Speciation Transformation of Phosphorus in Poultry Litter during Pyrolysis: Insights from X-ray Diffraction, Fourier Transform Infrared, and Solid-State NMR Spectroscopy

Influence of potassium addition on phosphorus availability and heavy metals immobility of biochar derived from swine manure

Pyrolysis of animal manure at high temperature is necessary to effectively immobilize heavy metals, while the available phosphorus (P) level in biochar is relatively low, rendering it unsuitable for use as fertilizer. In this study, the pretreatment of swine manure with different potassium (K) sources (KOH, K2CO3, CH3COOK and C6H5K3O7) was conducted to produce a biochar with enhanced P availability and heavy metals immobility. The addition of all K compounds lowered the peak temperature of decomposition of cellulose in swine manure. The percentage of ammonium citrate and formic acid extractable P in biochar increased with K addition compared to undoped biochar, with CH3COOK and C6H5K3O7 showing greater effectiveness than KOH and K2CO3, however, water- extractable P did not exhibit significant changes. Additionally, the available and dissolved Si increased due to the doping of K, with KOH and K2CO3 having a stronger effect than CH3COOK and C6H5K3O7. X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) analysis revealed that K addition led to the formation of soluble CaKPO4 and silicate. In addition, the incorporation of K promoted the transformation of labile copper (Cu) and znic (Zn) into the stable fraction while simultaneously reducing their environmental risk. Our study suggest that the co-pyrolysis of swine manure and organic K represents an effective and valuable method for producing biochar with optimized P availability and heavy metals immobility.

Sustainable Biomass Acts as an Electron Donor for Cr(VI) Reduction during the Subcritical Hydrothermal Process: Molecular Insights into the Role of Hydrochar and Liquid Compounds

Heavy metal pollution is a critical environmental issue that has garnered significant attention from the international community. Subcritical hydrothermal liquefaction (HTL) as an emerging green technology has demonstrated remarkable promise in environmental remediation. However, there is limited research on the remediation of highly toxic Cr(VI) using HTL. This study reveals that the HTL reaction of biomass enables the simultaneous reduction and precipitation of Cr(VI). At 280 °C, the reduction of Cr(VI) was nearly complete, with a high reduction rate of 98.9%. The reduced Cr as Cr(OH)3 and Cr2O3 was primarily enriched in hydrochar, accounting for over 99.9% of the total amount. This effective enrichment resulted in the removal of Cr(VI) from the aqueous phase while simultaneously yielding clean liquid compounds like organic acids and furfural. Furthermore, the elevated temperature facilitated the formation of Cr(III) and enhanced its accumulation within hydrochar. Notably, the resulting hydrochar and small oxygenated compounds, especially aldehyde, served as electron donors for Cr(VI) reduction. Additionally, the dissolved Cr facilitated the depolymerization and deoxygenation processes of macromolecular compounds with lignin-like structures, leading to more small oxygenated compounds and subsequently influencing Cr(VI) reduction. These findings have substantial implications for green and sustainable development.

Phosphorus release and realignment in anaerobic digestion of thermal hydrolysis pretreatment sludge - Masking effects from high ammonium

Waste activated sludge (WAS) is a significant phosphorus (P) repository, and there is a growing interest in P recovery from WAS. Typically, the commercial technology for treating WAS involves thermal hydrolysis pretreatment (THP) coupled with anaerobic digestion (AD). However, there is ongoing debate regarding the transformation and distribution of P throughout this process. To address this, a long-term THP-AD process was operated in this study to comprehensively investigate P transformation and distribution. The results revealed that a substantial biodegradation of dissolved organic nitrogen (DON) raised the pH of the digestate to 8.3 during the AD process. This increased pH facilitated the dissolution of Al, leading to a reduction of 6.92 mg/L of NaOH-P. Simultaneously, sulfate reduction contributed to a decrease of 11.04 mg/L of Bipy-P in the solid. However, the reduction of Bipy-P and NaOH-P in the solid did not result in an improved P release to the supernatant. Conversely, a decrease of 23.60 mg/L P in the aqueous phase was observed after anaerobic digestion. The disappeared P was primarily precipitated with Mg and Ca, driven by the increased pH, and it contributed to the increase of HCl-P in the solid from 107.80 to 144.52 mg/L. These findings were further confirmed by results obtained from scanning electron microscopy (SEM), X-ray powder diffraction (XRD), and solid-state 31P nuclear magnetic resonance (NMR) spectroscopy. This study provides valuable insights into the mechanisms of P transformation during THP-AD process that is nearly opposite from conventional AD system.

