UV, Blue, Green, Yellow, Red, and Small: Newest Developments on Eu2+-Doped Nanophosphors

Achieving Dual Emission of Fluorescence and Phosphorescence from Anti-Kasha's Metal-Organic Halides for Information Encryption

Luminescent materials typically emit their fluorescence or phosphorescence at a specific wavelength with different excitation energies via the so-called Kasha's rule. If fluorescence or phosphorescence emission via anti-Kasha's rule could be achieved, it will hold great promise for applications in many fields. In this work, we report the synthesis and characterization of new metal-organic halide materials with dual emission of efficient room-temperature phosphorescence and fluorescence, which obey anti-Kasha's rule. Here, three emitting metal-organic halides with formula [ZnX2(bidpe)] (X = Cl for 1, X = Br for 2, X = I for 3, bidpe = 4,4'-bis(imidazol-1-yl)diphenyl ether) were prepared and their photophysical properties were investigated. The complexes exhibit dual emission of fluorescence and phosphorescence via anti-Kasha's rule, and their RTP properties of resultant products are modulated by halide substitution synthesis. DFT calculations indicate that the singlet states exhibit a halide-ligand charge transfer (XLCT) character while the triplet states are dominated by the intraligand π-π* transitions. Furthermore, the multilevel information encryption and anticounterfeiting applications are developed by virtue of anti-Kasha's rule emission.

Host-Guest Metal-Organic Frameworks-Based Long-Afterglow Luminescence Materials

Long-afterglow materials have a broad of applications in optoelectronic devices, sensors, medicine and other fields due to their excellent luminescent properties. The host-guest long-afterglow MOFs material combines the advantages of multi-component characteristics and the stability of MOFs, which improves its luminous performance and expands its other properties. This review introduces the classification, synthesis and application of host-guest MOFs materials with long afterglow. Due to their rigid frames and multi-channel characteristics, MOFs can load common guest materials including rare earth metals, organic dyes, carbon dots, etc. The synthesis methods of loading guest materials into MOFs include solvothermal synthesis, post-encapsulation, post-modification, etc. Those long-afterglow host-guest MOFs have a wide range of applications in the fields of sensors, information security and biological imaging.

Investigation on structure and photoluminescence properties of Ho3+ doped Ca3(VO4)2 phosphors for luminescent devices

This study focuses on the synthesis and characterization of Ho3+ doped Ca3(VO4)2 phosphor for potential application in solid-state lighting technology. A citrate-based sol-gel process is optimized to achieve sheet-like morphologies in the phosphor material. The investigation reveals UV absorption at 371 nm, indicating a band gap of 3.28 eV. Emission transitions at (506, 541, and 651) nm are observed when excited at 451 nm, with an optimal Ho3+ concentration of 0.05 mol resulting in robust green emission at 541 nm. The concentration quenching in Ca3(VO4)2:xHo3+ phosphors is discussed in detail with Blesse's and Dexter's models. The concentration quenching effect found in the studied samples is due to the dipole-dipole interactions. Judd-Ofelt intensity parameters were calculated from the excitation bands, and for Ω 2, Ω 4, and Ω 6 are (0.16, 0.17, and 0.36) × 10-20 cm2, respectively. The emission properties for the (5S2 + 5F4) → 5I8 and 5F5 → 5I8 transitions are also estimated with J-O parameters. The higher magnitude of branching ratios (83%) and emission cross-sections (1.6 × 10-21 cm2) suggest that the Ca3(VO4)2:0.05Ho3+ phosphor materials may be suitable for efficient green-emitting device applications. The CIE coordinates confirm the potential of Ho3+-doped phosphors for green emissions, making them suitable for solid-state lighting and display technology.

Efficient Deep-Blue Light-Emitting Diodes from Highly Luminescent Eu2+-Doped Alkali Metal Halide Nanocrystals via Lattice Field Modulation

Lead-halide perovskite nanocrystals (NCs) are promising for fabricating deep-blue (<460 nm) light-emitting diodes (LEDs), but their development is plagued by low electroluminescent performance and lead toxicity. Herein, the synthesis of 12 kinds of highly luminescent and eco-friendly deep-blue europium (Eu2+)-doped alkali-metal halides (AX:Eu2+; A = Na+, K+, Rb+, Cs+; X = Cl-, Br-, I-) NCs is reported. Through adjustment of the coordination environment, efficient deep-blue emission from Eu-5d → Eu-4f transitions is realized. The representative CsBr:Eu2+ NCs exhibit a high photoluminescence quantum yield of 91.1% at 441 nm with a color coordinate at (0.158, 0.023) matching with the Rec. 2020 blue specification. Electrically driven deep-blue LEDs from CsBr:Eu2+ NCs are demonstrated, achieving a record external quantum efficiency of 3.15% and half-lifetime of ∼1 h, surpassing the reported metal-halide deep-blue NCs-based LEDs. Importantly, large-area LEDs with an emitting area of 12.25 cm2 are realized with uniform emission, representing a milestone toward commercial display applications.

