Total Oxidation of Propane over a Ru/CeO2 Catalyst at Low Temperature

Ce-doped TiO2 supported RuO2 as efficient catalysts for the oxidation of HCl to Cl2

Reducing the cost of RuO2/TiO2 catalysts is still one of the urgent challenges in catalytic HCl oxidation. In the present work, a Ce-doped TiO2 supported RuO2 catalyst with a low Ru loading was developed, showing a high activity in the catalytic oxidation of HCl to Cl2. The results on some extensive characterizations of both Ce-doped TiO2 carriers and their supported RuO2 catalysts show that the doping of Ce into TiO2 can effectively change the lattice parameters of TiO2 to improve the dispersion of the active RuO2 species on the carrier, which facilitates the production of surface Ru species to expose more active sites for boosting the catalytic performance even under some harsh reaction conditions. This work provides some scientific basis and technical support for chlorine recycling.

Effects of surface fluoride modification on TiO2 for the photocatalytic oxidation of toluene

In the present study, we investigated the influence of surface fluorine (F) on TiO2 for the photocatalytic oxidation (PCO) of toluene. TiO2 modified with different F content was prepared and tested. It was found that with the increasing of F content, the toluene conversion rate first increased and then decreased. However, CO2 mineralization efficiency showed the opposite trend. Based on the characterizations, we revealed that F substitutes the surface hydroxyl of TiO2 to form the structure of Ti-F. The presence of the appropriate amount of surface Ti-F on TiO2 greatly enhanced the separation of photogenerated carriers, which facilitated the generation of ·OH and promoted the activity for the PCO of toluene. It was further revealed that the increase of only ·OH promoted the conversion of toluene to ring-containing intermediates, causing the accumulation of intermediates and then conversely inhibited the ·OH generation, which led to the decrease of the CO2 mineralization efficiency. The above results could provide guidance for the rational design of photocatalysts for toluene oxidation.

Robust Ru/Ce@Co Catalyst with an Optimized Support Structure for Propane Oxidation

Short carbon chain alkanes, as typical volatile organic compounds (VOCs), have molecular structural stability and low molecular polarity, leading to an enormous challenge in the catalytic oxidation of propane. Although Ru-based catalysts exhibit a surprisingly high activity for the catalytic oxidation of propane to CO2 and H2O, active RuOx species are partially oxidized and sintered during the oxidation reaction, leading to a decrease in catalytic activity and significantly inhibiting their application in industrial processes. Herein, the Ru/Ce@Co catalyst is synthesized with a specific structure, in which cerium dioxide is dispersed in a thin layer on the surface of Co3O4, and Ru nanoparticles fall preferentially on cerium oxide with high dispersity. Compared with the Ru/CeO2 and Ru/Co3O4 catalysts, the Ru/Ce@Co catalyst demonstrates excellent catalytic activity and stability for the oxidation of propane, even under severe operating conditions, such as recycling reaction, high space velocity, a certain degree of moisture, and high temperature. Benefiting from this particular structure, the Ru/Ce@Co (5:95) catalyst with more Ce3+ species leads to the Ru species being anchored more firmly on the CeO2 surface with a low-valent state and has a strong potential for adsorption and activation of propane and oxygen, which is beneficial for RuOx species with high activity and stability. This work provides a novel strategy for designing high-efficiency Ru-based catalysts for the catalytic combustion of short carbon alkanes.

Highly Reactive Peroxide Species Promoted Soot Oxidation over an Ordered Macroporous Ce0.8Zr0.2O2 Integrated Catalyzed Diesel Particulate Filter

Particulate matter, represented by soot particles, poses a significant global environmental threat, necessitating efficient control technology. Here, we innovatively designed and elaborately fabricated ordered hierarchical macroporous catalysts of Ce0.8Zr0.2O2 (OM CZO) integrated on a catalyzed diesel particulate filter (CDPF) using the self-assembly method. An oxygen-vacancy-enriched ordered macroporous Ce0.8Zr0.2O2 catalyst (VO-OM CZO) integrated CDPF was synthesized by subsequent NaBH4 reduction. The VO-OM CZO integrated CDPF exhibited a markedly enhanced soot oxidation activity compared to OM CZO and powder CZO coated CDPFs (T50: 430 vs 490 and 545 °C, respectively). The well-defined OM structure of the VO-OM CZO catalysts effectively improves the contact efficiency between soot and the catalysts. Meanwhile, oxygen vacancies trigger the formation of a large amount of highly reactive peroxide species (O22-) from molecular oxygen (O2) through electron abstraction from the three adjacent Ce3+ (3Ce3+ + Vö + O2 → 3Ce4+ + O22-), contributing to the efficient soot oxidation. This work demonstrates the fabrication of the ordered macroporous CZO integrated CDPF and reveals the importance of structure and surface engineering in soot oxidation, which sheds light on the design of highly efficient PM capture and removal devices.