Phosphorus Footprint in the Whole Biowaste-Biochar-Soil-Plant System: Reservation, Replenishment, and Reception

Two phosphorus (P)-rich biowastes, sewage sludge (SS) and bone dreg (BD), were selected to clarify P footprints among biowaste, biochar, soil, and plants by introducing a novel "3R" concept model. Results showed that pyrolysis resulted in P transformation from an unstable-organic amorphous phase to a stable-inorganic crystalline phase with a P retention rate of 70-90% in biochar (P reservation). In soil, SSBC released more P in acid red soil and alkaline yellow soil than BDBC, while the opposite result appeared in neutral paddy soil. The P released from SSBC formed AlPO4 by combining with Al in soil, whereas P from BDBC transformed into Ca5(PO4)3F(or Cl) in conjunction with Ca in the soil (P replenishment). Various plants exhibited an uptake of approximately 2-6 times more P from biochar-amended soil than from the original soil (P reception). This study can guide the application of biochar in various soil-plant systems for effective nutrient reclamation.

Development of Hydroxyapatite Coatings for Orthopaedic Implants from Colloidal Solutions: Part 2-Detailed Characterisation of the Coatings and Their Growth Mechanism

This study is the second part of a two-part study whereby supersaturated solutions of calcium and phosphate ions generate well-defined hydroxyapatite coatings for orthopaedic implants. An 'ideal' process solution is selected from Part 1, and the detailed characterisation of films produced from this solution is undertaken here in Part 2. Analysis is presented on the hydroxyapatite produced, in both powder form and as a film upon titanium substrates representative of orthopaedic implants. From thermal analysis data, it is shown that there is bound and interstitial water present in the hydroxyapatite. Nuclear magnetic resonance data allow for the distinction between an amorphous and a crystalline component of the material. As hydroxyapatite coatings are generated, their growth mechanism is tracked across repeated process runs. A clear understanding of the growth mechanism is achieved though crystallinity and electron imaging data. Transmission electron imaging data support the proposed crystal growth and deposition mechanism. All of the data conclude that this process has a clear propensity to grow the hydroxyapatite phase of octacalcium phosphate. The investigation of the hydroxyapatite coating and its growth mechanism establish that a stable and reproducible process window has been identified. Precise control is achieved, leading to the successful formation of the desired hydroxyapatite films.

The interaction of different chlorine-based additives with swine manure during pyrolysis: Effects on biochar properties and heavy metal volatilization

Poor properties and high concentrations of heavy metals are still major concerns of successful application of animal manure-derived biochar into the environment. This work thus proposed to add chlorine-based additives (Cl-additives, i.e., CaCl2, MgCl2, KCl, NaCl, and PVC, 50 g Cl/ kg) to improve biochar properties and enhance heavy metal volatilization during swine manure pyrolysis. The results showed that the addition of CaCl2 could improve the retention of carbon (C) by up to 13.1% during pyrolysis, whereas other Cl-additives had little effect on it. Moreover, CaCl2 could enhance the aromaticity of biochar, as indicated by lower H/C ratio than raw biochar. Pretreatment with CaCl2, MgCl2 and PVC reduced phosphorus (P) solubility but increased its bioavailability via the formation of chlorapatite (Ca5(PO4)3Cl). The CaCl2 was more effective for enhancing the volatilization efficiency of heavy metals than other Cl-additives, except for Pb that tended to react with the generated Ca5(PO4)3Cl to form more stable and less volatile Pb5(PO4)3Cl. However, high pyrolysis temperature (900℃) was essential for CaCl2 to simultaneously decrease the bioavailability of heavy metals. Our results indicated that co-pyrolysis of swine manure with CaCl2 is a promising strategy to increase C retention, P bioavailability, and volatilization of heavy metals, and, at higher temperature, reduce the bioavailability of biochar-born heavy metals.