Size-Dependent Blue Emission from Europium-Doped Strontium Fluoride Nanoscintillators for X-Ray-Activated Photodynamic Therapy

Successful implementation of X-ray-activated photodynamic therapy (X-PDT) is challenging because most photosensitizers (PSs) absorb light in the blue region, but few nanoscintillators produce efficient blue scintillation. Here, efficient blue-emitting SrF2:Eu scintillating nanoparticles (ScNPs) are developed. The optimized synthesis conditions result in cubic nanoparticles with ≈32 nm diameter and blue emission at 416 nm. Coating them with the meso-tetra(n-methyl-4-pyridyl) porphyrin (TMPyP) in a core-shell structure (SrF@TMPyP) results in maximum singlet oxygen (1O2) generation upon X-ray irradiation for nanoparticles with 6TMPyP depositions (SrF@6TMPyP). The 1O2 generation is directly proportional to the dose, does not vary in the low-energy X-ray range (48-160 kVp), but is 21% higher when irradiated with low-energy X-rays than irradiations with higher energy gamma rays. In the clonogenic assay, cancer cells treated with SrF@6TMPyP and exposed to X-rays present a significantly reduced survival fraction compared to the controls. The SrF2:Eu ScNPs and their conjugates stand out as tunable nanoplatforms for X-PDT due to the efficient blue emission from the SrF2:Eu cores; the ability to adjust the scintillation emission in terms of color and intensity by controlling the nanoparticle size; the efficient 1O2 production when conjugated to a PS and the efficacy of killing cancer cells.

Tunable Ultralong Room Temperature Phosphorescence Based on Zn(II)-Niacin Metal-Organic Complex: Accessible and Low-Cost

Long persistent luminescence (LPL) materials open up a new avenue for information security, anticounterfeiting technology, and bioimaging thanks to their unique luminescence characteristics like ultralong exciton migration distances and multiple-colored light emission. As materials that have value for commercial applications, they attract much attention. In this paper, inexpensive, accessible, and eco-friendly niacin is used as a ligand to combine with the universally used metal ion Zn(II) to form a crystallized metal-organic complex dubbed Zn-NA. The named material possesses an ultralong room-temperature phosphorescence (RTP) with a lifetime of up to 265 ms under the atmosphere and up to 446 ms at 77 K. Notably, it exhibits a bright and multimode (excitation- and temperature-dependent) color-tunable LPL that changes from blue to cyan and then to yellow-green upon removal of the irradiation sources. Depending on its photoluminescence and theoretical calculations, the observed long-lived RTP of Zn-NA can be attributed to the coexistence of a single-molecule state induced by the heavy atom effect and an aggregated state within a dense crystalline structure.

LaMg6Ga6S16: a chemical stable divalent lanthanide chalcogenide

Divalent lanthanide inorganic compounds can exhibit unique electronic configurations and physicochemical properties, yet their synthesis remains a great challenge because of the weak chemical stability. To the best of our knowledge, although several lanthanide monoxides epitaxial thin films have been reported, there is no chemically stable crystalline divalent lanthanide chalcogenide synthesized up to now. Herein, by using octahedra coupling tetrahedra single/double chains to construct an octahedral crystal field, we synthesized the stable crystalline La(II)-chalcogenide, LaMg6Ga6S16. The nature of the divalent La2+ cations can be identified by X-ray photoelectron spectroscopy, X-ray absorption near-edge structure and electron paramagnetic resonance, while the stability is confirmed by the differential thermal scanning, in-situ variable-temperature powder X-ray diffraction and a series of solid-state reactions. Owing to the particular electronic characteristics of La2+(5d1), LaMg6Ga6S16 displays an ultrabroad-band green emission at 500 nm, which is the inaugural instance of La(II)-based compounds demonstrating luminescent properties. Furthermore, as LaMg6Ga6S16 crystallizes in the non-centrosymmetric space group, P-6, it is the second-harmonic generation (SHG) active, possessing a comparable SHG response with classical AgGaS2. In consideration of its wider band gap (Eg = 3.0 eV) and higher laser-induced damage threshold (5×AgGaS2), LaMg6Ga6S16 is also a promising nonlinear optical material.

Achieving High-Temperature Phosphorescence by Organic Cocrystal Engineering

Organic phosphors offer a promising alternative in optoelectronics, but their temperature-sensitive feature has restricted their applications in high-temperature scenarios, and the attainment of high-temperature phosphorescence (HTP) is still challenging. Herein, a series of organic cocrystal phosphors are constructed by supramolecular assembly with an ultralong emission lifetime of up to 2.16 s. Intriguingly, remarkable stabilization of triplet excitons can also be realized at elevated temperature, and green phosphorescence is still exhibited in solid state even up to 150 °C. From special molecular packing within the crystal lattice, it has been observed that the orientation of isolated water cluster and well-controlled molecular organization via multiple interactions can favor the structural rigidity of cocrystals more effectively to suppress the nonradiative transition, thus resulting in efficient room-temperature phosphorescence and unprecedented survival of HTP.

