Iron-Based Dual Active Site-Mediated Peroxymonosulfate Activation for the Degradation of Emerging Organic Pollutants

Magnetic CoFe hydrotalcite composite Co metal-organic framework material efficiently activating peroxymonosulfate to degrade sulfamethoxazole: Oxygen vacancy-mediated radical and non-radical pathways

Herein, a novel rich oxygen vacancy (Ov) cobalt-iron hydrotalcite composite cobalt metal-organic framework material (ZIF-67/CoFe-LDH) was prepared by simple urea water and heat reduction approach and utilized for the peroxymonosulfate (PMS) system to remove sulfamethoxazole (SMX). 95 ± 1.32 % SMX (20 mg/L) was able to degraded in 20 min with TOC removal of 53 ± 1.56 % in ZIF-67/CoFe-LDH/PMS system. The system maintained a fantastic catalytic capability with wide pH range (3-9) and common interfering substances (Cl-, NO3-, CO32-, PO42- and humic acid (HA)), and the degradation efficiency could even remain 80.2 ± 1.48 % at the fifth cycle. Meanwhile, the applicability and feasibility of the catalysts for practical water treatment was verified by the degradation effects of SMX in different water environments and several other typical pollutants. Co and Fe bimetallic active centers synergistically activate PMS, and density functional theory (DFT) predicted adsorption energy about Ov in ZIF-67/CoFe-LDH for PMS was 1.335 eV, and OO bond length of PMS was stretched to 1.826 Å. As a result, PMS was more easily activated and broken, which accelerated the singlet oxygen (1O2), sulfate radical (SO4•-), high-valent metals and other reactive oxygen species (ROS). Radical and non-radical jointly degrading the pollutants improved the catalytic effect. Finally, SMX degradation intermediates were analyzed to explain the degradation pathway and their biotoxicity was also evaluated. This paper provides a new research perspective of oxygen vacancy activating PMS to degrade pollutants.

Atomic-Level Engineered Cobalt Catalysts for Fenton-Like Reactions: Synergy of Single Atom Metal Sites and Nonmetal-Bonded Functionalities

Single atom catalysts (SACs) are atomic-level-engineered materials with high intrinsic activity. Catalytic centers of SACs are typically the transition metal (TM)-nonmetal coordination sites, while the functions of coexisting non-TM-bonded functionalities are usually overlooked in catalysis. Herein, the scalable preparation of carbon-supported cobalt-anchored SACs (CoCN) with controlled Co─N sites and free functional N species is reported. The role of metal- and nonmetal-bonded functionalities in the SACs for peroxymonosulfate (PMS)-driven Fenton-like reactions is first systematically studied, revealing their contribution to performance improvement and pathway steering. Experiments and computations demonstrate that the Co─N3C coordination plays a vital role in the formation of a surface-confined PMS* complex to trigger the electron transfer pathway and promote kinetics because of the optimized electronic state of Co centers, while the nonmetal-coordinated graphitic N sites act as preferable pollutant adsorption sites and additional PMS activation sites to accelerate electron transfer. Synergistically, CoCN exhibits ultrahigh activity in PMS activation for p-hydroxybenzoic acid oxidation, achieving complete degradation within 10 min with an ultrahigh turnover frequency of 0.38 min-1, surpassing most reported materials. These findings offer new insights into the versatile functions of N species in SACs and inspire rational design of high-performance catalysts in complicated heterogeneous systems.

Mediated Peroxymonosulfate Activation at the Single Atom Fe-N3O1 Sites: Synergistic Degradation of Antibiotics by Two Non-Radical Pathways

The activation of persulfates to degrade refractory organic pollutants is a hot issue in advanced oxidation right now. Here, it is reported that single-atom Fe-incorporated carbon nitride (Fe-CN-650) can effectively activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) removal. Through some characterization techniques and DFT calculation, it is proved that Fe single atoms in Fe-CN-650 exist mainly in the form of Fe-N3O1 coordination, and Fe-N3O1 exhibited better affinity for PMS than the traditional Fe-N4 structure. The degradation rate constant of SMX in the Fe-CN-650/PMS system reached 0.472 min-1, and 90.80% of SMX can still be effectively degraded within 10 min after five consecutive recovery cycles. The radical quenching experiment and electrochemical analysis confirm that the pollutants are mainly degraded by two non-radical pathways through 1O2 and Fe(IV)═O induced at the Fe-N3O1 sites. In addition, the intermediate products of SMX degradation in the Fe-CN-650/PMS system show toxicity attenuation or non-toxicity. This study offers valuable insights into the design of carbon-based single-atom catalysts and provides a potential remediation technology for the optimum activation of PMS to disintegrate organic pollutants.

