Enzyme Catalyzed Hydrogel as Versatile Bioadhesive for Tissue Wound Hemostasis, Bonding, and Continuous Repair

DOTAGEL: a hydrogen and amide bonded, gelatin based, tunable, antibacterial, and high strength adhesive synthesized in an unoxidized environment

The development of bioadhesives that concurrently exhibit high adhesion strength, biocompatibility, and tunable properties and involve simple fabrication processes continues to be a significant challenge. In this study, a novel bioadhesive named DOTAGEL is synthesized by crosslinking gelatin (GA), dopamine (DA), and tannic acid (TA) in an unoxidized environment due to the advantage of controlling the degree of protonation in GA and TA, as well as controlling the degree of intermolecular amide and hydrogen bonding in the acidic medium. DOTAGEL (DA + TA + GA) shows superior adhesion strengths of 104.6 ± 46 kPa on dry skin and 35.6 ± 4.5 kPa on wet skin, up to 13 attachment-detachment cycles, retains adhesion strength under water for up to 10 days and is capable of joining two cut parts of internal organs of mice. Moreover, DOTAGEL shows strong antibacterial properties, self-healing, and biocompatibility since it contains TA, a natural and antibacterial cross-linker with abundant hydroxyl groups and the capability of forming non-covalent bonds in an unoxidized environment, and dopamine hydrochloride, a mussel inspired biomaterial containing both the amine and catechol groups for amide bonding and hydrogen bonding with TA and GA. The cross-linking among 20% (w/v) GA, 0.2% (w/v) DA, and 20% (w/v) TA is done by the centrifugation process at room temperature. Two different acids, hydrochloric acid and acetic acid, were used for tuning the pH of the medium, which led to two different samples named DOTAGEL/AA and DOTAGEL/HCL. The degree of cross-linking and mechanical and biochemical properties, like adhesion strength, degradation rate, antibacterial properties, stickiness, etc., are tuned by adjusting the pH of the medium. DOTAGEL/HCL showed 6.5 times faster degradation in 10 days, a faster release rate in the antibacterial study, 2 times adhesion strength in a dry medium, and more stickiness. The novelty lies not only in increased adhesion strength but also in the single-step fabrication process of the adhesive in the acidic medium. This research proposes the formation of a tunable antibacterial adhesive that is capable of working on wet surfaces within the body and that has the potential to become a successful tissue adhesive with a wide range of possibilities in controlled drug delivery at wound sites and other biomedical applications.

External Bleeding and Advanced Biomacromolecules for Hemostasis

Hemorrhage is a significant medical problem that has been an active area of research over the past few decades. The human body has a complex response to bleeding that leads to blood clot formation and hemostasis. Many biomaterials based on various biomacromolecules have been developed to either accelerate or improve the body's natural response to bleeding. This review examines the mechanisms of hemostasis, types of bleeding, and the in vitro or in vivo models and techniques used to study bleeding and hemostatic materials. It provides a detailed overview of the diverse hemostatic materials, including those that are highly absorbent, wet adhesives, and those that accelerate the biochemical cascade of blood clotting. These materials are currently marketed, under preclinical testing, or being researched. In exploring the latest advancements in hemostatic technologies, this paper highlights the potential of these materials to significantly improve bleeding control in clinical and emergency situations.

A Hierarchical Hydrogel Impregnation Strategy Enables Brittle-Failure-Free 3D-Printed Bioceramic Scaffolds

3D-printed bioceramic scaffolds offer great potential for bone tissue engineering (BTE) but their inherent brittleness and reduced mechanical properties at high porosities can easily result in catastrophic fractures. Herein, this study presents a hierarchical hydrogel impregnation strategy, incorporating poly(vinyl alcohol) (PVA) hydrogel into the macro- and micropores of bioceramic scaffolds and synergistically reinforcing it via freeze-casting assisted solution substitution (FASS) in a tannic acid (TA)-glycerol solution. By effectively mitigating catastrophic brittle failures, the hydrogel-impregnated scaffolds showcase three- and 100-fold enhancement in mechanical energy absorption under compression (5.05 MJ m-3) and three-point bending (3.82 MJ m-3), respectively. The reinforcement mechanisms are further investigated by experimental and simulation analyses, revealing a multi-scale synergy of fracture and fragmentation resistance through macro and micro-scale fiber bridging, and nano and molecular-scale hydrogel reinforcement. Also, the scaffolds acquire additional antibacterial and drug-loading capabilities from the hydrogel phase while maintaining favorable cell biocompatibility. Therefore, this study demonstrates a facile yet effective approach for preparing brittle-failure-free bioceramic scaffolds with enhanced biological functionalities, showcasing immense potential for BTE applications.

