Plastic Debris Is a Human Health Issue

A review on micro- and nanoplastics in humans: Implication for their translocation of barriers and potential health effects

As emerging contaminants, micro- and nanoplastics (MNPs) can absorb and leach various toxic chemicals and ultimately endanger the health of the ecological environment and humans. With extensive research on MNPs, knowledge about MNPs in humans, especially their translocation of barriers and potential health effects, is of utmost importance. In this review, we collected literature published from 2000 to 2023, focusing on MNPs on their occurrence in humans, penetrating characteristics in the placental, blood-brain, and blood-testis barriers, and exposure effects on mammalian health. The characteristics and distributions of MNPs in human samples were analyzed, and the results demonstrated that MNPs were ubiquitous in most human samples, except for kidneys and cerebrospinal fluid. In addition, the phenomenon of MNPs crossing barriers and their underlying mechanisms were discussed. We also summarized the potential factors that may affect the barrier crossing and health effects of MNPs, including characteristics of MNPs, exposure doses, administration routes, exposure durations, co-exposure to other pollutants, and genetic predisposition. Exposure to MNPs may cause cytotoxicity, neurotoxicity, and developmental and reproductive toxicity in mammals. People are encouraged to reduce their exposure to MNPs to prevent these adverse health effects. Finally, we discussed the shortcomings of current research on MNPs in humans, providing a valuable reference for understanding and evaluating the potential health risks from MNP exposure in mammals, including humans.

Microplastic accumulation in groundwater: Data-scaled insights and future research

Given that microplastics (MPs) in groundwater have been concerned for risks to humans and ecosystems with increased publications, a Contrasting Analysis of Scales (CAS) approach is developed by this study to synthesize all existing data into a hierarchical understanding of MP accumulation in groundwater. Within the full data of 386 compiled samples, the median abundance of MPs in Open Groundwater (OG) and Closed Groundwater (CG) were 4.4 and 2.5 items/L respectively, with OG exhibiting a greater diversity of MP colors and larger particle sizes. The different pathways of MP entry (i.e., surface runoff and rock interstices) into OG and CG led to this difference. At the regional scale, median MP abundance in nature reserves and landfills were 17.5 and 13.4 items/L, respectively, all the sampling points showed high pollution load risk. MPs in agricultural areas exhibited a high coefficient of variation (716.7%), and a median abundance of 1.0 items/L. Anthropogenic activities at the regional scale are the drivers behind the differentiation in the morphological characteristics of MPs, where groundwater in residential areas with highly toxic polymers (e.g., polyvinylchloride) deserves prolonged attention. At the local scale, the transport of MPs is controlled by groundwater flow paths, with a higher abundance of MP particles downstream than upstream, and MPs with regular surfaces and lower resistance (e.g., pellets) are more likely to be transported over long distances. From the data-scaled insight this study provides on the accumulation of MPs, future research should be directed towards network-based observation for groundwater-rich regions covered with landfills, residences, and agricultural land.

UVB-Aged Microplastics and Cellular Damage: An in Vitro Study

Plastics are synthetic organic compounds whose widespread use generates enormous waste. Different processes, such as mechanical abrasion, microbiological activity, and UVB irradiation, can fragment the plastic material and generate microplastics (MPs). MPs are ubiquitous, and various organisms, including humans, can ingest or inhale them, with potential adverse health effects. The differences between UV-aged and virgin particles were studied to evaluate the genotoxic damage and oxidative stress induced by polystyrene MPs with 1 and 5 µm sizes on the monocyte-like cell line (THP-1). Fourier transform infrared spectroscopy and Ζ-potential measurements were used to characterise MP particles after UVB exposure. Cells exposed to MPs show a widespread change in the cellular environment with the generation of reactive oxidative species (ROS), as indicated by the increased malondialdehyde level. The occurrence of genotoxic damage is correlated to the smaller size and ageing state of the MPs. The biochemical and genomic alterations observed in this in vitro study suggest that MPs, ubiquitous pollutants, following natural degradation and oxidation processes can cause various adverse effects on the health of the exposed population, making it necessary to carry out further studies to better define the real risk.

The Known and Unknown: Investigating the Carcinogenic Potential of Plastic Additives

Microplastics are routinely ingested and inhaled by humans and other organisms. Despite the frequency of plastic exposure, little is known about its health consequences. Of particular concern are plastic additives─chemical compounds that are intentionally or unintentionally added to plastics to improve functionality or as residual components of plastic production. Additives are often loosely bound to the plastic polymer and may be released during plastic exposures. To better understand the health effects of plastic additives, we performed a comprehensive literature search to compile a list of 2,712 known plastic additives. Then, we performed an integrated toxicogenomic analysis of these additives, utilizing cancer classifications and carcinogenic expression pathways as a primary focus. Screening these substances across two chemical databases revealed two key observations: (1) over 150 plastic additives have known carcinogenicity and (2) the majority (∼90%) of plastic additives lack data on carcinogenic end points. Analyses of additive usage patterns pinpointed specific polymers, functions, and products in which carcinogenic additives reside. Based on published chemical-gene interactions, both carcinogenic additives and additives with unknown carcinogenicity impacted similar biological pathways. The predominant pathways involved DNA damage, apoptosis, the immune response, viral diseases, and cancer. This study underscores the urgent need for a systematic and comprehensive carcinogenicity assessment of plastic additives and regulatory responses to mitigate the potential health risks of plastic exposure.

The triple exposure nexus of microplastic particles, plastic-associated chemicals, and environmental pollutants from a human health perspective

The presence of microplastics (MPs) is increasing at a dramatic rate globally, posing risks for exposure and subsequent potential adverse effects on human health. Apart from being physical objects, MP particles contain thousands of plastic-associated chemicals (i.e., monomers, chemical additives, and non-intentionally added substances) captured within the polymer matrix. These chemicals are often migrating from MPs and can be found in various environmental matrices and human food chains; increasing the risks for exposure and health effects. In addition to the physical and chemical attributes of MPs, plastic surfaces effectively bind exogenous chemicals, including environmental pollutants (e.g., heavy metals, persistent organic pollutants). Therefore, MPs can act as vectors of environmental pollution across air, drinking water, and food, further amplifying health risks posed by MP exposure. Critically, fragmentation of plastics in the environment increases the risk for interactions with cells, increases the presence of available surfaces to leach plastic-associated chemicals, and adsorb and transfer environmental pollutants. Hence, this review proposes the so-called triple exposure nexus approach to comprehensively map existing knowledge on interconnected health effects of MP particles, plastic-associated chemicals, and environmental pollutants. Based on the available data, there is a large knowledge gap in regard to the interactions and cumulative health effects of the triple exposure nexus. Each component of the triple nexus is known to induce genotoxicity, inflammation, and endocrine disruption, but knowledge about long-term and inter-individual health effects is lacking. Furthermore, MPs are not readily excreted from organisms after ingestion and they have been found accumulated in human blood, cardiac tissue, placenta, etc. Even though the number of studies on MPs-associated health impacts is increasing rapidly, this review underscores that there is a pressing necessity to achieve an integrated assessment of MPs' effects on human health in order to address existing and future knowledge gaps.

