Ammonia–Borane and Amine–Borane Dehydrogenation Mediated by Complex Metal Hydrides

Two-dimensional molybdenum boride coordinating with ruthenium nanoparticles to boost hydrogen generation from hydrolytic dehydrogenation of ammonia borane

The coordination between carrier and active metal is critical to the catalytic efficiency of ammonia borane (AB) hydrolysis reaction. In the present study, we report a new type of catalytic support based on molybdenum boride (MBene) MoAl1-xB and demonstrate that the effective combination of MoAl1-xB with Ru nanoparticles can realize the significantly enhanced performance for hydrogen generation. Owing to the efficient activation and dissociation of reactants, the optimal Ru/MoAl1-xB catalyst achieves the large turnover frequency of 494 molH2 molRu-1 min-1, high hydrogen generation rate of 119817 mL min-1 gRu-1 and favorable apparent activation energy of 39.2 kJ mol-1 for the catalytic hydrolysis of AB under alkaline-free condition. The isotopic test suggests the cleavage of OH bond in H2O is the rate-determining step for hydrolysis reaction, while the fracture of B-H bond in AB is also well revealed by attenuated total reflectance (ATR)-Fourier transform infrared (FTIR) spectroscopy. Significantly, the flexible on-demand hydrogen generation is achieved by using chemical switches for on-off AB hydrolysis. This study provides a new support platform based on two-dimensional MBene to exploit efficient catalysts to boost AB dehydrogenation.

Selective dehydrogenation of ammonia borane to borazine and derivatives by rhodium olefin complexes

This report presents a selective synthetic approach towards borazine from ammonia borane using a dinuclear rhodium olefin homogeneous catalyst. The synthesis and spectroscopic characterization of a dirhodium ammonia borane complex as an intermediate provides insight into a possible mode of activation.

N2 Functionalization via Molybdenum-Nitride Complex: Stepwise BH Bond Additions

Reactivity of (triphosphine)MoIV-nitrido complex generated by N2 splitting, toward boranes is reported. The simple adduct Mo≡N→BH3 is observed with BH3.SMe2 while 1,2 addition is evidenced with 9-BBN leading to H-Mo=NBR2. A second addition of BH3.SMe2 is facile and forms an unprecedented complex featuring two bridging H between two B and the Mo centers. Addition of PMe3 or BH3.SMe2 promotes reductive elimination and N-H bond formation. The full sequence of functionalization at Mo≡N obtained after N2 splitting is therefore evidenced in this work.

Synthesis and Reactivity of Bis-tris(pyrazolyl)borate Lanthanide/Aluminum Heterobimetallic Trihydride Complexes

Molecular heterobimetallic hydride complexes of lanthanide (Ln) and main-group (MG) metals exhibit chemical properties unique from their monometallic counterparts and are highly reactive species, making their synthesis and isolation challenging. Herein, molecular Ln/Al heterobimetallic trihydrides [Ln(Tp)2(μ-H)2Al(H)(N″)] [2-Ln; Ln = Y, Sm, Dy, Yb; Tp = hydrotris(1-pyrazolyl)borate; N″ = N(SiMe3)2] have been synthesized by facile insertion of aminoalane [Me3N·AlH3] into the Ln-N amide bonds of [Ln(Tp)2(N″)] (1-Ln). Thus, this is a simple synthetic strategy to access a range of Ln/Al hydrides. Reactivity studies demonstrate that 2-Ln is a heterobimetallic hydride, with evidence for the cooperative nature of 2-Ln shown by the catalytic amine-borane dehydrocoupling under ambient conditions in contrast to its monomeric counterparts.

Regulation of Electronic Structures of the Urchin-Like NiCoP/CoP Nanocatalysts for Fast Hydrogen Evolution

The exploration of stable, efficient, and low-cost catalysts toward ammonia borane hydrolysis is of vital significance for the practical implementation of this hydrogen production technology. Integrating interface engineering and nano-architecture engineering is a favorable strategy to elevate catalytic performance, as it can modify the electronic structure and provide sufficient active sites simultaneously. In this work, urchin-like NiCoP/CoP heterostructures are prepared via a three-step hydrothermal-oxidation-phosphorization synthesis route. It is demonstrated that the original Ni/Co molar ratio and the amount of phosphorus are crucial for adjusting the morphology, enhancing the exposed surface area, facilitating charge transfer, and modulating the adsorption and activation of H2O molecules. Consequently, the optimal Ni1Co2P heterostructure displays remarkable catalytic properties in the hydrolysis of ammonia borane with a turnover frequency (TOF) value of 30.3 molH2 ⋅ min-1 ⋅ molmetal -1, a low apparent activation energy of 25.89 kJ ⋅ mol-1, and good stability. Furthermore, by combining infrared spectroscopy and isotope kinetics experiments, a possible mechanism for the hydrolysis of ammonia borane was proposed.

Half-Sandwich Zirconium and Hafnium Amidoborane Complexes: Precursors of Hydride Derivatives

