Optical Properties of Secondary Organic Aerosol Produced by Nitrate Radical Oxidation of Biogenic Volatile Organic Compounds

Applying the total carbon-black carbon approach method to investigate the characteristics of primary and secondary carbonaceous aerosols in ambient PM2.5 in northern Taiwan

Ambient fine particulate matter (PM2.5) comprises a diverse array of carbonaceous species, and the impact of carbonaceous aerosols (CA) extends to both long-term and short-term effects on human health and the environment. Understanding the distinctive composition of CA is crucial for gaining insights into the origins of airborne particulate matter. Due to their diverse physicochemical properties and intricate heterogeneous reactions, CA often exhibits temporal and spatial variations. Ground-based and highly time-resolved apportionment methods play a vital role in discerning CA emissions. This study utilized high-time resolution data of total carbon (TC) and black carbon (BC) for CA apportionment in northern Taiwan. The advanced numerical model (TC-BC(λ)), coupled with continuous measurement data, facilitated CA allocation based on optical absorption characteristics, organic or elemental carbon composition, and the distinction between primary and secondary origins. Primary carbonaceous aerosols dominated the monitoring site, accounting for 67.5 % compared to the 32.5 % contribution from secondary forms of CA. The summer season exhibited a maximum increase in secondary organic aerosols (SOA) at 41.5 %. Diurnal variations for primary emissions, such as BCc and primary organic aerosols (POA), showed marked peaks for BCff and POAnon-abs during morning rush hours. In contrast, BCbb and POABrC displayed bimodal peaks with increased concentrations during evening hours. Conversely, SOA exhibited significantly different diurnal trends, with SOABrC peaking late at night due to aqueous phased reactions and a noontime peak of SOAnon-abs observed due to photo-oxidation processes. Furthermore, the study employed backward trajectory analysis and concentration-weighted trajectories (CWTs) to examine the long-range transport of CA, identifying potential sources, origins, and transport patterns of CA components to the receptor site in Taiwan during different seasons.

Long-term evolution of carbonaceous aerosols in PM2.5 during over a decade of atmospheric pollution outbreaks and control in polluted central China

Against the backdrop of an uncertain evolution of carbonaceous aerosols in polluted areas over the long term amid air pollution control measures, this 11-year study (2011-2021) investigated fine particulate matter (PM2.5) and carbonaceous components in polluted central China. Organic carbon (OC) and elemental carbon (EC) averaged 16.5 and 3.4 μg/m3, constituting 16 and 3 % of PM2.5 mass. Carbonaceous aerosols dominated PM2.5 (35 and 27 %) during periods of excellent and good air quality, while polluted days witnessed other components as dominants, with a significant decrease in primary organic aerosols and increased secondary pollution. From 2011 to 2021, OC and EC decreased by 53 and 76 %, displaying a high-value oscillation phase (2011-2015) and a low-value fluctuation phase (post-2016). A substantial reduction in high OC and EC concentrations in 2016 marked a milestone in significant air quality improvement attributed to effective control measures, especially targeting OC and EC, evident from their decreased proportion in PM2.5. Primary OC (POC) in winter exhibited the most pronounced reduction (8 % per year), and the seasonal disparities in PM2.5 and carbonaceous components were reduced, showcasing the effectiveness of control measures. Contrary to the more pronounced reduction of EC, which decreased in proportion to PM2.5, secondary OC (SOC) in PM2.5 exhibited an increasing trend. Along with rising OC/EC, SOC/OC, and SOC/EC ratios, this indicates a growing prominence of secondary pollution compared to the decrease in primary pollution. SOC shows an increasing trend with NO2 rise (r = 0.53), without O3 promoting SOC. Positive correlations of SOC with SO2, CO (r = 0.41, 0.59), also highlight their influence on atmospheric conditions, oxidative capacity, and chemical reactions, indirectly impacting SOC formation. The implementation of precise precursor emission reduction measures holds the key to future efforts in mitigating SOC pollution and reducing PM2.5 concentrations, thereby contributing to improved air quality.

