Counting Nanoplastics in Environmental Waters by Single Particle Inductively Coupled Plasma Mass Spectroscopy after Cloud-Point Extraction and In Situ Labeling of Gold Nanoparticles

Primary Microplastics in the Ecosystem: Ecological Effects, Risks, and Comprehensive Perspectives on Toxicology and Detection Methods

Recent discoveries of microplastics in cities, suburbs, and even remote locations, far from microplastic source regions, have raised the possibility of long-distance transmission of microplastics in many ecosystems. A little is known scientifically about the threat that it posed to the environment by microplastics. The problem's apparent size necessitates the rapid development of reliable scientific advice regarding the ecological risks of microplastics. These concerns are brought on by the lack of consistent sample and identification techniques, as well as the limited physical analysis and understanding of microplastic pollution. This review provides insight regarding some unaddressed issues about the occurrence, fate, movement, and impact of microplastics, in general, with special emphasis on primary microplastics. The approaches taken in the earlier investigations have been analyzed and different recommendations for future research have been suggested.

Environmental nanoplastics quantification by pyrolysis-gas chromatography-mass spectrometry in the Pearl River, China: First insights into spatiotemporal distributions, compositions, sources and risks

Nanoplastics (NPs, size <1000 nm) are ubiquitous plastic particles, potentially more abundant than microplastics in the environment; however, studies highlighting their distribution dynamics in freshwater are rare due to analytical limitations. Here, we investigated spatiotemporal levels of nine polymers of NPs in surface water samples (n = 30) from the full stretch of the Pearl River (sites, n = 15) using pyrolysis gas chromatography-mass spectrometry (Py-GC/MS). Six polymers were detected, including polystyrene (PS), polyvinyl chloride (PVC), nylon/polyamide 66 (PA66), polyester (PES), poly(methyl methacrylate) (PMMA) and polyethylene (PE), where three polymers showed high detection frequencies; PS (100 % in winter and summer), followed by PVC (73 % in winter and 87 % in summer) and PA66 (53 % in winter and 67 % in summer). The spatiotemporal distribution revealed the sites related to aquaculture (AQ) and shipping (SHP) showed higher NP levels than those of human settlement (HS) and wastewater treatment plants (WWTPs) (p = 0.004), and relatively high average levels of NPs in the urban sites compared to rural sites (p = 0.04), albeit showed no obvious seasonal differences (p = 0.78). For instance, the average PS levels in the Pearl River were in the following order: AQ 411.55 µg/L > SHP 81.75 µg/L > WWTP 56.66 µg/L > HS 47.75 µg/L in summer and HS 188.1 µg/L > SHP 103.55 µg/L > AQ 74.7 µg/L > WWTP 62.1 µg/L in winter. Source apportionment showed a higher contribution through domestic plastic waste emissions among urban sites, while rural sites showed an elevated contribution via aquaculture, agriculture, and surface run-off to the NP pollution. Risk assessment revealed that NPs at SHP and AQ sites posed a higher integrated risk in terms of pollution load index (PLI) than those at WWTP and HS sites. Regarding polymer hazard index (HI), 80 % of sampling sites in summer and 60 % of sampling sites in winter posed level III polymer risk, with PVC posing the highest risk. This study provides novel insights into the seasonal contamination and polymer risks of NP in the Pearl River, which will help to regulate the production and consumption of plastics in the region. ENVIRONMENTAL IMPLICATIONS: The contamination dynamics of field nanoplastics (NPs) in freshwater resources remain little understood, mainly attributed to analytical constraints. This study aims to highlight the spatiotemporal distribution of NPs in the Pearl River among various land use types, urban-rural comparison, seasonal comparison, their compositional profiles, potential sources, interaction with environmental factors, and ecological and polymer hazard assessments of investigated polymers in the full stretch of the Pearl River from Liuxi Reservoir to the Pearl River Delta (PRD) region. This study, with a comparatively large number of samples and NP polymers, will offer novel insights into the contamination profiles of nano-sized plastic particles in one of the important freshwater riverine systems in China.

Concentration analysis of metal-labeled nanoplastics in different water samples using electrochemistry

Despite the threats posed by nanoplastics to the environment and human health, little was known about the occurrence, formation, migration, and environmental impacts of nanoplastics due to the lack of quantitative and sensitive detection techniques. In this work, an electrochemical strategy for the detection of nanoplastics based on Ag labeling was proposed. Positively charged silver ions were attached to negatively charged polystyrene nanoplastics (PSNPs), and then the silver ions on the surface of PSNPs were reduced to Ag by sodium borohydride. Subsequently, the concentration of PSNPs was determined by identifying the signal of Ag by differential pulse voltammetry. The method showed different sensitivity for PSNPs of different sizes (100, 367, 500 nm). For tap water samples, the reason for the change in Ag electrochemical signal was discussed. The sensitivity of the method to PSNPs in tap water was investigated. The feasibility of the method for environmental water samples was verified using spiked lake water and spiked seawater, and satisfactory recoveries (93-112 %) were obtained for PSNPs of different sizes and concentrations. This study provided a sensitive, low-cost, and simple method without complex instrumentation, which was important for the determination of PSNPs in environmental water samples.