Disposable surgical/medical face masks and filtering face pieces: Source of microplastics and chemical additives in the environment

The production and consumption of disposable face masks (DFMs) increased intensely during the COVID-19 pandemic, leading to a high amount of them being found in the terrestrial and aquatic environment. The main goal of this research study is to conduct a comparative evaluation of the water-leachability of microplastics (MPs) and chemical additives from various types of disposable surgical/medical face masks (MM DFMs) and filtering face pieces (FFPs). Fourier-Transform Infrared Spectroscopy was used for MPs analysis. Liquid Chromatography/High Resolution Mass Spectrometry was used to analyse analytes presented in the water-leachates of DFMs. FFPs released 3-4 times more microplastic particles compared to MM DFMs. The release of MPs into water from all tested DFMs without mechanical stress suggests potential MP contamination originating from the DFM production process. Our study for the first time identified bisphenol B (0.25-0.42 μg/L) and 1,4-bis(2-ethylhexyl) sulfosuccinate (163.9-115.0 μg/L) as leachables from MM DFMs. MPs in the water-leachates vary in size, with predominant particles <100 μm, and the release order from DFMs is MMIIR > MMII > FFP3>FFP2>MMI. The main type of microplastics identified in the water leachates of the investigated face masks was polypropylene, accounting for 93-97% for MM DFMs and 82-83% for FFPs. Other polymers such as polyethylene, polycarbonate, polyester/polyethylene terephthalate, polyamide/Nylon, polyvinylchloride, and ethylene-propylene copolymer were also identified, but in smaller amounts. FFPs released a wider variety and a higher percentage (17-18%) of other polymers compared to MM DFMs (3-7%). Fragments and fibres were identified in all water-leachate samples, and fragments, particularly debris of polypropylene fibres, were the most common MP morphotype. The findings in this study are important in contributing additional data to develop science-based policy recommendations on the health and environmental impacts of MPs and associated chemical additives originated from DFMs.

Evaluation of microplastics release from solar water disinfection poly(ethylene terephthalate) and polypropylene containers

Public health concern associated with the ingestion of microplastics (MPs) released from water packaging materials is increasing. The use of plastic materials for solar disinfection (SODIS) containers has also raised concerns in the SODIS community due to the lack of studies evaluating the presence of MPs in the treated water. In this work, the migration of MPs from poly(ethylene terephthalate, PET) bottles and polypropylene (PP) translucent and transparent jerrycan containers (TJC) into water under natural weathering was investigated using micro-reflectance Fourier Transform Infrared Spectroscopy (µ-FTIR). Containers exposed to sunlight for three months became photodegraded, releasing micro-sized fragments identified as PET, PP and high-density polyethylene (HDPE, from the screw-caps), although with varying degrees of weathering. It is noteworthy that the presence of a clarifying additive in PP formulation did not seem to impact the release of MPs from the containers. The study showed that PP TJC containers released more MPs than PET bottles. Finally, the size of MPs was measured to determine their fate upon ingestion and highlights the need for further studies to understand the safety of these plastic containers for SODIS.

Prevalence of microplastics in Peruvian mangrove sediments and edible mangrove species

Mangrove ecosystems have been hypothesised as a potential sink of microplastic debris, which could pose a threat to mangrove biota and ecological function. In this field-study we establish the prevalence of microplastics in sediments and commercially-exploited Anadara tuberculosa (black ark) and Ucides occidentalis (mangrove crab) from five different zones in the mangrove ecosystem of Tumbes, Peru. Microplastic were evident in all samples, with an average of 726 ± 396 microplastics/kg for the sediment, although no differences between the different zones of the mangrove ecosystem were observed. Microplastic concentrations were 1.6± 1.1 items/g for the black ark and 1.9 ± 0.9 microplastics/g for the mangrove crab, with a difference in the microplastic abundance between species (p < 0.05), and between the gills and stomachs of the crab (p < 0.01). Human intake of microplastics from these species, for the population in Tumbes, is estimated at 431 items per capita per year. The outcomes of this work highlight that the mangrove ecosystem is widely contaminated with microplastics, presenting a concern for the marine food web and food security.

Microplastics in Ecuador: A review of environmental and health-risk assessment challenges

Pollution from plastic debris and microplastics (MPs) is a worldwide issue. Classified as emerging contaminants, MPs have become widespread and have been found not only in terrestrial and aquatic ecosystems but also within the food chain, which affects both the environment and human health. Since the outbreak of COVID-19, the consumption of single-use plastics has drastically increased, intensifying mismanaged plastic waste in countries such as Ecuador. Therefore, the aim of this review is to 1) summarize the state of MP-related knowledge, focusing on studies conducted with environmental matrices, biota, and food, and 2) analyze the efforts by different national authorities and entities in Ecuador to control MP contamination. Results showed a limited number of studies have been done in Ecuador, which have mainly focused on the surface water of coastal areas, followed by studies on sediment and food. MPs were identified in all samples, indicating the lack of wastewater management policies, deficient management of solid wastes, and the contribution of anthropogenic activities such as artisanal fishing and aquaculture to water ecosystem pollution, which affects food webs. Moreover, studies have shown that food contamination can occur through atmospheric deposition of MPs; however, ingredients and inputs from food production, processing, and packaging, as well as food containers, contribute to MP occurrence in food. Further research is needed to develop more sensitive, precise, and reliable detection methods and assess MPs' impact on terrestrial and aquatic ecosystems, biota, and human health. In Ecuador specifically, implementing wastewater treatment plants in major cities, continuously monitoring MP coastal contamination, and establishing environmental and food safety regulations are crucial. Additionally, national authorities need to develop programs to raise public awareness of plastic use and its environmental effects, as well as MP exposure's effects on human health.

Marine plastic pollution: fishers' coping strategies and its welfare effect in Volta region, Ghana

The issue of marine plastic pollution has drawn significant attention from around the world due to the harm it poses to marine and coastal ecosystems. Despite this, the scholarly literature has not been able to fully explore the coping strategies adopted by fishers and their welfare effects. Motivated by this argument, this study examines the determinants of the coping strategies employed in response to marine plastic pollution, and its effect on fishers' productivity in the Volta region, Ghana. Empirically, the multinomial endogenous switching regression (MESR) model established that the drivers of the coping strategies adopted were age, knowledge, marital status, fishers' experience in fishing, and household size. Fishers that adopted purse net only, drift-gill net only, both purse and drift-gill nets and all the three fishing techniques (purse, drag and drift-gill) have a greater productivity compared to the non-adopters. Policy implications are proposed.

A review on cutinases enzyme in degradation of microplastics

From the surface of the earth to the depths of the ocean, microplastics are a hazard for both aquatic and terrestrial habitats. Due to their small size and vast expanse, they can further integrate into living things. The fate of microplastics in the environment depends upon the biotic components such as microorganisms which have potential enzymes to degrade the microplastics. As a result, scientists are interested in using microorganisms like bacteria, fungi, and others to remediate microplastic. These microorganisms release the cutinase enzyme, which is associated with the enzymatic breakdown of microplastics and plastic films. Yet, numerous varieties of microplastics exist in the environment and their contaminants act as a significant challenge in degrading microplastics. The review discusses the cutinases enzyme degradation strategies and potential answers to deal with existing and newly generated microplastic waste - polyethylene (PE), polyethylene terephthalate (PET), poly-ε-caprolactone (PCL), polyurethanes (PU), and polybutylene succinate (PBS), along with their degradation pathways. The potential of cutinase enzymes from various microorganisms can effectively act to remediate the global problem of microplastic pollution.

Comprehensive analysis of nanoplastic effects on growth phenotype, nanoplastic accumulation, oxidative stress response, gene expression, and metabolite accumulation in multiple strawberry cultivars

Nanoplastics (NPs) have emerged as a novel environmental threat due to their potential impacts on both animals and plants. Currently, research on the ecotoxicity of NPs has mainly focused on marine aquatic organisms and freshwater algae, with very limited investigations conducted on horticultural plants. This study examined the effects of varying concentrations (0, 1, 10, 50 mg·L-1) of polystyrene NPs (PS-NPs) on strawberry growth. The findings revealed that low concentrations of PS-NPs stimulated strawberry growth, whereas high concentrations impeded it. Notably, diverse strawberry cultivars displayed considerable differences in their sensitivity to PS-NP exposure. Laser scanning confocal microscopy confirmed the absorption of PS-NPs by strawberry roots, with variations in PS-NP accumulation observed across different cultivars. Comparative transcriptomics analysis suggested that the differential expression of genes responsible for calcium ion transport played a significant role in the observed intervarietal differences in PS-NP accumulation among strawberry cultivars. Furthermore, distinct variations in endogenous oxidative responses were observed in different strawberry cultivars under PS-NP treatment. Further analysis indicated that the down-regulation of peroxidase (POD) gene expression and terpenoid compounds accumulation were responsible for heightened endogenous oxidative stress observed in certain strawberry cultivars under PS-NP treatment. Transcriptomic and metabolomic analyses were performed on six strawberry cultivars to investigate their response to PS-NPs in terms of endogenous gene expression and metabolite accumulation. The results identified one commonly up-regulated gene (wall-associated receptor kinase-like) and sixteen commonly down-regulated genes associated with lipid metabolism and carbohydrate metabolism. In addition, a significant reduction in fatty acid metabolite accumulation was observed in the six strawberry cultivars under PS-NP treatment. These findings have significant implications for understanding the effects of NPs on strawberry growth, metabolism, and antioxidant responses, as well as identifying marker genes for monitoring and evaluating the impact of NP pollution on strawberry.

