-MS). We implemented this platform for the semiquantitative analysis of forensic drug tests in urine. This platform significantly shrinks the analytical time of a single sample within 30 s and requires a low volume of the specimen. The platform can detect 21 NPSs in urine mixtures at a lower limit of qualification of concentration ranging from 20 to 75 nanograms per milliliter (ng mL-1) and is lower than the cutoff value of currently available immune-based devices for detecting multiple drugs (1000 ng mL-1). Urine samples from drug addicts have been collected to verify the platform's effectiveness. By combining efficiency and accuracy, our platform offers a promising solution for addressing the challenges posed by NPSs in drug abuse detection.

Rapid Separation and Detection of Drugs in Complex Biological Matrix Using TD-CDI Mass Spectrometer

The drug detection technology plays a pivotal role in the domains of pharmaceutical regulation and law enforcement. In this study, we introduce a method that combines thermal desorption corona discharge ionization (TD-CDI) with mass spectrometry for efficient drug detection. The TD-CDI module, characterized by its compact and simple design, enables the separation of analytes within seconds and real-time presentation of one or two analyte peaks on the mass spectrum most of the time, which reduces matrix interference and improves detection performance. Through experimental investigation, we studied the characteristics of TD-CDI for analyte separation and detection, even with the same mass number, and optimized the TD-CDI approach. TD-CDI-MS was employed for the rapid detection of drugs in various traditional medicine, food products, and human samples. Additionally, by utilizing TD-CDI for segmented hair direct analysis, it becomes possible to trace the drug usage cycle of individuals. This underscores the feasibility of the proposed analytical method within the realm of drug detection.

Sorptive tape-spray tandem mass spectrometry using aluminum foil coated with mixed-mode microparticles

Direct mass spectrometry (MS) is an exciting strategy in bioanalysis, enabling rapid decision-making in different scenarios. Its application is usually hindered by matrix effects and the typically low concentration of the target compounds in the biofluids. In this sense, combining a previous sample preparation step minimizes or removes these shortcomings. This article describes sorptive tape-spray tandem mass spectrometry (STS-MS/MS) based on mixed-mode particles as a strategy to combine sample preparation and MS analysis in a single device. The technique uses a sorptive tape (ST) consisting of mixed-mode polymeric microparticles (combining ionic exchange and hydrophobic interactions) coated over aluminum foil in a spatial controlled way. The tapes act as the sorptive phases to isolate the analytes from the sample matrix and substrates for STS-MS/MS. The performance of the technique has been evaluated by developing a method to determine codeine in saliva as proof of concept. The affordability of the STs elements allows the preparation of many individual phases at low cost so that several samples can be extracted simultaneously, thus increasing the sample throughput. The extraction variables were optimized following a multivariate approach. Working under the optimum conditions, the limit of detection was 0.3 μg L-1, while the intraday precision, calculated as relative standard deviation (RSD) at three concentration levels, was better than 9.4 %. The accuracy, expressed as relative recovery, was in the range of 78-98 %. The method was also applied to the analysis of real samples. Despite being a powerful strategy, the direct combination of microextraction to MS is not always affordable in all laboratories. For this reason, the STs were also combined with commercial liquid chromatography-MS working under the direct infusion mode to demonstrate the usefulness of the ST in classical extraction workflows.

Laser-based analytical techniques in cultural heritage science - Tutorial review

This tutorial review combines the fundamentals of the design and operation of lasers with their usage in applications related to conservation and cultural heritage (CH) science - as components of analytical devices for the study of the chemical composition of materials. The development of laser instruments and their fundamental physical background, including a short explanation of their properties and parameters, are briefly summarised, and an overview of different laser-based analytical techniques is given. The analytical techniques covered in this tutorial are divided into three groups based on their technical aspects and properties: (1) vibrational spectroscopy, (2) elemental analysis, and (3) different molecular mass spectrometric techniques.

Developing a detection strategy for ten paralytic shellfish poisonings in urine, combining high-throughput DESI-MS screening and accurate UPLC-QqQ/MS quantification

Paralytic shellfish poisoning (PSP) is the most widespread and harmful form of shellfish poisoning with high mortality rate. In this study, a combined desorption electrospray ionization mass spectrometry (DESI-MS) and ultra-performance liquid chromatography triple quadrupole mass spectrometry (UPLC-QqQ/MS) method was established for the detection of PSPs in urine. The method was optimized using a spray solution of methanol and water (1:1, v/v) containing 0.1 % FA, at a flow rate of 2.5 µL·min-1 and an applied voltage of 3 kV. The limit of detection (LOD) for PSPs detection by DESI-MS was in the range of 87-265 μg·L-1, which basically meets the requirements for the rapid screening of PSPs. The LOD for UPLC-QqQ/MS was in the range of 2.2-14.9 μg·L-1, with a limit of quantification (LOQ) of 7.3-49.7 μg·L-1, thus fulfilling the quantitative demand for PSPs in urine. Finally, after spiking the urine samples of six volunteers with PSPs to a concentration of 100 μg·L-1, DESI-MS successfully and efficiently detected the positive samples. Subsequently, UPLC-QqQ/MS was employed for precise quantification, yielding results in the range of 84.6-95.1 μg·L-1. The experimental findings demonstrated that the combination of DESI-MS and UPLC-QqQ/MS enables high-throughput, rapid screening of samples and accurate quantification of positive samples, providing assurance for food safety and human health.

Arc plasma for high-efficiency ionization and scavenging of plasticizers in wrap films

Herein, ambient electric arc ionization mass spectrometry was used to examine 16 plasticizers in various wrap films, demonstrating high sensitivity (detection limit: <0.2 ng/mg) and precision (intra-/inter-day precision: <12 %). The ease of operation helps in the identification of wrap film and plasticizer analysis. In addition, the introduction of a cold arc plasma treatment presents a practical and innovative method for effectively eliminating plasticizers. This innovative strategy has implications for both environmental protection and food safety.

Ambient ionisation mass spectrometry for drug and toxin analysis: A review of the recent literature

Ambient ionisation mass spectrometry (AIMS) is a form of mass spectrometry whereby analyte ionisation occurs outside of a vacuum source under ambient conditions. This enables the direct analysis of samples in their native state, with little or no sample preparation and without chromatographic separation. The removal of these steps facilitates a much faster analytical process, enabling the direct analysis of samples within minutes if not seconds. Consequently, AIMS has gained rapid popularity across a diverse range of applications, in particular the analysis of drugs and toxins. Numerous fields rely upon mass spectrometry for the detection and identification of drugs, including clinical diagnostics, forensic chemistry, and food safety. However, all of these fields are hindered by the time-consuming and laboratory-confined nature of traditional techniques. As such, the potential for AIMS to resolve these challenges has resulted in a growing interest in ambient ionisation for drug and toxin analysis. Since the early 2000s, forensic science, diagnostic testing, anti-doping, pharmaceuticals, environmental analysis and food safety have all seen a marked increase in AIMS applications, foreshadowing a new future for drug testing. In this review, some of the most promising AIMS techniques for drug analysis will be discussed, alongside different applications of AIMS published over a 5-year period, to provide a summary of the recent research activity for ambient ionisation for drug and toxin analysis.

