Type III Resistant Starch Prepared from Debranched Starch: Structural Changes under Simulated Saliva, Gastric, and Intestinal Conditions and the Impact on Short-Chain Fatty Acid Production

Properties and functions of acylated starch with short-chain fatty acids: a comprehensive review

Short-chain fatty acids (SCFAs) are the primary energy source of colonic epithelial cells, but oral SCFAs are digested, absorbed, or degraded before reaching the colon. The acylated starch with SCFAs can be fermented and release specific SCFAs under the action of colonic intestinal microbiota. This review first introduces the preparation method, reaction mechanism, and substitution factors. Second, the structure, physical and chemical properties, in vitro function, and mechanism of acylated starch were expounded. Finally, the application of acylated starch in foods is introduced, and its safety is evaluated, providing a basis for the further development of acylated starch-based foods. The acylated starch obtained by different acylation types and preparation methods is different in particle, molecular, and crystal structures, leading to changes in the function and physicochemical properties. Meanwhile, acylated starch has the functional potential of targeted delivery of SCFAs to the colon, which can increase SCFAs in feces and intestine, selectively regulate the intestinal microbiota, and produce a prebiotic effect conducive to host health. The safety of acetylated starch has been supported by relevant studies, which have been widely used in various food fields and have great potential in the food industry.

Effects of debranched starch on physicochemical properties and in vitro digestibility of flat rice noodles

Aiming to develop flat rice noodles with both desirable textural quality and lower starch digestibility, we investigated the effect of adding indica rice debranched starch (RDBS) on the quality of flat rice noodles. In this study, adding RDBS to flat rice noodles enhanced their mechanical properties. Cooking characteristic analysis showed that incorporating RDBS into dried flat rice noodles increased the rehydration ratio by 16.1 % and reduced rehydration time by 26.5 %. Scanning electron microscopy (SEM) revealed the presence of microparticles formed through the self-assembly of RDBS within the network of flat rice noodles. X-ray diffraction (XRD) analysis demonstrated that the addition of RDBS elevated the crystallinity of the flat rice noodles, rising from 9.59 % to 22.57 %. In addition, the in vitro simulated digestion test suggested the addition of RDBS led to a threefold increase in the content of slowly digestible starch (SDS) and a ninefold increase in resistant starch (RS) content in flat rice noodles. This study found that adding RDBS into flat rice noodles can effectively reduce their digestion rate and improve their eating quality. It could be a promising approach for creating functional rice noodles aimed at alleviating public health concerns such as diabetes and obesity.

Insight into the promoted recrystallization and water distribution of bread by removing starch granule - surface and - associated proteins during storage

The influence of starch granule surface proteins (SGSPs) and starch granule-associated proteins (SGAPs) on bread retrogradation was investigated in a reconstituted dough system. The removal of both SGSPs and SGAPs resulted in poor bread qualities, decreasing specific volume and crumb porosity, leading to more baking loss and compact crumb structure. Particularly, removing SGSPs was effective in promoting the bread retrogradation. After 7 days of storage, the hardness of bread without SGSPs showed an increase of 353.34 g than the bread without SGAPs. Proton population and relaxation times exhibited that the absence of SGSPs significantly decreased the content of bound water from 11.51 % to 7.03 %, indicating lower water-holding capacity due to the loosen gelling structure. Compared to the control group, bread without SGSPs accelerated the starch recrystallinity by a reduction in soluble starch content, thereby increasing the retrogradation enthalpy and relative crystallinity through promoting the molecular reassociation in starch.

A mechanistic study of chestnut starch retrogradation and its effects on in vitro starch digestion

Starch retrogradation is a mechanism that is associated with the quality of starch-based food products. A thorough understanding of chestnut starch retrogradation behavior plays an important role in maintaining the quality of chestnut foods during processing and storage. In this study, we investigated the effects of storage time on the structural properties and in vitro digestibility of gelatinized chestnut starch by using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and solid-state 13C nuclear magnetic resonance (NMR). The results showed that the long-range crystallinity and short-range molecular order of retrograded chestnut starch first rapidly increased from 3 h to 3 d and then decreased from 3 d to 7 d, followed by a slight increase from 7 d to 14 d with retrogradation. With the extension of storage time at 4 °C, there were generally obvious increases in single and double helical structures, which were stacked into long-term ordered structure, resulting in increased enthalpy changes as detected by differential scanning calorimetry spectroscopy (DSC) and reduction of the digestion rate of retrograded chestnut starch. Overall, this study may provide important implications for manipulating and improving the quality of chestnut foods.

