Highly Efficient Utilization of Nano-Fe(0) Embedded in Mesoporous Carbon for Activation of Peroxydisulfate

Nanoconfined Fe(II) releaser for long-term arsenic immobilization and its sustainability assessment

Ferrous (Fe(II))-based oxygen activation for pollutant abatements in soil and groundwater has attracted great attention, while the low utilization and insufficient longevity of electron donors are the primary challenges to hinder its practical applications. Herein, we propose a nanoconfined Fe(II) releasing strategy that enables stable long-term electron donation for oxygen activation and efficient arsenic (As) immobilization under oxic conditions, by encapsulating zero-valent iron in biomass-derived carbon shell (ZVI@porous carbon composites; ZVI@PC). This strategy effectively enhances the generation of reactive oxygen species, enabling efficient oxidation and subsequent immobilization of As(III) in soils. Importantly, this Fe(II) releaser exhibits strong anti-interference capability against complex soil matrices, and the accompanying generation of Fe(III) enables As immobilization in soils, effectively lowering soil As bioavailability. Soil fixed-bed column experiments demonstrate a 79.5 % reduction of the total As in effluent with a simulated rainfall input for 10 years, indicating the excellent long-term stability for As immobilization in soil. Life cycle assessment results show that this Fe(II) releaser can substantially mitigate the negative environmental impacts. This work offers new insights into developing green and sustainable technologies for environmental remediation.

Sustainable efficient utilization of magnetic porous biochar for adsorption of orange G and tetracycline: Inherent roles of adsorption and mechanisms

Iron-doped biochar has been widely used as an adsorbent to remove contaminants due to the high adsorption performance, but it still suffers from complicated preparation methods, unstable iron loading, unsatisfactory specific surface area, and uneven distribution of active sites. Here, a novel magnetic porous biochar (FeCS800) with nanostructure on surface was synthesized by one-pot pyrolysis method of corn straw with K2FeO4, and used in orange G (OG) and tetracycline (TC) adsorption. FeCS800 exhibited outstanding adsorption capacities for OG and TC after K2FeO4 activation and the adsorption data were fitted satisfactorily to Langmuir isotherm and Pseudo-second-order kinetic model. The maximum adsorption capacities of FeCS800 for OG and TC were around 303.03 mg/g and 322.58 mg/g, respectively, at 25 °C and pH 7.0, which were 16.27 and 24.61 times higher than that before modification. Thermodynamic studies showed that the adsorption of OG/TC by FeCS800 were thermodynamically favorable and highly spontaneous. And the adsorption capacity of OG and TC by FeCS800 remained 77% and 81% after 5 cycles, respectively, indicating that FeCS800 had good stability. The outstanding adsorption properties and remarkable reusability of FeCS800 show its great potential to be an economic and environmental adsorbent in contaminants removal.

Controllable chemical redox reactions to couple microbial degradation for organic contaminated sites remediation: A review

Global environmental concern over organic contaminated sites has been progressively conspicuous during the process of urbanization and industrial restructuring. While traditional physical or chemical remediation technologies may significantly destroy the soil structure and function, coupling moderate chemical degradation with microbial remediation becomes a potential way for the green, economic, and efficient remediation of contaminated sites. Hence, this work systematically elucidates why and how to couple chemical technology with microbial remediation, mainly focused on the controllable redox reactions of organic contaminants. The rational design of materials structure, selective generation of reactive oxygen species, and estimation of degradation pathway are described for chemical oxidation. Meanwhile, current progress on efficient and selective reductions of organic contaminants (i.e., dechlorination, defluorination, -NO2 reduction) is introduced. Combined with the microbial remediation of contaminated sites, several consideration factors of how to couple chemical and microbial remediation are proposed based on both fundamental and practical points of view. This review will advance the understanding and development of chemical-microbial coupled remediation for organic contaminated sites.

Synthesis of stabilized zero-valent iron particles and role investigation of humic acid-Fex+ shell in Fenton-like reactions and surface stability control

Herein, a novel humic acid-Fex+ complex-coated ZVI (HA-Fex+@ZVI) was synthesized and used to activate peroxydisulfate (PDS) for phenol degradation. The HA-Fex+ shell selectively reacted with PDS rather than O2, leading to the formation of modified ZVI with excellent surface stability in storage and ultraefficient PDS activation in advanced oxidation processes (AOPs). As a result, the phenol degradation and PDS activation efficiencies of HA-Fex+@ZVI/PDS were ∼14.4 and ∼1.8 times higher than those of ZVI/PDS, respectively. Mechanistic explorations revealed that the replacement of the HA-Fex+ shell relative to the original passivation layer of ZVI greatly changed the SO4•- generation pathway from a heterogeneous process to a homogeneous process, resulting from the slow exposure of Fe0 (generating dissolved Fe2+) and the depolymerized HA (enhancing the Fe3+/Fe2+ cycle). Based on experimental analysis and density functional theory (DFT) calculations, the Fe3+ in HA-Fex+ could be reduced to Fe2+ by PDS, resulting in the disintegration of the HA-Fex+ shell and exposure of Fe0 core active sites. Furthermore, compared to similar catalysts synthesized with commercial HA and traditional chemicals, HA-Fex+@ZVI synthesized with multiple waste biomasses exhibited better performance. This research provides valuable insights for designing ZVI-based catalysts with excellent storage stability and ultraefficient PDS catalytic activity for AOPs.

Decolouration of azo dyes by radicals generated from K2S2O8 automatically in homogeneous aqueous solutions

In this work, at 15 °C and 25 °C, authors study the decolouration reactions (or degradation reactions or oxidation reactions) of 0.10 mM azo dyes (methyl orange and congo red) by (1) K2S2O8 and (2) Co2+/K2S2O8, expounding the roles of K2S2O8 and Co2+: K2S2O8 can oxidize azo dyes automatically in water by radicals; Co2+ has catalysis for oxidation of K2S2O8, whether Co2+ is from CoSO4 or Co(NO3)2, CoCl2, CoAc2. The decolouration degree of azo dyes in all systems quickens with the increase of the initial concentration of K2S2O8 and the reaction temperature. In the presence and absence of Co2+, comparative experiments are done between the oxidation of K2S2O8 and oxone, K2S2O8 shows weaker oxidation than oxone. The decolouration reaction of methyl orange (MO) in the system of (0.10 mM MO + 2.00 mM K2S2O8) accords with the second order reaction, the reaction rate constants are 4.789 M-1 min-1 at 15 °C and 5.894 M-1 min-1 at 25 °C respectively, the activation energy Ea is 14813 J/mol, and Arrhenius equation is k = 2.328 exp[-14813/(RT)].

Emerging isolation and degradation technology of microplastics and nanoplastics in the environment

Microplastics (MPs, less than 5 mm in size) are widely distributed in surroundings in various forms and ways, and threaten ecosystems security and human health. Its environmental behavior as pollutants carrier and the after-effects exposed to MPs has been extensively exploited; whereas, current knowledge on technologies for the separation and degradation of MPs is relatively limited. It is essential to isolate MPs from surroundings and/or degrade to safe levels. This in-depth review details the origin and distribution of MPs. Provides a comprehensive summary of currently available MPs separation and degradation technologies, and discusses the mechanisms, challenges, and application prospects of these technologies. Comparison of the contribution of various separation methods to the separation of NPs and MPs. Furthermore, the latest research trends and direction in bio-degradation technology are outlooked.

