Amino-Modified Fe-Terephthalate Metal-Organic Framework as an Efficient Catalyst for the Selective Oxidation of H2S

Graphitized Carbon-Supported Co@Co3O4 for Ozone Decomposition over the Entire Humidity Range

Ground-level ozone (O3) pollution has emerged as a significant concern due to its detrimental effects on human health and the ecosystem. Catalytic removal of O3 has proven to be the most efficient and cost-effective method. However, its practical application faces substantial challenges, particularly in relation to its effectiveness across the entire humidity range. Herein, we proposed a novel strategy termed "dual active sites" by employing graphitized carbon-loaded core-shell cobalt catalysts (Co@Co3O4-C). Co@Co3O4-C was synthesized via the pyrolysis of a Co-organic ligand as the precursor. By utilizing this approach, we achieved a nearly constant 100% working efficiency of the Co@Co3O4-C catalyst for catalyzing O3 decomposition across the entire humidity range. Physicochemical characterization coupled with density functional theory calculations elucidates that the presence of encapsulated metallic Co nanoparticles enhances the reactivity of the cobalt oxide capping layer. Additionally, the interface carbon atom, strongly influenced by adjacent metallic Co nuclei, functions as a secondary active site for the decomposition of O3 decomposition. The utilization of dual active sites effectively mitigates the competitive adsorption of H2O molecules, thus isolating them for adsorption in the cobalt oxide capping layer. This optimized configuration allows for the decomposition of O3 without interference from moisture. Furthermore, O3 decomposition monolithic catalysts were synthesized using a material extrusion-based three-dimensional (3D) printing technology, which demonstrated a low pressure drop and exceptional mechanical strength. This work provides a "dual active site" strategy for the O3 decomposition reaction, realizing O3 catalytic decomposition over the entire humidity range.

Special Issue "Design, Synthesis and Applications of Macroporous, Mesoporous, and Microporous Materials"

The intention of this Special Issue was to highlight the importance of the design, synthesis, and applications of macro-, meso-, and microporous materials [...].

A luminescent MOF-based nonenzymatic probe for colorimetric/photothermal/fluorescence triple-mode assay of uric acid in body fluids

Monitoring the levels of uric acid (UA) in body fluids is of great significance in the clinical diagnosis and therapy of related diseases. Herein, a novel nanocomposite R6G@Fe-MOF based nonenzymatic probe is presented to provide a ratiometric fluorescent, colorimetric, and photothermal triple read-out signal for the visual, sensitive, and convenient assay of UA. The framework structure of the in situ encapsulated R6G@Fe-MOF is found to decompose upon the addition of UA, resulting in the reduction of Fe3+ to Fe2+. This reduction will lead to a rapid increase in fluorescence emission (FL) at 430 nm. Simultaneously, the FL at 573 nm will decrease remarkably due to the inner filter effect (IFE) between UA and R6G@Fe-MOF. Furthermore, the reaction of the generated Fe2+ with potassium ferricyanide (K3 [Fe(CN)6]) can in situ generate Prussian blue (PBNPs) with outstanding color and photothermal properties, which allow for easy colorimetric and photothermal signal readout. The detection limits (LOD) for the colorimetric, fluorometric and photothermal detection are low at 1.68 μM, 0.236 μM, and 1.32 μM respectively. Ultimately, it is successfully employed to determine UA in urine, serum, and saliva, yielding satisfactory results. The constructed R6G@Fe-MOF sensor provides a simple, sensitive, and accurate determination of UA that can be tailored to meet the needs of various applications, and also provides new perspectives for the design and development of versatile sensors for diverse uses.

MOF-based catalysts: insights into the chemical transformation of greenhouse and toxic gases

Metal-organic framework (MOF)-based catalysts are outstanding alternative materials for the chemical transformation of greenhouse and toxic gases into high-add-value products. MOF catalysts exhibit remarkable properties to host different active sites. The combination of catalytic properties of MOFs is mentioned in order to understand their application. Furthermore, the main catalytic reactions, which involve the chemical transformation of CH4, CO2, NOx, fluorinated gases, O3, CO, VOCs, and H2S, are highlighted. The main active centers and reaction conditions for these reactions are presented and discussed to understand the reaction mechanisms. Interestingly, implementing MOF materials as catalysts for toxic gas-phase reactions is a great opportunity to provide new alternatives to enhance the air quality of our planet.