Structural analysis of type 3 resistant starch from Canna edulis during in vitro simulated digestion and its post-digested residue impact on human gut microbiota

Introduction

Resistant starch (RS) has garnered attention for its health benefits, including modulating the gut microbiota and promoting the production of short-chain fatty acids (SCFAs).

Methods

This study investigates structural changes of type 3 resistant starch from Canna edulis (CE) during in vitro simulated digestion and explores its health-relevant properties using healthy individuals' fecal microbiota.

Results

CE, prepared with a RS content of 59.38%, underwent a comprehensive analysis employing X-ray diffraction (XRD), fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). During simulated digestion, XRD analysis demonstrated a significant rise in CE's relative crystallinity from 38.92 to 49.34%. SEM illustrated the transition of CE from a smooth to a rough surface, a notable morphological shift. Post-digestion, CE was introduced into microbial fermentation. Notably, propionic acid and valeric acid levels significantly increased compared to the control group. Furthere more, beneficial Bifidobacterium proliferated while pathogenic Escherichia-Shigella was suppressed. When comparing CE to the well-known functional food fructo-oligosaccharide (FOS), CE showed a specific ability to support the growth of Bifidobacterium and stimulate the production of short-chain fatty acids (SCFAs) without causing lactic acid accumulation.

Discussion

CE demonstrates potential as a functional health food, with implications for gut health enhancement and SCFAs production.

Advancements in enhancing resistant starch type 3 (RS3) content in starchy food and its impact on gut microbiota: A review

Resistant starch type 3 (RS3), often found in cooked starchy food, has various health benefits due to its indigestible properties and physiological functions such as promoting the abundance of gut beneficial microbial flora and inhibiting the growth of intestinal pathogenic bacteria. However, it is challenging to develop starchy food with high RS3 content. This review aims to provide a detailed overview of current advancements to enhance RS3 content in starchy food and its effects of RS3 on gut microbiota. These approaches include breeding high-amylose cereals through gene editing techniques, processing, enzyme treatments, storage, formation of RS3 nanoparticles, and the incorporation of bioactive compounds. The mechanisms, specific conditions, advantages, and disadvantages associated with each approach and the potential effects of RS3 prepared by different methods on gut microbiota are summarized. In conclusion, this review contains important information that aims to provide guidelines for developing an efficient RS3 preparation process and promote the consumption of RS3-enriched starchy foods to improve overall health outcomes.

Structural properties of the intra- and interhelical cavities of V6-type crystalline starches

V-type crystalline starch is known for its property to enhance aroma retention. Intra- and interhelical cavities are the first-order characteristics of V-type crystalline starch, which can affect its properties from microscopic level. This work aims to provide a detailed analysis of structural attributes of intra- and interhelical cavities and their influence on the properties of V-type crystalline starches. Helix deformation was caused due to the formation of interhelical cavities, which was reflected by the downfield shift of the signals for C1 and C4 as well as the appearance of an independent signal for C3 in 13C CP/MAS NMR spectra. Unit cell and lamellar structure formed by the aggregation of intrahelical cavities exhibited relatively low cell volume and high fractal dimension at crystal cell and lamellar levels. Toward a larger crystal, d-spacing increased with the formation of interhelical cavities, causing low-angle shifts of V-type crystalline starches in X-ray diffraction profiles. Intrahelical cavities enabled V6I-type crystalline starch to show high crystallinity per unit volume and a favorable short-range order, contributing greatly to the stable thermal properties. The flavor quality improvement in starch-based food is attributed to the structural characteristics of helical cavities and their relationship with the properties of V-type crystalline starches.

