Degradation Rates and Bacterial Community Compositions Vary among Commonly Used Bioplastic Materials in a Brackish Marine Environment

Bioplastic packaging in circular economy: A systems-based policy approach for multi-sectoral challenges

Bioplastics have long been publicized as a sustainable plastic packaging alternative; however, their widespread industrialization is still embryonic due to complex challenges spanning multiple sectors. This review critically analyses the bioplastic lifecycle and provides a holistic evaluation of both the opportunities and potential trade-offs along their value chain. Their lifecycle is divided into three sectors: 1) resources, extraction, and manufacturing, 2) product consumption which discusses availability, consumer perception, and marketing strategies, and 3) end-of-life (EoL) management which includes segregation, recycling, and disposal. In the production phase, the primary challenges include selection of suitable raw feedstocks and addressing the techno-economic constraints of manufacturing processes. To tackle these challenges, it is recommended to source sustainable feedstocks from innovative, renewable, and waste materials, adopt green synthesis mechanisms, and optimize processes for improved efficiency. The consumption phase encompasses challenges related to market availability, cost competitiveness, and consumer perception of bioplastics. Localizing feedstock sourcing and production, leveraging the economics of scale, and promoting market demand for recycled bioplastics can positively influence the market dynamics. Additionally, dispelling misconceptions about degradability through proper labeling, and employing innovative marketing strategies to enhance consumer perception of the mechanical performance and quality of bioplastics is crucial. During the EoL management phase, major challenges include inadequate awareness, inefficient segregation protocols, and bioplastics with diverse properties that are incompatible with existing waste management infrastructure. Implementing a standardized labeling system with clear representation of suitable EoL techniques and integrating sensors and machine learning-based sorting technologies will improve segregation efficiency. Further, establishing interconnected recycling streams that clearly define the EoL pathways for different bioplastics is essential to ensure circular waste management systems. Finally, designing a comprehensive systems-based policy framework that incorporates technical, economic, environmental, and social drivers is recommended to promote bioplastics as a viable circular packaging solution.

Degradation efficiency of biodegradable plastics in subtropical open-air and marine environments: Implications for plastic pollution

Bioplastics are increasingly used as a solution to tackle plastic pollution problems. However, their degradability in natural environments is currently under debate. To evaluate their degradation efficiencies, we conducted in-situ degradation experiments in an open-air and two marine environments in Hong Kong. Three groups of biodegradable plastic were tested, namely (1) additive-modified low-density polyethylene (LDPE), labelled as oxo-biodegradable or photodegradable plastics, (2) polylactic acid (PLA), and (3) polyvinyl alcohol (PVA)/starch blends. Most biodegradable plastics fail to completely degrade but remain visually present after six months of exposure. Only PLA is able to demonstrate 100 % disintegration in one to three months in marine settings, suggesting that subtropical marine environments may favor PLA degradation. Biodegradable plastics that are bio-based (PLA and PVA/Starch blends) show notably larger mass losses by 23-100 % than the fossil-based ones (modified-LDPE). Our results reveal higher degradation efficiencies of PLA and PVA/Cassava starch blend in marine than open-air settings (with mass losses larger by 50 %, and by 39-41 %, respectively), potentially via biodegradation and hydrolysis. Meanwhile, modified-LDPE and PVA/Corn starch blends in general show higher degradation efficiencies in open-air than marine settings (with mass losses larger by 2 %, and by 17-33 %, respectively), potentially via abiotic oxidation. Since all tested biodegradable plastics exhibit potential fragmentation signs, further investigation is needed to characterize the behaviours of the microplastics generated. The current labelling on biodegradable bags fails to provide comprehensive information regarding their actual environmental degradation behaviours, especially considering their fragmentation risk and limited degradation exhibited in this study. This highlights the imperative for improved messaging to ensure consumers are better informed about these products.

A progress update on the biological effects of biodegradable microplastics on soil and ocean environment: A perfect substitute or new threat?