Novel Biomaterials for Wound Healing and Tissue Regeneration

Skin is the first defense barrier of the human body, which can resist the invasion of external dust, microorganisms and other pollutants, and ensure that the human body maintains the homeostasis of the internal environment. Once the skin is damaged, the health threat to the human body will increase. Wound repair and the human internal environment are a dynamic process. How to effectively accelerate the healing of wounds without affecting the internal environment of the human body and guarantee that the repaired tissue retains its original function as much as possible has become a research hotspot. With the advancement of technology, researchers have combined new technologies to develop and prepare various types of materials for wound healing. This article will introduce the wound repair materials developed and prepared in recent years from three types: nanofibers, composite hydrogels, and other new materials. The paper aims to provide reference for researchers in related fields to develop and prepare multifunctional materials. This may be helpful to design more ideal materials for clinical application, and then achieve better wound healing and regeneration effects.

Biodegradable Plant Oil-Based Bioadhesive with Ultrastrong Wet-Tissue Adhesion for Instant Sealing Hemostasis

The key to saving lives is to achieve instant and effective sealing hemostasis in the event of emergency bleeding. Herein, a plant oil-based EMTA/Zn2+ bioadhesive is prepared by a facile reaction of epoxidized soybean oil (ESO) with methacrylic acid (MAA) and tannic acid (TA), followed by the addition of zinc ions for coordination with TA. The EMTA/Zn2+ bioadhesive can be rapidly cured in situ at the wound site through photo-cross-linking under ultraviolet (UV) light-emitting diode (LED) irradiation within 30 s, achieving ultrastrong wet-tissue adhesion performance of 92.4 and 51.8 kPa to porcine skin and aortic skin after 7 days underwater, respectively. Especially, the EMTA/Zn2+ bioadhesive exhibits outstanding sealing performance in vitro with the high burst pressure of 525 mmHg (70 kPa) and 337.5 mmHg (45 kPa) to porcine skin and aortic skin, respectively. Moreover, the EMTA/Zn2+ bioadhesive not only has outstanding hemocompatibility and good biodegradability but also exhibits excellent cytocompatibility and antibacterial properties. Notably, the EMTA/Zn2+ bioadhesive has remarkable instant sealing hemostatic ability for hemorrhaging liver in vivo. Therefore, the prepared plant oil-based EMTA/Zn2+ bioadhesive can serve as a charming alternative candidate for instant sealing hemostasis in clinical applications, especially in traumatic internal organs and arterial bleeding.

Self-healing, antioxidant, and antibacterial Bletilla striata polysaccharide-tannic acid dual dynamic crosslinked hydrogels for tissue adhesion and rapid hemostasis

Biomaterials capable of achieving effective sealing and hemostasis at moist wounds are in high demand in the clinical management of acute hemorrhage. Bletilla striata polysaccharide (BSP), a natural polysaccharide renowned for its hemostatic properties, holds promising applications in biomedical fields. In this study, a dual-dynamic-bonds crosslinked hydrogel was synthesized via a facile one-pot method utilizing poly(vinyl alcohol) (PVA)-borax as a matrix system, followed by the incorporation of BSP and tannic acid (TA). Chemical borate ester bonds formed around borax, coupled with multiple physical hydrogen bonds between BSP and other components, enhanced the mechanical properties and rapid self-healing capabilities. The catechol moieties in TA endowed the hydrogel with excellent adhesive strength of 30.2 kPa on the surface of wet tissues and facilitated easy removal without residue. Benefiting from the synergistic effect of TA and the preservation of the intrinsic properties of BSP, the hydrogel exhibited outstanding biocompatibility, antibacterial, and antioxidant properties. Moreover, it effectively halted acute bleeding within 31.3 s, resulting in blood loss of 15.6 % of that of the untreated group. As a superior hemostatic adhesive, the hydrogel in this study is poised to offer a novel solution for addressing future acute hemorrhage, wound healing, and other biomedical applications.