Secondary Organic Aerosol Generated from Biomass Burning Emitted Phenolic Compounds: Oxidative Potential, Reactive Oxygen Species, and Cytotoxicity

Phenolic compounds are largely emitted from biomass burning (BB) and have a significant potential to form SOA (Phc-SOA). However, the toxicological properties of Phc-SOA remain unclear. In this study, phenol and guaiacol were chosen as two representative phenolic gases in BB plumes, and the toxicological properties of water-soluble components of their SOA generated under different photochemical ages and NOx levels were investigated. Phenolic compounds contribute greatly to the oxidative potential (OP) of biomass-burning SOA. OH-adducts of guaiacol (e.g., 2-methoxyhydroquinone) were identified as components of guaiacol SOA (GSOA) with high OP. The addition of nitro groups to 2,5-dimethyl-1,4-benzoquinone, a surrogate quinone compound in Phc-SOA, increased its OP. The toxicity of both phenol SOA (PSOA) and GSOA in vitro in human alveolar epithelial cells decreased with aging in terms of both cell death and cellular reactive oxygen species (ROS), possibly due to more ring-opening products with relatively low toxicity. The influence of NOx was consistent between cell death and cellular ROS for GSOA but not for PSOA, indicating that cellular ROS production does not necessarily represent all processes contributing to cell death caused by PSOA. Combining different acellular and cellular assays can provide a comprehensive understanding of aerosol toxicological properties.

Missing Measurements of Sesquiterpene Ozonolysis Rates and Composition Limit Understanding of Atmospheric Reactivity

Emissions of biogenic reactive carbon significantly influence atmospheric chemistry, contributing to the formation and destruction of secondary pollutants, such as secondary organic aerosol and ozone. While isoprene and monoterpenes are a major fraction of emissions and have been extensively studied, substantially less is known about the atmospheric impacts of higher-molecular-weight terpenes such as sesquiterpenes. In particular, sesquiterpenes have been proposed to play a significant role in ozone chemical loss due to the very high ozone reaction rates of certain isomers. However, relatively little data are available on the isomer-resolved composition of this compound class or its role in ozone chemistry. This study examines the chemical diversity of sesquiterpenes and availability of ozone reaction rate constants to evaluate the current understanding of their ozone reactivity. Sesquiterpenes are found to be highly diverse, with 72 different isomers reported and relatively few isomers that contribute a large mass fraction across all studies. For the small number of isomers with known ozone reaction rates, estimated rates may be 25 times higher or lower than measurements, indicating that estimated reaction rates are highly uncertain. Isomers with known ozone reaction rates make up approximately half of the mass of sesquiterpenes in concentration and emission measurements. Consequently, the current state of the knowledge suggests that the total ozone reactivity of sesquiterpenes cannot be quantified without very high uncertainty, even if isomer-resolved composition is known. These results are in contrast to monoterpenes, which are less diverse and for which ozone reaction rates are well-known, and in contrast to hydroxyl reactivity of monoterpenes and sesquiterpenes, for which reaction rates can be reasonably well estimated. Improved measurements of a relatively small number of sesquiterpene isomers would reduce uncertainties and improve our understanding of their role in regional and global ozone chemistry.

Formation of Chromophores from cis-Pinonaldehyde Aged in Highly Acidic Conditions

Sulfuric acid in the atmosphere can participate in acid-catalyzed and acid-driven reactions, including those within secondary organic aerosols (SOA). Previous studies have observed enhanced absorption at visible wavelengths and significant changes in the chemical composition when SOA was exposed to sulfuric acid. However, the specific chromophores responsible for these changes could not be identified. The goals of this study are to identify the chromophores and determine the mechanism of browning in highly acidified α-pinene SOA by following the behavior of specific common α-pinene oxidation products, namely, cis-pinonic acid and cis-pinonaldehyde, when they are exposed to highly acidic conditions. The products of these reactions were analyzed with ultra-performance liquid chromatography coupled with photodiode array spectrophotometry and high-resolution mass spectrometry, UV-vis spectrophotometry, and nuclear magnetic resonance spectroscopy. cis-Pinonic acid (2) was found to form homoterpenyl methyl ketone (4), which does not absorb visible radiation, while cis-pinonaldehyde (3) formed weakly absorbing 1-(4-(propan-2-ylidene)cyclopent-1-en-1-yl)ethan-1-one (5) and 1-(4-isopropylcyclopenta-1,3-dien-1-yl)ethan-1-one (6) via an acid-catalyzed aldol condensation. This chemistry could be relevant for environments characterized by high sulfuric acid concentrations, for example, during the transport of organic compounds from the lower to the upper atmosphere by fast updrafts.