The screening of various biochars for Cd2+ removal at relevant soil pH

Fourteen biochars from seven biomass sources were investigated on their long-term Cd2+ removal. The experiments consisted of a ten-day batch Cd2+ adsorption in a pH-buffered solution (pH = 6) to minimise pH effects. Insect frass, spent peat and chicken manure-derived biochars are promising Cd2+ adsorbents. Pyrolysis temperature was crucial for optimising Cd2+ removal by insect frass and spent peat-derived biochars. For these biochars, a pyrolysis temperature of 450 °C was optimal. In contrast, the Cd2+ removal by chicken manure biochars was independent of pyrolysis temperature. The Cd2+ removal by insect-frass and spent peat-derived biochars was associated with chemisorption on surface functionalities, while using chicken manure biochars was more associated with Cd2+ precipitation. The kinetics of Cd2+ removal over the course of ten days showed that insect frass biochar (450 °C) showed a gradual increase from 36 to 75 % Cd2+ removal, while chicken manure and spent peat-derived biochar (450 °C) already showed a higher Cd2+ removal (72 - 89 %) after day 1. This evidences that a long-term Cd2+ removal effect can be expected for some biochars. This should certainly be taken into consideration in future soil-based experiments.

Sustainable exploitation and safe utilization of biochar: Multiphase characterization and potential hazard analysis

Pyrolysis temperature determines the multiphase (solid and dissolved) structure of biochar (BC). In this study, the temperature-dependent evolution of characteristics and potential hazards of three crop (cotton, alfalfa, and wheat) residue BC were systematically investigated. The results showed that pyrolysis temperature significantly affected the elemental composition and morphology of BC. A higher pyrolysis temperature led to a higher aromatization and graphitization degree of BC. A numerical relationship between pyrolysis temperature and BC surface properties (functional groups, carbonization degree) was established. Pyrolysis temperature controlled the content, composition, and functional group evolution of BC-derived dissolved organic matter. Although the amount of potentially toxic elements (PTEs) in BC was concentrated after pyrolysis, the potentially risk of PTEs significantly decreased. The spin concentration of persistent free radicals in BC prepared at 500 °C was the highest. These findings will hopefully offer comprehensive guidance for sustainable utilization of crop straw and fit-for-purpose exploitation of BC.

Phosphate-solubilizing microorganisms regulate the release and transformation of phosphorus in biochar-based slow-release fertilizer

Coupling phosphate-solubilizing microorganisms (PSM) can improve the availability of phosphorous (P) in biochar-based slow-release P fertilizers (BPF). However, the mechanism in release and transformation of P in BPF regulated by PSM is still unclear. Herein, the biocompatibility and the adhesion behaviors of BPF and PSM (Enterobacter hormaechei Rs-198) in soil were firstly studied, and a 90 days' laboratory-scale soil incubation experiment of BPF and Rs-198 was performed to study the transformation of P of BPF. The results show that BPF has a good biocompatibility for Rs-198 due to its low aromaticity, graphitization and free radicals' content (0.084 mg/g). Rs-198 are adhered to the surface of BPF in soil due to the high negative secondary energy minimum and low total interaction energy between Rs-198 and BPF. Available P in the incubation of BPF and Rs-198 (BR treatment) is significantly higher than that of the incubation of BPF (BF treatment) at initial 60 days. However, the content of available P in BR treatment is much lower compared with that in BF treatment on day 90, which is attributed to the entrapment of released P from BPF by Rs-198 and the formation of polyphosphate (polyP) rather than bound with soil mineral. Overall, this study presents new insights into the transformation of P in BPF regulated by PSM.