Conventional plastics are inherently difficult to degrade, causing serious plastic pollution. With the development of society, biodegradable plastics (BPs) are considered as an alternative to traditional plastics. However, current research indicated that BPs do not undergo complete degradation in natural environments. Instead, they may convert into biodegradable microplastics (BMPs) at an accelerated rate, thereby posing a significant threat to environment. In this paper, the definition, application, distribution, degradation behaviors, bioaccumulation and biomagnification of BPs were reviewed. And the impacts of BMPs on soil and marine ecosystems, in terms of physicochemical property, nutrient cycling, microorganisms, plants and animals were comprehensively summarized. The effects of combined exposure of BMPs with other pollutants, and the mechanism of ecotoxicity induced by BMPs were also addressed. It was found that BMPs reduced pH, increased DOC content, and disrupted the nitrification of nitrogen cycle in soil ecosystem. The shoot dry weight, pod number and root growth of soil plants, and reproduction and body length of soil animals were inhibited by BMPs. Furthermore, the growth of marine plants, and locomotion, body length and survival of marine animals were suppressed by BMPs. Additionally, the ecotoxicity of combined exposure of BMPs with other pollutants has not been uniformly concluded. Exposure to BMPs induced several types of toxicity, including neurotoxicity, gastrointestinal toxicity, reproductive toxicity, immunotoxicity and genotoxicity. The future calls for heightened attention towards the regulation of the degradation of BPs in the environment, and pursuit of interventions aimed at mitigating their ecotoxicity and potential health risks to human.

Biofilm of petroleum-based and bio-based microplastics in seawater in response to Zn(II): Biofilm formation, community structure, and microbial function

Microplastic biofilms are novel vectors for the transport and spread of pathogenic and drug-resistant bacteria. With the increasing use of bio-based plastics, there is an urgent need to investigate the microbial colonization characteristics of these materials in seawater, particularly in comparison with conventional petroleum-based plastics. Furthermore, the effect of co-occurring contaminants, such as heavy metals, on the formation of microplastic biofilms and bacterial communities remains unclear. In this study, we compared the biofilm bacterial community structure of petroleum-based polyethylene (PE) and bio-based polylactic acid (PLA) in seawater under the influence of zinc ions (Zn2+). Our findings indicate that the biofilm on PLA microplastics in the late stage was impeded by the formation of a mildly acidic microenvironment resulting from the hydrolysis of the ester group on PLA. The PE surface had higher bacterial abundance and diversity, with a more intricate symbiotic pattern. The bacterial structures on the two types of microplastics were different; PE was more conducive to the colonization of anaerobic bacteria, whereas PLA was more favorable for the colonization of aerobic and acid-tolerant species. Furthermore, Zn increased the proportion of the dominant genera that could utilize microplastics as a carbon source, such as Alcanivorax and Nitratireductor. PLA had a greater propensity to harbor and disseminate pathogenic and drug-resistant bacteria, and Zn promoted the enrichment and spread of harmful bacteria such as, Pseudomonas and Clostridioides. Therefore, further research is essential to fully understand the potential environmental effects of bio-based microplastics and the role of heavy metals in the dynamics of bacterial colonization.

Catalytic and biocatalytic degradation of microplastics

In recent years, there has been a surge in annual plastic production, which has contributed to growing environmental challenges, particularly in the form of microplastics. Effective management of plastic and microplastic waste has become a critical concern, necessitating innovative strategies to address its impact on ecosystems and human health. In this context, catalytic degradation of microplastics emerges as a pivotal approach that holds significant promise for mitigating the persistent effects of plastic pollution. In this article, we critically explored the current state of catalytic degradation of microplastics and discussed the definition of degradation, characterization methods for degradation products, and the criteria for standard sample preparation. Moreover, the significance and effectiveness of various catalytic entities, including enzymes, transition metal ions (for the Fenton reaction), nanozymes, and microorganisms are summarized. Finally, a few key issues and future perspectives regarding the catalytic degradation of microplastics are proposed.