Enhanced Light Absorption and Elevated Viscosity of Atmospheric Brown Carbon through Evaporation of Volatile Components

Samples of brown carbon (BrC) material were collected from smoke emissions originating from wood pyrolysis experiments, serving as a proxy for BrC representative of biomass burning emissions. The acquired samples, referred to as "pyrolysis oil (PO1)," underwent subsequent processing by thermal evaporation of their volatile compounds, resulting in a set of three additional samples with volume reduction factors of 1.33, 2, and 3, denoted as PO1.33, PO2, and PO3. The chemical compositions of these POx samples and their BrC chromophore features were analyzed using a high-performance liquid chromatography instrument coupled with a photodiode array detector and a high-resolution mass spectrometer. The investigation revealed a noteworthy twofold enhancement of BrC light absorption observed for the progression of PO1 to PO3 samples, assessed across the spectral range of 300-500 nm. Concurrently, a decrease in the absorption Ångstrom exponent (AAE) from 11 to 7 was observed, indicating a weaker spectral dependence. The relative enhancement of BrC absorption at longer wavelengths was more significant, as exemplified by the increased mass absorption coefficient (MAC) measured at 405 nm from 0.1 to 0.5 m2/g. Molecular characterization further supports this darkening trend, manifesting as a depletion of small oxygenated, less absorbing monoaromatic compounds and the retention of relatively large, less polar, more absorbing constituents. Noteworthy alterations of the PO1 to PO3 mixtures included a reduction in the saturation vapor pressure of their components and an increase in viscosity. These changes were quantified by the mean values shifting from approximately 1.8 × 103 μg/m3 to 2.3 μg/m3 and from ∼103 Pa·s to ∼106 Pa·s, respectively. These results provide quantitative insights into the extent of BrC aerosol darkening during atmospheric aging through nonreactive evaporation. This new understanding will inform the refinement of atmospheric and chemical transport models.

Surface Hydrogen Bond-Induced Oxygen Vacancies of TiO2 for Two-Electron Molecular Oxygen Activation and Efficient NO Oxidation

Defect engineering can provide a feasible approach to achieving ambient molecular oxygen activation. However, conventional surface defects (e.g., oxygen vacancies, OVs), featured with the coordinatively unsaturated metal sites, often favor the reduction of O2 to •O2- rather than O22- via two-electron transfer, hindering the efficient pollutant removal with high electron utilization. Herein, we demonstrate that this bottleneck can be well discharged by modulating the electronic structure of OVs via phosphorization. As a proof of concept, TiO2 nanoparticles are adopted as a model material for NaH2PO2 (HP) modification, in which HP induces the formation of OVs via weakening the Ti-O bonds through the hydrogen bond interactions. Additionally, the formed Ti-O-P covalent bond refines the electronic structure of OVs, which enables rapid electron transfer for two-electron molecular oxygen activation. As exemplified by NO oxidation, HP-modified TiO2 with abundant OVs achieved complete NO removal with high selectivity for benign nitrate, superior to that of pristine TiO2. This study highlights a promising approach to regulate the O2 activation via an electronic structure modulation and provides fresh insights into the rational design of a photocatalyst for environmental remediation.

Optical Properties of Individual Tar Balls in the Free Troposphere

Tar balls are brown carbonaceous particles that are highly viscous, spherical, amorphous, and light absorbing. They are believed to form in biomass burning smoke plumes during transport in the troposphere. Tar balls are also believed to have a significant impact on the Earth's radiative balance, but due to poorly characterized optical properties, this impact is highly uncertain. Here, we used two nighttime samples to investigate the chemical composition and optical properties of individual tar balls transported in the free troposphere to the Climate Observatory "Ottavio Vittori" on Mt. Cimone, Italy, using multimodal microspectroscopy. In our two samples, tar balls contributed 50% of carbonaceous particles by number. Of those tar balls, 16% were inhomogeneously mixed with other constituents. Using electron energy loss spectroscopy, we retrieved the complex refractive index (RI) for a wavelength range from 200 to 1200 nm for both inhomogeneously and homogeneously mixed tar balls. We found no significant difference in the average RI of inhomogeneously and homogeneously mixed tar balls (1.40-0.03i and 1.36-0.03i at 550 nm, respectively). Furthermore, we estimated the top of the atmosphere radiative forcing using the Santa Barbara DISORT Atmospheric Radiative Transfer model and found that a layer of only tar balls with an optical depth of 0.1 above vegetation would exert a positive radiative forcing ranging from 2.8 W m-2 (on a clear sky day) to 9.5 W m-2 (when clouds are below the aerosol layer). Understanding the optical properties of tar balls can help reduce uncertainties associated with the contribution of biomass-burning aerosol in current climate models.