Composition-dependent photoluminescence in nanocrystalline La2Hf2-xZrxO7:Eu phosphor: role of chemical twin Zr/Hf environments around a luminescent center

Based on chemical intuition, linear trends are anticipated in Eu3+ photoluminescence performance inside a pyrochlore matrix of the chemical twins, Hf and Zr, owing to probable geometrical and chemical similarity around the luminescent center. The present work reports the drastically fluctuating result of doping Eu3+ in nanocrystalline pyrochlore, La2Hf2-xZrxO7 (LHZO), matrix on composition variation; the variation is counter to the anticipation-based chemical brotherhood of Hf and Zr. Zirconium-enriched samples of LHZO improve asymmetry around Eu3+ ion leading to enhanced photoluminescence quantum yield (PLQY). The samples with compositions 0.7Hf and 1.3Zr depict the lowest non-radiative channels with the highest theoretically calculated PLQY of ∼71% and excellent thermal stability (∼91%). Synergistic experimental and theoretical analysis reveals that Eu does not unbiasedly occupy La-sites in the pyrochlore LHZO matrix towards chemical twins of Hf and Zr; rather, it energetically prefers to occupy Zr-rich vicinal sites. When the composition with Zr is in the low-medium range, Eu has a higher probability of occupying Zr-rich vicinal sites depicting higher lifetime and PLQY. When Zr-content goes beyond 70-80%, the other site occupancies start contributing leading to a reduction in both lifetime and quantum yield. This work paves a great strategy and provides a futuristic potential to utilize europium luminescence in separating chemically close Hf-Zr for various technological applications.

Persistent luminescent nanophosphors for applications in cancer theranostics, biomedical, imaging and security

The extraordinary and unique properties of persistent luminescent (PerLum) nanostructures like storage of charge carriers, extended afterglow, and some other fascinating characteristics like no need for in-situ excitation, and rechargeable luminescence make such materials a primary candidate in the fields of bio-imaging and therapeutics. Apart from this, due to their extraordinary properties they have also found their place in the fields of anti-counterfeiting, latent fingerprinting (LPF), luminescent markings, photocatalysis, solid-state lighting devices, glow-in-dark toys, etc. Over the past few years, persistent luminescent nanoparticles (PLNPs) have been extensively used for targeted drug delivery, bio-imaging guided photodynamic and photo-thermal therapy, biosensing for cancer detection and subsequent treatment, latent fingerprinting, and anti-counterfeiting owing to their enhanced charge storage ability, in-vitro excitation, increased duration of time between excitation and emission, low tissue absorption, high signal-to-noise ratio, etc. In this review, we have focused on most of the key aspects related to PLNPs, including the different mechanisms leading to such phenomena, key fabrication techniques, properties of hosts and different activators, emission, and excitation characteristics, and important properties of trap states. This review article focuses on recent advances in cancer theranostics with the help of PLNPs. Recent advances in using PLNPs for anti-counterfeiting and latent fingerprinting are also discussed in this review.

Self-Luminous Probe with One-Step Energy Conversion from Bioluminescence to NIR-IIb

Self-luminous probes with near-infrared (NIR) emission are powerful tools for deep-penetration and autofluorescence-free imaging, owing to the joint optimization of both excitation and emission. However, the limited emission wavelength and requirement for multistep energy transfer limit its potency. In this study, the concept of direct wavelength conversion is established from visible light (vis) to NIR-IIb using an exquisitely designed sensitizer-activator ion pair. The manipulation of the doping hosts enables a pair of energy levels between the sensitizer and activator. Based on this a class of broadband vis-responsive nanocrystals with intense NIR-II emission is prepared. The stability and quantum yield (up to 7.4%) of the nanocrystals are further enhanced by ZnS passivation via coherent epitaxial growth. By coupling luciferase, the self-luminous probe can convert bioluminescence to NIR-IIb luminescence (>1500 nm) through a one-step energy transfer. A maximum penetrable thickness of 6 mm is achieved in the porcine tissue model. Collectively, the distinctive photon-conversion performance of this probe offers the prospect of high-resolution labeling of deep-seated lesions.

Probing site-selective doping and charge compensating defects in KMgF3: insights from a hybrid DFT study

Design of optoelectronic materials with tunable properties using activators and defect clusters has become one of the prime interests of current research. In this study, detailed Density Functional Theory based calculations have been presented to investigate the geometries and electronic structures of various possible defect clusters using Eu-KMgF3 as a probe which has numerous technological and industrial applications. Using a more reliable hybrid density functional, we have calculated defect formation energies and thermodynamic transition levels to get knowledge about the site selectivity of Eu. It has been observed that the electronic structure of Eu-KMgF3 is not only dependent on the site of doping but also on the oxidation state of Eu (2+/3+). The present study also investigates the relative stability of different kinds of defects and defect clusters under various synthetic growth conditions. The ultimate aim is to find out the microscopic origin of the fundamental optical properties of Eu-KMgF3 and provide an unambiguous explanation of available experimental results. Thus, it has been revealed that doping with Eu results in the spontaneous formation of intrinsic defects, which contribute to the observed optical behaviour. We have also extended our study to investigate the role of codoping with Li in determining the geometry and electronic structure of Eu-KMgF3 aiming to explain its impact on the optical properties. Thus, a complete presentation of the influence of the activator in the absence and presence of lattice defects on the optical properties of KMgF3 has been accomplished in the current study. We strongly believe that the present study will be helpful in designing tunable phosphor materials by a defect-controlled synthesis strategy.

