Chemical Speciation, Plant Uptake, and Toxicity of Heavy Metals in Agricultural Soils

Enhanced reduction of Cd uptake by wheat plants using iron and manganese oxides combined with citrate in Cd-contaminated weakly alkaline arable soils

Iron (Fe) and manganese (Mn) oxides can be used to remediate Cd-polluted soils due to their excellent performance in heavy metal adsorption. However, their remediation capability is rather limited, and a higher content of available Mn and Fe in soils can reduce Cd accumulation in wheat plants due to the competitive absorption effect. In this study, goethite and cryptomelane were first respectively used to immobilize Cd in Cd-polluted weakly alkaline soils, and sodium citrate was then added to increase the content of available Mn and Fe content for further reduction of wheat Cd absorption. In the first season, the content of soil-available Cd and Cd in wheat plants significantly decreased when cryptomelane, goethite and their mixture were used as the remediation agents. Cryptomelane showed a better remediation effect, which could be attributed to its higher adsorption performance. The grain Cd content could be decreased from 0.35 mg kg-1 to 0.25 mg kg-1 when the content of cryptomelane was controlled at 0.5%. In the second season, when sodium citrate at 20 mmol kg-1 was further added to the soils with 0.5% cryptomelane treatment in the first season, the content of soil available Cd was increased by 14.8%, and the available Mn content was increased by 19.5%, leading to a lower Cd content in wheat grains (0.16 mg kg-1) probably due to the competitive absorption. This work provides a new strategy for the remediation of slightly Cd-polluted arable soils with safe and high-quality production of wheat.

Water-extractable metals as indicators of wheat metal accumulation: Insights from Cd, Pb, Mn, Cu, and Zn

There is a long-standing debate over the effectiveness of chemical extraction methods in assessing soil metal phytoavailability. This study addresses the limitations of widely-used chemical extraction methods and presents the water-extractable pool as a more reliable indicator based on wheat pot experiments using homogenized agricultural soil amended with lime materials, phosphate, and biochar. Over 120 days' pot experiments, Cd accumulation in whole wheat plants and tissues exhibited positive relationships with water-extractable Cd concentrations at heading and maturity stage (Spearman's rho: 0.521-0.851; P < 0.05), revealing that the water-extractable pool instead of other pools better indicates wheat metal accumulation. Water-extractable metal concentrations are effective in assessing phytoavailability of metals primarily in ionic forms in soil solution (e.g, Zn, Cd), but less reliable for metals strongly complexed with dissolved organic matter (DOM) or sensitive to redox conditions. It demonstrated that water-extractable metal concentrations and chemical forms are key factors, fundamentally determined by metal properties and impacted by environmental factors. This study clarifies a more direct link between chemical extraction and plant metal uptake mechanisms. Given the extensive application of chemical extraction methods over several decades, this study will help advance soil metal risk assessment and remediation practices.

Study on the migration behaviour of heavy metals at the improved mine soil-plant rhizosphere interface

With the increasing shortage of land resources and the aggravation of soil pollution in mining areas, the remediation of soil in abandoned mining areas has gradually attracted people's attention. The remediation of heavy metal contaminated soil in mining areas is the key to reduce the harm of heavy metals to the environment and human health. In this study, municipal sludge and phytoremediation technology were combined to investigate the migration and transformation of heavy metals at the soil-plant interface in improved mining areas through indoor pot experiments. The results showed that heavy metals in non-rhizosphere soil entered the rhizosphere environment with the growth of plants, leading to the increase of heavy metal content in rhizosphere soil. The cumulative amounts of Cu, Zn, Pb and Cd were 1299.32, 832.10, 347.89 and 71.34 mg/kg, respectively. The content of oxidized Cu and Zn decreased with increasing planting days, while the oxidized Pb and Cd showed an increasing trend. Under acidic conditions, H+ is easy to compete with heavy metal ions for exchangeable positions in the clay mineral layer, so that the reducible heavy metals are easy to be converted into exchangeable states. In this paper, the effects of various factors on the distribution of heavy metals were discussed by adjusting soil pH, adding humic acid and root exudates, so as to analyse the migration and transformation mechanism of heavy metals at the soil-plant interface, and provide a reliable theoretical basis for soil remediation in mining areas.

Pollution characteristics and source apportionment of heavy metal(loid)s in soil and groundwater of a retired industrial park

Heavy metal(loid)s (HMs) pollution has become a common and complex problem in industrial parks due to rapid industrialization and urbanization. Here, soil and groundwater were sampled from a retired industrial park to investigate the pollution characteristics of HMs. Results show that Ni, Pb, Cr, Zn, Cd, and Cu were the typical HMs in the soil. Source analysis with the positive matrix factorization model indicates that HMs in the topsoil stemmed from industrial activities, traffic emission, and natural source, and the groundwater HMs originated from industrial activities, groundwater-soil interaction, groundwater-rock interaction, and atmosphere deposition. The sequential extraction of soil HMs reveals that As and Hg were mainly distributed in the residue fraction, while Ni, Pb, Cr, Zn, Cd, and Cu mainly existed in the mobile fraction. Most HMs either in the total concentration or in the bioavailable fraction preferred to retain in soil as indicated by their high soil-water partitioning coefficients (Kd), and the Kd values were correlated with soil pH, groundwater redox potential, and dissolved oxygen. The relative stable soil-groundwater circumstance and the low active fraction contents limited the vertical migration of soil HMs and their release to groundwater. These findings increase our knowledge about HMs pollution characteristics of traditional industrial parks and provide a protocol for HMs pollution scrutinizing in large zones.

Bulk and Mapping Speciation Analyses Unveil the Pattern and Heterogeneity of Cu Species during Organic Waste Treatment

Organic wastes (OWs) can be a common source of copper (Cu) contamination of agricultural soils. Here we conducted a comprehensive study of 22 raw and treated OWs sampled at 6 different full-scale OW treatment plants. Bulk XANES analysis findings indicated that the Cu oxidation state was subject to changes throughout the OW treatment process, mostly depending on the anaerobic/aerobic conditions prevailing in each treatment stage. These changes were independent of the OW origin (agricultural, urban or industrial). Cu(I) prevailed in raw OWs and digestates (88-100%), whereas Cu(II) dominated in composts (46-100%). Bulk EXAFS analysis confirmed these observations and revealed that Cu(I) species in raw OWs and digestates consisted mainly of Cu(I)-sulfide (76-100%), while Cu(II) species (60-100%) in composts were Cu(II)-citrate, Cu(II)-carbonate and amorphous Cu(II)-phosphate. Interestingly, we observed that anaerobic digestion was conducive to the formation of crystallized Cu(I)-sulfides at the expense of nanosized and poorly crystalline Cu(I)-sulfide species, and that the recalcitrant Cu(I) species in composts was always crystallized Cu(I)-sulfide. XANES imaging analysis revealed Cu(II) species present in low proportions (2-4%) that were not detected using bulk XAS analysis in raw OWs and digestates. This demonstrated the potential of XANES imaging for probing minor species in complex matrices.

Microbial mediated remediation of heavy metals toxicity: mechanisms and future prospects

Heavy metal pollution has become a serious concern across the globe due to their persistent nature, higher toxicity, and recalcitrance. These toxic metals threaten the stability of the environment and the health of all living beings. Heavy metals also enter the human food chain by eating contaminated foods and cause toxic effects on human health. Thus, remediation of HMs polluted soils is mandatory and it needs to be addressed at higher priority. The use of microbes is considered as a promising approach to combat the adverse impacts of HMs. Microbes aided in the restoration of deteriorated environments to their natural condition, with long-term environmental effects. Microbial remediation prevents the leaching and mobilization of HMs and they also make the extraction of HMs simple. Therefore, in this context recent technological advancement allowed to use of bioremediation as an imperative approach to remediate polluted soils. Microbes use different mechanisms including bio-sorption, bioaccumulation, bioleaching, bio-transformation, bio-volatilization and bio-mineralization to mitigate toxic the effects of HMs. Thus, keeping in the view toxic HMs here in this review explores the role of bacteria, fungi and algae in bioremediation of polluted soils. This review also discusses the various approaches that can be used to improve the efficiency of microbes to remediate HMs polluted soils. It also highlights different research gaps that must be solved in future study programs to improve bioremediation efficency.

Recent trends in the phytoremediation of radionuclide contamination of soil by cesium and strontium: Sources, mechanisms and methods: A comprehensive review

This comprehensive review examines recent trends in phytoremediation strategies to address soil radionuclide contamination by cesium (Cs) and strontium (Sr). Radionuclide contamination, resulting from natural processes and nuclear-related activities such as accidents and the operation of nuclear facilities, poses significant risks to the environment and human health. Cs and Sr, prominent radionuclides involved in nuclear accidents, exhibit chemical properties that contribute to their toxicity, including easy uptake, high solubility, and long half-lives. Phytoremediation is emerging as a promising and environmentally friendly approach to mitigate radionuclide contamination by exploiting the ability of plants to extract toxic elements from soil and water. This review focuses specifically on the removal of 90Sr and 137Cs, addressing their health risks and environmental implications. Understanding the mechanisms governing plant uptake of radionuclides is critical and is influenced by factors such as plant species, soil texture, and physicochemical properties. Phytoremediation not only addresses immediate contamination challenges but also provides long-term benefits for ecosystem restoration and sustainable development. By improving soil health, biodiversity, and ecosystem resilience, phytoremediation is in line with global sustainability goals and environmental protection initiatives. This review aims to provide insights into effective strategies for mitigating environmental hazards associated with radionuclide contamination and to highlight the importance of phytoremediation in environmental remediation efforts.