Half-sandwich zirconium(IV) and hafnium(IV) complexes with amidoborane and hydride ligands have been isolated in the stoichiometric reactions of mono(pentamethylcyclopentadienyl)metal alkyl and amido derivatives with the amine-boranes NHR2BH3 (R2 = H2, Me2, HtBu). Treatment of the tris(trimethylsilylmethyl) complexes [M(η5-C5Me5)(CH2SiMe3)3] with NH3BH3 (3 equiv) gives the seven-coordinate species [M(η5-C5Me5)(NH2BH3)3] (M = Zr (1), Hf (2)) with three κ2N,H-NH2BH3 ligands. The tris(neophyl) [M(η5-C5Me5)(CH2CMe2Ph)3] or tris(dimethylamido) [M(η5-C5Me5)(NMe2)3] derivatives react with NHMe2BH3 (≥3 equiv) to afford bis(dimethylamidoborane) hydride complexes [M(η5-C5Me5)H(NMe2BH3)2] (M = Zr (3), Hf (4)) via thermally unstable [M(η5-C5Me5)(NMe2BH3)3] species. The reaction of [M(η5-C5Me5)(NMe2)3] and NH2tBuBH3 (≥4 equiv) affords analogous mixed amidoborane hydride derivatives [M(η5-C5Me5)H(NHtBuBH3)(NMe2BH3)] (M = Zr (5), Hf (6)) with κ2N,H-NHtBuBH3 and κ3N,H,H-NMe2BH3 ligands. The addition of NHR2BH3 (≥1 equiv) on the mono(dimethylamido) complexes [M(η5-C5Me5)Cl2(NMe2)] in hexane leads to the precipitation of the ionic compounds [(NHR2)2BH2][{M(η5-C5Me5)Cl2}2(μ-H)3] (R2 = Me2, M = Zr (7), Hf (8); R2 = HtBu, M = Zr (9), Hf (10)). Molecular hydride species [Cl2(η5-C5Me5)M(μ-Cl)(μ-H)2M(η5-C5Me5)Cl(NH2tBu)] (M = Zr (11), Hf (12)) could be isolated from mixtures of complexes [M(η5-C5Me5)Cl2(NMe2)] and lower ratios of NH2tBuBH3. The zirconium complex 11 decomposes in solution to give the mononuclear tert-butylamido derivative [Zr(η5-C5Me5)Cl2(NHtBu)] (13) along with other byproducts.

Synthesis of Dihydroquinoxalinones from Biomass-Derived Keto Acids and o-Phenylenediamines

A novel catalyst-free cascade amination/cyclization/reduction reaction was developed for the synthesis of various Dihydroquinoxalinones under mild conditions from accessible biomass-derived keto acids and 1,2-phenylenediamines with ammonia borane as a hydrogen donor. This single-step approach enables a simple and eco-friendly route toward the direct synthesis of 12 kinds of Dihydroquinoxalinones in moderate to excellent yields in the green solvent dimethyl carbonate. The results of deuterium-labeling experiments and density function calculations demonstrate that the reductive process proceeds along a double hydrogen transfer pathway. An acceptable yield of Dihydroquinoxalinone can be afforded in a gram-scale experiment, illustrating the practicality of the as-reported reaction system.

Amine-functionalized Schiff base covalent organic frameworks supported PdAuIr nanoparticles as high-performance catalysts for formic acid dehydrogenation and hexavalent chromium reduction

Formic acid (FA) holds significant potential as a liquid hydrogen storage medium. However, it is important to improve the reaction rates and extend the practical applications of FA dehydrogenation and Cr(VI) reduction through the development of efficient heterogeneous catalysts. This study reports the synthesis of a uniformly dispersed PdAuIr nanoparticles (NPs) catalyst loaded with amine groups covalent organic frameworks (COFs). The alloyed NPs demonstrated exceptional effectiveness in FA dehydrogenation rate and Cr(VI) reduction. The initial turnover of frequency (TOF) value for FA dehydrogenation without additives was 9970 h-1 at 298 K, the apparent activation energy (Ea) was 30.3 kJ/mol and the rate constant (k) for Cr(VI) reduction was 0.742 min-1. Additionally, it showcased the ability to undergo recycling up to six times with minimal degradation in performance. The results indicate that its remarkable catalytic performance can be attributed primarily to the favorable mass transfer attributes of the aminated COFs supports, the strong metal-support interaction (SMSI), and the synergistic effects among the metals. This study offers a novel perspective on the advancement of efficient and durable heterogeneous catalysts with diverse capabilities, thereby making significant contributions to the fields of energy and environmental preservation.

Two active species from a single metal halide precursor: a case study of highly productive Mn-catalyzed dehydrogenation of amine-boranes via intermolecular bimetallic cooperation

Metal-metal cooperation for inert bond activation is a ubiquitous concept in coordination chemistry and catalysis. While the great majority of such transformations proceed via intramolecular mode in binuclear complexes, to date only a few examples of intermolecular small molecule activation using usually bimetallic frustrated Lewis pairs (Mδ+⋯M'δ-) have been reported. We introduce herein an alternative approach for the intermolecular bimetallic cooperativity observed in the catalytic dehydrogenation of amine-boranes, in which the concomitant activation of N-H and B-H bonds of the substrate via the synergetic action of Lewis acidic (M+) and basic hydride (M-H) metal species derived from the same mononuclear complex (M-Br). It was also demonstrated that this system generated in situ from the air-stable Mn(i) complex fac-[(CO)3(bis(NHC))MnBr] and NaBPh4 shows high activity for H2 production from several substrates (Me2NHBH3, tBuNH2BH3, MeNH2BH3, NH3BH3) at low catalyst loading (0.1% to 50 ppm), providing outstanding efficiency for Me2NHBH3 (TON up to 18 200) that is largely superior to all known 3d-, s-, p-, f-block metal derivatives and frustrated Lewis pairs (FLPs). These results represent a step forward towards more extensive use of intermolecular bimetallic cooperation concepts in modern homogeneous catalysis.

Selective and efficient H2 evolution upon NH3BH3 hydrolysis at subzero temperatures

In the winter months, the temperature in most of the Earth stays below 0°C; the average temperature in winter at the South Pole is about -60°C. Therefore, it is urgent to develop efficient catalytic systems for selective and efficient H2 evolution upon NH3BH3 hydrolysis at subzero temperatures. For solving the freezing issue of water at below 0°C, herein, we have employed a facile and surfactant-free approach to synthesize M-Pt/C nanocomposites (M = Pd, Rh, Ru, Ni, Cu, or Fe), by the alloying of commercial Pt/C with Pd, Rh, Ru, Cu, Ni, or Fe for selective and efficient H2 evolution upon NH3BH3 hydrolysis in saline solution at below 0°C, even at -15°C. In addition, NH3BH3 hydrolysis over Pd-Pt/C in the saturated NaCl solution is utilized not only for safe hydrogen production but also for its in situ hydrogenation reduction in organic chemistry, which could avoid using dangerous hydrogen cylinders.