Optimal Oxophilicity at the Fe-Nx Interface Enhances the Generation of Singlet Oxygen for Efficient Fenton-Like Catalysis

In the pursuit of efficient singlet oxygen generation in Fenton-like catalysis, the utilization of single-atom catalysts (SACs) emerges as a highly desired strategy. Here, a discovery is reported that the single-atom Fe coordinated with five N-atoms on N-doped porous carbon, denoted as Fe-N5/NC, outperform its counterparts, those coordinated with four (Fe-N4/NC) or six N-atoms (Fe-N6/NC), as well as state-of-the-art SACs comprising other transition metals. Thus, Fe-N5/NC exhibits exceptional efficacy in activating peroxymonosulfate for the degradation of organic pollutants. The coordination number of N-atoms can be readily adjusted by pyrolysis of pre-assembly structures consisting of Fe3+ and various isomers of phenylenediamine. Fe-N5/NC displayed outstanding tolerance to environmental disturbances and minimal iron leaching when incorporated into a membrane reactor. A mechanistic study reveals that the axial ligand N reduces the contribution of Fe-3d orbitals in LUMO and increases the LUMO energy of Fe-N5/NC. This, in turn, reduces the oxophilicity of the Fe center, promoting the reactivity of *OO intermediate-a pivotal step for yielding singlet oxygen and the rate-determining step. These findings unveil the significance of manipulating the oxophilicity of metal atoms in single-atom catalysis and highlight the potential to augment Fenton-like catalysis performance using Fe-SACs.

Bioinspired axial S-coordinated single-atom cobalt catalyst to efficient activate peroxymonosulfate for selective high-valent Co-Oxo species generation

The efficient activation and selective high-valent metal-oxo (HVMO) species generation remain challenging for peroxymonosulfate (PMS)-based advanced oxidation processes (PMS-AOPs) in water purification. The underlying mechanism of the activation pathway is ambiguous, leading to a massive dilemma in the control and regulation of HVMO species generation. Herein, bioinspired by the bio-oxidase structure of cytochrome P450, the axial coordination strategy was adopted to tailor a single-atom cobalt catalyst (CoN4S-CB) with an axial S coordination. CoN4S-CB high-selectively generated high-valent Co-Oxo species (Co(IV)=O) via PMS activation. Co(IV)=O demonstrated an ingenious oxygen atom transfer (OAT) reaction to achieve the efficient degradation of sulfamethoxazole (SMX), and this allowed robust operation in various complex environments. The axial S coordination modulated the 3d orbital electron distribution of the Co atom. Density functional theory (DFT) calculation revealed that the axial S coordination decreased the energy barrier for PMS desorption and lowered the free energy change (ΔG) for Co(IV)=O generation. CoN4S-PMS* had a narrow d-band close to the Fermi level, which enhanced charge transfer to accelerate the cleavage of O-O and O-H bonds in PMS. This work provides a broader perspective on the activator design with natural enzyme structure-like active sites to efficient activate PMS for selective HVMO species generation.

Single Atom Catalyst in Persulfate Oxidation Reaction: From Atom Species to Substance

With maximum utilization of active metal sites, more and more researchers have reported using single atom catalysts (SACs) to activate persulfate (PS) for organic pollutants removal. In SACs, single metal atoms (Fe, Co, Cu, Mn, etc.) and different substrates (porous carbon, biochar, graphene oxide, carbon nitride, MOF, MoS2, and others) are the basic structural. Metal single atoms, substances, and connected chemical bonds all have a great influence on the electronic structures that directly affect the activation process of PS and degradation efficiency to organic pollutants. However, there are few relevant reviews about the interaction between metal single atoms and substances during PS activation process. In this review, the SACs with different metal species and substrates are summarized to investigate the metal-support interaction and evaluate their effects on PS oxidation reaction process. Furthermore, how metal atoms and substrates affect the reactive species and degradation pathways are also discussed. Finally, the challenges and prospects of SACs in PS-AOPs are proposed.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.

Enhanced thermal desorption of chlorinated hydrocarbons by nanoscale zero-valent iron: the effect of in situ dechlorination

Thermal desorption provides an efficient solution to remediate soil contaminated with chlorinated organic pollutants. However, enhanced desorption efficiency is desired to facilitate easier and less costly remediation. Hence, nanoscale zero-valent iron (nZVI) was combined with thermal desorption to remove trichloroethene (TCE) and trichlorobenzene (TCB) from soil in a laboratory-scale study. The addition of nZVI greatly improved the desorption efficiency, especially at low temperature with 99.6% of TCE and 98.8% of TCB removed at 300 °C for 2 h. Characterization results revealed that the addition of nZVI loosened the structure of soil, preventing the soil from agglomerating during the thermal treatment. Besides, the analyses of dechlorination intermediates and the variation of Fe species proved the in situ dechlorination effect of nZVI and the redox cycle of Fe was revealed. Moreover, the influences of nZVI dosage and treatment time on thermal treatment were assessed. This study not only offers new perspectives for contaminated soil remediation, but also provides mechanistic insights into the dechlorination effect of nZVI in the thermal desorption.

Enhancing Fenton-like reaction through a multifunctional molybdenum disulfide film coating on nano zero valent iron surface (MoS2@nZVI): Collaboration of radical and non-radical pathways

In this study, we synthesized nano zero-valent iron incorporated with a multifunctional molybdenum disulfide film (MoS2@nZVI). The material exhibited a 100.00 % removal efficiency for sulfamethoxazole (SMX) and achieved a kobs of 0.4485 min-1 within 10 min. The excellent degradation performance can be attributed to the incorporation of the MoS2 film, which facilitated Fe2+ regeneration. Simultaneously, the MoS2 film assisted in proton accumulation and electron transfer, thereby amplifying the efficiency of SMX degradation across a wide pH range. Comprehensive experimental examinations and characterizations confirmed the selectivity and stability of the MoS2@nZVI catalysts, encompassing both degradation efficiency and structural stability. Interestingly, the MoS2@nZVI/PMS system for SMX degradation significantly involved a non-radical mechanism (1O2), along with radicals (SO4·-, ·OH, and O2·-). The direct oxidation of PMS by Fe2+ not only facilitated the generation of ·OH and SO4·- but also actively engaged in a reaction with O2, leading to the production of O2·-. The primary pathway for 1O2 production was established through the interplay between Mo6+ and O2·-, in conjunction with the direct electron transfer (DET) mechanism between PMS and SMX. The contributions of these active species to SMX degradation occurred in the following precedence: SO4·- > 1O2 > ·OH > O2·-. Notably, the primary pathways for radicals and non-radicals were studied during separate reaction periods. This investigation proposed a promising approach for mitigating pharmaceutical pollutants using a transition metal sulfide-modified nZVI catalyst.