Exploring Phytoremediation Potential: A Comprehensive Study of Flora Inventory and Soil Heavy Metal Contents in the Northeastern Mining Districts of Morocco

Mining activities produce waste materials and effluents with very high metal concentrations that can negatively impact ecosystems and human health. Consequently, data on soil and plant metal levels are crucial for evaluating pollution severity and formulating soil reclamation strategies, such as phytoremediation. Our research focused on soils and vegetation of a highly contaminated site with potentially toxic metals (Pb, Zn, and Cu) in the Touissit mining districts of eastern Morocco. Vegetation inventory was carried out in three mine tailings of the Touissit mine fields using the "field tower" technique. Here, 91 species belonging to 23 families were inventoried: the most represented families were Poaceae and Asteraceae, and the biological spectrum indicated a predominance of Therophytes (55.12%). From the studied areas, 15 species were selected and collected in triplicate on the tailings and sampled with their corresponding rhizospheric soils, and analyzed for Pb, Zn, and Cu concentrations. Reseda lutea, lotus marocanus, and lotus corniculatus can be considered as hyperaccumulators of Pb, as these plants accumulated more than 1000 mg·kg-1 in their aerial parts. According to TF, these plant species could serve as effective plants for Pb phytoextraction.

Integrated transcriptome and metabolomics analyses revealed key functional genes in Canna indica under Cr stress

Chromium (Cr) can interfere with plant gene expression, change the content of metabolites and affect plant growth. However, the molecular response mechanism of wetland plants at different time sequences under Cr stress has yet to be fully understood. In this study, Canna indica was exposed to 100 mg/kg Cr-contaminated soil for 0, 7, 14, and 21 days and analyzed using untargeted metabolomics (LC-MS) and transcriptomics. The results showed that Cr stress increased the activities of superoxide dismutase (SOD), ascorbate peroxidase (APX) and peroxidase (POD), the contents of glutathione (GSH), malondialdehyde (MDA), and oxygen free radical (ROS), and inhibited the biosynthesis of photosynthetic pigments, thus leading to changes in plant growth and biomass. Metabonomics analysis showed that Cr stress mainly affected 12 metabolic pathways, involving 38 differentially expressed metabolites, including amino acids, phenylpropane, and flavonoids. By transcriptome analysis, a total of 16,247 differentially expressed genes (DEGs, 7710 up-regulated genes, and 8537 down-regulated genes) were identified, among which, at the early stage of stress (Cr contaminate seven days), C. indica responds to Cr toxicity mainly through galactose, starch and sucrose metabolism. With the extension of stress time, plant hormone signal transduction and MAPK signaling pathway in C. indica in the Cr14 (Cr contaminate 14 days) treatment group were significantly affected. Finally, in the late stage of stress (Cr21), C. indica co-defuses Cr toxicity by activating its Glutathione metabolism and Phenylpropanoid biosynthesis. In conclusion, this study revealed the molecular response mechanism of C. indica to Cr stress at different times through multi-omics methods.

DNAzyme-activated CRISPR/Cas assay for sensitive and one-pot detection of lead contamination

Hazardous lead ions (Pb2+) even at a minute level can pose side effects on human health, highlighting the need for tools for trace Pb2+ detection. Herein, we present a DNAzyme-activated CRISPR assay (termed DzCas12T) for sensitive and one-pot detection of lead contamination. Using an extension-bridged strategy eliminates the need for separation to couple the DNAzyme recognition and CRISPR reporting processes. The tandem design endowed the DzCas12T assay with high specificity and sensitivity down to the pM-level. This assay has been used to detect lead contamination in food and water samples, indicating the potential for monitoring lead-associated environmental and food safety.

Exploration the interaction of cadmium and copper toxic effects in pakchoi (Brassica chinensis L) roots through combinatorial transcriptomic and weighted gene co-expression network analysis

The interaction between cadmium(Cd) and copper(Cu) during combined pollution can lead to more complex toxic effects on humans and plants.However, there is still a lack of sufficient understanding regarding the types of interactions at the plant molecular level and the response strategies of plants to combined pollution. To assess this, we investigated the phenotypic and transcriptomic patterns of pakchoi (Brassica chinensis L) roots in response to individual and combined pollution of Cd and Cu. The results showed that compared to single addition, the translocation factor of heavy metals in roots significantly decreased (p < 0.05) under the combined addition, resulting in higher accumulation of Cd and Cu in the roots. Transcriptomic analysis of pakchoi roots revealed that compared to single pollution, there were 312 and 1926 differentially expressed genes (DEGs) specifically regulated in the Cd2Cu20 and Cd2Cu100 combined treatments, respectively. By comparing the expression of these DEGs among different treatments, we found that the combined pollution of Cd and Cu mainly affected the transcriptome of the roots in an antagonistic manner. Enrichment analysis indicated that pakchoi roots upregulated the expression of genes involved in glucosetransferase activity, phospholipid homeostasis, proton transport, and the biosynthesis of phenylpropanoids and flavonoids to resist Cd and Cu combined pollution. Using weighted gene co-expression network analysis (WGCNA), we identified hub genes related to the accumulation of Cd and Cu in the roots, which mainly belonged to the LBD, thaumatin-like protein, ERF, MYB, WRKY, and TCP transcription factor families. This may reflect a transcription factor-driven trade-off strategy between heavy metal accumulation and growth in pakchoi roots. Additionally, compared to single metal pollution, the expression of genes related to Nramp, cation/H+ antiporters, and some belonging to the ABC transporter family in the pakchoi roots was significantly upregulated under combined pollution. This could lead to increased accumulation of Cd and Cu in the roots. These findings provide new insights into the interactions and toxic mechanisms of multiple metal combined pollution at the molecular level in plants.

Sources, effects and present perspectives of heavy metals contamination: Soil, plants and human food chain

Heavy metal (HM) poisoning of agricultural soils poses a serious risk to plant life, human health, and global food supply. When HM levels in agricultural soils get to dangerous levels, it harms crop health and yield. Chromium (Cr), arsenic (As), nickel (Ni), cadmium (Cd), lead (Pb), mercury (Hg), zinc (Zn), and copper (Cu) are the main heavy metals. The environment contains these metals in varying degrees, such as in soil, food, water, and even the air. These substances damage plants and alter soil characteristics, which lowers crop yield. Crop types, growing circumstances, elemental toxicity, developmental stage, soil physical and chemical properties, and the presence and bioavailability of heavy metals (HMs) in the soil solution are some of the factors affecting the amount of HM toxicity in crops. By interfering with the normal structure and function of cellular components, HMs can impede various metabolic and developmental processes. Humans are exposed to numerous serious diseases by consuming these affected plant products. Exposure to certain metals can harm the kidneys, brain, intestines, lungs, liver, and other organs of the human body. This review assesses (1) contamination of heavy metals in soils through different sources, like anthropogenic and natural; (2) the effect on microorganisms and the chemical and physical properties of soil; (3) the effect on plants as well as crop production; and (4) entering the food chain and associated hazards to human health. Lastly, we identified certain research gaps and suggested further study. If people want to feel safe in their surroundings, there needs to be stringent regulation of the release of heavy metals into the environment.

Impact of Heavy Metal Pollution in the Environment on the Metabolic Profile of Medicinal Plants and Their Therapeutic Potential

The paper provides a comprehensive examination of heavy metal stress on medicinal plants, focusing on its impact on antioxidant capacity and biosynthetic pathways critical to their therapeutic potential. It explores the complex relationship between heavy metals and the physiological and biochemical responses of medicinal plants, highlighting how metal stress disrupts biosynthetic pathways, altering concentrations of secondary metabolites. This disruption may compromise the overall quality and efficacy of medicinal plants, requiring a holistic understanding of its cumulative impacts. Furthermore, the study discusses the potential of targeted genetic editing to enhance plant resilience against heavy metal stress by manipulating genes associated with antioxidant defenses. This approach represents a promising frontier in safeguarding medicinal plants in metal-contaminated environments. Additionally, the research investigates the role of phytohormone signaling in plant adaptive mechanisms to heavy metal stress, revealing its influence on biochemical and physiological responses, thereby adding complexity to plant adaptation. The study underscores the importance of innovative technologies and global cooperation in protecting medicinal plants' therapeutic potential and highlights the need for mitigation strategies to address heavy metal contamination effectively.