Internal Electric Field-Modulated Charge Migration Behavior in MoS2 /MIL-53(Fe) S-Scheme Heterojunction for Boosting Visible-Light-Driven Photocatalytic Chlorinated Antibiotics Degradation

Inadequate photo-generated charge separation, migration, and utilization efficiency limit the photocatalytic efficiency. Herein, a MoS2 /MIL-53(Fe) photocatalyst/activator with the S-scheme heterojunction structure is designed and the charge migration behavior is modulated by the internal electric field (IEF). The IEF intensity is enhanced to 40 mV by modulating band bending potential and the depletion layer length of MoS2 . The photo-generated electron migration process is boosted by constructing the electron migration bridge (Fe-O-S) and modulating the IEF as the driving force, confirmed by the density functional theory calculation. Compared with the pristine materials, the photocurrent density of MoS2 /MIL-53(Fe) is significantly enhanced 27.5 times. Contributed by the visible-light-driven cooperative catalytic degradation and the high-efficiency direct photo-generated electron reduction dichlorination process, satisfactory chlorinated antibiotics removal and detoxification performances are achieved. This study opens up new insights into the application of heterojunctions in photocatalytic activation of PDS in environmental remediation.

Coalescence of As(II) with •OH: The pivot for co-processing of As(III) and butyl xanthate

Although water metalloid pollution is widely studied, the effect of the combined pollution of organic matter and metalloids in mining water and, especially, the possible interaction mechanisms between metalloids and flotation reagents, are both poorly understood. Existence of mixed pollution of metalloids and organic compounds tends to cause more serious harm to natural organisms. In this study, a synergistic removal of arsenite (As(III)) and butyl xanthate (Bx) in an advanced oxidation system was reported using biochar-based catalyst loaded with nano-zero-valent iron from an inexpensive iron source (iron slag) to activate peroxodisulfate. The removal efficiencies were improved by 30 % in the co-existence of As(III) and Bx compared to those of the single pollutant. The theoretical calculations, especially frontier molecular orbital theory, revealed the generation of [AsO₂-OH]^•- by the combination of As(II) with •OH. This [AsO₂-OH]^•- participated in the oxidative degradation of Bx with high activity and combined with the sulfur falling off Bx after the reaction to form a novel Fe-As-S complex as indicated by X-ray absorption +fine structure analysis. Overall, this study reports the generation of low-valent arsenic active substances of [AsO₂-OH]^•- and their effect on the removal of organic pollution containing S atoms in advanced oxidation systems under typical mining water conditions with the coexistence of As(III) and expands the understanding and application of traditional free radicals.

Remediation of polybrominated diphenyl ethers contaminated soil in the e-waste disposal site by ball milling modified zero valent iron activated persulfate

Hydrophobic organic compounds (HOCs) in e-waste disposal sites are difficult to remove effectively. There is little reported about zero valent iron (ZVI) coupled with persulfate (PS) to achieve the removal of decabromodiphenyl ether (BDE209) from soil. In this work, we have prepared the flake submicron zero valent iron by ball milling with boric acid (B-mZVI^bm) at a low cost. Sacrifice experiments results showed that 56.6% of BDE209 was removed in 72 h with PS/B-mZVI^bm, which was 2.12 times than that of micron zero valent iron (mZVI). The morphology, crystal form, atomic valence, composition, and functional group of B-mZVI^bm were determined by SEM, XRD, XPS, and FTIR, and the results indicated that the oxide layer on the surface of mZVI is replaced by borides. The results of EPR indicated that hydroxyl radical and sulfate radical played the dominant role in the degradation of BDE209. The degradation products of BDE209 were determined by gas chromatography-mass spectrometry (GC-MS), accordingly, the possible degradation pathway was further proposed. The research suggested that ball milling with mZVI and boric acid is a low-cost means of preparing highly active zero valent iron materials. And the mZVI^bm has promising applications in improving the activation efficiency of PS and enhancing the removal of the contaminant.

One-step self-assembly of Fe-biochar composite for enhanced persulfate activation to phenol degradation: Different active sites-induced radical/non-radical mechanism

Persulfate (PS) activation by nanoscale zerovalent iron (nZVI) is promising for water purification, while is limited due to its easy agglomeration and oxidation. Herein, nZVI encapsuled in carbon matrix shell was synthesized via one-step carbothermal reduction. The core-shell structure effectively inhibited oxidation and agglomeration of nZVI core, and graphitized porous structures facilitated phenol binding with maximal adsorption capacity of 117.10 mg/g achieved by nZVI_0.6-BC₈₀₀. Both reactive oxygen species (SO₄^•-, O•H, O₂^•- and ¹O₂) and electron transfer process resulted in phenol decomposition. Owing to diversified active sites, the nZVI_0.6-BC₈₀₀/PS system could completely degrade phenol degradation within short time, and exhibited great adaptation to extensive pH range (3.0-9.0) and coexisting substances. Additionally, the nZVI_0.6-BC₈₀₀/PS system could maintain over 85% removal of phenol after three recycles or 50 days of storage, and was highly-efficient to different water environments, thus proposing rational design of iron-carbon catalyst with potential in water treatment.

Metal-carbon hybrid materials induced persulfate activation: Application, mechanism, and tunable reaction pathways

Proper wastewater treatment has always been the focus of human society, and many researchers have been working to find efficient and stable wastewater treatment technologies. Persulfate-based advanced oxidation processes (PS-AOPs) mainly rely on persulfate activation to form reactive species for pollutants degradation and are considered to be one of the most effective wastewater treatment technologies. Recently, metal-carbon hybrid materials have been diffusely used for PS activation because of their high stability, abundant active sites, and easy applicability. Metal-carbon hybrid materials can successfully overcome the shortcomings of onefold metal catalysts and carbon catalysts by combing the complementary advantages of the two components. This article reviews recent studies about metal-carbon hybrid materials-mediated PS-AOPs for wastewater decontamination. The interactions of metal and carbon materials, as well as the active sites of metal-carbon hybrid materials, are introduced first. Then, the application and mechanism of metal-carbon hybrid materials-mediated PS activation are presented in detail. Lastly, the modulation methods of metal-carbon hybrid materials and their tunable reaction pathways were discussed. The prospect of future development directions and challenges is proposed to facilitate metal-carbon hybrid materials-mediated PS-AOPs to take a step further for practical application.

Calcination-controlled performance optimization of iron-vanadium bimetallic oxide nanoparticles for synergistic tumor therapy

Calcination has been widely demonstrated as a favorable protocol for producing various inorganic nanomaterials for tumor therapy. However, little attention has been paid to its effect on the biotherapeutic efficacy of inorganic nanomaterials. Herein, we compare the effects of different calcination atmospheres on the therapeutic efficacy of Fe-V-O (FVO) nanomaterials. We find that compared with FVO nanomaterials synthesized by calcination in air, those prepared by argon calcination have a lower metallic valence state and a higher near-infrared light absorption capacity, hence resulting in significantly better biosafety and higher chemodynamic therapy (CDT)/photothermal therapy (PTT) efficacy. This study demonstrates that the therapeutic efficacy of inorganic nanomaterials can be optimized by employing different thermal treatment atmospheres, which provides new insights into the development of efficient anti-tumor agents.