One-Pot Biosynthesis of Acetone from Waste Poly(hydroxybutyrate)

The plastic waste crisis is catalyzing change across the plastics life cycle. Central to this is increased production and application of bioplastics and biodegradable plastics. In particular, poly(hydroxybutyrate) (PHB) is a biodegradable bioplastic that can be produced from various renewable and waste feedstocks and is a promising alternative to some petrochemical-derived and non-biodegradable plastics. Despite its advantages, PHB biodegradation depends on environmental conditions, and the effects of degradation into microplastics, oligomers, and the 3-hydroxybutyrate (3-HB) monomer on soil microbiomes are unknown. We hypothesized that the ease of PHB biodegradation renders this next-generation plastic an ideal feedstock for microbial recycling into platform chemicals currently produced from fossil fuels. To demonstrate this, we report the one-pot degradation and recycling of PHB into acetone using a single strain of engineered Escherichia coli. Following strain development and initial bioprocess optimization, we report maximum titers of 123 mM acetone (7 g/L) from commercial PHB granules after 24 h fermentation at 30 °C. We further report biorecycling of an authentic sample of post-consumer PHB waste at a preparative scale. This is the first demonstration of biological recycling of PHB into a second-generation chemical, and it demonstrates next-generation plastic waste as a novel feedstock for the circular bioeconomy.

Exploring the hidden environmental pollution of microplastics derived from bioplastics: A review

Bioplastics might be an ecofriendly alternative to traditional plastics. However, recent studies have emphasized that even bioplastics can end up becoming micro- and nano-plastics due to their degradation under ambient environmental conditions. Hence, there is an urgent need to assess the hidden environmental pollution caused by bioplastics. However, little is known about the evolutionary trends of bibliographic data, degradation pathways, formation, and toxicity of micro- and nano-scaled bioplastics originating from biodegradable polymers such as polylactic acid, polyhydroxyalkanoates, and starch-based plastics. Therefore, the prime objective of the current review was to investigate evolutionary trends and the latest advancements in the field of micro-bioplastic pollution. Additionally, it aims to confront the limitations of existing research on microplastic pollution derived from the degradation of bioplastic wastes, and to understand what is needed in future research. The literature survey revealed that research focusing on micro- and nano-bioplastics has begun since 2012. This review identifies novel insights into microbioplastics formation through diverse degradation pathways, including photo-oxidation, ozone-induced degradation, mechanochemical degradation, biodegradation, thermal, and catalytic degradation. Critical research gaps are identified, including defining optimal environmental conditions for complete degradation of diverse bioplastics, exploring micro- and nano-bioplastics formation in natural environments, investigating the global occurrence and distribution of these particles in diverse ecosystems, assessing toxic substances released during bioplastics degradation, and bridging the disparity between laboratory studies and real-world applications. By identifying new trends and knowledge gaps, this study lays the groundwork for future investigations and sustainable solutions in the realm of sustainable management of bioplastic wastes.

Freshwater plastisphere: a review on biodiversity, risks, and biodegradation potential with implications for the aquatic ecosystem health

The plastisphere, a unique microbial biofilm community colonizing plastic debris and microplastics (MPs) in aquatic environments, has attracted increasing attention owing to its ecological and public health implications. This review consolidates current state of knowledge on freshwater plastisphere, focussing on its biodiversity, community assembly, and interactions with environmental factors. Current biomolecular approaches revealed a variety of prokaryotic and eukaryotic taxa associated with plastic surfaces. Despite their ecological importance, the presence of potentially pathogenic bacteria and mobile genetic elements (i.e., antibiotic resistance genes) raises concerns for ecosystem and human health. However, the extent of these risks and their implications remain unclear. Advanced sequencing technologies are promising for elucidating the functions of plastisphere, particularly in plastic biodegradation processes. Overall, this review emphasizes the need for comprehensive studies to understand plastisphere dynamics in freshwater and to support effective management strategies to mitigate the impact of plastic pollution on freshwater resources.

