Nanoencapsulation, Nano-guard for Pesticides: A New Window for Safe Application

Liposomes as selenium nanocarriers for foliar application to wheat plants: A biofortification strategy

In the present work, liposomes have been used as nanocarriers in the biofortification of wheat plants with selenium (Se) through foliar application. Liposomal formulations were prepared using 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and Phospholipon®90H (P90H) (average size <100 nm), loaded with different concentrations of inorganic Se (selenite and selenate) and applied twice to the plants in the stage of vegetative growth. Liposomes enhanced Se uptake by wheat plants compared to direct application. The highest Se enrichment was achieved using the phospholipid DPPC and a concentration of 1000 μmol·L-1 of Se without affecting the biomass, chlorophylls, carotenoids, and the concentration of mineral nutrients of the plants. The chemical speciation of Se in the plants was further investigated by X-ray absorption spectroscopy (XAS). The results from XAS spectra revealed that most of the inorganic Se was transformed to organic Se and that the use of liposomes influenced the proportion of C-Se-C over C-Se-Se-C species.

Effects of particle size on toxicity, bioaccumulation, and translocation of zinc oxide nanoparticles to bok choy (Brassica chinensis L.) in garden soil

The indiscriminate use of zinc oxide nanoparticles (ZnO NPs) in daily life can lead to their release into soil environment. These ZnO NPs can be taken up by crops and translocated to their edible part, potentially causing risks to the ecosystem and human health. In this study, we conducted pot experiments to determine phytotoxicity, bioaccumulation and translocation depending on the size (10 - 30 nm, 80 - 200 nm and 300 nm diameter) and concentration (0, 100, 500 and 1000 mg Zn/kg) of ZnO NPs and Zn ion (Zn2+) in bok choy, a leafy green vegetable crop. After 14 days of exposure, our results showed that large-sized ZnO NPs (i.e., 300 nm) at the highest concentration exhibited greater phytotoxicity, including obstruction of leaf and root weight (42.5 % and 33.8 %, respectively) and reduction of chlorophyll a and b content (50.2 % and 85.2 %, respectively), as well as changes in the activities of oxidative stress responses compared to those of small-sized ZnO NPs, although their translocation ability was relatively lower than that of smaller ones. The translocation factor (TF) values decreased as the size of ZnO NPs increased, with TF values of 0.68 for 10 - 30 nm, 0.55 for 80 - 200 nm, and 0.27 for 300 nm ZnO NPs, all at the highest exposure concentration. Both the results of micro X-ray fluorescence (μ-XRF) spectrometer and bio-transmission electron microscopy (bio-TEM) showed that the Zn elements were mainly localized at the edges of leaves exposed to small-sized ZnO NPs. However, the Zn elements upon exposure to large-sized ZnO NP were primarily observed in the primary veins of leaves in the μ-XRF data, indicating a limitation in their ability to translocate from roots to leaves. This study not only advances our comprehension of the environmental impact of nanotechnology but also holds considerable implications for the future of sustainable agriculture and food safety.

Unveiling the frontiers of potato disease research through bibliometric analysis

Research on potato diseases had been widely reported, but a systematic review of potato diseases was lacking. Here, bibliometrics was used to systematically analyze the progress of potato disease. The publications related to "potato" and "disease" were searched in the Web of Science (WOS) from 2014 to 2023. The results showed that a total of 2095 publications on potato diseases were retrieved, with the annual publication output increasing year by year at a growth rate of 8.52%. The main countries where publications were issued were the United States, China, and India. There was relatively close cooperation observed between China, the United States, and the United Kingdom in terms of international collaboration, while international cooperation by India was less extensive. Based on citation analysis and trending topics, potential future research directions include nanoparticles, which provides highly effective carriers for biologically active substances due to their small dimensions, extensive surface area, and numerous binding sites; machine learning, which facilitates rapid identification of relevant targets in extensive datasets, thereby accelerating the process of disease diagnosis and fungicide innovation; and synthetic communities composed of various functional microorganisms, which demonstrate more stable effects in disease prevention and control.

Dual-loaded nano pesticide system based on industrial grade scaleable carrier materials with combinatory efficacy and improved safety

Repeated and widespread use of single chemical pesticides raises concerns about efficiency and safety, developing multi-component synergistic pesticides provides a new route for efficient control of diseases. Most commercial compound formulations are open systems with non-adjustable released rates, resulting in a high frequency of applications. Meanwhile, although nano pesticide delivery systems constructed with different carrier materials have been extensively studied, realizing their actual scale-up production still has important practical significance due to the large-scale field application. In this study, a boscalid and pyraclostrobin dual-loaded nano pesticide system (BPDN) was constructed with industrial-grade carrier materials to facilitate the realization of large-scale production. The optimal industrial-scale preparation mechanism of BPDN was studied with surfactants as key factors. When agricultural emulsifier No.600 and polycarboxylate are used as the ratio of 1:2 in the preparation process, the BPDN has a spherical structure with an average size of 270 nm and exhibits superior physical stability. Compared with commercial formulation, BPDN maintains rate-stabilized release up to 5 times longer, exhibits better dispersion and spreading performance on foliar, has more than 20% higher deposition amounts, and reduces loss. A single application of BPDN could efficiently control tomato gray mold during the growing period of tomatoes due to extended duration and combinatory effectiveness, reducing two application times and labor costs. Toxicology tests on various objects systematically demonstrated that BPDN has improved safety for HepG2 cells, and nontarget organism earthworms. This research provides insight into creating safe, efficient, and environmentally friendly pesticide production to reduce manual operation times and labor costs. Accompanied by production strategies that can be easily scaled up industrially, this contributes to the efficient use of resources for sustainable agriculture.