The NOAA NCEI marine microplastics database

Microplastics (<5 mm) pollution is a growing problem affecting coastal communities, marine ecosystems, aquatic life, and human health. The widespread occurrence of marine microplastics, and the need to curb its threats, require expansive, and continuous monitoring. While microplastic research has increased in recent years and generated significant volumes of data, there is a lack of a robust, open access, and long-term aggregation of this data. The National Oceanic and Atmospheric Administration (NOAA) National Centers for Environmental Information (NCEI) now provides a global open access to marine microplastics data on an easily discoverable and accessible GIS web map and data portal ( https://www.ncei.noaa.gov/products/microplastics ). The objective of this data portal is to develop a repository where microplastics data are aggregated, archived, and served in a user friendly, consistent, and reliable manner. This work contributes to NCEI's efforts towards data standardization, integration, harmonization, and interoperability among national and international collaborators for monitoring global marine microplastics. This paper describes the NOAA NCEI global marine microplastics database, its creation, quality control procedures, and future directions.

Transdisciplinary pragmatic melioration for the plastic life cycle: Why the social, natural, and technical sciences should prioritize reducing harm

Plastics underpin modern society but also threaten to choke it. Only 9 % of all plastic waste is recycled, usually with loss of quality ("downcycling"); the rest is landfilled or dumped (79 %) or incinerated (12 %). Put bluntly, the "plastic age" needs a "sustainable plastic culture." Consequently, we urgently need to develop a global and transdisciplinary approach not only to fully recycle plastics but also to manage the harms across their life cycle. The past decade has witnessed an explosion in research on new technologies and interventions that purport to help solve the plastic waste challenge; however, this work has, in most cases, been carried forward within single disciplines (for example, researching novel chemical and bio-based technologies for plastic degradation, engineering processing equipment innovations, and mapping recycling behaviours). In particular, although there has been vast progress within individual scientific fields, such work does not address the complexities of various plastic types and waste management systems. Meanwhile, research on the social contexts (and constraints) of plastic use and disposal is rarely in conversation with the sciences to drive innovation. In short, research on plastics typically lacks a transdisciplinary perspective. In this review, we urge the adoption of a transdisciplinary approach that focuses on pragmatic melioration; such an approach combines the natural and technical sciences with the social sciences to focus on the mitigation of harms across the plastic life cycle. To illustrate our case, we review the status of plastic recycling from these three scientific perspectives. Based on this, we advocate 1) foundational studies to identify sources of harm and 2) global/local interventions aimed at those plastics and aspects of the plastic life cycle that cause maximal harm, both in terms of planetary welfare and social justice. We believe this approach to plastic stewardship can be a showcase for tackling other environmental challenges.

Benthic sediment as stores and sources of bacteria and viruses in streams: A comparison of baseflow vs. stormflow longitudinal transport and residence times

The presence of bacteria and viruses in freshwater represents a global health risk. The substantial spatial and temporal variability of microbes leads to difficulties in quantifying the risks associated with their presence in freshwater. Fine particles, including bacteria and viruses are transported and accumulated into shallow streambed (i.e., benthic) sediment, delaying the downstream transmission during baseflow conditions but contributing to their resuspension and transport downstream during stormflow events. Direct measurements of pathogen accumulation in benthic sediments are rare. Until now, the dynamic role of benthic sediment as both a store and source of microbes, has not been quantified. In this study, we analyze microbial abundance in benthic sediment along a 1 km reach of an intermittent Mediterranean stream receiving inputs from the effluent of a wastewater treatment plant, a known point source of microbes in streams. We sampled benthic sediment during a summer drought when the wastewater effluent constituted 100 % of the stream flow, and thus, large accumulation and persistence of pathogens along the streambed was expected. We measured the abundance of total bacteria, Escherichia coli (as a fecal indicator), and presence of enteric rotavirus (RoV) and norovirus (NoV). The abundance of E. coli, based on qPCR detection, was high (4.99∙102 gc /cm2) along the first 100 m downstream of the wastewater effluent input and in general decreased with distance from the source, with presence of RoV and NoV along the study reach. A particle tracking model was applied, that uses stream water velocity as an input, and accounts for microbial exchange into, immobilization, degradation, and resuspension out of benthic sediment during baseflow and stormflow. Rates of exchange into benthic sediment were 3 orders of magnitude higher during stormflow, but residence times were proportionately lower, resulting in increased longitudinal connectivity from up to downstream during stormflow. Model simulations demonstrated mechanistically how the rates of exchange into and out of the benthic sediment resulted in benthic sediment to act as a store during baseflow and a source during stormflow.

The hidden risk of microplastic-associated pathogens in aquatic environments

Increasing studies of plastisphere have raised public concern about microplastics (MPs) as vectors for pathogens, especially in aquatic environments. However, the extent to which pathogens affect human health through MPs remains unclear, as controversies persist regarding the distinct pathogen colonization on MPs as well as the transmission routes and infection probability of MP-associated pathogens from water to humans. In this review, we critically discuss whether and how pathogens approach humans via MPs, shedding light on the potential health risks involved. Drawing on cutting-edge multidisciplinary research, we show that some MPs may facilitate the growth and long-range transmission of specific pathogens in aquatic environments, ultimately increasing the risk of infection in humans. We identify MP- and pathogen-rich settings, such as wastewater treatment plants, aquaculture farms, and swimming pools, as possible sites for human exposure to MP-associated pathogens. This review emphasizes the need for further research and targeted interventions to better understand and mitigate the potential health risks associated with MP-mediated pathogen transmission.

Plastic pollution and fungal, protozoan, and helminth pathogens - A neglected environmental and public health issue?

Plastic waste is ubiquitous in the environment and can become colonised by distinct microbial biofilm communities, known collectively as the 'plastisphere.' The plastisphere can facilitate the increased survival and dissemination of human pathogenic prokaryotes (e.g., bacteria); however, our understanding of the potential for plastics to harbour and disseminate eukaryotic pathogens is lacking. Eukaryotic microorganisms are abundant in natural environments and represent some of the most important disease-causing agents, collectively responsible for tens of millions of infections, and millions of deaths worldwide. While prokaryotic plastisphere communities in terrestrial, freshwater, and marine environments are relatively well characterised, such biofilms will also contain eukaryotic species. Here, we critically review the potential for fungal, protozoan, and helminth pathogens to associate with the plastisphere, and consider the regulation and mechanisms of this interaction. As the volume of plastics in the environment continues to rise there is an urgent need to understand the role of the plastisphere for the survival, virulence, dissemination, and transfer of eukaryotic pathogens, and the effect this can have on environmental and human health.

Current approaches, and challenges on identification, remediation and potential risks of emerging plastic contaminants: A review

Plastics are widely employed in modern civilization because of their durability, mold ability, and light weight. In the recent decade, micro/nanoplastics research has steadily increased, highlighting its relevance. However, contaminating micro/nanoplastics in marine environments, terrestrial ecosystems, and biological organisms is considered a severe threat to the environmental system. Geographical distribution, migration patterns, etymologies of formation, and ecological ramifications of absorption are just a few topics covered in the scientific literature on environmental issues. Degradable solutions from material science and chemistry are needed to address the micro/nanoplastics problem, primarily to reduce the production of these pollutants and their potential effects. Removing micro/nanoplastics from their discharge points has been a central and effective way to mitigate the adverse pollution effects. In this review, we begin by discussing the hazardous effect on living beings and the identification-characterization of micro/nanoplastics. Then, we provide a summary of the existing degradation strategies, which include bio-degradation and advanced oxidation processes (AOPs), and a detailed discussion of their degradation mechanisms is also represented. Finally, a persuasive summary of the evaluated work and projections for the future of this topic is provided.