Multifunctional Self-Healing Carbon Dot-Gelatin Bioadhesive: Improved Tissue Adhesion with Simultaneous Drug Delivery, Optical Tracking, and Photoactivated Sterilization

Bioadhesives with all-inclusive properties for simultaneous strong and robust adhesion, cohesion, tracking, drug delivery, self-sterilization, and nontoxicity are still farfetched. Herein, a carbon dot (CD) is made to infuse each of the above-desired aspects with gelatin, an inexpensive edible protein. The CD derived through controlled hydrothermal pyrolysis of dopamine and terephthaldehyde retained -NH2, -OH, -COOH, and, most importantly, -CHO functionality on the CD surface for efficient skin adhesion and cross-linking. Facile fabrication of CD-gelatin bioadhesive through covalent conjugation of -CHO of the CD with -NH2 of gelatin through Schiff base formation was accomplished. This imparts remarkable self-healing attributes as well as excellent adhesion and cohesion evident from physicomechanical analysis in a porcine skin model. Improved porosity of the bioadhesive allows loading hemin as a model drug whose disembarkment is tracked with intrinsic CD photoluminescence. In a significant achievement, antibiotic-free self-sterilization of bioadhesive is demonstrated through visible light (white LED, 23 W)-irradiated photosensitization of the CD to produce reactive oxygen species for annihilation of both Gram-positive and Gram-negative bacteria with exceptional efficacy (99.9%). Thus, a comprehensive CD-gelatin bioadhesive for superficial and localized wound management is reported as a promising step for the transformation of the bioadhesive domain through controlled nanotization for futuristic clinical translations.

Gelatin-based biomaterials and gelatin as an additive for chronic wound repair

Disturbing or disrupting the regular healing process of a skin wound may result in its progression to a chronic state. Chronic wounds often lead to increased infection because of their long healing time, malnutrition, and insufficient oxygen flow, subsequently affecting wound progression. Gelatin-the main structure of natural collagen-is widely used in biomedical fields because of its low cost, wide availability, biocompatibility, and degradability. However, gelatin may exhibit diverse tailored physical properties and poor antibacterial activity. Research on gelatin-based biomaterials has identified the challenges of improving gelatin's poor antibacterial properties and low mechanical properties. In chronic wounds, gelatin-based biomaterials can promote wound hemostasis, enhance peri-wound antibacterial and anti-inflammatory properties, and promote vascular and epithelial cell regeneration. In this article, we first introduce the natural process of wound healing. Second, we present the role of gelatin-based biomaterials and gelatin as an additive in wound healing. Finally, we present the future implications of gelatin-based biomaterials.

The Combination of Bioactive Herbal Compounds with Biomaterials for Regenerative Medicine

Regenerative medicine aims to restore the function of diseased or damaged tissues and organs by cell therapy, gene therapy, and tissue engineering, along with the adjunctive application of bioactive molecules. Traditional bioactive molecules, such as growth factors and cytokines, have shown great potential in the regulation of cellular and tissue behavior, but have the disadvantages of limited source, high cost, short half-life, and side effects. In recent years, herbal compounds extracted from natural plants/herbs have gained increasing attention. This is not only because herbal compounds are easily obtained, inexpensive, mostly safe, and reliable, but also owing to their excellent effects, including anti-inflammatory, antibacterial, antioxidative, proangiogenic behavior and ability to promote stem cell differentiation. Such effects also play important roles in the processes related to tissue regeneration. Furthermore, the moieties of the herbal compounds can form physical or chemical bonds with the scaffolds, which contributes to improved mechanical strength and stability of the scaffolds. Thus, the incorporation of herbal compounds as bioactive molecules in biomaterials is a promising direction for future regenerative medicine applications. Herein, an overview on the use of bioactive herbal compounds combined with different biomaterial scaffolds for regenerative medicine application is presented. We first introduce the classification, structures, and properties of different herbal bioactive components and then provide a comprehensive survey on the use of bioactive herbal compounds to engineer scaffolds for tissue repair/regeneration of skin, cartilage, bone, neural, and heart tissues. Finally, we highlight the challenges and prospects for the future development of herbal scaffolds toward clinical translation. Overall, it is believed that the combination of bioactive herbal compounds with biomaterials could be a promising perspective for the next generation of regenerative medicine.