Formation of nitrogen-containing gas phase products from the heterogeneous (photo)reaction of NO2 with gallic acid

Heterogeneous reaction of gas phase NO2 with atmospheric humic-like substances (HULIS) is potentially an important source of volatile organic compounds (VOCs) including nitrogen (N)-containing compounds, a class of brown carbon of emerging importance. However, the role of ubiquitous water-soluble aerosol components in this multiphase chemistry, namely nitrate and iron ions, remains largely unexplored. Here, we used secondary electrospray ionization ultrahigh-resolution mass spectrometry for real-time measurements of VOCs formed during the heterogeneous reaction of gas phase NO2 with a solution containing gallic acid (GA) as a proxy of HULIS at pH 5 relevant for moderately acidic aerosol particles. Results showed that the number of detected N-containing organic compounds largely increased from 4 during the NO2 reaction with GA in the absence of nitrate and iron ions to 55 in the presence of nitrate and iron ions. The N-containing compounds have reduced nitrogen functional groups, namely amines, imines and imides. These results suggest that the number of N-containing compounds is significantly higher in deliquescent aerosol particles due to the influence of relatively higher ionic strength from nitrate ions and complexation/redox reactivity of iron cations compared to that in the dilute aqueous phase representative of cloud, fog, and rain water.

Expediting Toluene Combustion by Harmonizing the Ce-O Strength over Co-Doped CeZr Oxide Catalysts

Low-temperature catalytic degradation of volatile organic compounds (VOCs) by enhancing the activity of non-precious metal catalysts has always been the focus of attention. The mineralization of aromatic VOCs requires the participation of a large number of oxygen atoms, so the activation of oxygen species is crucial in the degradation reaction. Herein, we originally adjust the Ce-O bond strength in CeZr oxide catalysts by cobalt doping to promote the activation of oxygen species, thus improving the toluene degradation performance while maintaining high stability. Subsequent characterizations and theoretical calculations demonstrate that the weakening of the Ce-O bond strength increases the oxygen vacancy content, promotes the activation of oxygen species, and enhances the redox ability of the catalysts. This strategy also promotes the activation of toluene and accelerates the depletion of intermediate species. This study will contribute a strategy to enhance the activation ability of oxygen species in non-noble metal oxide catalysts, thereby enhancing the degradation performance of VOCs.

Secondary organic aerosol formation from atmospheric reactions of anisole and associated health effects

Anisole (methoxybenzene) represents an important marker compound of lignin pyrolysis and a starting material for many chemical products. In this study, secondary organic aerosols (SOA) formed by anisole via various atmospheric processes, including homogeneous photooxidation with varying levels of OH• and NO_x and subsequent heterogeneous NO₃• dark reactions, were investigated. The yields of anisole SOA, particle-bound organoperoxides, particle-induced oxidative potential (OP), and cytotoxicity were characterized in view of the atmospheric fate of the anisole precursor. Anisole SOA yields ranged between 0.12 and 0.35, depending on the reaction pathways and aging degrees. Chemical analysis of the SOA suggests that cleavage of the benzene ring is the main reaction channel in the photooxidation of anisole to produce low-volatility, highly oxygenated small molecules. Fresh anisole SOA from OH• photooxidation are more light-absorbing and have higher OP and organoperoxide content. The high correlation between SOA OP and organoperoxide content decreases exponentially with the degree of OH• aging. However, the contribution of organoperoxides to OP is minor (<4%), suggesting that other, non-peroxide oxidizers play a central role in anisole SOA OP. The particle-induced OP and particulate organoperoxides yield both reach a maximum value after ∼2 days' of photooxidation, implicating the potential long impact of anisole during atmospheric transport. NO_x-involved photooxidation and nighttime NO₃• reactions facilitate organic nitrate formation and enhance particle light absorption. High NO_x levels suppress anisole SOA formation and organoperoxides yield in photooxidation, with decreased aerosol OP and cellular oxidative stress. In contrast, nighttime aging significantly increases the SOA toxicity and reactive oxygen species (ROS) generation in lung cells. These dynamic properties and the toxicity of anisole SOA advocate consideration of the complicated and consecutive aging processes in depicting the fate of VOCs and assessing the related effects in the atmosphere.