Functional Redundant Microbiome Enhanced Anaerobic Digestion Efficiency under Ammonium Inhibition Conditions

Revealing the role of functional redundancy is of great importance considering its key role in maintaining the stability of microbial ecosystems in response to various disturbances. However, experimental evidence on this point is still lacking due to the difficulty in "manipulating" and depicting the degree of redundancy. In this study, manipulative experiments of functional redundancy were conducted by adopting the mixed inoculation strategy to evaluate its role in engineered anaerobic digestion systems under ammonium inhibition conditions. The results indicated that the functional redundancy gradient was successfully constructed and confirmed by evidence from pathway levels. All mixed inoculation groups exhibited higher methane production regardless of the ammonium level, indicating that functional redundancy is crucial in maintaining the system's efficiency. Further analysis of the metagenome-assembled genomes within different functional guilds revealed that the extent of redundancy decreased along the direction of the anaerobic digestion flow, and the role of functional redundancy appeared to be related to the stress level. The study also found that microbial diversity of key functional populations might play a more important role than their abundance on the system's performance under stress. The findings provide direct evidence and highlight the critical role of functional redundancy in enhancing the efficiency and stability of anaerobic digestion.

Life Cycle of Functional All-Green Biocompatible Fibrous Materials Based on Biodegradable Polyhydroxybutyrate and Hemin: Synthesis, Service Life, and the End-of-Life via Biodegradation

This article addresses the entire life cycle of the all-green fibrous materials based on poly(3-hydroxybutyrate) (PHB) containing a natural biocompatible additive Hemin (Hmi): from preparation, service life, and the end of life upon in-soil biodegradation. Fibrous PHB/Hmi materials with a highly developed surface and interconnected porosity were prepared by electrospinning (ES) from Hmi-containing feed solutions. Structural organization of the PHB/Hmi materials (porosity, uniform structure, diameter of fibers, surface area, distribution of Hmi within the PHB matrix, phase composition, etc.) is shown to be governed by the ES conditions: the presence of even minor amounts of Hmi in the PHB/Hmi (below 5 wt %) serves as a powerful tool for the control over their structure, performance, and biodegradation. Service characteristics of the PHB/Hmi materials (wettability, prolonged release of Hmi, antibacterial activity, breathability, and mechanical properties) were studied by different physicochemical methods (scanning electron microscopy, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, differential scanning calorimetry, contact angle measurements, antibacterial tests, etc.). The effect of the structural organization of the PHB/Hmi materials on their in-soil biodegradation at the end of life was analyzed, and key factors providing efficient biodegradation of the PHB/Hmi materials at all stages (from adaptation to mineralization) are highlighted (high surface area and porosity, thin fibers, release of Hmi, etc.). The proposed approach allows for target-oriented preparation and structural design of the functional PHB/Hmi nonwovens when their structural supramolecular organization with a highly developed surface area controls both their service properties as efficient antibacterial materials and in-soil biodegradation upon the end of life.

Marine biodegradation of plastic films by Alcanivorax under various ambient temperatures: Bacterial enrichment, morphology alteration, and release of degradation products

The global ocean has been receiving massive amounts of plastic wastes. Marine biodegradation, influenced by global climate, naturally breaks down these wastes. In this study, we systematically compared the biodegradation performance of petroleum- and bio-based plastic films, i.e., low-density polyethylene (LDPE), polylactic acid (PLA), and polyhydroxyalkanoates (PHAs) under three ambient temperatures (4, 15, and 22 °C). We deployed the our previously isolated cold-tolerant plastic-degrading Alcanivorax to simulate the accelerated marine biodegradation process and evaluated the alteration of bacterial growth, plastic films, and released degradation products. Notably, we found that marine biodegradation of PHA films enriched more bacterial amounts, induced more conspicuous morphological damage, and released more microplastics (MPs) and dissolved organic carbon (DOC) under all temperatures compared to LDPE and PLA. Particularly, MPs were released from film edges and cracks with a mean size of 2.8 μm under all temperatures. In addition, the degradation products released by biodegradation of PHA under 22 °C induced the highest acute toxicity to Vibrio fischeri. Our results highlighted that: (1) marine biodegradation of plastics would release millions of MPs per cm2 exposed surface area even in cold environments within 60 days; (2) different marine biodegradation scenarios of these plastics may raise disparate impacts and mitigation-related studies.