First quantification and chemical characterization of atmospheric microplastics observed in Seoul, South Korea

This study is the first report on atmospheric microplastics (MPs) observed in five outdoor environments, including an urban forest, a business center, commercial areas, and a public transportation hub in Seoul, South Korea. Air samples were collected using an active air pump sampler for 24 h in each area only on days without rainfall. All observed microplastics are secondary microplastics, in the form of irregularly-shaped fragments or fibers produced through various degradation processes, rather than being primarily produced like microbeads. The abundance of atmospheric MPs varied depending on the environment (i.e., region, height, and time) from 0.33 to 1.21 MP m-3, with the average number of MPs being 0.72 MP m-3 (standard deviation ± 0.39). MPs in the urban forest was observed to be 27% lower in abundance than that in the urban center which is ∼3 km away. The central business district was observed to have a 25% higher abundance during weekdays than on weekends. Our results show the ubiquity of MPs in various areas from high-rise buildings to forests tens of kilometers away from their direct sources, and a positive correlation between the abundance of MP and human activity. Morphologically, the fragment type (87.4%) predominated over the fiber type (12.6%), and chemically, polypropylene (PP) and polyethylene terephthalate (PET) components accounted for 65% of the total MP. PP polymers were found in all observation sites and contributed to 59% of the total MP fragments. The observed fibrous MPs were mainly composed of PET (72.7%) and PP (18.2%) polymers. Compared to other large cities (Shanghai, Beijing, Paris), Seoul is exposed to low levels of atmospheric MPs and high proportions of PP polymers. This study is limited to atmospheric MPs observed in summer and further investigation of MPs is needed to comprehensively understand the distribution and cycle of MPs based on long-term monitoring of atmospheric MPs.

Microplastics in Sepia officinalis caught on the central Adriatic coast: preliminary results

Microplastics (μPs) represent an emerging problem for the marine environment given their wide bioavailability for all aquatic organisms, from zooplankton to top predators. This work aimed to evaluate a method of extracting microplastics from the gastrointestinal tract of 122 Sepia officinalis caught from the Adriatic Sea (along Abruzzo region coasts) to measure its quantity in a poorly investigated species. The extraction method used for gastrointestinal content was performed using 10% potassium hydroxide. In 98/122 (80.32-95% CI=73.27-87.37%) wild animals microplastics were detected with a mean concentration of 6.82±5.52 μPs/subject. Among the fragments, as supported by various authors, those of black color were the most represented ones; however, also blue fibers and transparent spheres were isolated. This study, in agreement with previous ones, poses further attention to the wide microplastic diffusion in the marine environment (surface, columns, sediments, and animals). The obtained results provide the basis for future investigations on this public health concern.

Microplastic pollution of drinking water in a metropolis

This study was conducted to identify microplastics (MPs) in drinking water from various sources in İstanbul that are known to pose potential health risks. One hundred drinking water samples were analysed. Samples were filtered with a glass filter (Ø: 1.0 μm). After filtration, microscopy was used, followed by SEM-EDS and ATR-FTIR identification to characterise MPs. Two shapes (fibers and fragments) and eight polymer types of MPs (ethylene propylene, neoprene, polyethylene, polyethylene terephthalate, polypropylene, polyvinyl chloride, polytetrafluoroethylene, vinyl chloride vinyl acetate copolymer) with sizes of 12-4892 µm (548 ± 777 µm) were detected. These MPs abundances ranged from 10 to 390 MP L^-1 (134 ± 93 MP L^-1). In the identification of MPs detected in filters by FTIR spectroscopy, bisphenol A, which is used in the production of various plastics and described as an important public health problem, was detected in 9.74% of MPs. Within the scope of the Sustainable Development Goals, UNEP has a specific objective of ensuring access to safe, affordable drinking water (SDG 6). With a clear statement, it should be emphasised that MPs are a significant barrier to the provision of safe drinking water, and a comprehensive plan for overcoming this barrier should be developed.

Contribution of plastic and microplastic to global climate change and their conjoining impacts on the environment - A review

Plastics are fossil fuel-derived products. The emissions of greenhouse gases (GHG) during different processes involved in the lifecycle of plastic-related products are a significant threat to the environment as it contributes to global temperature rise. By 2050, a high volume of plastic production will be responsible for up to 13 % of our planet's total carbon budget. The global emissions of GHG and their persistence in the environment have depleted Earth's residual carbon resources and have generated an alarming feedback loop. Each year at least 8 million tonnes of discarded plastics are entering our oceans, creating concerns regarding plastic toxicity on marine biota as they end up in the food chain and ultimately affect human health. The unsuccessful management of plastic waste and its presence on the riverbanks, coastlines, and landscapes leads to the emission of a higher percentage of GHG in the atmosphere. The persistence of microplastics is also a significant threat to the fragile and extreme ecosystem containing diverse life forms with low genetic variation, making them vulnerable to climatic change. In this review, we have categorically discussed the contribution of plastic and plastic waste to global climate change covering the current plastic production and future trends, the types of plastics and plastic materials used globally, plastic lifecycle and GHG emission, and how microplastics become a major threat to ocean carbon sequestration and marine health. The conjoining impact of plastic pollution and climate change on the environment and human health has also been discussed in detail. In the end, we have also discussed some strategies to reduce the climate impact of plastics.

Effect of lithological properties of beach sediments on plastic pollution in Bodrum Peninsula (SW Türkiye)

The effects grain size on transport and retention of plastics in sediments are controversial issue. Four beaches were selected on the Bodrum Peninsula (SW Türkiye) for this study. Twenty-four samples with poorly to well sorted, sandy gravel, gravel, or gravelly sand were collected from the top five cm of the sampling quadrant's four corners and center of 1 m² area, from shoreline and backshore. The highest plastic content (38 mesoplastics/600 g - 455 microplastics (MPs)/1200 g) was determined on the Bodrum Coast having the highest population. Polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS), polyethylene terephthalate (PET) and polyurethane (PU) were predominantly detected with Fourier Transform Infrared Spectroscopy (FTIR) analysis as MPs as a fragment and fiber. This study indicates the negative correlation between grain size and the number of MPs in coastal sediments. Anthropogenic activities are evaluated as a possible primary source of plastic pollution in the study area.

Human occupational exposure to microplastics: A cross-sectional study in a plastic products manufacturing plant

Microplastics are ubiquitous in the natural environment, and their potential impact on health is a key issue of concern. Investigating exposure routes in humans and other living organisms is among the major challenges of microplastics. This study aims to examine the exposure level of plastic factory staff to microplastic particles before and after work shifts through body receptors (hand and facial skin, saliva and hair) in Sirjan, southeast of Iran. Moreover, the effect of face masks, gloves, cosmetics (e.g: face powder cream, lipstick and eye makeup products) and appearance on the exposure level is investigated. In total, 19 individuals are selected during six working days. Then, the collected samples are transferred to the laboratory for filtration, extraction, identification and counting of microplastic particles. Moreover, 4802 microplastic particles (100-5000 μm in size) in strand, polyhedral and spherical shapes and color spectra of white/transparent, black, blue/green, red and purple are observed. The nature of most of the observed samples is fiber with a size ≥1000 μm. Analyzing the selected samples using micro-Raman spectroscopy indicate polyester and nylon are the main identified fibers. Hair and saliva samples have the highest and lowest number of microplastics, respectively. Using gloves and sunscreen among all the participants, wearing a scarf and hair size among women and having a beard and mustache among men could have an effective role in the exposure level to microplastics. Results of this study could reveal the exposure route to microplastic particles in the human body and highlight the importance of providing higher protection to reduce exposure.

