Understanding the Adsorption of PFOA on MIL-101(Cr)-Based Anionic-Exchange Metal-Organic Frameworks: Comparing DFT Calculations with Aqueous Sorption Experiments

Zirconium-Based Metal-Organic Frameworks with Free Hydroxy Groups for Enhanced Perfluorooctanoic Acid Uptake in Water

Perfluorooctanoic acid (PFOA) is a highly recalcitrant organic pollutant, and its bioaccumulation severely endangers human health. While various methods are developed for PFOA removal, the targeted design of adsorbents with high efficiency and reusability remains largely unexplored. Here the rational design and synthesis of two novel zirconium-based metal‒organic frameworks (MOFs) bearing free ortho-hydroxy sites, namely noninterpenetrated PCN-1001 and twofold interpenetrated PCN-1002, are presented. Single crystal analysis of the pure ligand reveals that intramolecular hydrogen bonding plays a pivotal role in directing the formation of MOFs with free hydroxy groups. Furthermore, the transformation from PCN-1001 to PCN-1002 is realized. Compared to PCN-1001, PCN-1002 displays higher chemical stability due to interpenetration, thereby demonstrating an exceptional PFOA adsorption capacity of up to 632 mg g-1 (1.53 mmol g-1), which is comparable to the reported record values. Moreover, PCN-1002 shows rapid kinetics, high selectivity, and long-life cycles in PFOA removal tests. Solid-state nuclear magnetic resonance results and density functional theory calculations reveal that multiple hydrogen bonds between the free ortho-hydroxy sites and PFOA, along with Lewis acid-base interaction, work collaboratively to enhance PFOA adsorption.

Roles of varying carbon chains and functional groups of legacy and emerging per-/polyfluoroalkyl substances in adsorption on metal-organic framework: Insights into mechanism and adsorption prediction

Metal-organic frameworks (MOFs) are promising adsorbents for legacy per-/polyfluoroalkyl substances (PFASs), but they are being replaced by emerging PFASs. The effects of varying carbon chains and functional groups of emerging PFASs on their adsorption behavior on MOFs require attention. This study systematically revealed the structure-adsorption relationships and interaction mechanisms of legacy and emerging PFASs on a typical MOF MIL-101(Cr). It also presented an approach reflecting the average electronegativity of PFAS moieties for adsorption prediction. We demonstrated that short-chain or sulfonate PFASs showed higher adsorption capacities (μmol/g) on MIL-101(Cr) than their long-chain or carboxylate counterparts, respectively. Compared with linear PFASs, their branched isomers were found to exhibit a higher adsorption potential on MIL-101(Cr). In addition, the introduction of ether bond into PFAS molecule (e.g., hexafluoropropylene oxide dimeric acid, GenX) increased the adsorption capacity, while the replacement of CF2 moieties in PFAS molecule with CH2 moieties (e.g., 6:2 fluorotelomer sulfonate, 6:2 FTS) caused a decrease in adsorption. Divalent ions (such as Ca2+ and SO42-) and solution pH have a greater effect on the adsorption of PFASs containing ether bonds or more CF2 moieties. PFAS adsorption on MIL-101(Cr) was governed by electrostatic interaction, complexation, hydrogen bonding, π-CF interaction, and π-anion interaction as well as steric effects, which were associated with the molecular electronegativity and chain length of each PFAS. The average electronegativity of individual moieties (named Me) for each PFAS was estimated and found to show a significantly positive correlation with the corresponding adsorption capacity on MIL-101(Cr). The removal rates of major PFASs in contaminated groundwater by MIL-101(Cr) were also correlated with the corresponding Me values. These findings will assist with the adsorption prediction for a wide range of PFASs and contribute to tailoring efficient MOF materials.

Regeneration of exhausted adsorbents after PFAS adsorption: A critical review

The adsorption process efficiently removes per- and polyfluoroalkyl substances (PFAS) from water, but managing exhausted adsorbents presents notable environmental and economic challenges. Conventional disposal methods, such as incineration, may reintroduce PFAS into the environment. Therefore, advanced regeneration techniques are imperative to prevent leaching during disposal and enhance sustainability and cost-effectiveness. This review critically evaluates thermal and chemical regeneration approaches for PFAS-laden adsorbents, elucidating their operational mechanisms, the influence of water quality parameters, and their inherent advantages and limitations. Thermal regeneration achieves notable desorption efficiencies, reaching up to 99% for activated carbon. However, it requires significant energy input and risks compromising the adsorbent's structural integrity, resulting in considerable mass loss (10-20%). In contrast, chemical regeneration presents a diverse efficiency landscape across different regenerants, including water, acidic/basic, salt, solvent, and multi-component solutions. Multi-component solutions demonstrate superior efficiency (>90%) compared to solvent-based solutions (12.50%), which, in turn, outperform salt (2.34%), acidic/basic (1.17%), and water (0.40%) regenerants. This hierarchical effectiveness underscores the nuanced nature of chemical regeneration, significantly influenced by factors such as regenerant composition, the molecular structure of PFAS, and the presence of organic co-contaminants. Exploring the conditional efficacy of thermal and chemical regeneration methods underscores the imperative of strategic selection based on specific types of PFAS and material properties. By emphasizing the limitations and potential of particular regeneration schemes and advocating for future research directions, such as exploring persulfate activation treatments, this review aims to catalyze the development of more effective regeneration processes. The ultimate goal is to ensure water quality and public health protection through environmentally sound solutions for PFAS remediation efforts.

Simultaneous size and defect control of metal-organic framework by deep eutectic solvent for efficient perfluoroalkyl substances adsorption: Delving into mechanism

This study reports an environment-friendly protocol to prepare a metal-organic framework (MOF) with simultaneously controlled particle size and open metal site for adsorption removal of perfluoroalkyl substances (PFASs). The successful preparation of UiO-66 with defect and crystal size modulation was achieved using a green and straightforward method, adjusting the components and molar ratios of ammonium salt/glycolic acid deep eutectic solvents (DESs). The corresponding modulation mechanism primarily relied on the combined regulation of the deprotonation and competitive coordination abilities of the eutectic solvent components. The adsorption process was thoroughly examined using spectral analyses, adsorption behavior profiling, and ab initio molecular dynamics simulations. The results revealed that PFAS adsorption is driven by combined capturing effects, such as CF-π, acid/base coordination, C-F⋯Zr, hydrogen bonding, and hydrophobic interactions. Our findings were not thus that the smaller the crystal size of MOF and the higher the defect concentration in the material, the better the PFAS adsorption performance. The result demonstrated the combined effect of these adsorbent features on PFAS mixtures. Furthermore, they revealed unique differences in sorption properties between these targets with different carbon chain lengths. Extensive defects in DES-based UiO-66 led to larger pores, increasing the availability of many adsorption sites and aiding in PFAS adsorption and diffusion. Nevertheless, the surplus of larger pores in the substance increased the competitive adsorption, reducing the total quantity of PFASs absorbed. Furthermore, various interactions and a less restrictive configuration increased the contact of functional groups with adsorbates, substantially enhancing the adsorption. This study investigates the basic questions about how PFAS molecules are adsorbed on DES-based MOFs and the relationship among the structure, properties, and performance to improve the efficiency of this novel adsorbent.

Insights into PFAS environmental fate through computational chemistry: A review

Per- and polyfluoroalkyl substances (PFAS) are widely used chemicals that exhibit exceptional chemical and thermal stability. However, their resistance to degradation has led to their widespread environmental contamination. PFAS also negatively affect the environment and other organisms, highlighting the need for effective remediation methods to mitigate their presence and prevent further contamination. Computational chemistry methods, such as Density Functional Theory (DFT) and Molecular Dynamics (MD) offer valuable tools for studying PFAS and simulating their interactions with other molecules. This review explores how computational chemistry methods contribute to understanding and tackling PFAS in the environment. PFAS have been extensively studied using DFT and MD, each method offering unique advantages and computational limitations. MD simulates large macromolecules systems however it lacks the ability model chemical reactions, while DFT provides molecular insights however at a high computational cost. The integration of DFT with MD shows promise in predicting PFAS behavior in different environments. This work summarizes reported studies on PFAS compounds, focusing on adsorption, destruction, and bioaccumulation, highlighting contributions of computational methods while discussing the need for continued research. The findings emphasize the importance of computational chemistry in addressing PFAS contamination, guiding risk assessments, and informing future research and innovations in this field.