Fabrication of thermo-responsive multicore microcapsules using a facile extrusion process

A process employing extrusion was used to produce multicore microcapsules composed of multiple beads. The inner beads were made from κ-carrageenan (κ-c), a thermo-responsive linear sulphated polymer whose gelling temperature ranges at 40-60 °C, depending on the concentration of κ-c polymer and the amount of potassium chloride used for gelation. The resulting beads were then enveloped by chitosan through gelation with sodium triphosphate. The pesticide ammonium glufosinate was encapsulated in the κ-c/chitosan multicore microcapsules for demonstration of controlled release of the encapsulant. It was found that in response to an external stimulus, such as elevated temperature or solar simulation, the microcapsules exhibit the gradual release of encapsulated pesticide molecules from multicore microcapsules, compared with beads only. This process of making multicore microcapsules can be extended to other polymer pairs based on applications. This work is relevant to agriculture, where the controlled-release of the pesticides or fertilizers could be triggered by the sun and/or temperature changes, thus extending the residual period of the chemicals as well as decreasing the extent of pollution by leaching of abundant chemicals.

Smart controlled-release nanopesticides based on metal-organic frameworks

The practical utilization rates of conventional pesticide formulations by target organisms are very low, which results in the pollution of ecological environments and the formation of pesticide residues in agricultural products. Water-based nanopesticide formulations could become alternative and effective formulations to eventually resolve the main issues of conventional pesticide formulations. In this feature article, we describe the design concept of smart (stimuli-responsive) controlled-release nanopesticides, which are created toward hierarchical targets (pests, pathogens, and foliage) in response to multidimensional stimuli from physiological and environmental factors (such as sunlight) of target organisms and plants, for achieving enhanced insecticidal and fungicidal efficacies. The pore sizes and functionalities of metal-organic frameworks (MOFs) can be fine-tuned through the choice of metal-containing units and organic ligands. Tailor-made MOF nanoparticles with large microporous or mesoporous sizes, as well as good biocompatibility and high thermal, mechanical, and chemical durabilities, are used to load pesticides within these pores followed by coating of plant polyphenols and natural polymers for stimuli-responsive controlled pesticide release. This feature article highlights our works on smart controlled-release MOF-based nanopesticides and also includes related works from other laboratories. The future challenges and promising prospects of smart controlled-release MOF-based nanopesticides are also discussed.

Toxicokinetics Explain Differential Freshwater Ecotoxicity of Nanoencapsulated Imidacloprid Compared to Its Conventional Active Ingredient

Agricultural applications of nanotechnologies necessitate addressing safety concerns associated with nanopesticides, yet research has not adequately elucidated potential environmental risks between nanopesticides and their conventional counterparts. To address this gap, we investigated the risk of nanopesticides by comparing the ecotoxicity of nanoencapsulated imidacloprid (nano-IMI) with its active ingredient to nontarget freshwater organisms (embryonic Danio rerio, Daphnia magna, and Chironomus kiinensis). Nano-IMI elicited approximately 5 times higher toxicity than IMI to zebrafish embryos with and without chorion, while no significant difference was observed between the two invertebrates. Toxicokinetics further explained the differential toxicity patterns of the two IMI analogues. One-compartmental two-phase toxicokinetic modeling showed that nano-IMI exhibited significantly slower elimination and subsequently higher bioaccumulation potential than IMI in zebrafish embryos (dechorinated), while no disparity in toxicokinetics was observed between nano-IMI and IMI in D. magna and C. kiinensis. A two-compartmental toxicokinetic model successfully simulated the slow elimination of IMI from C. kiinensis and confirmed that both analogues of IMI reached toxicologically relevant targets at similar levels. Although nanopesticides exhibit comparable or elevated toxicity, future work is of utmost importance to properly understand the life cycle risks from production to end-of-life exposures, which helps establish optimal management measures before their widespread applications.

Ageing influences the toxicity of two innovative nanofertilizers to the soil invertebrates Enchytraeus crypticus and Folsomia candida

The increasing global food demand is threatening the sustainability of agrifood production systems. The intensification of agricultural practices, with inadequate use of pesticides and fertilizers, poses major challenges to the good functioning of agroecosystems and drastically degrades the soil quality. Nanotechnology is expected to optimize the current farming practices and mitigate some associated impacts. Layered double hydroxides (LDHs) are a class of nanomaterials with high potential for use in agricultural productions, mostly due to their sustained release of nutrients. Considering its novelty and lack of studies on the terrestrial ecosystem, it is essential to assess potential long-term harmful consequences to non-target organisms. Our study aimed to evaluate the effect of Zn-Al-NO3 LDH and Mg-Al-NO3 LDH ageing on the survival and reproduction of two soil invertebrate species Enchytraeus crypticus and Folsomia candida. We postulated that the toxicity of nanomaterials to soil invertebrates would change with time, such that the ageing of soil amendments would mediate their impacts on both species. Our results showed that the toxicity of LDHs was species-dependent, with Zn-Al-NO3 LDH being more toxic to E. crypticus, while Mg-Al-NO3 LDH affected more F. candida, especially in the last ageing period, where reproduction was the most sensitive biological parameter. The toxicity of both nanomaterials increased with ageing time, as shown by the decrease of the EC50 values over time. The influence of LDH dissolution and availability of Zn and Mg in the soil pore water was the main factor related to the toxicity, although we cannot rule out the influence of other structural constituents of LDHs (e.g., nitrates and aluminium). This study supports the importance of incorporating ageing in the ecotoxicity testing of nanomaterials, considering their slow release, as effects on soil organisms can change and lead to more severe impacts on the ecosystem functioning.

Fabrication and application of carrier-free and carrier-based nanopesticides in pest management

Pesticides are widely used for pest control to promote sustained and stable growth of agricultural production. However, indiscriminate pesticide usage poses a great threat to environmental and human health. In recent years, nanotechnology has shown the ability to increase the performance of conventional pesticides and has great potential for improving adhesion to crop foliage, solubility, stability, targeted delivery, and so forth. This review discusses two types of nanopesticides, namely, carrier-free nanopesticides and carrier-based nanopesticides, that can precisely release necessary and sufficient amounts of active ingredients. At first, the basic characterization and preparation methods of these two distinct types of nanopesticides are briefly summarized. Subsequently, current applications and future perspectives on scientific examples and strategies for promoting the usage efficacy and reducing the environmental risks of these nanopesticides were also described. Overall, nanopesticides can promote higher crop yields and lay the foundation for sustainable agriculture and global food security.