Mitigation strategies for heavy metal toxicity and its negative effects on soil and plants

Heavy metal pollution threatens food security by accumulating in crops and soils, posing a significant challenge to modern agriculture due to its high toxicity. Urgent action is needed to restore affected agricultural fields. An efficient way to remove toxins is by bioremediation, which uses microorganisms. With the purpose of restoring soil in agriculture, this research attempts to assemble a consortium of microorganisms isolated from techno-genic soil. A number of promising strains, including Pseudomonas putida, Pantoea sp., Pseudomonas aeruginosa, Klebsiella oxytoca, and Agrobacterium tumefaciens were chosen based on their capacity to eliminate heavy metals from tests. Heavy metal removal (Cd, Hg, As, Pb, and Ni) and phytohormone production have been shown to be effective using consortiums (Pseudomonas aeruginosa, Klebsiella oxytoca, and Agrobacterium tumefaciens in a 1:1:2). In instances with mixed heavy-metal contamination, aeruginosa demonstrated efficacy because of its notable ability to absorb substantial quantities of heavy metals. The capacity of the cooperation to improve phytoremediation was investigated, with an emphasis on soil cleanup in agricultural areas. When combined with Sorghum bicolor L., it was able to remove roughly 16% As, 14% Hg, 32% Ni, 26% Cd, and 33% Pb from the soil.

Biospectroscopic fingerprinting phytotoxicity towards environmental monitoring for food security and contaminated site remediation

Human activities have resulted in severe environmental pollution since the industrial revolution. Phytotoxicity-based environmental monitoring is well known due to its sedentary nature, abundance, and sensitivity to environmental changes, which are essential preconditions to avoiding potential environmental and ecological risks. However, conventional morphological and physiological methods for phytotoxicity assessment mainly focus on descriptive determination rather than mechanism analysis and face challenges of labour and time-consumption, lack of standardized protocol and difficulties in data interpretation. Molecular-based tests could reveal the toxicity mechanisms but fail in real-time and in-situ monitoring because of their endpoint manner and destructive operation in collecting cellular components. Herein, we systematically propose and lay out a biospectroscopic tool (e.g., infrared and Raman spectroscopy) coupled with multivariate data analysis as a relatively non-destructive and high-throughput approach to quantitatively measure phytotoxicity levels and qualitatively profile phytotoxicity mechanisms by classifying spectral fingerprints of biomolecules in plant tissues in response to environmental stresses. With established databases and multivariate analysis, this biospectroscopic fingerprinting approach allows ultrafast, in situ and on-site diagnosis of phytotoxicity. Overall, the proposed protocol and validation of biospectroscopic fingerprinting phytotoxicity can distinguish the representative biomarkers and interrogate the relevant mechanisms to quantify the stresses of interest, e.g., environmental pollutants. This state-of-the-art concept and design broaden the knowledge of phytotoxicity assessment, advance novel implementations of phytotoxicity assay, and offer vast potential for long-term field phytotoxicity monitoring trials in situ.

Liquid-Phase Cyclic Chemiluminescence for the Identification of Cobalt Speciation

Accurate discrimination of metal species is a significant analytical challenge. Herein, we propose a novel methodology based on liquid-phase cyclic chemiluminescence (CCL) for the identification of cobalt speciation. The CCL multistage signals (In) of the luminol-H2O2 reaction catalyzed by different cobalt species have different decay coefficients k. Thereby, we can facilely identify various cobalt species according to the distinguishable k values, including the complicated and structurally similar cobalt complexes, such as analogues of [Co(NH3)5X]n+ (X = Cl-, H2O, and NH3), Co(II) porphyrins, and bis(2,4-pentanedione) cobalt(II) derivatives. Especially, the number of substituent atoms also influences the k value greatly, which allows excellent discrimination between complexes that only have a subtle difference in the substituent group. In addition, linear discriminant analysis based on In provides a complementary solution to improve the differentiating ability. We performed density functional theory calculations to investigate the interaction mode of H2O2 over cobalt species. A close negative correlation between the adsorption energy and the k value is observed. Moreover, the calculation of energy evolutions of H2O2 decomposition into a double hydroxide radical shows that a high level of consistency exists between the activation energy barrier and the k value. The results further demonstrate that the decay coefficient of the CCL multistage signal is associated with the catalytic reactivity of the cobalt species. Our work not only broadens the application of chemiluminescence but also provides a complementary technology for speciation analysis.

Organic fertilizer type and dose affect growth, morphological and physiological parameters, and mineral nutrition of watermelon seedlings

Background

Organic agriculture has grown rapidly in recent years due to its environmental friendliness, sustainability, and improved farm profitability. Transplants are commonly used for fruits and vegetables to achieve consistent quality, uniformity, and easy field spacing control. The efficacy and optimal amounts of fertilizers for organic transplant production need to be investigated.

Methods

The effects of three organic fertilizers (Sustane 4-6-4, Nature Safe 7-7-7, and Dramatic 2-4-1) and one conventional fertilizer Peters Professional 20-20-20 (Conventional) with four doses (nitrogen (N) content was matched among fertilizers in each level, as 0.14 g/L, 0.28 g/L, 0.56 g/L, and 0.84 g/L N, respectively) on watermelon seedlings were compared in this study.

Results

The results showed that all organic fertilizer treatments were not significantly different from the Conventional group in terms of watermelon germination. The only exception was the highest dose of Sustane 4-6-4 (0.84 g/L N) which decreased the germination rate and relative emergence index. Generally, growth index, shoot fresh and dry weights, true leaf number, and stem diameter increased as the amount of N increased within each fertilizer type. The best shoot growth was observed in the highest doses of Conventional and Dramatic 2-4-1 treatments (0.84 g/L N). However, Dramatic 2-4-1 treatments resulted in the lowest root growth when compared to other fertilizers at the same N dose. The second highest fertilization dose (0.56 g/L N) of Sustane 4-6-4 had the best root growth according to root fresh weight, root volume, root area, total root length, as well as the numbers of root tip and crossing when compared to other treatments. For seedlings, a well-developed root system can ensure a good seedling establishment and high survival rate under stressful field conditions after transplanting. Thus, Sustane 4-6-4 at 14 g/L (0.56 g/L N) is recommended to produce high-quality organic watermelon seedlings among the treatments applied in this study.

Inoculation of cadmium-tolerant bacteria to regulate microbial activity and key bacterial population in cadmium-contaminated soils during bioremediation

The perennial ryegrass Lolium perenne can be used in conjunction with cadmium (Cd)-tolerant bacteria such as Cdq4-2 (Enterococcus spp.) for bioremediation of Cd-contaminated soil. In this study, a theoretical basis was provided to increase the efficiency of L. perenne remediation of Cd-contaminated soil using microorganisms to maintain the stability of the soil microbiome. The experimental design involved three treatment groups: CK (soil without Cd addition) as the control, 20 mg·kg-1 Cd-contaminated soil, and 20 mg·kg-1 Cd-contaminated soil + Cdq4-2, all planted with L. perenne. The soil was collected on day 60 to determine the soil microbial activity and bacterial community structure and to analyze the correlation between soil variables, the bacterial community, available Cd content in the soil, Cd accumulation, and L. perenne growth. The soil microbial activity and bacterial community diversity decreased under Cd stress, and the soil microbial community composition was changed; while inoculation with Cdq4-2 significantly increased soil basal respiration and the activities of urease, invertase, and fluorescein diacetate (FDA) hydrolase by 83.65%, 79.72%, 19.88%, and 96.15% respectively; and the stability of the community structure was also enhanced. The Actinobacteriota biomass, the amount of available Cd, and the above- and belowground Cd content of L. perenne were significantly negatively correlated with the total phosphorus, total potassium, and pH. The activity of urease, invertase, and FDA hydrolase were significantly positively correlated with the biomasses of Acidobacteriota and L. perenne and significantly negatively correlated with the Chloroflexi biomass. Further, the available soil Cd content and the above- and belowground Cd levels of L. perenne were significantly positively correlated with the Actinobacteriota biomass and significantly negatively correlated with the Gemmatimonadetes biomass. Overall, inoculating Cd-tolerant bacteria improved the microbial activity, diversity, and abundance, and changed the microbial community composition, facilitating the remediation of Cd-contaminated soil by L. perenne.