Deterioration of single-use biodegradable plastics in high-humidity air and freshwaters over one year: Significant disparities in surface physicochemical characteristics and degradation rates

More single-use plastics are accumulating in the environment, and likewise biodegradable plastics (BPs), which are being vigorously promoted, cannot escape the fate. Currently, studies on the actual degradation of BPs in open-air and freshwaters are underrepresented despite they are potentially headmost leakage and contamination sites for disposable BPs. Herein, we compared the degradation behavior of six BP materials and non-degradable polypropylene (PP) plastics over a 1-year in situ suspension in the high-humidity air, a eutrophic river, and an oligotrophic lake. Moreover, a 3-months laboratory incubation was performed to detect the release of dissolved organic carbon (DOC) from BPs. In both air and freshwaters, poly(p-dioxanone) (PPDO) degraded significantly while PP and polylactic acid (PLA) showed no signs of degradation. The average degradation rates of three poly(butylene adipate-co-terephthalate) (PBAT)-based films varied: 100% in river, 55% in lake, and 10% in air. In addition to PLA, surface chemical groups, hydrophilicity, and thermal stability of BPs changed, and microplastics were found on their surfaces. Correspondingly, BPs with faster degradation rates released relatively higher amounts of DOC. Environmental microbial and chemical characteristics may contribute to differences in BP degradation besides polymer specificity. Altogether, our results indicate the need for appropriate monitoring of BPs.

Lacustrine plastisphere: Distinct succession and assembly processes of prokaryotic and eukaryotic communities and role of site, time, and polymer types

Microplastics as a carrier can promote microbial diffusion, potentially influencing the ecological functions of microbial communities in aquatic environments. However, our understanding of the assembly mechanism of microbial communities on different microplastic polymers in freshwater lakes during succession is still insufficient, especially for the eukaryotes. Here, the colonization time, site, and polymer types of microplastics were comprehensively considered to investigate the composition and assembly of prokaryotic and eukaryotic communities and their driving factors during the lacustrine plastisphere formation. Results showed that the particle-associated microorganisms in water were the main source of the plastisphere prokaryotes, while the free-living microorganisms in water mainly accounted for the plastisphere eukaryotes. The response of prokaryotic communities to different microplastic polymers was stronger than eukaryotic communities. The assembly of plastisphere prokaryotic communities was dominated by homogenizing processes (mainly homogenous selection), while the assembly of eukaryotic communities was dominated by differentiating processes (mainly dispersal limitation). Colonization time was an important factor affecting the composition of prokaryotic and eukaryotic communities during the formation of the plastisphere. The Chao1 richness of prokaryotic communities in the plastisphere increased with the increase of colonization time, whereas the opposite was true in eukaryotic communities. This differential response of species diversity and composition of prokaryotic and eukaryotic communities in the plastisphere during dynamic succession could lead to their distinct assembly processes. Overall, the results suggest that distinct assembly of microbial communities in the plastisphere may depend more on specific microbial sub-communities and colonization time than polymer types and colonization site.