Effect of milling and defatting treatment on texture and digestion properties of oat rice

Oat rice with great sensory acceptance was developed based on the combination method of milling and defatting (petroleum ether) treatment. In this study, the effect of milling and defatting treatment on the texture and digestion properties of oat rice was investigated. Results showed that milling and defatting treatment enhanced stickiness, enthalpy, and starch digestibility. The pasting temperature and hardness of oat rice were reduced. The lipid content of oat rice was significantly reduced by milling and defatting treatment, leading to a decrease in the formation of starch-lipid complex. Fourier transform infrared spectroscopy and X-ray diffraction analyses revealed that the application of milling and defatting treatments led to a reduction in the content of starch-lipid complexes in oats during the cooking process. Milling and defatting significantly enhanced both the rapid and slow digestion rates of oat rice. Specifically, the rapid digestion rate was found to be 2.5 times higher than the slow digestion rate. The nutritive components of oat rice were properly preserved, and the viscosity and elasticity of oat rice reached the maximum when milling for 40 s and defatting. This study provides a theoretical basis for oat products.

Study of the self-assembly, drug encapsulating and delivering characteristics of short chain amylose-based type 3 resistant starch nanoparticles from Canna edulis

In developing type 3 resistant starch (RS3) from Canna edulis for use as functional food ingredients, we investigated the synthesis of C. edulis RS3 nanoparticles. Simultaneously, we explored the potential of C. edulis short-chain amylose (SCA)-based RS3 nanoparticles (RS3N) as a targeted delivery system, with a specific focus on colon targeting, yielding promising insights. Our study revealed that the degree of polymerization (DP) of C. edulis SCA, particularly the chains of DP 36- 100, exhibited a robust correlation with the particle size and physicochemical characteristics of C. edulis SCA-based RS3N. Additionally, recrystallization temperature variation (4, 25, and 45 °C) significantly influenced the self-assembly behavior of C. edulis SCA, with the preparation at 4 °C resulting in more uniform particle size distributions. In further expanding the scope of applications for C. edulis SCA-based RS3N, we harnessed the potential of Fe3O4 and curcumin (CUR) as guest molecules to assess drug encapsulation and colon-targeting capabilities. Incorporating Fe3O4 into the self-assembly system led to the production of magnetic RS3N, confirming the successful encapsulation of Fe3O4 within C. edulis SCA-based RS3N. Furthermore, in vitro experiments have demonstrated that CUR-RS3N was stable in the gastrointestinal tract and gradually released curcumin with fermentation in the colonic environment. Collectively, these findings provide invaluable insights into the intricate self-assembly behavior of C. edulis SCA with varying fine structures and recrystallization temperatures during RS3N formation. Moreover, they underscore the colon-targeted properties of C. edulis SCA-based RS3N, opening promising avenues for its application within the food industry, particularly in advanced controlled drug delivery systems.

In vitro gastrointestinal digestion methods of carbohydrate-rich foods

The trend toward healthier food products has led to an increase in the research of in vitro gastrointestinal digestion methods. Among the most used models, static models are the simplest. Most static models have three stages: oral, gastric, and intestinal, simulating the enzymatic, electrolyte, pH, temperature, and bile salt conditions. The studies that have taken the most notice are those related to antioxidant activity, followed by those dealing with proteins and carbohydrates using most of them static in vitro digestion models. The number of these studies has increased over the years, passing from 45 to 415 in a 10-year period (2012-2023) and showing an interest in knowing the impact of food on human health. Nevertheless, published papers report different methodologies and analytical approaches. This review discusses the similarities and differences between the published static in vitro gastrointestinal digestion methods, with a focus on carbohydrates, finding that the most used protocol is Infogest, but with differences, mainly in the type of enzymes and their activity. Regarding in vitro gastrointestinal digestion of carbohydrates, many of the published studies are related to food and biomacromolecules, being the oral phase the most omitted, while the intestinal phase in the most diverse. Other methodologies to study the intestinal phase have been recommended, but the number of in vitro digestion studies using these methodologies (RSIE and BBMV) is still scarce but could represent a good alternative to analyze carbohydrates foods when combining with Infogest. More studies are required in this area.