Cooperative and Bifunctional Adsorbent-Catalyst Materials for In-situ VOCs Capture-Conversion

Volatile organic compounds (VOCs) are gases that are emitted into the air from products or processes and are major components of air pollution that significantly deteriorate air quality and seriously affect human health. Different types of metals, metal oxides, mixed-metal oxides, polymers, activated carbons, zeolites, metal-organic frameworks (MOFs) and mixed-matrixed materials have been developed and used as adsorbent or catalyst for diversified VOCs detection, removal, and destruction. In this comprehensive review, we first discuss the general classification of VOCs removal materials and processes and outline the historical development of bifunctional and cooperative adsorbent-catalyst materials for the removal of VOCs from air. Subsequently, particular attention is devoted to design of strategies for cooperative adsorbent-catalyst materials, along with detailed discussions on the latest advances on these bifunctional materials, reaction mechanisms, long-term stability, and regeneration for VOCs removal processes. Finally, challenges and future opportunities for the environmental implementation of these bifunctional materials are identified and outlined with the intent of providing insightful guidance on the design and fabrication of more efficient materials and systems for VOCs removal in the future.

Ru-Ce0.7Zr0.3O2-δ as an Anode Catalyst for the Internal Reforming of Dimethyl Ether in Solid Oxide Fuel Cells

The development of direct dimethyl ether (DME) solid oxide fuel cells (SOFCs) has several drawbacks, due to the low catalytic activity and carbon deposition of conventional Ni-zirconia-based anodes. In the present study, the insertion of 2.0 wt.% Ru-Ce0.7Zr0.3O2-δ (ruthenium-zirconium-doped ceria, Ru-CZO) as an anode catalyst layer (ACL) is proposed to be a promising solution. For this purpose, the CZO powder was prepared by the sol-gel synthesis method, and subsequently, nanoparticles of Ru (1.0-2.0 wt.%) were synthesized by the impregnation method and calcination. The catalyst powder was characterized by BET-specific surface area, X-ray diffraction (XRD), field emission scanning electron microscopy with an energy-dispersive spectroscopy detector (FESEM-EDS), and transmission electron microscopy (TEM) techniques. Afterward, the catalytic activity of Ru-CZO catalyst was studied using DME partial oxidation. Finally, button anode-supported SOFCs with Ru-CZO ACL were prepared, depositing Ru-CZO onto the anode support and using an annealing process. The effect of ACL on the electrochemical performance of cells was investigated under a DME and air mixture at 750 °C. The results showed a high dispersion of Ru in the CZO solid solution, which provided a complete DME conversion and high yields of H2 and CO at 750 °C. As a result, 2.0 wt.% Ru-CZO ACL enhanced the cell performance by more than 20% at 750 °C. The post-test analysis of cells with ACL proved a remarkable resistance of Ru-CZO ACL to carbon deposition compared to the reference cell, evidencing the potential application of Ru-CZO as a catalyst as well as an ACL for direct DME SOFCs.

Efficient Photothermal Catalytic Oxidation Enabled by Three-Dimensional Nanochannel Substrates

Photothermal catalysis exhibits promising prospects to overcome the shortcomings of high-energy consumption of traditional thermal catalysis and the low efficiency of photocatalysis. However, there is still a challenge to develop catalysts with outstanding light absorption capability and photothermal conversion efficiency for the degradation of atmospheric pollutants. Herein, we introduced the Co3O4 layer and Pt nanoclusters into the three-dimensional (3D) porous membrane through the atomic layer deposition (ALD) technique, leading to a Pt/Co3O4/AAO monolithic catalyst. The 3D ordered nanochannel structure can significantly enhance the solar absorption capacity through the light-trapping effect. Therefore, the embedded Pt/Co3O4 catalyst can be rapidly heated and the O2 adsorbed on the Pt clusters can be activated to generate sufficient O2- species, exhibiting outstanding activity for the diverse VOCs (toluene, acetone, and formaldehyde) degradation. Optical characterization and simulation calculation confirmed that Pt/Co3O4/AAO exhibited state-of-the-art light absorption and a notable localized surface plasmon resonance (LSPR) effect. In situ diffuse reflectance infrared Fourier transform spectrometry (in situ DRIFTS) studies demonstrated that light irradiation can accelerate the conversion of intermediates during toluene and acetone oxidation, thereby inhibiting byproduct accumulation. Our finding extends the application of AAO's optical properties in photothermal catalytic degradation of air pollutants.