Transformation of phosphorus species during phosphoric acid-assisted pyrolysis of lignocellulose

Phosphoric acid-assisted pyrolysis (PAAP) is a pyrolysis technique with potential for the engineered and environmental application. Nevertheless, the volatilisation, immobilisation, and dissolution of phosphorus (P) species have been neglected during PAAP of lignocellulose. Therefore, we compared the transformation of P species with direct-pyrolysis and PAAP system, using multiple techniques including gas chromatography tandem mass spectrometry (GCMS) and ³¹P nuclear magnetic resonance (NMR). It was also investigated that the properties of pyrogenic and modified carbons obtained from lignocellulose pyrolysis at 200-650 °C. As the temperature increased, volatile P species evolved into gas-phase during PAAP, inhibiting the formation of the macromolecular volatile components. Compared with pyrogenic carbons, modified carbons with more aromatic structures experienced a higher degree of dehydration and cyclisation via catalytic crosslinking reaction. PAAP system facilitated more generation of persistent free radical (PFR) below 500 °C and the attenuation of PFR signals was observed at 500-650 °C, which may be associated with the sequestration and elimination of P species between carbon matrix. Notably, three configurations of C₃PO, CPO, and COP were the major combinations of P and C elements on modified carbons. Increased gaseous P and decreased soluble P were observed with elevated temperatures in PAAP system. The species proportion of immobilised P clearly demonstrated the transformation of partial P species from inorganic to organic through pyrolysis. The immobilised P could serve as a potential sustained-release source participating in P biogeochemical cycles. These findings are fundamental for the technical design of lignocellulose pyrolysis.

Improvement of fungal extraction of phosphorus from sewage sludge ash by Aspergillus niger using sludge filtrate as nutrient substrate

Fungal extraction is a promising approach for reclaiming phosphorus (P) from sewage sludge ash (SSA). However, this approach faces notable technical and economic challenges, including an unknown P speciation evolution and the addition of expensive chemical organic carbon. In this study, the use of an organic-rich effluent produced in sludge dewatering as nutrient source is proposed to initiate the fungal extraction of SSA-borne P with Aspergillus niger. The changes in P speciation in the ash during fungal treatment was analyzed by combined sequential extraction, solid-state ³¹P nuclear magnetic resonance, and P X-ray absorption near edge spectroscopy. Results showed that after 5 days of fungal treatment using sludge-derived organics, 85 % of P was leached from SSA. Dominantly, this considerable release of P resulted from the dissolution of Ca₃(PO₄)₂, AlPO₄, FePO₄, and Mg₃(PO₄)₂ in the ash, and their individual contribution rates to P released accounted for 28.0 %, 24.3 %, 20.6 %, and 18.8 %, respectively. After removal of metal cations (e.g., Mg²⁺, Al³⁺, Fe³⁺, and heavy metals) by cation exchange resin (CER), a hydroxyapatite (HAP) product with a purity of > 85 % was harvested from the extract by precipitation with CaCl₂. By contrast, without CER purification, a crude product of Ca/Mg-carbonates and phosphates mixture were obtained from this extract. A total of 73.2 wt% of P was ultimately recovered from SSA through integrated fungal extraction, CER purification, and HAP crystallization. These findings provide a mechanistic basis for the development of waste management strategies for improved P reclamation with minimal chemical organics consumption.

Continuing progress in the field of two-dimensional correlation spectroscopy (2D-COS), part II. Recent noteworthy developments

This comprehensive survey review compiles noteworthy developments and new concepts of two-dimensional correlation spectroscopy (2D-COS) for the last two years. It covers review articles, books, proceedings, and numerous research papers published on 2D-COS, as well as patent and publication trends. 2D-COS continues to evolve and grow with new significant developments and versatile applications in diverse scientific fields. The healthy, vigorous, and diverse progress of 2D-COS studies in many fields strongly confirms that it is well accepted as a powerful analytical technique to provide an in-depth understanding of systems of interest.