Antibacterial Activity of Sustainable Thymol Nanoemulsion Formulations Against the Bacterial Blight Disease on Cluster Bean Caused by Xanthomonas axonopodis

The aim of the present study was nanoencapsulation of thymol to improve its poor water solubility and preservation of encapsulated thymol against environmental conditions. Another goal of the current investigation was to assess the antibacterial activity of thymol nanoemulsion as a sustainable biopesticide to control the bacterial blight of cluster bean. An oil-in-water (o/w) nanoemulsion containing thymol was prepared by a high-energy emulsification method using gum acacia and soya lecithin as natural emulsifiers/surfactants. The characterization of thymol nanoemulsion was carried out using dynamic light scattering (DLS), transmission electron microscope (TEM) and Fourier transform infrared spectroscopy (FTIR). A mean particle size of about 83.38 nm was recorded within 10 min of sonication. The stability analysis of optimized nanoemulsion showed kinetic stability up to two months of storage at room temperature. The thymol nanoemulsion was found to be spherical with a size ranging from 80-200 nm in diameter using transmission electron microscopy. Fourier transform infrared spectroscopy was used to study the molecular interaction between emulsifier/surfactant and thymol. The antibacterial studies of thymol nanoemulsion (0.01-0.06%, v/v) by growth inhibition analysis showed a potential antibacterial effect against Xanthomonas axonopodis pv. cyamopsidis (18-0.1 log CFU/ml). Further, in field experiments, foliar spray of the different concentration of thymol nanoemulsion (0.01-0.06%, v/v) significantly increased the percent efficiency of disease control (25.06-94.48%) and reduced the disease intensity (67.33-4.25%) of bacterial blight in cluster bean.

Agriculture and environmental management through nanotechnology: Eco-friendly nanomaterial synthesis for soil-plant systems, food safety, and sustainability

Through the advancement of nanotechnology, agricultural and food systems are undergoing strategic enhancements, offering innovative solutions to complex problems. This scholarly essay thoroughly examines nanotechnological innovations and their implications within these critical industries. Traditional practices are undergoing radical transformation as nanomaterials emerge as novel agents in roles traditionally filled by fertilizers, pesticides, and biosensors. Micronutrient management and preservation techniques are further enhanced, indicating a shift towards more nutrient-dense and longevity-oriented food production. Nanoparticles (NPs), with their unique physicochemical properties, such as an extraordinary surface-to-volume ratio, find applications in healthcare, diagnostics, agriculture, and other fields. However, concerns about their potential overuse and bioaccumulation raise unanswered questions about their health effects. Molecule-to-molecule interactions and physicochemical dynamics create pathways through which nanoparticles cause toxicity. The combination of nanotechnology and environmental sustainability principles leads to the examination of green nanoparticle synthesis. The discourse extends to how nanomaterials penetrate biological systems, their applications, toxicological effects, and dissemination routes. Additionally, this examination delves into the ecological consequences of nanomaterial contamination in natural ecosystems. Employing robust risk assessment methodologies, including the risk allocation framework, is recommended to address potential dangers associated with nanotechnology integration. Establishing standardized, universally accepted guidelines for evaluating nanomaterial toxicity and protocols for nano-waste disposal is urged to ensure responsible stewardship of this transformative technology. In conclusion, the article summarizes global trends, persistent challenges, and emerging regulatory strategies shaping nanotechnology in agriculture and food science. Sustained, in-depth research is crucial to fully benefit from nanotechnology prospects for sustainable agriculture and food systems.

Perfect cooperative pest control via nano-pesticide and natural predator: High predation selectivity and negligible toxicity toward predatory stinkbug

The improper use of synthetic pesticides has caused adverse effects on global ecosystems and human health. As a part of sustainable pest management strategy, natural predators, along with nano-pesticides, have made significant contributions to ecological agriculture. The cooperative application of both approaches may overcome their limitations, substantially reducing pesticide application while controlling insect pests efficiently. Herein, the current study introduced a cationic star polymer (SPc) to prepare two types of nano-pesticides, which were co-applied with predatory stinkbugs Picromerus lewisi to achieve perfect cooperative pest control. The SPc exhibited nearly no toxicity against predatory stinkbugs at the working concentration, but it led to the death of predatory stinkbugs at extremely high concentration with the lethal concentration 50 (LC50) value of 13.57 mg/mL through oral feeding method. RNA-seq analysis revealed that the oral feeding of SPc could induce obvious stress responses, leading to stronger phagocytosis, exocytosis, and energy synthesis to ultimately result in the death of predatory stinkbugs. Then, the broflanilide and chlorobenzuron were employed to prepare the self-assembled nano-pesticides via hydrogen bond and Van der Waals force, and the complexation with SPc broke the self-aggregated structures of pesticides and reduced their particle sizes down to nanoscale. The bioactivities of prepared nano-pesticides were significantly improved toward common cutworm Spodoptera litura with the corrected mortality increase by approximately 30%. Importantly, predatory stinkbugs exhibited a strong predation selectivity for alive common cutworms to reduce the exposure risk of nano-pesticides, and the nano-pesticides showed negligible toxicity against predators. Thus, the nano-pesticides and predatory stinkbugs could be applied simultaneously for efficient and sustainable pest management. The current study provides an excellent precedent for perfect cooperative pest control via nano-pesticide and natural predator.