Exploring the accumulation capacity of dominant plants based on soil heavy metals forms and assessing heavy metals contamination characteristics near gold tailings ponds

Heavy metal contamination of soil commonly accompanies problems around gold mine tailings ponds. Fully investigating the distribution characteristics of heavy metals and the survival strategies of dominant plants in contaminated soils is crucial for effective pollution management and remediation. This study aims to investigate the contamination characteristics, sources of heavy metals (As, Cd, Pb, Hg, Cu, Zn, Cr, and Ni) in soils around gold mine tailings ponds areas (JHH and WZ) and to clarify the form distribution of heavy metals (As, Cd, Pb, Hg) in contaminated plots as well as their accumulation and translocation in native dominant plants. The results of the study showed that the concentrations of As, Pb, Cd, Cu, and Zn in soil exceeded the national limits at parts of the sampling sites in both study areas. The Nemerow pollution index showed that both study areas reached extreme high pollution levels. Spatial analysis showed that the main areas of contamination were concentrated around metallurgical plants and tailings ponds, with Cd exhibiting the most extensive area of contamination. In the JHH, As (74%), Cd (66%), Pb (77%), Zn (47%) were mainly from tailings releases, and Cu (52%) and Hg (51%) were mainly from gold ore smelting. In the WZ, As (42%), Cd (41%), Pb (73%), Cu (47%), and Zn (41%) were mainly from tailings releases. As, Cd, Pb, and Hg were mostly present in the residue state, and the proportion of water-soluble, ion-exchangeable, and carbonate-bound forms of Cd (19.93%) was significantly higher than that of other heavy metals. Artemisia L. and Amaranthus L. are the primary dominating plants, which exhibited superior accumulation of Cd compared to As, Pb, and Hg, and Artemisia L. demonstrated a robust translocation capacity for As, Pb, and Hg. Compared to the concentrations of other forms of soil heavy metals, the heavy metal content in Artemisia L correlates significantly better with the total soil heavy metal concentration. These results offer additional systematic data support and a deeper theoretical foundation to bolster pollution-control and ecological remediation efforts in mining areas.

Combining Cd and Pb isotope analyses for heavy metal source apportionment in facility agricultural soils around typical urban and industrial areas

Facility agriculture enhances food production capabilities. However, concerns persist regarding heavy metal accumulation resulting from extensive operation of this type of farming. This study integrated the total content, five fractions, and isotope composition of Cd and Pb in intensively farmed soils in regions characterized by industrialization (Shaoguan, SG) and urbanization (Guangzhou, GZ), to assess the sources and mechanisms causing metals accumulation. We found significantly more severe Cd/Pb accumulation and potential mobility in SG than GZ. Cd displayed higher accumulation levels and potential mobility than Pb. The distinct isotopic signals in SG (-0.54 to 0.47‰ for δ114/110Cd and 1.1755 to 1.1867 for 206Pb/207Pb) and GZ (-0.86 to 0.12‰ for δ114/110Cd and 1.1914 to 1.2012 for 206Pb/207Pb) indicated significant differences in Cd/Pb sources. The Bayesian model revealed that industrial activities and related transportation accounted for over 40% and approximately 30%, respectively, of the average contributions of Cd/Pb in SG. While urban-related (26.6%) and agricultural-related (26.3%) activities primarily contributed to Cd in GZ. The integration of δ114/110Cd and 208Pb/206Pb has further enhanced the regional contrast in sources. The present study established a comprehensive tracing system for Cd-Pb, providing crucial insights into the accumulation and distribution of these metals in facility agricultural soils.

Optical Chemosensors Synthesis and Appplication for Trace Level Metal Ions Detection in Aqueous Media: A Review

In recent years, the development of optical chemosensors for the sensitive and selective detection of trace level metal ions in aqueous media has garnered significant attention within the scientific community. This review article provides a comprehensive overview of the synthesis strategies and applications of optical chemosensors dedicated to the detection of metal ions at low concentrations in water-based environments. The discussion encompasses a wide range of metal ions, including but not limited to heavy metals, transition metals, and rare earth elements, emphasizing their significance in environmental monitoring, industrial processes, and biological systems. The review explores into the synthesis methodologies employed for designing optical chemosensors, discovering diverse materials like organic dyes, nanoparticles, polymers, and hybrid materials. Special attention is given to the design principles that enable the selective recognition of specific metal ions, highlighting the role of ligand chemistry, coordination interactions, and structural modifications. Furthermore, the article thoroughly surveys the analytical performance of optical chemosensors in terms of sensitivity, selectivity, response time, and detection limits. Real-world applications, including water quality assessment, environmental monitoring, and biomedical diagnostics, are extensively covered to underscore the practical relevance of these sensing platforms. Additionally, the review sheds light on emerging trends, challenges, and future prospects in the field, providing insights into potential advancements and innovations. By synthesizing the current state of knowledge on optical chemosensors for trace level metal ions detection. The collective information presented herein not only offers a comprehensive understanding of the existing technologies but also inspires future research endeavors to address the evolving demands in the realm of trace metal ion detection.

Cadmium accumulation in brown rice (Oryza sativa L.) depends on environmental factors and nutrient transport: A three-year field study

Cadmium (Cd) accumulation in brown rice is a complex process in agroecosystems and is influenced by multiple factors, such as climate, soil properties, and nutrient transport. However, during the Cd transport process (soil-root-straw-brown rice), it remains unclear how Cd concentration in brown rice (BCd) is causal relationship to environmental factors and nutrient transport. The differences in precipitation, soil properties, nutrient transport, and Cd transport were studied through a three-year fixed-point field trial and linked them to the standard of Cd and nutrient absorption and transport processes. The results showed that the available Cd concentration (ACd), and BCd in 2020 were lower than those in 2019 and 2021, but monthly precipitation (MP) was higher in 2020 than in 2019 and 2021. The MP and niche metrics were significantly negatively associated with ACd and BCd. However, the relationship between the form and location of different nutrient elements and Cd in roots, Cd in straws, and BCd also varied during the transport of nutrient elements and Cd from soil to root to straw to brown rice. Structural equation modelling analysis showed that nitrogen (N 15.5 %), phosphorus (P 14.1 %), silicon (Si 4.2 %), and iron (Fe 7.6 %) transport were more closely related to BCd than to potassium (K), calcium (Ca), magnesium (Mg), and manganese (Mn). The increase in MP significantly inhibited the increase in BCd, whereas the MP led to a decrease in BCd by affecting the transport of N and Fe. Among them, Si, Fe, and BCd had indirect causal relationships, whereas N, P, and BCd had direct causal relationships. Particularly, P is a crucial nutrient in reducing BCd in the Cd transport process. Our results highlight a strong causal relationship between environmental factors and nutrient transport and BCd, and provide a theoretical basis for fertiliser application in Cd-contaminated agroecosystems.

Sugarcane mill mud-induced putative host (soybean (Glycine max))-rhizobia symbiosis in sandy loam soil

Domestic production of controlled-release, compost-based, and microbe-enhanced fertilizers is being expanded in the U.S. as a part of rural development. Sugarcane mill mud is a sterilized (≈90°C) agricultural byproduct in surplus that has received interests as a soil amendment in several Southern states, because of its high phosphorus and organic carbon contents. Addition of mill mud to sandy loam significantly increased the nodule formation compared to fertilized and unfertilized controls. Mill mud addition also resulted in pod yields similar to the fertilized control. Though not found in mill mud itself, mill mud additions correlated with an increase in soil Rhizobia as determined by deep 16S rRNA gene sequencing. We hypothesize that Firmicutes in sterilized mill mud induced Rhizobia that in turn enhanced soybean (Glycine max) growth. Collectively, mill mud enhanced the plant growth promoting bacteria when applied to a silt loam, although the relative influence of mill mud-derived bacteria, organic carbon, and nutrients is yet to be determined.

Simultaneous detection of mercury and cadmium ions: A colorimetric method in aqueous media

Hg and Cd are the two most toxic heavy metal ions that could be found in aqueous solutions. In this study, a chemosensor based on 5-(4-((4-nitrophenyl) diazenyl) phenyl)-1,3,4-oxadiazole-2-thiol (DOT) was reported to detect these ions simultaneously. DOT showed high selectivity towards Hg ion by changing the color of the solution from beige to gold-yellow at different concentrations of Hg ion. In comparison, other relevant metals, such as Li+, Na+, K+, Cs+, Mg2+, Ca2+, Al3+, Fe2+, Ag+, Cu2+, Pb2+, Ni2+, Zn2+, Cr3+, Fe3+, Pb4+, Mn2+, and Cd2+ did not affect the color of the DOT solution as the interfering ions. Despite no changes in the color of DOT solution in the presence of Cd ion, a solution containing DOT-Hg complex was changed from gold-yellow to orange by adding Cd ion, providing an approach for detecting Hg and Cd ion simultaneously with UV-Vis and Fluorescent spectroscopy. DOT exhibited a high association constant with a detection limit of 0.05 μM for Hg and Cd ions in an aqueous solution. The results of quantum mechanics (QM) calculations were also consistent with the experimental observations, which indicated that changes in the band gap could explain the various colors of DOT complex with metal ions.