Amino Group-Driven Adsorption of Sodium p-Perfluorous Nonenoxybenzene Sulfonate in Water by the Modified Graphene Oxide

Sodium p-perfluorous nonenoxybenzene sulfonate (OBS) is one of the key alternatives to perfluoroalkyl substances (PFASs). Its widespread tendency has increased extensive contamination in the aquatic environment. However, the present treatment technology for OBS exhibited insignificant adsorption capacity and long adsorption time. In this study, three proportions (1:5, 3:5, and 10:1) of chitosan-modified amino-driven graphene oxide (CS-GO) were innovated to strengthen the OBS adsorption capacity, compared with graphene oxide (GO) and graphene (GH). Through the characterization of SEM, BET, and FTIR, it was discovered that CS was synthetized on GO surfaces successfully with a low specific surface area. Subsequently, batch single influence factor studies on OBS removal from simulated wastewater were investigated. The optimum removal efficiency of OBS could be achieved up to 95.4% within 2 h when the adsorbent was selected as CS-GO (10:1), the dosage was 2 mg, and the pH was 3. The addition of inorganic ions could promote the adsorption efficiency of OBS. In addition, CS-GO presented the maximum adsorption energy due to additional functional groups of -NH3, and electrostatic interaction was the foremost motive for improving the adsorption efficiency of OBS. Moreover, OBS exhibited the fastest diffusion coefficient in the CS-GO-OBS solution, which is consistent with the fitting results of adsorption kinetics.

Adsorption of perfluoroalkyl substances on deep eutectic solvent-based amorphous metal-organic framework: Structure and mechanism

Perfluoroalkyl substances (PFASs) are a class of emerging organic pollutants characterized by high toxicity, environmental persistence, and widespread detection in water sources. The removal of PFASs from water is a matter of global concern, given their detrimental impact on both the environment and public health. Many commonly used PFAS adsorbents demonstrate limited adsorption capacities and/or slow adsorption kinetics. Therefore, there is an urgent need for the development of efficient adsorbents. For the first time, this work systematically investigated the performance of a deep eutectic solvent (DES)-based amorphous metal-organic framework (MOF) for the adsorption of PFASs with different carbon-chain lengths under the state of the mixture in aquatic environments. The adsorption mechanism was probed by a suite of adsorption kinetics studies, adsorption isotherm profiling, spectral characterization, and ab initio molecular dynamics (AIMD) simulations, revealing that PFAS adsorption is driven by synergistic capturing effects including acid/base coordination, CF-π (carbon-fluorine-π), hydrogen bonding, and hydrophobic interactions. Furthermore, the adsorption processes of short-chain and long-chain targets were found to involve different rate-controlling steps and interaction sites. Hydrophobic interactions facilitated the swift arrival of long-chain PFASs at the coordinatively interacting sites between carboxyl termini and Lewis acid Zr unsaturated sites, thanks to their lower reaction barriers. On the other hand, the adsorption of short-chain PFASs primarily relied on a Zr hydroxyl-based ligand exchange force, which would take place at Brønsted acid sites. The existence of massive structural disorder in amorphous UiO-66 led to the development of larger pores, thus improving the accessibility of abundant adsorption sites and facilitating adsorption and diffusion. The presence of multiple types of interactions and flexible structure in defect-rich amorphous UiO-66 significantly increased the exposure of functional groups to the adsorbates. Additionally, this material possessed outstanding regeneration efficiency and outperformed other MOF-based adsorbents with high affinity for targets. It enhances our understanding of the adsorption performances and mechanisms of amorphous materials toward PFASs, thereby paving the way for designing more efficient PFAS adsorbents.

Steam activation of porous concave polymer nanospheres for high-efficient chromium and cadmium removal

The issue of heavy metal contamination in water is a global concern, and the development of highly efficient adsorbent materials is crucial for the removal and detoxification of heavy metals. Polymer-based materials have emerged as a promising class of adsorbents due to their ability to capture heavy metal pollutants and reduce them to less toxic forms. The limited surface area of conventional polymer adsorbents makes them less effective for high-capacity adsorption. Herein, we present a low-temperature steam activation approach to address this challenge. This activation approach leads to a remarkable increase of over 20 times in the surface area of concave aminophenol-formaldehyde (APF) polymer nanospheres (from 45 to 961 m2/g) while preserving their reductive functional groups. The activated concave APF nanospheres were evaluated for their adsorption capabilities towards two typical heavy metal ions (i.e., Cr(VI) and Cd(II)) in aqueous solutions. The maximum adsorption capacities achieved were 1054 mg g-1 for Cr(VI) and 342 mg g-1 for Cd(II), which are among the highest performances reported in the literature and are much higher than the capacities of the non-activated APF nanospheres. Additionally, approximately 71.5 % of Cr(VI) was simultaneously reduced to Cr(III) through the benzenoid amine pathway during adsorption, highlighting the crucial role of the steam activation strategy in enhancing the capability of polymer adsorbents.

Fluorine-functionalized magnetic amino microporous organic network for enrichment of perfluoroalkyl substances

Perfluoroalkyl substances (PFAS) are persistent organic pollutants that pose significant risks to human health and the environment. Efficient and selective enrichment of these compounds was crucial for their accurate detection and quantification in complex matrices. Herein, we report a novel magnetic solid-phase extraction (MSPE) method using fluorine-functionalized magnetic amino-microporous organic network (Fe3O4@MONNH2@F7) adsorbent for the efficient enrichment of PFAS from aqueous samples. The core-shell Fe3O4@MONNH2@F7 nanosphere was synthesized, featuring magnetic Fe3O4 nanoparticles as the core and a porous amino-functionalized MONs coating as the shell, which was further modified by fluorination. The synthesized adsorbent material exhibited high specific surface area, hydrophobicity, and abundant fluorine groups, facilitating efficient and selective adsorption of PFAS via electrostatic attraction, hydrophobic-hydrophobic interactions, fluorine-fluorine interactions, π-CF interactions and hydrogen bonding. Furthermore, the MSPE method coupled with ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) allowed for the rapid, sensitive, and accurate determination of ultra-trace PFAS in real water samples, human serum, and human follicular fluid. Under optimal conditions, the established MSPE method demonstrated a linear range (2 to 2000 ng L-1), with a correlation coefficient exceeding 0.9977, low limits of detection ranging from 0.54 to 1.47 ng L-1, with a relative standard deviation (RSD) < 9.1%. Additionally, the method showed excellent performance in complex real samples (recovery ratio of 81.7 to 121.6 %). The adsorption mechanism was investigated through kinetic, isotherm, and molecular simulation studies, revealing that the introduction of fluorine groups enhanced the hydrophobic interaction and fluorine-fluorine attraction between the adsorbent and PFAS. This work provides a proof-of-concept strategy for designing adsorbent materials with high efficiency and selectivity by post-modification, which has great potential for the detection and analysis of PFAS in complex samples.

