Selenite Uptake by Ca-Al LDH: A Description of Intercalated Anion Coordination Geometries

Molybdenum-Oxysulfide-Functionalized MgAl-Layered Double Hydroxides─A Sorbent for Selenium Oxoanions

Effective removal of chemically toxic selenium oxoanions at high-capacity and trace levels from contaminated water remains a challenge in current scientific pursuits. Here, we report the functionalization of the MgAl layered double hydroxide with molybdenum-oxysulfide (MoO2S2) anion, referred to as LDH-MoO2S2, and its potential to sequester SeVIO42- and SeIVO32- from aqueous solution. LDH-MoO2S2 nanosheets were synthesized by an ion exchange method in solution. Synchrotron X-ray pair distribution function (PDF) and extended X-ray absorption fine structure (EXAFS) revealed an unexpected transformation of the MoO2S22- to Mo2O2S62- like species during the intercalation process. LDH-MoO2S2 is remarkably efficient in removing SeO42- and SeO32- ions from the ppm to trace level (≤10 ppb), with distribution constant (Kd) ranging from 104 to 105 mL/g. This material showed exceptionally high sorption capacities of 237 and 358 mg/g for SeO42- and SeO32-, respectively. Furthermore, LDH-MoO2S2 demonstrates substantial affinity and efficiency to remove SeO32-/SeO42- even in the presence of competitive ions from contaminated water. Hence, the removal of selenium (VI/IV) oxoanions collectively occurs through reductive precipitation and ion exchange mechanisms. This work provides significant insights into the chemical structure of the MoO2S2 anion into LDH and emphasizes its exceptional potential for high-capacity selenium removal and positioning it as a premier sorbent for selenium oxoanions.

Controllable synthesis of Co-Al layered double hydroxides with different anionic intercalation layers for the efficient removal of methyl orange

In order to investigate the effect of the types of interlayer anions on the adsorption performance of LDHs, herein, we synthesized three cobalt-aluminum layered double hydroxides (CoAl-LDHs) with different interlayer anions (NO3-/Cl-/CO32-). The experimental results demonstrate that the CoAl-LDH (Cl-) exhibited high adsorption capacity of 1372.1 mg/g at room temperature and the fastest adsorption rate on methyl orange (MO), mainly attributed to the excellent ion exchange capacity and high specific surface area and pore volume. Furthermore, the ion exchange driven by electrostatic interaction, hydrogen bonding, and surface complexation might be the main mechanisms for MO adsorption on CoAl-LDH (Cl-) and CoAl-LDH (NO3-). However, the MO adsorption on CoAl-LDH (CO32-) was strongly pH-dependent and the optimal pH value was about 3.5. Additionally, the supramolecular structure of CoAl-LDHs-MO was formed through electrostatic interaction, hydrogen bonding, and surface complexation between the host hydroxide layers and the guest MO- after adsorption equilibrium. An in-depth understanding of the differences in the adsorption performance of three anion-intercalated CoAl-LDHs will provide opportunities for further improvement of the adsorption capacity and exhibit a bright future for the design and optimization of efficient nano-adsorbents shortly.

Oxide- and Silicate-Water Interfaces and Their Roles in Technology and the Environment

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by "anomalies" or "non-idealities" such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide- and silicate-water interfaces. This critical review discusses how science progresses from understanding ideal solid-water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. We anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.

Selenium Oxoanions Removal from Wastewater by MoS42− Intercalated FeMgAl LDH: Catalytic Roles of Fe and Mechanism Insights

FeMgAl−MoS4 LDH was successfully synthesized by a one-pot hydrothermal process followed by ion-exchange methods, and this novel adsorbent was first conducted for aqueous selenite and selenate elimination. The Fe as a component for metal cation layers of LDHs could modulate the layer charge density, leading to more functional groups inserted into layers, and more importantly, this heterogeneous Fe can catalyze the surface reactions between Se(IV) or Se(VI) with S(-II) for oxoanions sequestration. The mechanisms are ion exchange between functional groups with HSeO3− and SeO32− for Se(IV) or SeO42− for Se(VI), followed by reduction by S(-II) from MoS42− groups. The existence of Fe in LDH cation layers, obviously enhanced the reactions (almost two times more for Se(IV) and three times more for Se(VI), respectively), resulting in satisfying adsorption capacities of 483.9 mg/g and 167.2 mg/g for Se(IV) and Se(VI), respectively. Mechanisms were further revealed by elementary analysis, XRD, FT−IR, SEM−EDX, and XPS, as well as the quantitative study. For sorption kinetics, the calculated values of capacities from the pseudo-second-order model are much closer to the experimental values. For sorption isotherms, Langmuir is better than the Freundlich isotherms model for closer capacities (505 mg/g for selenite and 172 mg/g for selenate). All these results demonstrated that the presence of heterogeneous Fe could catalyze the reduction of Se (IV/VI) for the aqueous system, and maybe other high oxidative states hazardous ions. So FeMgAl−MoS4 is a kind of novel adsorbent that offers a promising multi-functional and highly efficient solution for water selenium purification.