Aquatic plastisphere: Interactions between plastics and biofilms

Because of the high production rates, low recycling rates, and poor waste management of plastics, an increasing amount of plastic is entering the aquatic environment, where it can provide new ecological niches for microbial communities and form a so-called plastisphere. Recent studies have focused on the one-way impact of plastic substrata or biofilm communities. However, our understanding of the two-way interactions between plastics and biofilms is still limited. This review first summarizes the formation process and the co-occurrence network analysis of the aquatic plastisphere to comprehensively illustrate the succession pattern of biofilm communities and the potential consistency between keystone taxa and specific environmental behavior of the plastisphere. Furthermore, this review sheds light on mutual interactions between plastics and biofilms. Plastic properties, environmental conditions, and colonization time affect biofilm development. Meanwhile, the biofilm communities, in turn, influence the environmental behaviors of plastics, including transport, contaminant accumulation, and especially the fragmentation and degradation of plastics. Based on a systematic literature review and cross-referencing from these disciplines, the current research focus, and future challenges in exploring aquatic plastisphere development and biofilm-plastic interactions are proposed.

Plastic waste management for sustainable environment: techniques and approaches

Excessive exploitation, negligence, non-degradable nature, and physical and chemical properties of plastic waste have resulted in a massive pollution load into the environment. Consequently, plastic entres the food chain and can cause serious health issues in aquatic animals and humans. The present review summarizes currently reported techniques and approaches for the removal of plastic waste. Many techniques, such as adsorption, coagulation, photocatalysis, and microbial degradation, and approaches like reduction, reuse and recycling are potentially in trend and differ from each other in their efficiency and interaction mechanism. Moreover, substantial advantages and challenges associated with these techniques and approaches are highlighted to develop an understanding of the selection of possible ways for a sustainable future. Nevertheless, in addition to the reduction of plastic waste from the ecosystem, many alternative opportunities have also been explored to cash plastic waste. These fields include the synthesis of adsorbents for the removal of pollutants from aqueous and gaseous stream, their utility in clothing, waste to energy and fuel and in construction (road making). Substantial evidence can be observed in the reduction of plastic pollution from various ecosystems. In addition, it is important to develop an understanding of factors that need to be emphasized while considering alternative approaches and opportunities to cash plastic waste (like adsorbent, clothing, waste to energy and fuel). The thrust of this review is to provide readers with a comprehensive overview of the development status of techniques and approaches to overcome the global issue of plastic pollution and the outlook on the exploitation of this waste as resources.

Evaluating the Global Plastic Waste Management System with Markov Chain Material Flow Analysis

We present a global Markov chain-based material flow analysis of plastic waste of all types to estimate global virgin waste generation and waste mismanagement rates. We model nine alternative scenarios related to the elimination of plastic waste trade and improvements at various stages of the recycling chain, including "limitless" recycling promised by certain new chemical recycling technologies. We found that the elimination of trade increased global mismanagement when displaced waste was disposed but decreased mismanagement when it was instead recycled. Recycling scenarios showed little benefit for limitless recycling without prior increases in collection rates, which are currently the main constraint in the recycling chain. The most ambitious scenario only led to a 34% decrease in virgin waste generation. While significant, this implies that, given our current 40% mismanagement rate and 2050 forecasts of waste generation, landfilling and incineration capacity must increase 2.5-fold in addition to these extreme recycling targets to eliminate waste mismanagement. These results highlight the requirement for waste exporters to increase domestic recycling capacity as trade restrictions become tighter and express the urgent global need for alternative waste reduction interventions in addition to recycling.

Assessment on the pollution level and risk of microplastics on bathing beaches: a case study of Liandao, China

Microplastic pollution on bathing beaches threatens the health of human beings and coastal organisms. There is a lack of assessment on the level of microplastic pollution and the health risk associated with plastics. As one of the earliest open bathing beaches in China, Liandao is well known as the two high-quality beaches. However, little is known about the extent of microplastic pollution on these bathing beaches. Based on the analysis of microplastic pollution abundance, distribution, shape, size, color, and composition at the Liandao bathing beaches, this study puts forward a novel approach to comprehensively evaluate the microplastic pollution level and risk level by using the Nemerow pollution index (NPI) and polymer hazard index (PHI). The results show that the average abundance of microplastics on the Liandao bathing beaches is 135.42 ± 49.58 items/kg; the main shapes are fibers, fragments, and granules. Most of the microplastics are transparent, brown, and black, accounting for 71.54%, and they have an average particle size of 0.63 ± 0.43 mm. The main components are PE, PP, PS, PET, and nylon, of which nylon appears in the highest proportion (54.77%). The microplastic NPI and PHI values are 0.38 and 74.81, respectively, indicating that the pollution level and health risk index of microplastics on the Liandao bathing beaches are both low. With the increase in population and per capita consumption, plastic waste generated on land will continue to increase. Finally, this study puts forward some suggestions regarding microplastic monitoring, plastic waste management, and environmental attitudes and behavior.

Potential Adsorption Affinity of Estrogens on LDPE and PET Microplastics Exposed to Wastewater Treatment Plant Effluents

Microplastics (MPs) are among the most common pollutants in the environment. Because of their small size, availability, and similarity to natural foods, they are commonly ingested by marine organisms. They can cause health problems in living organisms due to their bioaccumulation potential. It is, therefore, unknown whether endocrine-disrupting chemicals (EDCs), in particular estrogens, are capable of adhering to the diverse types of MPs found in water. Two MP polymers (low-density polyethylene (LDPE) and polyethene terephthalate (PET)) that could pose a threat to fish were tested for estrogen adsorption. The adsorption capacity of MP pellets was studied for 30 days in the effluent and influent of a wastewater treatment-plant. A laboratory simulation was conducted to validate the field and laboratory findings. We found that the concentrations of five types of estrogen ((diethylstilbestrol (DES), estrone (E1), 17β-estradiol (E2), estriol (E3), 17α-ethinyl estradiol (EE2)) were higher in the influent than the effluent streams. LDPE and PET MPs exposed to influent water in the laboratory had higher estrogen levels than wastewater treatment plants (WWTP) pellets. The PET pellets showed the highest adsorption affinity to EE2, while the LDPE pellets showed the highest affinity to E2. As a result, this study provided baseline data to investigate the estrogen adsorption capacity in MPs.

Photodissolution of submillimeter-sized microplastics and its dependences on temperature and light composition

Photodissolution has the potential to efficiently remove microplastics from the surface ocean. Here, we examined the effects of temperature and incident sunlight composition on the photodissolution of submillimeter-sized microplastics of polypropylene (PP), polystyrene (PS), and thermoplastic polyurethane (TPU) in seawater. The photoproduction of dissolved organic carbon (DOC), chromophoric dissolved organic matter, and dissolved nitrogen (TPU only) was observed to increase exponentially within 7 days of full-spectrum irradiation. The temperature dependence of photodissolution increased with irradiation time for PP and PS but remained relatively constant for TPU. A 20 °C increase in temperature enhanced DOC photoproduction by 10 times for PP, three times for PS, and four times for TPU at 7-d irradiation, giving activation energies of 59.4-84.8 kJ mol^-1. Photodissolution of all three polymers was exclusively driven by ultraviolet-B (UVB) radiation. PS-derived DOC was photomineralizable, while PP- and TPU-derived DOC appeared photo-resistant. Extrapolating the lab-based DOC photoproduction rates to warm surface oceans yields lifetimes of 6.5 years for PP, 3.6 years for PS, and 3.7 years for TPU. This study demonstrates that photodissolution of the tested microplastics is restricted to the thin UVB-penetrable surface ocean and that water temperature plays a critical role in controlling the photodissolution of these microplastics.