Exceptionally High Perfluorooctanoic Acid Uptake in Water by a Zirconium-Based Metal-Organic Framework through Synergistic Chemical and Physical Adsorption

Perfluorooctanoic acid (PFOA) is an environmental contaminant ubiquitous in water resources, which as a xenobiotic and carcinogenic agent, severely endangers human health. The development of techniques for its efficient removal is therefore highly sought after. Herein, we demonstrate an unprecedented zirconium-based MOF (PCN-999) possessing Zr6 and biformate-bridged (Zr6)2 clusters simultaneously, which exhibits an exceptional PFOA uptake of 1089 mg/g (2.63 mmol/g), representing a ca. 50% increase over the previous record for MOFs. Single-crystal X-ray diffraction studies and computational analysis revealed that the (Zr6)2 clusters offer additional open coordination sites for hosting PFOA. The coordinated PFOAs further enhance the interaction between coordinated and free PFOAs for physical adsorption, boosting the adsorption capacity to an unparalleled high standard. Our findings represent a major step forward in the fundamental understanding of the MOF-based PFOA removal mechanism, paving the way toward the rational design of next-generation adsorbents for per- and polyfluoroalkyl substance (PFAS) removal.

Cutting-edge technologies and relevant reaction mechanism difference in treatment of long- and short-chain per- and polyfluoroalkyl substances: A review

Per- and polyfluoroalkyl substances (PFAS) are emerging contaminants. Compared with short-chain PFAS, long-chain PFAS are more hazardous. Currently, little attention has been paid to the differences in reaction mechanisms between long-chain and short-chain PFAS. This pressing concern has prompted studies about eliminating PFAS and revealing the mechanism difference. The reaction rate and reaction mechanism of each technology was focused on, including (1) adsorption, (2) ion exchange (IX), (3) membrane filtration, (4) advanced oxidation, (5) biotransformation, (6) novel functional material, and (7) other technologies (e.g. ecological remediation, hydrothermal treatment (HT), mechanochemical (MC) technology, micro/nanobubbles enhanced technology, and integrated technologies). The greatest reaction rate k of photocatalysis for long- and short-chain PFAS high up to 63.0 h-1 and 19.7 h-1, respectively. However, adsorption, membrane filtration, and novel functional material remediation were found less suitable or need higher operation demand for treating short-chain PFAS. Ecological remediation is more suitable for treating natural waterbody for its environmentally friendly and fair reaction rate. The other technologies all showed good application potential for both short- and long-chain PFAS, and it was more excellent for long-chain PFAS. The long-chain PFAS can be cleavaged into short-chain PFAS by C-chain broken, -CF2 elimination, nucleophilic substitution of F-, and HF elimination. Furthermore, the application of each type of technology was novelly designed; and suggestions for the future development of PFAS remediation technologies were proposed.

Advancing PFAS Sorbent Design: Mechanisms, Challenges, and Perspectives

Per- and polyfluoroalkyl substances (PFAS) are a group of synthetic chemicals characterized with persistence and multisurface resistance. Their accumulation in the environment and toxicity to human beings have contributed to the rapid development of regulations worldwide since 2002. The sorption strategy, taking advantage of intermolecular interactions for PFAS capture, provides a promising and efficient solution to the treatment of PFAS contaminated sources. Hydrophobic and electrostatic interactions are the two commonly found in commercially available PFAS sorbents, with the fluorous interaction being the novel mechanism applied for sorbent selectivity. The main object of this Perspective is to provide a critical review on the current design criteria of PFAS sorbents, with particular focus on their sorption and interaction mechanisms as well as limitations. An outlook on future innovative design for efficient PFAS sorbents is also provided.

Progress in the application of ionic liquids and deep eutectic solvents for the separation and quantification of per- and polyfluoroalkyl substances

Per- and polyfluoroalkyl substances (PFASs), often labeled as "forever chemicals," earned this moniker due to their widespread presence in the environment, bioaccumulative tendencies, and resistance to remediation efforts. Employed for decades in various applications, spanning from stain-resistant fabrics to grease-proof food containers and fire-fighting foams, PFASs have evolved into an anthropogenic nightmare. Their adverse impact on human health, including immune dysfunction, infertility, and a spectrum of cancers, is alarming. Conventional water treatment methods, notably in the case of short-chain congeners, struggle to effectively eliminate PFASs, underscoring the pressing need for enhanced adsorbents. In recent years, there has been a prominent surge in the exploration of innovative techniques centered around ionic liquids (ILs) and deep eutectic solvents (DESs) for the removal of PFASs from various sources, including food samples like cooking oil, as well as environmental waters. In this Review, we delve into key advancements and discoveries related to the utilization of ILs and DESs as media for the liquid-liquid extraction of PFASs, as well as their applications as sorbents on solid-state or nanoscale supports. Our exploration encompasses groundbreaking approaches, including the utilization of dicationic ILs for ultra-sensitive mass spectrometric PFAS detection, alongside the innovative application of fluorinated ILs and hydrophobic DESs, enabling highly efficient PFAS sequestration. The landscape of existing PFAS extraction methods is riddled with formidable challenges, including limited selectivity, matrix interferences, subpar extraction efficiency, exorbitant costs, laborious procedures, ecological consequences, and a lack of standardization. Given these challenges, our review unequivocally asserts the pivotal role ILs and DESs will play in shaping the next generation of PFAS remediation strategies. Rigorous characterization of water solubility, toxicity, and biodegradation, along with improved recyclability and thorough techno-economic analyses, are essential for further progress. Future focus must also extend to addressing short-chain PFASs (such as PFBS) and PFAS alternatives (including ADONA, GenX, F-53B), which often pose higher toxicity risks than the compounds they aim to replace. A forward-thinking approach will integrate cutting-edge data-driven techniques, such as machine learning, to enhance our understanding and response to PFAS-related issues. Finally, we advocate seamless integration of PFAS separation with advanced treatment, efficiently isolating and destroying these compounds for a lasting solution to contamination challenges.

Critical review on organophosphate esters in water environment: Occurrence, health hazards and removal technologies

Organophosphate esters (OPEs), which are phosphoric acid ester derivatives, are anthropogenic substances that are widely used in commerce. Nevertheless, there is growing public concern about these ubiquitous contaminants, which are frequently detected in contaminated water sources. OPEs are mostly emitted by industrial operations, and the primary routes of human exposure to OPEs include food intake and dermal absorption. Because of their negative effects on both human health and the environment, it is clear that innovative methods are needed to facilitate their eradication. In this study, we present a comprehensive overview of the existing characteristics and origins of OPEs, their possible impacts on human health, and the merits, drawbacks, and future possibilities of contemporary sophisticated remediation methods. Current advanced remediation approaches for OPEs include adsorption, degradation (advanced oxidation, advanced reduction, and redox technology), membrane filtration, and municipal wastewater treatment plants, degradation and adsorption are the most promising removal technologies. Meanwhile, we proposed potential areas for future research (appropriate management approaches, exploring the combination treatment process, economic factors, and potential for secondary pollution). Collectively, this work gives a comprehensive understanding of OPEs, providing useful insights for future research on OPEs pollution.

Metal-Organic Framework-Based Composites for the Adsorption Removal of Per- and Polyfluoroalkyl Substances from Water

The increasing health risks posed by per- and polyfluoroalkyl substances (PFASs) in the environment highlight the importance of implementing effective removal techniques. Conventional wastewater treatment processes are inadequate for removing persistent organic pollutants. Recent studies have increasingly demonstrated that metal-organic frameworks (MOFs) are capable of removing PFASs from water through adsorption techniques. However, there is still constructive discussion on the potential of MOFs in adsorbing and removing PFASs for large-scale engineering applications. This review systematically investigates the use of MOFs as adsorbents for the removal of PFAS in water treatment. This primarily involved a comprehensive analysis of existing literature to understand the adsorption mechanisms of MOFs and to identify factors that enhance their efficiency in removing PFASs. We also explore the critical aspects of regeneration and stability of MOFs, assessing their reusability and long-term performance, which are essential for large-scale water treatment applications. Finally, our study highlights the challenges of removing PFASs using MOFs. Especially, the efficient removal of short-chain PFASs with hydrophilicity is a major challenge, while medium- to long-chain PFASs are frequently susceptible to being captured from water by MOFs through multiple synergistic effects. The ion-exchange force may be the key to solving this difficulty, but its susceptibility to ion interference in water needs to be addressed in practical applications. We hope that this review can provide valuable insights into the effective removal and adsorption mechanisms of PFASs as well as advance the sustainable utilization of MOFs in the field of water treatment, thereby presenting a novel perspective.