Crystal type, chain length and polydispersity impact the resistant starch type 3 immunomodulatory capacity via Toll-like receptors

Food ingredients that can activate and improve immunological defense, against e.g., pathogens, have become a major field of research. Resistant starches (RSs) can resist enzymes in the upper gastrointestinal (GI) tract and induce health benefits. RS-3 physicochemical characteristics such as chain length (DP), A- or B-type crystal, and polydispersity index (PI) might be crucial for immunomodulation by activating human toll-like receptors (hTLRs). We hypothesize that crystal type, DP and PI, alone or in combination, impact the recognition of RS-3 preparations by hTLRs leading to different RS-3 immunomodulatory effects. We studied the activation of hTLR2, hTLR4, and hTLR5 by 0.5, 1 and 2 mg/mL of RS-3. We found strong activation of hTLR2-dependent NF-kB activation with PI <1.25, DP 18 as an A- or B-type crystal. At different doses, NF-kB activation was increased from 6.8 to 7.1 and 10-fold with A-type and 6.2 to 10.2 and 14.4-fold with B-type. This also resulted in higher cytokine production in monocytes. Molecular docking, using amylose-A and B, demonstrated that B-crystals bind hTLR2 promoting hTLR2-1 dimerization, supporting the stronger effects of B-type crystals. Immunomodulatory effects of RS-3 are predominantly hTLR2-dependent, and activation can be tailored by managing crystallinity, chain length, and PI.

Presence of digestible starch impacts in vitro fermentation of resistant starch

Starch is an important energy source for humans. Starch escaping digestion in the small intestine will transit to the colon to be fermented by gut microbes. Many gut microbes express α-amylases that can degrade soluble starch, but only a few are able to degrade intrinsic resistant starch (RS), which is insoluble and highly resistant to digestion (≥80% RS). We studied the in vitro fermentability of eight retrograded starches (RS-3 preparations) differing in rapidly digestible starch content (≥70%, 35-50%, ≤15%) by a pooled adult faecal inoculum and found that fermentability depends on the digestible starch fraction. Digestible starch was readily fermented yielding acetate and lactate, whereas resistant starch was fermented much slower generating acetate and butyrate. Primarily Bifidobacterium increased in relative abundance upon digestible starch fermentation, whereas resistant starch fermentation also increased relative abundance of Ruminococcus and Lachnospiraceae. The presence of small fractions of total digestible starch (±25%) within RS-3 preparations influenced the fermentation rate and microbiota composition, after which the resistant starch fraction was hardly fermented. By short-chain fatty acid quantification, we observed that six individual faecal inocula obtained from infants and adults were able to ferment digestible starch, whereas only one adult faecal inoculum was fermenting intrinsic RS-3. This suggests that, in contrast to digestible starch, intrinsic RS-3 is only fermentable when specific microbes are present. Our data illustrates that awareness is required for the presence of digestible starch during in vitro fermentation of resistant starch, since such digestible fraction might influence and overrule the evalution of the prebiotic potential of resistant starches.

Effect of structural characteristics of resistant starch prepared by various methods on microbial community and fermentative products

Resistant starch (RS) has been extensively studied because of its beneficial effects on gut microbiota. In this study, four RSs obtained through various preparation processes were utilized for in vitro fermentation, and their structural characteristics before and after fermentation were determined using chromatography, Fourier infrared spectroscopy, and scanning electron microscopy (SEM). It was observed that these RSs can be classified into two categories based on their fermentation and structural features. The autoclaving RS (ARS) and extruding RS (ERS) were classified as Class I Microbiome Community (MC-I), characterized by a higher proportion of butyrate and its producers, including unclassified_g_Megasphaera and Megasphaera elsdenii. While microwaving RS (MRS) and ultrasound RS (URS) belonged to Class II Microbiome Community (MC-II), marked by a higher proportion of acetate and its producer, Bifidobacterium pseudocatenulatum DSM 20438. MC-I had a lower molecular weight, shorter chain length, more chains with degree of polymerization (DP) 36-100, and a more ordered structure than MC-II. Furthermore, SEM observations revealed distinct degradation patterns between MC-I and MC-II, which may be attributed to their surface structural characteristics. These findings imply that the preparation methods employed for RS can determine its multilevel structural characteristics, and consequently influence its physiological properties.