Stimuli-Responsive Hydrogel Adhesives for Wound Closure and Tissue Regeneration

Sutures and staplers, as gold standards for clinical wound closure, usually cause secondary tissue injury and require professional technicians and equipment. The noninvasive hydrogel adhesives are used in various biomedical applications, such as wound closure, tissue sealing, and tissue regeneration, due to their remarkable properties. Recently-developed hydrogel adhesives, especially stimuli-responsive hydrogels, have shown great potential owing to their advantages in regulating their performance and functions according to the wound situations or external conditions, thus allowing the wounds to heal gradually. However, comprehensive summary on stimuli-responsive hydrogels as tissue adhesives is rarely reported to date. This review focuses on the advances in the design of various stimuli-responsive hydrogel adhesives over the past decade, including the systems responsive to pH, temperature, photo, and enzymes. Their potential biomedical applications, such as skin closure, cardiovascular and liver hemostasis, and gastrointestinal sealing, are emphasized. Meanwhile, the challenges and future development of stimuli-responsive hydrogel adhesives are discussed. This review aims to provide meaningful insights for the further design of next-generation of hydrogel adhesives for wound closure and tissue regeneration.

Bioadhesives with Antimicrobial Properties

Bioadhesives with antimicrobial properties enable easier and safer treatment of wounds as compared to the traditional methods such as suturing and stapling. Composed of natural or synthetic polymers, these bioadhesives seal wounds and facilitate healing while preventing infections through the activity of locally released antimicrobial drugs, nanocomponents, or inherently antimicrobial polers. Although many different materials and strategies are employed to develop antimicrobial bioadhesives, the design of these biomaterials necessitates a prudent approach as achieving all the required properties including optimal adhesive and cohesive properties, biocompatibility, and antimicrobial activity can be challenging. Designing antimicrobial bioadhesives with tunable physical, chemical, and biological properties will shed light on the path for future advancement of bioadhesives with antimicrobial properties. In this review, the requirements and commonly used strategies for developing bioadhesives with antimicrobial properties are discussed. In particular, different methods for their synthesis and their experimental and clinical applications on a variety of organs are reviewed. Advances in the design of bioadhesives with antimicrobial properties will pave the way for a better management of wounds to increase positive clinical outcomes.

A Natural Self-Assembled Gel-Sponge with Hierarchical Porous Structure for Rapid Hemostasis and Antibacterial

Developing hemostatic agents with reliable biosafety and high efficiency has paramount clinical significance for saving lives. Herein, inspired from traditional Chinese medicine, a sponge (BC-S) with hierarchical porous structure is proposed for the treatment of bleeding. The BC-S is prepared by a simple self-assembly method employing Bletilla Striata polysaccharide and quaternary amine alkaloids (QA) from Bletilla Striata and Coptidis Rhizoma. The ideal cation donor encapsulated in the helical structure of BSP enlarges the inter-layer space of sponge by the action of electrostatic repulsion, forming wider channels which can accelerate the diversion speed of absorbed blood. Then, platelets and erythrocytes are trapped tightly in the reticular structure and extruded to deformation, activation. Subsequently, fibrin network forms and reinforces the internal multilayer mesh, blocks the outflow of blood. QA is released from the sponge skeleton mainly driven by a combination of surface erosion and potentially solution diffusion among pore to provide long-term antibacterial activity. Benefiting from the well-designed structure and the effective hemostatic mechanism, the BC-S displays more excellent hemostatic performance in different models in vivo and in vitro compared with typical gelatin hemostatic sponge. This work is expected to boost the development of emerging hemostatic agents.

Bioadhesive and Injectable Hydrogels and Their Correlation with Mesenchymal Stem Cells Differentiation for Cartilage Repair: A Mini-Review

Injectable bioadhesive hydrogels, known for their capacity to carry substances and adaptability in processing, offer great potential across various biomedical applications. They are especially promising in minimally invasive stem cell-based therapies for treating cartilage damage. This approach harnesses readily available mesenchymal stem cells (MSCs) to differentiate into chondrocytes for cartilage regeneration. In this review, we investigate the relationship between bioadhesion and MSC differentiation. We summarize the fundamental principles of bioadhesion and discuss recent trends in bioadhesive hydrogels. Furthermore, we highlight their specific applications in conjunction with stem cells, particularly in the context of cartilage repair. The review also encompasses a discussion on testing methods for bioadhesive hydrogels and direct techniques for differentiating MSCs into hyaline cartilage chondrocytes. These approaches are explored within both clinical and laboratory settings, including the use of genetic tools. While this review offers valuable insights into the interconnected aspects of these topics, it underscores the need for further research to fully grasp the complexities of their relationship.