Role of the In-Situ-Formed Surface (Pt-S-O)-Ti Active Structure in SO2-Promoted C3H8 Combustion over a Pt/TiO2 Catalyst

Typically, SO2 unavoidably deactivates catalysts in most heterogeneous catalytic oxidations. However, for Pt-based catalysts, SO2 exhibits an extraordinary boosting effect in propane catalytic oxidation, but the promotive mechanism remains contentious. In this study, an in situ-formed tactful (Pt-S-O)-Ti structure was concluded to be a key factor for Pt/TiO2 catalysts with a substantial SO2 tolerance ability. The experiments and theoretical calculations confirm that the high degree of hybridization and orbital coupling between Pt 5d and S 3p orbitals enable more charge transfer from Pt to S species, thus forming the (Pt-S-O)-Ti structure with the oxygen atom dissociated from the chemisorbed O2 adsorbed on oxygen vacancies. The active oxygen atom in the (Pt-S-O)-Ti active structure is a robust site for C3H8 adsorption, leading to a better C3H8 combustion performance. This work can provide insights into the rational design of chemical bonds for high SO2 tolerance catalysts, thereby improving economic and environmental benefits.

Doping SnO2 with metal ions of varying valence states: discerning the importance of active surface oxygen species vs. acid sites for C3H8 and CO oxidation

To elucidate the valence state effect of doping cations, Li+, Mg2+, Cr3+, Zr4+ and Nb5+ with radii similar to Sn4+ (CN = 6) were chosen to dope tetragonal SnO2. Cr3+, Zr4+ and Nb5+ can enter the SnO2 lattice to produce solid solutions, thus creating more surface defects. However, Li+ and Mg2+ can only stay on the SnO2 surface as nitrates, thus suppressing the surface defects. The rich surface defects facilitate the generation of active O2-/Oδ- and acid sites on the solid solution catalysts, hence improving the reactivity. On the solid solution catalysts active for propane combustion, several reactive intermediates can be formed, but are negligible on those with low activity. It is confirmed that for propane combustion, surface acid sites play a more vital role than active oxygen sites. Nevertheless, for CO oxidation, the active oxygen sites play a more vital role than the acid sites.

The enhancement of benzene total oxidation over RuxCeO2 catalysts at low temperature: The significance of Ru incorporation

Catalytic oxidation is considered to be the most efficient technology for eliminating benzene from waste gas. The challenge is the reduction of the catalytic reaction temperature for the deep oxidation of benzene. Here, highly efficient RuxCeO2 catalysts were utilized to turn the number of surface oxygen vacancies and Ce-O-Ru bonds via a one-step hydrothermal method, resulting in a preferable low-temperature reducibility for the total oxidation of benzene. The T50 of the Ru0.2CeO2 catalyst for benzene oxidation was 135 °C, which was better than that of pristine CeO2 (239 °C) and 0.2Ru/CeO2 (190 °C). The superior performance of Ru0.2CeO2 was attributed to its large surface area (approximately 114.23 m2·g-1), abundant surface oxygen vacancies, and Ce-O-Ru bonds. The incorporation of Ru into the CeO2 lattice could effectively facilitate the destruction of the CeO bond and the facile release of lattice oxygen, inducing the generation of surface oxygen vacancies. Meanwhile, the bridging action of Ce-O-Ru bonds accelerated electron transfer and lattice oxygen transportation, which had a synergistic effect with surface oxygen vacancies to reduce the reaction temperature. The Ru0.2CeO2 catalyst also exhibited high catalytic stability, water tolerance, and impact resistance in terms of benzene abatement. Using in situ infrared spectroscopy, it was demonstrated that the Ru0.2CeO2 catalyst can effectively enhance the accumulation of maleate species, which are key intermediates for benzene ring opening, thereby enhancing the deep oxidation of benzene.

Low-Temperature Propane Activation and Mineralization over a Co3O4 Sub-nanometer Porous Sheet: Atomic-Level Insights

Light alkanes make up a class of widespread volatile organic compounds (VOCs), bringing great environmental hazards and health concerns. However, the low-temperature catalytic destruction of light alkanes is still a great challenge to settle due to their high reaction inertness and weak polarity. Herein, a Co3O4 sub-nanometer porous sheet (Co3O4-SPS) was fabricated and comprehensively compared with its bulk counterparts in the catalytic oxidation of C3H8. Results demonstrated that abundant low-coordinated Co atoms on the Co3O4-SPS surface boost the activation of adsorbed oxygen and enhance the catalytic activity. Moreover, Co3O4-SPS has better surface metal properties, which is beneficial to electron transfer between the catalyst surface and the reactant molecules, promoting the interaction between C3H8 molecules and dissociated O atoms and facilitating the activation of C-H bonds. Due to these, Co3O4-SPS harvests a prominent performance for C3H8 destruction, 100% of which decomposed at 165 °C (apparent activation energy of 49.4 kJ mol-1), much better than the bulk Co3O4 (450 °C and 126.9 kJ mol-1) and typical noble metal catalysts. Moreover, Co3O4-SPS also has excellent thermal stability and water resistance. This study deepens the atomic-level insights into the catalytic capacity of Co3O4-SPS in light alkane purification and provides references for designing efficacious catalysts for thermocatalytic oxidation reactions.