Current status and trends of research on microplastic fugacity characteristics and pollution levels in mangrove wetlands

Microplastics have been widely detected in the environment, while mangrove wetlands are considered barriers to land-based plastic transport to the ocean, requiring special attention. However, the current literature is distributed and broad besides limited information on the fate characteristics and pollution levels. This study uses a systematic literature review method to analyze the current research status and future trends. In this study, the literature is summarized and concluded that Characteristics including color, shape, size, polymer chemistry and surface microstructure are the basic information for microplastic research in mangrove wetlands. Size is the key to studying distribution and convergence without international standards. The shape is vital to study its sources and environmental processes. Color affects biological predation and is important information for studying ecological risk. The chemical composition of plastics is the key to studying microplastics’ fingerprint information, source, and sink. The surface microstructure is an important basis for studying adsorption behavior and aging processes. Mangrove microplastic studies in China are mainly on the southern and southeastern coasts, and microplastic pollution is more severe in Fujian, Guangdong, and Guangxi than in Hainan. In contrast, studies on mangrove microplastics abroad are mainly concentrated in Southeast Asia, the Middle East, and South America. Overall, microplastic contamination was detected in the major distribution areas of mangroves worldwide and was correlated with mangrove density and human activities.

Microplastics in aquatic systems, a comprehensive review: origination, accumulation, impact, and removal technologies

Although the discovery of plastic in the last century has brought enormous benefits to daily activities, it must be said that its use produces countless environmental problems that are difficult to solve. The indiscriminate use and the increase in industrial production of cleaning, cosmetic, packaging, fertilizer, automotive, construction and pharmaceutical products have introduced tons of plastics and microplastics into the environment. The latter are of greatest concern due to their size and their omnipresence in the various environmental sectors. Today, they represent a contaminant of increasing ecotoxicological interest especially in aquatic environments due to their high stability and diffusion. In this regard, this critical review aims to describe the different sources of microplastics, emphasizing their effects in aquatic ecosystems and the danger to the health of living beings, while examining, at the same time, those few modelling studies conducted to estimate the future impact of plastic towards the marine ecosystem. Furthermore, this review summarizes the latest scientific advances related to removal techniques, evaluating their advantages and disadvantages. The final purpose is to highlight the great environmental problem that we are going to face in the coming decades, and the need to develop appropriate strategies to invert the current scenario as well as better performing removal techniques to minimize the environmental impacts of microplastics.

Polystyrene Nanoplastic Exposure Induces Developmental Toxicity by Activating the Oxidative Stress Response and Base Excision Repair Pathway in Zebrafish (Danio rerio)

The widespread accumulation of nanoplastics is a growing concern for the environmental and human health. However, studies on the mechanisms of nanoplastic-induced developmental toxicity are still limited. Here, we systematically investigated the potential biological roles of nanoplastic exposure in zebrafish during the early developmental stage. The zebrafish embryos were subjected to exposure to 100 nm polystyrene nanoplastics with different concentrations (0, 100, 200, and 400 mg/L). The results indicated that nanoplastic exposure could decrease the hatching and survival rates of zebrafish embryos. In addition, the developmental toxicity test indicated that nanoplastic exposure exhibits developmental toxicity via the inhibition of the heart rate and body length in zebrafish embryos. Besides, behavioral activity was also significantly suppressed after 96 h of nanoplastic exposure in zebrafish larvae. Further biochemical assays revealed that nanoplastic-induced activation of the oxidative stress responses, including reactive oxygen species accumulation and enhanced superoxide dismutase and catalase activities, might affect developmental toxicity in zebrafish embryos. Furthermore, a quantitative polymerase chain reaction assay demonstrated that the mRNA levels of the base excision repair (BER) pathway-related genes, including lig1, lig3, polb, parp1, pold, fen1, nthl1, apex, xrcc1, and ogg1, were altered in zebrafish embryos for 24 h after nanoplastic exposure, indicating that the activation of the BER pathway would be stimulated after nanoplastic exposure in zebrafish embryos. Therefore, our findings illustrated that nanoplastics could induce developmental toxicity through activation of the oxidative stress response and BER pathways in zebrafish.

Ingestion and egestion of polystyrene microplastic fragments by the Pacific oyster, Crassostrea gigas

Marine microplastics (MPs) pose a risk to human health through accumulation in maricultural organisms, particularly bivalves. Various studies have reported the presence of MP particles in Pacific oysters (Crasostrea gigas). In this study, we investigated the size-specific ingestion and egestion of polystyrene (PS) MPs by Pacific oysters. The cultivation density of C. gigas was maintained at 1 L of filtered seawater per oyster (n = 5) during the MP ingestion and egestion experiments. On exposure to 300 n/L of PS MP fragments for 7 d, 60.4% of the PS was ingested within 6 h (7.25 × 10² ± 1.36 × 10² n/indv.), and the ingestion was saturated at 12 h (1.2 × 10³ ± 2.2 × 10² n/indv.) in C. gigas. The maximum MP ingestion capacity (Ig_max) of a single Pacific oyster was 73.0 ± 16.3 n/g wet weight. Further, 62.9% of the PS MP particles were egested for 7 d from the saturated single C. gigas. Ingestion and egestion varied according to the PS MP size. In the case of <50 μm PS MP, ingestion rate was low but MP amount and net-ingestion efficiency was significantly higher than other PS MP sizes. In addition, egestion, egestion rate, and net-egestion efficiency for <50 μm PS MPs were significantly higher than other PS MP sizes. Therefore, smaller MPs (<50 μm) normally exhibit the highest ingestion and egestion rates; therefore, the 50-300 μm size fraction exhibited the highest residual possibility (particles >1000 μm were excluded). Additionally, considering the net-egestion efficiency, the most economical and efficient depuration period was 24 h. This study clarifies the size-specific MP accumulation in oysters, and the egestion results suggest that the potential risk of MPs to human health through the intake of maricultural products could be reduced by depuration.

Microplastics in dust from different indoor environments

Microplastics (MPs) are present in global indoor dust, which is an important source of MPs for humans. However, few researchers have investigated differences in the abundance and characteristics of MPs in dust in different indoor environments. In this study, we found that residential apartments (mean: 1174 MPs/g; n = 47) had the highest abundance of MPs in indoor dust samples, followed by offices (896 MPs/g; n = 50), business hotels (843 MPs/g; n = 53), university dormitories (775 MPs/g; n = 48), and university classrooms (209 MPs/g; n = 44). The predominant shape of MPs was fiber in most indoor dust samples. The main size fraction of the MPs in the indoor dust samples from university classrooms and business hotels was 201-500 μm, and it was 501-1000 μm in those from offices, university dormitories, and residential apartments. The main MP polymer in indoor dust samples from business hotels, university dormitories, and residential apartments was polyester, whereas those from offices and university classrooms were mainly polyethylene and polypropylene. We calculated the estimated daily intake (EDI) of MPs through the inhalation of indoor dust, and found that infants (7.4 MPs/kg bw/day) had a higher mean EDI of MPs than toddlers (1.4 MPs/kg bw/day), children (0.49 MPs/kg bw/day), adults (0.23 MPs/kg bw/day), and university students (0.22 MPs/kg bw/day). To the best of our knowledge, we are the first to report differences in MP occurrence in dust samples from different indoor environments, and our findings provide a more accurate understanding of exposure risks of MPs to humans.

A Combination of Machine Learning Algorithms for Marine Plastic Litter Detection Exploiting Hyperspectral PRISMA Data

A significant amount of the produced solid waste reaching the oceans is made of plastics. The amount of plastic debris in the ocean and coastal areas is steadily increasing and is now a major global environmental issue. The monitoring of marine plastic litter, ground-based monitoring systems and/or field campaigns are time-consuming, expensive, require great organisational efforts, and provide very limited information in terms of the spatial and temporal dynamics of marine debris. Earth Observation (EO) by satellite can contribute significantly to marine plastic litter detection. In 2019, a new hyperspectral satellite, called PRISMA, was launched by the Italian Space Agency. The high spectral resolution of PRISMA may allow for better detection of floating plastic materials. At the same time, Machine Learning (ML) algorithms have the potential to find hidden patterns and identify complex relations among data and are increasingly employed in EO. This paper presents the development of a new method of identifying floating plastic objects in coastal areas by exploiting pan-sharpened hyperspectral PRISMA data, based on the combination of unsupervised and supervised ML algorithms. The study consisted of a configuration phase, during which the algorithms were trained in a fully controlled test, and a validation phase, in which the pre-trained algorithms were applied to satellite data collected at different sites and in different periods of the year. Despite the limited input data, results suggest that the tested ML approach, applied to pan-sharpened PRISMA data, can effectively recognise floating objects and plastic targets. The study indicates that increasing input datasets can help achieve higher-quality results.