Photocuring and Gelatin-Based Antibacterial Hydrogel for Skin Care

The development of moisturizing, antibacterial, and biocompatible multifunctional hydrogels is essential to protect skin and promote skin defects recovery. Gelatin has admired potential to be applied for skin care as a hydrogel in virtue of its hydrophilic biocompatible and biodegradable properties. In this study, triclosan-grafted gelatin and photo-cross-linkable methacrylated gelatin were synthesized and then combined to construct the semi-interpenetrating network and antibacterial hydrogels with the aid of a visible blue light. The antimicrobial test demonstrated that the resulting hydrogel obtained excellent inactivation capacity against E. coli, S. aureus, T. rubrum, and C. albicans with sterilizing rates of 99.998%, 99.998%, 99.19%, and 99.64%, respectively. In addition, the cytotoxicity, hemolysis, skin irritation, and rat skin wound healing experiments proved the good biocompatibility of the hydrogel. Therefore, this investigation sheds light on the development of multifunctional hydrogels in skin care.

Preparation and Hemostatic Effect of Micro-Nanograded Porous Particles Doped with Dopamine-Based Water-Triggered Intelligent Composite Adhesives

The wet environment of water or tissue in bleeding wounds poses significant challenges to the adhesion performance of existing hemostatic adhesives. An intelligent composite adhesive prepared by doping starch-based silicate micro-nanograded porous particles (MBC@CMS) with dopamine-hyperbranched polymers (HPD, 7800 Mw) synthesized by the Michael addition reaction could be triggered by water to form a glue (MBC@CMS-HPD). The results indicated that MBC@CMS-HPD could still have adhesion properties under running water washing and water immersion and could effectively seal the water outlet. The results of the glue-forming mechanism showed that MBC@CMS-HPD had better wettability than water, which could eliminate water molecules at the wet adhesive surface. When contacted with water, the agglomeration of the HPD hydrophobic chain increases the exposure of the catechol group, and the relative atomic mass of the N element on the surface increases from 2.8 to 4.8%. The adhesion of MBC@CMS-HPD was enhanced and stable. MBC@CMS-HPD showed significant hemostasis effects in five injury bleeding models of Sprague-Dawley (SD) rats and New Zealand rabbits. Especially in the fatal femoral artery bleeding model of New Zealand rabbits, MBC@CMS-HPD reduced the amount of bleeding by 75% and shortened the bleeding time by 78% compared with the a-cyanoacrylate adhesives. The results of the coagulation mechanism showed that compared with HPD, MBC@CMS-HPD could activate both endogenous and exogenous coagulation pathways. Among them, after contact with blood, HPD formed a gel to close the blood outlet, and MBC@CMS entered the wound to activate the internal and external coagulation pathways. In addition, HPD and MBC@CMS had good histocompatibility and degradability, which has the potential to be applied to different wounds.

Concentration Selection of Biofriendly Enzyme-Modified Gelatin Hydrogels for Periodontal Bone Regeneration

Periodontitis is challenging to cure radically due to its complex periodontal structure and particular microenvironment of dysbiosis and inflammation. However, with the assistance of various materials, cell osteogenic differentiation could be improved, and the ability of hard tissue regeneration could be enhanced. This study aimed to explore the appropriate concentration ratio of biofriendly transglutaminase-modified gelatin hydrogels for promoting periodontal alveolar bone regeneration. Through a series of characterization and cell experiments, we found that all the hydrogels possessed multi-space network structures and demonstrated their biocompatibility. In vivo and in vitro osteogenic differentiation experiments also confirmed that the group 40-5 (transglutaminase-gelatin concentration ratio) possessed a favorable osteogenic potential. In summary, we conclude that such hydrogel with a 40-5 concentration is most conducive to promoting periodontal bone reconstruction, which might be a new route to deal with the dilemma of clinical periodontal treatment.

Abundant tannic acid modified gelatin/sodium alginate biocomposite hydrogels with high toughness, antifreezing, antioxidant and antibacterial properties