Highly active Ru/TiO2 nanostructures for total catalytic oxidation of propane

Ruthenium is a robust catalyst for a variety of applications in environmental heterogeneous catalysis. The catalytic performance of Ru/TiO2 materials, synthesized by using the deposition precipitation with urea method, was assessed in the catalytic oxidation of C3H8, varying the ruthenium loading. The highest catalytic reactivity was obtained for a Ru loading of 2 wt. % in comparison with the 1, 1.5, 3, and 4 wt. % Ru catalysts. The physicochemical properties of the synthesized materials were investigated by XRD, N2 adsorption, TEM, FT-IR pyridine, H2-TPR, and XPS. The size of ruthenium particles was found to be greatly dependent on the pretreatment gas (air or hydrogen) and the catalytic activity was enhanced by the small-size ruthenium metal nanoparticles, leading to changes in the reduction degree of ruthenium, which also increased the Brönsted and Lewis acidity. Metal to support charge transfer enhanced the reactant adsorption sites while oxygen vacancies on the interface enabled the dissociation of O2 molecules as revealed through DFT calculations. The outstanding catalytic activity of the 2Ru/TiO2 catalysts allowed to convert C3H8 into CO2 at reaction temperatures of about 100 °C. This high activity may be attributed to the metal/support interaction between Ru and TiO2, which promoted the reducibility of Ti4+/Ti3+ and Ru4+/Ru0 species, and to the fast migration of TiO2 lattice oxygen in the catalyst. Furthermore, the Ru/TiO2 catalyst exhibited high stability and reusability for 30 h under reaction conditions, using a GHSV of 45,000 h-1. The underlying alkane-metal interactions were explored theoretically in order to explain the C-H bond activation in propane by the catalyst.

Preformed Pt Nanoparticles Supported on Nanoshaped CeO2 for Total Propane Oxidation

Pt-based catalysts have been widely used for the removal of short-chain volatile organic compounds (VOCs), such as propane. In this study, we synthesized Pt nanoparticles with a size of ca. 2.4 nm and loaded them on various fine-shaped CeO2 with different facets to investigate the effect of CeO2 morphology on the complete oxidation of propane. The Pt/CeO2-o catalyst with {111} facets exhibited superior catalytic activity compared to the Pt/CeO2-r catalyst with {110} and {100} facets. Specifically, the turnover frequency (TOF) value of Pt/CeO2-o was 1.8 times higher than that of Pt/CeO2-r. Moreover, Pt/CeO2-o showed outstanding long-term stability during 50 h. X-ray photoelectron spectroscopy (XPS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) revealed that the excellent performance of Pt/CeO2-o is due to the prevalence of metallic Pt species, which promotes C-C bond cleavage and facilitates the rapid removal of surface formate species. In contrast, a stronger metal-support interaction in Pt/CeO2-r leads to easier oxidation of Pt species and the accumulation of intermediates, which is detrimental to the catalytic activity. Our work provides insight into the oxidation of propane on different nanoshaped Pt/CeO2 catalysts.

Surface Lattice-Embedded Pt Single-Atom Catalyst on Ceria-Zirconia with Superior Catalytic Performance for Propane Oxidation

Tuning the metal-support interaction and coordination environment of single-atom catalysts can help achieve satisfactory catalytic performance for targeted reactions. Herein, via the facile control of calcination temperatures for Pt catalysts on pre-stabilized Ce0.9Zr0.1O2 (CZO) support, Pt single atoms (Pt1) with different strengths of Pt-CeO2 interaction and coordination environment were successfully constructed. With the increase in calcination temperature from 350 to 750 °C, a stronger Pt-CeO2 interaction and higher Pt-O-Ce coordination number were achieved due to the reaction between PtOx and surface Ce3+ species as well as the migration of Pt1 into the surface lattice of CZO. The Pt/CZO catalyst calcined at 750 °C (Pt/CZO-750) exhibited a surprisingly higher C3H8 oxidation activity than that calcined at 550 °C (Pt/CZO-550). Through systematic characterizations and reaction mechanism study, it was revealed that the higher concentration of surface Ce3+ species/oxygen vacancies and the stronger Pt-CeO2 interaction on Pt/CZO-750 could better facilitate the activation of oxygen to oxidize C3H8 into reactive carbonate/carboxyl species and further promote the transformation of these intermediates into gaseous CO2. The Pt/CZO-750 catalyst can be a potential candidate for the catalytic removal of hydrocarbons from vehicle exhaust.