Distinct microbial communities degrade cellulose diacetate bioplastics in the coastal ocean

IMPORTANCE

Cellulose diacetate (CDA) is a promising alternative to conventional plastics due to its versatility in manufacturing and low environmental persistence. Previously, our group demonstrated that CDA is susceptible to biodegradation in the ocean on timescales of months. In this study, we report the composition of microorganisms driving CDA degradation in the coastal ocean. We found that the coastal ocean harbors distinct bacterial taxa implicated in CDA degradation and these taxa have not been previously identified in prior CDA degradation studies, indicating an unexplored diversity of CDA-degrading bacteria in the ocean. Moreover, the shape of the plastic article (e.g., a fabric, film, or foam) and plasticizer in the plastic matrix selected for different microbial communities. Our findings pave the way for future studies to identify the specific species and enzymes that drive CDA degradation in the marine environment, ultimately yielding a more predictive understanding of CDA biodegradation across space and time.

Microbial colonization patterns and biodegradation of petrochemical and biodegradable plastics in lake waters: insights from a field experiment

Introduction

Once dispersed in water, plastic materials become promptly colonized by biofilm-forming microorganisms, commonly known as plastisphere.

Methods

By combining DNA sequencing and Confocal Laser Scanning Microscopy (CLSM), we investigated the plastisphere colonization patterns following exposure to natural lake waters (up to 77 days) of either petrochemical or biodegradable plastic materials (low density polyethylene - LDPE, polyethylene terephthalate - PET, polylactic acid - PLA, and the starch-based MaterBi® - Mb) in comparison to planktonic community composition. Chemical composition, water wettability, and morphology of plastic surfaces were evaluated, through Transform Infrared Spectroscopy (ATR-FTIR), Scanning Electron Microscopy (SEM), and static contact angle analysis, to assess the possible effects of microbial colonization and biodegradation activity.

Results and Discussion

The phylogenetic composition of plastisphere and planktonic communities was notably different. Pioneering microbial colonisers, likely selected from lake waters, were found associated with all plastic materials, along with a core of more than 30 abundant bacterial families associated with all polymers. The different plastic materials, either derived from petrochemical hydrocarbons (i.e., LDPE and PET) or biodegradable (PLA and Mb), were used by opportunistic aquatic microorganisms as adhesion surfaces rather than carbon sources. The Mb-associated microorganisms (i.e. mostly members of the family Burkholderiaceae) were likely able to degrade the starch residues on the polymer surfaces, although the Mb matrix maintained its original chemical structure and morphology. Overall, our findings provide insights into the complex interactions between aquatic microorganisms and plastic materials found in lake waters, highlighting the importance of understanding the plastisphere dynamics to better manage the fate of plastic debris in the environment.

The perfluoroalkyl substances influenced the distribution of bacterial communities and their functions from source water to tap water

Perfluoroalkyl substances (PFASs) and antibiotic resistance genes (ARGs) in drinking water are environmental issues that require special attention. The objective of this study was to know the effects of PFASs on microbial communities and their functional genes from source water to tap water. PFASs were detected by mass-labeled internal standards method, and the microbial communities and functional genes were analyzed by metagenomics. Our results indicated that the concentration of total PFASs in the water ranged from 47.7 to 171.4 ng/L, with perfluorobutanoic acid (PFBA) and perfluorooctanoic acid (PFOA) being the dominant types. The PFASs concentration decreased slowly from source to tap water in some months. PFBA, PFOA, perfluorooctane sulfonic acid (PFOS) and perfluorohexanoic acid (PFHxA) influenced the functional genes related to two-component system, bacterial secretion system and flagellar assembly of Aquabacterium, Methylobacterium, and Curvibacter, which contributed significantly to macB and evgS. Therefore, the bacterial communities enhanced adaptation to fluctuating environments by upregulating some functional genes under the PFASs stress, with concomitant changes in the expression of ARGs. Moreover, PFASs also promoted the expression of functional genes associated with human diseases, such as shigellosis and tuberculosis, which increased the risk of human pathogenicity. The bench scale experiment results also suggested that PFOA and PFOS in drinking water can promote the ARGs proliferation and induce microbial risk. Therefore, it is necessary to take measures to prevent the risks caused by PFASs and ARGs in drinking water.