The key factors of solid nanodispersion for promoting the bioactivity of abamectin

Solid nanodispersion (SND) is an important variety of nanopesticides which have been extensively studied in recent years. However, the key influencing factors for bioactivity enhancement of nanopesticides remain unclear, which not only limits the exploration of relevant mechanisms, but also hinders the precise design and development of nanopesticides. In this study, we explored the potential of SND in enhancing the bioactivity of nanopesticides, specifically focusing on abamectin SND prepared using a self-emulsifying-carrier solidifying technique combined with parameter optimization. Our formulation, consisting of 8% abamectin, 1% antioxidant BHT (2,6-di-tert-butyl-4-methylphenol), 12% complex surfactants, and 79% sodium benzoate, significantly increased the pseudo-solubility of abamectin by at least 3300 times and reduced its particle size to a mere 15 nm, much smaller than traditional emulsion in water (EW) and water-dispersible granule (WDG) forms. This reduction in particle size and increase in surface activity resulted in improved foliar adhesion and retention, enabling a more efficient application without the need for organic solvents. The inclusion of antioxidants also enhanced photostability compared to EW, and overall stability tests confirmed SND's resilience under various storage conditions. Bioactivity tests demonstrated a marked increase in toxicity against diamondback moths (Plutella xylostella L.) with abamectin SND, which exhibited 3.7 and 7.6 times greater efficacy compared to EW and WDG, respectively. These findings underscore the critical role of small particle size, high surface activity, and strong antioxidant properties in improving the performance and bioactivity of abamectin SND, highlighting its significance in the design and development of high-efficiency, eco-friendly nanopesticides and contributing valuably to sustainable agricultural practices.

Recent Advances in Stimulus-Responsive Nanocarriers for Pesticide Delivery

In an effort to make pesticide use safer, more efficient, and sustainable, micro-/nanocarriers are increasingly being utilized in agriculture to deliver pesticide-active agents, thereby reducing quantities and improving effectiveness. In the use of nanopesticides, the choice to further design and prepare pesticide stimulus-responsive nanocarriers based on changes in the plant growth environment (light, temperature, pH, enzymes, etc.) has received more and more attention from researchers. Based on this, this paper examines recent advancements in nanomaterials for the design of stimulus-responsive micro-/nanocarriers. It delves into the intricacies of preparation methods, material enhancements, in vivo/ex vivo controlled release, and application techniques for controlled release formulations. The aim is to provide a crucial reference for harnessing nanotechnology to pursue reduced pesticide use and increased efficiency.

Critical Review: Uptake and Translocation of Organic Nanodelivery Vehicles in Plants

Nanodelivery vehicles (NDVs) are engineered nanomaterials (ENMs) that, within the agricultural sector, have been investigated for their ability to improve uptake and translocation of agrochemicals, control release, or target specific tissues or subcellular compartments. Both inorganic and organic NDVs have been studied for agrochemical delivery in the literature, but research on the latter has been slower to develop than the literature on the former. Since the two classes of nanomaterials exhibit significant differences in surface chemistry, physical deformability, and even colloidal stability, trends that apply to inorganic NDVs may not hold for organic NDVs, and vice versa. We here review the current literature on the uptake, translocation, biotransformation, and cellular and subcellular internalization of organic NDVs in plants following foliar or root administration. A background on nanomaterials and plant physiology is provided as a leveling ground for researchers in the field. Trends in uptake and translocation are examined as a function of NDV properties and compared to those reported for inorganic nanomaterials. Methods for assessing fate and transport of organic NDVs in plants (a major bottleneck in the field) are discussed. We end by identifying knowledge gaps in the literature that must be understood in order to rationally design organic NDVs for precision agrochemical nanodelivery.

Herbicidal weed management practices: History and future prospects of nanotechnology in an eco-friendly crop production system

Weed management is an important aspect of crop production, as weeds cause significant losses in terms of yield and quality. Various approaches to weed management are commonly practiced by crop growers. Due to limitations in other control methods, farmers often choose herbicides as a cost-effective, rapid and highly efficient weed control strategy. Although herbicides are highly effective on most weeds, they are not a complete solution for weed management because of the genetic diversity and evolving flexibility of weed communities. The excessive and indiscriminate use of herbicides and their dominance in weed control have triggered the rapid generation of herbicide-resistant weed species. Moreover, environmental losses of active ingredients in the herbicides cause serious damage to the environment and pose a serious threat to living organisms. Scientific advances have enabled nanotechnology to emerge as an innovation with real potential in modern agriculture, adding a new dimension in the preparation of controlled release formulations (CRF) of herbicides. Here the required amount of active ingredients is released over longer periods of time to obtain the desired biological efficacy whilst reducing the harmful effects of these chemicals. Various organic and inorganic carrier materials have been utilised in CRF and researchers have a wide range of options for the synthesis of eco-friendly carrier materials, especially those with less or no toxicity to living organisms. This manuscript addresses the history, progress, and consequences of herbicide application, and discusses potential ways to reduce eco-toxicity due to herbicide application, along with directions for future research areas using the benefits of nanotechnology.

Flavonoids as Insecticides in Crop Protection-A Review of Current Research and Future Prospects

Pesticide overuse in agricultural systems has resulted in the development of pest resistance, the impoverishment of soil microbiota, water pollution, and several human health issues. Nonetheless, farmers still depend heavily on these agrochemicals for economically viable production, given the high frequency at which crops are affected by pests. Phytopathogenic insects are considered the most destructive pests on crops. Botanical pesticides have gained attention as potential biopesticides and complements to traditional pesticides, owing to their biodegradability and low toxicity. Plant-based extracts are abundant in a wide variety of bioactive compounds, such as flavonoids, a class of polyphenols that have been extensively studied for this purpose because of their involvement in plant defense responses. The present review offers a comprehensive review of current research on the potential of flavonoids as insecticides for crop protection, addressing the modes and possible mechanisms of action underlying their bioactivity. The structure-activity relationship is also discussed. It also addresses challenges associated with their application in pest and disease management and suggests alternatives to overcome these issues.