Boosting Polyethylene Hydrogenolysis Performance of Ru-CeO2 Catalysts by Finely Regulating the Ru Sizes

Hydrogenolysis is an effective method for converting polyolefins into high-value chemicals. For the supported catalysts commonly used, the size of active metals is of great importance. In this study, it is discovered that the activity of CeO2 -supported Ru single atom, nanocluster, and nanoparticle catalysts shows a volcanic trend in low-density polyethylene (LDPE) hydrogenolysis. Compared with CeO2 supported Ru single atoms and nanoparticles, CeO2 -supported Ru nanoclusters possess the highest conversion efficiency, as well as the best selectivity toward liquid alkanes. Through comprehensive investigations, the metal-support interactions (MSI) and hydrogen spillover effect are revealed as the two key factors in the reaction. On the one hand, the MSI is strongly related to the Ru surface states and the more electronegative Ru centers are beneficial to the activation of CH and CC bonds. On the other hand, the hydrogen spillover capability directly affects the affinity of catalysts and active H atoms, and increasing this affinity is advantageous to the hydrogenation of alkane species. Decreasing the Ru sizes can promote the MSI, but it can also reduce the hydrogen spillover effect. Therefore, only when the two effects achieve a balance, as is the case in CeO2 -supported Ru nanoclusters, can the hydrogenolysis activity be promoted to the optimal value.

Technological solutions for NOx, SOx, and VOC abatement: recent breakthroughs and future directions

NOx, SOx, and carbonaceous volatile organic compounds (VOCs) are extremely harmful to the environment, and their concentrations must be within the limits prescribed by the region-specific pollution control boards. Thus, NOx, SOx, and VOC abatement is essential to safeguard the environment. Considering the importance of NOx, SOx, and VOC abatement, the discussion on selective catalytic reduction, oxidation, redox methods, and adsorption using noble metal and non-noble metal-based catalytic approaches were elaborated. This article covers different thermal treatment techniques, category of materials as catalysts, and its structure-property insights along with the advanced oxidation processes and adsorption. The defect engineered catalysts with lattice oxygen vacancies, bi- and tri-metallic noble metal catalysts and non-noble metal catalysts, modified metal organic frameworks, mixed-metal oxide supports, and their mechanisms have been thoroughly reviewed. The main hurdles and potential achievements in developing novel simultaneous NOx, SOx, and VOC removal technologies are critically discussed to envisage the future directions. This review highlights the removal of NOx, SOx, and VOC through material selection, properties, and mechanisms to further improve the existing abatement methods in an efficient way.

Catalytic Oxidation of Acetone on SmMn2O5: Effect of Acid Etching and Loading Treatment

The key of catalytic oxidation technology is to develop a stable catalyst with high activity. It is still a serious challenge to achieve high conversion efficiency of acetone with an integral catalyst at low temperature. In this study, the SmMn₂O₅ catalyst after acid etching was used as the support, and the manganese mullite composite catalyst was prepared by loading Ag and CeO₂ nanoparticles on its surface. By means of SEM, TEM, XRD, N₂-BET, XPS, EPR, H₂-TPR, O₂-TPD, NH₃-TPD, DRIFT, and other characterization methods, the related factors and mechanism analysis of acetone degradation activity of the composite catalyst were discussed. Among them, the CeO₂-SmMn₂O₅-H catalyst has the best catalytic activity at 123 and 185 °C for T₅₀ and T₁₀₀, respectively, and shows excellent water and thermal resistance and stability. In essence, the surface and lattice defects of highly exposed Mn sites were formed by acid etching, and the dispersibility of Ag and CeO₂ nanoparticles was optimized. Highly dispersed Ag and CeO₂ nanoparticles have a highly synergistic effect with the support SmMn₂O₅, and the reactive oxygen species provided by CeO₂ and the electron transfer brought by Ag further promote the decomposition of acetone on the carrier SMO-H. In the field of catalytic degradation of acetone, a new catalyst modification method of high-quality active noble metals and transition metal oxides supported by acid-etched SmMn₂O₅ has been developed.