Enhanced adsorption and co-adsorption of heavy metals using highly hydrophilicity amine-functionalized magnetic hydrochar supported MIL-53(Fe)-NH2: performance, kinetics, and mechanism studies

It is a "kill two birds with one stone" method to convert invasive plants into hydrochar via hydrothermal carbonization as well as coinciding with 3R rules (reduction, recycling, and reuse). In this work, a series of hydrochars (pristine, modified, and composite) derived from invasive plants Alternanthera philoxeroides (AP) were prepared and applied to the adsorption and co-adsorption of heavy metals (HMs) such as Pb(II), Cr(VI), Cu(II), Cd(II), Zn(II), and Ni(II). The results show that MIL-53(Fe)-NH₂- magnetic hydrochar composite (M-HBAP) displayed a strong affinity for HMs, which the maximum adsorption capacities for HMs were 153.80 (Pb(II)), 144.77 (Cr(VI)), 80.58 (Cd(II)), 78.62 (Cu(II)), 50.39 (Zn(II)), and 52.83(Ni(II)) mg/g (c₀ = 200 mg/L, t = 24 h, T = 25 ℃, pH = 5,2,6,4,6,5). This may be because the doping of MIL-53(Fe)-NH₂ enhanced the surface hydrophilicity of hydrochar, which allows hydrochar to disperse in the water within 0.12 s and possessed excellent dispersibility compared with pristine hydrochar (BAP) and amine-functionalized magnetic modified hydrochar (HBAP). Furthermore, the BET surface area of BAP was improved from 5.63 to 64.10 m²/g after doing MIL-53(Fe)-NH₂. M-HBAP shows a strong adsorption effect on the single HMs system (52-153 mg/g), while it decreased significantly (17-62 mg/g) in the mixed HMs system due to the competitive adsorption. Cr(VI) can produce strong electrostatic interaction with M-HBAP, Pb(II) can react with CaC₂O₄ on the surface of M-HBAP for chemical precipitation, and other HMs can react with functional groups on the surface of M-HBAP for complexation and ion exchange. In addition, five adsorption-desorption cycle experiments and vibrating sample magnetometry (VSM) curves also proved the feasibility of the M-HBAP application.

Sensitive and selective impedimetric determination of TNT using RSM-CCD optimization

Detection of trace amounts of 2,4,6-Trinitrotoluene as a widely used explosive in the military and industrial sectors is of vital importance due to security and environmental concerns. The sensitive and selective measurement characteristics of the compound still is considered a challenge for analytical chemists. Unlike conventional optical and electrochemical methods, the electrochemical impedance spectroscopy technique (EIS), has a very high sensitivity, but it faces a significant challenge in that it requires complex and expensive steps to modify the electrode surface with selective agents. We reported the design and construction of an inexpensive, simple, sensitive, and selective impedimetric electrochemical TNT sensor based on the formation of a Meisenheimer complex between magnetic multiwalled carbon nanotubes modified with aminopropyl triethoxysilane (MMWCNTs @ APTES) and TNT. The formation of the mentioned charge transfer complex at the electrode-solution interface blocks the electrode surface and disrupts the charge transfer in [(Fe (CN) ₆)] ^3-/4- redox probe system. Charge transfer resistance changes (ΔR_CT) were used as an analytical response that corresponded to TNT concentration. To investigate the influence of effective parameters on the electrode response, such as pH, contact time, and modifier percentage, the response surface methodology based on central composite design (RSM-CCD) was used. The calibration curve was achieved in the range of 1-500 nM with a detection limit of 0.15 nM under optimal conditions, which included pH of 8.29, contact time of 479 s, and modifier percentage of 12.38% (w/w). The selectivity of the constructed electrode towards several nitroaromatic species was investigated, and no significant interference was found. Finally, the proposed sensor was able to successfully measure TNT in various water samples with satisfactory recovery percentages.