Integrating Post-Ionization Separation via Differential Mobility Spectrometry into Direct Analysis in Real Time Mass Spectrometry for Toy Safety Screening

Direct analysis in real time (DART) enables direct desorption and ionization of analytes, bypassing the time-consuming chromatographic separation traditionally required for mass spectrometry (MS) analysis. However, DART-MS suffers from matrix interference of complex samples, resulting in compromised detection sensitivity and quantitation accuracy. In this study, DART-MS was combined with differential mobility spectrometry (DMS) to provide an additional dimension of post-ionization ion mobility separation within a millisecond time scale, compensating for the lack of separation in DART-MS analysis. As proof-of-concept, primary aromatic amines (PAAs), a class of potentially hazardous chemicals, were analyzed in various toy products, including bubble solutions, finger paints, and plush toys. In addition to commercial Dip-it glass rod and metal mesh sampling tools, a customized rapid extractive evaporation device was designed for the accelerated extraction and sensitive analysis of solid toy samples. The incorporation of DMS in DART-MS analysis enabled the rapid separation and differentiation of isomeric analytes, leading to improved accuracy and reliability. The developed protocols were optimized and validated, achieving good linearity with correlation coefficients greater than 0.99 and acceptable repeatability with relative standard deviations less than 10%. Moreover, satisfactory sensitivity was realized with limits of detection and quantitation ranges of 0.2-5 and 1-20 μg/kg (μg/L) for the 11 PAA analytes. The established methodology was applied for the analysis of real toy samples (n = 18), which confirmed its appealing potential for toy safety screening and consumer health protection.

Collision-Induced Unfolding, Tandem MS, Bottom-up Proteomics, and Interactomics for Identification of Protein Complexes in Native Surface Mass Spectrometry

Endogenously occurring salts and nonvolatile matrix components in untreated biological surfaces can suppress protein ionization and promote adduct formation, challenging protein identification. Characterization of labile proteins within biological specimens is particularly demanding because additional purification or sample treatment steps can be time-intensive and can disrupt noncovalent interactions. It is demonstrated that the combined use of collision-induced unfolding, tandem mass spectrometry, and bottom-up proteomics improves protein characterization in native surface mass spectrometry (NSMS). This multiprong analysis is achieved by acquiring NSMS, MS/MS, ion mobility (IM), and bottom-up proteomics data from a single surface extracted sample. The validity of this multiprong approach was confirmed by the successful characterization of nine surface-deposited proteins, with molecular weights ranging from 8 to 147 kDa, in two separate mixtures. Bottom-up proteomics provided a list of proteins to match against observed proteins in NSMS and their detected subunits in tandem MS. The method was applied to characterize endogenous proteins from untreated chicken liver samples. The subcapsular liver sampling for NSMS analysis allowed for the detection of endogenous proteins with molecular weights of up to ∼220 kDa. Moreover, using IM-MS, collision cross sections and collision-induced unfolding pathways of enzymatic proteins and protein complexes of up to 145 kDa were obtained.

A strategy for the detection of benzodiazepine drugs using low-resolution paper-spray mass spectrometry for harm reduction drug checking

The ability to detect newly emerging substances is of great importance in reducing harms for people who use drugs. New psychoactive substances including novel benzodiazepines in the illicit drug supply have been linked to high rates of overdose deaths while complicating drug checking as an overdose prevention strategy. Paper-spray mass spectrometry (PS-MS) has emerged as a novel strategy to rapidly detect trace components in street drug samples. While targeted, low-resolution PS-MS methods have proven effective, newly emerging substances are often missed. To address this, a method was applied to low-resolution full-scan PS-MS data to aid in the early detection and identification of novel benzodiazepines in the unregulated drug supply. Using the developed method, true positives rates of 0.89 and 0.75 were achieved for bromazolam and etizolam in street samples obtained in a community drug checking service. The applicability of the method was further demonstrated for a novel benzodiazepine, desalkylgidazepam, that has recently emerged in the illicit drug supply.

OpenASAP: An affordable 3D printed atmospheric solids analysis probe (ASAP) mass spectrometry system for direct analysis of solid and liquid samples

Atmospheric Solids Analysis Probe (ASAP) mass spectrometry is a versatile technique allowing direct sampling of solid and liquid samples, but its adoption is limited due to the high cost of commercial ASAP systems. To address this, we present OpenASAP, an open-source ASAP system for mass spectrometers that can be fabricated for $20 or less using 3D-printing. Our design is readily adaptable to instruments from different manufacturers and can be produced with a variety of additive manufacturing techniques on consumer-grade 3D-printers. The probe allows for rapid sampling of solid and liquid samples without sample preparation, making it useful for high throughput screening, investigating spatial localization and function of analytes in biological samples, and incorporating mass spectrometry in instructional settings. We demonstrate its effectiveness by obtaining mass spectra of three natural product standards at levels as low as 10 ng/ml in liquid samples, and detecting these metabolites in microbial cultures that are difficult to analyze due to complex sample matrices or analyte properties. Furthermore, we demonstrate direct sampling of thin layer chromatography (TLC) spots of these cultures.

Slug-Flow Microextraction Mass Spectrometry for Enhanced Detection of Analytes in Human Tear Fluids using Noninvasive Microsampling and Nanoelectrospray Ionization via a Capillary

In vivo noninvasive sampling and sensitive analysis of human tear fluids at the microliter level is an important but challenging task in investigating eye health. In this work, capillary microsampling coupled with slug-flow microextraction mass spectrometry (SFME-MS) was developed for enhanced detection of analytes in human tear fluids. As low as 1.0 μL of human tear fluid could be directly sampled using a capillary, and extraction/spray solvent was then loaded into the capillary to perform slug-flow microextraction and direct nanoelectrospray ionization (nESI) of analytes. All analytical procedures, including tear microsampling, microextraction, and ionization of analytes, were performed using a capillary. Enhanced detection of therapeutic drugs and disease biomarkers in human tear fluids was successfully demonstrated. Acceptable analytical performances including sensitivity, reproducibility, and quantitation were obtained. It is found that the use of SFME could improve the nESI-MS detection of trace analytes over 100-fold that depends on the chemical properties of analytes. Overall, this study showed that SFME-nESI-MS is a highly effective method for enhanced detection of trace analytes in tear fluids and is expected to be a potentially powerful tool in significant biological and clinical applications.