Catalytic Decomposition Mechanism of PH3 on 3DCuO/C and High Value Utilization of Deactivated Catalysts

With the widespread application of lithium iron phosphate batteries, the production capacity of the yellow phosphorus industry has increased sharply, and the treatment of the highly toxic by-product PH₃ is facing severe challenges. In this study, a 3D copper-based catalyst (3DCuO/C) that can efficiently decompose PH₃ at low temperatures and low oxygen concentrations is synthesized. The PH₃ capacity is up to 181.41 mg g^-1 , which is superior to that previously reported in the literature. Further studies indicated that the special 3D structure of 3DCuO/C induces oxygen vacancies on the surface of CuO, which is beneficial to the activation of O₂ , and then promotes the adsorption and dissociation of PH₃ . The doping of P after dissociation determines the formation of Cu-P, and the eventual conversion to Cu₃ P leads to the deactivation of CuO active sites. More strikingly, due to the appearance of Cu₃ P, the deactivated De-3DCuO/C (Cu₃ P/C) exhibited significant activity in the photocatalytic degradation of rhodamine B and photocatalytic oxidation of Hg⁰ (gas) and can also be a candidate as an anode material for Li batteries after modification, which will provide a more thorough and economical treatment scheme for deactivated catalysts.

Catalytic oxidation mechanism of AsH3 over CuO@SiO2 core-shell catalysts via experimental and theoretical studies

In this study, CuO@SiO₂ core-shell catalysts were successfully synthesized and applied to efficiently remove hazardous gaseous pollutant arsine (AsH₃) by catalytic oxidation under low-temperature and low-oxygen conditions for the first time. In typical experiments, the CuO@SiO₂ catalysts showed excellent AsH₃ removal activity and stability under low-temperature and low-oxygen conditions. The duration of the AsH₃ conversion rate above 90 % for the CuO@SiO₂ catalysts was 39 h, which was markedly higher than that of other catalysts previously reported in the literature. The considerable catalytic activity and stability were attributed to the protection and confinement effects of the SiO₂ shell, which resulted in highly dispersed CuO nanoparticles. Meanwhile, the strong interaction between the CuO core and SiO₂ shell further facilitated the formation of active species such as coordinatively unsaturated Cu²⁺ and chemisorbed oxygen. The accumulation of oxidation products (As₂O₃ and As₂O₅) on the interface between the CuO core and SiO₂ shell and the pore channels of the SiO₂ shell is the main cause of catalysts deactivation. Furthermore, through combined density functional theory (DFT) calculations and characterization methods, a reaction pathway including gradual dehydrogenation (AsH₃*→AsH₂*→AsH*→As*) and gradual oxidation (2As*→As*+AsO*→2AsO*→As₂O₃) for the catalytic oxidation of AsH₃ on CuO (111) surface was constructed to clarify the detailed reaction mechanism. The CuO@SiO₂ core-shell catalysts applied in this study could provide a powerful method for developing AsH₃ catalysts from multiple know AsH₃ removal systems.

Highly Efficient Oxidation of Propane at Low Temperature over a Pt-Based Catalyst by Optimization Support

Pt-based catalysts have attracted widespread attention in environmental protection applications, especially in the catalytic destruction of light alkane pollutants. However, developing a satisfying platinum catalyst with high activity, excellent water-resistance, and practical suitability for hydrocarbon combustion at low temperature is challenging. In this study, the Pt catalyst supported on the selected Nb₂O₅ oxide exhibited an efficient catalytic activity in propane oxidation and exceeded that of most catalysts reported in the literature. More importantly, the Pt/Nb₂O₅ catalyst maintained excellent activity and durability even after high-temperature aging at 700 °C and under harsh working conditions, such as a certain degree of moisture, high space velocity, and composite pollutants. The excellent performance of the Pt/Nb₂O₅ catalyst was attributed to the abundant metallic Pt species stabilized on the surface of Nb₂O₅, which prompted the C-H bond dissociation ability as the rate-determining step. Furthermore, propane was initially activated via oxidehydrogenation and followed the acrylate species path as a more efficient propane oxidation path on the Pt/Nb₂O₅ surface. Overall, Pt/Nb₂O₅ can be considered a promising catalyst for the catalytic oxidation of alkanes from industrial sources and could provide inspiration for designing superb catalysts for the oxidation of light alkanes.

Vinyl chloride catalytic combustion on Pt/CeO2: Tuning Pt chemical state to promote Cl removing

Supported Pt catalysts usually produce chlorinated byproducts during chlorinated volatile organic compounds (CVOCs) combustion, the removal of formed surface chlorine species is the key to improve the activity, selectivity and stability. In this paper, the Pt chemical state is adjusted by the interaction between Pt and CeO₂ through controlling the morphology of CeO₂, which further affects the catalytic performance of VC combustion. For Pt/CeO₂-octahedron, the weak interaction between Pt and CeO₂ results in the formation of PtO₂, facilities VC adsorption and C-Cl bonds cleavage and becomes a key active site to accommodate the dissociated Cl species. While the strong interaction leads to the formation of Pt_xCe_1-xO_2-σ solid solution on Pt/CeO₂-rod has relative lower ability in Cl species removal compared with PtO₂. Density functional theory (DFT) calculations also confirms that the introduced Pt species reduces the concentration of Cl species on the surface as well as the chlorinated-byproducts. Hence, Pt/CeO₂-octahedron outperformed Pt/CeO₂-rod and Pt/CeO₂-cube with 90% VC conversion at 280 °C. Furthermore, under the same VC conversion (90%), the concentration of chlorinated byproducts on Pt/CeO₂-octahedron was only 4% than that of Pt/CeO₂-rod.