In vivo evaluation of the neurogenotoxic effects of exposure to validamycin A in neuroblasts of Drosophila melanogaster larval brain

Agriculture commonly utilizes crop protection products to tackle infestations from fungi, parasites, insects, and weeds. Validamycin A, an inhibitor of trehalase, possesses antibiotic and antifungal attributes. Epidemiological evidence has led to concerns regarding a potential link between pesticide usage and neurodegenerative diseases. The fruit fly, Drosophila melanogaster, has been recognized as a reliable model for genetic research due to its significant genetic similarities with mammals. Here, we propose to use D. melanogaster as an effective in vivo model system to investigate the genotoxic risks associated with exposure to validamycin A. In this study, we performed a neurotoxic evaluation of validamycin A in D. melanogaster larvae. Several endpoints were evaluated, including toxicity, intracellular oxidative stress (reactive oxygen species), intestinal damage, larval behavior (crawling behavior, light/dark sensitivity assay, and temperature sensitivity assay), locomotor (climbing) behavior, and neurogenotoxic effects (impaired DNA via Comet assay, enhanced by Endo III and formamidopyrimidine DNA glycosylase [FPG]). The results showed that exposure to validamycin A, especially at higher doses (1 and 2.5 mM), induced DNA impairment in neuroblasts as observed by Comet assay. Both larvae and adults exhibited behavioral changes and produced reactive oxygen species. Most importantly, this research represents a pioneering effort to report neurogenotoxicity data specifically in Drosophila larval neuroblasts, thus underscoring the importance of this species as a testing model in exploring the biological impacts of validamycin A. The in vivo findings from the experiments are a valuable and novel addition to the existing validamycin A neurogenotoxicity database.

Enhanced dosage delivery of pesticide under unmanned aerial vehicle condition for peanut plant protection: tank-mix adjuvants and formulation improvement

BACKGROUND

Suspension concentrate (SC) is one of the most widely used formulations for agricultural plant protection. With the rapid development of unmanned aerial vehicle (UAV) plant protection, the problems of spray drift, droplet rebound and poor wettability in the application of SC from UAVs have attracted wide attention. Although some tank-mix adjuvants have been used to enhance dosage delivery for UAV, their effects and mechanisms are not fully clear, and few formulations are specifically designed for UAV.

RESULTS

The type and concentration of tank-mix adjuvant affect the dosage delivery of SC. MO501 can significantly reduce DV<100μm , and inhibit droplet rebound on peanut leaves at concentrations ≥0.5%. Silwet 408 can achieve complete wetting and superspreading after adding ≥0.2% concentrations, but only ≥0.5% can inhibit rebound. XL-70 shows excellent regulation ability even at low concentration, and 0.2% concentration can simultaneously suppress impact and promote spreading. Besides, the formulation oil dispersion (OD) can significantly reduce the driftable fine fraction and inhibit rebound at dilution ratios of ≤250-fold, thus enhancing dosage delivery.

CONCLUSION

SC is prone to rebound on hydrophobic leaf surfaces and shows poor wetting and spreading properties. Appropriate types and concentrations of tank-mix adjuvants and formulation improvement are two effective strategies for improving the dosage delivery of pesticides, whereas the addition of inappropriate adjuvants may cause potential risks instead. These findings provide guidance for the rational selection of tank-mix adjuvants and potential applications of OD for UAV plant protection. © 2023 Society of Chemical Industry.

Effect of Brucea javanica Oil on the Toxicity of β-Cypermethrin Emulsifiable Concentrate Formulation

Enhancing the performance of traditional pesticide formulations by improving their leaf surface wetting capabilities is a crucial approach for maximizing the pesticide efficiency. This study develops an emulsifiable concentrate (EC) of 4.5% β-cypermethrin containing Brucea javanica oil (BJO). The incorporation of BJO aims to improve the leaf-wetting properties of the EC formulation and enhance its insecticidal effectiveness. The droplet size and emulsion characteristics of β-CYP EC emulsion with varying concentrations of the emulsifier were evaluated, and changes after incorporating BJO were assessed to develop the optimal formulation. A comprehensive comparison was conducted among commercial 4.5% β-cypermethrin EC (β-CYP EC-1), 4.5% β-cypermethrin EC with BJO (β-CYP EC-2), and 4.5% β-cypermethrin EC without BJO (β-CYP EC-3). This comparison encompassed various factors including storage stability, insecticidal activity, cytotoxicity, and wetting performance on cabbage leaves. The results indicated that the ideal emulsifier concentration was 15% emulsifier 0201B. β-CYP EC-2 demonstrated superior wetting properties on cabbage leaves (the wetting performance of β-CYP EC-2 emulsion on cabbage leaves is 2.60 times that of the β-CYP EC-1 emulsion), heightened insecticidal activity against the third larvae of Plutella xylostella [diamondback moth (DBM)] [the insecticidal activity of the β-CYP EC-2 emulsion against the third larvae of DBM is 1.93 times that of the β-CYP EC-1 emulsion (12 h)], and more obvious inhibitory effects on the proliferation of DBM embryo cells than the other tested formulations. These findings have significant implications for advancing pest control strategies and promoting sustainable and effective agricultural practices.

Preparation and Comprehensive Evaluation of the Efficacy and Safety of Chlorantraniliprole Nanosuspension

Chlorantraniliprole is a broad-spectrum insecticide that has been widely used to control pests in rice fields. Limited by its low solubility in both water and organic solvents, the development of highly efficient and environmentally friendly chlorantraniliprole formulations remains challenging. In this study, a low-cost and scalable wet media milling technique was successfully employed to prepare a chlorantraniliprole nanosuspension. The average particle size of the extremely stable nanosuspension was 56 nm. Compared to a commercial suspension concentrate (SC), the nanosuspension exhibited superior dispersibility, as well as superior foliar wetting and retention performances, which further enhanced its bioavailability against Cnaphalocrocis medinalis. The nanosuspension dosage could be reduced by about 40% while maintaining a comparable efficacy to that of the SC. In addition, the chlorantraniliprole nanosuspension showed lower residual properties, a lower toxicity to non-target zebrafish, and a smaller effect on rice quality, which is conducive to improving food safety and the ecological safety of pesticide formulations. In this work, a novel pesticide-reduction strategy is proposed, and theoretical and data-based support is provided for the efficient and safe application of nanopesticides.