Photocatalytic Aerobic Oxidation of Biomass-Derived 5-HMF to DFF over MIL-53(Fe)/g-C3N4 Composite

A MIL-53(Fe)/g-C₃N₄ heterogeneous composite was synthesized and applied in photocatalytic oxidation of 5-hydroxymethylfurfural (5-HMF) to 2,5-diformylfuran (DFF). The systematic investigation indicated that the introduction of MIL-53(Fe) into g-C₃N₄ increased the specific surface area, broadened the visible-light response region, and promoted the separation efficiency of the photo-generated electron-hole pairs. The 10% MIL-53(Fe)/g-C₃N₄ heterogeneous composite achieved the best photocatalytic oxidation activity with 74.5% of 5-HMF conversion under simulated sunlight, which was much higher than that of pristine g-C₃N₄ and MIL-53(Fe). The MIL-53(Fe)/g-C₃N₄ composite displayed good photocatalytic reusability and stability. Based on the characterization results and photocatalytic performance, a Z-scheme photocatalytic mechanism of the MIL-53(Fe)/g-C₃N₄ composite was suggested, and a possible reaction route was deduced.

Controlling the Fe2O3-SiO2 interaction: The effect on the H2S selective catalytic oxidation and catalyst deactivation

Biogas utilization is one of the most promising options for reducing the consumption of fossil fuels for energy production, but the presence of H₂S represents a serious industrial and environmental problem. In this work, two different synthesis methods (sol-gel and incipient wetness impregnation) were used to synthesize iron oxide supported on silica catalysts (Fe₂O₃/SiO₂) with metal loadings ranging from 0.5 to 10 %wt. The catalysts were tested for the selective oxidation of H₂S, changing the operating conditions like O₂/H₂S (0.5-2.5), temperature (170-250°C), and water content (0-50%). The optimum condition was O₂/H₂S = 0.5 and no water at 230 °C with the conversion of approximately 100%, the selectivity of 97%, and the deactivation of 0.6%. A detailed characterization of the fresh and spent catalysts' surface revealed the presence of four deactivation mechanisms: metal surface reduction, oxygen vacancy loss, pore plugging, and sintering. Among the observed deactivation mechanisms, the sintering showed the highest impact on catalytic activity and deactivation. The sol-gel catalysts (SG) showed the highest metal-oxide/support interaction, which reduced the metal-oxide nanoparticles sintering compared with the incipient wetness impregnation method (IWI), reporting a lower sintering, higher activity, and selectivity, lower deactivation rates and lower sensitivity to the operating conditions. A catalytic cycle representing the possible surface intermediate states of the catalyst is proposed based on the performance and characterization results obtained.

Cell Membrane and V2C MXene-Based Electrochemical Immunosensor with Enhanced Antifouling Capability for Detection of CD44

The inactive adsorption and interference of biomolecules in electrochemical biosensors is a topic of intense interest. Directly utilizing native cell membranes to endow electrochemical surfaces with antifouling and biocompatible features is a promising strategy, rather than attempting to synthetically replicate complex biological interface properties. In this study, we present a facial and sensitive sandwich-type antifouling immunoassay through platelet membrane/Au nanoparticle/delaminated V₂C nanosheet (PM/AuNPs/d-V₂C)-modified electrode as the substrate of sensing interface and methylene blue/aminated metal organic framework (MB@NH₂-Fe-MOF-Zn) as an electrochemical signal probe. The biosensor perfectly integrates the high conductivity of AuNPs-loaded V₂C MXene with the excellent loading property of NH₂-Fe-MOF-Zn to improve the electrochemical sensing performance. In addition, the excellent antifouling properties of the homogeneous cell membrane can effectively prevent the non-specific adsorption of model proteins. The obtained antifouling biosensor possesses the capability of ultrasensitive detection of CD44 and CD44-positive cancer cell in complex liquids and exhibits good analytical performance for the analysis of CD44 with a linear range from 0.5 ng/mL to 500 ng/mL. This strategy of developing cell membrane-based biosensing systems with enhanced antifouling capability can be easily expanded to the construction of other complex biosensors, and the advanced biological probes and analytical methods provide a favorable means to accurately quantify biomarkers associated with tumor progression.