Enhanced cadmium phytoextraction efficiency of ryegrass (Lolium perenne L.) by porous media immobilized Enterobacter sp. TY-1

Although studies on immobilized microorganisms have been conducted, their performance remains unclear for enhancing plants to remediate cadmium (Cd)-contaminated soil. In this study, a Cd-resistant strain TY-1 with good plant growth promotion traits was immobilized by biochar (BC) or oyster shell (OS) power to strengthen ryegrass to remediate Cd-contaminated soil. SEM-EDS combined with FTIR showed that TY-1 could tolerate Cd toxicity by surface precipitation, and functional groups such as hydroxyl and carbonyl groups might be involved. In the biocomposite treatments, soil pH increased, and the activity of fertility-related enzymes such as dehydrogenase increased by 109.01%-128.01%. The relative abundance of genus Saccharimonadales decreased from 7.97% to 3.35% in BS-TY and 2.61% in OS-TY, respectively. Thus, a suitable environment for ryegrass growth was created. The fresh weight, dry weight, plant height and Cd accumulation of ryegrass in TY treatment increased by 122.92%, 114.81%, 42.08% and 8.05%, respectively, compared to the control. Cd concentration in ryegrass was further increased in BC-TY and OS-TY by 24.14% and 40.23%, respectively. The improvement in soil microcosm and plant biomass forms an ongoing virtuous cycle, demonstrating that using carrier materials to improve the efficiency of microbial-assisted phytoremediation is realistic and feasible.

Association of urinary heavy metal combined exposure with periodontitis among US adults from NHANES 2011-2014

Some heavy metals are associated with periodontitis; whereas most of these associations have focused on individual metal, there are no specific studies on the effects of combined heavy metal exposure on periodontitis. We conducted an analysis on the association between urinary heavy metal exposure and periodontitis in participants aged 30 years and older using multiple logistic regression and Bayesian kernel machine regression (BKMR). This analysis was performed on data from the National Health and Nutrition Examination Survey from 2011 to 2014. The study found that using logistic regression, the 4th quartile of urinary lead and molybdenum and the 3rd quartile of urinary strontium were positively associated with periodontitis compared to the reference quartile after adjusting for covariates. Odds ratio (OR) with 95% confidence interval (CI) was 1.738 (1.069-2.826), 1.515 (1.025-2.239), and 1.498 (1.010-2.222), respectively. The 3rd and 4th quartiles of urinary cobalt were negatively associated with periodontitis, and their ORs and 95% CIs were 0.639 (0.438-0.934) and 0.571 (0.377-0.964), respectively. The BKMR model showed that urinary barium, lead, and molybdenum were positively associated with periodontitis in a range of concentrations and urinary cobalt, manganese, tin, and strontium were negatively correlated with periodontitis. Furthermore, the overall association between urinary heavy metals and periodontitis was positive. Our study provides evidence for an association between exposure to multiple urinary heavy metals and periodontitis. However, further longitudinal studies are needed to explore the specific mechanisms involved.

Mechanochemical synthesis of cysteine-gum acacia intermolecular complex for multiple metal(loid) sequestration from herbal extracts

The ubiquitous heavy metal(loid)s (HMs) contamination has triggered great concern about food safety, while sequestration and separation of trace HMs from herbal extracts still calls for appropriate sorbent materials. In this work, gum acacia was modified by cysteine to form a cysteine-acacia intermolecular complex (Cys-GA complex) via facile mechanochemical synthesis, aiming at capturing multiple HMs simultaneously. Preliminary screening confirms the superiority of Cys-CA complex for both cationic and anionic HMs, and determines an optimum Cys/GA mass ratio of 9:1 to achieve high removal capacities for Pb(II) (938 mg g-1), Cd(II) (834 mg g-1), As(V) (496 mg g-1), and Cr(VI) (647 mg g-1) in simulated aqueous solution. The analysis on HMs-exhausted Cys-GA complex indicates that Pb(II), As(V), and Cr(VI) tend to be removed through chelation, electrostatic attraction, and reduction, while Cd(II) can only be chelated or adsorbed by electrostatic interaction. The batch experiments on commercial herbal (e.g. Panax ginseng, Glycine max, Sophora flavescens, Gardenia jasminoides, Cyclocarya paliurus, and Bamboo leaf) extracts indicate that Cys-GA complex can reduce HMs concentration to attain acceptable level that comply with International Organization for Standardization, with negligible negative effect on its active ingredients. This work provides a practical and convenient strategy to purify HMs-contaminated foods without introducing secondary pollution.

A review on the fate and effects of contaminants in biosolids applied on land: Hazards and government regulatory policies

The increase in world population growth and its resultant increase in industrial production to meet its need, have continued to raise the volume of wastewater received by treatment plant facilities. This has expectedly, led to an upsurge in the volume of sewage sludge and biosolids generated from wastewater treatment systems. Biosolids are best managed by application on land because of their agronomic benefits. However, this usage has been discovered to negatively affect humans and impact the environment due to the accumulation of minute concentrations of contaminants still present in the biosolid after treatment, hence the need for government regulations. This review article examined the fate and effects of pollutants, especially persistent organic pollutants (PoPs) of concern and emerging contaminants found in biosolids used for land applications, and also discussed government regulations on biosolid reuse from the perspectives of the two major regulations governing biosolid land application-the EU's Sludge Directive and USEPA's Part 503 Rule, in an attempt to draw attention to their outdated contents since enactment, as they do not currently meet the challenges of biosolid land application and thus, require a comprehensive update. Any update efforts should focus on USEPA's Part 503 Rule, which is less stringent on the allowable concentration of biosolid pollutants. Furthermore, an update should include specific regulations on new and emerging contaminants and persistent organic pollutants (PoPs) such as microplastics, pharmaceutical and personal care products (P&PCPs), surfactants, endocrine-disrupting chemicals, flame retardants, pathogens, and organic pollutants; further reduction of heavy metal standard limits, and consideration of soil phosphate-metal interactions to regulate biosolid agronomic loading rate. Future biosolid research should focus on the concentration of TCS, TCC, and emerging pharmaceuticals, as well as Microplastic transport in biosolid-amended soils, soil-plant transfer mechanism, and metabolism of PFAs in the soils; all of which will inform government policies on biosolid application on land.

Insights into heavy metal tolerance mechanisms of Brassica species: physiological, biochemical, and molecular interventions

Heavy metal (HM) contamination of soil due to anthropogenic activities has led to bioaccumulation and biomagnification, posing toxic effects on plants by interacting with vital cellular biomolecules such as DNA and proteins. Brassica species have developed complex physiological, biochemical, and molecular mechanisms for adaptability, tolerance, and survival under these conditions. This review summarizes the HM tolerance strategies of Brassica species, covering the role of root exudates, microorganisms, cell walls, cell membranes, and organelle-specific proteins. The first line of defence against HM stress in Brassica species is the avoidance strategy, which involves metal ion precipitation, root sorption, and metal exclusion. The use of plant growth-promoting microbes, Pseudomonas, Psychrobacter, and Rhizobium species effectively immobilizes HMs and reduces their uptake by Brassica roots. The roots of Brassica species efficiently detoxify metals, particularly by flavonoid glycoside exudation. The composition of the cell wall and callose deposition also plays a crucial role in enhancing HMs resistance in Brassica species. Furthermore, plasma membrane-associated transporters, BjCET, BjPCR, BjYSL, and BnMTP, reduce HM concentration by stimulating the efflux mechanism. Brassica species also respond to stress by up-regulating existing protein pools or synthesizing novel proteins associated with HM stress tolerance. This review provides new insights into the HM tolerance mechanisms of Brassica species, which are necessary for future development of HM-resistant crops.

Sensing and extraction of hazardous metals by di-phosphonates of heterocycles: a combined experimental and theoretical study

In this study, pyridine and phenanthroline diphosphonate ligands were investigated for the first time from the context of solvent extraction and potentiometric sensing of Co(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) cations. The extraction efficiency under the same conditions for phenanthroline-diphosphonates is considerably higher than that for pyridine ligands. At the same time, the pyridine-diphosphonates show pronounced selectivity towards lead in this metal series. The extraction systems with phenanthroline diphosphonates provided the most efficient extraction of Cd(II) and Pb(II) cations (D > 90). The newly developed pyridine and phenanthroline diphosphonate ligands have proven to be highly effective components in plasticized polymeric membranes. These ligands can be utilized to construct potentiometric ion sensors that exhibit a notable response specifically towards Pb(II) cations. Among the previously reported tetradentate ligands, the phenanthroline diphosphonate ligand, when incorporated into plasticized polymeric membranes, demonstrated the highest sensitivity towards d-metals and Pb(II). The structure of the single crystal complex of Pb(II) and Cd(II) with pyridine-diphosphonates was studied by X-ray diffraction analysis (XRD). The geometry of Cu(II), Zn(II), Cd(II) and Pb(II) complexes and the energy effect of the complex formation, including pseudo-oligomerization reactions, were determined by DFT calculations. The high sensing and extraction efficiency of diphosphonates with respect to Pb(II) is consistent with the minimum values of complex formation energies. The variation in sensory and extraction properties observed among the studied diphosphonate ligands is influenced by the ability to form polynuclear complexes with Pb(II) cations, whereas such properties are absent in the case of Cd(II) cations.