Selenium Nanowire Formation by Reacting Selenate with Magnetite

The mobility of ⁷⁹Se, a fission product of ²³⁵U and long-lived radioisotope, is an important parameter in the safety assessment of radioactive nuclear waste disposal systems. Nonradioactive selenium is also an important contaminant of drainage waters from black shale mountains and coal mines. Highly mobile and soluble in its high oxidation states, selenate (Se(VI)O₄^2-) and selenite (Se(IV)O₃^2-) oxyanions can interact with magnetite, a mineral present in anoxic natural environments and in steel corrosion products, thereby being reduced and consequently immobilized by forming low-solubility solids. Here, we investigated the sorption and reduction capacity of synthetic nanomagnetite toward Se(VI) at neutral and acidic pH, under reducing, oxygen-free conditions. The additional presence of Fe(II)_aq, released during magnetite dissolution at pH 5, has an effect on the reduction kinetics. X-ray absorption spectroscopy analyses revealed that, at pH 5, trigonal gray Se(0) formed and that sorbed Se(IV) complexes remained on the nanoparticle surface during longer reaction times. The Se(0) nanowires grew during the reaction, which points to a complex transport mechanism of reduced species or to active reduction sites at the tip of the Se(0) nanowires. The concomitant uptake of aqueous Fe(II) and Se(VI) ions is interpreted as a consequence of small pH oscillations that result from the Se(VI) reduction, leading to a re-adsorption of aqueous Fe(II) onto the magnetite, renewing its reducing capacity. This effect is not observed at pH 7, where we observed only the formation of Se(0) with slow kinetics due to the formation of an oxidized maghemite layer. This indicates that the presence of aqueous Fe(II) may be an important factor to be considered when examining the environmental reactivity of magnetite.

Treatment technologies for selenium contaminated water: A critical review

Selenium is an indispensable trace element for humans and other organisms; however, excessive selenium in water can jeopardize the aquatic environment. Investigations on the biogeochemical cycle of selenium have shown that anthropogenic activities such as mining, refinery, and coal combustion mainly contribute to aquatic selenium pollution, imposing tremendous risks on ecosystems and human beings. Various technologies thus have been developed recently to treat selenium contaminated water to reduce its environmental impacts. This work provides a critical review on the applications, characteristics, and latest developments of current treatment technologies for selenium polluted water. It first outlines the present status of the characteristics, sources, and toxicity of selenium in water. Selenium treatment technologies are then classified into three categories: 1) physicochemical separation including membrane filtration, adsorption, coagulation/precipitation, 2) redox decontamination including chemical reduction and catalysis, and 3) biological transformation including microbial treatment and constructed wetland. Details of these methods including their overall efficiencies, applicability, advantages and drawbacks, and latest developments are systematically analyzed and compared. Although all these methods are promising in treating selenium in water, further studies are still needed to develop sustainable strategies based on existing and new technologies. Perspectives on future research directions are laid out at the end.

Mechanisms and thermodynamic modelling of iodide sorption on AFm phases

Both, experimental and modelling evidence is presented in this study showing that interlayer anion exchange is the dominant sorption mechanism for iodide (I^-) on AFm phases. AFm phases are Ca-Al(Fe) based layered double hydroxides (LDH) known for their large potential for the immobilization of anionic radionuclides, such as dose-relevant iodine-129, emanating from low- and intermediate-level radioactive waste (L/ILW) repositories. Monosulfate, sulfide-AFm, hemicarbonate and monocarbonate are safety-relevant AFm phases, expected to be present in the cementitious near-field of such repositories. Their ability to bind I^- was investigated in a series of sorption and co-precipitation experiments. The sorption of I^- on different AFm phases was found to depend on the type of the interlayer anion. Sorption R_d values are very similar for monosulfate, sulfide-AFm and hemicarbonate. A slightly higher uptake occurs by AFm phases with a singly charged anion in the interlayer (HS-AFm) as compared to AFm with divalent ions (monosulfate), whereas uptake by hemicarbonate is intermediate. No significant sorption occurs onto monocarbonate. Our derived thermodynamic solid solution models reproduce the experimentally obtained sorption isotherms on HS-AFm, hemicarbonate and monosulfate, indicating that anion exchange in the interlayer is the dominant mechanism and that the contribution of I^- electrostatic surface sorption to the overall uptake is negligible.