Degradation of starch-based bioplastic bags in the pelagic and benthic zones of the Gulf of Oman

The Gulf of Oman is becoming increasingly polluted with plastics, hence bioplastics have been considered 'a substitute', although their biodegradability in marine environments has not been well investigated. Most research has been performed on cellulose-based bioplastics, whereas starch-based bioplastics have proven to be a suitable, but less researched, alternative. This study is the first of its kind designed to investigate the degradability of two different types of starch-based bioplastic bags, available in the market and labeled as "biodegradable", in the pelagic and benthic zones of one of the warmest marine environment in the world. Fourier-Transform Infrared Spectroscopy (FTIR) showed a clear reduction in the presence of OH, CH, and CO in the bioplastic bags after 5 weeks of immersion. Thermo-Gravimetric Analysis (TGA) indicated degradation of glycerol, starch, and polyethylene. The biofouling bacterial communities on bioplastic surfaces showed distinct grouping based on the immersion zone. Candidaatus saccharibacteria, Verrucomicrobiae, Acidimicrobiia and Planctomycetia sequences were only detectable on bioplastics in the pelagic zone, whereas Actinomyces, Pseudomonas, Sphingobium and Acinetobacter related sequences were only found on bioplastics in the benthic layer. We conclude that starch-based bioplastics are more readily degradable in the Gulf of Oman than conventional plastics, hence could serve as a better environmentally friendly alternative.

The distinct plastisphere microbiome in the terrestrial-marine ecotone is a reservoir for putative degraders of petroleum-based polymers

Research into plastic-degrading bacteria and fungi is important for understanding how microorganisms can be used to address the problem of plastic pollution and for developing new approaches to sustainable waste management and bioplastic production. In the present study, we isolated 55 bacterial and 184 fungal strains degrading polycaprolactone (PCL) in plastic waste samples from Dafeng coastal salt marshes, Jiangsu, China. Of these, Jonesia and Streptomyces bacteria also showed potential to degrade other types of petroleum-based polymers. The metabarcoding results proved the existence of plastisphere as a distinct ecological niche regardless of the plastic types where 27 bacterial and 29 fungal amplicon sequence variants (ASVs) were found to be significantly (p < 0.05) enriched, including some belonging to Alternaria (Ascomycota, Fungi) and Pseudomonas (Gammaproteobacteria, Bacteria) that were also mined out by the method of cultivation. Further assembly analyses demonstrated the importance of deterministic processes especially the environmental filtering effect of carbon content and pH on bacteria as well as the carbon and cation content on fungi in shaping the plastisphere communities in this ecosystem. Thus, the unique microbiome of the plastisphere in the terrestrial-marine ecotone is enriched with microorganisms that are potentially capable of utilizing petroleum-based polymers, making it a valuable resource for screening plastic biodegraders.

Plastic-microbe interaction in the marine environment: Research methods and opportunities

Approximately 9 million metric tons of plastics enters the ocean annually, and once in the marine environment, plastic surfaces can be quickly colonised by marine microorganisms, forming a biofilm. Studies on plastic debris-biofilm associations, known as plastisphere, have increased exponentially within the last few years. In this review, we first briefly summarise methods and techniques used in exploring plastic-microbe interactions. Then we highlight research gaps and provide future research opportunities for marine plastisphere studies, especially, on plastic characterisation and standardised biodegradation tests, the fate of "environmentally friendly" plastics, and plastisphere of coastal habitats. Located in the tropics, Southeast Asian (SEA) countries are significant contributors to marine plastic debris. However, plastisphere studies in this region are lacking and therefore, we discuss how the unique environmental conditions in the SEA seas may affect plastic-microbe interaction and why there is an imperative need to conduct plastisphere studies in SEA marine environments. Finally, we also highlight the lack of understanding of the pathogenicity and ecotoxicological effects of plastisphere on marine ecosystems.