The correlation between electron exchange capacity of Fenton-like heterogeneous catalyst and catalytic activity

Electron transfer played key role in peroxymonosulfate (PMS) activation for heterogeneous Fenton-like catalysts (HFCs). However, the relationship between electron exchange capacity (EEC) and catalytic activity of HFCs has not been elucidated. Herein, thirteen HFCs reported in our previous studies were selected to measure their EEC via electrochemical methods and to investigate the correlation between EEC and catalytic activity for PMS. The results show that nitrogen-doped graphene oxide had much higher EEC (5.299 mM(e) g-1), followed by reduced graphene oxide (3.23 mM(e) g-1), nitrogen-doped biochar-700 (2.032 mM(e) g-1), graphene oxdie (1.789 mM(e) g-1), nitrogen-doped biochar-300 (1.15 mM(e) g-1), g-C3N4 (0.752 mM(e) g-1) and biochar (0.351 mM(e) g-1). For carbon materials, their catalytic activity was not determined by electron donor capacity (EDC), electron acceptor capacity (EAC) and EEC (EDC + EAC), but was linear correlation with |EDC-EAC| that can characterize the extent of HFCs reacting with PMS. The higher the |EDC-EAC| is, the higher the catalytic activity of HFCs is. For carbonaceous materials, their catalytic activity was not proportional to EAC, but had good linear correlation with EDC and |EDC-EAC|. The discrepancy between carbon materials and carbonaceous materials could be due to the different activation mechanisms. Further analysis found that there was no correlation between EEC and the reactive species derived from PMS, indicating that the produced reactive species was not only controlled by EEC. This study firstly elucidated the correlation between EEC and catalytic activity of HFCs, and |EDC-EAC| could be used as an index for evaluating the catalytic activity of HFCs.

Surface reconstructed Fe@C1000 for enhanced Fenton-like catalysis: Sustainable ciprofloxacin degradation and toxicity reduction

The Fe-based catalysts typically undergo severe problems such as deactivation and Fe sludge emission during the peroxymonosulfate (PMS) activation, which commonly leads to poor operation and secondary pollution. Herein, an S-doped Fe-based catalyst with a core-shell structure (Fe@CT, T = 1000°C) was synthesized, which can solve the above issues via the dynamic surface evolution during the reaction process. Specifically, the Fe0 on the surface of Fe@C1000 could be consumed rapidly, leaving numerous pores; the Fe3C from the core would subsequently migrate to the surface of Fe@C1000, replenishing the consumed active Fe species. The X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses demonstrated that the reaction surface reconstructed during the PMS activation, which involved the FeIII in-situ reduction by S species as well as the depletion/replenishment of effective Fe species. The reconstructed Fe@C1000 achieved near-zero Fe sludge emission (from 0.59 to 0.08-0.23 mg L-1) during 5 cycles and enabled the dynamic evolution of dominant reactive oxygen species (ROS) from SO4·- to FeIVO, sustainably improving the oxidation capacity (80.0-92.5% in following four cycles) to ciprofloxacin (CIP) and reducing the toxicity of its intermediates. Additionally, the reconstructed Fe@C1000/PMS system exhibited robust resistance to complex water matrix. This study provides a theoretical guideline for exploring surface reconstruction on catalytic activity and broadens the application of Fe-based catalysts in the contaminants elimination.

Efficient carbamazepine degradation by modified copper tailings and PMS system: Performance evaluation and mechanism

It is a green and sustainable path to establish cheap solid waste-based catalyst to establish peroxymonosulfate (PMS) catalytic system for the degradation of carbamazepine (CBZ) in water. In this study, durable copper tailing waste residue-based catalyst (CSWR) was prepared, and efficient CSWR/PMS system was constructed for catalytic degradation of CBZ for first time. The morphology and structure of CSWR changed from clumps to porous and loose amorphous by alkali leaching and medium temperature calcination. The reconstructed surface of the CSWR exposes more active sites promotes the catalytic reaction and increases the degradation rate of CBZ by more than 39.8 times. And the CSWR/PMS achieved a CBZ removal of nearly 99.99 % in 20 min. In particular, perovskite-type iron-calcium compounds were formed, which stimulated the production of more HO• and SO4•- in the system. DFT calculation shows that CSWR has stronger adsorption energy and electron transfer ability to PMS molecules, which improved the degradation efficiency of the system. In general, this study proposed a means of high-value waste utilization, which provided a new idea for the preparation of solid waste based environmental functional materials and is expected to be widely used in practical wastewater treatment.