Uptake and transport of micro/nanoplastics in terrestrial plants: Detection, mechanisms, and influencing factors

The pervasive dispersion of micro/nanoplastics in various environmental matrices has raised concerns regarding their potential intrusion into terrestrial ecosystems and, notably, plants. In this comprehensive review, we focus on the interaction between these minute plastic particles and plants. We delve into the current methodologies available for detecting micro/nanoplastics in plant tissues, assess the accumulation and distribution of these particles within roots, stems, and leaves, and elucidate the specific uptake and transport mechanisms, including endocytosis, apoplastic transport, crack-entry mode, and stomatal entry. Moreover, uptake and transport of micro/nanoplastics are complex processes influenced by multiple factors, including particle size, surface charge, mechanical properties, and physiological characteristics of plants, as well as external environmental conditions. In conclusion, this review paper provided valuable insights into the current understanding of these mechanisms, highlighting the complexity of the processes and the multitude of factors that can influence them. Further research in this area is warranted to fully comprehend the fate of micro/nanoplastics in plants and their implications for environmental sustainability.

Liquid Interfacial Coassembly of Plasmonic Arrays and Trace Hydrophobic Nanoplastics in Edible Oils for Robust Identification and Classification by Surface-Enhanced Raman Spectroscopy

The ubiquity of micro-/nanoplastics poses a visible threat to the environment, aquatic organisms, and human beings and has become a global concern. Here, we proposed a liquid interface-based strategy using surface-enhanced Raman spectroscopy to coassemble nanoplastics and gold nanoparticles into a dense and homogeneous plasmonic array, thereby enabling the rapid and sensitive detection of trace nanoplastics. In addition, due to the uniqueness of the oil-water immiscible two-phase interface, we achieved ideal results for the detection of nanoplastics in a complex matrix (e.g., aqueous environment and edible oil) with a detection limit of μg/mL. With the aid of the principal component analysis algorithm, the differentiation and identification of multiple nanoplastic components (e.g., polystyrene, polyethylene, and polyethylene terephthalate) in aqueous environments and common hazards (e.g., Bap and Phe) in edible oil were achieved. Therefore, our self-assembled plasmonic arrays are expected to be used for monitoring environmental pollution and food safety.

Nanoparticulate pollutants in the environment: Analytical methods, formation, and transformation

The wide application of nanomaterials and plastic products generates a substantial number of nanoparticulate pollutants in the environment. Nanoparticulate pollutants are quite different from their bulk counterparts because of their unique physicochemical properties, which may pose a threat to environmental organisms and human beings. To accurately predict the environmental risks of nanoparticulate pollutants, great efforts have been devoted to developing reliable methods to define their occurrence and track their fate and transformation in the environment. Herein, we summarized representative studies on the preconcentration, separation, formation, and transformation of nanoparticulate pollutants in environmental samples. Finally, some perspectives on future research directions are proposed.

Atmospheric microplastic and nanoplastic: The toxicological paradigm on the cellular system

The increasing demand for plastic in our daily lives has led to global plastic pollution. The improper disposal of plastic has resulted in a massive amount of atmospheric microplastics (MPs), which has further resulted in the production of atmospheric nanoplastics (NPs). Because of its intimate relationship with the environment and human health, microplastic and nanoplastic contamination is becoming a problem. Because microplastics and nanoplastics are microscopic and light, they may penetrate deep into the human lungs. Despite several studies demonstrating the abundance of microplastics and nanoplastics in the air, the potential risks of atmospheric microplastics and nanoplastics remain unknown. Because of its small size, atmospheric nanoplastic characterization has presented significant challenges. This paper describes sampling and characterization procedures for atmospheric microplastics and nanoplastics. This study also examines the numerous harmful effects of plastic particles on human health and other species. There is a significant void in research on the toxicity of airborne microplastics and nanoplastics upon inhalation, which has significant toxicological potential in the future. Further study is needed to determine the influence of microplastic and nanoplastic on pulmonary diseases.

Innovative approaches in cloud-point extraction

Cloud-point extraction (CPE) is a pre-treatment technique for the extraction and preconcentration of different chemical compounds, such as metal ions, pesticides, drugs, phenols, vitamins etc., from various samples. CPE is based on the phenomenon of two phases (micellar and aqueous) forming after the heating of an aqueous isotropic solution of a non-ionic or zwitterionic surfactant above the cloud-point temperature. If analytes are added to the surfactant solution under suitable conditions, they should be extracted into the micellar phase, also called the surfactant-rich phase. Recently, the traditional CPE procedure is being increasingly replaced by improved CPE procedures. In this study, recent advances in CPE over the last three years (2020 - 2022), including the application of various innovative approaches, are reviewed. In addition to the basic principle of CPE, alternative extraction media in CPE, CPE supported by various auxiliary energies, a different modified CPE procedure and the use nanomaterials and solid-phase extraction in combination with CPE are presented and discussed. Finally, some future trends for improved CPE are presented.