Selective dehydrogenation of ammonia borane to polycondensated BN rings catalysed by ruthenium olefin complexes

Dehydrogenation of ammonia borane to well-defined products is an important but challenging reaction. A dinuclear ruthenium complex with a Ru-Ru bond bearing a diazadiene (dad) unit and olefins as non-innocent ligands catalyzes the highly selective formation of conjugated polycondensed borazine oligomers (BxNxHy), predominantly B21N21H18, the BN analogue of superbenzene.

Catalyst-Free Transfer Hydrogenation from Amine-Borane Small Oligomers

Amine-borane dimers and oligomers with varied steric and electronic profiles were prepared via capping agent-controlled AA/BB polycondensations. They were used for transfer hydrogenations to aldehydes, ketones, imines as well as electron-poor alkene/alkyne moieties. The amine-borane Lewis-paired oligomers and the congested bis(amine-borane)s provided the highest yields. This was likely helped by facilitated dissociation (oligomers) or H-bond assistance. In the case of the oligomers, the second equivalent of H2 present was also engaged in the reaction. Solid-state NMR characterization provides evidence that the boron-containing materials obtained after transfer dehydrogenation are highly similar to those obtained from thermal dehydrogenation. The oligomers bridge the gap between simple amine-borane molecular reductants and the poly-amine-boranes and provide a full picture of the reactivity changes at the different scales.

Advances in Group VI Metal-Catalyzed Homogeneous Hydrogenation and Dehydrogenation Reactions

Transition metal-catalyzed homogeneous hydrogenation and dehydrogenation reactions for attaining plethora of organic scaffolds have evolved as a key domain of research in academia and industry. These protocols are atom-economic, greener, in line with the goal of sustainability, eventually pave the way for numerous novel environmentally benign methodologies. Appealing progress has been achieved in the realm of homogeneous catalysis utilizing noble metals. Owing to their high cost, less abundance along with toxicity issues led the scientific community to search for sustainable alternatives. In this context, earth- abundant base metals have gained substantial attention culminating enormous progress in recent years, predominantly with pincer-type complexes of nickel, cobalt, iron, and manganese. In this regard, group VI chromium, molybdenum and tungsten complexes have been overlooked and remain underdeveloped despite their earth-abundance and bio-compatibility. This review delineates a comprehensive overview in the arena of homogeneously catalysed (de)hydrogenation reactions using group VI base metals chromium, molybdenum, and tungsten till date. Various reactions have been described; hydrogenation, transfer hydrogenation, dehydrogenation, acceptorless dehydrogenative coupling, hydrogen auto transfer, along with their scope and brief mechanistic insights.

Boosting the Catalytic Performance of NiMoO4 Nanorods in H2 Generation upon NH3BH3 Hydrolysis via a Reduction Process

Although a range of noble metal catalysts, including Ru, Rh, Pd, Pt, and Au, have been developed for efficient H2 generation upon NH3BH3 hydrolysis at room temperature, this is a highly urgent need for exploring earth-abundant metal nanocatalysts for H2 generation upon NH3BH3 hydrolysis. Herein, a NaBH4 reduction strategy was developed to boost the catalytic performance of NiMoO4 nanorods in H2 generation upon NH3BH3 hydrolysis. Indeed, the pristine NiMoO4 nanorods were catalytically inert in NH3BH3 hydrolysis. Significantly, the reduced NiMoO4 nanorods presented excellent catalytic activity in H2 generation upon NH3BH3 hydrolysis, with a turnover frequency (TOF) of 31.2 L(H2)·gcat-1·h-1. Interestingly, the TOF of NH3BH3 hydrolysis over reduced NiMoO4 nanorods significantly increased from 31.2 to 53.6 L(H2)·gcat-1·h-1 under 0.3 M NaOH. The boosting catalytic performance of NiMoO4 nanorods via NaBH4 reduction in H2 generation might be attributed to the higher content of Oads and the formation of nickel boride in the reduced NiMoO4 nanorods. In this work, NH3BH3 hydrolysis over reduced NiMoO4 nanorods was not only used for safe H2 generation but also for its in situ tandem hydrogenation in organic chemistry.

Facile construction of robust Ru-Co3O4 Mott-Schottky catalyst enabling efficient dehydrogenation of ammonia borane for hydrogen generation

Developing efficient catalysts for the dehydrogenation of ammonia borane (AB) is important for the safe storage and controlled release of hydrogen, but it is a challenging task. In this study, we designed a robust Ru-Co₃O₄ catalyst using the Mott-Schottky effect to induce favorable charge rearrangement. The self-created electron-rich Co₃O₄ and electron-deficient Ru sites at heterointerfaces are indispensable for the activation of the B-H bond in NH₃BH₃ and the OH bond in H₂O, respectively. The synergistic electronic interaction between the electron-rich Co₃O₄ and electron-deficient Ru sites at the heterointerfaces resulted in an optimal Ru-Co₃O₄ heterostructure that exhibited outstanding catalytic activity for the hydrolysis of AB in the presence of NaOH. The heterostructure had an extremely high hydrogen generation rate (HGR) of 12238 mL min^-1 g_cat^-1 and an expected high turnover frequency (TOF) of 755 mol_H2 mol_Ru^-1 min^-1 at 298 K. The activation energy needed for the hydrolysis was low (36.65 kJ mol^-1). This study opens up a new avenue for the rational design of high-performance catalysts for AB dehydrogenation based on the Mott-Schottky effect.