Surface modifications of biopolymers for removal of per- and polyfluoroalkyl substances from water: Current research and perspectives

Per- and polyfluoroalkyl substances (PFAS) are highly recalcitrant organic contaminants that have attracted ever-increasing attention from the general public, government agencies and scientific communities. To remove PFAS from water, especially the enormous volume of drinking water, stormwater, and groundwater, sorption is the most practical approach. Success of this approach demands green, renewable, and sustainable materials for capturing PFAS at ng/L or µg/L levels. To meet this demand, this manuscript critically reviewed sorbents developed from biopolymers, such as chitosan (CTN), alginate (ALG), and cellulose (CEL) covering the period from 2008 to 2023. The use of different cross-linkers for the surface modifications of biopolymers were described. The underlying removal mechanism of biosorbents for PFAS adsorption from molecular perspectives was discussed. Besides reviewing and comparing the performance of different bio-based sorbents with respect to environmental factors like pH, and sorption kinetics and capacity, strategies for modifying biosorbents for better performance were proposed. Additionally, approaches for regeneration and reuse of the biosorbents were discussed. This was followed by further discussion of challenges facing the development of biosorbents for PFAS removal.

Strategies to improve adsorption and photocatalytic performance of metal-organic frameworks (MOFs) for perfluoroalkyl and polyfluoroalkyl substances (PFASs) removal from water: A review

Perfluoroalkyl and polyfluoroalkyl substances (PFASs) represent a category of persistent and hazardous organic pollutants extensively prevalent across aquatic environments. The combination of adsorption and photocatalytic degradation has been identified as an effective approach for removing trace amounts of PFASs from water. Among the various materials explored for this purpose, metal-organic frameworks (MOFs) have structural solid tunability, and suitable modification methods could endow them with rich adsorption capabilities and excellent photocatalytic performance, which has potential for applications involving the treatment of trace, multi-chain-length PFASs in water. The research within this realm is currently in its nascent phase, and a holistic knowledge of modification methods can provide a comprehensive framework for future studies. Therefore, this review intends to (1) summarize the mechanism underlying the adsorption and photocatalytic removal of PFASs by MOFs; (2) present various modification methods aimed at enhancing the adsorption and photocatalytic performance of MOFs in alignment with the goal mentioned above; (3) provide an outlook on the prospects of utilizing MOFs for PFASs removal based on current trends and data. Ultimately, the findings from these studies will contribute to advancing knowledge in this area and facilitate the development of effective strategies for addressing PFASs contamination in water systems.

Toward a mechanistic understanding of Rhenium(VII) adsorption behavior onto aminated polymeric adsorbents: Batch experiments, spectroscopic analyses, and theoretical computations

Rhenium, a rare and critical metal, existing in the industrial wastewater has been aroused extensive interests recently, due to its environmental and resource issues. Chitosan, an easily available, low-cost and eco-friendly biopolymer, was prepared and modified by grafting primary, secondary, tertiary and quaternary amino groups, respectively. Adsorption behaviors and interactions between ReO4- and these four types of aminated adsorbents were investigated through batch experiments, spectroscopic analysis, and theoretical computations. Chitosan modified with secondary amines showed an extremely high uptake of ReO4- with 742.0 mg g-1, which was higher than any reported adsorbents so far. Furthermore, a relatively high adsorption selectivity for Re(VII), as well as the stable and facile regeneration of these aminated adsorbents revealed a promising approach for Re(VII) recovery in full-scale applications. The electrostatic attraction was illustrated to be the main adsorption mechanism by Fourier Transform Infrared Spectroscopy and X-ray Photoelectron Spectroscopy analyses. Significantly, the sub-steps of the adsorption process, encompassing the transformation of binding sites and the subsequent binding between these sites and the adsorbate, have been thoroughly investigated through the density functional theory (DFT) calculation method. This approach was firstly proposed to clearly demonstrate the differences in Re(VII) adsorption behavior onto four types of aminated adsorbents, resulting the importance of not only strong binding energy but also an appropriate binding spatial environmental for effective Re(VII) adsorption.

Unique fluorophilic pores engineering within porous aromatic frameworks for trace perfluorooctanoic acid removal

Perfluorooctanoic acid (PFOA), a representative of per/polyfluorinated alkyl substances, has become a persistent water pollutant of widespread concern due to its biological toxicity and refractory property. In this work, we design and synthesize two porous aromatic frameworks (PAF) of PAF-CF3 and PAF-C2F5 using fluorine-containing alkyl based monomers in tetrahedral geometry. Both PAFs exhibit nanosized pores (∼1.0 nm) of high surface areas (over 800 m2 g-1) and good fluorophilicity. Remarkable adsorption capacity (˃740 mg g-1) and superior efficiency (˃24 g mg-1 h-1) are achieved toward the removal of PFOA with 1 μg L-1 concentration owing to unique C-F···F-C interactions. In particular, PAF-CF3 and PAF-C2F5 are able to reduce the PFOA concentration in water to 37.9 ng L-1 and 43.3 ng L-1, below EPA regulations (70 ng L-1). The reusability and high efficiency give both PAFs a great potential for sewage treatment.

A ReaxFF-based molecular dynamics study of the destruction of PFAS due to ultrasound

This work uses a computational approach to provide a mechanistic explanation for the experimentally observed destruction of per- and polyfluoroalkyl substances (PFAS) in water due to ultrasound. The PFAS compounds have caused a strong public and regulatory response due to their ubiquitous presence in the environment and toxicity to humans. In this research, ReaxFF -based Molecular Dynamics simulation under several temperatures ranging from 373 K to 5,000 K and different environments such as water vapor, O2, N2, and air were performed to understand the mechanism of PFAS destruction. The simulation results showed greater than 98% PFAS degradation was observed within 8 ns under a temperature of 5,000 K in a water vapor phase, replicating the observed micro/nano bubbles implosion and PFAS destruction during the application of ultrasound. Additionally, the manuscript discusses the reaction pathways and how PFAS degradation evolves providing a mechanistic basis for the destruction of PFAS in water due to ultrasound. The simulation showed that small chain molecules C1 and C2 fluoro-radical products are the most dominant species over the simulated period and are the impediment to an efficient degradation of PFAS. Furthermore, this research confirms the empirical findings observations that the mineralization of PFAS molecules occurs without the generation of byproducts. These findings highlight the potential of virtual experiments in complementing laboratory experiments and theoretical projections to enhance the understanding of PFAS mineralization during the application of ultrasound.

Functional MOF-Based Materials for Environmental and Biomedical Applications: A Critical Review

Over the last ten years, there has been a growing interest in metal-organic frameworks (MOFs), which are a unique category of porous materials that combine organic and inorganic components. MOFs have garnered significant attention due to their highly favorable characteristics, such as environmentally friendly nature, enhanced surface area and pore volume, hierarchical arrangements, and adjustable properties, as well as their versatile applications in fields such as chemical engineering, materials science, and the environmental and biomedical sectors. This article centers on examining the advancements in using MOFs for environmental remediation purposes. Additionally, it discusses the latest developments in employing MOFs as potential tools for disease diagnosis and drug delivery across various ailments, including cancer, diabetes, neurological disorders, and ocular diseases. Firstly, a concise overview of MOF evolution and the synthetic techniques employed for creating MOFs are provided, presenting their advantages and limitations. Subsequently, the challenges, potential avenues, and perspectives for future advancements in the utilization of MOFs in the respective application domains are addressed. Lastly, a comprehensive comparison of the materials presently employed in these applications is conducted.