Continuing progress in the field of two-dimensional correlation spectroscopy (2D-COS): Part III. Versatile applications

In this review, the comprehensive summary of two-dimensional correlation spectroscopy (2D-COS) for the last two years is covered. The remarkable applications of 2D-COS in diverse fields using many types of probes and perturbations for the last two years are highlighted. IR spectroscopy is still the most popular probe in 2D-COS during the last two years. Applications in fluorescence and Raman spectroscopy are also very popularly used. In the external perturbations applied in 2D-COS, variations in concentration, pH, and relative compositions are dramatically increased during the last two years. Temperature is still the most used effect, but it is slightly decreased compared to two years ago. 2D-COS has been applied to diverse systems, such as environments, natural products, polymers, food, proteins and peptides, solutions, mixtures, nano materials, pharmaceuticals, and others. Especially, biological and environmental applications have significantly emerged. This survey review paper shows that 2D-COS is an actively evolving and expanding field.

A review on the production of P-enriched hydro/bio-char from solid waste: Transformation of P and applications of hydro/bio-char

Phosphorus (P) is a necessary element for plant growth and animal health. Most P utilized by anthropogenic activities is released within the generation of various solid wastes such as sewage sludge, animal manure, and wetland plant, which increase the risk of water contamination. (Hydro)thermal treatment could be employed for solid waste treatment with the production of value-added hydro/bio-char, and the behavior of P during the thermochemical treatment process is critical for the further utilization of hydro/bio-char. This study provides a systematic review of the migration and transformation mechanisms of P during thermochemical treatment of various solid wastes, and special emphasis is given to the potential applications of P-enriched hydro/bio-char. Future challenges and perspectives in the thermal treatment of P-enriched solid waste are presented as well. The distribution and speciation of P were affected by feedstock properties, thermal technique, and reaction conditions, correspondingly affecting hydro/bio-char applications. The derived P-enriched hydro/bio-char was mainly applied as an agricultural soil amendment, P recovery source, and heavy metal sorbent, which could be adjusted by varying treatment process parameters. Additionally, potentially toxic substances, such as heavy metals in the solid waste, should be addressed during the production and application of hydro/bio-char. Overall, the production of P-enriched hydro/bio-char from solid waste is a promising route to simultaneously achieve P reclamation and solid waste treatment.

Development of phosphorus composite biochar for simultaneous enhanced carbon sink and heavy metal immobilization in soil

As a porous and carbon material, biochar is focused on respectively in sequestrating carbon and stabilizing metals in soil, while few studies attempted to design biochar for simultaneously achieving these two targets. This study proposed to produce phosphorus-composite biochar for synchronously enhancing carbon sequestration and heavy metals immobilization. Two phosphorus materials from tailings, Ca(H₂PO₄)₂ and Ca₅(PO₄)₃(OH), were selected as modifier to load into biomass prior to pyrolysis. Results showed that incorporating P not only increased pyrolytic C retention in biochar by 36.1-50.1%, but also obtained biochar with higher stability by chemically formation of COP, C-PO₃ and C₂-PO₂. After 90-day incubation with soil, more C was sequestrated in the P-biochar amended soil (59.6-67.0%) than those pristine biochar (43.2-46.6%). Highly soluble Ca(H₂PO₄)₂ was more efficient than Ca₅(PO₄)₃(OH) in this regard. Meanwhile, these P-composite biochar exhibited more Pb/Cd immobilization (31.3-92.3%) compared with the pristine biochar (9.5-47.2%), which was mainly due to the formation of stable precipitates Pb₅(PO₄)₃Cl and Cd₃(PO₄)₂, especially for Ca₅(PO₄)₃(OH) modification. Additionally, P-composite biochar "intelligently" altered soil microbial community, i.e., they suppressed Actinobacteria proliferation, which is correlated to carbon degradation, while promoted Proteobacteria growth, facilitating phosphate dissolution for ready reaction with heavy metals to form precipitate, benefiting the Pb and Cd immobilization. A dual functions biochar was engineered via simply loading phosphorous prior to pyrolysis and simultaneously enhanced carbon sequestration and heavy metal immobilization.