Recent Advances and Perspectives on Supported Catalysts for Heterogeneous Hydrogen Production from Ammonia Borane

Ammonia borane (AB), a liquid hydrogen storage material, has attracted increasing attention for hydrogen utilization because of its high hydrogen content. However, the slow kinetics of AB hydrolysis and the indefinite catalytic mechanism remain significant problems for its large-scale practical application. Thus, the development of efficient AB hydrolysis catalysts and the determination of their catalytic mechanisms are significant and urgent. A summary of the preparation process and structural characteristics of various supported catalysts is presented in this paper, including graphite, metal-organic frameworks (MOFs), metal oxides, carbon nitride (CN), molybdenum carbide (MoC), carbon nanotubes (CNTs), boron nitride (h-BN), zeolites, carbon dots (CDs), and metal carbide and nitride (MXene). In addition, the relationship between the electronic structure and catalytic performance is discussed to ascertain the actual active sites in the catalytic process. The mechanism of AB hydrolysis catalysis is systematically discussed, and possible catalytic paths are summarized to provide theoretical considerations for the designing of efficient AB hydrolysis catalysts. Furthermore, three methods for stimulating AB from dehydrogenation by-products and the design of possible hydrogen product-regeneration systems are summarized. Finally, the remaining challenges and future research directions for the effective development of AB catalysts are discussed.

Synergistic interface between metal Cu nanoparticles and CoO for highly efficient hydrogen production from ammonia borane

The development of efficient non-noble metal catalysts for the dehydrogenation of hydrogen (H₂) storage materials is highly desirable to enable the global production and storage of H₂ energy. In this study, Cu _x -(CoO)_1-x /TiO₂ catalysts with a Cu-CoO interface supported on TiO₂ are shown to exhibit high catalytic efficiency for ammonia borane (NH₃BH₃) hydrolysis to generate H₂. The best catalytic activity was observed for a catalyst with a Cu : Co molar ratio of 1 : 1. The highest dehydrogenation turnover frequency (TOF) of 104.0 mol_H2 mol_metal ^-1 min^-1 was observed in 0.2 M NaOH at room temperature, surpassing most of the TOFs reported for non-noble catalysts for NH₃BH₃ hydrolysis. Detailed characterisation of the catalysts revealed electronic interactions at the Cu-CoO heterostructured interface of the catalysts. This interface provides bifunctional synergetic sites for H₂ generation, where activation and adsorption of NH₃BH₃ and H₂O are accelerated on the surface of Cu and CoO, respectively. This study details an effective method of rationally designing non-noble metal catalysts for H₂ generation via a metal and transition-metal oxide interface.

Dynamic effects on ligand field from rapid hydride motion in an iron(ii) dimer with an S = 3 ground state

Hydride complexes are important in catalysis and in iron-sulfur enzymes like nitrogenase, but the impact of hydride mobility on local iron spin states has been underexplored. We describe studies of a dimeric diiron(ii) hydride complex using X-ray and neutron crystallography, Mössbauer spectroscopy, magnetism, DFT, and ab initio calculations, which give insight into the dynamics and the electronic structure brought about by the hydrides. The two iron sites in the dimer have differing square-planar (intermediate-spin) and tetrahedral (high-spin) iron geometries, which are distinguished only by the hydride positions. These are strongly coupled to give an S total = 3 ground state with substantial magnetic anisotropy, and the merits of both localized and delocalized spin models are discussed. The dynamic nature of the sites is dependent on crystal packing, as shown by changes during a phase transformation that occurs near 160 K. The change in dynamics of the hydride motion leads to insight into its influence on the electronic structure. The accumulated data indicate that the two sites can trade geometries by rotating the hydrides, at a rate that is rapid above the phase transition temperature but slow below it. This small movement of the hydrides causes large changes in the ligand field because they are strong-field ligands. This suggests that hydrides could be useful in catalysis not only due to their reactivity, but also due to their ability to rapidly modulate the local electronic structure and spin states at metal sites.

Synthesis: Molecular Structure, Thermal-Calorimetric and Computational Analyses, of Three New Amine Borane Adducts

Cyclopropylamine borane C₃H₅NH₂BH₃ (C3AB), 2-ethyl-1-hexylamine borane CH₃(CH₂)₃CH(C₂H₅)CH₂NH₂BH₃ (C2C6AB) and didodecylamine borane (C₁₂H₂₅)₂NHBH₃ ((C12)2AB) are three new amine borane adducts (ABAs). They are synthesized by reaction of the corresponding amines with a borane complex, the reaction being exothermic as shown by Calvet calorimetry. The successful synthesis of each has been demonstrated by FTIR, Raman and NMR. For instance, the ¹¹B NMR spectra show the presence of signals typical of the NBH₃ environment, thereby implying the formation of B-N bonds. The occurrence of dihydrogen bonds (DHBs) for each of the ABAs has been highlighted by DSC and FTIR, and supported by DFT calculations (via the Mulliken charges for example). When heated, the three ABAs behave differently: C3AB and C2C6AB decompose from 68 to 100 °C whereas (C12)2AB is relatively stable up to 173 °C. That means that these ABAs are not appropriate as hydrogen carriers, but the 'most' stable (C12)2AB could open perspectives for the synthesis of advanced materials.

Cp* non-innocence and the implications of (η4-Cp*H)Rh intermediates in the hydrogenation of CO2, NAD+, amino-borane, and the Cp* framework - a computational study

In hydrogenation mediated by half-sandwich complexes of Rh, Cp*Rh(III)-H intermediates are critical hydride-delivery agents. For bipyridine-supported complexes, a unique transformation named 'Cp* non-innocence' leads to the appearance of (Cp*H)Rh(I) intermediates, which are purported to exhibit enhanced hydride-delivery capabilities. In this work, DFT calculations performed to compare the role of these complexes in hydrogenation reveal that (Cp*H)Rh(I) intermediates do not compete with the conventional pathway (involving Cp*Rh(III)-H); instead they can lead to sequential hydrogenation of the Cp* framework, and potentially, catalyst degradation. Thus, caution is warranted when invoking the truly homogeneous nature of hydrogenation catalysis mediated by this popular class of complexes.