Direct Measurement of Microplastics by Carbon Detection via Single Particle ICP-TOFMS in Complex Aqueous Suspensions

Multiple analytical techniques to measure microplastics (MPs) in complex environmental matrices are currently under development, and which is most suited often depends on the aim(s) of the research question and the experimental design. Here, we further broaden the suite of possible techniques which can directly detect MPs in suspension while differentiating the carbon contained in MPs from other natural particles and dissolved organic carbon (DOC). Single particle inductively coupled plasma mass spectrometry (sp-ICP-MS) is well suited to measuring particles at trace concentrations, and the use of ICP time-of-flight-MS (ICP-TOFMS) allows one to simultaneously monitor the entire elemental spectrum to assess the full elemental composition of individual particles through developing elemental fingerprints. Because carbon is not detected in a standard operation mode with icp TOF, a dedicated optimization was necessary. Subsequently, to assess the feasibility of monitoring ¹²C particle pulses for the detection of MPs in more complex natural waters, two proof-of-principle studies were performed to measure MPs in waters with environmentally relevant DOC backgrounds (≤20 mg/L) and in the presence of other carbon containing particles, here, algae. Elevated DOC concentrations did not impact the enumeration of particles in suspension, and individual MPs, single algae, and aggregates of MPs and algae were clearly distinguished. The simultaneous identification of different analytes of interest allows for multiplexed sp-ICP-TOFMS experiments utilizing elemental fingerprinting of particles and is a step forward in quantifying MPs in aqueous environmental samples.

Nanoplastics induces oxidative stress and triggers lysosome-associated immune-defensive cell death in the earthworm Eisenia fetida

Nanoplastics (NPs) are increasingly perceived as an emerging threat to terrestrial environments, but the adverse impacts of NPs on soil fauna and the mechanisms behind these negative outcomes remain elusive. Here, a risk assessment of NPs was conducted on model organism (earthworm) from tissue to cell. Using palladium-doped polystyrene NPs, we quantitatively measured nanoplastic accumulation in earthworm and investigated its toxic effects by combining physiological assessment with RNA-Seq transcriptomic analyses. After a 42-day exposure, earthworm accumulated up to 15.9 and 143.3 mg kg-1 of NPs for the low (0.3 mg kg-1) and high (3 mg kg-1) dose groups, respectively. NPs retention led to the decrease of antioxidant enzyme activity and the accumulation of reactive oxygen species (O2- and H2O2), which reduced growth rate by 21.3 %-50.8 % and caused pathological abnormalities. These adverse effects were enhanced by the positively charged NPs. Furthermore, we observed that irrespective of surface charge, after 2 h of exposure, NPs were gradually internalized by earthworm coelomocytes (∼0.12 μg per cell) and mainly amassed at lysosomes. Those agglomerations stimulated lysosomal membranes to lose stability and even rupture, resulting in impeded autophagy process and cellular clearance, and eventually coelomocyte death. In comparison with negatively charged nanoplastics, the positively charged NPs exerted 83 % higher cytotoxicity. Our findings provide a better understanding of how NPs posed harmful effects on soil fauna and have important implications for evaluating the ecological risk of NPs.

Investigating the Cellular Uptake of Model Nanoplastics by Single-Cell ICP-MS

A synthetic route to producing gold-doped environmentally relevant nanoplastics and a method for the rapid and high-throughput qualitative investigation of their cellular interactions have been developed. Polyethylene (PE) and polyvinyl chloride (PVC) nanoparticles, doped with ultrasmall gold nanoparticles, were synthesized via an oil-in-water emulsion technique as models for floating and sedimenting nanoplastics, respectively. Gold nanoparticles were chosen as a dopant as they are considered to be chemically stable, relatively easy to obtain, interference-free for elemental analysis, and suitable for bio-applications. The suitability of the doped particles for quick detection via inductively coupled plasma mass spectrometry (ICP-MS), operating in single-cell mode (scICP-MS), was demonstrated. Specifically, the method was applied to the analysis of nanoplastics in sizes ranging from 50 to 350 nm, taking advantage of the low limit of detection of single-cell ICP-MS for gold nanoparticles. As an initial proof of concept, gold-doped PVC and PE nanoplastics were employed to quantify the interaction and uptake of nanoplastics by the RAW 264.7 mouse macrophage cell line, using scICP-MS and electron microscopy. Macrophages were chosen because their natural biological functions would make them likely to internalize nanoplastics and, thus, would produce samples to verify the test methodology. Finally, the method was applied to assess the uptake by CaCo-2 human intestinal cells, this being a more relevant model for humanexposure to those nanoplastics that are potentially available in the food chain. For both case studies, two concentrations of nanoplastics were employed to simulate both standard environmental conditions and exceptional circumstances, such as pollution hotspot areas.

Analytical methods for microplastics in the environment: a review

Microplastic pollution is a recently discovered threat to ecosystems requiring the development of new analytical methods. Here, we review classical and advanced methods for microplastic analysis. Methods include visual analysis, laser diffraction particle, dynamic light scattering, scanning electron microscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, thermal analysis, mass spectrometry, aptamer and in vitro selection, and flow cytometry.