Rapid fabrication of hydrophobic/hydrophilic patterns on paper substrates for paper spray mass spectrometry

A simple, rapid chemical coating and patterning method was developed and optimized for paper-based substrates for use in paper spray mass spectrometry (PS-MS). A variety of chlorosilanes were explored for coating paper substrates, and their effectiveness in forming hydrophobic surfaces was characterized via contact angle goniometry, scanning electron microscopy, and energy dispersive X-ray spectroscopy. Trichloromethylsilane was selected as the primary coating agent because of the short time required to produce a hydrophobic surface (contact angle > 130°), as well as the ease of patterning. Patterning was performed using 3D-printed masks and an oxygen/plasma cleaner. Optimal mask thickness and oxygen/plasma cleaning parameters were determined to produce channels varying from 0.5 to 2.5 mm in width. The effectiveness of the patterned substrates for PS-MS was determined via analysis of four antiretrovirals: emtricitabine, lamivudine, efavirenz, and dolutegravir. Calibration curves were made for each antiretroviral at varying channel widths, and the limits of detection and limits of quantification for each drug were determined. These results show that this patterning method results in an average 7.2-fold improvement in sensitivity and an average 190-fold improvement in limits of detection over uncoated paper substrates in a neat matrix. In a proof-of-concept experiment, calibration curves were generated for each antiretroviral in urine. A patterned paper substrate with a 2-mm channel resulted in an average 7.4-fold improvement in sensitivity and an average 18-fold improvement in limits of detection over uncoated paper substrates.

Direct mass spectrometry analysis of exhaled human breath in real-time

The molecular composition of exhaled human breath can reflect various physiological and pathological conditions. Considerable progress has been achieved over the past decade in real-time analysis of exhaled human breath using direct mass spectrometry methods, including selected ion flow tube mass spectrometry, proton transfer reaction mass spectrometry, extractive electrospray ionization mass spectrometry, secondary electrospray ionization mass spectrometry, acetone-assisted negative photoionization mass spectrometry, atmospheric pressure photoionization mass spectrometry, and low-pressure photoionization mass spectrometry. Here, recent developments in direct mass spectrometry analysis of exhaled human breath are reviewed with regard to analytical performance (chemical sensitivity, selectivity, quantitative capabilities) and applications of the developed methods in disease diagnosis, targeted molecular detection, and real-time metabolic monitoring.

Promise of spatially resolved omics for tumor research

Tumors are spatially heterogeneous tissues that comprise numerous cell types with intricate structures. By interacting with the microenvironment, tumor cells undergo dynamic changes in gene expression and metabolism, resulting in spatiotemporal variations in their capacity for proliferation and metastasis. In recent years, the rapid development of histological techniques has enabled efficient and high-throughput biomolecule analysis. By preserving location information while obtaining a large number of gene and molecular data, spatially resolved metabolomics (SRM) and spatially resolved transcriptomics (SRT) approaches can offer new ideas and reliable tools for the in-depth study of tumors. This review provides a comprehensive introduction and summary of the fundamental principles and research methods used for SRM and SRT techniques, as well as a review of their applications in cancer-related fields.

Construction of a Highly Selective Enrichment, Ionization, and Detection Platform Based on a Broad-Spectrum Antibody

Ambient mass spectrometry (AMS) allows direct analysis of various raw food samples with minimal or no sample pretreatment, but the trace analytes in complex food samples still have problems with limitations. In this work, we developed a platform based on coated stainless steel sheet spray mass spectrometry for fast, in situ, high-throughput, and high selectivity multiresidue analysis of fluoroquinolone drugs (FQs). The sensitivity of the platform was enhanced via coupling broad-spectrum antibodies against FQs to graphene oxide coated blade spray (CBS)-MS through a streptavidin-biotin (SA-biotin) interaction. The prepared platform had sufficient loading capacity for SA (1.37 mg/piece) and the antibody (84.8 μg/piece), which is greater than that of physical mixing and the EDC/NHS covalent coupling strategy. With simplified sample pretreatment, this platform demonstrated comparable sensitivity to high performance liquid chromatography-mass spectrometry (HPLC-MS/MS) (0.08-0.16 ng/mL in phosphate-buffered saline and 0.21-0.32 ng/mL in diluted milk). Meanwhile, compared with HPLC-MS/MS, the method is rapid (enrichment: 10 min, detection: <1 min) and acceptable recoveries (81.94-102.08%) can be obtained. The presence of analytes can be monitored by MS/MS spectra, and multiple analytes can be measured simultaneously in a single assay. This study is expected to provide a powerful and portable tool for rapid laboratory analysis and reliable screening in the field.

μPESI-MS/MS System for Screening and Quantitating Drugs in Plasma Samples

Recently, we developed a novel microprobe electrospray ionization (μPESI) source and its coupled MS (μPESI-MS/MS) system. Here, we aimed to widely validate the μPESI-MS/MS method for quantitative analysis of drugs in plasma samples. Furthermore, the relationship between the quantitative performance of the μPESI-MS/MS method and the physicochemical properties of target drugs was analyzed. The μPESI-MS/MS methods for quantitative analysis of 5 representative drugs with a relatively wide range of molecular weight, pK_a, and log P values were developed and validated. The results showed that the linearity, accuracy, and precision of these methods met the requirements of the European Medicines Agency (EMA) guidance. Then a total of 75 drugs from plasma samples were primarily detected using the μPESI-MS/MS methods, among which 48 drugs could be quantitatively measured. Logistics regression suggested that drugs with significantly greater log P and physiological charge had better quantitative performance using the μPESI-MS/MS method. Collectively, these results clearly demonstrate the practical application of the μPESI-MS/MS system as a rapid approach to the quantitative analysis of drugs in plasma samples.

Point-of-care applicable metabotyping using biofluid-specific electrospun MetaSAMPs directly amenable to ambient LA-REIMS

In recent years, ambient ionization mass spectrometry (AIMS) including laser ablation rapid evaporation IMS, has enabled direct biofluid metabolome analysis. AIMS procedures are, however, still hampered by both analytical, i.e., matrix effects, and practical, i.e., sample transport stability, drawbacks that impede metabolome coverage. In this study, we aimed at developing biofluid-specific metabolome sampling membranes (MetaSAMPs) that offer a directly applicable and stabilizing substrate for AIMS. Customized rectal, salivary, and urinary MetaSAMPs consisting of electrospun (nano)fibrous membranes of blended hydrophilic (polyvinylpyrrolidone and polyacrylonitrile) and lipophilic (polystyrene) polymers supported metabolite absorption, adsorption, and desorption. Moreover, MetaSAMP demonstrated superior metabolome coverage and transport stability compared to crude biofluid analysis and was successfully validated in two pediatric cohorts (MetaBEAse, n = 234 and OPERA, n = 101). By integrating anthropometric and (patho)physiological with MetaSAMP-AIMS metabolome data, we obtained substantial weight-driven predictions and clinical correlations. In conclusion, MetaSAMP holds great clinical application potential for on-the-spot metabolic health stratification.