Encapsulated nanopesticides application in plant protection: Quo vadis?

The increased global food insecurity due to the growing population can be addressed with precision and sustainable agricultural practices. To tackle the issues regarding food insecurity, farmers used different agrochemicals that improved plant growth and protection. Among these agrochemicals, synthetic pesticides used for plant protection in the agricultural field have various disadvantages. Conventional applications of synthetic pesticides have drawbacks such as rapid degradation, poor solubility, and non-target effects, as well as increased pesticide runoff that pollutes the environment. Nanotechnology has evolved as a potential solution to increase agricultural productivity through the development of different nanoforms of agrochemicals such as nanopesticides, nano-fabricated fertilizers, nanocapsules, nanospheres, nanogels, nanofibers, nanomicelles, and nano-based growth promoters. Encapsulation of these pesticides inside the nanomaterials has provided good biocompatibility over conventional application by inhibiting the early degradation of active ingredients (AI), increasing the uptake and adhesion of pesticides, improving the stability, solubility, and permeability of the pesticides, and decreasing the environmental impacts due to the pesticide runoff. In this review, different nanoforms of encapsulated pesticides and their smart delivery systems; nanocarriers in RNA interference (RNAi) based pesticides; environmental fate, practical implications, management of nanopesticides; and future perspectives are discussed.

Application of nanopesticides and its toxicity evaluation through Drosophila model

Insects feed on plants and cause the growth of plants to be restricted. Moreover, the application of traditional pesticides causes harmful effects on non-target organisms and poses serious threats to the environment. The use of conventional pesticides has negative impacts on creatures that are not the intended targets. It also presents significant risks to the surrounding ecosystem. Insects that are exposed to these chemicals eventually develop resistance to them. This review could benefit researcher for future development of nanopesticides research. This is because a holistic approach has been taken to describe the multidimensional properties of nanopesticides, health and environmental concerns and its possible harmful effects on non-target organisms and physiochemical entities. The assessment of effects of the nanopesticides is also being discussed through the drosophotoxicology. The future outlooks have been suggested to take a critical analysis before commercialization or formulation of the nanopesticides.

Smart, degradable, and eco-friendly carboxymethyl cellulose-CaII hydrogel-like networks gated MIL-101(FeIII) nanoherbicides for paraquat delivery

Nanopesticides have been selected as one of the top 10 chemical innovations for enhancing the efficacy and safety of agrochemicals. Herein, smart, degradable, and eco-friendly metal-organic framework MIL-101(FeIII) nanoherbicides coated with carboxymethyl cellulose-CaII (CMC-CaII) cross-linking hydrogel-like networks are synthesized via a simple strategy. The coating of the CMC-CaII hydrogel-like gatekeepers is oriented by the coordination unsaturated FeIII clusters on the surfaces of the MIL-101(FeIII) nanocarriers to form a dense film network to prevent paraquat (PQ) leakage. Based on the stimuli factors (acid/basic pH, GSH, phosphates, and EDTA) of physiological and natural environments of target plants, the nanoherbicides are combined with five stimuli-responsive properties to attain the various controlled release of packaged PQ by the disassembly of the gatekeepers and/or the degradation of the MOF skeleton structure. More importantly, based on the stimuli-responsive controlled release mechanisms, the eco-friendly nanocarriers are ultimately degraded against bioaccumulation in plants or soil. The coating of natural CMC could promote the spreading of PQ owing to improvement of wettability for aqueous droplets of nanoherbicides on hydrophobic foliage. The PQ trapped in nanocarriers can effectively prevent PQ degradation, which showed that cumulative degradation rate is ca. 2.6 times lower than that of technical PQ under UV irradiation. The prepared nanoherbicides loaded with PQ show good control efficacy against weeds by controlling the release of PQ; good safety on seed germination (germination rate 97.32-99.67 %), seedling emergence (emergence rate 95.53-99.67 %), and are beneficial for the growth of wheat seedling (increase rate of plant height 1.89-6.97 % and 0.54-5.67 % after 7 and 15 days of seedling emergence, respectively) in the greenhouse; good biosafety for honeybees (Apis mellifera L.), which shows that lethal rates were 2.04 and 2.55 times lower than technical PQ for incubation 24 and 48 h, respectively. The nanoherbicides have potential applications in the field for PQ green agriculture.

MXenes vs. clays: emerging and traditional 2D layered nanoarchitectonics

Although MXene materials are considered an emerging research topic, they are receiving considerable interest because, like metals and graphene, they are good electronic conductors but with the particularity that they have a marked hydrophilic character. Having a structural organization and properties close to those of clay minerals (natural silicates typically with a lamellar morphology), they are sometimes referred to as "conducting clays" and exhibit colloidal, surface and intercalation properties also similar to those of clay minerals. The present contribution aims to inform and discuss the nature of MXenes in comparison with clay phyllosilicates, taking into account their structural analogies, outstanding surface properties and advanced applications. The current in-depth understanding of clay minerals may represent a basis for the future development of MXene-derived nanoarchitectures. Comparative examples of the preparation, and studies on the properties and applications of various nanoarchitectures based on clays and MXenes have been included in the present work.

Magnetic Hydrogel Microrobots as Insecticide Carriers for In Vivo Insect Pest Control in Plants

The cost of insect pests to human society exceeds USD70 billion per year worldwide in goods, livestock, and healthcare services. Therefore, pesticides are needed to prevent insect damage despite the secondary effects of these chemical agents on non-target organisms. Chemicals encapsulation into carriers is a promising strategy to improve their specificity. Hydrogel-based microrobots show enormous potential as chemical carriers. Herein, hydrogel chitosan magnetic microrobots encapsulating ethyl parathion (EP)-CHI@Fe3 O4 are used to efficiently kill mealworm larvae (Tenebrio molitor). The mechanism takes advantage of pH-responsive chitosan degradation at Tenebrio molitor midgut pH to efficiently deliver pesticide into the mealworm intestinal tract in just 2 h. It is observed that under a transversal rotating magnetic field, mealworm populations show higher mortality after 30 min compared to free pesticide. This example of active pesticide carriers based on soft microrobots opens new avenues for microrobots applications in the agrochemical field as active chemical carriers.