Finding the tiny plastic needle in the haystack: how field flow fractionation can help to analyze nanoplastics in food

While the exact health risks associated with nanoplastics are currently the focus of intense research, there is no doubt that humans are exposed to nanoplastics and that food could be a major source of exposure. Nanoplastics are released from plastic materials and articles used during food production, processing, storage, preparation, and serving. They are also likely to enter the food chain via contaminated water, air, and soil. However, very limited exposure data for risk assessment exists so far due to the lack of suitable analytical methods. Nanoplastic detection in food poses a great analytical challenge due to the complexity of plastics and food matrices as well as the small size and expectedly low concentration of the plastic particles. Multidetector field flow fractionation has emerged as a valuable analytical technique for nanoparticle separation over the last decades, and the first studies using the technique for analyzing nanoplastics in complex matrices are emerging. In combination with online detectors and offline analysis, multidetector field flow fractionation is a powerful platform for advanced characterization of nanoplastics in food by reducing sample complexity, which otherwise hampers the full potential of most analytical techniques. The focus of this article is to present the current state of the art of multidetector field flow fractionation for nanoplastic analysis and to discuss future trends and needs aiming at the analysis of nanoplastics in food.

Swelling-Induced Fragmentation and Polymer Leakage of Nanoplastics in Seawater

Nanoplastics (NPs) have been successively detected in different environmental matrixes and have aroused great concern worldwide. However, the fate of NPs in real environments such as seawater remains unclear, impeding their environmental risk assessment. Herein, multiple techniques were employed to monitor the particle number concentration, size, and morphology evolution of polystyrene NPs in seawater under simulated sunlight over a time course of 29 days. Aggregation was found to be a continuous process that occurred constantly and was markedly promoted by light irradiation. Moreover, the occurrence of NP swelling, fragmentation, and polymer leaching was evidenced by both transmission electron microscopy and scanning electron microscopy techniques. The statistical results of different transformation types suggested that swelling induces fragmentation and polymer leakage and that light irradiation plays a positive but not decisive role in this transformation. The observation of fragmentation and polymer leakage of poly(methyl methacrylate) and poly(vinyl chloride) NPs suggests that these transformation processes are general for NPs of different polymer types. Facilitated by the increase of surface functional groups, the ions in seawater could penetrate into NPs and then stretch the polymer structure, leading to the swelling phenomenon and other transformations.

Extraction and quantification of polystyrene nanoplastics from biological samples

Accurate quantification of nanoplastics (NPs) in complex matrices remains a challenge, especially for biological samples containing high content of organic matters. Herein, a new method extracting and quantifying polystyrene (PS) NPs from biological samples was developed. The extraction included alkaline digestion, centrifugation, and cloud point extraction (CPE), and the quantification included gold nanoparticles formation and labeling on surfaces of the extracted NPs and thereafter measurement with single particle inductively coupled plasma mass spectrometry (SP-ICP-MS). Results show that 25% tetramethylammonium hydroxide solution was an effective alkaline digestion solution for biological matrices, and CPE after centrifugation (3000 rpm, 10 min) was applicable to purify and enrich PS NPs with different sizes (100 and 500 nm) and surface functionalities (-COOH and -NH₂ modifications) from the digestion solution. The efficiency of Au labeling on PS NPs surface was improved by about 70% in the presence of 100 μM cetyltrimethylammonium bromide. The performance of the quantification method was examined by extraction and measurement of PS NPs spiked in four representative organism samples including bacteria, algae, nematode, and earthworm, and was further validated by analyzing the accumulated PS NPs in exposed nematodes. Good recovery rates (65 ± 10%-122 ± 22%) were achieved for spiking levels of 5-50 μg g^-1; the limit of detection was 3.7 × 10⁷ particles g^-1, corresponding to the mass concentration of about 0.02 and 2.5 μg g^-1 for the 100 nm and 500 nm PS NPs, respectively. The established extraction and quantification methods are efficient and sensitive, providing a useful approach for further exploring the environmental behavior and toxicity of NPs.

Influence of particle characteristics, heating temperature and time on the pyrolysis product distributions of polystyrene micro- and nano-plastics

Pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) has been widely used for the detection of micro- and nanoplastics (MNPs) in the environment. However, there is a lack of thorough investigation on the effects of pyrolysis temperature and time, as well as the particle source, size and mass of MNPs on the pyrolysis efficiency and pyrolysis product distribution of MNPs. Herein, taking the common plastics polystyrene (PS) as a model, we systematically evaluated the influences of the above factors on the pyrolysis of PS MNPs. Results showed that pyrolysis temperature and time significantly affect the pyrolysis efficiency. By measuring the relative response values of the indicator compound styrene trimers to styrene monomer, the optimum condition was determined as the temperature of 510 ℃ and pyrolysis time longer than 18 s. Meanwhile, the mass of MNPs also affected the distribution of PS pyrolysis products. The proportions of styrene dimers and trimers increased slightly with PS MNP mass, while the source, particle size of MNPs have little effect on the pyrolysis product distribution. This work proposed a suitable pyrolysis temperature and time for the determination of PS by Py-GC/MS, which would contribute to the accurate analysis of PS MNPs in the environment.