The acidity of high tannic acid (TA) content solution can destroy the structure of protein, such as gelatin (G). This causes a big challenge to introduce abundant TA into the G-based hydrogels. Here, the G-based hydrogel system with abundant TA as hydrogen bonds provider was constructed by a "protective film" strategy. The protective film around the composite hydrogel was first formed by the chelation of sodium alginate (SA) and Ca2+. Subsequently, abundant TA and Ca2+ were successively introduced into the hydrogel system by immersing method. This strategy effectively protected the structure of the designed hydrogel. After treatment with 0.3 w/v TA and 0.06 w/v Ca2+ solutions, the tensile modulus, elongation at break and toughness of G/SA hydrogel increased about 4-, 2-, and 6-fold, respectively. Besides, G/SA-TA/Ca2+ hydrogels exhibited good water retention, anti-freezing, antioxidant, antibacterial properties and low hemolysis ratio. Cell experiments showed that G/SA-TA/Ca2+ hydrogels possessed good biocompatibility and could promote cell migration. Therefore, G/SA-TA/Ca2+ hydrogels are expected to be used in the field of biomedical engineering. The strategy proposed in this work also provides a new idea for improving the properties of other protein-based hydrogels.

Dual-light defined in situ oral mucosal lesion therapy through a mode switchable anti-bacterial and anti-inflammatory mucoadhesive hydrogel

Oral mucosal ulcer is the most prevalent oral mucosal lesion, affecting the quality of life. Due to the moist and highly dynamic oral lining, the existing oral mucoadhesives are unable to serially address the challenges of residency, hemorrhage, bacterial infection and inflammatory reaction. Herein, a dual-light defined oral mucoadhesive (ZPTA-G/HMA) was proposed, with a methacrylate gelatin-methacrylate hyaluronic acid (GelMA-HAMA, G/HMA) double network hydrogel as a matrix, tannic acid (TA) as a high content anchor moiety provider for the moist oral mucosa, and polydopamine modified zinc oxide (ZnO@PDA, ZP) as a photocatalytic antibacterial substance. This platform had good adhesive and hemostatic properties both in vitro and in vivo. Under 520 nm green light (GL) irradiation, ZPTA-G/HMA would anchor to the wet mucosa surface by crosslinking and exert broad-spectrum antibacterial ability (even including Candida albicans) by in situ producing reactive oxygen species (ROS). Moreover, under 808 nm near-infrared (NIR) irradiation, the increased release of TA combined with the photothermal effect of ZP endowed ZPTA-G/HMA with enhanced anti-inflammatory and pro-healing performance. Collectively, ZPTA-G/HMA could be switched by light sources to achieve the dual-mode real-time adjustment of in situ anti-bacterial function and controlled anti-inflammation, combined with ideal mucosal residence, thus promising in developing personalized sequential strategies for varied oral mucosal lesions.

Natural Small Biological Molecule Based Supramolecular Bioadhesives with Innate Photothermal Antibacterial Capability for Nonpressing Hemostasis and Effective Wound Healing

Bioadhesives with immediate wound closure, efficient hemostasis, and antibacterial properties that can well integrate with tissue are urgently needed in wound management. Natural small biological molecule based bioadhesives hold great promise for manipulating wound healing by taking advantage of integrated functionalities, synthetic simplification, and accuracy, cost efficiency and biosafety. Herein, a natural small biological molecule based bioadhesive, composed of natural small biological molecules (α-lipoic acid and tannic acid) and a small amount of ferric chloride, was prepared via an extremely simple and green route for wound management. In this system, covalent and noncovalent interactions between each component resulted in the self-healing supramolecular bioadhesive. It possessed appropriate wet-tissue adhesion, efficient nonpressing hemostasis and free radical scavenging abilities. More importantly, the interaction between tannic acid and Fe³⁺ endowed the bioadhesive with innate and steady photothermal activity, which showed excellent photothermal bactericidal activity to both E. coli and S. aureus. The bioadhesive promoted wound healing for linear and circular wounds in vivo, especially for infectious wounds under near-infrared (NIR) irradiation. This bioadhesive will have promising value as a safe and effective antimicrobial adhesive for infectious wound management.

Multifunctional chitosan/silver/tannic acid cryogels for hemostasis and wound healing

Wound dressing is a kind of significant artificial materials for protecting injured tissues and promoting wound healing. However, fabrication of antibacterial wound dressing usually involves tedious procedures and toxic components. Herein, we demonstrate a multifunctional chitosan/silver/tannic acid (CS/Ag/TA) cryogel based on an economic method to block acute hemorrhage and promote wound healing. The prepared CS/Ag/TA cryogel not only performs steady stability and compressibility, but also shows good antibacterial ability for both S. aureus and E. coli. Attributing to TA molecules, the CS/Ag/TA cryogel can effectively scavenge more than 95% of free radicals, showing effective oxidation resistance. Due to the porous structure and positive charge of CS, the prepared cryogel exhibits good hemostatic capability with a hemostasis time less than 20 s. Benefitting from the good biocompatibility and cell proliferation, the CS/Ag/TA cryogel can significantly promote wound repair in the skin incision model. All the results indicated that the greenly fabricated cryogel can be widely applied in clinic for hemostasis and wound healing.