Recruitment and metabolomics between Canna indica and rhizosphere bacteria under Cr stress

It is of positive significance to explore the mechanism of antioxidant and metabolic response of Canna indica under Cr stress mediated by rhizosphere niche. However, the mechanisms of recruitment and interaction of rhizosphere microorganisms in plants still need to be fully understood. This study combined physiology, microbiology, and metabolomics, revealing the interaction between C. indica and rhizosphere microorganisms under Cr stress. The results showed that Cr stress increased the content of malondialdehyde (MDA) and oxygen-free radicals (ROS) in plants. At the same time, the activities of antioxidant enzymes (SOD, POD, and APX) and the contents of glutathione (GSH) and soluble sugar were increased. In addition, Cr stress decreased the α diversity index of C. indica rhizosphere bacterial community and changed its community structure. The dominant bacteria, namely, Actinobacteriota, Proteobacteria, and Chloroflexi accounted for 75.16% of the total sequence. At the same time, with the extension of stress time, the colonization amount of rhizosphere-dominant bacteria increased significantly, and the metabolites secreted by roots were associated with the formation characteristics of Proteobacteria, Actinobacteria, Bacteroidetes, and other specific bacteria. Five critical metabolic pathways were identified by metabolome analysis, involving 79 differentially expressed metabolites, which were divided into 15 categories, mainly including lipids, terpenoids, and flavonoids. In conclusion, this study revealed the recruitment and interaction response mechanism between C. indica and rhizosphere bacteria under Cr stress through multi-omics methods, providing the theoretical basis for the remediation of Cr-contaminated soil.

A Review of Sensing Applications of Molecularly Imprinted Fluorescent Carbon Dots for Food and Biological Sample Analysis

Molecularly imprinted fluorescent carbon dots (MI-FCDs) find numerous applications in analytical chemistry due to their outstanding photoluminescent properties and having specific pockets for the recognition of target molecules. Despite significant advances, practical applications of MI-FCDs-based fluorescent sensors are still in their initial stages. Therefore, the topical developments in the synthesis, working, and application of MI-FCDs for sensing various target species (e.g., pharmaceuticals, biomolecules, pesticides, food additives, and miscellaneous species) in food and biological media have been highlighted. Moreover, a careful evaluation has been made to select the best methods based on their performance in terms of analytical parameters. To expand the horizons of this field, important challenges and future directions for developing MI-FCDs for practical use are also presented. This review will highlight important aspects of MI-FCDs-based fluorescent sensors for their applicability in food science, material science, environmental science, nanoscience, and biotechnology.

Quantitative analysis of the contribution of sources, diffusion pathways, and receptor attributes for the spatial distribution of soil heavy metals and their nested structure analysis in China

Investigation of heavy metal pollution degree, pollution sources, and spatial distribution structure is crucial for the country's soil pollution prevention, but relevant research is lacking. In this study, As, Cd, Cr, Cu, Pb and Zn in the national scope are taken as research objects. Among them, Cd has the highest pollution level. Four sources were quantitatively allocated as soil type, mining and dressing industry, GDP, and NDVI, which accounted for 92.93, 97.81, 99.30 and 96.24 % of Cr, Cd, Zn and As contamination, respectively. In addition, according to the geographical detector, the spatial distribution of As was affected by three diffusion pathways, whose influence degree were 0.822-0.947, especially the slope. Cadmium was primarily affected by both receptor attributes and diffusion pathways, with an influence degree of 0.010-0.175, especially soil water content and slope; Cr and Pb were affected by receptor attributes, with an influence degree of 0.886-0.986 and 0.007-0.288, respectively, especially for soil water content and soil organic carbon; Cu and Zn were affected by receptor attributes, with an influence degree of 0.182-0.823 and 0.002-0.150, respectively, especially for soil texture. There are two spatial distribution structures with nested scales in east-west and north-south directions. The large spatial structure has a more significant impact on the spatial distribution of heavy metals, especially in the east-west direction. Overall, the mining and dressing industry is the main source in Hunan, Yunnan, and Liaoning, where many mines exist and mining activities are frequent. GDP was the main source in Shanghai and Zhejiang areas, where the economy is developed. NDVI was the main source in Guangdong and Anhui areas, where agriculture is relatively developed. These results provide a basis for determining remediation and prevention objectives in soil pollution remediation and prevention in the national scope.

Transcriptome analysis reveals insight into the protective effect of N-acetylcysteine against cadmium toxicity in Ganoderma lucidum (Polyporales: Polyporaceae)

Ganoderma lucidum is widely cultivated and used as traditional medicine in China and other Asian countries. As a member of macrofungi, Ganoderma lucidum is also prone to bioaccumulation of cadmium and other heavy metals in a polluted environment, which affects the growth and production of Ganoderma lucidum, as well as human health. N-Acetyl-L-cysteine (NAC) is considered a general antioxidant and free radical scavenger that is involved in the regulation of various stress responses in plants and animals. However, whether NAC could regulate cadmium stress responses in macrofungi, particularly edible fungi, is still unknown. In this work, we found that the exogenous NAC could alleviate Cd-induced growth inhibition and reduce the cadmium accumulation in Ganoderma lucidum. The application of the NAC cloud also inhibit cadmium-induced H₂O₂ production in the mycelia. By using transcriptome analysis, 2920 and 1046 differentially expressed unigenes were identified in "Cd100 vs CK" and "NAC_Cd100 vs Cd100," respectively. These differential unigenes were classified into a set of functional categories and pathways, which indicated that various biological pathways may play critical roles in the protective effect of NAC against Cd‑induced toxicity in Ganoderma lucidum. Furthermore, it suggested that the ATP-binding cassette transporter, ZIP transporter, heat shock protein, glutathione transferases, and Cytochrome P450 genes contributed to the increased tolerance to cadmium stress after NAC application in Ganoderma lucidum. These results provide new insight into the physiological and molecular response of Ganoderma lucidum to cadmium stress and the protective role of NAC against cadmium toxicity.

Microorganisms for Bioremediation of Soils Contaminated with Heavy Metals

Heavy-metal contaminants are one of the most relevant problems of contemporary agriculture. High toxicity and the ability to accumulate in soils and crops pose a serious threat to food security. To solve this problem, it is necessary to accelerate the pace of restoration of disturbed agricultural lands. Bioremediation is an effective treatment for agricultural soil pollution. It relies on the ability of microorganisms to remove pollutants. The purpose of this study is to create a consortium based on microorganisms isolated from technogenic sites for further development in the field of soil restoration in agriculture. In the study, promising strains that can remove heavy metals from experimental media were selected: Pantoea sp., Achromobacter denitrificans, Klebsiella oxytoca, Rhizobium radiobacter, and Pseudomonas fluorescens. On their basis, consortiums were compiled, which were investigated for the ability to remove heavy metals from nutrient media, as well as to produce phytohormones. The most effective was Consortium D, which included Achromobacter denitrificans, Klebsiella oxytoca, and Rhizobium radiobacter in a ratio of 1:1:2, respectively. The ability of this consortium to produce indole-3-acetic acid and indole-3-butyric acid was 18.03 μg/L and 2.02 μg/L, respectively; the absorption capacity for heavy metals from the experimental media was Cd (56.39 mg/L), Hg (58.03 mg/L), As (61.17 mg/L), Pb (91.13 mg/L), and Ni (98.22 mg/L). Consortium D has also been found to be effective in conditions of mixed heavy-metal contamination. Due to the fact that the further use of the consortium will be focused on the soil of agricultural land cleanup, its ability to intensify the process of phytoremediation has been studied. The combined use of Trifolium pratense L. and the developed consortium ensured the removal of about 32% Pb, 15% As, 13% Hg, 31% Ni, and 25% Cd from the soil. Further research will be aimed at developing a biological product to improve the efficiency of remediation of lands withdrawn from agricultural use.

Date palm-magnetized biochar for in-situ stabilization of toxic metals in mining-polluted soil: evaluation using single-step extraction methods and phytoavailability

Mining activities provide a pathway for the entry and accumulation of various heavy metals in soil, which ultimately leads to severe environmental pollution. Utilization of various immobilizing agents could restore such contaminated soils. Therefore, in this study, date palm-derived biochars (BCs: produced at 300 °C, 500 °C and 700 °C) and magnetized biochars (MBCs) were employed to stabilize heavy metals (Cd, Pb, Cu and Zn) in mining polluted soil. Metal polluted soil was amended with BCs and MBCs at w/w ratio of 2% and cultivated with wheat (Triticum aestivum L.) in a greenhouse. After harvesting, dry and fresh biomass of plants were recorded. The soil and plant samples were collected, and the concentrations of heavy metals were measured after extracting with water, DTPA (diethylenetriaminepentaacetic acid), EDTA (ethylenediaminetetraacetic acid), and acetic acid. BCs and MBCs resulted in reduced metal availability and uptake, with higher fresh and dry biomass (>36%). MBCs showed maximum decrease (>70%) in uptake and shoot concentration of metals, as these reductions for Cd and Pb reached below the detection limits. Among all single-step extractions, the DTPA-extractable metals showed a significant positive correlation with shoot concentrations of tested metals. Thus, the synthesized BCs and MBCs could effectively be used for stabilizing heavy metals and improve plant productivity in multi-contaminated soils. However, future studies should focus on long term field trials to restore contaminated mining soils using modified biochars.