Substrate-Gated Transformation of a Pre-Catalyst into an Iron-Hydride Intermediate [(NO)2(CO)Fe(μ-H)Fe(CO)(NO)2]- for Catalytic Dehydrogenation of Dimethylamine Borane

Continued efforts are made on the development of earth-abundant metal catalysts for dehydrogenation/hydrolysis of amine boranes. In this study, complex [K-18-crown-6-ether][(NO)₂Fe(μ-^MePyr)(μ-CO)Fe(NO)₂] (3-K-crown, ^MePyr = 3-methylpyrazolate) was explored as a pre-catalyst for the dehydrogenation of dimethylamine borane (DMAB). Upon evolution of H_2(g) from DMAB triggered by 3-K-crown, parallel conversion of 3-K-crown into [(NO)₂Fe(N,N'-^MePyrBH₂NMe₂)]^- (5) and an iron-hydride intermediate [(NO)₂(CO)Fe(μ-H)Fe(CO)(NO)₂]^- (A) was evidenced by X-ray diffraction/nuclear magnetic resonance/infrared/nuclear resonance vibrational spectroscopy experiments and supported by density functional theory calculations. Subsequent transformation of A into complex [(NO)₂Fe(μ-CO)₂Fe(NO)₂]^- (6) is synchronized with the deactivated generation of H_2(g). Through reaction of complex [Na-18-crown-6-ether][(NO)₂Fe(η²-BH₄)] (4-Na-crown) with CO_(g) as an alternative synthetic route, isolated intermediate [Na-18-crown-6-ether][(NO)₂(CO)Fe(μ-H)Fe(CO)(NO)₂] (A-Na-crown) featuring catalytic reactivity toward dehydrogenation of DMAB supports a substrate-gated transformation of a pre-catalyst [(NO)₂Fe(μ-^MePyr)(μ-CO)Fe(NO)₂]^- (3) into the iron-hydride species A as an intermediate during the generation of H_2(g).

Mechanistic insights into H3B·NMeH2 dehydrogenation by Co-based complexes: a DFT perspective

Mechanistic insights into Co-catalyzed H3B·NMeH2 dehydrogenation and polyaminoborane formation are carefully investigated using density functional theory.

Tandem reduction and trifluoroethylation of quinolines and quinoxalines with trifluoroacetic acid and trimethylamine borane

A metal-free tandem reduction and N-trifluoroethylation of quinolines and quinoxalines has been developed. It provided a convenient route to access trifluoroethylated tetrahydroquinolines and tetrahydroquinoxalines. This one-pot method avoids the purification process of the intermediate. Mechanistically, the in situ-generated boryl acetal species reacted with tetrahydroquinolines to generate iminiums followed by reduction to give the target compounds.

Theoretical Study of Hydrogen Production from Ammonia Borane Catalyzed by Metal and Non-Metal Diatom-Doped Cobalt Phosphide

The decomposition of ammonia borane (NH3BH3) to produce hydrogen has developed a promising technology to alleviate the energy crisis. In this paper, metal and non-metal diatom-doped CoP as catalyst was applied to study hydrogen evolution from NH3BH3 by density functional theory (DFT) calculations. Herein, five catalysts were investigated in detail: pristine CoP, Ni- and N-doped CoP (CoPNi-N), Ga- and N-doped CoP (CoPGa-N), Ni- and S-doped CoP (CoPNi-S), and Zn- and S-doped CoP (CoPZn-S). Firstly, the stable adsorption structure and adsorption energy of NH3BH3 on each catalytic slab were obtained. Additionally, the charge density differences (CDD) between NH3BH3 and the five different catalysts were calculated, which revealed the interaction between the NH3BH3 and the catalytic slab. Then, four different reaction pathways were designed for the five catalysts to discuss the catalytic mechanism of hydrogen evolution. By calculating the activation energies of the control steps of the four reaction pathways, the optimal reaction pathways of each catalyst were found. For the five catalysts, the optimal reaction pathways and activation energies are different from each other. Compared with undoped CoP, it can be seen that CoPGa-N, CoPNi-S, and CoPZn-S can better contribute hydrogen evolution from NH3BH3. Finally, the band structures and density of states of the five catalysts were obtained, which manifests that CoPGa-N, CoPNi-S, and CoPZn-S have high-achieving catalytic activity and further verifies our conclusions. These results can provide theoretical references for the future study of highly active CoP catalytic materials.

Dehydropolymerization of H3B·NMeH2 Mediated by Cationic Iridium(III) Precatalysts Bearing κ3-iPr-PNRP Pincer Ligands (R = H, Me): An Unexpected Inner-Sphere Mechanism