Stability performance analysis of Fe based MOFs for peroxydisulfates activation to effectively degrade ciprofloxacin

Fe-based metal-organic frameworks (MOFs) show high activity toward the activation of peroxodisulfate (PDS) for the removal of organic micropollutants (OMPs) in wastewater treatment. However, there is a phenomenon of Fe ion dissolution in the Fe-based MOFs' active PDS system, and the reasons and influencing factors that cause Fe ion dissolution are poorly understood. In this study, we synthesized four types of Fe-based MOFs and confirmed their crystal structure through characterization. All types of Fe-based MOFs were found to activate PDS and form sulfate radicals (SO4 -), which effectively remove OMPs in wastewater. During the process of Fe-based MOFs activating PDS for CIP removal, activated species, oxidant reagent, and pH negatively impact the stability performance of the MOFs' structure. The coordination bond between Fe atom and O atom can be attacked by water molecules, free radicals, and H+, causing damage to the crystal structure of MOFs. Additionally, Fe (II)-MOFs exhibit the best stability performance, due to the enhanced bond energy of the coordination bond in MOFs by the F ligands. This study summarizes the influencing factors of Fe-based MOFs' damage during PDS activation processes, providing new insights for the future development of Fe-based MOFs.

Multifunctionalized Covalent Organic Frameworks for Broad-Spectrum Extraction and Ultrasensitive Analysis of Per- and Polyfluoroalkyl Substances

The contamination of surface and ground water by per- and polyfluoroalkyl substances (PFASs) has become a growing concern, and the structural diversity of PFASs is the major challenge for their ubiquitous applications. Strategies for monitoring coexistent anionic, cationic, and zwitterionic PFASs even at trace levels in aquatic environments are urgently demanded for effective pollution control. Herein, novel amide group and perfluoroalkyl chain-functionalized covalent organic frameworks (COFs) named COF-NH-CO-F9 are successfully synthesized and used for highly efficient extraction of broad-spectrum PFASs, attributing to their unique structure and the multifunctional groups. Under the optimal conditions, a simple and high-sensitivity method is established to quantify 14 PFASs including anionic, cationic, and zwitterionic species by coupling solid-phase microextraction (SPME) with ultrahigh-performance liquid chromatography-triple quadrupole mass spectrometry (UHPLC-MS/MS) for the first time. The established method displays high enrichment factors (EFs) of 66-160, ultrahigh sensitivity with low limits of detection (LODs) of 0.0035-0.18 ng L^-1, a wide linearity of 0.1-2000 ng L^-1 with correlation coefficient (R²) ≥0.9925, and satisfactory precision with relative standard deviations (RSDs) ≤11.2%. The excellent performance is validated in real water samples with recoveries of 77.1-108% and RSDs ≤11.4%. This work highlights the potential of rational design of COFs with the desired structure and functionality for the broad-spectrum enrichment and ultrasensitive determination of PFASs in real applications.

Enhanced performance of ZIF-8 nanocrystals hybrid monolithic composites via an in-situ growth strategy for efficient capillary microextraction of perfluoroalkyl phosphonic acids

Enrichment of perfluoroalkyl phosphonic acids (PFPAs) is of great significance and challenging for environmental monitoring, due to their toxic and persistent nature, highly fluorinated character as well as low concentration. Herein, novel metal-organic frameworks (MOFs) hybrid monolithic composites were prepared via metal oxide-mediated in situ growth strategy and utilized for capillary microextraction (CME) of PFPAs. A porous pristine monolith was initially obtained by copolymerization of the zinc oxide nanoparticles (ZnO-NPs)-dispersed methacrylic acid (MAA) with ethylenedimethacrylate (EDMA) and dodecafluoroheptyl acrylate (DFA). Afterwards, nanoscale-facilitated transformation of ZnO nanocrystals into the zeolitic imidazolate framework-8 (ZIF-8) nanocrystals was successfully realized via the dissolution-precipitation of the embedded ZnO-NPs in the precursor monolith in the presence of 2-methylimidazole. Experimental and spectroscopic results (SEM, N₂ adsorption-desorption, FT-IR, XPS) revealed that the coating of ZIF-8 nanocrystals significantly increased the surface area of the obtained ZIF-8 hybrid monolith and endowed the material abundant surface-localized unsaturated zinc sites. The proposed adsorbent showed highly enhanced extraction performance for PFPAs in CME, which was mainly ascribed to the strong fluorine affinity, Lewis acid/base complexing, anion-exchange, and weakly π-CF interaction. The coupling of CME with LC-MS enables effective and sensitive analysis of ultra-trace PFPAs in environment water and human serum. The coupling method demonstrated low detection limits (2.16-4.12 ng L^-1) with satisfactory recoveries (82.0-108.0%) and precision (RSDs ≤6.2%). This work offered a versatile route to design and fabricate selective materials for emerging contaminant enrichment in complicated matrices.

A review of PFAS adsorption from aqueous solutions: Current approaches, engineering applications, challenges, and opportunities

Per- and polyfluoroalkyl substances (PFAS) have drawn great attention due to their wide distribution in water bodies and toxicity to human beings. Adsorption is considered as an efficient treatment technique for meeting the increasingly stringent environmental and health standards for PFAS. This paper systematically reviewed the current approaches of PFAS adsorption using different adsorbents from drinking water as well as synthetic and real wastewater. Adsorbents with large mesopores and high specific surface area adsorb PFAS faster, their adsorption capacities are higher, and the adsorption process are usually more effective under low pH conditions. PFAS adsorption mechanisms mainly include electrostatic attraction, hydrophobic interaction, anion exchange, and ligand exchange. Various adsorbents show promising performances but challenges such as requirements of organic solvents in regeneration, low adsorption selectivity, and complicated adsorbent preparations should be addressed before large scale implementation. Moreover, the aid of decision-making tools including response surface methodology (RSM), techno-economic assessment (TEA), life cycle assessment (LCA), and multi criteria decision analysis (MCDA) were discussed for engineering applications. The use of these tools is highly recommended prior to scale-up to determine if the specific adsorption process is economically feasible and sustainable. This critical review presented insights into the most fundamental aspects of PFAS adsorption that would be helpful to the development of effective adsorbents for the removal of PFAS in future studies and provide opportunities for large-scale engineering applications.

Removal of Low Trace ppb-Level Perfluorooctanesulfonic Acid (PFOS) with ZIF-8 Coatings Involving Adsorbent Degradation

For the first time, low trace-level removal of perfluorooctanesulfonic acid (PFOS), i.e., 20-500 μg/L (ppb), from aqueous solutions using zeolitic imidazolate framework-8 (ZIF-8)-coated copper sheet (ZIF-8@Cu) composite is reported here. In comparison with different commercial activated carbon (AC) and all-silica zeolites, the composite showed the highest removal rate of 98%, which remained consistent over a wide range of concentrations. Additionally, no adsorbent leaching from the composite was noticed, which eradicated pre-analysis steps such as filtration and centrifugation, unless needed for other adsorbents studied here. The composite displayed fast uptake with saturation reaching within 4 h, irrespective of the initial concentration. However, the morphological and structural characterization revealed surface degradation of ZIF-8 crystals, along with a decline in the crystal size. The adsorption of PFOS on ZIF-8 crystals was linked to chemisorption, as the surface degradation surges with an increase in PFOS concentration or with cyclic exposure at low concentrations. Methanol seemingly removed surface debris (partially), thus providing access to ZIF-8 beneath the surface debris. Overall, the findings demonstrate that at low trace ppb-level PFOS concentrations ZIF-8 can be considered as a possible candidate for PFOS removal, even though it suffers slow surface degradation, it also removes efficiently PFOS molecules from aqueous solutions.

Porous Materials for Water Purification

Water pollution is a growing threat to humanity due to the pervasiveness of contaminants in water bodies. Significant efforts have been made to separate these hazardous components to purify polluted water through various methods. However, conventional remediation methods suffer from limitations such as low uptake capacity or selectivity, and current water quality standards cannot be met. Recently, advanced porous materials (APMs) have shown promise in improved segregation of contaminants compared to traditional porous materials in uptake capacity and selectivity. These materials feature merits of high surface area and versatile functionality, rendering them ideal platforms for the design of novel adsorbents. This Review summarizes the development and employment of APMs in a variety of water treatments accompanied by assessments of task-specific adsorption performance. Finally, we discuss our perspectives on future opportunities for APMs in water purification.