Electrocatalytic reduction of nitrate by carbon encapsulated Cu-Fe electroactive nanocatalysts on Ni foam

Electrocatalytic denitrification is an attractive and effective method for complete elimination of nitrate (NO₃^-). However, its application is limited by the activity and stability of the electrocatalyst. In this work, a novel bimetallic electrode was synthesized, in which N-doped graphitized carbon sealed with Cu and Fe nanoparticles and immobilized them on nickel foam (CuFe NPs@NC/NF) without any chemical binder. The immobilized Cu-Fe nanoparticles not only facilitated the adsorption of the reactant but also enhanced the electron transfer between the cathode and NO₃^-, thus promoting the electrochemical reduction of NO₃^-. Therefore, the as-prepared electrode exhibited enhanced electrocatalytic activity for NO₃^- reduction. The composite electrode with the Cu/Fe molar ratio of 1:2 achieved the highest NO₃^- removal (79.4 %) and the lowest energy consumption (0.0023 kW h mg^-1). Furthermore, the composite electrode had a robust NO₃^- removal capacity under various conditions. Benefitting from the electrochlorination on the anode, this electrochemical system achieved nitrogen (N₂) selectivity of 94.0 %. Moreover, CuFe NPs@NC/NF exhibited good stability after 15 cycles, which should be attributed to the graphitized carbon layer. This study confirmed that CuFe NPs@NC/NF electrode is a promising and inexpensive electrode with long-term stability for electrocatalytic denitrification.

Efficient activation of peroxodisulfate by novel bionic iron-encapsulated biochar: The key roles of electron transfer pathway and reactive oxygen species evolution

In this study, a novel iron-encapsulated biochar (Fe@BC) was prepared using the biomass cultivated with an iron-containing solution. The iron in Fe@BC showed the phase change from Fe₃O₄ to α-Fe, and to CFe_15.1, with the increase of pyrolysis temperature (500-900 °C), and a graphene shell formed on the surface of Fe@BC. In addition, the signals assigned to the π-π* shake up, pyridinic N, graphitic N, and defects of Fe@BC were found to be stronger as the pyrolysis temperature increased. The F4@B9 sample, which was prepared at 900 °C, exhibited an excellent performance (98.01 %) to activate peroxydisulfate (PDS) for the degradation of 2,4-dichlorophenol. Electron paramagnetic resonanceand chemical quenching experiments revealed that reactive oxygen radicals (ROS) including sulfate radical (•SO₄^-), hydroxyl radical (•OH), superoxide radical (•O₂^-), and singlet oxygen (¹O₂) existed in the F4@B9/PDS system. Furthermore, the micro-electrolysis process facilitated the generation of •O₂^- (12.35 %) and ¹O₂ (6.49 %) compared with the pure PDS system. Density functional theory revealed that, for the F4@B9-activated PDS process, the graphene shell of F4@B9 served as catalytic active sites as well. According to the correlation analysis, the iron specie of CFe_15.1 was more favorable for the generation of ROS than α-Fe. Also, π-π* shake up, pyridinic N, graphitic N, and defects participated in the PDS activation. This study provides a new method for the preparation of high-performance catalysts from naturally grown biomass with high iron contents.

Review on the degradation of chlorinated hydrocarbons by persulfate activated with zero-valent iron-based materials

Chlorinated hydrocarbons (CHCs) are often used in industrial processes, and they have been found in groundwater with increasing frequency in recent years. Several typical CHCs, including trichloroethylene (TCE), 1,1,1-trichloroethane (TCA), carbon tetrachloride (CT), etc., have strong cytotoxicity and carcinogenicity, posing a serious threat to human health and ecological environment. Advanced persulfate (PS) oxidation technology based on nano zero-valent iron (nZVI) has become a research hotspot for CHCs degradation in recent years. However, nZVI is easily oxidized to form the surface passivation layer and prone to aggregation in practical application, which significantly reduces the activation efficiency of PS. In order to solve this problem, various nZVI modification solutions have been proposed. This review systematically summarizes four commonly used modification methods of nZVI, and the theoretical mechanisms of PS activated by primitive and modified nZVI. Besides, the influencing factors in the engineering application process are discussed. In addition, the controversial views on which of the two (SO₄·^- and ·OH) is dominant in the nZVI/PS system are summarized. Generally, SO₄·^- predominates in acidic conditions while ·OH prefers neutral and alkaline environments. Finally, challenges and prospects for practical application of CHCs removal by nZVI-based materials activating PS are also analyzed.

Surfactant-enhanced reduction of soil-adsorbed nitrobenzene by carbon-coated nZVI: Enhanced desorption and mechanism

The reduction process of pollutants by nano zero-valent iron (nZVI) is limited by mass transfer and its effective utilization, and previous studies have ignored the electron loss caused by its oxidative passivation. The carbon-coated structure can effectively inhibit the oxidation of nZVI, but the effectiveness of carbon-coated nZVI (Fe⁰@C) as a reducing agent in soil remediation is unclear. Therefore, in this study, the Fe⁰@C/surfactant system was used to remove soil-adsorbed nitrobenzene (NB) to simultaneously enhance the mass transfer process and effective utilization of nZVI. The results showed that the use of surfactants effectively promoted the desorption of NB adsorbed by the soil, and the desorption process was affected by factors such as the type and concentration of surfactants, water-soil ratio, and soil organic matter (SOM) content. The enhanced desorption of NB by the surfactant in the soil system promoted the effective contact between the composite and NB, thereby enhancing the reduction of NB by the composite. In addition, Fe⁰@C exhibited excellent performance for the reduction of soil-adsorbed NB compared with the conventional nZVI, and this advantage was more obvious in the potting soil system. However, the composite will be gradually passivated due to the alkaline environment during the reduction process, and this phenomenon was especially obvious in the campus soil system. When the pH value decreased from 9 to 3, the proportion of aniline (AN) generated in the campus soil system increased from 19.37 % to 69.29 %. In addition, in potting soil systems with high SOM content, the adsorption of soil particles to the composite and the high dissolved organic matter (DOM) content resulting from the high SOM content also negatively affected the reduction process. The conclusions of this study demonstrate the great potential of the Fe⁰@C/surfactant system for in-situ contaminated site remediation applications.

Bisphenol A removal in treated wastewater matrix at neutral pH using magnetic graphite intercalation compounds as persulfate activators

Effluents of municipal wastewater treatment plants (WWTPs) are major sources for releasing contaminants of emerging concern (CECs) into the aquatic environment, which can result in negative effects on aquatic ecosystems and, as a consequence, on humans. Herein, the graphite intercalation concept was used to synthesize heterogeneous catalysts to degrade bisphenol A (BPA) as a model CEC in municipal WWTP effluents at neutral pH. The catalyst was synthesized using the simple molten salt method and showed several benefits, such as iron leaching prevention and stability in environmental matrices. Different methods were applied to describe the catalyst's structural characteristics. The proposed system removed 99.3% of BPA in 75 min using 2 g/L of the synthesized catalyst and 1.19 g/L (5 mM) persulfate at neutral pH. Quenching experiments showed that catalytic activities and BPA removals were significantly aided by both radical and non-radical pathways through the generation of free radicals and singlet oxygen (¹ O₂ ). Furthermore, the reuse of recycled synthesized catalyst was investigated on treated urban wastewater, and the results showed that the catalyst could degrade BPA from the wastewater in consecutive cycles, demonstrating its applicability under real conditions. PRACTITIONER POINTS: BPA was effectively removed from the effluents of municipal WWTPs at neutral pH. A new catalyst (magnetic GIC) was fabricated for heterogeneous catalytic systems. The catalyst activates persulfate to generate free radicals and ¹ O₂ , indicating that radical and non-radical pathways contribute to BPA degradation. The catalyst showed the ability to remove BPA even in the sixth cycle of use, demonstrating its stability and reusability.