A combined recrystallization and acetylation strategy for resistant starch with enhanced thermal stability and excellent short-chain fatty acid production

In this study, resistant starch (RS) with enhanced thermal stability and excellent short-chain fatty acid production was obtained using recrystallization at 50 °C of debranched waxy maize starch followed by an acetylation strategy. RS sample obtained by debranching with a 25% high concentration of native starch combined with recrystallization at 50 °C (25DBS-50 °CP) and acetylated RS (25DBS-50 °CPA) exhibited high relative crystallinity of 69.4% and 64.2%, respectively. And the peak gelatinization temperature values of them reached 116.8 °C and 111.4 °C, and the RS contents of them after cooking for 30 min remained at 35.1% and 40.0%, respectively. The acetic acid yield of 25DBS-50 °CPA was higher than that of the control group. These results indicated that recrystallization at 50 °C combined with acetylation for debranched starch could be used as a new method for regulating the digestibility and fermentation properties while developing food with a low glycemic response and specific nutritional benefits.

Improvement of in vitro digestibility and thermostability of debranched waxy maize starch by sequential ethanol fractionation

This study aimed to improve the in vitro digestibility and thermostability of debranched waxy maize starch (DWMS) by sequential fractionation. Waxy maize starch was debranched by pullulanase, followed by sequential precipitation through controlling the ratio of starch supernatants to ethanol at 1:0.5, 1:1, and 1:1.5 (v/v). Subsequently the structural, thermal, in vitro digestive properties of DWMS were investigated. In vitro digestion results showed that the secondary ethanol fractionation of 1:1 on the basis of the initial fractionation (1:0.5) induced a significant higher amount of slowly digestive starch (SDS, 30.0 %) and resistant starch (RS, 58.6 %) amongst all three fractions, along with the highest peak temperature (Tp, 106.4 °C) and the highest decomposition value (Td, 310.0 °C) in calorimetric (DSC) and thermogravimetry (TGA) measurements. Chain length distribution, surface morphology, and laser confocal micro-Raman spectroscopy (LCM-Raman) analyses revealed that medium (degree of polymerization, DP 13- 36) and long chains (DP ≥37) respectively constituting 72.0 % and 10.2 % of DWMS resulted in the formation of spheroidal crystallites with higher homogeneity and more ordered short-range structures. Overall, this work confirmed that ethanol fractionation is an efficient method for improving the in vitro digestibility and heat stability of waxy maize starch.

Type of intrinsic resistant starch type 3 determines in vitro fermentation by pooled adult faecal inoculum

Resistant starch (RS) results in relatively high health-beneficial butyrate levels upon fermentation by gut microbiota. We studied how physico-chemical characteristics of RS-3 influenced butyrate production during fermentation. Six highly resistant RS-3 substrates (intrinsic RS-3, 80-95 % RS) differing in chain length (DPn 16-76), Mw distribution (PI) and crystal type (A/B) were fermented in vitro by pooled adult faecal inoculum. All intrinsic RS-3 substrates were fermented to relatively high butyrate levels (acetate/butyrate ≤ 2.5), and especially fermentation of A-type RS-3 prepared from polydisperse α-1,4 glucans resulted in the highest relative butyrate amount produced (acetate/butyrate: 1). Analysis of the microbiota composition after fermentation revealed that intrinsic RS-3 stimulated primarily Lachnospiraceae, Bifidobacterium and Ruminococcus, but the relative abundances of these taxa differed slightly depending on the RS-3 physico-chemical characteristics. Especially intrinsic RS-3 of narrow disperse Mw distribution stimulated relatively more Ruminococcus. Selected RS fractions (polydisperse Mw distribution) obtained after pre-digestion were fermented to acetate and butyrate (ratio ≤ 1.8) and stimulated Lachnospiraceae and Bifidobacterium. This study indicates that especially the α-1,4 glucan Mw distribution dependent microstructure of RS-3 influences butyrate production and microbiota composition during RS-3 fermentation.

Inactivation of SSIIIa enhances the RS content through altering starch structure and accumulating C18:2 in japonica rice

SSIIIa was the key gene responsible for RS formation in rice endosperm. The higher RS content in ssIIIa mutant has been proposed to be majorly due to the increased amylose-lipid complexes (RS5). However, the formation of RS5 elicited by ssIIIa mutation and the importance of RS5 for total RS content in rice are still unclear. With japonica ssIIIa loss-of-function mutants created by CRISPR/Cas9 gene editing, the effects of SSIIIa mutation on RS5 were furtherly evaluated through investigating the transcriptome and metabolites. Inactivation of SSIIIa caused significant enhancement in amylose and RS content but without depletion in starch reserves. SSIIIa mutation modulated the genes involved in carbohydrate and lipid metabolisms and the redistribution of substances, led to accumulated protein, glucose, fructose, and C18:2. Besides the increased amylose content and altered amylopectin structure, the increased C18:2 contributed greatly to the enhancement in RS content in japonica ssIIIa mutants through complexing with amylose to form RS5, while the existence of lipid counted against the enhancement of RS content in indica rice. RS5 showed discrepant contributions for the total RS in rice with different genetic background. Inactivation of SSIIIa has great potential in improving RS5 content in japonica rice without great yield loss.