Two-year-long high-time-resolution apportionment of primary and secondary carbonaceous aerosols in the Los Angeles Basin using an advanced total carbon-black carbon (TC-BC(λ)) method

In recent years, carbonaceous aerosols (CA) have been recognized as a significant contributor to the concentration of particles smaller than 2.5 μm (i.e., PM_2.5), with a negative impact on public health and Earth's radiative balance. In this study, we present a method for CA apportionment based on high-time-resolution measurements of total carbon (TC), black carbon (BC), and spectral dependence of absorption coefficient using a recently developed Carbonaceous Aerosol Speciation System (CASS). Two-year-long CA measurements at two different locations within California's Los Angeles Basin are presented. CA was apportioned based on its optical absorption properties, organic or elemental carbon composition, and primary or secondary origin. We found that the secondary organic aerosols (SOA), on average, represent >50 % of CA in the study area, presumably resulting from the oxidation of anthropogenic and biogenic volatile organic components. Remarkable peaks of SOA in summer afternoons were observed, with a fractional contribution of up to 90 %. On the other hand, the peak of primary emitted CA, consisting of BC and primary organic aerosol (POA), contributed >80 % to the CA during morning rush hours on winter working days. The light absorption of BC dominated over the brown carbon (BrC), which contributed to 20 % and 10 % of optical absorption at the lower wavelength of 370 nm during winter nights and summer afternoons, respectively. The highest contribution of BrC, up to 50 %, was observed during the wildfire periods. Although the uncertainty levels can be high for some CA components (such as split between primary emitted and secondary formed BrC during winter nights), further research focused on the optical properties of CA at different locations may help to better constrain the parameters used in CA apportionment studies. We believe that the CASS system combined with the apportionment method presented in this study can offer simplified and cost-effective insights into the composition of carbonaceous aerosols.

Phase State and Relative Humidity Regulate the Heterogeneous Oxidation Kinetics and Pathways of Organic-Inorganic Mixed Aerosols

Inorganic species always coexist with organic materials in atmospheric particles and may influence the heterogeneous oxidation of organic aerosols. However, very limited studies have explored the role of the inorganics in the chemical evolution of organic species in mixed aerosols. This study examines the heterogeneous oxidation of glutaric acid-ammonium sulfate and 1,2,6-hexanetriol-ammonium sulfate aerosols by hydroxyl radicals (OH) under varied organic mass fractions (f_org) and relative humidity in a flow tube reactor. Coupling the oxidation kinetics and product measurements with kinetic model simulations, we found that under both low relative humidity (RH, 30-35%) and high RH conditions (85%), the decreased f_org from 0.7 to 0.2 accelerates the oxidation of the organic materials by a factor of up to 11. We suggest that the faster oxidation kinetics under low-RH conditions is due to full or partial phase separation, with the organics greatly enriched at the particle outer region, while enhanced "salting-out" of the organics and OH adsorption caused by higher inorganics could explain the observations under high-RH conditions. Analysis of the oxidation products reveals that the dilution of organics by the inorganic salts and corresponding water uptake under high-RH conditions will favor alkoxy radical fragmentation by a factor of 3-4 and inhibit its secondary chain propagation chemistry. Our results suggest that atmospheric organic aerosol oxidation lifetime and composition are strongly impacted by the coexistent inorganic salts.

Low-Temperature Combustion of Toluene over Cu-Doped SmMn2O5 Mullite Catalysts via Creating Highly Active Cu2+-O-Mn4+ Sites

Catalytic combustion of volatile organic compounds (VOCs) at low temperatures is still an urgent issue to be solved. Herein, low-temperature combustion of toluene over Cu-doped SmMn₂O₅ mullite catalysts via creating highly active Cu²⁺-O-Mn⁴⁺ sites has been originally demonstrated. Cu-doped SmMn₂O₅ mullite catalysts exhibited 90% conversion of toluene at 206 °C and displayed robust stability even in the presence of water. It has been demonstrated that Cu doping created Cu²⁺-O-Mn⁴⁺ active composite sites that were more exposed after removing surface Sm species via acid-etching. Benefiting from this, the redox and oxygen activation ability of catalysts was significantly enhanced. The consumption of benzaldehyde and benzoic acid as intermediate species and the CO₂ generation ability were apparently promoted, which were the direct reasons for the enhanced low-temperature combustion of toluene. This work provides novel ideas for the development of high-performance catalysts for low-temperature VOC combustion, which has great industrial application prospects.