Assessing the efficiency and mechanism of zinc adsorption onto biochars from poultry litter and softwood feedstocks

The efficiency and adsorption mechanism of zinc removal was assessed in aqueous solution using four biochars from multiple biomass residues (poultry litter and three tree species). The effect of pH, kinetic effects, and isotherm fittings were investigated, as well as zinc-laden biochar using x-ray diffraction and absorption near edge structure. Sorbent load results showed softwood biochar exhibited the greatest zinc removal from both deionized (15 mg_Zn/L) and mining influenced river water (10 mg_Zn/L). The Langmuir isotherm was the best fit for the majority of the biochars. Exchangeable cations contributed most for the adsorption mechanism from the softwood biochars, while precipitation was greatest contribution for the poultry litter biochar. Overall, our results suggest that biochars from Douglas Fir trees are more efficient at removing zinc from aqueous solutions (up to 19.80 mg_Zn/g) compared to previously studied biochars (0.61 to 11.0 mg_Zn/g) and should be used for future remediation efforts.

Speciation Evolution of Phosphorus and Sulfur Derived from Sewage Sludge Biochar in Soil: Ageing Effects

Phosphorus (P) and sulfur (S) are usually involved simultaneously in the immobilization of heavy metals in sewage sludge during pyrolysis, and thus their speciation in sewage sludge-derived biochar (SSB) profoundly affects the recycling of the nutrients and the environmental risks of sewage sludge. Here, we investigated the speciation evolution of P and S in SSB induced by ageing processes in soil using X-ray absorption near edge structure spectroscopy. Results showed that Ca-bound compounds like hydroxyapatite dominated the P forms, while over 60% of S existed as reduced inorganic sulfides in the SSB. The stable Ca-associated P species in SSB tended to be transformed gradually into relatively soluble species during ageing in soil. The speciation composition of S in SSB remained almost unaffected when aged in pot soils, whereas about 33.6% of reduced sulfides were transformed into oxidized species after 1-year ageing in field soils. SSB significantly increased the proportion of sulfides and the contents of available P and S in the amended soil but showed relatively weak effects on the speciation distribution of P in the soil because of their similar compositions. These findings provide insights into biogeochemistry of nutrients and behaviors of heavy metals in SSB after its application to the soil environments.

Simultaneous recovery of phosphate and degradation of antibiotics by waste sludge-derived biochar

Recovery of phosphorus (P) from wastewater has led to growing public concern considering its scarcity and future availability as well as its detrimental environmental impacts. However, the recovered P is inevitably contaminated with co-existing antibiotics like tetracycline (TC) and sulfamethazine (SMT) which will pose serious risks to the health of human and animals after being spread to the environment. In this study, we propose a novel scheme that can recover P from synthetic wastewater and at the same time degrade the co-existing antibiotics. To achieve such a goal, a series of biochar (BC) were prepared from calcination of waste sludge and were used both as the adsorbent for P recovery and as the catalyst for peroxymonosulfate (PMS) activation and antibiotic degradation. Results showed that the sludge source (i.e. S_m: municipal sludge, S_p: paper mill sludge), calcination atmosphere (i.e. air-deficient, N₂, vacuum) and temperature (i.e. 600 and 800 °C) exhibited significant influence on P adsorption capacity. Generally, the BC calcined in N₂ showed better P uptake, and increase of calcination temperature from 600 °C to 800 °C could further improve P uptake. Though BC_p-N-600 (prepared from S_p in N₂ at 600 °C) showed faster and higher P uptake (56.3 mg/g) than its counterpart BC_m-N-600 (33.2 mg/g), BC_m-N-600 showed stronger catalytic activity and more stable performance in the complex pollutant system (P + SMT). It was proposed that P was recovered primarily through the chemisorption and precipitation mechanism, while SMT was nearly completely degraded primarily by the ROS generated from PMS activation.