Elucidating the role of confinement and shielding effect over zeolite enveloped Ru catalysts for propane low temperature degradation

Volatile organic compounds (VOCs) are the main precursor for ozone formation and hazardous to human health. Light alkane as one of the typical VOCs is difficult to degrade to CO₂ and H₂O by catalytic degradation method due to its strong C-H bond. Herein, a series of ultrafine Ru nanoclusters (<0.95 nm) enveloped in silicalite-1 (S-1) zeolite catalysts were designed and prepared by a simple one-pot method and applied for catalytic degradation of propane. The results demonstrate that the enveloped Ru₁@S-1 catalyst has excellent propane degradation performance. Its T₉₅ is as low as 294 °C with moisture, and the turnover frequency (TOF) value is up to 5.07 × 10^-3 s^-1, evidently higher than that of the comparison supported catalyst (Ru₁/S-1). Importantly, Ru₁@S-1 exhibits superior thermal stability, water resistance and recyclability, which should be attributed to the confinement and shielding effect of the S-1 shell. The in-situ DRIFTS result reveals that the propane degradation over Ru₁@S-1 follows the Mars-van-Krevelen (MvK) mechanism, where the hydroxy from the framework of zeolite can provide the active oxygen species. Our work provides a new candidate and guideline for an efficient and stable catalyst for the low-temperature degradation of the light alkane VOCs.

Unraveling the Active Vanadium Sites and Adsorbate Dynamics in VOx/CeO2 Oxidation Catalysts Using Transient IR Spectroscopy

The oxidative dehydrogenation (ODH) of propane over supported vanadia catalysts is an attractive route toward propene (propylene) with the potential of industrial application and has been extensively studied over decades. Despite numerous mechanistic studies, the active vanadyl site of the reaction has not been elucidated. In this work, we unravel the ODH reaction mechanism, including the nuclearity-dependent vanadyl and surface dynamics, over ceria-supported vanadia (VO_x/CeO₂) catalysts by applying (isotopic) modulation excitation IR spectroscopy supported by operando Raman and UV-vis spectroscopies. Based on our loading-dependent analysis, we were able to identify two different mechanisms leading to propylene, which are characterized by isopropyl- and acrylate-like intermediates. The modulation excitation IR approach also allows for the determination of the time evolution of the vanadia, hydroxyl, and adsorbate dynamics, underlining the intimate interplay between the surface vanadia species and the ceria support. Our results highlight the potential of transient IR spectroscopy to provide a detailed understanding of reaction mechanisms in oxidation catalysis and the dynamics of surface catalytic processes in general.

Combining bi-functional Pt/USY and electromagnetic induction for rapid in-situ adsorption-combustion cycling of gaseous organic pollutant

By exploiting the superior adsorption capacity of ultra-stable Y-type zeolite (USY) and accurate input of energy by electromagnetic induction field (EMIF) technique, we successfully designed a highly energy-efficient system to eliminate gaseous toluene a common air pollutant. Pristine USY as adsorbent enriches gaseous toluene by a factor of fifteen, via room-temperature adsorption and then EMIF-driven thermal desorption. This operation model involving intermittent heating and mass transfer saves a lot of energy. Especially during temperature rising, 98.9% electric energy can be saved by the EMIF heating in comparison with conventional furnace approaches. In the bi-functional "adsorption-catalytic oxidation" 1Pt/USY, the concentrated toluene undergoes direct oxidation into CO₂ rather than desorption when the EMIF heating starts, so one-step enrichment and mineralization are realized. In addition, the developed bi-functional system operates between adsorption and catalytic decomposition flexibly, which makes it ideal for cleaning VOCs emitted from intermittent sources.

DNA-Assisted Creation of a Library of Ultrasmall Multimetal/Metal Oxide Nanoparticles Confined in Silica

Supported ultrasmall metal/metal oxide nanoparticles (UMNPs) with sizes in the range of 1-5 nm exhibit unique properties in sensing, catalysis, biomedicine, etc. However, the metal-support and metal-metal precursor interactions were not as well controlled to stabilize the metal nanoparticles on/in the supports. Herein, DNA is chosen as a template and a ligand for the silica-supported UMNPs, taking full use of its binding ability to metal ions via either electrostatic or coordination interactions. UMNPs thus are highly dispersed in silica via self-assembly of DNA and DNA-metal ion interactions with the assistance of a co-structural directing agent (CSDA). A large number of metal ions are easily retained in the mesostructured DNA-silica materials, and their growth is controlled by the channels after calcination. Based on this directing concept, a material library, consisting of 50 mono- and 54 bicomponent UMNPs confined within silica and with narrow size distribution, is created. Theoretical calculation proves the indispensability of DNA with combination of several organics in the synthesis of ultrasmall metal nanoparticles. The Pt-silica and Pt/Ni-silica chosen from the library exhibit good catalytic performance for toluene combustion. This generalizable and straightforward synthesis strategy is expected to widen the corresponding applications of supported UMNPs.