Modulating the Electronic Metal-Support Interactions in Single-Atom Pt1 -CuO Catalyst for Boosting Acetone Oxidation

The development of highly active single-atom catalysts (SACs) and identifying their intrinsic active sites in oxidizing industrial hazardous hydrocarbons are challenging prospects. Tuning the electronic metal-support interactions (EMSIs) is valid for modulating the catalytic performance of SACs. We propose that the modulation of the EMSIs in a Pt₁ -CuO SAC significantly promotes the activity of the catalyst in acetone oxidation. The EMSIs promote charge redistribution through the unified Pt-O-Cu moieties, which modulates the d-band structure of atomic Pt sites, and strengthens the adsorption and activation of reactants. The positively charged Pt atoms are superior for activating acetone at low temperatures, and the stretched Cu-O bonds facilitate the activation of lattice oxygen atoms to participate in subsequent oxidation. We believe that this work will guide researchers to engineer efficient SACs for application in hydrocarbon oxidation reactions.

Optical Properties of Secondary Organic Aerosol Produced by Photooxidation of Naphthalene under NOx Condition

Secondary organic aerosols (SOAs) affect incoming solar radiation by interacting with light at ultraviolet and visible wavelength ranges. However, the relationship between the chemical composition and optical properties of SOA is still not well understood. In this study, the complex refractive index (RI) of SOA produced from OH oxidation of naphthalene in the presence of nitrogen oxides (NOx) was retrieved online in the wavelength range of 315-650 nm and the bulk chemical composition of the SOA was characterized by an online high-resolution time-of-flight mass spectrometer. In addition, the molecular-level composition of brown carbon chromophores was determined using high-performance liquid chromatography coupled to a photodiode array detector and a high-resolution mass spectrometer. The real part of the RI of the SOA increases with both the NOx/naphthalene ratio and aging time, likely due to the increased mean polarizability and decreased molecular weight due to fragmentation. Highly absorbing nitroaromatics (e.g., C₆H₅NO₄, C₇H₇NO₄, C₇H₅NO₅, C₈H₅NO₅) produced under higher NOx conditions contribute significantly to the light absorption of the SOA. The imaginary part of the RI linearly increases with the NOx/VOCs ratio due to the formation of nitroaromatic compounds. As a function of aging, the imaginary RI increases with the O/C ratio (slope = 0.024), mainly attributed to the achieved higher NOx/VOCs ratio, which favors the formation of light-absorbing nitroaromatics. The light-absorbing enhancement is not as significant with extensive aging as it is under a lower aging time due to the opening of aromatic rings by reactions.

Nitrogen-Containing Compounds Enhance Light Absorption of Aromatic-Derived Brown Carbon

The formation of secondary brown carbon (BrC) is chemically complex, leading to an unclear relationship between its molecular composition and optical properties. Here, we present an in-depth investigation of molecular-specific optical properties and aging of secondary BrC produced from the photooxidation of ethylbenzene at varied NO_x levels for the first time. Due to the pronounced formation of unsaturated products, the mass absorption coefficient (MAC) of ethylbenzene secondary organic aerosols (ESOA) at 365 nm was higher than that of biogenic SOA by a factor of 10. A high NO_x level ([ethylbenzene]₀/[NO_x]₀ < 10 ppbC ppb^-1) was found to significantly increase the average MAC_300-700nm of ESOA by 0.29 m² g^-1. The data from two complementary high-resolution mass spectrometers and quantum chemical calculations suggested that nitrogen-containing compounds were largely responsible for the enhanced light absorption of high-NO_x ESOA, and multifunctional nitroaromatic compounds (such as C₈H₉NO₃ and C₈H₉NO₄) were identified as important BrC chromophores. High-NO_x ESOA underwent photobleaching upon direct exposure to ultraviolet light. Photolysis did not lead to the significant decomposition of C₈H₉NO₃ and C₈H₉NO₄, indicating that nitroaromatic compounds may serve as relatively stable nitrogen reservoirs and would effectively absorb solar radiation during the daytime.