Recent advances in biochar amendments for immobilization of heavy metals in an agricultural ecosystem: A systematic review

Over the last several decades, extensive and inefficient use of contemporary technologies has resulted in substantial environmental pollution, predominantly caused by potentially hazardous elements (PTEs), like heavy metals that severely harm living species. To combat the presence of heavy metals (HMs) in the agrarian system, biochar becomes an attractive approach for stabilizing and limiting availability of HMs in soils due to its high surface area, porosity, pH, aromatic structure as well as several functional groups, which mostly rely on the feedstock and pyrolysis temperature. Additionally, agricultural waste-derived biochar is an effective management option to ensure carbon neutrality and circular economy while also addressing social and environmental concerns. Given these diverse parameters, the present systematic evaluation seeks to (i) ascertain the effectiveness of heavy metal immobilization by agro waste-derived biochar; (ii) examine the presence of biochar on soil physico-chemical, and thermal properties, along with microbial diversity; (iii) explore the underlying mechanisms responsible for the reduction in heavy metal concentration; and (iv) possibility of biochar implications to advance circular economy approach. The collection of more than 200 papers catalogues the immobilization efficiency of biochar in agricultural soil and its impacts on soil from multi-angle perspectives. The data gathered suggests that pristine biochar effectively reduced cationic heavy metals (Pb, Cd, Cu, Ni) and Cr mobilization and uptake by plants, whereas modified biochar effectively reduced As in soil and plant systems. However, the exact mechanism underlying is a complex biochar-soil interaction. In addition to successfully immobilizing heavy metals in the soil, the application of biochar improved soil fertility and increased agricultural productivity. However, the lack of knowledge on unfavorable impacts on the agricultural systems, along with discrepancies between the use of biochar and experimental conditions, impeded a thorough understanding on a deeper level.

Effects of microwave and plastic content on the sulfur migration during co-pyrolysis of biomass and plastic

In order to reduce the risks of sulfur-containing contaminants present in biofuels, the effects of microwave and content of hydrogen donor on the cracking of C-S bonds and the migration of sulfur were studied by co-pyrolysis of biomass and plastic. The synergistic mechanism of microwave and hydrogen donor was explored from the perspective of deducing the evolution of sulfur-containing compounds based on microwave thermogravimetric analysis. By combining temperature-weight curves, it was found that microwaves and hydrogen radicals promoted the cracking of sulfur-containing compounds and increased the mass loss of biomass during pyrolysis. The mixing ratio of hydrogen donor (plastic) was the key parameter resulting in the removal of sulfur from oil. By adjusting the mixing ratio, the yield of co-pyrolyzed oil was three times higher than that of cow dung pyrolysis alone and the relative removal rate of sulfur reached 73.67%. The relative content of sulfur in the oil was reduced by 73.77% due to the escape of sulfur-containing gases (H₂S, COS and C₂H₅SH) and the formation of sulfate crystals in the char. Microwave selectively heated sulfur-containing organics and hydrogen radicals stimulated the breaking of C-S bonds, which improved the cracking efficiency of the oil. This breaking will provide a theoretical and technological reference for the environmentally friendly treatment of biomass and biofuels.

A review on adsorption characteristics and influencing mechanism of heavy metals in farmland soil

The accumulation of heavy metals in soil and crops is considered to be a severe environmental problem due to its various harmful effects on animals and plants. Soil adsorption is an essential characteristic of mud, which is the fundamental reason for soil to have a specific self-purification capacity and environmental capacity for heavy metals. The adsorption of heavy metals by soil reduces the uptake of these pollutants by crops, thereby limiting food contamination. Therefore, the adsorption of heavy metals in crop soils was taken as the primary research object. Based on the entire reading of the literature, the previous research results were compared and discussed from the four aspects of heterogeneity, physical and chemical properties, competitive adsorption, and external factors. The influencing mechanism of heavy metal adsorption characteristics in soil was reviewed. Finally, suggestions and prospects for future research on heavy metal adsorption were put forward.

Process, influencing factors, and simulation of the lateral transport of heavy metals in surface runoff in a mining area driven by rainfall: A review

The lateral transport of heavy metals can expand the scope of original contamination, and an accurate prediction of heavy metal migration is necessary to control heavy metal transport. However, previous studies have mainly focused on the migration of soil pollutants in the runoff-soil-groundwater system, whereas research on the lateral migration of heavy metals in surface soil driven by rainfall is relatively scarce. Therefore, in this study we analyzed the horizontal migration of water-soluble heavy metals with surface runoff and non-water-soluble heavy metals with sediment particles, investigated the main factors affecting the processes of runoff and sediment transport and the main factors affecting the mobility of heavy metals in soils, summarized the existing methods for the simulation of heavy metal transportation. The construction of a lateral migration model based on the migration mechanism of soil heavy metals, the hydrological model, and the application of the lateral migration model should be the focus of future research. This study provides a theoretical basis for establishing a model of the lateral migration of soil heavy metals and is of great significance for the prevention and control of the risks related to the lateral migration of soil heavy metals.

Risk assessment of metal(loid)s in tea from seven producing provinces in China

To evaluate metal(loid) contamination in tea leaves and assess health risks of tea drinking in China, metal(loid) concentrations in tea leaves from major tea-producing provinces were determined. Nine metal(loid)s (Al, Cr, Co, Ni, Cu, Zn, As, Cd and Pb) were measured in a total of 217 tea samples representing five tea varieties (black tea, dark tea, green tea, oolong tea and white tea) from seven major tea-producing provinces of China (Fujian, Guangdong, Henan, Hunan, Jiangsu, Yunnan and Zhejiang). The results indicated that tea samples from Hunan Province had the highest metal(loid) concentrations, likely due its high prevalence of heavy industrial activities and soil pollution. The concentrations of As and Pb in dark tea were markedly higher than those in other tea varieties. A strong Spearman correlation coefficient (0.78, P < 0.001) of As and Pb in all the tea varieties has also been found, indicating their similar sources. Human health risk assessment for the nine analyzed metal(loid)s indicated that co-exposure to these metal(loids) may not cause significant health risks (hazard index [HI] > 1 suggests considerable health risks). Among the five tea varieties, metal(loids)s in dark and green tea induced relatively higher health risks, with 90th percentile HI values approached 0.8. Co (53.6 %-84.5 %) and Al (3.33 %-15.8 %) made the highest contributions to the HI of the selected tea commodities. Thus, public and regulatory agencies should reduce excessive Co and Al accumulation in these tea varieties during cultivation and production processes.

Sources, transfers and the fate of heavy metals in soil-wheat systems: The case of lead (Pb)/zinc (Zn) smelting region

Heavy metals (HMs) from smelters pose severe challenges to the environmental soil quality of surrounding farmlands, and threaten human health through the food chain. This study explored the environmental effects of smelting activities on farmland soil, and additionally assessed the enrichment, transfer and health risk of HMs in soil-wheat systems. Multiple characterization results were combined to demonstrate that HMs from smelter waste were transferred to the surrounding soil. It was determined that the enrichment of HMs in soil-wheat systems is mainly controlled by the total HM concentration and pH in soil. Furthermore, the priority pollutant in soil-wheat systems was found to be Cd, and Cd affected the transfer of Cu, Mn and Pb from soil to wheat roots. Interestingly, the -OH stretching, C-H stretching, N-H amide and C-O bending were involved in detoxifying HMs in wheat. The mean values of non-carcinogenic and carcinogenic risks by consuming wheat grain were 9.1, 1.4E-02 (adults) and 11.3, 3.3E-03 (children), respectively, indicating a noteworthy health risk. This study highlighted the critical issues arising from Pb/Zn smelting activities on agricultural soils. Notwithstanding, to ensure food security, the affected regions could opt to follow up on the type of crops grown.

Influence of soil inorganic amendments on heavy metal accumulation by leafy vegetables

The present study aims to assess the effect of four inorganic soil amendments, such as lime (CaCO3), red mud consisting of 75% hematite (Fe2O3), gypsum (CaSO4·2H2O), and Al oxide (Al2O3), of an alkaline heavy metal-contaminated soil. For this purpose, a pot experiment was conducted by physically mixing individual six subsamples of a soil sample collected from Thessaly area with four inorganic soil amendments along with two leafy plants, spinach and lettuce. Al oxide causes the maximum reduction of the water-soluble Cu concentration, as its concentrations is no longer detectable. The Cu availability index decreases when aluminum oxide was used. The use of gypsum and red mud caused almost equal reduction while the smallest decrease was caused by the use of lime. The Zn availability index decreased equally when aluminum oxide and gypsum were mixed with the soil sample. The highest reduction of Cu and Zn transfer coefficient (TC) was observed when the Al2O3 was used. In spinach, Zn TC reduction was 39.8% and Cu TC reduction was 41.0%. In lettuce, the addition of Al2O3 led to Cu TC reduction of over 37.3% and Zn TC reduction of up to 38.7%. Generally, Al2O3 nanoparticles may function as suitable sorbents for the removal of Zn and Cu from soil samples, with an increasing effectiveness in spinach rather than lettuce. Liming materials seem to increase the soil alkalinity and promote the complexation of soluble heavy metals with hydroxide ions leading to immobilization of heavy metals in soil and reduce their amount in leafy vegetables. Remediation of contaminated soils is considered necessary to reduce environmental risks and to achieve the means available to increase agricultural production of safe and quality food.