Revealing Trace Nanoplastics in Food Packages─An Electrochemical Approach Facilitated by Synergistic Attraction of Electrostatics and Hydrophobicity

Most food packages are made of plastics, nanoplastics released from which can be directly ingested and induce serious damage to organisms. Therefore, it is urgent to develop an effective and convenient method for nanoplastic determinations in food packages. In this work, we present a sandwich-based electrochemical strategy for nanoplastic determination. Positively charged Au nanoparticles were coated onto a Au electrode to selectively capture negatively charged nanoplastics in an aqueous environment. Subsequently, the nanoplastics were recognized by the signal molecule ferrocene via the hydrophobic interaction and determined by differential pulse voltammetry. Our sandwich-type detection depends on both electronegativity and hydrophobicity of nanoplastics, which make the method applicable for the assays of packages made of widely commercialized polystyrene (PS), polypropylene (PP), polyethylene (PE), and polyamide (PA). The method displays different sensitivities to above four nanoplastics but the same dynamic range from 1 to 100 μg·L^-1. Based on it, the nanoplastics released from several typical food packages were assayed. Teabags were revealed with significant nanoplastic release, while instant noodle boxes, paper cups, and take-out boxes release slightly. The good recoveries in nanoplastic-spiked samples confirm the accuracy and applicability of this method. This work provides a sensitive, low-cost, and simple method without complicated instruments and pretreatment, which is of great significance for the determination of nanoplastics released from food packages.

Single-Nanoparticle Differential Immunoassay for Multiplexed Gastric Cancer Biomarker Monitoring

Precision medicine demands the best application of multiple unambiguous biomarkers to bring uniform decisions in disease prognosis. The remarkable development of heterogeneous immunoassay greatly promotes precision medicine when combined with the biomarker combination strategy. Nevertheless, the cumbersome washing steps in heterogeneous immunoassay have inevitably compromised the accuracy because of the sample losses and nature change of the matrix, challenging the further exploration of a more facile and lower limit-of-detection analysis. The new methodologies with high throughputs and specificity are never out of date to provide simultaneous evaluations and uniform decisions on multiple analytes through a simple process. Herein, we propose a new wash-free immunoassay, named differential assay, for multiplexed biomarker monitoring. The method is based on counting the number difference of unbound nanoparticle tags before and after immunoreactions from a solid support (i.e., magnetic microsphere) by single-particle inductively coupled plasma mass spectrometry (sp-ICP-MS), discarding the tedious washing steps. We primarily explore the proof-of-concept proposal within two types (sandwich and competitive assay), demonstrating the good feasibility for further facile clinical practice. To provide efficient multiplexed evaluations, we synthesized PtNPs with four diameters and screened the most suitable size for efficient differential immunoassay. The wash-free strategy was successfully utilized in simultaneous serological biomarker (CA724, CA199, and CEA) evaluation, with results in good accordance with those measured by the clinical routine method. Potentially, the proposed differential bioassay can be regarded as a more facile and valuable tool in malignancy prognosis and cancer recurrence monitoring.

Identification of Trace Polystyrene Nanoplastics Down to 50 nm by the Hyphenated Method of Filtration and Surface-Enhanced Raman Spectroscopy Based on Silver Nanowire Membranes

Nanoplastics are emerging pollutants that pose potential threats to the environment and organisms. However, in-depth research on nanoplastics has been hindered by the absence of feasible and reliable analytical methods, particularly for trace nanoplastics. Herein, we propose a hyphenated method involving membrane filtration and surface-enhanced Raman spectroscopy (SERS) to analyze trace nanoplastics in water. In this method, a bifunctional Ag nanowire membrane was employed to enrich nanoplastics and enhance their Raman spectra in situ, which omitted sample transfer and avoided losing smaller nanoplastics. Good retention rates (86.7% for 50 nm and approximately 95.0% for 100-1000 nm) and high sensitivity (down to 10^-7 g/L for 50-1000 nm and up to 10⁵ SERS enhancement factor) of standard polystyrene (PS) nanoplastics were achieved using the proposed method. PS nanoplastics with concentrations from 10^-1 to 10^-7 g/L and sizes ranging from 50 to 1000 nm were successfully detected by Raman mapping. Moreover, PS micro- and nanoplastics in environmental water samples collected from the seafood market were also detected at the μg/L level. Consequently, the proposed method provides more possibilities for analyzing low-concentration nanoplastics in aquatic environments with high enrichment efficiency, minimal sample loss, and high sensitivity.

A scoping review protocol on in vivo human plastic exposure and health impacts

BACKGROUND

Global plastic production has increased exponentially since the 1960s, with more than 6300 million metric tons of plastic waste generated to date. Studies have found a range of human health outcomes associated with exposure to plastic chemicals. However, only a fraction of plastic chemicals used have been studied in vivo, and then often in animals, for acute toxicological effects. With many questions still unanswered about how long-term exposure to plastic impacts human health, there is an urgent need to map human in vivo research conducted to date, casting a broad net by searching terms for a comprehensive suite of plastic chemical exposures and the widest range of health domains.