Understanding the Distance Effect of the Single-Atom Active Sites in Fenton-Like Reactions for Efficient Water Remediation

Emerging single-atom catalysts (SACs) are promising in water remediation through Fenton-like reactions. Despite the notable enhancement of catalytic activity through increasing the density of single-atom active sites, the performance improvement is not solely attributed to the increase in the number of active sites. The variation of catalytic behaviors stemming from the increased atomic density is particularly elusive and deserves an in-depth study. Herein, single-atom Fe catalysts (FeSA-CN) with different distances (dsite) between the adjacent single-atom Fe sites are constructed by controlling Fe loading. With the decrease in dsite value, remarkably enhanced catalytic activity of FeSA-CN is realized via the electron transfer regime with peroxymonosulfate (PMS) activation. The decrease in dsite value promotes electronic communication and further alters the electronic structure in favor of PMS activation. Moreover, the two adjacent single-atom Fe sites collectively adsorb PMS and achieve single-site desorption of the PMS decomposition products, maintaining continuous PMS activation and contaminant removal. Moreover, the FeSA-CN/PMS system exhibits excellent anti-interference performance for various aquatic systems and good durability in continuous-flow experiments, indicating its great potential for water treatment applications. This study provides an in-depth understanding of the distance effect of single-atom active sites on water remediation by designing densely populated SACs.

Atomically dispersed dual-atom catalysts: A new rising star in environmental remediation

Single-atom catalysts, characterized by individual metal atoms as active centers, have emerged as promising candidates owing to their remarkable catalytic efficiency, maximum atomic utilization efficiency, and robust stability. However, the limitation of single-atom catalysts lies in their inability to cater to multistep reactions using a solitary active site. Introducing an additional metal atom can amplify the number of active sites, modulate the electronic structure, bolster adsorption ability, and enable a gamut of core reactions, thus augmenting their catalytic prowess. As such, dual-atom catalysts have risen to prominence. However, a comprehensive review elucidating the realm of dual-atom catalysts in environmental remediation is currently lacking. This review endeavors to bridge this gap, starting with a discourse on immobilization techniques for dual-atom catalysts, which includes configurations such as adjacent atoms, bridged atoms, and co-facially separated atoms. The review then delves into the intrinsic activity mechanisms of these catalysts, elucidating aspects like adsorption dynamics, electronic regulation, and synergistic effects. Following this, a comprehensive summarization of dual-atom catalysts for environmental applications is provided, spanning electrocatalysis, photocatalysis, and Fenton-like reactions. Finally, the existing challenges and opportunities in the field of dual-atom catalysts are extensively discussed. This work aims to be a beacon, illuminating the path towards the evolution and adoption of dual-atom catalysts in environmental remediation.

Advanced treatment of coking wastewater: Recent advances and prospects

Advanced treatment of refractory industrial wastewater is still a challenge. Coking wastewater is one of coal chemical wastewater, which contains various refractory organic pollutants. To meet the more and more rigorous discharge standard and increase the reuse ratio of coking wastewater, advanced treatment process must be set for treating the biologically treated coking wastewater. To date, several advanced oxidation processes (AOPs), including Fenton, ozone, persulfate-based oxidation, and iron-carbon micro-electrolysis, have been applied for the advanced treatment of coking wastewater. However, the performance of different advanced treatment processes changed greatly, depending on the components of coking wastewater and the unique characteristics of advanced treatment processes. In this review article, the state-of-the-art advanced treatment process of coking wastewater was systematically summarized and analyzed. Firstly, the major organic pollutants in the secondary effluents of coking wastewater was briefly introduced, to better understand the characteristics of the biologically treated coking wastewater. Then, the performance of various advanced treatment processes, including physiochemical methods, biological methods, advanced oxidation methods and combined methods were discussed for the advanced treatment of coking wastewater in detail. Finally, the conclusions and remarks were provided. This review will be helpful for the proper selection of advanced treatment processes and promote the development of advanced treatment processes for coking wastewater.

Efficient activation of peroxymonosulfate by Fe single-atom: The key role of Fe-pyrrolic nitrogen coordination in generating singlet oxygen and high-valent Fe species

Nitrogen-doped carbon matrix single-atom catalysts (SACs) for the efficient removal of organic pollutants have attracted widespread attention. However, the ligand structure and the origin of the high activity between nitrogen species and single-atoms remain elusive. Herein, nitrogen-doped carbon matrix iron single-atom catalysts (Fe/NC-SACs) that exhibit high catalytic reactivity (98.2% SMX degradation in 5 min), broad pH resistance (pH 3.0-11.1), high stability, and sustainable water treatment capacity are reported. High-valent iron (Fe IV=O) and singlet oxygen (1O2) were the reactive oxygen species observed. The electrochemical results demonstrated the generation of catalyst-PMS complexes. The DFT calculations revealed that Fe-pyrrolic N4 was the best ligand for PMS, exhibiting the highest adsorption energy, bond length variation and electron transfer capacity. The central Fe single atom and the carbon electrons adjacent to the pyrrolic N were the reactive sites of the PMS. The main source of 1O2 was the oxidation of PMS. This work provides guidance for the discovery of high-performance catalysts and provides a single-atom catalyst that can be used for practical environmental purification.