Ascendancy of pyraclostrobin nanocapsule formulation against Rhizoctonia solani: From a perspective of fungus

High-performance pesticide formulations are essential for sustainable agriculture. Among these, nano-pesticides exhibit great advantages in pest control because of their unique size effects. However, the direct effects of nano-formulation fungicides on fungal pathogens remain largely unexplored. In this study, three qualified formulations, suspension concentrate (SC), microcapsules (CS), and nanocapsules (NCS) of pyraclostrobin (PYR) were prepared and utilized to reveal their biocontrol activities against Rhizoctonia solani. Among these three formulations, NCS exhibited notable biocontrol efficacy against R. solani exemplified by an EC50 of 0.319 mg/L for mycelia, distortion of mycelia and abnormalities in cell ultrastructure. Moreover, NCS displayed excellent internalization within R. solani mycelia, contributing to severe damage to cell membrane permeability. Importantly, an equivalent quantity of NCS-PYR showed potent inhibitory effects on the target pathogen, as indicated by reduced adenosine triphosphate (ATP) content and mitochondrial Complex III activity. The NCS consistently exhibited superior in vivo protective and curative activities against R. solani compared to those of CS and SC in rice and faba bean. In summary, we uncovered the strength of rapid efficacy and biocontrol activity of NCS against R. solani and elucidated the advantages of NCS-PYR from the perspective of the target pathogen in agriculture.

Sulfur nanocomposites with insecticidal effect for the control of Bactericera cockerelli

The purpose of this research was to synthesize nanocomposites consisting of sulfur nanoparticles coated with eucalyptus and rosemary essential oils to determine the insecticidal effect in the control of nymphs of paratrioza (Bactericera cockerelli (Sulc) (Hemiptera: Triozidae)) in potato crops. A solution of thiosulfate was reduced to elemental sulfur, and the sulfur nanoparticles were coated with eucalyptus and rosemary essential oils with the three concentrations of 0.25%, 0.5%, and 0.75%. The samples were characterized by UV-visible spectroscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy, and scanning electron microscopy. The insecticidal efficacy of the nanocomposites was evaluated in the entomology laboratory 24, 48, and 72 h after application. Furthermore, efficacy was compared to the commercial insecticide thiamethoxam (0.25%) and a control. The results show that eucalyptus nanocomposites with oil concentrations of 0.25%, 0.5%, and 0.75% and rosemary nanocomposites with an oil concentration of 0.5% have an insecticidal efficacy of 100% for the control of insect nymphs 24 h after application. The insecticidal efficacy of rosemary nanocomposites with oil concentrations of 0.25% and 0.75% increases over time and reaches 100% at 24 and 72 h, respectively. The synthesized nanocomposites are more effective in controlling nymphs of paratrioza than the commercial insecticide thiamethoxam; thus, they could be used for the development of new insecticides.

Chitosan-Delivered Chlorantraniliprole for Pest Control: Preparation Optimization, Deposition Behavior, and Application Potential

Chitosan has emerged as a promising biopolymer carrier for the sustained release of pesticides owing to its good biocompatibility, biodegradability, and bioactivity. In this work, a controlled-release formulation of insecticide chlorantraniliprole was fabricated through coprecipitation-based synchronous encapsulation with chitosan, where the optimum preparation conditions, storage stability, deposition behavior, and application potential were investigated. Preparation of optimization data from response surface methodology showed high correlation coefficient (R2) of 0.9875 and adjusted coefficient (Radj2) of 0.9715. The resulting formulation displayed good loading content of 28.39%, high encapsulation efficiency of 75.71%, and good storage stability. Compared with the commercial suspension concentrate, the formulation exhibited better wettability and retention behaviors on plant leaves. Excitingly, effective control against one species of mealybug genus Paraputo Laing (outside the killing spectrum) on the Hippeastrum reticulatum plant was successfully achieved by spraying the controlled-release formulation at different time intervals. This work indicates the good potential of the developed formulation in expanding the application scope of chlorantraniliprole, which shows a new strategy for sustainable pest management.

Advanced nanopesticides: Advantage and action mechanisms

The use of various chemical substances to control pests, diseases, and weeds in the field is a necessary part of the agricultural development process in every country. While the application of pesticides can improve the quality and yield of crops, plant resistance and the harm caused by pesticide residues to the environment and humans have led to the search for greener and safer pesticide formulations to improve the current situation. In recent years, nanopesticides (NPts) have shown great potential in agriculture due to their high efficiency, low toxicity, targeting, resistance, and controlled slow release demonstrated in the experimental stage. Commonly used approaches to prepare NPts include the use of nanoscale metal materials as active ingredients (AI) (ingredients that can play a role in insecticide, sterilization and weeding) or the construction of carriers based on commonly used pesticides to make them stable in nano-sized form. This paper systematically summarizes the advantages and effects of NPts over conventional pesticides, analyzes the formation and functions of NPts in terms of structure, AI, and additives, and describes the mechanism of action of NPts. Despite the feasibility of NPts use, there is not enough comprehensive research on NPts, which must be supplemented by more experiments in terms of biotoxicology and ecological effects to provide strong support for NPts application.

Coprecipitation-based synchronous chlorantraniliprole encapsulation with chitosan: carrier-pesticide interactions and release behavior

BACKGROUND

Controlled-release pesticide formulations have emerged as a promising approach towards sustainable pest control. Herein, an environment-friendly formulation of insecticide chlorantraniliprole (CAP) was fabricated through a simple approach of coprecipitation-based synchronous encapsulation by chitosan (CTS), with carrier-pesticide interaction mechanism and release behavior investigated.