Dual-emissive solid-state histidine-stabilized gold nanoclusters for applications in white-light generation

The majority of present-day white-light emitting devices (WLEDs) are built upon the use of rare-earth elements, which have a short supply, are expensive and can become extremely toxic. Thus, in this work, we synthesized an eco-friendly, efficient and cheap white-light emitting material (WLEM) based on solid-state histidine-stabilized gold nanoclusters (His-AuNCs), obtained through the lyophilization of microwave-synthesized photoluminescent His-AuNCs. Their morphological and structural characterization was followed by thorough evaluation of their intrinsic solid-state photoluminescence properties via steady-state and time-resolved fluorescence spectroscopy and microscopy, at multiple excitation wavelengths. A white-light emission was observed under UV light excitation due to the two-band broad emission, with maxima at 475 and 520 nm, covering a large area of the visible spectrum. In order to evaluate the purity of the white-light emission we calculated the chromaticity coordinates, at different wavelengths, and displayed them on a CIE (Commision Internationale d'Eclairage) diagram. An excellent value of (0.36, 0.33) was found at 420 nm excitation, which falls within the range of pure white-light emission. Moreover, the His-AuNCs show great photo- and thermo-stability, thus proving their ability to perform as a reliable WLEM with potential use in the development of eco-friendly WLEDs.

Glowing selenates: novel alkaline earth nanoparticles

Up to now, no selenate nanoparticles have been described even though much research has been done on respective oxidic compounds such as sulfates and phosphates. For the first time, alkaline earth selenates of the composition MSeO₄ (M = Ca, Sr, Ba) were synthesized as nanoparticles or nanorods as described in this publication. For this purpose, a micro emulsion method was applied using CTAB as a surfactant. Using X-ray diffraction measurements (XRD) phase purity of the materials could be proven. Furthermore, the nanoparticles were analyzed by raster electron microscopy (REM) and dynamic light scattering (DLS) measurements. Finally, the products were doped with small amounts of Eu³⁺ to obtain luminescent materials. Successful doping was demonstrated by luminescence investigations in the region of 18 000 to 14 000 cm^-1 (550-715 nm). Incorporation of Eu³⁺ led to strong red-emitting nanoparticles. Low temperature measurements at 10 K allowed conclusions about the site symmetry of Eu³⁺ ions located on the alkaline earth sites.

Mn2+ Luminescence in Ca9Zn1-xMnxNa(PO4)7 Solid Solution, 0 ≤ x ≤ 1

The solid solution Ca₉Zn_1-xMn_xNa(PO₄)₇ (0 ≤ x ≤ 1.0) was obtained by solid-phase reactions under the control of a reducing atmosphere. It was demonstrated that Mn²⁺-doped phosphors can be obtained using activated carbon in a closed chamber, which is a simple and robust method. The crystal structure of Ca₉Zn_1-xMn_xNa(PO₄)₇ corresponds to the non-centrosymmetric β-Ca₃(PO₄)₂ type (space group R3c), as confirmed by powder X-ray diffraction (PXRD) and optical second-harmonic generation methods. The luminescence spectra in visible area consist of a broad red emission peak centered at 650 nm under 406 nm of excitation. This band is attributed to the ⁴T₁ → ⁶A₁ electron transition of Mn²⁺ ions in the β-Ca₃(PO₄)₂-type host. The absence of transitions corresponding to Mn⁴⁺ ions confirms the success of the reduction synthesis. The intensity of the Mn²⁺ emission band in Ca₉Zn_1-xMn_xNa(PO₄)₇ rising linearly with increasing of x at 0.05 ≤ x ≤ 0.5. However, a negative deviation of the luminescence intensity was observed at x = 0.7. This trend is associated with the beginning of a concentration quenching. At higher x values, the intensity of luminescence continues to increase but at a slower rate. PXRD analysis of the samples with x = 0.2 and x = 0.5 showed that Mn²⁺ and Zn²⁺ ions replace calcium in the M5 (octahedral) sites in the β-Ca₃(PO₄)₂ crystal structure. According to Rietveld refinement, Mn²⁺ and Zn²⁺ ions jointly occupy the M5 site, which remains the only one for all manganese atoms within the range of 0.05 ≤ x ≤ 0.5. The deviation of the mean interatomic distance (∆l) was calculated and the strongest bond length asymmetry, ∆l = 0.393 Å, corresponds to x = 1.0. The large average interatomic distances between Mn²⁺ ions in the neighboring M5 sites are responsible for the lack of concentration quenching of luminescence below x = 0.5.