An economical strategy towards the managing of selenium pollution from contaminated water: A current state-of-the-art review

During the last few decades, contamination of selenium (Se) in groundwater has turned out to be a major environmental concern to provide safe drinking water. The content of selenium in such contaminated water might range from 400 to 700 μg/L, where bringing it down to a safe level of 40 μg/L for municipal water supply employing appropriate methodologies is a major challenge for the global researcher communities. The current review focuses mostly on the governing selenium remediation technologies such as coagulation-flocculation, electrocoagulation, bioremediation, membrane-based approaches, adsorption, electro-kinetics, chemical precipitation, and reduction methods. This study emphasizes on the development of a variety of low-cost adsorbents and metal oxides for the selenium decontamination from groundwater as a cutting-edge technology development along with their applicability, and environmental concerns. Moreover, after the removal, the recovery methodologies using appropriate materials are analyzed which is the need of the hour for the reutilization of selenium in different processing industries for the generation of high valued products. From the literature survey, it has been found that hematite modified magnetic nanoparticles (MNP) efficiently adsorb Se (IV) (25.0 mg/g) from contaminated groundwater. MNP@hematite reduced Se (IV) concentration from 100 g/L to 10 g/L in 10 min at pH 4-9 using a dosage of 1 g/L. In 15 min, the magnetic adsorbent can be recycled and regenerated using a 10 mM NaOH solution. The adsorption and desorption efficiencies were over 97% and 82% for five consecutive cycles, respectively. To encourage the notion towards scale-up, a techno-economic evaluation with possible environmentally sensitive policy analysis has been introduced in this article to introspect the aspects of sustainability. This type of assessment is anticipated to be extremely encouraging to convey crucial recommendations to the scientific communities in order to produce high efficiency selenium elimination and further recovery from contaminated groundwater.

Distribution, origin and speciation of soil selenium in the black soil region of Northeast China

Selenium (Se) is an essential trace element within human beings that hold with crucial biological functions. Investigating the complex origin of soil Se is of great importance to scientifically approach the land use of Se-rich land use, and the respective promotion of regional economic development. In this study, 160 soil samples from 10 profiles in farmland and woodland were collected in Hailun city, which is a typical black soil region in Northeast China, in order to characterize the distribution and speciation of Se in the black soil, and to identify the origin of soil Se. The total selenium content in the soil ranges from 0.045 to 0.444 μg g^-1, with an average selenium content in black soil (0.318 μg g^-1) of three times greater than that found in the yellow-brown soil (0.114 μg g^-1). The land-use type has a significant influence on the distribution of selenium in the black soil. Moreover, Se and heavy metals have a significant (positive or negative) correlation, in which TOC plays an important role. The black soil presents a consistent REE distribution pattern with underlying yellow-brown soil indicating black soil originates from yellow-brown soil. REE geostatistical analysis suggests that the soil Se partly originates from shale weathering and enriches in black soil. Moreover, elemental geochemical analysis and XRD results show that the paleoclimate change from humid and warm to dry and cold is favorable for organic matter accumulation, resulting in less leaching and enhanced adsorption of selenium into the black soil.