A review on sensitivity of operating parameters on biogas catalysts for selective oxidation of Hydrogen Sulfide to elemental sulfur

Hydrogen sulfide (H₂S) is a critical problem for biogas applications, such as electricity and heat generation, or the production of different chemical compounds, due to corrosion and toxic effluent gases. The selective catalytic oxidation of H₂S to S is the most promising way to eliminate H₂S from biogas due to the lack of effluents, therefore can be considered a green technology. The most extensively used catalysts for H₂S selective oxidation can be classified in two groups: metal oxide-based catalysts, including vanadium and iron oxides, and carbon-based catalysts. Numerous studies have been devoted to studying their different catalytic performances. For industrial applications, the most suitable catalysts should be less sensitive to the operating parameters like the temperature, O₂/H₂S ratio, and H₂O content. More specifically, for metal oxides and carbon-based catalysts, the temperature and O₂/H₂S ratio have a similar effect on the conversion and selectivity, but carbon-based catalysts are less sensitive to water in all operating conditions.

Comparative Study of Pd-Ni Bimetallic Catalysts Supported on UiO-66 and UiO-66-NH2 in Selective 1,3-Butadiene Hydrogenation

Selective hydrogenation of 1,3-butadiene (BD) is regarded as the most promising route for removing BD from butene streams. Bimetallic Pd-Ni catalysts with changed Pd/Ni molar ratios and monometallic Pd catalysts were synthesized using two differently structured metal-organic framework supports: UiO-66 and UiO-66-NH₂. The effects of the structure of support and the molar ratio of Pd/Ni on the catalytic property of selective BD hydrogenation were studied. The Pd-Ni bimetallic supported catalysts, PdNi/UiO-66 (1:1) and PdNi/UiO-66-NH₂ (1:1), exhibited fine catalytic property at low temperature. Compared with UiO-66, UiO-66-NH₂ with a certain number of alkaline sites could reduce the catalytic activity for the BD hydrogenation reaction. However, the alkaline environment of UiO-66-NH₂ is helpful to improve the butene selectivity. PdNi/UiO-66-NH₂ (1:1) catalyst presented better stability than PdNi/UiO-66 (1:1) under the reaction conditions, caused by the strong interaction between the -NH₂ groups of UiO-66-NH₂ and PdNi NPs. Moreover, the PdNi/UiO-66-NH₂ (1:1) catalyst presented good reproducibility in the hydrogenation of BD. These findings afford a beneficial guidance for the design and preparation of efficient catalysts for selective BD hydrogenation.

Insights into the mechanism of low-temperature H2S oxidation over Zn-Cu/Al2O3 catalyst

Odor pollution caused by toxic chemicals with low human olfactory thresholds, such as hydrogen sulfide (H₂S), has become a major cause of environmental grievance world-wide. Although the low-temperature (<180 °C) catalytic oxidation of H₂S using metal oxides has received widespread attention, desulfurization performance is not ideal. Herein, a series of Zn-Cu/Al₂O₃ catalysts were developed using an impregnation method based on the Al₂O₃ hydrophilicity and the effects of zinc loading on the catalyst physicochemical properties and performance were systematically studied. The catalysts were characterized using inductively coupled plasma-optical emission spectrometry (ICP-OES), N₂ adsorption-desorption isotherms, scanning electron microscopy with energy dispersive spectrometry (SEM-EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR) and electron paramagnetic resonance (EPR). It was found that optimization of zinc doping could improve the hydrophilicity of the catalyst, and hence its activity. Catalytic activity was also dependent on operational parameters such as temperature, humidity and space velocity. The Zn₃Cu₃ catalyst exhibited the highest breakthrough capacity of 353.91 mg/g at 50 °C and at a relative humidity of 50%. The excellent desulfurization performance was attributed to oxygen vacancies contributed by CuO, Cu₂O and ZnO, which facilitated the conversion of H₂O into hydroxyl radicals. Consequently, a hydroxyl radical-induced desulfurization mechanism over Zn-Cu/Al₂O₃ is proposed. This work provides a potential green and efficient catalyst for the selective oxidation of H₂S.