Long afterglow particle enables spectral and temporal light management to boost photosynthetic efficiency

Herein, we develop a strategy of matched spectral and temporal light management to improve photosynthetic efficiency by co-assembling natural thylakoid membrane (TM) with artificial long afterglow particle (LAP). To be specific, LAP with excellent stability and biocompatibility possesses the capabilities of light conversion and storage, optically-matched with the absorption of TM. These favorable features permit LAP as an additional well-functioned light source of photosynthesis performed by TM. As a consequence, enhanced photosynthesis is achieved after co-assembly, compared with pure TM. Under light, the rates of electron transfer, oxygen yield and adenosine triphosphate (ATP) production in this biohybrid architecture are boosted owing to down-conversion fluorescence emission from LAP. Under dark, persistent phosphorescence emission in charged LAP facilitates continual photosynthesis of TM, while that of pure TM almost stops immediately. This proof-of-concept work opens a new route to augment the photosynthetic efficiency of green plants by utilizing precise light-managed materials.

Stabilization of Eu2+ in Li2B4O7 with the BO3 network through U6+ co-doping and defect engineering

Owing to the unique 4f-5d transitions and the involvement of 5d electrons, the divalent europium (Eu²⁺) ion is extensively used as a dopant ion in luminescent materials for phosphor-converted light emitting diodes (pc-LEDs) and other technological applications. Earlier reports in most of the cases have shown that the reduction of Eu³⁺ to Eu²⁺ requires very high temperatures and large hydrogen flux. In this study, a co-doping strategy with higher valent U⁶⁺ ions was utilized to successfully stabilize Eu²⁺ ions in the Li₂B₄O₇ (LTB) host with both the BO₃ and BO₄ network in low H₂ flux of only 8%. It is postulated that charge transfer occurs from U to Eu, resulting in the reduction of the charged state of Eu and the reaction probably proceeds via the formation of paramagnetic transient [U⁵⁺-Eu³⁺] species in the co-doped LTB. The same is also believed to be facilitated by the enhanced formation of Li-O type vacancy clusters in co-doped samples and enhanced oxygen vacancies in a reducing atmosphere. We believe this work will pave a new pathway for stabilizing the unusual oxidation state of lanthanides and transition metal ions through co-doping with hexavalent uranium ions.

Rapid Aqueous-Phase Synthesis and Photoluminescence Properties of K0.3Bi0.7F2.4:Ln3+ (Ln = Eu, Tb, Pr, Nd, Sm, Dy) Nanocrystalline Particles

Trivalent lanthanides (Ln3+) doped bismuth-based inorganic compounds have attracted considerable interest as promising candidates for next-generation inorganic luminescent materials. Here, a series of K0.3Bi0.7F2.4 (KBF) nanocrystalline particles with controlled morphology have been synthesized through a low-temperature aqueous-phase precipitation method. Using KBF as the host matrix, Eu3+, Tb3+, Pr3+, Nd3+, Sm3+, and Dy3+ ions are introduced to obtain K0.3Bi0.7F2.4:Ln3+ (KBF:Ln) nanophosphors. The as-prepared KBF:Ln nanophosphors exhibit commendable photoluminescence properties, in which multicolor emissions in a single host lattice can be obtained by doping different Ln3+ ions when excited by ultraviolet light. Moreover, the morphology and photoluminescence performance of these nanophosphors remain unchanged under different soaking times in water, showing good stability in a humid environment. The proposed simple and rapid synthesis route, low-cost and nontoxic bismuth-based host matrix, and tunable luminescent colors will lead the way to access these KBF:Ln nanophosphors for appealing applications such as white LEDs and optical thermometry.

Inorganic Lanthanide Compounds with f-d Transition: From Materials to Electroluminescence Devices

With the rapid development of the panel display market, demand for efficient light emitters as active layers in electroluminescence (EL) devices has significantly increased. Luminescent inorganic lanthanide compounds (ILCs) with a characteristic f-d transition are particularly preferred for EL devices because of their high photoluminescent quantum yield, short excited-state lifetime, tunable emission spectra, and high thermal stability. In this Perspective, we first present an overview of inorganic lanthanide compounds with an emphasis on the mechanisms and characteristics of f-d emission. Then, the comprehensive advances of lanthanide element-doped inorganic compounds for EL study in recent decades are summarized. Moreover, the recent progress in directly employing ILCs for EL applications and rational improvement strategies in EL performance are highlighted. Last, we summarize the current challenges and opportunities of ILC-based EL devices as well as future improvement directions.

Review on long afterglow nanophosphors, their mechanism and its application in round-the-clock working photocatalysis

Semiconductor assisted photocatalysis is one of the most efficient methods for the degradation of complex organic dyes. A major limiting factor of semiconductor assisted photocatalysis is the requirement of a continuous source of light to perform a redox reaction. One of the upcoming solutions is photon energy-storing long afterglow/persistent phosphors. They are an unusual kind of rechargeable, photon energy capturing/trapping phosphors that can trap charge carriers (electrons/holes) in their meta-stable energy levels, thereby resulting in persistent luminescence. Persistence luminescence from such materials can range from minutes to hours. The coupling of long afterglow phosphors (LAP) with the conventional semiconductor is a promising way to support the photocatalytic process even in dark. In addition, dissimilar band structures of LAPs and semiconductor results in formation of heterojunction which further suppresses the recombination of charge. Such an encouraging idea of LAP for round-the-clock working photocatalytic system is in its premature stage; which is required to be investigated fully. Thus, we present a state-of-art review on the potential materials for assisting round-the-clock photocatalysis, trapping-detrapping mechanism in LAP materials, fabrication strategies and their associated characterization tools. Review also covers LAP materials and their photocatalytic mechanism briefly.