One-Step Synthesized Iron-Carbon Core-Shell Nanoparticles to Activate Persulfate for Effective Degradation of Tetrabromobisphenol A: Performance and Activation Mechanism

Tetrabromobisphenol A (TBBPA), as an emerging endocrine disrupter, has been considered one of the persistent organic contaminants in water. It is urgently necessary to develop an efficient technique for the effective removal of TBBPA from water. Herein, a one-step hydrothermal synthesis route was employed to prepare a novel iron-carbon core-shell nanoparticle (Fe@MC) for effectively activating persulfate (PS) to degrade TBBPA. Morphological and structural characterization indicated that the prepared Fe@MC had a typical core-shell structure composed of a 5 nm thick graphene-like carbon shell and a multi-valence iron core. It can be seen that 94.9% of TBBPA (10 mg/L) could be degraded within 30 min at pH = 7. This excellent catalytic activity was attributed to the synergistic effect of the porous carbon shell and a multi-valence iron core. The porous carbon shell could effectively prevent the leaching of metal ions and facilitate PS activation due to its electron transfer capability. Furthermore, numerous micro-reaction zones could be formed on the surface of Fe@MC during the rapid TBBPA removal process. Radical quenching experiments and electron paramagnetic resonance (EPR) technology indicated that reactive oxygen species (ROS), including OH, SO₄^-, O₂^-, and ¹O₂, were involved in the TBBPA degradation process. Based on density functional theory (DFT) calculation, the carbon atoms linked by phenolic hydroxyl groups would be more vulnerable to attack by electron-rich groups; the central carbon was cracked and hydroxylated to generate short-chain aliphatic acids. The toxicity evaluation provides clear evidence for the promising application potential of our prepared material for the efficient removal of TBBPA from water.

Fe3O4 loaded on ball milling biochar enhanced bisphenol a removal by activating persulfate: Performance and activating mechanism

In this study, pristine biochar (BC), ball milling biochar (MBC), Fe₃O₄ modified BC (Fe₃O₄@BC), and Fe₃O₄ modified MBC (Fe₃O₄@MBC) were prepared to compare the Bisphenol A (BPA) removal efficiency by activating persulfate (PDS). All catalysts exhibited excellent degradation rather than adsorption in the PDS system, and Fe₃O₄@MBC800 had the best BPA removal efficiency, with 96.73% degradation and negligible 1.43% adsorption due to the synergistic effect between MBC800 and Fe₃O₄ particles. Radical quenching experiments and electron paramagnetic resonance analysis indicated radical pathways, namely, SO₄∙^- and ∙OH, O₂∙^-, and non-radical pathway (¹O₂) involving BPA degradation. The abundant oxygen-containing groups, increased graphitization and mesopores of MBC800, and Fe³⁺/Fe²⁺ conversion of Fe₃O₄ particles facilitated PDS activation to produce reactive oxygen species. In addition, the superior electrochemical performance accelerated the electron transfer between the catalyst and PDS, promoting BPA degradation in the Fe₃O₄@MBC800/PDS system. More importantly, Fe₃O₄@MBC800 is resistant to environmental interference, including pH, anions, cations, and humic acid, and has good catalytic reusability and stability, which fulfills the requirements of engineering applications. Therefore, Fe₃O₄ loaded on ball-milled biochar provides a convenient strategy for preparing environmentally friendly, economical, and efficient carbon-based catalysts to remove organic contaminants.

Achieving high-performance electrocatalytic reduction of nitrate by N-rich carbon-encapsulated Ni-Cu bimetallic nanoparticles supported nickel foam electrode

The cathode with low-energy consumption and long-term stability is pivotal to achieve the conversion of nitrate (NO₃^-) to nitrogen (N₂) by electrocatalytic denitrification. Herein, a binder-free electrode was synthesized by directly immobilizing N-doped graphitized carbon layer-encapsulated NiCu bimetallic nanoparticles on nickel foam (NF) (NiCu@N-C/NF) and served as the cathode for electrocatalytic NO₃^- reduction. Morphological characterization indicated that Ni and Cu nanoparticles were encapsulated by the N-doped graphitized carbon layer and well-dispersed on the surface of NF. Compared with monometallic composite cathode (Cu@N-C/NF and Ni@N-C/NF), NiCu@N-C/NF exhibited better NO₃^- removal performance (98.63 %) and lower energy consumption (0.007 kW·h mmol^-1), which should be attributed to its strong adsorption ability to NO₃^- and excellent electron transfer property. Meanwhile, its electrocatalytic performance could be maintained in wide initial NO₃^- concentration (1.79-7.14 mM) and solution pH (3-11). With the assistance of electrochlorination, the N₂ selectivity of electrochemical system was up to 99.89 % in the presence of 0.028 M Cl^-. More importantly, NiCu@N-C/NF electrode displayed an ultra-high stability during ten recycling experiments. This study indicated that the binderless composite cathode NiCu@N-C/NF had great potential in electrocatalytic NO₃^- removal from wastewater.

Magnetically separable Fe-base deposited on different carbon sources for ultrasound/persulfate-like heterogeneous activation: Optimized synthesis and field driving process

The eco-friendly composite materials, micro-nano Fe-base/glucose-derived hydro-chars (Fe_b/HCs), were prepared, whose magnetic separation can be achieved in both preparation and water treatment stages. The performances of Fe_b/HCs after N₂ heat-treatment to activate persulfate, chlorite, hydrogen peroxide, etc., in ultrasound field, obtained great improvement by extracting "O". For comparison, other different sized and magnetic iron-carbon based composites based on different carbon sources of activated carbons, cornstalk-derived bio-chars, and glucose-derived pyrolytic carbons were prepared and applied to systematically compare the performance of activation. The Fe_b/HCs with optimizing preparation were utilized as activators to well treat different structures (triphenylmethane-, azo-, and xanthene-) contaminants. The detected p-Benzoquinone and 2-chloro-p-Benzoquinone could be considered as transitional and characteristic intermediates from carbocyclic compounds to chain compounds. The degradation mechanisms were evoked by pH and absorption to trigger via free/non-free radicals processes: high valence iron-oxo species, sulfate radicals, hydroxyl radicals, Cl-based substances, etc. The findings contrastively provided the potential applications of magnetically separable iron-carbon based composites for heterogeneous activation in environmental remediation.

Peroxymonosulfate activation by oxygen vacancies-enriched MXene nano-Co3O4 co-catalyst for efficient degradation of refractory organic matter: Efficiency, mechanism, and stability

Cobalt-based catalysts have been widely explored in the degradation of organic pollutants based on peroxymonosulfate (PMS) activation. Herein, we report an MXene nano-Co₃O₄ co-catalyst enriched with oxygen vacancies (O_v) and steadily fixed in nickel foam (NF) plates, which is used as an efficient and stable PMS activator for the removal of 1,4-dioxane (1,4-D). Ti originating from MXene was doped into the Co₃O₄ crystal, generating large amounts of O_v, which could provide more active sites to enhance PMS activation and facilitate the transformation of Co²⁺ and Co³⁺, causing a high stability. As a result, the 1,4-D removal efficiency of the NF/MXene-Co₃O₄/PMS system (k_app: 2.41 min^-1) was about four times higher than that of the NF/Co₃O₄/PMS system (k_app: 0.62 min^-1). In addition, singlet oxygen was the predominant reactive oxygen species. Notably, the 1,4-D removal of the NF/MXene-Co₃O₄/PMS system was over 95% after 20 h operation in the single-pass filtration mode with only 3.72% accumulative Co leaching, showing excellent stability and reusability of NF/MXene-Co₃O₄. This work provides a defect engineering strategy to design a robust and stable catalytic system for water treatment, which expands the application of MXene in the field of environmental remediation.