Metal ion-mediated modulation of morphology, physicochemical properties, and digestibility of type 3 resistant starch microparticle

Short-chain glucan (SCG) derived from debranched amylopectin has emerged as a promising candidate for the production of resistant starch particle (RSP) due to its controllable self-assembly features. Here, we investigated the effect of metal cations with different valencies and concentrations on the morphology, physicochemical properties, and digestibility of RSP formed by the self-assembly of SCG. The effect of cations on the formation of RSP followed the valency in the following order: Na⁺, Ka⁺, Mg²⁺, Ca²⁺, Fe³⁺, and Al³⁺, of which 10 mM trivalent cations increased the particle size of RSP over 2 μm and considerably decreased the crystallinity by 49.5 % ~ 50.9 %, which were significantly different from that of mono- and divalent ones. Importantly, RSP formed with divalent cations switched the surface charge from -18.6 mV to 12.9 mV, which significantly increased the RS level, indicating that metal cations would be useful for regulating physicochemical properties and digestibility of RSP.

Recrystallized Resistant Starch: Structural Changes in the Stomach, Duodenum, and Ileum and the Impact on Blood Glucose and Intestinal Microbiome in Mice

The structure and properties of resistant starch (RS) and its digestive products were assessed in mice. Digestion of recrystallized (group RS3, including RS3a and RS3b) and control RS (RS2, RS4, and RS5) in the stomach, duodenum, and ileum of mice was systematically analyzed along with in vivo digestive degradation of RS3. RS3a and RS3b significantly reduced the release of blood glucose. During in vivo digestion, the proportion of ultrashort and A chains in the RS3a and RS3b digestive residues gradually increased, whereas the proportion of B1 and B2 chains gradually reduced. B3+ chain proportions did not change. The final digestive residues in the ileum (RS3a-I90 and RS3b-I90) maintained a high proportion of suitable chain length, accounting for more than 60%. The crystalline structure of RS3a-I90 was weakened, indicating the hydrolysis of partial crystal structure. In comparison, RS3b-I90 maintained an orderly crystalline structure, indicating its higher resistance to enzymatic hydrolysis. In vivo experiments showed that RS could maintain the normal growth of mice and effectively control weight gain. RS3a significantly increased the concentrations of acetic, propionic, and butyric acids, while reducing the abundance of Firmicutes to Bacteroidetes ratio, further confirming the benefits of RS3 in gastrointestinal health.

Structural Characteristics, Physicochemical Properties, and Digestibility Analysis of Resistant Starch Type-V Prepared from Debranched Corn Starch and Fatty Acid Complexation

Corn starch was gelatinized and treated with a metagenomic type 1 pullulanase (Pul_M), increasing the proportion of linear glucan chains. The debranched corn starch (DCS), containing amylose helices, was subjected to complexation with fatty acid molecules at moderate temperatures (50-60 °C). The amylose-lipid complexes prepared using saturated fatty acids, e.g., capric acid (CA) and lauric acid (LA), displayed higher CI values as compared to that of unsaturated fatty acid compounds, e.g., undecylenic acids (UAs) and oleic acid (OA). The DCS-fatty acid complex was estimated to contain about 14% of rapidly digested starch (RDS), 26% of slowly digested starch (SDS), and 60% of resistant starch V (RS-5). RS-5 samples exhibited high resistance toward digestive enzymatic hydrolysis. The surface microdetails of RS-5 were examined by scanning electron microscopy (SEM), depicting small spherulite-like structural aggregates. X-ray diffraction pattern analysis estimated about 46% of the crystallinity of RS-5. Thermal attributes of RS-5 were examined by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis, depicting the increase in melting enthalpies after the complexation of fatty acid molecules with debranched corn starch. Comparative DSC thermograms divulged a relatively higher stability of RS-5 as compared to that of RS-3. The findings advocated the potentiality of RS-5 (nondigestible DCS-LA complex) as a functional, valuable ingredient in the food industry.