Bimetallic Metal-Organic Frameworks MIL-53(xAl-yFe) as Efficient Catalysts for H2S Selective Oxidation

Catalytic oxidation of H₂S is a crucial green pathway that can fully convert H₂S into value-added elemental S for commercial use. However, achieving high catalytic stability and S selectivity by traditional-metal-based catalysts still remain a major challenge. Herein, a facile one-step solvothermal strategy is designed for the fabrication of bimetallic MIL-53(xAl-yFe) catalysts. The as-synthesized MIL-53(1Al-5Fe) possesses ample coordinatively unsaturated metal sites, which served as efficient catalytic sites for the selective oxidation of H₂S. As a result, the representative MIL-53(1Al-5Fe) achieves a S yield of nearly 100% at 100-160 °C with almost no obvious decrease of catalytic stability in the run of 30 h. Under the defined reaction conditions, the bimetallic metal-organic frameworks are obviously superior to MIL-53(Al) (49.3%) and MIL-53(Fe) (70.5%) in S yield. This study suggests that the introduction of elemental Al into MIL-53(xAl-yFe) could effectively modulate the electronic properties and spatial configuration of the catalysts, further conducing the adsorption and activation of H₂S and thus accelerating the dissociation of H₂S into a key intermediate S* and improving their catalytic performance.

Selenite capture by MIL-101 (Fe) through FeOSe bonds at free coordination Fe sites

Selective immobilization of SeO₃^2- is highly desired for the remediation of Se-contaminated water. Thus, the irreversible sorption of SeO₃^2- ions by adsorbents through unique coordination bonds with high affinity is needed. Herein, we demonstrated that Fe-based metal-organic framework (MOF) (Fe-MIL-101) with free coordination sites (FCSs) enabled selective and irreversible capture of SeO₃^2- ions from aqueous solution with fast kinetics and a high uptake capacity of 183.7 mg∙g^-1, owing to large MOF apertures and substantial numbers of FCSs as capture sites through forming Fe-O-Se bonds. Meanwhile, Fe-MIL-101 maintained excellent performance in a broad pH range (4-11) and high selectivity for SeO₃^2- ions in the presence of excessive competitive anions (e.g., CO₃^2-, PO₄^3-). Density functional theory (DFT) calculation, extended X-ray absorption fine structure (EXAFS), and Mössbauer fittings confirmed that the capture on Fe-MIL-101 was through the Fe-O-Se coordination bonds between FCSs and SeO₃^2-. Moreover, Fe-MIL-101 could effectively remove SeO₃^2- in simulated natural water and sewage by overcoming the influence of co-existing ions and organic matters. This study highlights new opportunities for the design of MOF-based materials for removing toxic and radioactive anions with irreversibility and high selectivity from natural and waste water.

Engineering of crystal phase over porous MnO2 with 3D morphology for highly efficient elimination of H2S

In the present work, we report a facile oxalate-derived hydrothermal method to fabricate α-, β- and δ-MnO₂ catalysts with hierarchically porous structure and study the phase-dependent behavior for selective oxidation of H₂S over MnO₂ catalysts. It was disclosed that the oxygen vacancy, reducibility and acid property of MnO₂ are essentially determined by the crystalline phase. Systematic experiments demonstrate that δ-MnO₂ is superior in active oxygen species, activation energy and H₂S adsorption capacity among the prepared catalysts. As a consequence, δ-MnO₂ nanosphere with a hierarchically porous structure shows high activity and stability with almost 100% H₂S conversion and sulfur selectivity at 210 °C, better than majority of reported Mn-based materials. Meanwhile, hierarchically porous structure of δ-MnO₂ nanosphere alleviates the generation of by-product SO₂ and sulfate, promoting the adoptability of Mn-based catalysts in industrial applications.