Insight into the key role of oxygen dopants over ball-milled boron nitride for efficient degradation of PFOS alternative 6:2 fluorotelomer sulfonic acid

6:2 Fluorotelomer sulfonic acid (6:2 FTS) has been identified as an alternative to perfluorooctane sulfonic acid but has been proven to cause potential threats to humans and the environment. In this study, boron nitride (BN) photocatalysis was explored for 6:2 FTS degradation with 100% removal (k_obs=1.8 h^-1) and desulfurization rate of 100% as well as the defluorination rate of 57.3%. The superior performance of BN was primarily related to oxygen dopants defects (O-dopants). In addition, O-dopants contribution was confirmed by ball-milled BN (B-BN), which introduced more O-dopants and exhibited an increased 6:2 FTS degradation rate of 2.88 h^-1. The decomposition of 6:2 FTS was attributed to holes (h⁺), hydroxyl radicals (•OH), and superoxide (•O₂-) and proceeded via two pathways, the hydrogen abstraction from ethyl carbons by •OH and the C-S bond activation by h⁺ and •OH. To the best of our knowledge, this is the first study demonstrating that h⁺, •OH, and •O₂^- played significant roles in the heterogeneous photocatalytic degradation of 6:2 FTS.

"Blockchain-Like" MIL-101(Cr)/Carbon Black Electrodes for Unprecedented Defluorination by Capacitive Deionization

Metal-organic frameworks (MOF) have attracted extensive attention due to their ultra-high specific surface area and tunable structure, the mechanism of direct utilization for capacitive deionization (CDI) defluorination remains undefined. Here, MIL-101(Cr) with ultra-high specific surface area, high water stability, and open metal sites (OMSs) is prepared by a hydrothermal method for defluorination of CDI. Carbon black is used as a "chain" to connect F-stored in the holes of MIL-101(Cr) (Cr-MOF)as "blocks" to enhance the conductivity and ion storage capacity of MIL-101(Cr)/carbon black electrodes (Cr-MOF electrodes). This simple construction method avoids the process complexity of in situ synthesis and performs better. These easily constructed "blockchain-like" Cr-MOF electrodes exhibit excellent defluorination capacity (39.84 mg_NaF g_electrodes ^-1 ), low energy consumption (1.2 kWh kg_NaF ^-1 ), and good stability. The coupling of the electrochemical redox reaction of Cr³⁺ /Cr⁴⁺ with confined water is investigated using in situ and ex situ analysis methods combined with density functional theory (DFT), resulting in an unprecedented defluorination mechanism for Cr-MOF electrodes. This study opens up new ideas for the application of MOF in CDI, clarifies the removal mechanism of MOF, and lays a foundation for further promoting the application of raw materials with poor conductivity in the field of CDI.

Multiple interactions steered high affinity toward PFAS on ultrathin layered rare-earth hydroxide nanosheets: Remediation performance and molecular-level insights

The global occurrence of per- and polyfluoroalkyl substances (PFAS) in aquatic systems has raised concerns about their adverse effects on ecosystems and human health. Adsorption is a promising technique for the remediation of PFAS, yet effective adsorbents with rapid uptake kinetics and high adsorption capacity are still in high demand, and molecular-level understanding of the interfacial adsorption mechanisms is lacking. In this study, we developed a superior layered rare-earth hydroxide (LRH) adsorbent, ultrathin Y₂(OH)_4.86Cl_1.44·1·07H₂O (namely YOHCl) nanosheets, to achieve the effective removal of perfluorooctanoic acid (PFOA). YOHCl nanosheets exhibited ultra-high adsorption capacity toward PFOA (up to 957.1 mg/g), which is 1.9 times and 9.3 times higher than the state-of-the-art layered double hydroxides (MgAl-LDH) and benchmark granular activated carbon (GAC) under the same conditions, respectively. Furthermore, YOHCl nanosheets pose stable performance on the removal of PFOA under various water matrices with robust reusability. We also developed YOHCl-based continuous-flow column, demonstrating its promise in simultaneously removing multiple PFAS with wide range of chain lengths at environmentally relevant concentrations. With the molecular-level investigations, we have revealed that multi-mechanism, including ion exchange, electrostatic attraction and bidentate/bridging coordination, contributed to the strong PFOA-YOHCl affinity, leading to the ultra-high adsorption capacity of PFOA. We have provided emerging LRHs-based adsorbents for the effective remediation of PFAS with molecular-level insights on the interfacial mechanisms.

Monolithic and compressible MIL-101(Cr)/cellulose aerogel/melamine sponge based microextraction in packed syringe towards trace nitroimidazoles in water samples prior to UPLC-MS/MS analysis

In this study, MIL-101(Cr)/cellulose aerogel/melamine sponge composite was fabricated through a simple soaking method. The composite was packed in the syringe barrel and used as the sorbent for microextraction in packed syringe. Coupled to UPLC-MS/MS, the proposed method was employed for the analysis of trace nitroimidazoles in water samples. The parameters affecting the extraction efficiency, including sorbent type, pH value of sample solution, sample solution volume and elution solvent were optimized. Under the optimal conditions, good linearity (r > 0.99 for five analytes), high sensitivity (limit of detection: 8.250-16.33 ng L^-1), ideal precision (intra-day precision: 1.1%-5.3%, inter-day precision: 1.8%-6.7%) and satisfactory accuracy (recovery: 70.4%-96.7%) were achieved. The proposed method was proved to be efficient, easily operative and environmentally friendly.

Internalization of the Metal-Organic Framework MIL-101(Cr)-NH2 by a Freshwater Alga and Transfer to Zooplankton

The common metal-organic framework (MOF) MIL-101(Cr)-NH₂ has attracted considerable attention due to its great potential applications in the environmental field. Nevertheless, its behavior and fate in aquatic systems are unknown. This study quantified and visualized the interactions of MIL-101(Cr)-NH₂ with the freshwater phytoplanktonic alga Chlamydomonas reinhardtii and its potential trophic transfer to zooplankton. The unicellular alga absorbed and accumulated the MOF by surface attachment, forming agglomerates and eventually cosettling out from water. Bioimaging revealed that MIL-101(Cr)-NH₂ was internalized by the algal cells and mainly occurred in the pyrenoid. Without algae in a freshwater system, MIL-101(Cr)-NH₂ was ingested by Daphnia magna, showing steadily increasing concentrations approaching 1-9% of dry body weight. Addition of algae substantially suppressed D. magna uptake of MIL-101(Cr)-NH₂ by 63.8-97.9%. Such inhibition could be explained by the competitive uptake of MOF by the algae and the inductive effects of algal food on MOF elimination by D. magna. The MOF (≤1 mg/L) ingested by D. magna was centered in the gut regions, whereas large MOF or algae-MOF aggregates were adsorbed onto the carapace and appendages, including the antennae, at 10 mg/L. Overall, the algae were the major targets for MIL-101(Cr)-NH₂, with nearly all algal cells settling out at 10 mg/L within 24 h. The possibility of trophic transfer of MIL-101(Cr)-NH₂ to D. magna in aquatic systems with algae present was limited due to its low accumulation potential and short retention time in D. magna.