Molecular Analysis of Secondary Brown Carbon Produced from the Photooxidation of Naphthalene

We investigate the chemical composition of organic light-absorbing components, also known as brown carbon (BrC) chromophores, formed in a proxy of anthropogenic secondary organic aerosol generated from the photooxidation of naphthalene (naph-SOA) in the absence and presence of NO_x. High-performance liquid chromatography equipped with a photodiode array detector and electrospray ionization high-resolution mass spectrometer is employed to characterize naph-SOA and its BrC components. We provide molecular-level insights into the chemical composition and optical properties of individual naph-SOA components and investigate their BrC relevance. This work reveals the formation of strongly absorbing nitro-aromatic chromophores under high-NO_x conditions and describes their degradation during atmospheric aging. NO_x addition enhanced the light absorption of naph-SOA while reducing wavelength-dependence, as seen by the mass absorption coefficient (MAC) and absorption Ångström exponent (AAE). Optical parameters of naph-SOA generated under low- and high-NO_x conditions showed a range of values from MAC_OM 405nm ∼ 0.12 m² g^-1 and AAE_300-450nm ∼ 8.87 (low-NO_x) to MAC_OM 405nm ∼ 0.19 m² g^-1 and AAE_300-450nm ∼ 7.59 (high-NO_x), consistent with "very weak" and "weak" BrC optical classes, respectively. The weak-BrC class is commonly attributed to biomass smoldering emissions, which appear to have optical properties comparable with the naph-SOA. Molecular chromophores contributing to naphthalene BrC absorption were identified with substantial nitro-aromatics, indicating that these species may be used as source-specific markers of BrC related to the anthropogenic emissions.

Secondary organic aerosols produced from photochemical oxidation of secondarily evaporated biomass burning organic gases: Chemical composition, toxicity, optical properties, and climate effect

Biomass burning (BB) is an important source of primary organic aerosols (POA). These POA contain a significant fraction of semivolatile organic compounds, and can release them into the gas phase during the dilution process in transport. Such evaporated compounds were termed "secondarily evaporated BB organic gases (SBB-OGs)" to distinguish them from the more studied primary emissions. SBB-OGs contribute to the formation of secondary organic aerosols (SOA) through reactions with atmospheric oxidants, and thus may influence human health and the Earth's radiation budget. In this study, tar materials collected from wood pyrolysis were taken as proxies for POA from smoldering-phase BB and were used to release SBB-OGs constantly in the lab. OH-initiated oxidation of the SBB-OGs in the absence of NO_x was investigated using an oxidation flow reactor, and the chemical, optical, and toxicological properties of SOA were comprehensively characterized. Carbonyl compounds were the most abundant species in identified SOA species. Human lung epithelial cells exposed to an environmentally relevant dose of the most aged SOA did not exhibit detectable cell mortality. The oxidative potential of SOA was characterized with the dithiothreitol (DTT) assay, and its DTT consumption rate was 15.5 ± 0.5 pmol min^-1 μg^-1. The SOA present comparable light scattering to BB-POA, but have lower light absorption with imaginary refractive index less than 0.01 within the wavelength range of 360-600 nm. Calculations based on Mie theory show that pure airborne SOA with atmospherically relevant sizes of 50-400 nm have a cooling effect; when acting as the coating materials, these SOA can counteract the warming effect brought by airborne black carbon aerosol.

Gas-Particle Partitioning and SOA Yields of Organonitrate Products from NO3-Initiated Oxidation of Isoprene under Varied Chemical Regimes

Alkyl nitrate (AN) and secondary organic aerosol (SOA) from the reaction of nitrate radicals (NO₃) with isoprene were observed in the Simulation of Atmospheric PHotochemistry In a large Reaction (SAPHIR) chamber during the NO₃Isop campaign in August 2018. Based on 15 day-long experiments under various reaction conditions, we conclude that the reaction has a nominally unity molar AN yield (observed range 90 ± 40%) and an SOA mass yield of OA + organic nitrate aerosol of 13-15% (with ∼50 μg m^-3 inorganic seed aerosol and 2-5 μg m^-3 total organic aerosol). Isoprene (5-25 ppb) and oxidant (typically ∼100 ppb O₃ and 5-25 ppb NO₂) concentrations and aerosol composition (inorganic and organic coating) were varied while remaining close to ambient conditions, producing similar AN and SOA yields under all regimes. We observe the formation of dinitrates upon oxidation of the second double bond only once the isoprene precursor is fully consumed. We determine the bulk partitioning coefficient for ANs (K _p ∼ 10^-3 m³ μg^-1), indicating an average volatility corresponding to a C₅ hydroxy hydroperoxy nitrate.