Investigation on the efficient separation and recovery of Se(IV) and Se(VI) from wastewater using Fe–OOH–bent

Decontamination of the toxic selenium compound, selenite (Se(IV)) and selenate (Se(VI)), from wastewater is imperative for environmental protection. Efficient approaches to remove Se(IV) and Se(VI) are in urgent needs. In this work, an accessible adsorbent Fe–OOH–bent was prepared and applied for the removal of Se(IV) and Se(VI) from wastewater. The batch experimental results demonstrate that Fe–OOH–bent exhibits high adsorption capacities of 5.01 × 10−4 and 2.28 × 10−4 mol/g for Se(IV) and Se(VI) respectively, which are higher than most of the reported bentonite based materials, especially in the case of Se(VI). Moreover, the Fe–OOH–bent displayed superior selectivity towards Se(IV) and Se(VI) even in the presence of excess competitive anions (Cl−, HCO3 −, NO3 −, SO4 2− and PO4 3−) and HA with concentrations of 1000 times higher than Se(IV) and Se(VI). By evaluating the adsorption ratio of Se(IV) and Se(VI), the reusability of Fe–OOH–bent was great through five adsorption-desorption cycles. For practical application, the column experiments were performed with simulated wastewater samples. The breakthrough and eluting curves of Se(IV) and Se(VI) were investigated through the columns packed with Fe–OOH–bent, and the results show that Se(IV) and Se(VI) can be successfully separated and recovered using 0.1 mol/L Na2SO4 (pH = 9.0) and 0.1 mol/L Na3PO4 (pH = 9.0), respectively. Our work provides a new approach for fractional separation as well as the recovery of Se(IV) and Se(VI) from wastewater.

Ultrastrong Anion Affinity of Anionic Clay Induced by Its Inherent Nanoconfinement

Layered double hydroxide (LDH), the only anionic clay in the environment, plays a key role in natural ion transportation. The ion retention effect of LDHs was traditionally attributed to ion exchange with low affinity. Here, we demonstrated an ultrastrong interaction between anions and LDHs induced by their inherent nanoconfinement using chromium ore processing residue (COPR) that contained several Cr(VI)-bonded LDHs as a probe. Hydrocalumite (Ca/Al-Cl LDH) was verified as the primary phase for Cr(VI) retention through two types of interactions such as ion exchange and Cr-Ca coordination. More significantly, the confined spacing between two layers of hydrocalumite provided spatial restriction and shielding effects to the intercalated Cr(VI), which enhanced Cr-Ca coordination by shortening the bonding distance and modulating the binding angle to achieve the lowest bonding energy. Such enhancement boosted Cr(VI) affinity up to 3.2 × 10⁵ mL/g, which was 1-3 orders of magnitudes higher than ion exchange. The universality of this mechanism was verified using another Mg/Al-Cl LDH and various anions. This study broke the traditional awareness of low ion affinities of LDHs limited by single ion exchange and disclosed an essential mechanism for unexpected ion retention effects of anionic clays in nature.

In vitro cytotoxicity studies of smart pH-sensitive lamivudine-loaded CaAl-LDH magnetic nanoparticles against Mel-Rm and A-549 cancer cells

In this study, an effective nano-drug delivery system was prepared by the co-precipitation method via two steps; the preparation of Fe₃O₄ magnetic nanoparticles and its surface modification with layered double hydroxide (LDH) and loading lamivudine on this nanocarrier (Fe₃O₄@CaAl-LDH@Lamivudine). The developed nanoparticles (NPs) were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray analysis, Fourier-transformed infrared spectroscopy, vibrating-sample magnetometry, thermogravimetric analysis, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller. The prepared system demonstrated an average size of 130 nm. Also, the drug entrapment efficiency was estimated at ∼70%. In vitro, drug release investigations showed a controlled and pH-dependent lamivudine release over 300 min. The in vitro cytotoxic activity of Fe₃O₄@CaAl-LDH@Lamivudine NPs was explored against Mel-Rm and A-549 cancer cell lines in comparison with lamivudine and nanocarrier using lactate dehydrogenase colorimetric and MTT assay. The results of the MTT assay revealed that the Fe₃O₄@CaAl-LDH@Lamivudine NPs significantly inhibited the proliferation of Mel-Rm and A-549 cells in a dose-dependent manner. The influences of Fe₃O₄@CaAl-LDH@Lamivudine on the cancer cell lines by different therapeutic investigation illustrated the remarkable effect in comparison with free drug. Finally, the achieved consequences confirm the anticancer properties of Fe₃O₄@CaAl-LDH@Lamivudine and indicate that they may be a cost-effective substitute in the treatment of lung and skin cancer.Communicated by Ramaswamy H. Sarma.