A juxtaposed review on adsorptive removal of PFAS by metal-organic frameworks (MOFs) with carbon-based materials, ion exchange resins, and polymer adsorbents

The removal of poly- and perfluoroalkyl substances (PFAS) from the aquatic environment is a universal concern due to the adverse effects of these substances on both the environment and public health. Different adsorbents, including carbon-based materials, ion exchange resins, biomaterials, and polymers, have been used for the removal of short-chain (C < 6) and long-chain (C > 7) PFAS from water with varying performance. Metal-organic frameworks (MOFs), as a new generation of adsorbents, have also been recently used to remove PFAS from water. MOFs provide unique properties such as significantly enhanced surface area, structural tunability, and improved selectivity compared to conventional adsorbents. However, due to various types of MOFs, their complex chemistry and morphology, different PFAS compounds, lack of standard adsorption test, and different testing conditions, there are inconclusive and contradictory findings in the literature. Therefore, this review aims to provide critical analysis of the performance of different types of MOFs in the removal of long-chain (C > 7), short-chain (C < 6), and ultra-short-chain (C < 3) PFAS and comprehensively study the efficiency of MOFs for PFAS removal in comparison with other adsorbents. In addition, the adsorption mechanisms and kinetics of PFAS components on different MOFs, including Materials of Institute Lavoisier (MIL), Universiteit of Oslo (UiO), Zeolitic imidazolate frameworks (ZIFs), Hong Kong University of Science and Technology (HKUST), and other hybrid types of MOF were discussed. The study also discussed the effect of environmental factors such as pH and ionic strength on the adsorption of PFAS on MOFs. In addition to the adsorption process, the reusability and regeneration of MOFs in the PFAS removal process are discussed. Finally, challenges and future outlooks of the utility of MOFs for PFAS removal were discussed to inspire future critical research efforts in removing PFAS.

Machine learning in the evaluation and prediction models of biochar application: A review

This article reviews recent studies applying machine learning (ML) approaches to biochar applications. We first briefly introduce the general biochar production process. Various aspects are contained, including the biochar application in the elimination of heavy metals and/or organic compounds and the biochar application in environmental and economic scopes, for instance, food security, energy, and carbon emission. The utilization of ML methods, including ANN, RF, and NN, plays a vital role in evaluating and predicting the efficiency of biochar absorption. It has been proved that ML methods can validly predict the adsorption effectiveness of biochar for water heavy metals with higher accuracy. Moreover, the literature proposed a comprehensive data-driven model to forecast biochar yield and compositions under various biomass input feedstock and different pyrolysis criteria. They said a 12.7% improvement in prediction accuracy compared to the existing literature. However, it might need further optimization in this direction. In summary, this review concludes increasing studies that a well-trained ML method can sufficiently reduce the number of experiment trials and working times associated with higher prediction accuracy. Moreover, further studies on ML applications are needed to optimize the trade-off between biochar yield and its composition.

Releasing SiO tetrahedron and AlO octahedron from montmorillonite to enhance the adsorption performance of carbon@chitosan@montmorillonite nanosheet for cationic dyes: Coupling quantum chemistry simulations with experiments

A novel adsorbent of carbon@chitosan@montmorillonite nanosheet (C@CS@ MTN) was successfully fabricated layer-by-layer assembly method to deal with cationic dye wastewater. Batch adsorption experiments showed that the adsorption capacities of MB and RhB were higher than 325 mg·g^-1 and 236 mg·g^-1, respectively, indicating that C@CS@MTN exhibited an excellent adsorption performance. Through quantum chemistry simulations, the molecular electrostatic potential, electron density, differential charge density, molecular orbital distribution and adsorption binding energy were analyzed to reveal the adsorption reaction mechanism between C@CS@MTN and cationic dyes. The results indicated that SiO tetrahedron ring and AlO octahedron ring released from montmorillonite with inherent periodic structure was beneficial to electrostatic attraction, while cation-π interaction benefitted from the interaction between Al atoms of AlO octahedron ring and benzene ring. It was noteworthy that the electron transfer direction of electrostatic attraction was from O atoms of SiO tetrahedron ring to the benzene ring of dye molecules, but the electron transfer direction of cation-π interaction was from benzene ring of dye molecules to Al atoms of AlO octahedron ring. These results provide fundamental theoretical support for the functional design of mineral-based adsorbents and the efficient removal of cationic dyes.

XGBoost model as an efficient machine learning approach for PFAS removal: Effects of material characteristics and operation conditions

Due to the implications of poly- and perfluoroalkyl substances (PFAS) on the environment and public health, great attention has been recently made to finding innovative materials and methods for PFAS removal. In this work, PFAS is considered universal contamination which can be found in many wastewater streams. Conventional materials and processes used to remove and degrade PFAS do not have enough competence to address the issue particularly when it comes to eliminating short-chain PFAS. This is mainly due to the large number of complex parameters that are involved in both material and process designs. Here, we took the advantage of artificial intelligence to introduce a model (XGBoost) in which material and process factors are considered simultaneously. This research applies a machine learning approach using data collected from reported articles to predict the PFAS removal factors. The XGBoost modeling provided accurate adsorption capacity, equilibrium, and removal estimates with the ability to predict the adsorption mechanisms. The performance comparison of adsorbents and the role of AI in one dominant are studied and reviewed for the first time, even though many studies have been carried out to develop PFAS removal through various adsorption methods such as ion exchange, nanofiltration, and activated carbon (AC). The model showed that pH is the most effective parameter to predict PFAS removal. The proposed model in this work can be extended for other micropollutants and can be used as a basic framework for future adsorbent design and process optimization.

The fate of diclofenac in anaerobic fermentation of waste activated sludge

Diclofenac (DCF), a nonsteroidal anti-inflammatory drug, is one of the most commonly detected pharmaceuticals in wastewater treatment plants. However, the fate of DCF in waste activated sludge (WAS) anaerobic fermentation has not been well-understood so far. This work therefore aims to comprehensively reveal whether and how DCF is transformed in WAS mesophilic anaerobic fermentation through both experimental investigation and density functional theory (DFT) calculation. Experimental results showed that ∼28.8% and 45.8% of DCF were respectively degraded during the batch and long-term fermentation processes. Based on the detected intermediates and DFT-predicted active sites, three metabolic pathways, i.e., chlorination, hydroxylation, and dichlorination, responsible for DCF transformation were proposed. DFT calculation also showed that the Gibbs free energy (ΔG) of the three transformation pathways was respectively 19.0, -4.3, and -19.3 kcal/mol, suggesting that the latter two reactions (i.e., hydroxylation and dichlorination) were thermodynamically favorable. Illumina MiSeq sequencing analyses revealed that DCF improved the populations of complex organic degradation microbes such as Proteiniclasticum and Tissierellales, which was in accord with the chemical analyses above. This work updates the fundamental understanding of the degradation of DCF in WAS anaerobic fermentation process and enlightens engineers to apply theoretical calculation to the field of sludge treatment or other complex microbial ecosystems.

Supramolecular assemblies of a newly developed indole derivative for selective adsorption and photo-destruction of perfluoroalkyl substances

Per-/polyfluoroalkyl substances (PFASs) contamination has caused worldwide health concerns, and increased demand for effective elimination strategies. Herein, we developed a new indole derivative decorated with a hexadecane chain and a tertiary amine center (named di-indole hexadecyl ammonium, DIHA), which can form stable nanospheres (100-200 nm) in water via supramolecular assembly. As the DIHA nanospheres can induce electrostatic, hydrophobic and van der Waals interactions (all are long-ranged) that operative cooperatively, in addition to the nano-sized particles with large surface area, the DIHA nanocomposite exhibited extremely fast adsorption rates (in seconds), high adsorption capacities (0.764-0.857 g g^-1) and selective adsorption for perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), outperformed the previous reported high-end PFASs adsorbents. Simultaneously, the DIHA nanospheres can produce hydrated electron (e_aq^-) when subjected to UV irradiation, with the virtue of constraining the photo-generated e_aq^- and the adsorbed PFOA/PFOS molecules entirely inside the nanocomposite. As such, the UV/DIHA system exhibits extremely high degradation/defluorination efficiency for PFOA/PFOS, even under ambient conditions, especially with the advantages of low chemical dosage requirement (μM level) and robust performance against environmental variables. Therefore, it is a new attempt of using supramolecular approach to construct an indole-based nanocomposite, which can elegantly combine adsorption and degradation functions. The novel DIHA nanoemulsion system would shed light on the treatment of PFAS-contaminated wastewater.