Preparation and characterization of debranched starches: Influence of botanical source and debranching time

The influence of botanical source (waxy corn, glutinous rice, tapioca and potato), either based on crystallization or morphology, and the debranching time (6-48 h) on the physicochemical properties of debranched starches (DBSs) were systematically investigated. The divergence of depolymerization among different botanical sources within same hydrolysis time suggested that the debranching treatment was not only depending on the molecular profile and crystalline structure, but also related with the granular size and morphology of native starches. Fourier transformation infrared spectroscopy (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) suggested that long-term debranching reaction produced DBSs with improved degree of crystallization and reduced iodine binding capacity. Simulated in-vitro digestion assay showed that the proportion of digestive fractions from different botanical originated DBSs differed greatly. Additionally, prolonging the debranching time yielded increased level of resistant starch. The study may provide guidance for exploring DBSs with various molecular weight to fulfill their tailored applications.

Effect of resistant starch types as a prebiotic

Since the role of intestinal microbiota in metabolism was understood, the importance of dietary components such as fibres and prebiotics, which affect the modulation of microbiota, has been increasing day by day. While all prebiotic components are considered dietary fibre, not every dietary fibre is considered a prebiotic. While fructooligosaccharides, galactooligosaccharides, inulin, and galactans are considered prebiotics, other fermentable carbohydrates are considered candidate prebiotic components based on in vitro and preclinical studies. Resistant starch, one of such carbohydrates, is considered a potential prebiotic component when it is made resistant to digestion naturally or chemically. In this review, both in vitro and in vivo studies in which the prebiotic capacity of type II, type III, and type IV resistant starch isolated from food and produced commercially was assessed were analyzed. According to the results of current studies, certain types of resistant starch are thought to have a high prebiotic capacity, and they may be candidate prebiotic components although positive results have not been achieved in all studies. KEY POINTS: • Resistant starch is undigested in the small intestine and is fermented in the large intestine. • Resistant starch fermentation positively affects the growth of Bifidobacterium and Lactobacillus. • Resistant starch can be considered a prebiotic ingredient.

Unlocking the Potential of High-Amylose Starch for Gut Health: Not All Function the Same

High-amylose starch has unique functional properties and nutritional values in food applications. This type of starch is generally resistant to enzymatic digestion in the gastrointestinal tract, and contains an increased fraction of resistant starch (RS), which is a type of dietary fiber. The digestion and fermentation of high-amylose starch in the gut are of current research interest, as the processes are related to its nutritional functionality. This review summarizes recent in vitro and in vivo studies on the digestion and fermentation of high-amylose starches from different botanical sources and those that have been obtained by modifications. The RS content and fermentation properties are compared among high-amylose starches. This review aims to provide a current understanding of the relationship between high-amylose starch structures and fermentation-related nutritional properties. The results of these studies suggest that both modifications and food processing of high-amylose starch result in distinct fermentation products and nutritional properties. The review provides insight into the potential future applications of diverse high-amylose starches as bioactive compounds to modulate colonic fermentation.

Phenolic Release during In Vitro Digestion of Cold and Hot Extruded Noodles Supplemented with Starch and Phenolic Extracts

Dietary phenolic compounds must be released from the food matrix in the gastrointestinal tract to play a bioactive role, the release of which is interfered with by food structure. The release of phenolics (unbound and bound) of cold and hot extruded noodles enriched with phenolics (2.0%) during simulated in vitro gastrointestinal digestion was investigated. Bound phenolic content and X-ray diffraction (XRD) analysis were utilized to characterize the intensity and manner of starch-phenolic complexation during the preparation of extruded noodles. Hot extrusion induced the formation of more complexes, especially the V-type inclusion complexes, with a higher proportion of bound phenolics than cold extrusion, contributing to a more controlled release of phenolics along with slower starch digestion. For instance, during simulated small intestinal digestion, less unbound phenolics (59.4%) were released from hot extruded phenolic-enhanced noodles than from the corresponding cold extruded noodles (68.2%). This is similar to the release behavior of bound phenolics, that cold extruded noodles released more bound phenolics (56.5%) than hot extruded noodles (41.9%). For noodles extruded with rutin, the release of unbound rutin from hot extruded noodles and cold extruded noodles was 63.6% and 79.0%, respectively, in the small intestine phase, and bound rutin was released at a much lower amount from the hot extruded noodles (55.8%) than from the cold extruded noodles (89.7%). Hot extrusion may allow more potential bioaccessible phenolics (such as rutin), further improving the development of starchy foods enriched with controlled phenolics.