Inverse micelle fabrication of ordered mesoporous manganese oxide and degradation of tetracycline hydrochloride

Ordered mesoporous manganese oxides (MnO_x) were synthesized using the modified inverse micelle method. The crystal structure and surface morphology were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The element content and changes in surface valence of catalysts were analyzed by X-ray photoelectron spectroscopy (XPS). The MnO_x were used to activate peroxymonosulfate (PMS) to degrade tetracycline hydrochloride (TCH). The catalytic activity of MnO_x was enhanced at a calcination temperature of 350 °C (MM-3). The degradation efficiency of TCH in MM-3/PMS system was 87.89% in 180 min. Appropriate dosages of catalyst and PMS improve the degradation efficiency of TCH. This system showed a wide range of pH application (3-9). In the presence of coexisting ions and humic acid, the degradation efficiency of TCH was still above 80%. The results of free radical capture experiment and electron paramagnetic resonance (EPR) test proved that the system activates PMS to produce three types of free radicals: SO₄^-, OH and ¹O₂. Therefore, MM-3 is a promising catalyst for the degradation of TCH in practical wastewater treatment.

Efficient degradation of anthracene in soil by carbon-coated nZVI activated persulfate

The easy passivation defect of nano zero-valent iron (nZVI) greatly limits its application in site pollution remediation. Carbon coating can effectively inhibit the passivation of nZVI, but its effectiveness in the soil is still unknown. This study investigated the feasibility of carbon-coated nZVI (Fe⁰@C) as a persulfate (PS) activator to degrade anthracene (ANT) in soil. The results show that the Fe⁰@C/PS system can remove 51.6% of ANT in the soil after 0.5 h of reaction, and reach 76.4% after 12 h of reaction. Not only that, the Fe⁰@C/PS system shows a good removal effect on ANT within the initial pH range of 3-9. Free radical scavenging experiments show that superoxide radicals (O₂^•-) and singlet oxygen (¹O₂) are mainly responsible for the removal of ANT, while O₂^•- may be mainly used as a precursor for the generation of ¹O₂. The activation of PS by Fe⁰@C can generate a large number of free radicals, and soil components (such as β-MnO₂) can promote the conversion of O₂^•- to ¹O₂. Furthermore, the possible degradation pathway of ANT was also proposed. The findings are of great significance to fill up the knowledge gaps in the application of nZVI in soil remediation.

Interface engineering strategy of a Ti4O7 ceramic membrane via graphene oxide nanoparticles toward efficient electrooxidation of 1,4-dioxane

Although Ti₄O₇ ceramic membrane has been recognized as one of the most promising anode materials for electrochemical advanced oxidation process (EAOP), it suffers from relatively low hydroxyl radical (^•OH) production rate and high charge-transfer resistance that restricted its oxidation performance of organic pollutants. Herein, we reported an effective interface engineering strategy to develop a Ti₄O₇ reactive electrochemical membrane (REM) doped by graphene oxide nanoparticles (GONs), GONs@Ti₄O₇ REM, via strong GONs-O-Ti bonds. Results showed that 1% (wt%) GON doping on Ti₄O₇ REM significantly reduced the charge-transfer resistance from 73.87 to 8.42 Ω compared with the pristine Ti₄O₇ REM, and yielded ^•OH at 2.5-2.8 times higher rate. The 1,4-dioxane (1,4-D) oxidation rate in batch experiments by 1%GONs@Ti₄O₇ REM was 1.49×10^-2 min^-1, 2 times higher than that of the pristine Ti₄O₇ REM (7.51×10^-3 min^-1) and similar to that of BDD (1.79×10^-2 min^-1). The 1%GONs@Ti₄O₇ REM exhibited high stability after a polarization test of 90 h at 80 mA/cm², and within 15 consecutive cycles, its oxidation performance was stable (95.1-99.2%) with about 1% of GONs lost on the REM. In addition, REM process can efficiently degrade refractory organic matters in the groundwater and landfill leachate, the total organic carbon was removed by 54.5% with a single-pass REM. A normalized electric energy consumption per log removal of 1,4-D (EE/O) was observed at only 0.2-0.6 kWh/m³. Our results suggested that chemical-bonded interface engineering strategy using GONs can facilitate the EAOP performance of Ti₄O₇ ceramic membrane with outstanding reactivity and stability.

Nitrogen-doped carbon nanosheets with Fe-based nanoparticles for highly efficient degradation of antibiotics and sulfate ion enhancement effect

Developing Fe-based catalysts with high-effective and environmentally friendly features in Fenton-like system for treating wastewater is still a challenge. Novel nitrogen-doped carbon nanosheets with Fe⁰/Fe₃C nano-particles (Fe@NCS-900) were prepared through a simple solvent-free strategy by pyrolyzing the mixture of 2,6-diaminopyridine and ferric chloride hexahydrate under 900 °C. The Fe@NCS-900 possessed almost 100% removal efficiency and 66.5% mineralization rate for the degradation of CBZ in 10 min. Moreover, the Fe@NCS-900 exhibited an apparent first-order constant as high as 0.8809 min^-1, which is 22 and 29 times higher than that of the commercial Fe⁰ and traditional Fenton system, respectively, which could be attribute to the high graphitization degree and rich nitrogen content. Besides, the results of the radical quenching experiments, electron paramagnetic resonance (EPR) and the probe experiments demonstrated that a large number of high valent iron species (Fe (IV)) besides singlet oxygen (¹O₂) and superoxide radicals (O₂^•-) existed and contributed to the CBZ degradation. More interestingly, the addition of coexisting anion SO₄^2- in the reaction system could significantly boost the concentration of •OH and SO₄^•- by 28.3 times and 9.7 times, respectively, resulting in the increase of the apparent first-order constant by 5.9 times (5.1733 min^-1), which was entirely different from previous reports that SO₄^2- had no effect on the catalytic activity or even displayed slightly inhibitory effect. In addition, the catalyst exhibited broad pH adaptability in the pH range of 2-9. The intermediate products of CBZ degradation were investigated by liquid chromatography mass spectrometry (LC-MS) and the degradation pathway was proposed. This paper provides new insights for developing a promising Fe-based nitrogen-doped catalyst for practical wastewater treatment.