From the laboratory to the field: Chemical analysis of colored smoke pyrotechnic formulations via mass spectrometry techniques

Smoke dyes are complex molecular systems that have the potential to form many molecular derivatives and fragments when deployed. The chemical analysis of smoke samples is challenging due to the adiabatic temperature of the pyrotechnic combustion and the molecular complexity of the physically dispersed reaction products. Presented here is the characterization of the reaction byproducts of a simulant Mk124 smoke signal on a multigram scale, which contain the dye disperse red 9 (1-(methylamino)anthraquinone), by ambient ionization mass spectrometry. Our previous work has examined the thermal decomposition of a simplified smoke system consisting of disperse red 9, potassium chlorate, and sucrose by anaerobic pyrolysis gas chromatography mass spectrometry performed at the laboratory milligram scale. The results from the lab scale test were compared with a fully functioned Mk124 in the field. To achieve this, Mk124 smokes were functioned in the presence of sampling swabs that collected byproduct residues from the smoke plume in the ambient environment. These swabs were then analyzed using ambient ionization mass spectrometry to identify the expended pyrotechnic residues, with particular interest in halogenated species. Previous work determined the toxicity of unforeseen byproducts identified on the laboratory scale, which were also detected in the field demonstrating the correlation of the laboratory testing to the fielded systems. By understanding the chemical composition of smokes and their reaction products, potential toxicity effects can be easily assessed, leading to safer formulations with improved performance. These results can help assess how smoke byproducts may impact Warfighter performance, personnel health, and the environment.

Mask device as a new wearable sampler for breath analysis: what can we expect in the future?

Human exhaled breath is becoming an attractive clinical source as it is foreseen to enable noninvasive diagnosis of many diseases. Because mask devices can be used for efficiently filtering exhaled substances, mask-wearing has been required in the past few years in daily life since the unprecedented COVID-19 pandemic. In recent years, there is a new development of mask devices as new wearable breath samplers for collecting exhaled substances for disease diagnosis and biomarker discovery. This paper attempts to identify new trends in mask samplers for breath analysis. The couplings of mask samplers with different (bio)analytical approaches, including mass spectrometry (MS), polymerase chain reaction (PCR), sensor, and others for breath analysis, are summarized. The developments and applications of mask samplers in disease diagnosis and human health are reviewed. The limitations and future trends of mask samplers are also discussed.

No skin off your back: the sampling and extraction of sebum for metabolomics

INTRODUCTION

Sebum-based metabolomics (a subset of "sebomics") is a developing field that involves the sampling, identification, and quantification of metabolites found in human sebum. Sebum is a lipid-rich oily substance secreted by the sebaceous glands onto the skin surface for skin homeostasis, lubrication, thermoregulation, and environmental protection. Interest in sebomics has grown over the last decade due to its potential for rapid analysis following non-invasive sampling for a range of clinical and environmental applications.

OBJECTIVES

To provide an overview of various sebum sampling techniques with their associated challenges. To evaluate applications of sebum for clinical research, drug monitoring, and human biomonitoring. To provide a commentary of the opportunities of using sebum as a diagnostic biofluid in the future.

METHODS

Bibliometric analyses of selected keywords regarding skin surface analysis using the Scopus search engine from 1960 to 2022 was performed on 12th January 2023. The published literature was compartmentalised based on what the work contributed to in the following areas: the understanding about sebum, its composition, the analytical technologies used, or the purpose of use of sebum. The findings were summarised in this review.

RESULTS

Historically, about 15 methods of sampling have been used for sebum collection. The sample preparation approaches vary depending on the analytes of interest and are summarised. The use of sebum is not limited to just skin diseases or drug monitoring but also demonstrated for other systemic disease. Most of the work carried out for untargeted analysis of metabolites associated with sebum has been in the recent two decades.

CONCLUSION

Sebum has a huge potential beyond skin research and understanding how one's physiological state affects or reflects on the skin metabolome via the sebaceous glands itself or by interactions with sebaceous secretion, will open doors for simpler biomonitoring. Sebum acts as a sink to environmental metabolites and has applications awaiting to be explored, such as biosecurity, cross-border migration, localised exposure to harmful substances, and high-throughput population screening. These applications will be possible with rapid advances in volatile headspace and lipidomics method development as well as the ability of the metabolomics community to annotate unknown species better. A key issue with skin surface analysis that remains unsolved is attributing the source of the metabolites found on the skin surface before meaningful biological interpretation.

Non-invasive Sampling of Human Body Fluids Using In Vivo SPME

Noninvasive body fluids offer attractive sources to gain insights into human health. The in vivo solid-phase microextraction (SPME) technique is a fast and versatile sample preparation technique for the noninvasive sampling of human body fluids in various fields. This chapter summarizes the applications of SPME coupled with mass spectrometry (MS)-based approaches for noninvasive investigations of human body fluids, including urine, sweat, and saliva. New features of noninvasive SPME sampling and MS-based analysis are highlighted, and the prospects on their further development are also discussed.

Direct Identification of Disaccharide Structural Isomers Using Ambient Ionization Tandem Mass Spectrometry with In Situ Methylation

Carbohydrates play critically important roles in energy supply and biological functions in living systems. However, it has been a great challenge to identify saccharides and distinguish their isomers because they have highly similar structures and many possible positions for glycosidic linkages. In this work, an ambient ionization tandem mass spectrometry method was developed to characterize disaccharide structural isomers with in situ methylation. The direct analysis in real time ion source can be used to facilitate the methylation reaction of disaccharides with tetramethylammonium hydroxide. The hydroxyl groups of disaccharides can be methylated instantaneously, and the products can be ionized at the same time. The methylated product ions from full scan mass spectrometry (MS) and tandem MS can be used to distinguish a variety of disaccharide structural isomers with different glycosidic linkages, compositions, and configurations. Characteristic marker ions were discovered, and they can be used for the assignment of linkage type and identification of specific isomeric forms. The method was used for the direct identification of disaccharide isomers from real commercial products such as honey, wine, and milk without complex sample pretreatment or chromatographic separation.