Singlet oxygen: Properties, generation, detection, and environmental applications

Singlet oxygen (1O2) is molecular oxygen in the excited state with high energy and electrophilic properties. It is widely found in nature, and its important role is gradually extending from chemical syntheses and medical techniques to environmental remediation. However, there exist ambiguities and controversies regarding detection methods, generation pathways, and reaction mechanisms which have hindered the understanding and applications of 1O2. For example, the inaccurate detection of 1O2 has led to an overestimation of its role in pollutant degradation. The difficulty in detecting multiple intermediate species obscures the mechanism of 1O2 production. The applications of 1O2 in environmental remediation have also not been comprehensively commented on. To fill these knowledge gaps, this paper systematically discussed the properties and generation of 1O2, reviewed the state-of-the-art detection methods for 1O2 and long-standing controversies in the catalytic systems. Future opportunities and challenges were also discussed regarding the applications of 1O2 in the degradation of pollutants dissolved in water and volatilized in the atmosphere, the disinfection of drinking water, the gas/solid sterilization, and the self-cleaning of filter membranes. This review is expected to provide a better understanding of 1O2-based advanced oxidation processes and practical applications in the environmental protection of 1O2.

Iron 3D-Orbital Configuration Dependent Electron Transfer for Efficient Fenton-Like Catalysis

Transition metals are excellent active sites to activate peroxymonosulfate (PMS) for water treatment, but the favorable electronic structures governing  reaction mechanism still remain elusive. Herein, the authors construct typical d-orbital configurations on iron octahedral (FeOh ) and tetrahedral (FeTd ) sites in spinel ZnFe2 O4 and FeAl2 O4 , respectively. ZnFe2 O4 (136.58 min-1 F-1 cm2 ) presented higher specific activity than FeAl2 O4 (97.47 min-1 F-1 cm2 ) for tetracycline removal by PMS activation. Considering orbital features of charge amount, spin state, and orbital arrangement by magnetic spectroscopic analysis, ZnFe2 O4 has a larger bond order to decompose PMS. Using this descriptor, high-spin FeOh is assumed to activate PMS mainly to produce nonradical reactive oxygen species (ROS) while high-spin FeTd prefers to induce radical species. This hypothesis is confirmed by the selective predominant ROS of 1 O2 on ZnFe2 O4 and O2 •- on FeAl2 O4 via quenching experiments. Electrochemical determinations reveal that FeOh has superior capability than FeTd for feasible valence transformation of iron cations and fast interfacial electron transfer. DFT calculations further suggest octahedral d-orbital configuration of ZnFe2 O4 is beneficial to enhancing Fe-O covalence for electron exchange. This work attempts to understand the d-orbital configuration-dependent PMS activation to design efficient catalysts.

Interaction between antibiotics and microplastics: Recent advances and perspective

Both microplastics and antibiotics are emerging pollutants, which are ubiquitous in aquatic environments. With small size, high specific surface area, and attached biofilm, microplastics are capable of adsorbing or biodegrading antibiotic pollutants across aquatic environments. However, the interactions between them are poorly understood, especially factors that affect microplastics' chemical vector effects and the mechanisms driving these interactions. In this review, the properties of microplastics and their interaction behavior and mechanisms towards antibiotics were comprehensively summarized. Particularly, the impact of weathering properties of microplastics and the growth of attached biofilm was highlighted. We concluded that compared with virgin microplastics, aged microplastics usually adsorb more types and quantities of antibiotics from aquatic environments, whilst the attached biofilm could further enhance the adsorption capacities and biodegrade some antibiotics. This review can answer the knowledge gaps of the interaction between microplastics and antibiotics (or other pollutants), offer basic information for evaluating their combined toxicity, provide insights into the distribution of both emerging pollutants in the global water chemical cycle, and inform measures to remove microplastic-antibiotic pollution.

Catalytic activity and reaction mechanisms of single-atom metals anchored on nitrogen-doped carbons for peroxymonosulfate activation

Single-atom catalysts have attracted tremendous interests in peroxymonosulfate (PMS)-based advanced oxidation processes due to their maximum atom utilization and high reactivity, however the role of nitrogen-coordinated metal (MNx) sites with different metal centers remain blurred. Herein, a series of single-atom metals anchored on nitrogen-doped carbons (denoted as M-N/C, M = Fe, Co, Cu, and Mn) using zeolitic imidazolate frameworks as precursors are constructed for PMS activation. Their catalytic activity order follows Fe > Co > undoped N/C > Cu > Mn, especially the degradation rates of the eight model pollutants for Fe-N/C and Co-N/C are 2.5-22.4 and 1.5-19.5 times higher than those for undoped N/C, respectively. Moreover, the nature of catalytic metal center can govern the degradation behaviors in the coexisting water constituents. Experimental and theoretical results reveal that singlet oxygen (1O2) is the main oxidant responsible for pollutant degradation and its evolution path over FeN4 or CoN4 sites (PMS→OH*→*O→1O2) is elucidated, between which FeN4 with lower energy barrier is more conducive to 1O2 generation. This study can not only provide guidance for the development of highly active atomic M-N/C catalysts, but also lead to a better molecular-level understanding of PMS activation mechanism over MN4 sites.