Enzymatic Cascade Reactions Mediated by Highly Efficient Biomimetic Quasi Metal-Organic Frameworks

The integration of chemo- and enzymatic catalysis for effective multistep cascades has presented critical challenges for decades. In this work, the biomimetic quasi NH₂-MIL-101 (qNM) with highly efficient peroxidase-like activity was synthesized via a palmitic acid-induced strategy followed by pyrolysis. The effects of the amount of palmitic acid and calcination temperature on the synthesis of qNM were optimized. It was found that qNM was an excellent catalyst for oxidations of various peroxidase substrates, and a possible mechanism was proposed, i.e., the presence of Fe^II species in qNM was responsible for its excellent activity, which facilitated the transition between Fe^II and Fe^III species to produce more hydroxyl radicals by H₂O₂ decomposition. The qNM served as the potential matrix for enzyme immobilization through a cross-linking method, and kinetic studies revealed that the catalytic efficiency (k_cat/K_m) for the immobilized GOx (23.7 mM^-1 s^-1) is comparable to that of free GOx (26.9 mM^-1 s^-1). The immobilized GOx also showed improved stability against high temperatures and organic solvents compared to free GOx, and analysis of the secondary structure of GOx indicated that the improved stability resulted from enzyme rigidity by the intense covalent linkage with qNM. Furthermore, qNM contributed its biomimetic activity to cooperate with a single enzyme (GOx) or two enzymes (β-Gal and GOx) for the enzymatic cascade reactions. Compared with the mixture of each component in the solution, the combination of the single-enzyme system (GOx) or the two-enzyme system (β-Gal and GOx) in qNM achieved 2.67-fold and 1.83-fold enhancements in the activity of catalytic cascades, respectively. This study provides new insights into the construction of effective and synergistic cascade reactions by integrating biomimetic MOF with natural enzyme, which holds potential for applications in biotechnology and ecofriendly and biomimetic catalysis.

H2S Stability of Metal-Organic Frameworks: A Computational Assessment

The H₂S stability of a range of metal-organic frameworks (MOFs) was systematically assessed by first-principles calculations. The most likely degradation mechanism was first determined and we identified the rate constant of the degradation reaction as a reliable descriptor for characterizing the H₂S stability of MOFs. A qualitative H₂S stability ranking was thus established for the list of investigated materials. Structure-stability relationships were further envisaged considering several variables including the nature of the linkers and their grafted functional groups, the pore size, the nature of metal sites, and the presence/nature of coordinatively unsaturated sites. This knowledge enabled the anticipation of the H₂S stability of one prototypical MOF, e.g., MIL-91(Ti), which has been previously proposed as a good candidate for CO₂ capture. This computational strategy enables an accurate and easy handling assessment of the H₂S stability of MOFs and offers a solid alternative to experimental characterizations that require the manipulation of a highly toxic and corrosive molecule.

An electrochemical method for the sensitive and rapid sensing of Sudan I in food based on Ni–Fe bimetal organic frameworks

A Ni–Fe bimetal organic framework-modified electrode was constructed for the sensitive and rapid sensing of Sudan I in food.

In Situ Generation of Prussian Blue by MIL-53 (Fe) for Point-of-Care Testing of Butyrylcholinesterase Activity Using a Portable High-Throughput Photothermal Device

Butyrylcholinesterase (BuChE), the primary source of serum cholinesterase activity, is an indispensable biochemical marker for clinical diagnosis of liver function and organophosphorus poisoning. The requirement for bulky and expensive instruments represents a huge hindrance for point-of-care testing (POCT) of BuChE, especially in resource-limited settings. Herein, an easy-operated, economic, and portable photothermal (PT) biosensing platform for high-throughput BuChE detection was rationally designed. BuChE could "light up" the PT signal through in situ generation of Prussian blue (PB) by MIL-53 (Fe), which allowed us to translate biological signals into temperature signals. Such temperature change signals could be monitored at high throughput (six samples for a single measurement) by a miniature self-made integrated PT device via combining separable 96-well plates, a three-dimensional (3D) printed sample bracket, 808 nm lasers, and thermometers, satisfying the requirement for rapid on-site detection in a large batch with low cost. In addition, the large specific surface area, 3D network structure, and high porosity of MIL-53 (Fe) offered a beneficial platform for its reaction with enzymatic hydrolysate, resulting in high sensing sensitivity and low detection limit (0.3 U L^-1), which was at least 20 000 times lower than the normal human serum BuChE activity. This facile, affordable, and broad applicability PT sensing platform provides a beneficial reference for the rational design of other disease diagnostic approaches suitable for POCT.