Applications of Mass Spectrometry in Dentistry

Mass Spectrometry (MS) is one of the fastest-developing methods in analytical instrumentation. As a highly sensitive, universal detector, it can identify known and unknown compounds, which can indeed be found in a minimal concentration. This review aims to highlight the significant milestones in MS applications in dentistry during recent decades. MS can be applied in three different fields of dentistry: (1) in research of dental materials and chemical agents, (2) in laboratory analysis of biospecimens, and (3) as a real-time diagnostic tool in service of oral surgery and pathology. MS applications on materials and agents may focus on numerous aspects, such as their clinical behavior, possible toxicity, or antimicrobial properties. MS is also a valuable, non-invasive tool for biomarkers' detection in saliva and has found great application in -omics technologies as it achieves efficient structure-finding in metabolites. As metabolites are located beyond the central dogma, this technique can provide a complete understanding of cellular functions. Thus, it is possible to determine the biological profile in normal and pathological conditions, detect various oral or systematic diseases and conditions, and predict their course. Lastly, some promising advances concerning the surgical approach to potentially oral malignant or malignant disorders exist. This breakthrough method provides a comprehensive approach to dental materials research and biomarker discovery in dental and craniofacial tissues. The current availability of various 'OMIC' approaches paves the way for individualized dentistry and provides suggestions for clinical applications in the point-of-care hubs.

Ambient ionization mass spectrometry applied to new psychoactive substance analysis

In the past decade a plethora of drugs with similar effects to controlled psychoactive drugs, like cannabis, amfetamine (amphetamine), or lysergic acid diethylamide, have been synthesized. These drugs can collectively be classified under the term new psychoactive substances (NPS) and are used for recreational purposes. The novelty of the substances, alongside the rapid rate of emergence and structural variability, makes their detection as well as their legal control highly challenging, increasing the demand for rapid and easy-to-use analytical techniques for their detection and identification. Therefore, interest in ambient ionization mass spectrometry applied to NPS has grown in recent years, which is largely because it is relatively fast and simple to use and has a low operating cost. This review aims to provide a critique of the suitability of current ambient ionization techniques for the analysis of NPS in the forensic and clinical toxicology fields. Consideration is given to analytical performance and ease of implementation, including ionization efficiency, selectivity, sensitivity, quantification, analyte chemistry, molecular coverage, validation, and practicality.

Focusing Plasma Desorption/Ionization Mass Spectrometry

A plasma-based source named focusing plasma desorption/ionization (FPDI) is described, which applies a high direct current voltage between a metal wire inside a polymeric hollow truncated cone and a piece of a one-sided coated conducting paper substrate. The conducting paper acts as both the counter electrode and the sample carrier. Upon the generation of a visible plasma beam, it would directly ionize the samples spotted on the conducting paper substrate or located around the plasma beam. The signal intensity of target analytes in mass spectrometric analysis is dependent highly on whether the conducting paper substrate is grounded or not, the type of conducting paper substrate, the inside diameter of the polymeric hollow truncated cone tip, the metal wire tip-to-polymer tip distance, the polymer tip-to-paper substrate distance, the applied voltage, and the helium flow rate. Based on the experimental observation, a plausible mechanism is proposed for the generation of the plasma beam from FPDI. Compared to the available low-temperature plasma, flowing atmospheric-pressure afterglow, and helium plasma ionization sources, FPDI has demonstrated higher sensitivity and better compatibility with commercial mass spectrometers without any extra power supplies. As a proof of concept, FPDI coupled with a mass spectrometer has also been applied for the discrimination of different brands of gasoline and determination of solid tablets and pesticides with limits of detection in the range of 2.2 to 30.7 ng mL^-1.

Micro-tapered aperture nebulization ionization for versatile mass spectrometry analysis

The bloom of new ionization sources is promoting the prosperity and application of mass spectrometry analysis. In this study, we introduced a new (high) voltage-free ionization method termed micro-tapered aperture nebulization ionization (MANI), which only requires the use of a common micro-tapered aperture atomizer to operate. It is found that liquid nebulization on this type of atomizer can induce ionization of the dissolved analytes in the droplets without the assistance of additional voltage and gas. By assembling the commercially available atomizer module into a 3D-printed chamber, a compact MANI source was constructed and then characterized. This source has a high ion yield and satisfactory quantitative performance, and it is preferably used to analyze aqueous solutions. Furthermore, it exhibits broad applicability and can be easily extended to multiple applications, including liquid extraction surface analysis of solid samples and direct analysis of gaseous analytes via secondary spray ionization. In short, the MANI source is a simple, safe, green, and versatile tool that can assist mass spectrometers to perform routine and diverse analysis.

Immunoaffinity Plastic Blade Spray Mass Spectrometry for Rapid Confirmatory Analysis of Food Contaminants

The lack of chromatographic separation in ambient and direct mass spectrometry (MS) ionization techniques jeopardizes the overall selectivity of the developed methods. Incorporating a biosensing element at the ionization source could compensate for that inherent lack of selectivity. Thus, a simplified immunoaffinity-direct MS technique was developed, immunoaffinity blade spray (iBS), featuring a conductive polystyrene blade material. In iBS, the generic coating used in conventional coated blade spray is replaced with a layer of highly specific monoclonal antibodies (mAbs), while the stainless steel is replaced with conductive polystyrene to allow for simple ELISA platelike hydrophobic immobilization of mAbs. Because of its high relevance for climate change-induced food safety issues, the mycotoxin deoxynivalenol (DON) was chosen as a model substance. Following a rapid extraction from wheat flour, DON is immuno-captured, and the blade is positioned in front of the MS for direct iBS-MS/MS analysis. The method's applicability was demonstrated by analyzing spiked and incurred wheat flour samples, omitting the need for time-consuming chromatographic separation. Apart from DON, cross-reacting DON conjugates could be successfully analyzed as well. The direct iBS-MS/MS method is generic and adaptable to detecting any analyte in sample extracts, provided that specific mAbs are available.