Artificial root exudates restore microbial functioning in a metal contaminated, barren, inactive soil

Restoring enzyme function in barren, brownfield soils using green strategies can improve microbial functioning and enable phytoremediation. It is known that adding simple, readily metabolized substrates secreted by growing plant roots (root exudates) or a laboratory prepared solution of root exudates (artificial root exudates) can stimulate soil microbial function. It is not known whether and how well this strategy works in a contaminated, low functioning soil from an industrial barren site because contaminants in the barren soil might inhibit microbial survival and functioning, or the microbial community might not be adapted to functionally benefit from root exudates. The objective of this study was to determine whether artificial root exudates stimulate microbial function in a barren soil. We collected soils from a barren brownfield (25R) site and an adjacent vegetated brownfield site (25F), with low and high enzyme activities, respectively. We subjected both soils to three treatments: switchgrass (native to the site), artificial root exudates, and a combination of switchgrass and artificial root exudates. We measured enzymatic activity, plant growth, soil moisture, organic matter content, and easily extractable glomalin content over 205 days. By day 157, artificial root exudates increased the phosphatase activity by 9-fold in previously vegetated brownfield soil and by 351-fold in barren brownfield soil. When exudates were added to the barren soil, the plant shoot mass was higher (52.2 ± 2.5 mg) than when they were not (35.4 ± 3.6 mg). In both soils, adding artificial root exudates significantly increased the percent moisture, organic matter, and glomalin content. Treating contaminated, barren soil with artificial root exudates resulted in increased soil microbial function and improved soil properties that might promote a hospitable habitat to support vegetation in such extreme environments. Summary: We added artificial root exudates to stimulate enzymatic function in two contaminated soils. Plant shoot mass, soil percent moisture, glomalin content, and organic matter content significantly increased due to the addition of artificial root exudates to the study soils. Microbially-mediated phosphatase activity was established in a barren, previously inactive, polluted soil.

Influence of soil properties on the development of bacterial community tolerance to Cu, Ni, Pb and Zn

Pollution-Induced Community Tolerance (PICT) is a helpful and sensitive methodology to evaluate the effect of metal pollution in soils using microorganisms as indicators. PICT was used to determine the increase of bacterial community tolerance to Cu, Ni, Pb and Zn (Δlog IC₅₀), and to assess the influence of soil properties on the development of bacterial community tolerance to Cu, Ni, Pb, and Zn. Soil samples showed a wide range of properties, such as pH (3.96-7.47), texture (13.8-31.7% clay) or organic matter (9.7-30.7%). Bacterial growth measured by the [³H]-leucine incorporation method was used as the PICT endpoint. Bacterial communities generally developed tolerance in response to Cu, Ni and Zn additions to soils. However, bacterial communities showed no tolerance to Pb, probably due to high Pb sorption in studied soils. Soil properties influenced the development of bacterial community tolerance to Cu, Ni and Zn. Effective cation exchange and a soil sorption parameter (Freundlich's linearity index) were the selected variables to estimate Δlog IC₅₀ to Cu (R² = 0.65). Clay content and Ni-soluble are the main factors to estimate Δlog IC₅₀ to Ni (R² = 0.63). Organic matter content and a sorption parameter (maximum sorption capacity of the soil from Langmuir equation) are the soil properties to estimate Δlog IC₅₀ to Zn (R² = 0.45). Most of the variables exerted their effect in soil, i.e. PICT selection phase. However, clay content affected bacterial community tolerance determination (PICT detection phase), leading to overestimated measurements of bacterial community tolerance.

Metal speciation in sludges: a tool to evaluate risks of land application and to track heavy metal contamination in sewage network

The agricultural spreading of dehydrated sewage sludge from urban sewage treatment plants is economically profitable provided that the soil agronomic quality and the absence of contamination, in particular of heavy metals, are maintained. We evaluated the variability of sludge between five treatment plants in northern Algeria. We determined parameters that account for their agronomic quality and total content of Ag, Cd, Co, Cr, Cu, Ni, Pb, Ti and Zn. The speciation of metals, which determines their bioavailability, was characterized by sequential extraction into five fractions: easily exchangeable, acid-soluble, bound to carbonates and Fe-sulphides, bound to Fe-Mn oxides, bound to organic matter or sulphides, residual. All the sludges analysed showed satisfactory properties for plant growth. High total Ni contents for three of the sludges indicated that they were not landfillable under French or Chinese regulations. Ni, however, was contained in poorly bioavailable fractions and therefore presented a low risk to soils. In contrast, the total Cu was lower than the regulatory limit values, but mainly contained in very bioavailable fractions whose accumulation over time could reach toxic levels for plants over a period of 3 to 11 years depending on the sludges. These results showed that regulations are not adapted and must take into account the bioavailability with regard to the characteristics of the soils on which to spread. The speciation of metals in the sludge has also, on the one hand, made it possible to identify the zone of the sewerage network in which the sources of contamination must be sought and, on the other hand, has given indications on the possible nature of these sources.

Effects of fungal seed endophyte FXZ2 on Dysphania ambrosioides Zn/Cd tolerance and accumulation

Metal-induced oxidative stress in contaminated soils affects plant growth. In the present study, we evaluated the role of seed endophyte FXZ2 on Dysphania ambrosioides Zn/Cd tolerance and accumulation. A series of pot experiments were conducted under variable Zn (500, 1,000, and 1,500 mg kg^–1) and Cd (5, 15, 30, and 60 mg kg^–1). The results demonstrated that FXZ2-inoculation significantly enhanced the growth of D. ambrosioides and improved its chlorophyll and GSH content. In the rhizosphere, FXZ2 inoculation changed the chemical speciation of Zn/Cd and thus affected their uptake and accumulation in host plants. The exchangeable and carbonate-bound fractions (F1 + F2) of Zn decreased in the rhizosphere of FXZ2-inoculated plants (E+) as compared to non-inoculated plants (E-) under Zn stress (500 and 1,000 mg kg^–1), correspondingly, Zn in the shoots of E+ decreased (p < 0.05). However, at Cd stress (30 and 60 mg kg^–1), the F1 + F2 fractions of Cd in E+ rhizospheric soils increased; subsequently, Cd in the shoots of E+ increased (p < 0.05). FXZ2 could exogenously secrete phytohormones IAA, GA, and JA. The study suggests that seed endophyte FXZ2 can increase Zn/Cd tolerance of host plant by altering Zn/Cd speciation in rhizospheric soils, as well as exogenous production of phytohormones to promote growth, lowering oxidative damage while enhancing antioxidant properties. For Zn/Cd accumulation, it has opposite effects: Zn uptake in E+ plants was significantly (p < 0.05) decreased, while Cd accumulation in E+ plants was significantly (p < 0.05) increased. Thus, FXZ2 has excellent application prospects in Cd phytoextraction and decreasing Zn toxicity in agriculturally important crops.

Risk assessment and early warning of the presence of heavy metal pollution in strawberries

Heavy metal pollution is a major threat to agricultural produce and it can pose potential ecological risks which subsequently impacts on human health. Strawberries are an economically important produce of China. The intrinsic link of heavy metal pollution risk in the soil-strawberry ecosystem is of concern. In this study, the pollution index of heavy metal pollutants in farmlands of different provinces were evaluated, and the results showed significantly high levels of cadmium. In addition, Nemerow integrated pollution index analysis showed that low-pollution farmlands only accounted for 14.07% of the total arable land area. Then, the transfer factors were used to calculate the migration of heavy metals from the soil into strawberries. The results showed that cadmium and nickel were relatively high in strawberries from the Guangxi province. Similar results were found for mercury in Jiangxi Province. The pollution index of single food pollution also showed that mercury in strawberries from Jiangxi Province was at a moderate pollution level. The comprehensive pollution index indicated that heavy metal pollution in strawberries in Central China may be severe. In addition, spatial clustering analysis showed that cadmium, chromium, lead, arsenic and zinc in strawberries had significant hotspot clustering in central, south and southwest China. Finally, our studies also suggested that the risk of carcinogenic and non-carcinogenic diseases was higher in the (2, 4] years age group than in other age groups. People in Yunnan Province were also found to have a higher non-carcinogenic risk than those in other provinces and cities in China. This study provides a comprehensive view of the potential risks of heavy metal contamination in strawberries, which could provide assistance in the design of regulatory and risk management programs for chemical pollutants in strawberries, thus ensuring the safety of consumption of these edible fruits.