Electrochemical determination of artemisinin based on signal inhibition for the reduction of hemin

A novel electrochemical sensor was constructed for the determination of artemisinin (ART) based on the inhibition of redox for hemin caused by ART. As far as we know, this strategy for ART determination may be proposed for the first time. In this work, untreated multi-walled carbon nanotubes were cast on the glassy carbon electrode (GCE) as conductive carrier. We prepared a bimetallic organic framework named FeGd-MOF and combined it with hemin by a simple physical mixed method. Then, we fabricated the working electrode by layer-by-layer modification and immobilization. The sensor measured by the differential pulse voltammetry (DPV) technique had calibration curves for the determination of ART, which was 0.3-350 μM with the correlation coefficient R² = 0.9998. Furthermore, the obtained linear range could be practically used in real sample analysis such as dried leaves of Artemisia apiacea. Under the optimized condition, the electrochemical sensor exhibited high sensitivity, good stability, and excellent anti-interference performance. The limit of detection (LOD) for this sensor was 0.17 μM (signal to noise ratio, S/N = 3), which was much lower than that for some other reported electrochemical sensors. The recovery rates were in the range of 99.54-104.34% in real samples, indicating that the sensor had good repetition and high accuracy. Graphical abstract.

Highly Active and Sulfur-Resistant Fe-N4 Sites in Porous Carbon Nitride for the Oxidation of H2 S into Elemental Sulfur

Iron-based catalysts have been widely studied for the oxidation of H₂ S into elemental S. However, the prevention of iron sites from deactivation remains a big challenge. Herein, a facile copolymerization strategy is proposed for the construction of isolated Fe sites confined in polymeric carbon nitride (CN) (Fe-CNNχ). The as-prepared Fe-CNNχ catalysts possess unique 2D structure as well as electronic property, resulting in enlarged exposure of active sites and enhancement of redox performance. Combining systematic characterizations with density functional theory calculation, it is disclosed that the isolated Fe atoms prefer to occupy four-coordinate doping configurations (Fe-N₄ ). Such Fe-N₄ centers favor the adsorption and activation of O₂ and H₂ S. As a consequence, Fe-CNNχ exhibit excellent catalytic activity for the catalytic oxidation of H₂ S to S. More importantly, the Fe-CNNχ catalysts are resistant to water and sulfur poisoning, exhibiting outstanding catalytic stability (over 270 h of continuous operation), better than most of the reported catalysts.

Determination of hydrogen peroxide released from cancer cells by a Fe-Organic framework/horseradish peroxidase-modified electrode

Multi-walled carbon nanotubes (MWCNTs) were used as conductive carrier on the glassy carbon electrode (GCE), and the hybrid of metal organic framework [NH₂-MIL-53(Fe)] and horseradish peroxidase (HRP) was prepared by simple physical mechanical mixture. The GCE modified by the above material with immobilization, namely NH₂-MIL-53(Fe)/HRP/MWCNTs/GCE, was used to construct an electrochemical biosensor toward H₂O₂. The results indicated that the addition of NH₂-MIL-53(Fe) had a good synergistic effect on the electron transfer of HRP and the detection of H₂O₂. Under the optimized condition, the biosensor exhibited excellent electrochemical performances such as low detection limit, high sensitivity, good stability and so on. The H₂O₂ biosensor showed two linear ranges of 0.1-1 μM and 1-600 μM with a calculated detection limit of 0.028 μM (signal-to-noise ratio, S/N = 3). In addition, the stability of the hybrid of NH₂-MIL-53(Fe) and HRP were discussed by SEM, XRD and UV-vis methods. Furthermore, the reported biosensors were practically used in direct detection of H₂O₂ released from HeLa and HepG2 cells successfully. Thus, this work provides a new strategy to fabricate electrochemical biosensors using MOFs and biomolecules.