Rapid quantification of cannabinoids in beef tissues and bodily fluids using direct-delivery electrospray ionization mass spectrometry

Hempseed cake is a byproduct of hempseed oil extraction and is potentially a useful source of protein and fiber for use in ruminant diets. However, data are lacking on the appearance and/or clearance of cannabinoids in tissues of animals fed hempseed cake. To this end, a rapid method for quantifying cannabinol (CBN), cannabidiol (CBD), cannabinolic acid (CBNA), cannabidiolic acid (CBDA), cannabigerolic acid (CBGA), cannabichromenic acid (CBCA), cannabidivarin (CBDV), cannabidivarinic acid (CBDVA), tetrahydrocannabinol (THC) and tetrahydrocannabinolic acid (THCA) in cattle tissues, plasma, and urine was developed using rapid screen electrospray ionization mass spectrometry (RS-ESI-MS). Regression coefficients of matrix-matched standard curves ranged from 0.9946 to >0.9999 and analyte recoveries averaged from 90.2 ± 15.5 to 108.7 ± 18.7% across all compounds. Limits of detection and quantification ranged from 0.05 to 2.79 ng · mL^-1 and 0.17 to 9.30 ng · mL^-1, respectively, while the inter-day relative standard deviation ranged from 5.1 to 15.1%. Rapid screening electrospray ionization mass spectrometry (RS-ESI-MS) returned no false positives for any cannabinoid in plasma, urine, and tissue (liver, skeletal muscle) samples from 6 non-dosed control animals (n = 90 samples; of which 72 samples were plasma or urine and 18 samples were tissues). Across-animal cannabinoid concentrations measured in 32 plasma samples of cattle dosed with ground hemp were quantified by RS-ESI-MS; analytical results correlated well (r² = 0.963) with independent LC-MS/MS analysis of the same samples.

Rapid Quantification of Endogenous Steroids in Human Serum Using Leidenfrost Effect-Assisted Thermal Desorption Atmospheric Pressure Photoionization Orbitrap Mass Spectrometry

Unconjugated sex steroids in human serum play a crucial role in physiological and pathological studies and are frequently considered as biomarkers in clinical diagnosis. Because of their low polarity, poor volatility, and low concentration, the rapid and highly sensitive analysis of sex steroids in real serum matrix by ambient mass spectrometry is still challenging. Here, Leidenfrost effect-assisted thermal desorption atmospheric pressure photoionization orbitrap mass spectrometry (LETD-APPI-MS) was developed and applied to quantify free sex steroids in human serum without derivatization and chromatography separation within a few minutes. The concentration of target analyte could be increased by approximately two orders during the LETD process. The limit of quantifications and detections of endogenous sex steroids in human serum were measured at the ppt level. In contrast with commonly used immunoassays in clinical laboratories, LETD-APPI-MS enables the accurate measurements of multiple free sex steroids without the interference of cross-reactions. The endogenous sex steroids of 38 female serums at four physiological stages during pregnancy were rapidly tested by LETD-APPI-MS, whose results were highly consistent with that using liquid chromatography-atmospheric pressure chemical ionization mass spectrometry (LC-APCI-MS), indicating LETD-APPI-MS has a strong clinical application potential in steroid analysis.

An 241Am Plasma Desorption Ionization (AmDI) Source Scavenged from Smoke Detectors for Ambient Mass Spectrometry Sampling

The development of efficient, low-cost, easy-to-use ambient ionization methods has been a major goal of modern mass spectrometry. In this Letter, we present a gas-free, voltage-free, economic, and safe desorption ionization method using the plasma generated by a radioactive element, americium-241, scavenged from smoke detectors that equip almost every household. No other energy sources, such as laser, discharge, fast-moving carrier gas, solvent droplet, ultrasound, or heat are needed. We name this new method as americium-241 desorption ionization (AmDI). AmDI is tested for the detection of more than 20 volatile and nonvolatile chemicals under different sampling conditions, and the detection limit can be in the range of tens of picograms for some analytes. Mechanistically, we provide evidence that the α particles emitted from radioactive decay ionize ambient air, and the resulting plasma further energizes and ionizes the surface analytes for mass spectrometry detection. We anticipate wide applications of AmDI in mass spectrometric sampling in the near future because of the plethora of merits.

Polydopamine inner wall-coated hypodermic needle as microextraction device and electrospray emitter for the direct analysis of illicit drugs in oral fluid by ambient mass spectrometry

In this article, polydopamine inner wall-coated hypodermic needles (PDA-HNs) are evaluated as both microextraction devices and electrospray ionization (ESI) emitters for determining selected illicit drugs (methamphetamine, cocaine, and methadone) in oral fluid samples. The PDA film, located in the inner wall of the needle, allows the extraction of the analytes at alkaline pH, where their hydrophobic character is promoted. The extracted analytes are finally eluted in a methanol/formic acid mixture that also acts as ESI solution. For this purpose, a dedicated interface based on the connection of a PEEK tube with the needle hub is proposed. This assembly allows delivering the ESI solution by the infusion syringe pump of the mass spectrometer, providing an efficient ESI on the tip of the needle. The double use of the PDA-HNs as microextraction devices and ESI emitters permits the determination of the target analytes with limits of detection and precision (expressed as relative standard deviation) values better than 2.4 μg/L and 17.6%, respectively. The accuracy was evaluated by analyzing independent spiked oral fluid samples, obtaining good results.

Nebulization Swab Assisted Photoionization Tandem Miniaturized Ion Trap Mass Spectrometry for On-Site Analysis of Nonvolatile Compounds

Nonvolatile compounds usually have a high molecular weight and exhibit a high boiling point, which poses great challenges to the ionization method of MS. Ambient ionization sources can efficiently analyze the nonvolatile compounds without complex pretreatment, but they generally require special media such as heating devices, laser optical devices, or corona needles. Acoustic nebulization assisted photoionization (ANPI) is a potential method for the analysis of nonvolatile compounds that uses nebulization as a prerequisite for photoionization and introduces many advantages of PI, including excellent ionization efficiency, a high yield of molecular ions, and simplified spectrum interpretation. However, the ANPI source can be limited in on-site applications by the complexity of the analytical devices and the high cost of the nebulization chip. To address this issue, in this paper, we explored cheap and commercially piezoelectric materials used in a mist sprayer and fabricated a nebulization swab assisted photoionization (NSAP) as an ambient ionization source. Some useful results are presented: numerical simulation was introduced successfully for optimizing the aerosol distribution in the NSAP source; nonvolatile muscle relaxants, drugs of abuse, antibiotics, phthalates, and cholesterol were detected mostly as their protonated molecular ions while some special acetone/water cluster ions were detected. In addition, the LOD for most of the target analytes ranged from 10.0 to 50.0 pg with RSD ≤ 9%. Finally, this method is implemented for Chinese baijiu spiked with phthalates. The experimental data shows the capability of a NSAP source in high sensitivity and on-site analysis of the nonvolatile compounds.

Mass Spectrometry Imaging for Spatial Chemical Profiling of Vegetative Parts of Plants

The detection of chemical species and understanding their respective localisations in tissues have important implications in plant science. The conventional methods for imaging spatial localisation of chemical species are often restricted by the number of species that can be identified and is mostly done in a targeted manner. Mass spectrometry imaging combines the ability of traditional mass spectrometry to detect numerous chemical species in a sample with their spatial localisation information by analysing the specimen in a 2D manner. This article details the popular mass spectrometry imaging methodologies which are widely pursued along with their respective sample preparation and the data analysis methods that are commonly used. We also review the advancements through the years in the usage of the technique for the spatial profiling of endogenous metabolites, detection of xenobiotic agrochemicals and disease detection in plants. As an actively pursued area of research, we also address the hurdles in the analysis of plant tissues, the future scopes and an integrated approach to analyse samples combining different mass spectrometry imaging methods to obtain the most information from a sample of interest.