Co-Pyrolysis of Sewage Sludge and Wetland Biomass Waste for Biochar Production: Behaviors of Phosphorus and Heavy Metals

Large amounts of sewage sludge (SS) and wetland plant wastes are generated in the wastewater treatment system worldwide. The conversion of these solid wastes into biochar through co-pyrolysis could be a promising resource utilization scheme. In this study, biochar was prepared by co-pyrolysis of SS and reed (Phragmites australis, RD) using a modified muffle furnace device under different temperatures (300, 500, and 700 °C) and with different mixing ratios (25, 50, and 75 wt.% RD). The physicochemical properties of biochar and the transformation behaviors of phosphorus (P) and heavy metals during the co-pyrolysis process were studied. Compared with single SS pyrolysis, the biochar derived from SS-RD co-pyrolysis had lower yield and ash content, higher pH, C content, and aromatic structure. The addition of RD could reduce the total P content of biochar and promote the transformation from non-apatite inorganic phosphorus (NAIP) to apatite phosphorus (AP). In addition, co-pyrolysis also reduced the content and toxicity of heavy metals in biochar. Therefore, co-pyrolysis could be a promising strategy to achieve the simultaneous treatment of SS and RD, as well as the production of value-added biochar.

Pyrolysis temperature-dependent carbon retention and stability of biochar with participation of calcium: Implications to carbon sequestration

Converting biomass waste into biochar by slow pyrolysis with subsequent soil amendment is a prospective approach with multiple environmental benefits including soil contamination remediation, soil amelioration and carbon sequestration. This study selected cow manure as precursor to produce biochar under 300 °C, 400 °C, 500 °C and 600 °C, and a remarkable promotion of carbon (C) retention in biochar by incorporation of exogenous Ca was achieved at all investigated pyrolysis temperatures. The C retention was elevated from 49.2 to 68.3% of pristine biochars to 66.1-79.7% of Ca-composite biochars. It was interesting that extent of this improvement increased gradually with rising of pyrolysis temperature, i.e., doping Ca in biomass promoted pyrolytic C retention in biochar by 16.6%, 23.4%, 29.1% and 31.1% for 300 °C, 400 °C, 500 °C and 600 °C, respectively. Thermogravimetric-mass spectrometer (TG-MS) and X-ray photoelectron spectroscopy (XPS) showed that Ca catalyzed thermal-chemical reactions and simultaneously suppressed the release of small organic molecular substances (C₂-C₇) via physical blocking (CaO, CaCO₃, and CaClOH) and chemical bonding (CO and OC-O). The catalyzation mainly occurred at 200-400 °C, while the suppression was more prominent at higher temperatures. Raman spectra and 2D FTIR analysis on biochar microstructure showed that presence of Ca had negative influence on carbon aromatization and thus weakened biochar's stability, while increasing pyrolysis temperature enhanced the stability of carbon structure. Finally, with integrating "C retention" during pyrolysis and "C stability" in biochar, the maximum C sequestration (56.3%) was achieved at 600 °C with the participation of Ca. The study highlights the importance of both Ca and pyrolysis temperature in enhancing biochar's capacity of sequestrating C.

A comparative study on phosphate removal from water using Phragmites australis biochars loaded with different metal oxides

Metal oxide-loaded biochars are a promising material to remove phosphate from polluted water to ultra-low concentrations. To facilitate preparing the metal oxide-loaded biochar with the best phosphate adsorption performance, five biochars loaded with Al, Ca, Fe, La and Mg oxides, respectively (Al-BC, Ca-BC, Fe-BC, La-BC and Mg-BC) were produced using Phragmites australis pretreated with 0.1 mol AlCl3, CaCl2, FeCl3, LaCl3 and MgCl2, respectively, characterized, and phosphate adsorption kinetics and isotherms of the biochars were determined. The maximum phosphate adsorption capacities (Qm ) of the biochars ranked as Al-BC (219.87 mg g-1) > Mg-BC (112.45 mg g-1) > Ca-BC (81.46 mg g-1) > Fe-BC (46.61 mg g-1) > La-BC (38.93 mg g-1). The time to reach the adsorption equilibrium ranked as La-BC (1 h) < Ca-BC (12 h) < Mg-BC (24 h) = Fe-BC (24 h) Collapse