A novel preparation process of straw-based iron material for enhanced persulfate activation of reactive black 5 degradation

In this study, a new straw-iron composite material (ST@Fe) was synthesized through impregnation and freeze-drying process for persulfate (PS) activation to degrade reactive black 5 (RB5). Scanning electron microscope, Brunauer-Emmett-Teller, Fourier transform infrared spectrometry, and X-ray photoelectron spectroscopy confirmed that straw owns huge pore structure and varieties of organic functional groups, including hydroxyl carboxyl groups, which could effectively adsorb and complex iron ions. The interaction between the active iron particles in ST@Fe and straw generated Fe²⁺ for PS activation, effectively degrading over 94.80% of RB5 at an initial concentration of 20 ppm in 100 min with a specific degradation capacity of 18.97 min^-1 per unit of iron ions. ST@Fe/PS system demonstrated high tolerance in a wide initial pH range, which could gradually attack the RB5 molecular structure and significantly reduce the mineralization of water. Quenching experiments and electron paramagnetic resonance demonstrated the efficient generation of ROS including sulfate radicals, hydroxyl radicals, and singlet oxygen, and confirmed the dominance of sulfate radicals in the degradation process. The continuous degradation capacity and reusability of ST@Fe were also evaluated, which proved that the contaminant could be effectively degraded even after multiple cycles in the simulated textile wastewater, indicating its potential for use in practical remediation. This work provided a new method for the preparation of modified functional materials for the degradation of organic pollutants in textile wastewater and posed a novel strategy for the utilization of waste biomass.

Enhanced utilization efficiency of peroxymonosulfate via water vortex-driven piezo-activation for removing organic contaminants from water

The efficient activation and utilization of peroxymonosulfate (PMS) in PMS-based advanced oxidation processes is a high-priority target for the removal of organic contaminants. This work introduces a water vortex-driven piezoelectric effect from few-odd-layered MoS₂ into the PMS activation to remove benzotriazole (BTR) and other organic contaminants from the water. Approximately 91.1% of BTR can be removed by the MoS₂ piezo-activated PMS process with a reaction rate constant of 0.428 min^-1, which is 2.09 times faster than the sum of the individual MoS₂, water vortex, and piezocatalysis rates. Meanwhile, the PMS utilization efficiency reached 0.0147 in the water vortex-driven piezo-activation system, which is 3.97 times that of the sum from the vortex/PMS and MoS₂/PMS systems. These results demonstrate that the presence of MoS₂ under a water vortex can trigger a piezoelectric potential and generate abundant free electrons to activate PMS to generate various active species for degradation of organic contaminants.

Insights into the role of nanoscale zero-valent iron in Fenton oxidation and its application in naphthalene degradation from water and slurry systems

Few researches have focused on the role of nanoscale zero-valent iron (nZVI) in Fenton-like process for polycyclic aromatic hydrocarbons (PAHs) removal. In this study, the naphthalene (NAP) degradation tests in ultrapure water showed that nZVI addition could enhance NAP degradation from 79.7% to 99.0% in hydrogen peroxide (H2 O2 )/Fe (II)/nZVI/NAP system at the molar ratio of 10/5/3/1, showing the excellent role of nZVI in promoting NAP removal. Multiple linear regression analysis found that the correlation coefficient between H2 O2 consumption and NAP degradation was converted from -9.17 to 0.48 with nZVI and 1-mM H2 O2 , indicating that nZVI could decompose H2 O2 more beneficially for NAP degradation. Multiple Fe (II)-dosing and iron leaching tests revealed that nZVI could gently liberate Fe (II) and promote Fe (II)/Fe (III) redox cycle to enhance the NAP degradation. When the H2 O2 /Fe (II)/nZVI/NAP molar ratios of 10/5/3/1 and 50/25/15/1 were applied in the simulated NAP contaminated actual groundwater and soil slurry, respectively, 75.0% and 82.9% of NAP removals were achieved. Based on the major degradation intermediates detected by GC/MS, such as 1,4-naphthalenedione, cinnamaldehyde, and o-phthalaldehyde, three possible NAP degradation pathways were proposed. This study provided the applicable potential of nZVI in Fenton process for PAHs contaminated groundwater and soil remediation. PRACTITIONER POINTS: nZVI enhanced the NAP degradation in Fenton-like process. Three schemes of NAP degradation pathway were proposed. nZVI performed well in the remediation of the simulated NAP contamination.

Selective Separation Catalysis Membrane for Highly Efficient Water and Soil Decontamination via a Persulfate-Based Advanced Oxidation Process

The application of sulfate radical advanced oxidation for organic pollutant removal has been hindered by some shortages such as the recycling difficulty of a powered catalyst, the low utilization efficiency of oxidants, and the secondary pollution (including soil acidification) after reaction. Herein, we fabricate a selective separation catalysis membrane (SSCM) for a highly efficient and environment-friendly persulfate-based advanced oxidation process. The SSCM comprises a top polydimethylsiloxane layer which is selectively penetrable to hydrophobic organic pollutants, followed by a catalyst layer with a magnetic nitrogen-doped porous carbon material, targeting the advanced oxidation of the selected pollutants. Compared with the catalyst in powder form, such SSCM devices significantly reduced the dosage of peroxymonosulfate by more than 40% and the catalyst dosage by 97.8% to achieve 80% removal of phenol with the coexistence of 20 mg L^-1 humic acid (HA). The SSCM can extract target pollutants while rejecting HA more than 91.43% for 100 h. The pH value in the receiving solution demonstrated a significant reduction from 7.01 to 3.00. In comparison, the pH value in the feed solution varied from 6.05 to a steady 4.59. The results can be ascribed to the specific functionality for the catalyst anchored, natural organic matter isolation, and reaction compartmentation provided by SSCMs. The developed SSCM technology is beneficial for catalysts reused in remediation practices, saving oxidant dosage, and avoiding acidification of soil and water, thus having tremendous application potential.

Overcoming Acidic H2O2/Fe(II/III) Redox-Induced Low H2O2 Utilization Efficiency by Carbon Quantum Dots Fenton-like Catalysis

Fenton reaction has important implications in biology- and environment-related remediation. Hydroxyl radicals (^•OH) and hydroxide (OH^-) were formed by a reaction between Fe(II) and hydrogen peroxide (H₂O₂). The acidic H₂O₂/Fe(II/III) redox-induced low H₂O₂ utilization efficiency is the bottleneck of Fenton reaction. Electron paramagnetic resonance, surface-enhanced Raman scattering, and density functional theory calculation indicate that the unpaired electrons in the defects of carbon quantum dots (CQDs) and the carboxylic groups at the edge have a synergistic effect on CQDs Fenton-like catalysis. This leads to a 33-fold higher H₂O₂ utilization efficiency in comparison with Fe(II)/H₂O₂ Fenton reaction, and the pseudo-first-order reaction rate constant (k_obs) increases 38-fold that of Fe(III)/H₂O₂ under equivalent conditions. The replacement of acidic H₂O₂/Fe(II/III) redox with CQD-mediated Fe(II/III) redox improves the sluggish Fe(II) generation. Highly effective production of ^•OH in CQDs-Fe(III)/H₂O₂ dramatically decreases the selectivity of toxic intermediate benzoquinone. The inorganic ions and dissolved organic matter (DOM) in real groundwater show negligible effects on the CQDs Fenton-like catalysis process. This work presents a process with a higher efficiency of utilization of H₂O₂in situ chemical oxidation (ISCO) to remove persistent organic pollutants.

Mutual-activation between Zero-Valent iron and graphitic carbon for Cr(VI) Removal: Mechanism and inhibition of inherent Side-reaction

The low reactivity of zero-valent iron (ZVI) usually limits its application for pollutant remediation. Therefore, a microscopic galvanic cell (mGC) with short-circuited cathode and anode was synthesized to intensify its galvanic corrosion. The prepared mGC exhibited 7.14 times higher Fe(II) release performance than ordinary nanoscale-ZVI (nZVI), rendering efficient Cr(VI) removal performance. Density functional theory (DFT) revealed mutual-activation of the cathode and anode due to close proximity, dramatically enhancing the galvanic corrosion of Fe(0) in mGC. The corrosion potential of mGC was measured as -0.77 V, which was 100 mV more negative than nZVI. The released electrons and surface-bond Fe(II) from anode in mGC was proved to be the dominant reductive species. More importantly, Cr(VI) reduction was slightly inhibited by hydroxyl radicals generated by a series of inherent side-reactions in the system, which could be well eliminated by low concentrations of 4-acetamido phenol. This study provides a promising strategy for ZVI activation, and sheds light on its environmental applications.