Ag nanoparticles significantly improve the slow decay brightness of SrAl2O4:Eu2+,Dy3+ by the surface plasmon effect

Long afterglow luminescence material is an important energy storage material. For large-scale applications, the low afterglow brightness especially in the slow decay process is a weak point. At present, the methods to improve the afterglow performance are mainly focused on the study of defects and luminescence centers in the matrix. Herein, from the point of improving the utilization rate of luminescence center and traps, Ag nanoparticles, which can introduce the surface plasmon effect (SPE) are deposited on the surface of SrAl₂O₄:Eu²⁺,Dy³⁺ (SAO). The results show that the afterglow intensity of SrAl₂O₄:Eu²⁺,Dy³⁺ is enhanced, and the luminescence intensity in the slow decay process is enhanced by about 100%, which is significant for SrAl₂O₄:Eu²⁺,Dy³⁺. Moreover, we also solve the stability water-resistance of Ag/SrAl₂O₄:Eu²⁺,Dy³⁺ by constructing Ag/SrAl₂O₄:Eu²⁺,Dy³⁺@SiO₂ composite material. In this study, we explained the enhancement mechanism of Ag/SrAl₂O₄:Eu²⁺,Dy³⁺ and provided a new method for enhancing the afterglow performance of SrAl₂O₄:Eu²⁺,Dy³⁺.

Crystal-field mediated electronic transitions of EuS up to 35 GPa

An advanced experimental and theoretical model to explain the correlation between the electronic and local structure of Eu[Formula: see text] in two different environments within a same compound, EuS, is presented. EuX monochalcogenides (X: O, S, Se, Te) exhibit anomalies in all their properties around 14 GPa with a semiconductor to metal transition. Although it is known that these changes are related to the [Formula: see text] [Formula: see text] [Formula: see text] electronic transition, no consistent model of the pressure-induced modifications of the electronic structure currently exists. We show, by optical and x-ray absorption spectroscopy, and by ab initio calculations up to 35 GPa, that the pressure evolution of the crystal field plays a major role in triggering the observed electronic transitions from semiconductor to the half-metal and finally to the metallic state.

Mesoporous Silica Nanoparticles-Embedded Lanthanide Organic Polyhedra for Enhanced Stability, Luminescence and Cell Imaging

We report here a simple but efficient “ship-in-a-bottle” synthetic strategy for increasing the stability and luminescence performance of LOPs by embedding them into mesoporous silica nanoparticles (MSNs). Three types of...

Light-emitting self-assembled metallacages

Coordination-driven self-assembly of metallacages has garnered significant interest because of their 3D layout and cavity-cored nature. The well-defined, highly tunable metallacage structures render them particularly attractive for investigating the properties of luminophores, as well as for inducing novel photophysical characters that enable widespread applications. In this review, we summarize the recent advances in synthetic methodologies for light-emitting metallacages, and highlight some representative applications of these metallacages. In particular, we focus on the favorable photophysical properties—including high luminescence efficiency in various physical states, good modularity in photophysical properties and stimulus responsiveness—that have resulted from incorporating ligands displaying aggregation-induced emission (AIE) into metallacages. These features show that the synergy between carrying out coordination-driven self-assembly and using luminophores with novel photophysical characteristics like AIE could stimulate the development of supramolecular luminophores for applications in fields as diverse as sensing, biomedicine and catalysis.

Efficient Persistent Luminescence Tuning Using a Cyclodextrin Inclusion Complex as Efficient Light Conversion Materials

Developing an appropriate method to broaden the color of long persistent luminescence materials has important scientific significance and practical value but remains a great challenge. Herein, we have developed a unique strategy to fine-tune the persistent luminescence using the inclusion complex of rhodamine 6G with (2-hydroxypropyl)-β-cyclodextrin as efficient light conversion materials. The emitting color of the novel persistent luminescence material could be tuned from green to orange by changing the concentration of the light conversion agent. Furthermore, afterglow decay measurements showed that the initial afterglow brightness is 9.65 cd/m², and the initial afterglow brightness gradually decreased as the cyclodextrin inclusion compound coating increased. This design concept introduces a new perspective for broadening the luminescence color of afterglow phosphors, which may open up new opportunities for persistent luminescence materials toward many emerging applications.

Highly efficient blue-emitting phosphor of Sr[B8O11(OH)4]:Eu2+ prepared by a self-reduction method

A highly efficient blue-emitting phosphor of Sr[B₈O₁₁(OH)₄]:xEu²⁺ was synthesized though a medium-high temperature boric acid melting method by means of a self-reduction mechanism. The quantum yield and color purity of Sr[B₈O₁₁(OH)₄]:6%Eu²⁺ are both as high as 99%. The PL intensity of Sr[B₈O₁₁(OH)₄]:6%Eu²⁺ at 150 °C remains 84% of that at 25 °C.