Characterization of Spray Modes and Factors Affecting the Ionization Efficiency of Paper Spray Ionization

In this study, we systematically evaluated the factors affecting the ionization efficiency of paper spray ionization (PSI), such as electric field, solvent supply rate, and paper thickness and hydrophobicity. The observed paper spray plume was classified into three modes: single cone-jet, multi-jet, and rim-jet modes. With the increase in the spraying voltage, the spray plume appeared in order of single cone-jet, multi-jet, and rim-jet modes. The rim-jet mode exhibited the lowest standard deviation and high ionization efficiency among the three spray modes. The main parameter determining the spray mode was the charge density of the droplets generated by paper spray, which depends on the electric field and solvent supply rate. A thicker paper reduced the electric repulsion between the jets and lowered the threshold voltage to reach the rim-jet mode. Lowering the solvent supply rate caused mode transitions from the single cone-jet to the rim-jet, possibly due to the increased droplet charge density. The hydrophobic modification on a paper substrate led to a different ionization mechanism or electrostatic spray ionization at low applied voltages.

Covalent organic framework-based solid phase microextraction coupled with electrospray ionization mass spectrometry for sensitive screening and quantitative evaluation of carbamazepine and its metabolite in mice

Carbamazepine (CBZ) and its metabolite carbamazepine-10,11-epoxide (CBZEP) play vital role in the treatment of epilepsy. It is of great importance to develop a method for rapid and sensitive monitoring of CBZ and CBZEP due to their narrow therapeutic index. Herein, an imine-linked-based covalent organic framework was synthesized by using 1,3,5-tris (4-aminophenyl) benzene (TPB) and 1,3,5-triformylbenzene (TFB) (denoted as TPB-TFB-COF)，and applied as a solid-phase microextraction (SPME) probe for extracting CBZ and CBZEP. The TPB-TFB-COF showed large surface areas (371 m² g^-1), high regular porosity (1.23 nm) and extraordinary stability, which rendered it an ideal adsorbent for highly efficient enrichment of CBZ and CBZEP. Accordingly, an attractive strategy of the combination of the TPB-TFB-COF-based SPME probe and electrospray ionization mass spectrometry system (ESI/MS) was proposed for rapid screening and sensitive monitoring of CBZ and CBZEP. Under the optimized parameters, the developed method exhibited good linearity for CBZ and CBZEP in the range of 4-1000 μg L^-1 with correlation coefficient (r) no less than 0.9953, and the corresponding limits of detection (LODs) were 0.4 and 2.5 μg L^-1, respectively. Moreover, high enrichment factors (EFs, 202-351 folds) and satisfactory relative standard deviations (RSDs) of one probe (3.3-5.1%) and probe-to-probe (4.8-5.6%) were obtained. By using the proposed method, sensitive screening and quantitative evaluation of CBZ and CBZEP in mice whole blood and tissue homogenates were successfully achieved, indicating the promising applicability of the TPB-TFB-COF-SPME-AMIS as a powerful tool for drug monitoring.

Routine analysis of pesticides in foodstuffs: Emerging ambient ionization mass spectrometry as an alternative strategy to be on your radar

Pesticides residues in foodstuffs are longstanding of great concern to consumers and governments, thus reliable evaluation techniques for these residues are necessary to ensure food safety. Emerging ambient ionization mass spectrometry (AIMS), a transformative technology in the field of analytical chemistry, is becoming a promising and solid evaluation technology due to its advantages of direct, real-time and in-situ ionization on samples without complex pretreatments. To provide useful guidance on the evaluation techniques in the field of food safety, we offered a comprehensive review on the AIMS technology and introduced their novel applications for the analysis of residual pesticides in foodstuffs under different testing scenarios (i.e., quantitative, screening, imaging, high-throughput detection and rapid on-site analysis). Meanwhile, the creative combination of AIMS with high-resolution mass analyzer (e.g., orbitrap and time-of-flight) was fundamentally mentioned based on recent studies about the detection and evaluation of multi-residual pesticides between 2015 and 2021. Finally, the technical challenges and prospects associated with AIMS operation in food industry were discussed.

Build, Share and Remix: 3D Printing for Speeding Up the Innovation Cycles in Ambient Ionisation Mass Spectrometry (AIMS)

Ambient ionisation mass spectrometry (AIMS) enables studying biological systems in their native state and direct high-throughput analyses. The ionisation occurs in the physical conditions of the surrounding environment. Simple spray or plasma-based AIMS devices allow the desorption and ionisation of molecules from solid, liquid and gaseous samples. 3D printing helps to implement new ideas and concepts in AIMS quickly. Here, we present examples of 3D printed AIMS sources and devices for ion transfer and manipulation. Further, we show the use of 3D printer parts for building custom AIMS sampling robots and imaging systems. Using 3D printing technology allows upgrading existing mass spectrometers with relatively low cost and effort.

Molecular differentiation of Panax notoginseng grown under different conditions by internal extractive electrospray ionization mass spectrometry and multivariate analysis

Panax notoginseng is a highly valuable and widely used herb in traditional Chinese medicine. The quality and efficacy of Panax notoginseng grown under different conditions can greatly vary due to the differences in chemical composition. The analysis of chemical composition in Panax notoginseng typically involves various experimental steps including extraction, chromatographic separation and characterization, which can be time- and labor-consuming. Therefore, the efficient quality assessment and control of Panax notoginseng requires the development of more rapid methods for the chemical characterization and classification of Panax notoginseng. In this study, a method based on internal extractive electrospray ionization mass spectrometry (iEESI-MS) was developed to characterize chemical components of Panax notoginseng samples under different growth conditions (e.g., place of origin, soil quality, growth season) at the speed of 0.5 min per sample, without sample pretreatment and chromatographic separation. A total of 35 chemical components, including sugars, saponins, organic acids, etc., were identified in Panax notoginseng samples. Clear separation was observed in the multivariate analysis of the iEESI-MS data from Panax notoginseng samples grown under different conditions. The difference in the content of sucrose, fructose, Rg1, Rf, Rb1, Noto-R1, malonyl-Rb1, malonyl-Rg1, malonyl-Rf, Rd, Re, linoleic acid, palmitic acid and malic acid can be used as key characteristic indicators to discriminate origin, commercial specifications, and cultivation conditions of Panax notoginseng samples. The results of our study indicate the high power of iEESI-MS for the rapid molecular characterization and classification of Panax notoginseng under different growth conditions, which can be used for the quality assessment of traditional herbal medicines as well as in pharmaceutical and clinical analysis.