A silk fibroin based bioadhesive with synergistic photothermal-reinforced antibacterial activity

Bioadhesives have gained considerable popularity for application in wound closure. However, applying bioadhesives incurs risks associated with bacterial infection during wound healing. Hence, in this study, a silk fibroin based bioadhesive was constructed via employing natural macromolecule, silk fibroin (SF), to spontaneously coassemble with natural plant polyphenol, tannic acid (TA), and iron oxide nanoparticles (Fe₃O₄ NPs). In the system, the natural macromolecule SF plays a key role in fabricating the macromolecular network matrix due to the change of the secondary structure of SF (from random coil to β-sheet) under the trigger of TA. Importantly, the strong hydrogen bonding interactions between SF and TA, and the coordination bonds between TA and Fe₃O₄ NPs endow the bioadhesive with high extensibility, self-healing properties, and considerable wet adhesion. Meanwhile, the synergy between the inherent photothermal properties of Fe₃O₄ NPs and TA/Fe³⁺ complexes under near-infrared (NIR) radiation enables the bioadhesive superior photothermal-reinforced antibacterial activity. The multifunctional natural macromolecule bioadhesive is a potential candidate in clinical wound management for improved outcomes, especially in infected wounds.

Transglutaminase-Catalyzed Bottom-Up Synthesis of Polymer Hydrogel

Enzyme catalysis has attracted increasing attention for application in the synthesis of polymer hydrogel due to the eco-friendly process and the devisable catalytic reaction. Moreover, bottom-up approaches combining enzyme catalysts and molecular self-assembly have been explored for synthesizing hydrogel with complex architectures. An enzyme widely distributed in nature, transglutaminase (TGase) has been confirmed to catalyze the formation of isopeptide bonds between proteins, which can effectively improve the gelation of proteins. In this mini-review, TGase-catalyzed synthesis of polymer hydrogels, including fibrin hydrogels, polyethylene glycol hydrogels, soy protein hydrogels, collagen hydrogels, gelatin hydrogels and hyaluronan hydrogels, has been reviewed in detail. The catalytic process and gel formation mechanism by TGase have also been considered. Furthermore, future perspectives and challenges in the preparation of polymer hydrogels by TGase are also highlighted.

Bio-inspired, bio-degradable adenosine 5′-diphosphate-modified hyaluronic acid coordinated hydrophobic undecanal-modified chitosan for hemostasis and wound healing

Uncontrolled hemorrhage and wound infection are crucial causes of trauma-associated death in both the military and the clinic. Therefore, developing an efficient and rapid hemostatic method with biocompatibility, easy degradation, and wound healing is of great importance and desirability. Inspired by spontaneous blood cell plug formation in the hemostasis process, an adenosine 5′-diphosphate modified pro-coagulation hyaluronic acid (HA-ADP) coordinated with enhanced antibacterial activity of undecanal-modified chitosan (UCS) was fabricated through physical electrostatic cross-linking and freeze-drying. The as-prepared hydrogel sponges showed a porous structure suitable for blood cell adhesion. In particular, the hydrogel exhibited excellent antibacterial ability and promoted the adhesion of platelets and red blood cells, thus inducing a prominent pro-coagulation ability via platelet activation, which exhibits a shorter hemostasis time (58.94% of control) in vitro. Compared with commercially available CELOX and gelatin sponge (GS), HA-ADP/UCS accelerates hemostasis and reduces blood loss in both rat tail amputation and rat artery injury models. Furthermore, all the samples exhibited superior cytocompatibility and biodegradability. Due to these performances, HA-ADP/UCS promoted full-thickness skin defect healing significantly in vivo. All the properties of HA-ADP/UCS suggest that it has great potential for translation as a clinical application material for hemostatic and wound healing.

•

Using adenosine 5'-diphosphate, a physiologically platelet agonist, to modify hyaluronic acids to promote hemostatic effect.

•

Using undecanal to modify Chitosan fabricated with HA-ADP via electrostatic interactions and noncovalent crosslinking method.

•

The hydrogel sponges have excellent antibacterial properties related to the bacterial disruption abilities of UCS.