The dehydropolymerization of H₃B·NMeH₂ to form N-methylpolyaminoborane using neutral and cationic catalysts based on the {Ir(ⁱPr-PN^HP)} fragment [ⁱPr-PN^HP = κ³-(CH₂CH₂PⁱPr₂)₂NH] is reported. Neutral Ir(ⁱPr-PN^HP)H₃ or Ir(ⁱPr-PN^HP)H₂Cl precatalysts show no, or poor and unselective, activity respectively at 298 K in 1,2-F₂C₆H₄ solution. In contrast, addition of [NMeH₃][BAr^F₄] (Ar^F = 3,5-(CF₃)₂C₆H₃) to Ir(ⁱPr-PN^HP)H₃ immediately starts catalysis, suggesting that a cationic catalytic manifold operates. Consistent with this, independently synthesized cationic precatalysts are active (tested between 0.5 and 2.0 mol % loading) producing poly(N-methylaminoborane) with M_n ∼ 40,000 g/mol, Đ ∼1.5, i.e., dihydrogen/dihydride, [Ir(ⁱPr-PN^HP)(H)₂(H₂)][BAr^F₄]; σ-amine-borane [Ir(ⁱPr-PN^HP)(H)₂(H₃B·NMe₃)][BAr^F₄]; and [Ir(ⁱPr-PN^HP)(H)₂(NMeH₂)][BAr^F₄]. Density functional theory (DFT) calculations probe hydride exchange processes in two of these complexes and also show that the barrier to amine-borane dehydrogenation is lower (22.5 kcal/mol) for the cationic system compared with the neutral system (24.3 kcal/mol). The calculations show that the dehydrogenation proceeds via an inner-sphere process without metal–ligand cooperativity, and this is supported experimentally by N–Me substituted [Ir(ⁱPr-PN^MeP)(H)₂(H₃B·NMe₃)][BAr^F₄] being an active catalyst. Key to the lower barrier calculated for the cationic system is the outer-sphere coordination of an additional H₃B·NMeH₂ with the N–H group of the ligand. Experimentally, kinetic studies indicate a complex reaction manifold that shows pronounced deceleratory temporal profiles. As supported by speciation and DFT studies, a key observation is that deprotonation of [Ir(ⁱPr-N^HP)(H)₂(H₂)][BAr^F₄], formed upon amine-borane dehydrogenation, by the slow in situ formation of NMeH₂ (via B–N bond cleavage), results in the formation of essentially inactive Ir(ⁱPr-PN^HP)H₃, with a coproduct of [NMeH₃]⁺/[H₂B(NMeH₂)₂]⁺. While reprotonation of Ir(ⁱPr-PN^HP)H₃ results in a return to the cationic cycle, it is proposed, supported by doping experiments, that reprotonation is attenuated by entrainment of the [NMeH₃]⁺/[H₂B(NMeH₂)₂]⁺/catalyst in insoluble polyaminoborane. The role of [NMeH₃]⁺/[H₂B(NMeH₂)]⁺ as chain control agents is also noted.

Switchable Reductive N-Trifluoroethylation and N-Trifluoroacetylation of Indoles with Trifluoroacetic Acid and Trimethylamine Borane

The metal-free reductive N-trifluoroethylation and N-trifluoroacetylation of indoles have been developed. Bench stable and inexpensive trimethylamine borane and trifluoroacetic acid (TFA) were utilized as the reductive and fluorinating reagents, respectively. These transformations were switchable on the basis of altering the loading of trimethylamine borane and TFA. Preliminary experiments indicated indoline was the common intermediate in these two transformations.

Reactions of an Osmium-Hexahydride Complex with 2-Butyne and 3-Hexyne and Their Performance in the Migratory Hydroboration of Aliphatic Internal Alkynes

Reactions of the hexahydride OsH₆(PⁱPr₃)₂ (1) with 2-butyne and 3-hexyne and the behavior of the resulting species toward pinacolborane (pinBH) have been investigated in the search for new hydroboration processes. Complex 1 reacts with 2-butyne to give 1-butene and the osmacyclopropene OsH₂(η²-C₂Me₂)(PⁱPr₃)₂ (2). In toluene, at 80 °C, the coordinated hydrocarbon isomerizes into a η⁴-butenediyl form to afford OsH₂(η⁴-CH₂CHCHCH₂)(PⁱPr₃)₂ (3). Isotopic labeling experiments indicate that the isomerization involves Me-to-C_Os hydrogen 1,2-shifts, which take place through the metal. The reaction of 1 with 3-hexyne gives 1-hexene and OsH₂(η²-C₂Et₂)(PⁱPr₃)₂ (4). Similarly to 2, complex 4 evolves to η⁴-butenediyl derivatives OsH₂(η⁴-CH₂CHCHCHEt)(PⁱPr₃)₂ (5) and OsH₂(η⁴-MeCHCHCHCHMe)(PⁱPr₃)₂ (6). In the presence of pinBH, complex 2 generates 2-pinacolboryl-1-butene and OsH{κ²-H,H-(H₂Bpin)}(η²-HBpin)(PⁱPr₃)₂ (7). According to the formation of the borylated olefin, complex 2 is a catalyst precursor for the migratory hydroboration of 2-butyne and 3-hexyne to 2-pinacolboryl-1-butene and 4-pinacolboryl-1-hexene. During the hydroboration, complex 7 is the main osmium species. The hexahydride 1 also acts as a catalyst precursor, but it requires an induction period that causes the loss of 2 equiv of alkyne per equiv of osmium.

Unraveling the Mechanistic Details of Ru-Bis(pyridyl)borate Complex Catalyst for the Dehydrogenation of Ammonia Borane

Ru-Bis(pyridyl)borate complex (CAT) is an efficient catalyst for ammonia borane (AB) dehydrogenation. Although the mechanistic pathway of this catalyst has been theoretically investigated previously, the gap between the experimental findings and the computational results could not be bridged thus far. In our study, using density functional theory calculations, we elucidate the mechanism of AB dehydrogenation of CAT at a variable degree of ligand hydrogenation. Our results confirm that the acetonitrile ligands get reduced in the presence of AB and remain hydrogenated. Moreover, in line with experiments, we find that AB dehydrogenation on CAT proceeds via a concerted mechanism (with the free energy energetic span between 25.4 and 32.5 kcal/mol). We find that the ligand reduction alters the electronic structure and activity of CAT and the highest activity of the catalyst is expected at the fifth degree of hydrogenation of ligands with an energetic span of 25.4 kcal/mol. Additionally, the mechanism for the removal of molecular H₂ from the catalysts also alters with the degree of ligand hydrogenation. Furthermore, our results show that optimal H₂ binding free energy calculations can be used as a descriptor to identify the most active sites. Finally, this work demonstrates that ligand reduction improves the activity of the catalyst. These results highlight the importance of ligand hydrogenation in probing the activity and operating mechanism of the Ru-bis(pyridyl)borate complexes for AB dehydrogenation. Further, we identify a plausible dimer structure and rationalized experimental observation that the deactivation chemistry of this catalyst is different from the Shvo's catalyst.