Recent advances in persistent luminescence based on molecular hybrid materials

Molecular persistently luminescent materials have received recent attention due to their promising applications in optical displays, biological imaging, chemical sensing, and security systems. In this review, we systematically summarize recent advances in establishing persistently luminescent materials-specifically focusing on materials composed of molecular hybrids for the first time. We describe the main strategies for synthesizing these hybrid materials, namely: (i) inorganics/organics, (ii) organics/organics, and (iii) organics/polymer systems and demonstrate how molecular hybrids provide synergistic effects, while improving luminescence lifetimes and efficiencies. These hybrid materials promote new methods for tuning key physical properties such as singlet-triplet excited state energies by controlling the chemical interactions and molecular orientations in the solid state. We review new advances in these materials from the perspective of examining experimental and theoretical approaches to room-temperature phosphorescence and thermally-activated delayed fluorescence. Finally, this review concludes by summarizing the current challenges and future opportunities for these hybrid materials.

Recent progress of effect of crystal structure on luminescence properties of Ce3+–Eu2+ Co-doped phosphors

Currently, the mechanism of Ce³⁺–Eu²⁺ ET is frequently used to obtain color adjustable or white phosphors. Correspondingly, the ET efficiency from Ce³⁺ to Eu²⁺ becomes an important indication of the luminescent properties of phosphors. However, the ET efficiency calculated using the formula does not always match the emission spectra; the transmission efficiency of Ce³⁺ is high, but the emission efficiency of Eu²⁺ is low, depending on our investigation results. In addition to this problem, here we mainly review, on the basis of substantial examples, how to boost the actual ET efficiency of Ce³⁺-to-Eu²⁺ and thus to improve the luminescent properties of phosphors through the rational design of layered crystal structure and the way of selective occupation of activator ions. Moreover, the possible physical mechanisms are proposed.

Effect of crystal structure on luminescence properties of Ce³⁺–Eu²⁺ co-doped phosphors.

YAG:Ce3+ Phosphor: From Micron-Sized Workhorse for General Lighting to a Bright Future on the Nanoscale

The renowned yellow phosphor yttrium aluminum garnet (YAG) doped with trivalent cerium has found its way into applications in many forms: as powder of micron sized crystals, as a ceramic, and even as a single crystal. However, additional technological advancement requires providing this material in new form factors, especially in terms of particle size. Where many materials have been developed on the nanoscale with excellent optical properties (e.g., semiconductor quantum dots, perovskite nanocrystals, and rare earth doped phosphors), it is surprising that the development of nanocrystalline YAG:Ce is not as mature as for these other materials. Control over size and shape is still in its infancy, and optical properties are not yet at the same level as other materials on the nanoscale, even though YAG:Ce microcrystalline materials exceed the performance of most other materials. This review highlights developments in synthesis methods and mechanisms and gives an overview of the state of the art morphologies, particle sizes, and optical properties of YAG:Ce on the nanoscale.

Analysis of Solid-State Luminescence Emission Amplification at Substituted Anthracenes by Host-Guest Complex Formation

Small robust organic molecules showing solid-state luminescence are promising candidates for optoelectronic materials. Herein, we investigate a series of diphenylphosphanyl anthracenes [9-PPh2 -10-R-(C14 H8 )] and their sulfur oxidised analogues. The oxidation causes drastic changes in the molecular structure as the new orientation of the bulky (S)PPh2 substituent induces a strong butterfly bent structure of the anthracene core, which triggers a strong bathochromic shift resulting in a green solid-state fluorescence. As the emission properties change only slightly upon aggregation the origin of the emission is attributed to a typical monomer fluorescence. The host-guest complexes of [9-(S)PPh2 -10-Ethyl-(C14 H8 )] with four basic arenes reveal an emission enhancement up to five-times higher quantum yields compared to the pure host. Less interchromophoric interactions and a restriction of intramolecular motion within the host molecules due to fixation by weak C-H⋅⋅⋅π interactions with the co-crystallised arene are responsible for that emission enhancement.

Underestimated Color Centers: Defects as Useful Reducing Agents in Lanthanide-Activated Luminescent Materials

Inorganic hosts, such as SrB4 O7 or certain nitrides, intrinsically stabilize Eu2+ even when the dopant is an Eu3+ -based precursor and reducing conditions are not employed in the synthesis. Although this concept is well known in the synthesis of phosphorescent materials, the mechanistic details are scarcely understood. Herein, we demonstrate that trapped charge carriers, such as color centers, can also act as redox partners to stabilize certain oxidation states of activators. Eu-activated CsMgCl3 and CsMgBr3 are used as examples. Upon doping with EuCl3 and in the absence of reducing conditions during the synthesis, dominant cyan or green luminescence from Eu2+ ions was observed. Photoluminescence spectroscopy at 10 K revealed that the reduction is correlated to color centers localized at defects. Although defects are typically undesired in phosphors, we have shown that their role may be underestimated and they could be used on purpose in the preparation of selected inorganic phosphors.