Towards Solving the PFAS Problem: The Potential Role of Metal-Organic Frameworks

Per- and polyfluoroalkyl substances (PFAS) are a group of recalcitrant molecules that have been used since the 1940s in a variety of applications. They are now linked to a host of negative health outcomes and are extremely resistant to degradation under environmental conditions. Currently, membrane technologies or adsorbents are used to remediate contaminated water. These techniques are either inefficient at capturing smaller PFAS molecules, have high energy demands, or result in concentrated waste that must be incinerated at high temperatures. This Review focuses on what role metal-organic frameworks (MOFs) may play in addressing the PFAS problem. Specifically, how the unique properties of MOFs such as their well-defined pore sizes, ultra-high internal surface area, and tunable surface chemistry may be a sustainable solution for PFAS contamination.

Enhanced removal of Cd2+ from water by AHP-pretreated biochar: Adsorption performance and mechanism

The sesame straw-derived biochar was successfully prepared via alkaline hydrogen peroxide (AHP) pretreatment in this study. Systematic experimental characterizations, 15 relevant batch and column adsorption models, combined with density functional theory (DFT) calculation were used to investigate the performances and micro-mechanisms of Cd²⁺ adsorption onto biochar. We found AHP-pretreatment could greatly improve the adsorption performance of biochar for Cd²⁺. The maximum Cd²⁺ adsorption capacity of AHP-pretreated biochar (87.13 mg g^-1) was much larger than that of unpretreated biochar. Cd²⁺ adsorption was mainly dominated by the chemisorption of the homogeneous surface monolayer. The hydroxyl and carboxyl groups on the surface of biochar provided preferential adsorption sites, and liquid film diffusion and intra-particle diffusion were two dominant rate-controlling steps. Our results showed that ion exchange, co-precipitation, surface complexation, and Cd²⁺-π interaction were the dominant adsorption mechanisms. Especially, DFT calculations well-identified that lone-pair electrons during complexation and π electrons during coordination were provided by oxygen-containing functional groups and aromatic rings, respectively. The experimental breakthrough curves fitted better with the theoretical value of the BJP model, compared to Thomas, Yoon-Nelson, and EXY models. Overall, our study provides a promising method for Cd²⁺ removal from wastewater and resource utilization of agricultural wastes.

Efficient removal of organophosphate esters by ligand functionalized MIL-101 (Fe): Modulated adsorption and DFT calculations

Organophosphate esters (OPEs) are a new class of flame retardants present in diverse waters. The study focused on the removal of aqueous OPEs using functionalized MIL-101(Fe), which was a representative of the metal-organic frameworks (MOFs). Adsorption kinetics of tris(2-chloroethyl) phosphate (TCEP), tributyl phosphate (TnBP), and triphenyl phosphate (TPhP) were investigated. Additionally, TCEP was selected as the model contaminant to study the adsorption isotherms, thermodynamics, and effect of solution matrix properties. Adsorption mechanisms obtained from the experiments were confirmed using density functional theory (DFT) calculations. Adsorption kinetics indicated that functionalized MOFs provided a significant enhancement to the removal of TCEP. The maximum adsorption capacities q_m of MIL-101(Fe), MIL-101(Fe)-NH₂, MIL-101(Fe)-OH, and MIL-101(Fe)-CH₃ at 298 K for TCEP were 76.040, 282.940, 119.680, and 181.274 μmol/g, respectively. By comparing the adsorption behavior of functionalized MOFs, MIL-101(Fe)-NH₂ was proved to be most efficient for TCEP removal. Based on the adsorption experiments and DFT calculations, TCEP removal was dominated by physical adsorption. The van der Waals (vdW) interactions and hydrogen bonding were assumed to be involved in the adsorption. This work proves that appropriate ligand functionalization is promising for the removal of aqueous OPEs, which also provides a new insight for the control of OPEs pollution.

Phosphate removal and recovery by lanthanum-based adsorbents: A review for current advances

Controlling eutrophication and recovering phosphate from water bodies are hot issues in the 21st century. Adsorption is considered to be the best method for phosphate removal because of its high adsorption efficiency and fast removal rate. Among the many adsorbents, lanthanum (La)-based adsorbents have been paid more and more attention due to their strong affinity to phosphorus. This paper reviews research of phosphate adsorption on La-based adsorbents in different La forms, including lanthanum oxide/hydroxide, lanthanum mixed metal oxide/hydroxide, lanthanum carbonate, La³⁺, La-based metal-organic framework (La-MOF) and La-MOF derivatives. The La-based adsorbents can be loaded on many carriers, such as carbon material, clay minerals, porous silica, polymers, industrial wastes, and others. We find that lanthanum oxide/hydroxide and La³⁺ adsorbents are mostly studied, while those in the forms of lanthanum carbonate, La-MOF, and La-MOF derivatives are relatively few. The kinetic process of most phosphate adsorption is pseudo-second-order and the isotherm process is in accordance with the Langmuir model. The cost of La-based and other traditional adsorbents was compared. The adsorption mechanisms are categorized as electrostatic attraction, ligand exchange, Lewis acid-base interaction, ion exchange and surface precipitation. Besides, regeneration methods of La-based adsorbents are mainly acid, alkali, and salt-alkali. In addition, the La-based adsorbents after absorbing phosphate can be directly used as a slow-release fertilizer. This review provides a basis for the research on phosphate adsorption by La-based adsorbents. It should be carried out to further develop La-based materials with high adsorption capacity and good regeneration ability. Meanwhile, studies have been conducted on the reuse of phosphate after desorption, which needs more attention in future research.

Adsorption of persistent organic pollutants (POPs) from the aqueous environment by nano-adsorbents: A review

The intensification of urbanisation and industrial activities significantly exacerbates the distribution of toxic contaminations into the aqueous environment. Persistent organic pollutants (POPs) have received considerable attention in the past few decades because of their persistence, long-distance migration, potential bioaccumulation, latent toxicity for humans and wildlife. There is no doubt that POPs cause serious effects on the global ecosystem. Therefore, it is necessary to develop a simple, safe and sustainable approach to remove POPs from water bodies. Among other conventional techniques, the adsorption process has proven to be a more effective method for eliminating POPs and to a larger extent meet discharge regulations. Nanomaterials can effectively adsorb POPs from aqueous solutions. For most POPs, a >70% adsorptive removal efficiency was achieved. The major mechanisms for POPS uptake by nano-adsorbents includes electrostatic interaction, hydrophobic (van der Waals, π-π and electron donor-acceptor) interaction and hydrogen bonding. Nano-adsorbent can sustain a >90% POPs adsorptive removal for about 3 cycles and reuseable for up to 10 cycles. Challenges around adsorbent ecotoxicity and safe disposal were also discussed. The present review evaluated recent research outcomes on nanomaterials that are employed to remove POPs in water systems.

Functional group modified 1D interpenetrated metal-organic frameworks on perfluorooctanoic acid adsorption: Experimental and theoretical calculation study

Functional groups modified metal-organic frameworks (MOFs) was synthesized via a pre-tailor method and served as an adsorbent for perfluorooctanoic acid (PFOA) removal. The material was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray diffraction and N₂ sorption-desorption. Monte Carlo simulation and molecular dynamics are derived to predict the possible molecular packing and adsorption mechanism. The Hirshfeld surface with reduced density gradient analysis demonstrates that PFOA is adsorbed on MOF-X mainly affected by van der Waals interactions and steric effects. Adsorption kinetics and isotherms were investigated on the basis of a static experiment. The pseudo-second-order kinetic model and Langmuir isotherm were fitted well to characterize adsorption process. Hereinto, amino-modified MOFs reached the highest adsorption efficiency and the maximum capacity was 185.6 mg/g. Combing the experimental data with theoretical simulation, results indicated that functional group modification is an effective approach to alter the crystal structure and then affect the adsorptive properties of MOFs.