Rapid analysis of quinones in complex matrices by derivatization-based wooden-tip electrospray ionization mass spectrometry

Quinones are important components participating in various biological processes as well as hazardous substances to human health. Rapid determination of quinones in environmental samples and biofluids is the basis for assessing their health effect. Here, we presented a rapid, straightforward, highly sensitive and environmental-friendly wooden-tip electrospray ionization mass spectrometry (ESI-MS) method for the determination of quinones in PM2.5, urine and serum. An amine group "tag" was introduced to the quinone structure through in situ derivatization with cysteamine to improve ionization efficiency of quinones in wooden-tip ESI-MS. The toothpicks were treated by sharpening and acidification with HNO₃. Experimental parameters, including sample volume, spray voltage, and spray solvent composition were optimized to be 1 μL, 3.5 kV, and ACN/CH₃COOC₂H₅ (v/v, 9:1), respectively. The limits of detection for the determination of 1,4-benzoquinone, methyl-p-benzoquinone, 1,4-naphthoquinone and 1,4-anthraquinone in ACN under the optimal conditions were 1.00, 0.96, 0.13, 0.16 ng (1.00, 0.96, 0.13, 0.16 μg/mL, sample volume, 1 μL), respectively. This approach was successfully applied to the determination of 1,4-naphthoquinone and 1,4-anthraquinone in complex matrices, including PM2.5, urine and serum without or with minimal sample preparation (LOD range: 0.22-1.48 ng).

Thermal desorption bridged the gap between dielectric barrier discharge ionization and dried plasma spot samples for sensitive and rapid detection of fentanyl analogs in mass spectrometry

Guided by finite element simulations and 3D-printing, we constructed a semi-covered flat-TD surface for sufficient thermal desorption and ionization of fentanyl analogs from dried plasma/blood spot samples.

Sensitive Quantification of MicroRNA in Blood through Multi-amplification Toehold-Mediated DNA-Strand-Displacement Paper-Spray Mass Spectrometry (TSD-PS MS)

Accurate quantification of disease-signature microRNAs (miRNAs) in biomedical samples is in high demand for clinical diagnosis but still challenging because of low miRNAs abundance and complicating interferences in the milieus. Here, we report a multi-amplification strategy for blood miRNAs analysis based on paper-spray mass spectrometry (PS MS). A toehold-mediated DNA-strand-displacement reaction (TSD) is employed to amplify the signal chain and to ensure the specificity. The signal chain is then cleaved by UV to release signal molecules for detection. Moreover, paper spray can efficiently filter out the interfering substances in blood and further enhances the detecting sensitivity. This concept is successfully demonstrated in the prototype detection of a cancer biomarker miRNA-141 in blood and serum. The proposed TSD-PS MS approach provides an efficient way for sensitive detection of oligonucleotides with low concentration in complicating milieus.

Recent Advances of Ambient Mass Spectrometry Imaging and Its Applications in Lipid and Metabolite Analysis

Ambient mass spectrometry imaging (AMSI) has attracted much attention in recent years. As a kind of unlabeled molecular imaging technique, AMSI can enable in situ visualization of a large number of compounds in biological tissue sections in ambient conditions. In this review, the developments of various AMSI techniques are discussed according to one-step and two-step ionization strategies. In addition, recent applications of AMSI for lipid and metabolite analysis (from 2016 to 2021) in disease diagnosis, animal model research, plant science, drug metabolism and toxicology research, etc., are summarized. Finally, further perspectives of AMSI in spatial resolution, sensitivity, quantitative ability, convenience and software development are proposed.

FIA-HRMS fingerprinting subjected to chemometrics as a valuable tool to address food classification and authentication: Application to red wine, paprika, and vegetable oil samples

The rise of food fraud practices, affecting a wide variety of goods and their specific characteristics (e.g., quality or geographical origin), demands rapid high-throughput analytical approaches to ensure consumers protection. In this context, this study assesses flow injection analysis coupled to high-resolution mass spectrometry (FIA-HRMS), using a fingerprinting approach and combined with chemometrics, to address four food authentication issues: (i) the geographical origin of three Spanish red wines, (ii) the geographical origin of three European paprikas, (iii) the distinction of olive oil from other vegetable oils and (iv) the assessment of its quality category. In each case, negative and positive ionisation FIA-HRMS fingerprints, and two different data fusion strategies, were evaluated. After external validation, excellent classification accuracies were reached. Moreover, high-resolution mass spectrometry (HRMS) allowed sample matrices characterisation by the putative identification of the most common ions.

Rapid Analysis of Trace Phthalates by Spray-Inlet Microwave Plasma Torch Ionization-Tandem Mass Spectrometry in Commercial Perfumes

BACKGROUND

The less volatile fraction of perfumes can be easily contaminated by phthalates esters (PAEs) which are endocrine-disrupting chemicals during the production, bottling and transportation processes. It is necessary to establish an innovative and rapid method to determine the trace PAEs in commercial perfumes.

OBJECTIVE

Hence, self-built spray-inlet microwave plasma torch ionization coupled with a quadrupole time-of-flight tandem mass spectrometer (QTOF-MS) was developed for direct analysis of PAEs in perfumes with no sample pretreatment.

METHODS

Perfumes were sprayed to the MPT's flame directly by sampling pump in 10 µL/min and the ions produced by MPT were introduced into QTOF-MS, the MPT worked at 2450 MHz and 40 W in the 800 ml/min flow rate of argon.

RESULTS

For the developed method, excellent linearities were obtained and the correlation coefficient of Di-n-pentyl Phthalate was 0.9799 and the rest were larger than 0.99. The LODs and LOQs were obtained in the ranges of 1.452-18.96 ng/g and 4.839-63.19 ng/g, respectively. The spiked recoveries of PAEs were in the range of 100.1-105.2% with satisfied intra-day RSDs and inter-day RSDs ranging from 1.51-4.34% and 3.45-5.65%, respectively. PAEs in commercial perfumes were successfully detected by spray-inlet MPT-MS2 with low concentrations from 0.036-1.352 µg/g.

CONCLUSIONS

The method is a promising tool in field analysis of PAEs in cosmetic solutions where rapid qualitative and quantitative analysis in needed.

HIGHLIGHTS

The method was satisfactorily applied to the analysis of commercial perfume samples within 30 s, and earned merits such as simplicity, sensitivity, environmental friendliness and ease operation.