Promoting effect of Ru-doped Mn/TiO2 catalysts for catalytic oxidation of chlorobenzene

Mn/TiO2 catalysts were synthesized using deposition-precipitation method. Ru-doped Mn/TiO2 catalysts were prepared by incipient-wetness impregnation method. To investigate the effect of Ru and Mn species, the catalytic performances of Mn/TiO2...

Si-doped Al2O3 nanosheet supported Pd for catalytic combustion of propane: effects of Si doping on morphology, thermal stability, and water resistance

Catalytic combustion of propane as typical light alkanes was important for the purification of industrial VOCs and automobile hydrocarbon emissions. Si-doped Al₂O₃ nanosheet was synthesized by a hydrothermal method, and effects of Si content on the morphology and thermal stability of Al₂O₃ were investigated. The doping of SiO₂ could tune the thickness of Al₂O₃ nanosheets and significantly improve its thermal stability, the θ phase was still maintained, and the specific surface area was as high as 56.3 m² g^-1 after calcination at 1200 °C. And then the Si-doped Al₂O₃ nanosheets were used as support of Pd catalysts (Pd/Si-Al₂O₃ nanosheets) for catalytic combustion of propane, especially Pd/3.6Si-Al₂O₃ nanosheets, which presented high activity, stability, and resistance to sintering and H₂O due to the promotion of Si on the thermal stability of Al₂O₃ and the stabilization (dispersion, isolation, and strong interaction) of PdO_x species.

Significant Improvement of Catalytic Performance for Chlorinated Volatile Organic Compound Oxidation over RuOx Supported on Acid-Etched Co3O4

Ru catalysts have attracted increasing attention in catalytic oxidation of chlorinated volatile organic compounds (CVOCs). However, the development of Ru catalysts with high activity and thermal stability for CVOC oxidation still poses significant challenges due to their restrictive relationship. Herein, a strategy for constructing surface defects on Co₃O₄ support by acid etching was utilized to strengthen the interaction between active RuO_x species and the Co₃O₄ support. Consequently, both the dispersity and thermal stability of RuO_x species were significantly improved, achieving both high activity and stability of Ru catalysts for CVOC oxidation. The optimized Ru catalyst on the HF-etched Co₃O₄ support (Ru/Co₃O₄-F) achieved complete oxidation of vinyl chloride at 260 °C under 30 000 mL·g^-1·h^-1, which was lower than 300 °C for the Ru catalyst on the original Co₃O₄ (Ru/Co₃O₄). More importantly, the Ru species on the Ru/Co₃O₄-F catalyst were hardly lost after calcination at 500-700 °C and even reacting at 650 °C for 120 h. On this basis, the polychlorinated byproducts over the Ru/Co₃O₄-F catalyst were almost completely effaced by phosphate modification on the catalyst surface. These findings show that the method combining acid etching of the support and phosphate modification provides a strategy for the advancement of catalyst design for CVOC oxidation.

Thermal Stability of Ru–Re NPs in H2 and O2 Atmosphere and Their Activity in VOCs Oxidation: Effect of Ru Precursor

The thermal stability of Ru–Re NPs on γ-alumina support was studied in hydrogen at 800 °C and in air at 250–400 °C. The catalysts were synthesized using Cl-free and Cl-containing Ru precursors and NH4ReO4. Very high sintering resistance of Ru–Re NPs was found in hydrogen atmosphere and independent of Ru precursors and Re loading, the size of them was below 2–3 nm. In air, metal segregation occurred at 250 °C, leading to formation of RuO2 and highly dispersed ReOx species. Ruthenium agglomeration was hindered at higher Re loading and in presence of residual Cl species. Propane oxidation rate was higher with the Ru(N)–Re catalysts than with Ru(N) and that containing Cl species. The Ru(N)–Re (3:1) catalyst exhibited the highest activity and the lowest activation energy (91.6 kJ mol−1) what is in contrast to Ru(Cl)–Re (3:1) which had the lowest activity and the highest activation energy (119.3 kJ mol−1). Thus, the synergy effect was not observed in Cl-containing catalysts.

Graphic Abstract