METHODS

This protocol describes a scoping review that will follow the recommended framework outlined in the 2017 Guidance for the Conduct of Joanna Briggs Institute (JBI) Scoping Reviews, to be reported in accordance with Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR) Checklist. A literature search of primary clinical studies in English from 1960 onwards will be conducted in MEDLINE (Ovid) and EMBASE (Ovid) databases. References eligible for inclusion will be identified through a quality-controlled, multi-level screening process. Extracted data will be presented in diagrammatic and tabular form, with a narrative summary addressing the review questions.

DISCUSSION

This scoping review will comprehensively map the primary research undertaken to date on plastic exposure and human health. Secondary outputs will include extensive databases on plastic chemicals and human health outcomes/impacts.

SYSTEMATIC REVIEW REGISTRATION

Open Science Framework (OSF)-Standard Pre-Data Collection Registration, https://archive.org/details/osf-registrations-gbxps-v1 , https://doi.org/10.17605/OSF.IO/GBXPS.

Evaluating the Occurrence of Polystyrene Nanoparticles in Environmental Waters by Agglomeration with Alkylated Ferroferric Oxide Followed by Micropore Membrane Filtration Collection and Py-GC/MS Analysis

Although nanoplastics (NPs) are recognized as emerging anthropogenic particulate pollutants, the occurrence of NPs in the environment is rarely reported, partly due to the lack of sensitive methods for the concentration and detection of NPs. Herein, we present an efficient method for enriching NPs of different compositions and various sizes. Alkylated ferroferric oxide (Fe₃O₄) particles were prepared as adsorbents for highly efficient capture of NPs in environmental waters, and the formed large Fe₃O₄-NP agglomerates were separated by membrane filtration. Detection limits of 0.02-0.03 μg/L were obtained for polystyrene (PS) and poly(methyl methacrylate) (PMMA) NPs by detection with pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS). When analyzing real water samples from different sources, it is remarkable that PS NPs were detected in 11 out of 15 samples with concentrations ranging from <0.07 to 0.73 μg/L, while PMMA were not detected. The wide detection of PS NPs in our study confirms the previous speculation that NPs may be ubiquitous in the environmental waters. The accurate quantification of PS NPs in environmental waters make it possible to monitor the pollution status of NPs in aquatic systems and evaluate their potential risks.

In-situ quantitative monitoring the organic contaminants uptake onto suspended microplastics in aquatic environments

Microplastics act as a source of organic contaminants in aquatic environments and thus affect their environmental fate and toxicity. Because of the weak and reversible interactions between microplastics and organic species, the organic coronas vary with their surrounding environments. Thus, in order to evaluate the possible environmental risks of microplastics, methods for evaluating the dynamic uptake of organic contaminants onto suspended microplastics in aquatic environments are greatly desired. In this work, a UV-vis spectroscopy-based approach was developed for in-situ monitoring organic contaminants uptake onto suspended microplastics after correcting the light scattering interference from microplastics suspensions and establishing the nonlinear relationship between concentration and light absorbance of organic species. The inverse adding-doubling method based on radiative transfer theory was adopted to correct the light scattering effect of suspensions. Then, the resulting mixed absorption spectra were decomposed to calculate the concentrations of the aqueous and adsorbed organic species simultaneously with a nonlinear calibration method. The uptake processes of bisphenol A and p-nitrophenol onto nylon 66 microparticles were monitored with this approach and confirmed by high-performance liquid chromatography analysis. The approach was validated by applying it to natural water samples, and the equilibrium adsorption capacity was found to be interfered mainly by the protein-like substances. This approach has high accuracy, good reproducibility, remarkable universality, and ease of handling, and also provides a potential tool for characterizing the corona formation process on suspended particles both in natural and artificial environments, such as eco-corona formation and engineering surface modification on nano/micro-particles.

Bioanalytical approaches for the detection, characterization, and risk assessment of micro/nanoplastics in agriculture and food systems

This review discusses the most recent literature (mostly since 2019) on the presence and impact of microplastics (MPs, particle size of 1 μm to 5 mm) and nanoplastics (NPs, particle size of 1 to 1000 nm) throughout the agricultural and food supply chain, focusing on the methods and technologies for the detection and characterization of these materials at key entry points. Methods for the detection of M/NPs include electron and atomic force microscopy, vibrational spectroscopy (FTIR and Raman), hyperspectral (bright field and dark field) and fluorescence imaging, and pyrolysis-gas chromatography coupled to mass spectrometry. Microfluidic biosensors and risk assessment assays of MP/NP for in vitro, in vivo, and in silico models have also been used. Advantages and limitations of each method or approach in specific application scenarios are discussed to highlight the scientific and technological obstacles to be overcome in future research. Although progress in recent years has increased our understanding of the mechanisms and the extent to which MP/NP affects health and the environment, many challenges remain largely due to the lack of standardized and reliable detection and characterization methods. Most of the methods available today are low-throughput, which limits their practical application to food and agricultural samples. Development of rapid and high-throughput field-deployable methods for onsite screening of MP/NPs is therefore a high priority. Based on the current literature, we conclude that detecting the presence and understanding the impact of MP/NP throughout the agricultural and food supply chain require the development of novel deployable analytical methods and sensors, the combination of high-precision lab analysis with rapid onsite screening, and a data hub(s) that hosts and curates data for future analysis.