Insights into the electron activation mechanisms at the micro level by nano zero-valent iron supported by molybdenum disulfide (nZVI@MD) from preparation to application

Both molybdenum disulfide (MoS2) and nano zero-valent iron (nZVI) exhibit excellent adsorption abilities. However, the constrained conductivity of MoS2 and the lack of selectivity of nZVI for electron transfer still pose challenges. In this study, we designed a series of novel nano zero-valent iron supported by molybdenum disulfide composites (nZVI@MD) with multiple electron-rich active sites, including iron dopant replacement, iron atom intercalation and exposed Mo4+, for effective removal of Cr(VI). Results showed that preparation temperature and the amount of MoS2 added were identified as the two most significant factors affecting the reduction properties of nZVI@MD. Systematic experiments revealed that the nZVI@MD exhibited good anti-interference performance, stability and reusability due to its excellent electron selectivity. Characterization results exhibited that iron atoms replaced the sulfur vacancies in MoS2 and inserted into an intercalation of MoS2 during the preparation process. The mechanisms underlying the uptake of Cr(VI) by nZVI@MD can be proposed as follows: (i) electrostatic interactions, (ii) reduction reaction, and (iii) co-precipitation involving Fe-O-Cr. Furthermore, nZVI@MD exhibited excellent electron activity, hydrophilicity and oxidation resistance, confirmed by density functional theory (DFT) calculations. This work provided new strategies and mechanistic insights for the rational design of adsorbents.

Rapid self-heating synthesis of Fe-based nanomaterial catalyst for advanced oxidation

Iron-based catalysts are promising candidates for advanced oxidation process-based wastewater remediation. However, the preparation of these materials often involves complex and energy intensive syntheses. Further, due to the inherent limitations of the preparation conditions, it is challenging to realise the full potential of the catalyst. Herein, we develop an iron-based nanomaterial catalyst via soft carbon assisted flash joule heating (FJH). FJH involves rapid temperature increase, electric shock, and cooling, the process simultaneously transforms a low-grade iron mineral (FeS) and soft carbon into an electron rich nano Fe0/FeS heterostructure embedded in thin-bedded graphene. The process is energy efficient and consumes 34 times less energy than conventional pyrolysis. Density functional theory calculations indicate that the electron delocalization of the FJH-derived heterostructure improves its binding ability with peroxydisulfate via bidentate binuclear model, thereby enhancing ·OH yield for organics mineralization. The Fe-based nanomaterial catalyst exhibits strong catalytic performance over a wide pH range. Similar catalysts can be prepared using other commonly available iron precursors. Finally, we also present a strategy for continuous and automated production of the iron-based nanomaterial catalysts.

Nitrogen-doped carbon materials prepared using different organic precursors as catalysts of peroxymonosulfate to degrade sulfamethoxazole: First-time performance leading to the incorrect selection of the best catalyst

Nitrogen-doped carbon materials are effective catalysts for peroxymonosulfate (PMS) activation to eliminate organic contaminants. In this research, the activity of nitrogen-doped carbon materials was significantly improved by optimizing the carbon source, and the reusability of the catalyst is used to select the best catalyst instead of depending on the performance in the first use, for avoiding the "short-life" catalyst with great initial activity. Fixing ferric nitrate nonahydrate and melamine as the metal and nitrogen sources, four catalysts were prepared using glucose, glucosamine hydrochloride, dopamine, and trimesic acid as the carbon sources, respectively. Based on the performance in PMS activation for sulfamethoxazole (SMX) removal, in the first use, the activity was Fe-DA-CN (carbon source: dopamine) > Fe-BTC-CN (carbon source: trimesic acid) > Fe-GLU-CN (carbon source: glucosamine) > Fe-DGLU-CN (carbon source: glucose). With no washing for the second time use, the activity was Fe-BTC-CN (0.135 min^-1) ≫ Fe-DA-CN (0.037 min^-1) > Fe-GLU-CN (0.032 min^-1) > Fe-DGLU-CN (0.017 min^-1). The large specific surface area, superior graphitization, and high CO/C-N group content endow Fe-BTC-CN with high ability in PMS activity. Surface-bound radicals are responsible for SMX elimination, and most of the SMX degradation intermediates have lower ecotoxicity than SMX.

Enhanced arsenite removal from water using zirconium-ferrocene MOFs coupled with peroxymonosulfate:oxidation and multi-sites adsorption mechanism

The efficient removal of arsenite (As(III)) poses a significant challenge to traditional water treatment technologies due to its high toxicity and mobility. In this work, multifunctional Zirconium-Ferrocene Metal Organic Framework (ZrFc-MOF) fabricated with redox-active 1,1-ferrocene dicarboxylic acid ligands and Zr⁴⁺ precursors were elaborated to achieve remarkably enhanced As(III) removal via activation by peroxymonosulfate (PMS). The adsorption affinity coefficient increased from 0.097 to 2.035 L mg^-1 and the maximum adsorption capacity increased from 59.79 to 111.34 mg g^-1 compared with that without PMS. Besides the conventional homogeneous PMS oxidation and the following adsorption through Zr-O clusters of ZrFc-MOFs, the enhanced As(III) removal synergistic combines the oxidation mechanism of As(III) by reactive oxygen species (•OH, SO₄^•-, O₂^•- and ¹O₂) formed in Ferrocene (Fc) activating PMS process with the simultaneous formed extra adsorption sites of Ferrocenium (Fc⁺). PMS also help ZrFc-MOF to avoid destruction in harsh alkaline condition, making the effluent in this advanced treatment meet the World Health Organization (WHO) threshold of 10 μg L^-1 over a wide range of initial pH (2-11) with high selectivity and durability. These results indicate that this novel Fc-based MOFs activating PMS system has potential applicability for As(III) in oxidation and selectively capturing in the water environment.