Magnetism and Afterglow United: Synthesis of Novel Double Core-Shell Eu2+ -Doped Bifunctional Nanoparticles

Afterglow-magnetic nanoparticles (NPs) offer enormous potential for bioimaging applications, as they can be manipulated by a magnetic field, as well as emitting light after irradiation with an excitation source, thus distinguishing themselves from fluorescent living cells. In this work, a novel double core-shell strategy is presented, uniting co-precipitation with combustion synthesis routes to combine an Fe3 O4 magnetic core (≈15 nm) with an afterglow SrAl2 O4 :Eu2+ ,Dy3+ outer coat (≈10 nm), and applying a SiO2 protective middle layer (≈16 nm) to reduce the luminescence quenching caused by the Fe core ions. The resulting Fe3 O4 @SiO2 @SrAl2 O4 :Eu2+ ,Dy3+ NPs emit green light attributed to the 4f6 5d1 →4f7 (8 S7/2 ) transition of Eu2+ under UV radiation and for a few seconds afterwards. This bifunctional nanocomposite can potentially be applied for the detection and separation of cells or diagnostically relevant molecules.

Eu(O2 C-C≡C-CO2 ): An EuII Containing Anhydrous Coordination Polymer with High Stability and Negative Thermal Expansion

Anhydrous Eu^II -acetylenedicarboxylate (EuADC; ADC^2- = ^- O₂ C-C≡C-CO₂ ^- ) was synthesized by reaction of EuBr₂ with K₂ ADC or H₂ ADC in degassed water under oxygen-free conditions. EuADC crystallizes in the SrADC type structure (I4₁ /amd, Z=4) forming a 3D coordination polymer with a diamond-like arrangement of Eu²⁺ nodes (msw topology including the connecting ADC^2- linkers). Deep orange coloured EuADC is stable in air and starts decomposing upon heating in an argon atmosphere only at 440 °C. Measurements of the magnetic susceptibilities (μ_eff =7.76 μ_B ) and ¹⁵¹ Eu Mössbauer spectra (δ=-13.25 mm s^-1 at 78 K) confirm the existence of Eu²⁺ cations. Diffuse reflectance spectra indicate a direct optical band gap of E_g =2.64 eV (470 nm), which is in accordance with the orange colour of the material. Surprisingly, EuADC does not show any photoluminescence under irradiation with UV light of different wavelengths. Similar to SrADC, EuADC exhibits a negative thermal volume expansion below room temperature with a volume expansion coefficient α_V =-9.4(12)×10^-6  K^-1 .

Efficient Luminescence of Sr2Si5N8:Eu2+ nanophosphor and its film applications to LED and Solar cell as a downconverter

Here we present the synthesis of the efficient nanophosphor Sr₂Si₅N₈:Eu²⁺ (D₅₀ = 144 nm) by a simple milling approach, its strong Rayleigh scattering, and its film applications to white LED and silicon solar cell as a downshifting medium. The final nanophosphor product showed the quantum efficiency comparable to the bulk phosphor which is, to our knowledge, the highest record of nitride nanophosphors. Especially the nanophosphor showed the more tail emission at the shorter-wavelength side of the emission spectrum and the faster thermal quenching with the more spectral broadening along with the temperature due to Rayleigh scattering. Also the lowering in the excitation spectrum was observed due to lower absorbance. Finally, the nanophosphor-dispersed polyvinyl alcohol (PVA) film was made, and its applications to white LED and silicon solar cell as a downshifting medium demonstrated that it gave the high color rendering property in white LED in spite of still lower luminous efficiency, and it caused the increase in efficiency of silicon solar cell.

Electronic Structure and Photoluminescence Properties of Eu(η9-C9H9)2

The electronic structure of Eu²⁺ compounds results from a complex combination of strongly correlated electrons and relativistic effects as well as weak ligand-field interaction. There is tremendous interest in calculating the electronic structure as nowadays the Eu²⁺ ion is becoming more and more crucial, for instance, in lighting technologies. Recently, interest in semiempirical methods to qualitatively evaluate the electronic structure and to model the optical spectra has gained popularity, although the theoretical methods strongly rely upon empirical inputs, hindering their prediction capabilities. Besides, ab initio multireference models are computationally heavy and demand very elaborative theoretical background. Herein, application of the ligand-field density functional theory (LFDFT) method that is recently available in the Amsterdam Modeling Suite is shown: (i) to elucidate the electronic structure properties on the basis of the multiplet energy levels of Eu configurations 4f⁷ and 4f⁶5d¹ and (ii) to model the optical spectra quite accurately if compared to the conventional time-dependent density functional theory tool. We present a theoretical study of the molecular Eu(η⁹-C₉H₉)₂ complex and its underlying photoluminescence properties with respect to the Eu 4f-5d electron transitions. We model the excitation and emission spectra with good agreement with the experiments, opening up the possibility of modeling lanthanides in complex environment like nanomaterials by means of LFDFT at much-reduced computational resources and cost.

Three colour solid-state luminescence from positional isomers of facilely modified thiophosphoranyl anthracenes

Three positional isomers of thiophosphoranyl anthracene were synthesized and their divers photophysical properties were investigated.