Facile fabrication of thermostable and colorimetric starch-based waterproof coating with edible organic materials

With the attention to pollution and human health, nontoxic food grade superhydrophobic coating as a strategy to reduce food waste has aroused wide interest. Herein, a food grade colorimetric starch-based waterproof coating was achieved using starch nanoparticle (SNP), stearic acid (STA) and anthocyanin. The as-prepared coating exhibited considerable thermostability and remarkable water repellency due to the low-surface-energy pomegranate pulp-like micro/nanostructure assembled by STA and SNP. The certain mechanical and chemical durability, prominent self-cleaning property and liquid food repellency in the coating had been thoroughly verified. Additionally, anthocyanin was creatively introduced to the coating via SNP loading, which endowed the coating with color response to different pH solutions. Thus, the coating is applicable to freshness monitoring without being disabled by water. This thermostable and colorimetric starch-based waterproof coating shows promising application prospects in advanced bio-based food-contact material field.

Butyl Group Distribution, Intestinal Digestion, and Colonic Fermentation Characteristics of Different Butyrylated Starches

Despite being a promising butyrate carrier, butyrylated starch remains poorly understood in terms of the correlation between starch structure and fermentation characteristics. Herein, three butyrylated starches derived from different botanical sources were prepared with a similar degree of substitution. Raman microscopy and water contact angle analysis suggested that a relatively large proportion of butyl group substitutions occurred within the interior of butyrylated waxy maize starch (B-WMS) granules. In vitro digestion results showed that branch points provided butyl groups with a specific protection from enzymatic hydrolysis, whereas butyl groups significantly increased the resistant starch content of butyrylated starch. Moreover, the porous morphology with less distributed butyl groups on the granular surface contributed to a faster fermentation rate in B-WMS. The current study reveals the influence of botanical origin on butyl group distribution, which in turn plays a pivotal role in regulating the intestinal digestion and colonic fermentation of butyrylated starch.

Preparation and characterization of non-crystalline granular starch with low processing viscosity

Non-crystalline granular starch (NCGS) has advantages in the deep processing of starch owing to its unique structure and function. In this study, NCGS was successfully prepared at a baking temperature of 210 °C, and the morphology, structure, pasting properties, and rheological properties of the NCGS were systematically studied. Compared with native starch, NCGS showed a lower processing viscosity and rapid reduction in the peak viscosity from 3795 to 147 cP. Furthermore, NCGS exhibited impaired short- and long-range ordered structures, as indicated by the lower ratio of absorbance at 1047/1015 cm^-1 and decreased crystallinity compared to native starch. Additionally, amylose and amylopectin with long and medium chains in NCGS were degraded into short chains, resulting in an increase in amylose content and branch density. The analysis of the physicochemical properties of NCGS, especially the low processing viscosity, is of great importance for the industrial application of starch, particularly in terms of improving the yield, saving energy, and reducing environmental pollution.

Modulation of Gut Microbiota for the Prevention and Treatment of COVID-19

The gut microbiota is well known to exert multiple benefits on human health including protection from disease causing pathobiont microbes. It has been recognized that healthy intestinal microbiota is of great importance in the pathogenesis of COVID-19. Gut dysbiosis caused by various reasons is associated with severe COVID-19. Therefore, the modulation of gut microbiota and supplementation of commensal bacterial metabolites could reduce the severity of COVID-19. Many approaches have been studied to improve gut microbiota in COVID-19 including probiotics, bacterial metabolites, and prebiotics, as well as nutraceuticals and trace elements. So far, 19 clinical trials for testing the efficacy of probiotics and synbiotics in COVID-19 prevention and treatment are ongoing. In this narrative review, we summarize the effects of various approaches on the prevention and treatment of COVID-19 and discuss associated mechanisms.