Electron transfer enhancing the Mn(II)/Mn(III) cycle in MnO/CN towards catalytic ozonation of atrazine via a synergistic effect between MnO and CN

In this study, manganese oxide (MnO) dispersed on CN (Mn-nCN) was fabricated as a catalyst in heterogeneous catalytic ozonation (HCO), achieving excellent catalytic performance on refractory organic pollutant degradation via the synergistic effects between MnO and CN. The study demonstrated that the C-N-Mn and C-O-Mn bonds constructed in the catalyst linking MnO and CN created the synergistic effects which could overcome typical problems, such as metal leaching etc. The C-N-Mn and C-O-Mn bonds could promote electron transfer from cation-π reactions to form electron-rich Mn(II) sites and electron-poor CN sites. The electron-rich Mn(II) sites as active sites supplied electrons to ozone which then further evolved into reactive oxygen species (ROS). The electron-poor CN sites captured electrons from the pollutant intermediate radicals to electron-rich Mn(II) sites via cation-π reactions with the help of C-N-Mn and C-O-Mn bonds, which promote the redox reactions of Mn. The surface hydroxyl groups also participated in ozone decomposition and ROS production. Additionally, ^•OH was the dominant ROS of the Mn-nCN HCO processes. This study presents the excellent HCO performance of Mn-nCN, as well as provides views on the electron transfer route between the catalyst, pollutant and ozone, which is crucial for the design of the catalyst.

Selective oxidation of ammonia to dinitrogen gas by facile Co2+/PMS/chloridion process through reactive chlorine radicals

The selective oxidation of ammonia to dinitrogen gas in some special wastewater is of paramount significance, but still a challenge. In this study, chlorine radical (Cl•)-mediated oxidation process was developed to realize the selective oxidation of NH₄⁺-N to N₂, in which Cl• was generated in Co²⁺/peroxymonosulfate (PMS)/chloridion (Cl^-) system. The effect of various operational parameters on the efficiency and selectivity of ammonia oxidation to N₂ was investigated, such as PMS concentration, Co²⁺ concentration, Cl^- concentration and pH value. The experiment results showed that Cl•-mediated NH₄⁺-N oxidation reaction exhibited high NH₄⁺-N removal efficiency and considerable selectivity to N₂ in the range of pH from 2.0 to 6.5. The removal efficiency of NH₄⁺-N was 90.39%, and the selectivity of NH₄⁺-N to N₂ achieved up to 97.16%. The possible mechanism for high efficient and selective oxidation of NH₄⁺-N to N₂ was tentatively proposed. The process developed in this study could provide a novel technology for the treatment and selective oxidation of ammonium in some special types of ammonium-containing wastewater.

Understanding the nonradical activation of peroxymonosulfate by different crystallographic MnO2: The pivotal role of MnIII content on the surface

Manganese oxide-activated persulfate plays a critical role in water purification and in situ chemical oxidation processes, but the underlying mechanism needs to be further revealed. Herein, the detailed mechanism of MnO₂ with various crystallographic structures (α-, β-, γ-, and δ-MnO₂) towards peroxymonosulfate (PMS) activation was investigated. PMS activated by tunnel structured α-, β-, and γ-MnO₂ showed higher acetaminophen (ACE) removal than layer structured δ-MnO₂ with the removal efficiency following an order of α-MnO₂ (85%) ≈ γ-MnO₂ (84%) > β-MnO₂ (65%) > δ-MnO₂ (31%). Integrated with chemical quenching experiments, electron paramagnetic resonance, Raman spectra, X-ray photoelectron spectroscopy, and Langmuir-Hinshelwood model on kinetic data, both surface-bound PMS complexes and direct oxidation by surface manganese species (Mn^{(Ⅳ, Ⅲ)}_(s)) were disclosed as the dominant oxidation mechanism for ACE degradation in α-, β-, and γ-MnO₂/PMS, which were rarely observed in previous reports. Moreover, the catalytic activity of α-, β-, and γ-MnO₂ was positively correlated to the Mn^III_(s) content on the catalyst surface. Higher content of Mn^III_(s) would stimulate the generation of more oxygen vacancies, which was conducive to the adsorption of PMS and the formation of reactive complexes. Overall, this study might provide deeper insight into the nonradical activation mechanism of PMS over different crystallographic MnO₂.

Insights into singlet oxygen generation and electron-transfer process induced by a single-atom Cu catalyst with saturated Cu-N4 sites

Persulfate-based nonradical oxidation processes are appealing in water treatment for the efficient and selective degradation of trace contaminants in complex water matrices. However, there is still lacking of systematic understanding of the relationship between multiple nonradical pathways and the active sites of catalyst. Herein, a single-atom Cu catalyst with saturated Cu-N₄ sites on a carbon substrate (SA-Cu-NC) was constructed to activate peroxymonosulfate (PMS), which exhibited high catalytic performance and selectivity for pollutant degradation in different water conditions. Combined with the results of density functional theory (DFT) calculations, the electron-rich area around Cu site and the electron-poor area around C site in the saturated Cu-N₄ configuration could efficiently adsorb and activate PMS, which promoted pollutant degradation through the oxidation of singlet oxygen (¹O₂) and electron transfer process, respectively. This study advances the understanding of the saturated coordination structure of metals and the superiority of multiple nonradical pathways in wastewater treatment.