Living in a transient world: ICP-MS reinvented via time-resolved analysis for monitoring single events

After 40 years of development, inductively coupled plasma-mass spectrometry (ICP-MS) can hardly be considered as a novel technique anymore. ICP-MS has become the reference when it comes to multi-element bulk analysis at (ultra)trace levels, as well as to isotope ratio determination for metal(loid)s. However, over the last decade, this technique has managed to uncover an entirely new application field, providing information in a variety of contexts related to the individual analysis of single entities (e.g., nanoparticles, cells, or micro/nanoplastics), thus addressing new societal challenges. And this profound expansion of its application range becomes even more remarkable when considering that it has been made possible in an a priori simple way: by providing faster data acquisition and developing the corresponding theoretical substrate to relate the time-resolved signals thus obtained with the elemental composition of the target entities. This review presents the underlying concepts behind single event-ICP-MS, which are needed to fully understand its potential, highlighting key areas of application (e.g., single particle-ICP-MS or single cell-ICP-MS) as well as of future development (e.g., micro/nanoplastics).

Identification and Quantification of Nanoplastics in Surface Water and Groundwater by Pyrolysis Gas Chromatography-Mass Spectrometry

Nanoplastics (NPs) are currently considered an environmental pollutant of concern, but the actual extent of NP pollution in environmental water bodies remains unclear and there is not enough quantitative data to conduct proper risk assessments. In this study, a pretreatment method combining ultrafiltration (UF, 100 kDa) with hydrogen peroxide digestion and subsequent detection with pyrolysis gas chromatography-mass spectrometry (Py-GC/MS) was developed and used to identify and quantify six selected NPs in surface water (SW) and groundwater (GW), including poly(vinylchloride) (PVC), poly(methyl methacrylate) (PMMA), polypropylene (PP), polystyrene (PS), polyethylene (PE), and poly(ethylene terephthalate) (PET). The results show that the proposed method could detect NPs in environmental water samples. Nearly all selected NPs could be detected in the surface water at all locations, while PVC, PMMA, PS, and PET NPs were frequently below the detection limit in the groundwater. PP (32.9-69.9%) and PE (21.3-44.3%) NPs were the dominant components in both surface water and groundwater, although there were significant differences in the pollution levels attributed to the filtration efficiency of riverbank, with total mass concentrations of 0.283-0.793 μg/L (SW) and 0.021-0.203 μg/L (GW). Overall, this study quantified the NPs in complex aquatic environments for the first time, filling in gaps in our knowledge about NP pollution levels and providing a useful methodology and important reference data for future research.

Molecular modeling of nanoplastic transformations in alveolar fluid and impacts on the lung surfactant film

Airborne nanoplastics can be inhaled to threaten human health, but research on the inhaled nanoplastic toxicity is in its infancy, and interaction mechanisms are largely unknown. By means of molecular dynamics simulation, we employed spherical nanoplastics of different materials and aging properties to predict and elucidate nanoplastic transformations in alveolar fluid and impacts on the lung surfactant (LS) film at the alveolar air-water interface. Results showed spontaneous adsorption of LS molecules on nanoplastics of 10 nm in diameter, and the adsorption layer can be defined as coronas, which increased the particle size, reduced and equalized the surface hydrophobicity, and endowed nanoplastics with negative surface charges. Nanoplastics of polypropylene and polyvinylchloride materials were dissolved by LS, which could increase bioavailability of polymers and toxic additives. Aging properties represented by the nanoplastic size, polymer's molecular weight and surface chemistry altered nanoplastic transformations through modulating competition between polymer-LS and polymer-polymer interactions. Upon transferred to the alveolar air-water interface through vesicle fusion, nanoplastics could interfere with the normal biophysical function of LS through disrupting the LS ultrastructure and fluidity, and prompting collapse of the LS film. These results provide new molecular level insights into fate and toxicity of airborne nanoplastics in human respiratory system.

Surface-enhanced Raman scattering labeled nanoplastic models for reliable bio-nano interaction investigations

Nanoplastics (NPs) have attracted great attention as an emerging pollution. To date, their interaction with biological systems has been studied mostly by using fluorescent-labeled NPs, which suffered from serious drawbacks such as biological autofluorescence interference and false-positive results. Reliable optically labeled NP models are eagerly desired until now. Herein, a novel near-infrared (NIR) surface-enhanced Raman scattering (SERS) labeled NP model was proposed, which gained single-particle ultra-sensitivity, deep tissue detection, multiplex labeling ability, and anti-interference property. More importantly, the NP demonstrated satisfactory in vivo signal stability which completely prevented the positive-false problems. The advantages of the NPs enabled direct, dynamic in vivo behavior imaging study in living zebrafish embryo, adult zebrafish and green vegetable Brassica rapa. It was found for the first time that NPs entered blood circulation system of zebrafish larva via dermal uptake route, which only occurred in a short 48 h-window post-hatch. NPs widely distributed in roots, shoots and leaves of Brassica rapa seedlings germinating and growing in the NP-containing hydroponic culture. Different depths of one root showed varied adsorption capabilities towards NPs with fulvic acid, lipid and sodium dodecyl sulfate eco-coronas. This work provided an ideal tool for reliable bio-NP interaction study for a variety of organisms, which could promote the research of NPs.