FeCo alloy encased in nitrogen-doped carbon for efficient formaldehyde removal: Preparation, electronic structure, and d-band center tailoring

Formaldehyde is a typical indoor air pollutant that has posed severely adverse effects on human health. Herein, a novel FeCo alloy nanoparticle-embedded nitrogen-doped carbon (FeCo@NC) was synthesized with the aim of tailoring the transition-metal d-band structure toward an improved formaldehyde oxidation activity for the first time. A unique core@shell metal-organic frameworks (MOFs) architecture with a Fe-based Prussian blue analogue core and Co-containing zeolite imidazole framework shell was firstly fabricated. Then, Fe and Co ion alloying was readily achieved owing to the inherent MOF porosity and interionic nonequilibrium diffusion occurring during pyrolysis. High-angle annular dark-field scanning transmission electron microscopy and X-ray absorption fine structure spectra confirm that small FeCo alloys in situ form in FeCo@NC, which exhibits a higher formaldehyde removal efficiency (93%) than the monometallic Fe-based catalyst and a remarkable CO₂ selectivity (85%) at room temperature. Density functional theory calculations indicate the number of electrons transferred from the metal core to the outer carbon layer is altered by alloying Fe and Co. More importantly, a downshift in the d-band center relative to the Fermi level occurs from - 0.93 to - 1.04 eV after introducing Co, which could alleviate the adsorption of reaction intermediates and greatly improve the catalytic performance.

Insights into the mechanism of enhanced peroxymonosulfate degraded tetracycline using metal organic framework derived carbonyl modified carbon-coated Fe0

Tetracycline (TC) is a commonly used antibiotic that has gained wide spread notoriety owing to its high environmental risks. In this study, rich carbonyl-modified carbon-coated Fe⁰ was obtained by pyrolysis of MIL-100(Fe) in an Ar atmosphere, and used to activate peroxymonosulfate (PMS) for the degradation of tetracycline in water. The roles of Fe⁰, carbon and surface carbonyl on PMS activation were investigated. Fe⁰ continuously activated PMS, acted as a sustained-release source of Fe²⁺, and could effectively activate PMS to produce SO₄^•-, O₂^•- and •OH. Carbon was found to do responsible for electron transportation during the activation of PMS and slow down the oxidation of Fe⁰. The carbonyl group on the carbon surface layer was the active site of ¹O₂, which explains the enhanced performance for TC degradation. When Ca = 0.1 g/L and C₀ = 0.4 mM, TC degradation rate reached 96%, which was attributed to the synergistic effect of radicals (i.e., SO₄^•-, O₂^•-, •OH) and non-radical (i.e., ¹O₂). Finally, the degradation pathway was proposed by combining density functional theory (DFT) calculations with liquid chromatography-mass spectrometry (LC-MS), toxicities of the intermediate products were also evaluated. All results show that carbonyl-modified carbon-coated Fe⁰ possesses promising capacity for the removal of antibiotics from water.

Highly Dispersed CoO Embedded on Graphitized Ordered Mesoporous Carbon as an Effective Catalyst for Selective Fischer–Tropsch Synthesis of C5+ Hydrocarbons

Herein, we report the high Fischer–Tropsch synthesis performance of the Co-based catalysts supported on graphitized ordered mesoporous carbon (GMC-900) by using a facile strategy. Compared with CMK-3 and active carbon (AC), the obtained GMC-900 by using pollution-free soybean oil as a carbon source exhibited enhanced catalytic performance after loading Co species due to its highly crystallized graphitic structure and uniform dispersion of CoO. As a result, Co/GMC-900 was an effective catalyst with the maximum C₅₊ selectivity of 52.6%, which much outperformed Co/CMK-3 and Co/AC. This research provides an approach to produce advanced Co-based catalysts with satisfactory performance for efficient Fischer–Tropsch synthesis.

Taping into the super power and magic appeal of ultrasound coupled with EDTA on degradation of 2,4,6-TCP by Fe0 based advanced oxidation processes

Chlorophenol is a widely used organic compound, and the environmental and health problems caused by it have being worsened in recent years. This study used 2,4,6-trichlorophenol (2,4,6-TCP) as the target pollutant, and employed ultrasound (US) enhanced zero-valent iron (Fe⁰)/EDTA/air system (FEA), namely US/FEA, to remove 2,4,6-TCP. The influence of single factor experimental conditions such as EDTA concentration, Fe⁰ dosage, US power, pH and pollutant concentration on the removal efficiency of 2,4,6-TCP was investigated, and the optimal reaction conditions were determined. The mechanism of reactive oxygen species (ROS) produced by US/FEA was explored. The degradation process and removal mechanism of 2,4,6-TCP in the US/FEA were discussed through the determination and analysis of intermediate products. The results showed that US could continuously activate and renew the Fe⁰ surface, accelerate its oxidation and corrosion process, and then continuously and stably produce sufficient amounts of Fe²⁺ and Fe³⁺. Ultrasonic cavitation effect could reduce the difficulty of O₂ activation reaction, and promote the production of sufficient H₂O₂. The addition of EDTA made the system have a wide range of pH applications, and its performance under neutral and alkaline conditions was also superior. The ROS of US/FEA included ·OH, O₂^·- and Fe(IV), where Fe(IV) was the main contributor to the removal of 2,4,6-TCP. In addition, the degradation of 2,4,6-TCP had two processes including dechlorination and benzene ring opening. First, 2,4,6-TCP was dechlorinated and degraded into phenol. And then, phenol was degraded into small molecular acids by ring-opening, and finally it was mineralized into CO₂ and H₂O completely. US/FEA is a promising technology for high-efficiency degradation of organic matter and deep environmental purification.

Synthesis and characterization of iron-nitrogen-doped biochar catalysts for organic pollutant removal and hexavalent chromium reduction

Fe, N atoms deposited on porous biochar (Fe-N@BC) composites were synthesized and employed as an efficient catalyst for organic pollutant removal and Cr^VI reduction. Naturally abundant, renewable and N-rich pomelo peel as a carbon and nitrogen source and unsubstituted phthalocyanine/iron phthalocyanine complexes as a Fe and nitrogen resource were used to develop the Fe-N@BC via a carbonization process. It is found that Fe-N@BC hybrids have homogeneous dispersion of Fe and N atoms on 3D hierarchically porous biochar, which significantly improves the performance toward the detoxification of organic pollutants using peroxymonosulfate as an oxidant, as well as the reduction of hexavalent chromium by formic acid as a reductant. Furthermore, the effects of Fe loading and pyrolytic temperature on catalysis were comprehensively analyzed and optimized. The excellent activity of Fe-N@BC in acid media can be attributed to the high dispersion of Fe species, high content of doped nitrogen as well as hierarchical micro-mesopores, which induce to expose more active sites for catalysis. Owing to the structure-enabled acidic stability, Fe-N@BC efficiently retains its activity as well as its structural stability after several cycles of reactions. This work provides a new approach to construct Fe, N-doped biochar as an effective catalyst for the detoxification of organic and inorganic pollutants.