Key Words

• adsorption rate
• biochar
• maximum adsorption capacity
• metal oxides
• phosphate removal and recovery

Collapse

MESH Headings Collapse

Grants

• Major Science and Technology Program for Water Pollution Control and Treatment
• Research Initiation Fund for Young Teachers of Beijing Technology and Business University

Collapse

Affiliation(s)

Pengfei Wang National Engineering Laboratory for Lake Pollution Control and Ecological Restoration, State Environment Protection Key Laboratory for Lake Pollution Control, Chinese Research Academy of Environmental Sciences, Beijing 100012, People's Republic of China
Mengmeng Zhi School of Environmental and Municipal Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, People's Republic of China
Guannan Cui School of Ecology and Environment, Beijing Technology and Business University, Beijing 100048, People's Republic of China
Zhaosheng Chu National Engineering Laboratory for Lake Pollution Control and Ecological Restoration, State Environment Protection Key Laboratory for Lake Pollution Control, Chinese Research Academy of Environmental Sciences, Beijing 100012, People's Republic of China
Shuhang Wang National Engineering Laboratory for Lake Pollution Control and Ecological Restoration, State Environment Protection Key Laboratory for Lake Pollution Control, Chinese Research Academy of Environmental Sciences, Beijing 100012, People's Republic of China

Collapse

Sustainable advances on phosphorus utilization in soil via addition of biochar and humic substances

The intervention of human in phosphorus pool seems to be a vicious circle. The rapid population growth leads to the global food shortage, which leads to the massive use of phosphate fertilizer and the continuous exploitation of phosphate rocks. With the massive loss and fixation of phosphate fertilizer in the soil, the unavailable phosphorus in the soil becomes superfluous, while the phosphate mineral resources turn to scarce. Interestingly, exogenous carbonaceous materials, notably, biochar and humic substances, have been widely used as soil conditioners in agricultural production up to date, among other actions to interfere with the balance between the different phosphate species, which offer effective roles for increasing soil available phosphorus. This article reviews the regulation mechanisms of biochar and humic substances on phosphorus availability and circulation, including improving soil physicochemical characteristics, regulating microbial community structure, and directly interacting with phosphorus to affect the fate of phosphorus in soil. Finally, the prospects for future research directions are made, and it is hoped that the review of this article can arouse people's attention to the current plight of agricultural production and provide some methods for improving the efficiency of phosphate fertilizer use in the future.

Applications of solid-state NMR spectroscopy in environmental science

Environmental science is an interdisciplinary field, which integrates chemical, physical, and biological sciences to study environmental problems and human impact on the environment. This article highlights the use of solid-state NMR spectroscopy (SSNMR) in studies of environmental processes and remediation with examples from both laboratory studies and samples collected in the field. The contemporary topics presented include soil chemistry, environmental remediation (e.g., heavy metals and radionuclides removal, carbon dioxide mineralization), and phosphorus recovery. SSNMR is a powerful technique, which provides atomic-level information about speciation in complex environmental samples as well as the interactions between pollutants and minerals/organic matter on different environmental interfaces. The challenges in the application of SSNMR in environmental science (e.g., measurement of paramagnetic nuclei and low-gamma nuclei) are also discussed, and perspectives are provided for the future research efforts.

Recent Progress in Biochar-Based Photocatalysts for Wastewater Treatment: Synthesis, Mechanisms, and Applications

Biochar (BC) is a carbon-rich material produced from pyrolysis of biomass. In addition to its low toxicity, environmental compatibility, and low cost, BC has the desired advantages of well-developed mesoporous structure and abundant surface functional groups. In recent years, BC-based photocatalysts (BCPs) have played a significant role in many environmental fields. In this paper, we highlight the current progress and several exciting results of BCPs by focusing on their synthesis, characterization, mechanisms, and applications in wastewater treatment. Details on various preparation methods include sol–gel, hydrothermal/solvothermal, ultrasound, calcination, and in situ methods are summarized and discussed. The underlying mechanisms and the applications of BCPs for different semiconductors are reviewed. Furthermore, some future trends and potentials are outlined.