Influence of Surface Compositions on the Reactivity of Pyrite toward Aqueous U(VI)

Pyrite plays a significant role in governing the mobility of toxic uranium in an anaerobic environment via an oxidation-reduction process occurring at the mineral-water interface, but the factors influencing the reaction kinetics remain poorly understood. In this study, natural pyrites with different impurities (Pb, As, and Si) and different surface pretreatments were used to react with aqueous U(VI) from pH ∼3.0 to ∼9.5. Both aqueous and solid results indicated that freshly crushed pyrites, which do have more surface Fe²⁺/Fe³⁺ and S^2- sites that were generated from breakage of Fe(S)-S bonds during ball milling, exhibited a much stronger reactivity than those treated with acid washing. Besides, U(VI) reduction which involves the possible intermediate U(V) and the formation of hyperstoichiometric UO_2+x(s) was found to preferentially occur at Pb- and As-rich spots on the pyrite surface, suggesting that the incorporated impurities could act as reactive sites because of the generation of lattice defects and galena- and arsenopyrite-like local configurations. These reactive surface sites can be removed by acid washing, leaving a pyrite surface nearly inert toward aqueous U(VI). Thus, reactivity of pyrite toward U(VI) is largely governed by its surface compositions, which provides an insight into the chemical behavior of both pyrite and uranium in various environments.

Selenite Sorption on Hydrated CEM-V/A Cement in the Presence of Steel Corrosion Products: Redox vs Nonredox Sorption

Reinforced cementitious structures in nuclear waste repositories will act as barriers that limit the mobility of radionuclides (RNs) in case of eventual leakage. CEM-V/A cement, a ternary blended cement with blast furnace slag (BFS) and fly ash (FA), could be qualified and used in nuclear waste disposal. Chemical interactions between the cement and RNs are critical but not completely understood. Here, we combined wet chemistry methods, synchrotron-based X-ray techniques, and thermodynamic modeling to explore redox interactions and nonredox sorption processes in simulated steel-reinforced CEM-V/A hydration systems using selenite as a molecular probe. Among all of the steel corrosion products analyzed, only the addition of Fe⁰ can obviously enhance the reducing ability of cement toward selenite. In comparison, steel corrosion products showed stronger reducing power in the absence of cement hydrates. Selenium K-edge X-ray absorption spectroscopy (XAS) revealed that selenite immobilization mechanisms included nonredox inner-/outer-sphere complexations and reductive precipitations of FeSe and/or Se(0). Importantly, the hydrated pristine cement showed a good reducing ability, driven by ferrous phases and (bi)sulfides (as shown by sulfur K-edge XAS) originated from BFS and FA. The overall redox potential imposed by hydrated CEM-V/A was determined, hinting to a redox shift in underground cementitious structures.

Favorable Intercalation of Nitrate Ions with Fluorine-Substituted Layered Double Hydroxides

Understanding and controlling confined nanospace to accommodate substrates and promote high ion conduction are essential to various fields. Layered double hydroxides (LDHs) have emerged as promising candidates for anion exchangers using the interlayer nanospace in their crystal structures. Miyata reported in 1983 that the affinity of anions for intercalation with most major Mg-Al LDHs increased in the following order: NO₃^- < Br^- < F^- < SO₄^2- < HPO₃^2-. Attempts to alter the affinity with different metal cations (M²⁺ and M³⁺) have been unsuccessful. Analyses of the crystalline structures of LDHs, positively charged host layers, interlayer anions, and interlayer water molecules indicate that they inevitably interact through hydrogen bonding. In other words, the affinity of LDHs for anions is controlled by tuning the hydrogen bonding. In this study, we prepared fluorine-substituted LDHs (F-LDHs) with different Mg/Al ratios by partially replacing the OH structural groups, which originated from the host layer, with fluorine atoms; the resulting change in affinity was investigated. The distribution coefficient, which is a useful indicator of the affinity of an LDH for a particular anion, was examined. The results showed that only F-LDHs with Mg/Al ratios of 3.5 exhibited high affinity, especially for NO₃^- ions, and the affinity increased in the following order: HPO₄^2- < SO₄^2- < F^- < Br^- < NO₃^-. The separation factors of these specific F-LDHs with respect to both NO₃^-/F^- and NO₃^-/SO₄^2- were higher than that of LDHs with other compositions by 1 order of magnitude. Raman spectroscopy above 3000 cm^-1 revealed that the fluorine substitution of LDHs significantly changed the hydrogen bonding nature in the interlayer space. Highly electronegative fluorine atoms significantly decrease the extent of hydrogen bonding interactions between OH structural groups and both interlayer water molecules and anions, wherein steric effects are induced by the shrunken interlayer space, and van der Waals forces are revealed to be the predominant interaction with anions. Therefore, the highest affinity was observed for NO₃^- ions in F-LDHs.