Understanding and characteristics of coagulation removal of composite pollution of microplastic and norfloxacin during water treatment

Water composite pollution is still a great challenge in the field of water treatment. Especially for microplastic (MP), as an emerging pollutant, its wide distribution in water and persistent eco-environmental influence have received great concerns in recent years. Nevertheless, the removal characteristics and mechanism of conventional coagulation on MP composite pollution is quite insufficient. In this study, the coagulation removal performance and mechanisms of MP (polyethylene, PE) and norfloxacin (NOR) was investigated by polyaluminium chloride (PAC) and anionic polyacrylamide (APAM). Compared with single system, the removal efficiency of PE was significantly improved (>99.0%) under plateau stage in composite system, while the removal efficiency of NOR was slightly decreased to around 42% regardless of the addition of APAM. The scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), zeta potential and One-way analysis of variance (ANOVA) of experimental data were used to explore the coagulation mechanisms. The results demonstrated that the removal of individual PE and NOR was mainly controlled by charge neutralization and sweep flocculation by PAC and APAM, and adsorption by formation of Al-NOR complex, respectively. Importantly, in composite system, the removal of PE was enhanced not only by the stronger charge neutralization but also the adsorption via the formation of PE-NOR-Al complex. Furthermore, the removal efficiency of PE and NOR in neutral and weak alkaline conditions was higher than that in weak acidic or strong alkaline conditions. The presence of metal ions and humic acid had obvious inhibition and promoting effects on the removal efficiency of PE and NOR. This study can provide a new perspective on fundamental understanding in characteristics and mechanisms of MP composite pollutants removed by coagulation.

Can we quantify the aquatic environmental plastic load from aquaculture?

Aquaculture provides livelihoods for hundreds of millions of people, but it also forms a significant source of plastic litter that poses a serious hazard to aquatic ecosystems. How to assess and subsequently manage plastic loads from aquaculture is a pending and pressing issue for aquaculture sustainability, and an important concern for water environment monitoring and management. In this study, we developed the first framework for estimating plastic litter from aquaculture by combining data from satellite remote sensing, drones, questionnaires, and in situ measurements. By acquiring multidimensional (human and nature) and multiscale (centimeter to basin scale) data, this framework helped us understand the aquaculture farming patterns and its spatial and temporal evolution, and thus estimate the plastic load it generates and suggest effective management approaches. Applying this framework, we assessed the marine plastic load from oyster floating raft farming in the Maowei Sea, a typical mariculture bay in China, with an increasing farming area. Approximately 3840 tons of plastic waste is expected to be discharged into the sea in the next four years (the average service life of a floating raft) without improvements in aquaculture waste management. Strengthening governance, timely plastic removal, innovative replacement, and transforming farmers' behavior patterns are recommended as the subsequent measures for plastic management. This framework can be extended to other regions and other aquaculture patterns, and is applicable to local, regional, and global aquaculture plastic litter assessments. It is a source-based method for evaluating plastic pollution that is more conducive to subsequent plastic management than traditional post-contamination environmental monitoring. In the context of the global expansion of mariculture and the global commitment to action to combat plastic pollution, this approach could play a critical role in the investigation and management of plastic waste in aquatic environments.

Rapid Assessment of Biological Activity of Ag-Based Antiviral Coatings for the Treatment of Textile Fabrics Used in Protective Equipment Against Coronavirus

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its variants have rapidly spread worldwide, causing coronavirus disease (COVID-19) with numerous infected cases and millions of deaths. Therefore, developing approaches to fight against COVID-19 is currently the most priority goal of the scientific community. As a sustainable solution to stop the spread of the virus, a green dip-coating method is utilized in the current work to prepare antiviral Ag-based coatings to treat cotton and synthetic fabrics, which are the base materials used in personal protective equipment such as gloves and gowns. Characterization results indicate the successful deposition of silver (Ag) and stabilizers on the cotton and polypropylene fiber surface, forming Ag coatings. The deposition of Ag and stabilizers on cotton and etched polypropylene (EPP) fabrics is dissimilar due to fiber surface behavior. The obtained results of biological tests reveal the excellent antibacterial property of treated fabrics with large zones of bacterial inhibition. Importantly, these treated fabrics exhibit an exceptional antiviral activity toward human coronavirus OC43 (hCoV-OC43), whose infection could be eliminated up to 99.8% when it was brought in contact with these fabrics after only a few tens of minutes. Moreover, the biological activity of treated fabrics is well maintained after a long period of up to 40 days of post-treatment.

Interaction of Phthalates with Lipid Bilayer Membranes

Phthalates are esters of phthalic acid, widely used as additives in the manufacture of plastics. They are not covalently linked to polymer chains and can easily leach out, disperse in the environment, and get into contact with living organisms. Several short chain phthalates are classified as endocrine disruptors or hormonal active agents, and have also been reported to promote various kinds of cancer. However, the biological effects of longer chain analogues are less well known. Moreover, little is known on the permeation of phthalates and their metabolites through biological membranes and on their effects on the physical properties of membranes. Here we explore the interaction of a group of phthalates and their main metabolites with model biological membranes. We focus on three industrially relevant phthalates, with acyl chains of different sizes, and their monoester metabolites. We use molecular dynamics simulations to predict the distribution in model membranes, as well as permeabilities and effects on the structural, dynamic, and elastic properties of the membranes. We find that alterations of membrane properties are significant and only weakly affected by the size of acyl chains, suggesting that modifications of molecular size may not be sufficient to reduce the impact of this class of molecules on the environment and health.

Inhaled tire-wear microplastic particles induced pulmonary fibrotic injury via epithelial cytoskeleton rearrangement

Tire wear microplastic particles (TWMPs) are emerging microplastic pollutants that have gained increasing attention lately. However, the health effect of inhaled airborne TWMPs has never been explored before and may already be included in particulate matter morbidity and mortality. Here, we endeavored to address the preliminary study of TWMP inhalation-induced pulmonary toxic effects and its epigenetic mechanisms in C57BL/6 mice. As a result, restricted ventilatory dysfunction and fibrotic pathological changes were observed in TWMP-treaded mice. Further research found that attenuation of miR-1a-3p plays an important role in TWMP-induced lung injury. Results from in vitro study confirmed that cytoskeleton regulatory gene twinfilin-1 was one of the target genes of miR-1a-3p, and involved in cytoskeleton rearrangement caused by TWMP exposure. Mechanistically, miR-1a-3p inhibited the F-actin formation by targeting cytoskeletal regulatory proteins twinfilin-1, leading to TWMP-induced pulmonary fibrotic injury. While we are in the very early stages of explaining the role of epigenetics in TWMP-induced lung injury, the potential for the use of epigenetic marks as biomarkers is high and discoveries made in this field will likely bring us closer to better understanding this crucial mechanism.

Vertical distribution and river-sea transport of microplastics with tidal fluctuation in a subtropical estuary, China

The river-sea transport of microplastic with complex environmental conditions and diverse driving factors has received growing attention in the estuary. This research investigated the vertical distribution of microplastics in the water column and surface sediments and explored the effect of tidal variation on the transport of microplastics in Jiulong Estuary and Xiamen Bay, China. Results show that the microplastics in the estuary (630 ± 515 μm) was significantly larger than that in the bay (344 ± 420 μm, p < 0.01). Low-density microplastics are present in the whole water column, while high-density microplastics was apt to accumulate in the bottom water and surface sediment suggesting biofouling and material density of microplastics synergistic affect its vertical distribution. Every 1-2 h high-frequency samples collected in a whole tide found the increase of fine size (45-300 μm) and decrease of large size (>300 μm) in the flood tide, which implied fine microplastics were easily driven into the estuary from the bay at flood tide than large microplastics. The abundance of microplastics in the sediments decreased in the fast-rising and fast-falling period implies the tide influences the fragmentation and resuspension of microplastics in the estuary. Finally, the flux of microplastics entering Xiamen Bay was 53.5 t/month in the moderate flow month were estimated based on the abundance of different water layers instead of floating microplastics in the surface water.