Enhanced Effect of an External Electric Field on NH3BH3 Dehydrogenation: an AIMD Study for Thermolysis

How to improve the dehydrogenation properties of ammonia borane (AB, NH₃BH₃) is always a challenge for its practical application in hydrogen storage. In this study, we reveal the enhanced effect of an external electric field (E _ext) on AB dehydrogenation by means of the ab initio molecular dynamics method. The molecular rotation induced by an electrostatic force can facilitate the formation of the H-N···B-H framework, which would aggregate into poly-BN species and further suppress the generation of the volatile byproducts. Meanwhile, the dihydrogen bond (N-H^δ+···^δ-H-B) is favorably formed under E _ext, and the interaction between relevant H atoms is enhanced, leading to a faster H₂ liberation. Correspondingly, the apparent activation energy for AB dissociation is greatly reduced from 18.42 to around 15 kcal·mol^-1 with the application of an electric field, while that for H₂ formation decreases from 20.4 to about 16 kcal·mol^-1. In the whole process, the cleavage of the B-H bond is more favorable than that of the N-H bond, no matter whether the application of E _ext. Our results give a deep insight into a positive effect of an electric field on AB dehydrogenation, which would provide an important inspiration for hydrogen storage in industry applications.

Functional Group Regulated Ni/Ti3C2Tx (Tx = F, -OH) Holding Bimolecular Activation Tunnel for Enhanced Ammonia Borane Hydrolysis

Developing economical and efficient catalyst for hydrogen generation from ammonia borane (AB) hydrolysis is still a huge challenge. As an alternative strategy, the functional group regulation of metal nanoparticles (NPs)-based catalysts is believed to be capable of improving the catalytic activity. Herein, a series of Ni/Ti₃C₂T_x-Y (T_x = F, -OH; Y denotes etching time (d)) catalysts are synthesized and show remarkably enhanced catalytic activity on the hydrolysis of AB in contrast to the corresponding without regulating. The optimized Ni/Ti₃C₂T_x-4 with a turnover frequency (TOF) value of 161.0 min^-1 exhibits the highest catalytic activity among the non-noble monometallic-based catalyst. Experimental results and theory calculations demonstrate that the excellent catalytic activity benefits from the bimolecular activation channels formed by Ni NPs and Ti₃C₂T_x-Y. H₂O and AB molecules are activated simultaneously in the bimolecular activation tunnel. Bimolecular activation reduces the activation energy of AB hydrolysis, and hydrogen generation rate is promoted. This article provides a new approach to design effective catalysts and further supports the bimolecular activation model for the hydrolysis of AB.

Natural Wood-Based Catalytic Membrane Microreactors for Continuous Hydrogen Generation

The development of controlled processes for continuous hydrogen generation from solid-state storage chemicals such as ammonia borane is central to integrating renewable hydrogen into a clean energy mix. However, to date, most reported platforms operate in batch mode, posing a challenge for controllable hydrogen release, catalyst reusability, and large-scale operation. To address these issues, we developed flow-through wood-based catalytic microreactors, characterized by inherent natural oriented microchannels. The prepared structured catalysts utilize silver-promoted palladium nanoparticles supported on metal-organic framework (MOF)-coated wood microreactors as the active phase. Catalytic tests demonstrate their highly controllable hydrogen production in continuous mode, and by adjusting the ammonia borane flow and wood species, we reach stable productivities of up to 10.4 cm_H2³ min^-1 cm_cat^-3. The modular design of the structured catalysts proves readily scalable. Our versatile approach is applicable for other metals and MOF combinations, thus comprising a sustainable and scalable platform for catalytic dehydrogenations and applications in the energy-water nexus.

Catalytic and mechanistic studies of a highly active and E-selective Co(II) PNNH pincer catalyst system for transfer-semihydrogenation of internal alkynes

Herein we report the application of a Co(II) PNNH pincer catalyst system (PNNH = 2-(5-(t-butyl)-1H-pyrazol-3-yl)-6-(dialkylphosphinomethyl)pyridine) for the highly E-selective transfer semihydrogenation of internal diaryl alkynes using methanol and ammonia borane...

Design and synthesis of stable four-coordinated benzotriazole-borane with tunable fluorescence emission

A new class of stable four-coordinated benzotriazole-borane compounds was developed via gold-catalyzed alkyne hydroboration. The application of polymeric (BH₂CN)_n reagent gave the formation of cyano-amine-boranes (CAB) complexes with less basic N-heterocyclic amines and anilines. Various new CABs were investigated in catalytic hydroboration to synthesize N–B cycles. The 1,2,3-benzotriazoles were identified as the only feasible N-source, giving the four coordinated borane N–B cycles (BTAB) in excellent yields (up to 90%) with good functional group tolerability. This new class of polycyclic N–B compounds showed excellent stability toward acid, base, high temperature, and photo-irradiation. The facile synthesis, excellent stability, strong and tunable fluorescence emission make BTAB interesting new fluorescent probes for future chemical and biological applications.

A new class of benzotriazole-boranes was developed via gold-catalyzed alkyne hydroboration. The facile synthesis, excellent stability, strong and tunable fluorescence emission make BTAB new fluorescent probes for chemical and biological applications.

Chemoselective reduction of α,β-unsaturated ketones to allylic alcohols under catalyst-free conditions

A strategy of chemoselective reduction of α, β-unsaturated ketones was developed in our group. H3N·BH3 would prefer to coordinate with CO bond, forming six-membered ring, and ketones were hydrogenated via concerted double-hydrogen-transfer process.