Achieving arsenic concentrations of <1 μg/L by Fe(0) electrolysis: The exceptional performance of magnetite

Consumption of drinking water containing arsenic at concentrations even below the World Health Organization provisional limit of 10 μg/L can still lead to unacceptable health risks. Consequently, the drinking water sector in the Netherlands has recently agreed to target 1 μg/L of arsenic in treated water. Unfortunately, in many poor, arsenic-affected countries, the costs and complexity of current methods that can achieve <1 μg/L are prohibitive, which highlights the need for innovative methods that can remove arsenic to <1 μg/L without costly support infrastructure and complicated supply chains. In this work, we used Fe(0) electrolysis, a low cost and scalable technology that is also known as Fe(0) electrocoagulation (EC), to achieve <1 μg/L residual dissolved arsenic. We compared the arsenic removal performance of green rust (GR), ferric (oxyhydr)oxides (Fe(III) oxides) and magnetite (Mag) generated by EC at different pH (7.5 and 9) in the presence of As(III) or As(V) (initial concentrations of 200-11,000 μg/L). Although GR and Fe(III) oxides removed up to 99% of initial arsenic, neither Fe phase could reliably meet the 1 μg/L target at both pH values. In contrast, EC-generated Mag consistently achieved <1 μg/L, regardless of the initial As(V) concentration and pH. Only solutions with initial As(III) concentrations ≥2200 μg/L resulted in residual arsenic >1 μg/L. As K-edge X-ray absorption spectroscopy showed that Mag also sorbed arsenic in a unique mode, consistent with partial arsenic incorporation near the particle surface. This sorption mode contrasts with the binuclear, corner sharing surface complex for GR and Fe(III) oxides, which could explain the difference in arsenic removal efficiency among the three Fe phases. Our results suggest that EC-generated Mag is an attractive method for achieving <1 μg/L particularly in decentralized water treatment.

A Facile Synthesis of Core-Shell SiO2@Cu-LBMS Nano-Microspheres for Drug Sustained Release Systems

A well-dispersed SiO₂@Layered hydroxide cupric benzoate (SiO₂@Cu-LBMS) with a hierarchical structure have been synthesized by a facile method. The layered hydroxide cupric benzoate with a structure of layered basic metal salt (Cu-LBMS) was directly deposited on the surface of silica spheres without any blinder. The morphology of the SiO₂@Cu-LBMS nano-microsphere was observed by SEM, and the reaction conditions was also discussed. In addition, the XRD patterns and FTIR spectra provide consistent evidence to the formation of SiO₂@Cu-LBMS nano-microspheres. The release behavior and drug loading capability of SiO₂@Cu-LBMS microspheres were also investigated by using ibuprofen, aspirin and salicylic acid as model drugs. The results indicated that the drug loading capability of SiO₂@Cu-LBMS nano-microspheres was much larger than layered hydroxide cupric benzoate, and the releasing time was significantly prolonged than layered hydroxide cupric benzoate and their physical mixture.

Suppression processes of anionic pollutants released from fly ash by various Ca additives

Harmful trace elements, which are initially included in the coal fly ash, have the potential to be leached when coal fly ash comes in contact with water. This causes a risk of pollutant species being released, considering the long lifetime of building structures where coal fly ash was applied. Some Ca additives effectively function to suppress the release of anionic pollutants; however, the detailed suppression processes remains unclear. In this work, the influences of various Ca additives on the released anionic pollutants (B, F, S, As, and Cr) was systematically investigated. According to the comprehensive results of solution data with the solid characterization, the 60% hydroxylated calcined dolomite (HCD 60) was the best Ca additive for the suppression of different anionic pollutants since this Ca source not only simply provides an alkaline reagent but also supplies MgO and Mg(OH)₂, which affect the phase transformation that accompanies with hydration. The phase transformation occurs from Ca(OH)₂ to ettringite via hydrocalumite, which is the most important suppression processes of released pollutants. The precipitation of Ca salts is another pathway to immobilize these pollutants. In this scheme, MgO and Mg(OH)₂ were proven to enhance the formation of ettringite and hydrocalumite, respectively.