•

HA-ADP/UCS posed a great hemostatic performance, promoting wound healing by regulating inflammatory response in early stage.

Injectable and adhesive hydrogels for dealing with wounds

INTRODUCTION

The development of wound dressing materials that combine healing properties, ability to self-repair the material damages, skin-friendly adhesive nature, and competent mechanical properties have surpassing functional importance in healthcare. Due to their specificity, hydrogels have been recognized as a new gateway in biological materials to treat dysfunctional tissues. The design and creation of injectable hydrogel-based scaffolds have extensively progressed in recent years to improve their therapeutic efficacy and to pave the way for their easy minimally invasive administration. Hence, injectable hydrogel biomaterials have been prepared to eventually translate into minimally invasive therapy and pose a lasting effect on regenerative medicine.

AREAS COVERED

This review highlights the recent development of adhesive and injectable hydrogels that have applications in wound healing and wound dressing. Such hydrogel materials are not only expected to improve therapeutic outcomes but also to facilitate the easy surgical process in both wound healing and dressing.

EXPERT OPINION

Wound healing seems to be an appealing approach for treating countless life-threatening disorders. With the average increase of life expectancy in human societies, an increase in demand for injectable skin replacements and drug delivery carriers for chronic wound healing is expected.

A review: Gelatine as a bioadhesive material for medical and pharmaceutical applications

Bioadhesive polymers offer versatility to medical and pharmaceutical inventions. The incorporation of such materials to conventional dosage forms or medical devices may confer or improve the adhesivity of the bioadhesive systems, subsequently prolonging their residence time at the site of absorption or action and providing sustained release of actives with improved bioavailability and therapeutic outcomes. For decades, much focus has been put on scientific works to replace synthetic polymers with biopolymers with desirable functional properties. Gelatine has been considered one of the most promising biopolymers. Despite its biodegradability, biocompatibility and unique biological properties, gelatine exhibits poor mechanical and adhesive properties, limiting its end-use applications. The chemical modification and blending of gelatine with other biomaterials are strategies proposed to improve its bioadhesivity. Here we discuss the classical approaches involving a variety of polymer blends and composite systems containing gelatine, and gelatine modifications via thiolation, methacrylation, catechol conjugation, amination and other newly devised strategies. We highlight several of the latest studies on these strategies and their relevant findings.

Injectable Hydrogel Based on Modified Gelatin and Sodium Alginate for Soft-Tissue Adhesive

To assist or replace the traditional suture techniques for wound closure, soft-tissue adhesives with excellent adhesion strength and favorable biocompatibility are of great significance in biomedical applications. In this study, an injectable hydrogel tissue adhesive containing adipic acid dihydrazide–modified gelatin (Gel-ADH) and oxidized sodium alginate (OSA) was developed. It was found that this tissue adhesive possessed a uniform structure, appropriate swelling ratio, good injectability, and excellent hemocompatibility and cytocompatibility. The adhesion capacity of the developed adhesive with optimized component and concentration was stronger than that of the commercial adhesive Porcine Fibrin Sealant Kit. All these results suggested that the developed hydrogel was a promising candidate for a soft-tissue adhesive.

Injectable, self-healing and pH responsive stem cell factor loaded collagen hydrogel as a dynamic bioadhesive dressing for diabetic wound repair

As one of the serious complications of diabetes, diabetic ulcers induce several clinical problems. Although a variety of wound dressings are commonly employed, their role is too simple to integrate wound adaptation, therapeutics and effectiveness. To meet this comprehensive need, an injectable hydrogel (Col/APG) consisting of collagen and polyethylene glycol was prepared and loaded with umbilical cord stem cell factor (SCF) for the treatment of diabetic wounds. The physico-chemical properties of the Col/APG hydrogel, including rheology, self-shaping and self-healing, were demonstrated to adapt to the wound. After loading with the SCF, the adhesion strength of the resulting Col/APG + SCF hydrogel was enhanced to 17 kPa and it also showed favorable biocompatibility. A rapid cellular response, sufficient collagen deposition and marked neovascularization were observed in the whole cortex defect model of a diabetic rat after the Col/APG + SCF hydrogel was applied. Additionally, the skew toward M2 macrophages, credited with providing the anti-inflammatory function, also existed in both hydrogel groups. These findings suggested that the Col/APG hydrogel is a desirable scaffold and the Col/APG hydrogel loaded stem cell factor as a dressing is a promising treatment for diabetic tissue regeneration.