Homogeneous catalysis with polyhydride complexes

This review analyzes the role of transition metal polyhydrides as homogeneous catalysts for organic reactions. Discussed reactions involve nearly every main organic functional group.

Hydrolytic Dehydrogenation of Ammonia Borane in Neat Water Using Recyclable Zeolite-Supported Cyclic Alkyl Amino Carbene (CAAC)-Ru Catalysts

Cyclic alkyl amino mono- and biscarbene ruthenium (CAAC-Ru) complexes were immobilized on mesoporous Y zeolite (catalysts 3 and 4) and showed high activity and stability in ammonia borane (AB) hydrolytic...

Amine-boranes reactions promoted by lanthanide(II) ions

The catalytic activity in amine-borane dehydrogenation is shown for the first time for Ln(II) species using complexes [{(p-tBu-C₆H₄)₂CH}₂M·L] (M = Yb, Sm, L = (DME)₂, TMEDA). The protonation of M(II)-C bonds with HNR¹R²BH₃ affords amidoborane complexes [M(NR¹R²BH₃)₂L], which under excess HNMe₂BH₃ transform to [NMe₂BH₂NMe₂BH₃]^- derivatives, both serving as the dehydrocoupling intermediates.

Controlled Synthesis of Well-Defined Polyaminoboranes on Scale Using a Robust and Efficient Catalyst

The air tolerant precatalyst, [Rh(L)(NBD)]Cl ([1]Cl) [L = κ³-(ⁱPr₂PCH₂CH₂)₂NH, NBD = norbornadiene], mediates the selective synthesis of N-methylpolyaminoborane, (H₂BNMeH)_n, by dehydropolymerization of H₃B·NMeH₂. Kinetic, speciation, and DFT studies show an induction period in which the active catalyst, Rh(L)H₃ (3), forms, which sits as an outer-sphere adduct 3·H₃BNMeH₂ as the resting state. At the end of catalysis, dormant Rh(L)H₂Cl (2) is formed. Reaction of 2 with H₃B·NMeH₂ returns 3, alongside the proposed formation of boronium [H₂B(NMeH₂)₂]Cl. Aided by isotopic labeling, Eyring analysis, and DFT calculations, a mechanism is proposed in which the cooperative "PNHP" ligand templates dehydrogenation, releasing H₂B═NMeH (ΔG^‡_calc = 19.6 kcal mol^-1). H₂B═NMeH is proposed to undergo rapid, low barrier, head-to-tail chain propagation for which 3 is the catalyst/initiator. A high molecular weight polymer is formed that is relatively insensitive to catalyst loading (M_n ∼71 000 g mol^-1; Đ, of ∼ 1.6). The molecular weight can be controlled using [H₂B(NMe₂H)₂]Cl as a chain transfer agent, M_n = 37 900-78 100 g mol^-1. This polymerization is suggested to arise from an ensemble of processes (catalyst speciation, dehydrogenation, propagation, chain transfer) that are geared around the concentration of H₃B·NMeH₂. TGA and DSC thermal analysis of polymer produced on scale (10 g, 0.01 mol % [1]Cl) show a processing window that allows for melt extrusion of polyaminoborane strands, as well as hot pressing, drop casting, and electrospray deposition. By variation of conditions in the latter, smooth or porous microstructured films or spherical polyaminoboranes beads (∼100 nm) result.

Ammonia-Borane Dehydrogenation Catalyzed by Dual-Mode Proton-Responsive Ir-CNNH Complexes

Metal complexes incorporating proton-responsive ligands have been proved to be superior catalysts in reactions involving the H₂ molecule. In this contribution, a series of Ir^III complexes based on lutidine-derived CNN^H pincers containing N-heterocyclic carbene and secondary amino NHR [R = Ph (4a), tBu (4b), benzyl (4c)] donors as flanking groups have been synthesized and tested in the dehydrogenation of ammonia–borane (NH₃BH₃, AB) in the presence of substoichiometric amounts (2.5 equiv) of tBuOK. These preactivated derivatives are efficient catalysts in AB dehydrogenation in THF at room temperature, albeit significantly different reaction rates were observed. Thus, by using 0.4 mol % of 4a, 1.0 equiv of H₂ per mole of AB was released in 8.5 min (turnover frequency (TOF_50%) = 1875 h^–1), while complexes 4b and 4c (0.8 mol %) exhibited lower catalytic activities (TOF_50% = 55–60 h^–1). 4a is currently the best performing Ir^III homogeneous catalyst for AB dehydrogenation. Kinetic rate measurements show a zero-order dependence with respect to AB, and first order with the catalyst in the dehydrogenation with 4a (−d[AB]/dt = k[4a]). Conversely, the reaction with 4b is second order in AB and first order in the catalyst (−d[AB]/dt = k[4b][AB]²). Moreover, the reactions of the derivatives 4a and 4b with an excess of tBuOK (2.5 equiv) have been analyzed through NMR spectroscopy. For the former precursor, formation of the iridate 5 was observed as a result of a double deprotonation at the amine and the NHC pincer arm. In marked contrast, in the case of 4b, a monodeprotonated (at the pincer NHC-arm) species 6 is observed upon reaction with tBuOK. Complex 6 is capable of activating H₂ reversibly to yield the trihydride derivative 7. Finally, DFT calculations of the first AB dehydrogenation step catalyzed by 5 has been performed at the DFT//MN15 level of theory in order to get information on the predominant metal–ligand cooperation mode.

Iridium complexes based on CNN^H ligands containing two potential proton-responsive sites—a lutidine scaffold and a secondary amino group—have been tested in the dehydrogenation of ammonia-borane. Upon reaction with base, depending on the amino group acidity, mono- or doubly deprotonated species exhibiting significantly different catalytic activities were observed.