A comprehensive review on environmental transformation of selenium: recent advances and research perspectives

Selenium (Se) is an important micronutrient and essential trace element for both humans and animals, which exist in the environment ubiquitously. Selenium deficiency is an important issue worldwide, with various reported cases of its deficiency. Low selenium contents in some specific terrestrial environments have resulted in its deficiency in humans. However, high levels of selenium in the geochemical environment may have harmful influences and can cause a severe toxicity to living things. Due to its extremely narrow deficiency and toxicity limits, selenium is becoming a serious matter of discussion for the scientists who deals with selenium-related environmental and health issues. Based on available relevant literature, this review provides a comprehensive data about Se sources, levels, production and factors affecting selenium bioavailability/speciation in soil, characteristics of Se, biogeochemical cycling, deficiency and toxicity, and its environmental transformation to know the Se distribution in the environment. Further research should focus on thoroughly understanding the concentration, speciation, Se cycling in the environment and food chain to effectively utilize Se resources, remediate Se deficiency/toxicity, and evaluate the Se states and eco-effects on human health.

Micro-nanostructured δ-Bi2O3 with surface oxygen vacancies as superior adsorbents for SeOx2- ions

Removal of the toxic selenium compounds, selenite (SeO₃^2-) and selenate (SeO₄^2-), from contaminated water is imperative for environmental protection in both developing and industrialized countries. Providing high selectivity adsorbents to the target ions is a big challenge. Here we report that micro sphere-like δ-Bi₂O₃ (MS-δ-Bi₂O₃) with surface oxygen vacancy defects can capture hypertoxic SeO_x^2- anions from aqueous solutions with superior capacity and fast uptake rate. High capture selectivity to SeO₃^2- anions is observed, since the O atoms of SeO₃^2- anions fill the oxygen vacancies on the (111) facet of δ-Bi₂O₃ forming a stable complex structure. This mechanism is distinctly different from other known mechanisms for anion removal, and implies that we may utilize surface defects as highly efficient and selective sites to capture specific toxic species. Thus, we present a new route here to design superior adsorbents for toxic ions.

Effect of anion co-existence on ionic organic pollutants removal over Ca based layered double hydroxide

The effects of co-existing anions (NO₃^- or SO₄^2-) on the removal of sodium dodecylsulfate (SDS), representing anionic organic pollutants, by Ca-based layered double hydroxide (CaAl-LDH-Cl) are investigated to provide fundamental insights on the ionic surfactant removal in the presence of co-existing anions, and facilitate the establishment of a practical and advanced water treatment for environmental remediation. The SO₄^2- system shows higher adsorption capacity (4.43 mmol·g^-1) and larger d-spacing of adsorption resultant (3.4 nm) than the control system with no co-existing anion (3.64 mmol·g^-1, 3.25 nm) and the NO₃^- system (3.82 mmol·g^-1, 3.27 nm). The macroscopic and microscopic analyses reveal that, NO₃^- had a little influence on the SDS removal due to strong electrolysis, while SO₄^2- could significantly promote the SDS removal. Moreover, the reaction mechanism varies under different molar ratios of DS^-/SO₄^2-.

Thermodynamic and crystallographic model for anion uptake by hydrated calcium aluminate (AFm): an example of molybdenum

Amongst all cement phases, hydrated calcium aluminate (AFm) plays a major role in the retention of anionic species. Molybdenum (Mo), whose ⁹³Mo isotope is considered a major steel activation product, will be released mainly under the form of MoO₄²⁻ in a radioactive waste repository. Understanding its fate is of primary importance in a safety analysis of such disposal. This necessitates models that can both predict quantitatively the sorption of Mo by AFm and determine the nature of the sorption process (i.e., reversible adsorption or incorporation). This study investigated the Cl⁻/MoO₄²⁻ exchange processes occurring in an AFm initially containing interlayer Cl in alkaline conditions using flow-through experiments. The evolution of the solid phase was characterized using an electron probe microanalyzer and synchrotron high-energy X-ray scattering. All data, together with their quantitative modeling, coherently indicated that Mo replaced Cl in the AFm interlayer. The structure of the interlayer is described with unprecedented atomic-scale detail based on a combination of real- and reciprocal-space analyses of total X-ray scattering data. In addition, modeling of several independent chemical experiments elucidated that Cl⁻/OH⁻ exchange processes occur together with Cl⁻/MoO₄²⁻ exchange. This competitive effect must be considered when determining the Cl⁻/MoO₄²⁻ selectivity constant.