Hydrogen Sulfide (H2S) Removal via MOFs

The removal of the environmentally toxic and corrosive hydrogen sulfide (H₂S) from gas streams with varying overall pressure and H₂S concentration is a long-standing challenge faced by the oil and gas industries. The present work focuses on H₂S capture using a relatively new type of material, namely metal-organic frameworks (MOFs), in an effort to shed light on their potential as adsorbents in the field of gas storage and separation. MOFs hold great promise as they make possible the design of structures from organic and inorganic units, but also as they have provided an answer to a long-term challenging objective, i.e., how to design extended structures of materials. Moreover, in designing MOFs, one may functionalize the organic units and thus, in essence, create pores with different functionalities, and also to expand the pores in order to increase pore openings. The work presented herein provides a detailed discussion, by thoroughly combining the existing literature on new developments in MOFs for H₂S removal, and tries to provide insight into new areas for further research.

Functionalization effects on HKUST-1 and HKUST-1/graphene oxide hybrid adsorbents for hydrogen sulfide removal

HKUST-1, a Cu-based metalorganic framework (MOF), was synthesized solvothermally, functionalized with polyethyleneimine (PEI), and hybridized with graphene oxide (GO) and functionalized GO for H₂S removal. MOF synthesis approach, molecular weight of amines, and the content of GO in the hybrid adsorbents were systematically varied. The adsorbent materials were characterized by XRD, FTIR, SEM, elemental analysis, liquid N₂ adsorption-desorption, water vapor and oxygen sorption, and subsequently tested for H₂S adsorption in a breakthrough column. The MOF in the composite adsorbents consisting of in-situ grown HKUST-1 on GO that was pre-functionalized with low molecular weight PEI exhibited the highest H₂S adsorption uptake at ambient conditions (0.9 mmol S g^-1 MOF) in comparison to 0.5 mmol S g^-1 MOF for the parent HKUST-1, thus showing an 80 % increase in uptake, while this material also exhibited significantly enhanced sorption kinetics. H₂S adsorption at higher temperature (150 °C) was also performed, and at this temperature a HKUST/GO hybrid adsorbent resulted in the highest MOF capacity, i.e. 2.1 mmol S g^-1 MOF, which is 27 % higher than that of the parent MOF at the same conditions. Formation of hybrid adsorbents with GO coupled to tunable functionalization of both GO support and the MOF crystallites can contribute in optimizing H₂S capture performance of MOFs.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

Iron-Based Metal-Organic Frameworks as Platform for H2S Selective Conversion: Structure-Dependent Desulfurization Activity

Three classical Fe-MOFs, viz., MIL-100(Fe), MIL-101(Fe), and MIL-53(Fe), were synthesized to serve as platforms for the investigation of structure-activity relationship and catalytic mechanism in the selective conversion of H₂S to sulfur. The physicochemical properties of the Fe-MOFs were characterized by various techniques. It was disclosed that the desulfurization performances of Fe-MOFs with well-defined microstructures are obviously different. Among these, MIL-100(Fe) exhibits the highest catalytic performance (ca. 100% H₂S conversion and 100% S selectivity at 100-180 °C) that is superior to that of commercial Fe₂O₃. Furthermore, the results of systematic characterization and DFT calculation reveal that the difference in catalytic performance is mainly because of discrepancy in the amount of Lewis acid sites. A plausible catalytic mechanism has been proposed for H₂S selective conversion over Fe-MOFs. This work provides critical insights that are helpful for rational design of desulfurization catalysts.

Unraveling the origin of the “Turn-On” effect of Al-MIL-53-NO2 during H2S detection

Real fluorophores were found in nitro-functionalized metal–organic frameworks for H₂S detection using a representative MOF, Al-MIL-53-NO₂.