•

Single-atom Cu catalyst with Cu-N₄ sites (SA-Cu-NC) was constructed

•

The saturated Cu-N₄ configuration provides two PMS activation sites

•

¹O₂ and electron transfer process were the dominant PMS activation pathways

•

Dual nonradical pathways exhibited superiority for pollutant degradation

Unveiling the Origins of Selective Oxidation in Single-Atom Catalysis via Co-N4-C Intensified Radical and Nonradical Pathways

Single-atom catalysts (SACs)-based peroxymonosulfate (PMS) systems are highly selective to the type of organic pollutants while the mechanisms remain ambiguous. In this work, we carried out experimental and theoretical investigations to reveal the origins of selectivity of radical and nonradical pathways in a designated Co-N₄-C/PMS system. Two typical pollutants [bisphenol A (BPA) and metronidazole (MNZ)] with different molecular structures were employed for comparison. We found that radical oxidation (SO₄^•- and HO^•) and nonradical electron-transfer pathway (ETP) co-existed in the Co-N₄-C/PMS system. Pollutants (e.g., MNZ) with a high redox potential were degraded primarily by free radicals rather than ETP, while the oxidization of low-redox pollutants (e.g., BPA) was dominated by ETP at the surface region of Co-N₄-C which overwhelmed the contributions of radicals in the homogeneous phase. Intriguingly, the contributions of radical and nonradical pathways could be manipulated by the PMS loading, which simultaneously increased the radical population and elevated the oxidation potential of Co-N₄-C-PMS* complexes in ETP. Findings from this work will unravel the mysterious selective behavior of the SACs/PMS systems in the oxidation of different micropollutants.

Degradation of sulfamethoxazole using PMS activated by cobalt sulfides encapsulated in nitrogen and sulfur co-doped graphene

In this study cobalt sulfides (Co₉S₈) coated on the nitrogen and sulfur co-doped graphene (Co₉S₈@S-N-RG) was firstly prepared and used for degradation of antibiotic sulfamethoxazole (SMX). The results showed that SMX could be completely degraded by Co₉S₈@S-N-RG-activated peroxymonosulfate (PMS) within 20 min with its mineralization efficiency of 38.7%. The SMX degradation rate followed pseudo first-order kinetics with kinetic constant of 0.377 min^-1 that was higher than that induced by Co₉S₈, N-RG, S-N-RG and Co₉S₈@S-RG, indicating Co₉S₈@S-N-RG had superior catalytic activity. Co₉S₈@S-N-RG can activate PMS to produce sulfate radicals and hydroxyl radicals, while sulfate radicals played major role. Co₉S₈ participated in PMS activation in which Co²⁺ was involved in sulfate radicals formation, while sulfur species facilitated the conversion of Co³⁺ to Co²⁺. In addition, carbon defects, CO, pyridinic N and pyrrolic N also contributed to PMS activation.The superior catalytic activity was attributed to the synergistic effect of Co₉S₈ and S-N-RG. This study could provide an efficient and stable PMS activator, and insight into the PMS activation mechanism by Co₉S₈@S-N-RG.

Origin of the Excellent Activity and Selectivity of a Single-Atom Copper Catalyst with Unsaturated Cu-N2 Sites via Peroxydisulfate Activation: Cu(III) as a Dominant Oxidizing Species

As an efficient active oxidant for the selective degradation of pollutants in wastewater, the high-valent copper species Cu(III) with persulfate activation has attracted substantial attention in some Cu-based catalysts. However, the systematic study of a catalyst structure and mechanism about Cu(III) with peroxydisulfate (PDS) activation is challenging owing to the coexistence of multiple Cu species and the structural symmetry of PDS. Herein, we anchored a Cu atom with two pyridinic N atoms to synthesize a single-atom Cu catalyst (Cu_SA-NC). Experimental characterizations and theoretical calculations complemented each other well because of the uniform atomic active sites. The single-atom Cu was identified as the active site, and the unsaturated Cu-N₂ configuration was more conductive to PDS activation than the saturated Cu-N₄ configuration. Benefiting from the generation of Cu(III), Cu_SA-NC exhibited an obvious selective and anti-interference performance for pollutant degradation in a complex matrix. The superior catalytic activity of Cu_SA-NC compared with that of other reported Cu-based catalysts and good durability in a continuous-flow experiment further revealed the potential of Cu_SA-NC for practical applications. This work strongly deepens the understanding of the generation of Cu(III) in a single-atom Cu catalyst with unsaturated Cu-N₂ sites under PDS activation and develops an efficient approach for actual water purification.

Simultaneous biological removal of nitrogen and phosphorus from secondary effluent of wastewater treatment plants by advanced treatment: A review

With the advancement of water ecological protection and water control standard, it is the general trend to upgrade the wastewater treatment plants (WWTPs). The simultaneous removal of nitrogen and phosphorus is the key to improve the water quality of secondary effluent of WWTPs to prevent the eutrophication. Therefore, it is urgent to develop the applicable technologies for simultaneous biological removal of nitrogen and phosphorus from secondary effluent. In this review, the composition of secondary effluent from municipal WWTPs were briefly introduced firstly, then the three main treatment processes for simultaneous nitrogen and phosphorus removal, i.e., the enhanced denitrifying phosphorus removal filter, the pyrite-based autotrophic denitrification and the microalgae biological treatment system were summarized, their performances and mechanisms were analyzed. The influencing factors and microbial community structure were discussed. The advanced removal of nitrogen and phosphorus by different technologies were also compared and summarized in terms of performance, operational characteristics, disadvantage and cost. Finally, the challenges and future prospects of simultaneous removal of nitrogen and phosphorus technologies for secondary effluent were proposed. This review will deepen to understand the principles and applications of the advanced removal of nitrogen and phosphorus and provide some valuable information for upgrading the treatment process of WWTPs.