Ultrasonic role to activate persulfate/chlorite with foamed zero-valent-iron: Sonochemical applications and induced mechanisms

The novel system, consisting of composite oxidants (persulfate/chlorite, S2O82-/ClO2-) and stationary phase activator (zero-valent-iron foam, Fe0f) driven by ultrasonic (US) field, was applied to treat the triphenylmethane derivative effectively even at low temperature (≈ 289 K). By comparisons of sub-systems, the US roles to S2O82-, ClO2-, and Fe0f were seriatim analyzed. US made the reaction order of multi-component system tend to within 1 (leading to de-order reaction), and widened pH activating range of the Fe0f by sonicate-polishing during the process of ClO2- co-activating S2O82-. US and Fe0f were affected by fluid eddy on activating S2O82-/ClO2-. The Fe0f had slight effect on the temperature of US bubble-water interface but the addition of ClO2- lowered it. The partitioning capacity of the above US reactive zone increased during the reaction. US and ClO2- could enrich the kinds of degradation intermediates. The contributions of free radicals (ClOx-based radicals, sulfate radicals (SO4-), and hydroxyl radicals (OH)) and non-free radicals (ClO2, and O = FeIV/V from ionic Fe under "-O-O-" of S2O82- and cyclic adjustment reaction of ClO2-) processes by sonochemical induction were equally important by corresponding detection means. Especially, real-time and online high-resolution mass spectrum by self-developing further confirmed the chain transfers of different free radicals due to US role. The findings expanded the application of sono-persulfate-based systems and improved understanding on activation mechanism.

Carbon coating enhances single-electron oxygen reduction reaction on nZVI surface for oxidative degradation of nitrobenzene

Research on the in-situ generation of hydrogen peroxide (H₂O₂) using nano zero-valent iron (nZVI) has received more and more attention in recent years. However, the low utilization rate of nZVI, strict production conditions, and high energy consumption limit the application of this technology in actual environmental pollution remediation. In this study, carbon-coated nZVI (Fe⁰@C) was used to synthesize H₂O₂ in situ and realize the mineralization of nitrobenzene (NB). The results showed that the composite removed 91% of NB through adsorption, reduction, and oxidation within 120 min, of which oxidation accounts for 42.92%. Not only that, the composite material could achieve effective mineralization of NB under the wide pH range of 3-7. Quantitative experiments of hydroxyl radicals (HO) showed that the composite could generate 185.64 μM HO in 120 min without any extra energy consumption. The carbon-coated structure effectively inhibits the formation of the passivation layer on the surface of the nZVI, thereby ensuring the high activity of the Fe⁰. In addition, the carbon coating strengthens the sequential single-electron transfer process by changing the oxygen reduction pathway on the surface of the nZVI, so that the Fe⁰ can efficiently generate HO through the superoxide radical (O₂^-) pathway under neutral conditions. This study provides a fundamental understanding of the in-situ synthesis of H₂O₂ to mineralize NB by carbon-coated nZVI.

Oxygen vacancy-mediated sandwich-structural TiO2-x /ultrathin g-C3N4/TiO2-x direct Z-scheme heterojunction visible-light-driven photocatalyst for efficient removal of high toxic tetracycline antibiotics

A surface defect sandwich-structural TiO_2-x/ultrathin g-C₃N₄/TiO_2-x direct Z-scheme heterojunction photocatalyst is successfully constructed. The results manifest the existence of oxygen vacancies, sandwich structure and direct Z-scheme heterojunction. Noticeably, TiO_2-x/ultrathin g-C₃N₄/TiO_2-x efficiently eliminates high toxic tetracycline hydrochloride by means of·O₂^-, h⁺ and·OH, whose removal rate is 87.7% during 90 min and the pseudo-first-order rate constant reaches up to 31.7 min^-1 × 10^-3. The extraordinary performance can be attributed to the special 3D structure, Z-scheme heterojunction expediting charge transfer and promoting the generation of active species, meanwhile the oxygen vacancies enhancing the spatial separation of photo-induced carriers. Moreover, various environmental factors are systematically explored by statistics. SO₄^2-, NH₃-N and pH exhibit an obvious impact on removal rate. Meanwhile, TiO_2-x/ultrathin g-C₃N₄/TiO_2-x could also effectually remove tetracycline hydrochloride from complex actual-wastewater and exhibit high stability. Besides, the photocatalytic mechanism and degradation path of tetracycline hydrochloride are also elucidated.

Carbon quantum dots decorated heteroatom co-doped core-shell Fe0@POCN for degradation of tetracycline via multiply synergistic mechanisms

In this study, novel core-shell catalyst with a new ternary heterostructure was synthesized (Fe⁰@POCN/CQDs) for the degradation of tetracycline (TC). The TEM results showed that the Fe⁰ particles were wrapped in POCN material and many nano CQDs were uniformly dispersed in the material. The new ternary nanocomposite exhibits excellent photocatalytic activity for the removal of TC, which was approximately 4.76 times higher than that of GCN. The enhancement of photocatalytic activity was attributed to the effective heterojunction as well as the multiply synergistic effects of POCN combined with Fe⁰ and CQDs, which was beneficial for retardation of recombination rate of photogenerated electron-hole pairs and generation of more free radicals for the oxidation of TC. Besides, the reactive oxygen species (ROS) of h⁺, •O₂^- and •OH played pivotal roles in the degradation of TC by Fe⁰@POCN/CQDs during the photocatalytic reaction. At the same times, sulfate radical (SO₄^•-) and hydroxyl radical (•OH) highlighted the dominant role in the degradation process compared with other free radicals under persulfate hybrid mixture system (PS system), which was further confirmed by radical scavenger experiments and electron spin resonance (ESR) analysis. The response surface methodology (RSM) study indicated that the optimal removal parameters of tetracycline could reach 97.57% within 30 min under PS system. In addition, the possible degradation pathway intermediates of TC were studied by HPLC-MS and the reaction catalytic activity mechanism of Fe⁰@POCN/CQDs/persulfate system was discussed.

Removal of antibiotic resistance genes from secondary effluent by processes combining nano-iron, ultrasound-activated persulfate, and ultrafiltration

Antibiotic resistance genes (ARGs), as a new type of environmental pollutant that threaten human health, have been detected in the effluent of sewage treatment systems. In this study, the removal from water of ARGs, 16S rRNA, class 1 integron (intI1), and dissolved organic carbon (DOC) were investigated using processes combining nano-iron (nFe), ultrasound (US), activated persulfate (PS) and ultrafiltration (UF). The oxidation mechanism was also studied. The results showed that both nFe and US activation could improve the oxidative effect of PS, and the effect of nFe was better than that of US. Compared with PS-UF, nFe/PS-UF and US/PS-UF significantly enhanced the removal of various ARGs and DOC. nFe/PS-UF was the most effective treatment, reducing cell-associated and cell-free ARGs by 1.74-3.14-log and 1.00-2.61-log, respectively, while removing 30% of DOC. Pre-oxidation methods using PS, nFe/PS, and US/PS significantly enhanced the efficacy of UF for removing DOC with molecular weights above 50 kDa and below 10 kDa, but the removal of DOC between 10 and 50 kDa decreased. The free radicals SO₄^·- and ·OH were shown to participate in the process of ARGs oxidation.