Key knowledge gaps for One Health approach to mitigate nanoplastic risks

There are increasing concerns over the threat of nanoplastics to environmental and human health. However, multidisciplinary barriers persist between the communities assessing the risks to environmental and human health. As a result, the hazards and risks of nanoplastics remain uncertain. Here, we identify key knowledge gaps by evaluating the exposure of nanoplastics in the environment, assessing their bio-nano interactions, and examining their potential risks to humans and the environment. We suggest considering nanoplastics a complex and dynamic mixture of polymers, additives, and contaminants, with interconnected risks to environmental and human health. We call for comprehensive integration of One Health approach to produce robust multidisciplinary evidence to nanoplastics threats at the planetary level. Although there are many challenges, this holistic approach incorporates the relevance of environmental exposure and multi-sectoral responses, which provide the opportunity to identify the risk mitigation strategies of nanoplastics to build resilient health systems.

Effects of nanoplastics on microalgae and their trophic transfer along the food chain: recent advances and perspectives

Nanoplastics (NPs) have drawn increasing attention in recent years due to their potential threats to aquatic ecosystems. Microalgae are primary producers, which play important roles in the normal functioning of ecosystems. According to the source of production and laboratory experiments, both NPs and microalgae are likely to be widely found in various water environments, so they have a great chance of interacting with each other. Although tremendous efforts have been made to explore these potential interactions, a timely and critical review is still missing. In this paper, the effects of NPs on microalgae and their trophic transfer along the food chain are summarized. The toxic impact of NPs on microalgae is tightly associated with the concentrations, sizes and surface charge of NPs, as well as the microalgal species. In addition, NPs could also interact with many other contaminants, thus leading to combined effects on microalgae. NP exposure might block substance and energy exchange between microalgae and their surrounding environment, lead to a shading effect on microalgae, promote the production of reactive oxygen species (ROS) or induce direct physical damage on microalgae, thereby inhibiting the growth of microalgae. Moreover, NPs could also be trophically transferred along the food chain through microalgae and subsequently affect the species at a higher trophic level. Yet importantly, current understanding of the interactions between NPs and microalgae is still quite limited, and needs to be further studied.

Nanoplastic Labelling with Metal Probes: Analytical Strategies for Their Sensitive Detection and Quantification by ICP Mass Spectrometry

The detection and quantification of nanoplastics in aquatic environments is one of the major challenges in environmental and analytical research nowadays. The use of common analytical techniques for this purpose is not only hampered by the size of nanoplastics, but also because they are mainly made of carbon. In addition, the expected concentrations in environmental samples are below the detection limit of the majority of analytical techniques. In this context, the great detection capabilities of Inductively Coupled Plasma Mass Spectrometry (ICP-MS) in its Single Particle mode (SP-ICP-MS) have made of this technique a good candidate for the analysis of nanoplastics. Since the monitoring of carbon by ICP-MS faces several difficulties, the use of metal tags, taking advantage of the great potential of nanoplastics to adsorb chemical compounds, has been proposed as an alternative. In this perspectives paper, three different strategies for the analysis of polystyrene (PS) nanoplastics by SP-ICP-MS based on the use of metals species (ions, hydrophobic organometallic compound, and nanoparticles) as tags are presented and discussed. Advantages and disadvantages of each strategy, which rely on the labelling process, are highlighted. The metal nanoparticles labelling strategy is shown as a promising tool for the detection and quantification of nanoplastics in aqueous matrices by SP-ICP-MS.

Separation and Analysis of Nanoscale Zero-Valent Iron from Soil

Nanoscale zero-valent iron (nZVI) has become one of the most used engineered nanoparticles for soil remediation. However, isolating nZVI particles from a complex soil matrix for their accurate particle characterizations and transport distance measurements is still challenging. Here, this study established a new analysis approach combining ultrasound-assisted solvent extraction, magnetic separation, and single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) analysis to isolate nZVI particles from soils and quantify their concentration and size. The interference from natural Fe-containing substances on nZVI analysis could be efficiently minimized by magnetic separation and dilution. After the optimization of extraction solvent type/concentration (i.e., 2.5 mM tetrasodium pyrophosphate) and ultrasonication time (i.e., 30 min), acceptable recoveries in both particle number (62.0 ± 10.8%-96.1 ± 4.8%) and Fe mass (70.6 ± 12.0%-119 ± 18%) could be achieved for different sizes (50 and 100 nm) and concentrations (50, 100, and 500 μg g^-1) of spiked nZVI from six soils. The detection limits of particle size and concentration were approximately 43.1 nm and 50 μg nZVI per gram soil, respectively. These results provide a feasible approach to quantify the nZVI concentration and size in complex soil matrices, which will allow the improvements to characterize and track the nZVI particles in the field, promote the use of nZVI particles for soil remediation, and better assess their environmental implications.