Discovery and quantification of plastic particle pollution in human blood

Plastic particles are ubiquitous pollutants in the living environment and food chain but no study to date has reported on the internal exposure of plastic particles in human blood. This study's goal was to develop a robust and sensitive sampling and analytical method with double shot pyrolysis - gas chromatography/mass spectrometry and apply it to measure plastic particles ≥700 nm in human whole blood from 22 healthy volunteers. Four high production volume polymers applied in plastic were identified and quantified for the first time in blood. Polyethylene terephthalate, polyethylene and polymers of styrene (a sum parameter of polystyrene, expanded polystyrene, acetonitrile butadiene styrene etc.) were the most widely encountered, followed by poly(methyl methacrylate). Polypropylene was analysed but values were under the limits of quantification. In this study of a small set of donors, the mean of the sum quantifiable concentration of plastic particles in blood was 1.6 µg/ml, showing a first measurement of the mass concentration of the polymeric component of plastic in human blood. This pioneering human biomonitoring study demonstrated that plastic particles are bioavailable for uptake into the human bloodstream. An understanding of the exposure of these substances in humans and the associated hazard of such exposure is needed to determine whether or not plastic particle exposure is a public health risk.

Microplastics Risk into a Three-Link Food Chain Inside European Hake

Microplastics (MPs) are increasing in the marine environment as well as inside marine organisms, having an important effect on biological diversity. The trophic transfer of MPs was demonstrated under laboratory conditions, but this study is based on the analysis of preys found in stomach contents. MPs from Merluccius merluccius individuals caught in the Cantabrian Sea and preys inside their guts (blue whiting, and northern krill inside blue whiting) were analyzed. MPs with different chemical composition occurred inside every hake and their preys, with different damages, from aquatic life hazards with long lasting effects, to allergic skin reactions and respiratory irritation, not only for aquatic species and fishing resources, but also for humans through hake consumption. The similarity of MPs profiles from gills and seawater samples would support seawater as the main source of gill microplastics. The MPs profile of hake GIT was similar to that of hake preys inside. Despite the small sample size, the presence of MPs in all the tissues analyzed of hakes and their preys, together with the evidence of hazard compositions of some of them, highlights the need for policies and actions to reduce plastic and microplastic production and consumption.

An optimal designed experiment for the alkaline hydrolysis of feather keratin

Feathers, burdensome waste from the poultry industry, can be a cheap source of keratin, a protein with excellent physicochemical, biological, and mechanical properties. Acid and alkaline hydrolyses are usually adopted for isolation of keratin from its natural resources. This study aimed at assessing the statistically significant effect of input variables in the alkaline hydrolysis of keratin from chicken feathers on the process yield and on the molecular weight of peptides obtained. The effect of the volume ratio of 1M NaOH to the feathers' mass, the hydrolysis time, and the shaking speed of the reaction mixture on the process yield were analyzed. The use of statistical analysis at the design step of experiment allowed reducing the trial number from 27 to 9. Among the input variables analyzed, only the volume ratio of 1M NaOH to the feathers' mass had a significant effect on the process yield, while none of them significantly affected the molecular weight of the peptides obtained. All hydrolysates were dominated by two peptides' fractions, with molecular weights of ca. 130 and 250 kDa, and mixture of many peptides of weight close to 10 kDa and smaller. Alkaline hydrolysis of feather keratin yielded protein hydrolysates soluble over a wide pH range.

To Waste or Not to Waste: Questioning Potential Health Risks of Micro- and Nanoplastics with a Focus on Their Ingestion and Potential Carcinogenicity

Micro- and nanoplastics (MNPs) are recognized as emerging contaminants, especially in food, with unknown health significance. MNPs passing through the gastrointestinal tract have been brought in context with disruption of the gut microbiome. Several molecular mechanisms have been described to facilitate tissue uptake of MNPs, which then are involved in local inflammatory and immune responses. Furthermore, MNPs can act as potential transporters ("vectors") of contaminants and as chemosensitizers for toxic substances ("Trojan Horse effect"). In this review, we summarize current multidisciplinary knowledge of ingested MNPs and their potential adverse health effects. We discuss new insights into analytical and molecular modeling tools to help us better understand the local deposition and uptake of MNPs that might drive carcinogenic signaling. We present bioethical insights to basically re-consider the "culture of consumerism." Finally, we map out prominent research questions in accordance with the Sustainable Development Goals of the United Nations.

Microplastics in urban stormwater-developing a methodology for its monitoring

This study presents microplastics results for stormwater collected in retention ponds. A novel procedure was developed to collect microplastic (MP) particles by filtering stormwater using a purpose-built cascade filtration setup which included 4 steel filters of pore size, 48.5, 170, 2500 and 5000 μm. Based on the methodologies proposed in the literature, a novel procedure was developed incorporating a combination of optical and FTIR methods for quantification and identification of microplastics. The developed methodology was applied for determining and characterising MP from two retention ponds. Average concentrations of 2067 and 2133 MP/m³ were observed, respectively, for dry and wet periods at site 1. Similar concentrations were observed for site 2. The results showed a slight increase in the microplastics concentration for the wet period. Most MP particles existed in the size range 48.5-170 μm and 170-2500 μm. Among the type of MP particles, polyester was significantly more abundant than other types of plastics (78-94%). Comparing the data obtained in this study with those from the literature, it was apparent that the stormwater originated from two urban catchments has been subjected to considerable microplastic contamination. This can be attributed to anthropogenic activities in urban areas. Microplastic particles in the stormwater can have an adverse impact on aquatic life present in the receiving water bodies. Also, the presence of MP may suggest the existence of nanoplastics in urban stormwater. This finding can have broader implications for urban stormwater management.

Release of tens of thousands of microfibers from discarded face masks under simulated environmental conditions

While mechanical abrasion by water and sediment is a primary and critical step in weathering process, the upsurge of discarded face masks will undoubtedly become a potential source of micro-/nanofibers owing to the spread of novel coronavirus (COVID-19) pneumonia. However, effects of mechanical abrasion on discarded face masks have neither been seriously addressed nor understood. Therefore, we conducted a simulated experiment to explore abundance, size distribution and morphology of microfibers released from common, surgical and face filtering piece (FFP) masks after mechanical abrasion. Technologies such as Fourier transform infrared spectrometry, fluorescence microscopy, scanning electron microscopy, and confocal laser scanning microscopy were used. Results showed that the abundance of released microfibers followed order of surgical > common > FFP in both water and sediment environments, and the maximum abundance reached 272 ± 12.49 items per square centimeter of mask (items·cm^-2) after sediment abrasion. Taking surgical mask for further investigation, the length of released fiber was observed to vary from 47.78 μm to 3.93 mm, and 72.41-89.58% of the total number of released microfibers fell in the range of 0.1-1 mm. However, microfibers with a very small length (1-100 μm) can occupy 0.09-13.59% of the total number of released fibers in sediment environment. The roughness of fiber surface after sediment abrasion was successively increased. Furthermore, the morphology analysis showed significant changes with countless cracks and many prominent protrusions on fiber surface after sediment abrasion. The cracks and protrusions may further accelerate mask decomposition, thereby potentially resulting in the adsorption of other contaminants and the release of self-containing chemicals. This study provides a valuable database of microfibers released from discarded face masks at the primary but critical stage, and further contributes knowledge on environmental impact of discarded personal protective equipment due to COVID-19.