RESULTS

The resulting CAP/CTS controlled-release formulation (CCF) showed a good loading content of 28.1% and a high encapsulation efficiency of 75.6%. Instrument determination in combination with molecular dynamics (MD) simulations displayed that the primary interactions between CAP and CTS were physical adsorption and complicated hydrogen (H)-bonds, which formed dominantly between NH in amides [or nitrogen (N) in ring structures] of CAP and hydroxyl (or amino) groups of CTS, as well as oxygen (O) in CAP with hydrogen in CTS or H2 O molecules. The in vitro release tests exhibited obvious pH/temperature sensitivity, with release dynamics following the first-order or Ritger-Peppas model. As the temperature increased, the CAP release process of the Ritger-Peppas model changed from Case-II to anomalous transport, and ultimately to a Fickian diffusion mechanism. The control effect against Plutella xylostella larvae also was evaluated by toxicity tests, where comparable efficacy of CCF to the commercial suspension concentrate was obtained.

CONCLUSION

The innovative, easy-to-prepare CCF can be used as a formulation with obvious pH/temperature sensitivity and good efficacy on target pests. This work contributes to the development of efficient and safe pesticide delivery systems, especially using the natural polymer materials as carriers. © 2023 Society of Chemical Industry.

Sustained Agricultural Spraying: From Leaf Wettability to Dynamic Droplet Impact Behavior

Crop production and quality safety system have the potential to nurture human health and improve environmental sustainability. Providing a growing global population with sufficient and healthy food is an immediate challenge. However, this system largely depends on the spraying of agrochemicals. Crop leaves are covered with different microstructures, exhibiting distinct hydrophilic, hydrophobic, or even superhydrophobic wetting characteristics, thus leading to various deposition difficulties of sprayed droplets. Here, the relationship between wettability and surface microstructure in different crop leaves from biological and interfacial structural perspectives is systematically demonstrated. A relational model is proposed in which complex microstructures lead to stronger leaf hydrophobicity. And adding surfactant with a faster dynamically migrating velocity and reducing droplet size can improve agrochemical precise deposition. These contribute toward highly accurate and efficient targeted applications with fewer agrochemicals use and promote sustainable models of eco-friendly agriculture systems.

Bactericidal potential of different size sericin-capped silver nanoparticles synthesized by heat, light, and sonication

Present study was aimed to assess the bactericidal potential of sericin-capped silver nanoparticles (Se-AgNPs) synthesized by heat, light, and sonication. Se-AgNPs were characterized by size analyzer, UV spectrophotometry, energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy. Average size of Se-AgNPs synthesized by heat, light and sonication was 53.60, 78.12, and 7.49 nm, respectively. All (10) bacterial strains were exposed to Se-AgNPs prepared from different methods to compare their antibacterial potentials. Largest zone of inhibition (13 ± 1.15 mm) was observed for sonication-based nanoparticles (NPs) against Klebseilla pneumoniae while the smallest zone of light assisted NPs against Serratia rubidaea (5 ± 1 mm). Bacterial strains were also exposed to different concentrations (0.2%, 0.3%, and 0.6%) of Se-AgNPs which showed largest zone (12 ± 1 mm) of inhibition for 0.4% of Se-AgNPs against Protius mirabilis and smallest zone (5 ± 1.154 mm) for 0.3% of Se-AgNPs against Escherichia coli. Furthermore, effect of different temperatures (5°C, 37°C, and 60°C) and pH (3, 7, and 12) on the efficacy and stability of Se-AgNPs was also evaluated against different bacterial strains. Sonication mediated NPs showed highest bactericidal results against K. pneumoniae (F3,8  = 6.154; p = 0.018) with smallest size NPs (7.49 nm) while lowest bactericidal results against S. rubidaea (5 ± 1 mm) were shown with largest size (78.12 nm) NPs prepared by natural light. These variations of bactericidal activities of NPs with difference size endorse that the Se-AgNPs with smallest size have highest antibacterial activity than larger size NPs. Moreover, Se-AgNPs maintain their bactericidal potency at wide range of temperature and pH, hence seemed stable.

Graphene as a nano-delivery vehicle in agriculture - current knowledge and future prospects

Graphene has triggered enormous interest in, and exploration of, its applications in diverse areas of science and technology due to its unique properties. While graphene has displayed great potential as a nano-delivery system for drugs and biomolecules in biomedicine, its application as a nanocarrier in agriculture has only begun to be explored. Conventional fertilizers and agricultural delivery systems have a number of disadvantages, such as: fast release of the active ingredient, low delivery efficiency, rapid degradation and low stability that often leads to their over-application and consequent environmental problems. Advanced nano fertilizers with high carrier efficiency and slow and controlled release are now considered the gold standard for promoting agricultural sustainability while protecting the environment. Graphene's attractive properties include large surface area, chemical stability, mechanical stability, tunable surface chemistry and low toxicity making it a promising material on which to base agricultural delivery systems. Recent research has demonstrated considerable success in the use of graphene for agricultural applications, including its utilization as a delivery vehicle for plant nutrients and crop protection agents, as well as in post-harvest management of crops. This review, therefore, presents a comprehensive overview of the current status of graphene-based nanocarriers in agriculture. Additionally, the review outlines the surface functionalization methods used for effective molecular delivery, various strategies for nano-vehicle design and the underlying features necessary for a graphene-based agro-delivery system. Finally, the review discusses directions for further research in optimization of graphene-based nanocarriers.

A general supramolecular adjuvant for pesticides based on host-guest recognition

BACKGROUND

Pesticides are indispensable in agriculture and can effectively improve the yields and quality of crops. Due to their weak water solubility, most pesticides need to be dissolved by adding solubilizing adjuvants. In this work, based on molecular recognition of the macrocyclic host, we developed a novel supramolecular adjuvant, called sulfonated azocalix[4]arene (SAC4A), which significantly improves the water solubility of pesticides.

RESULTS

SAC4A presents multiple advantages, including high water solubility, strong binding affinity, universality, and simple preparation. SAC4A showed an average binding constant value of 1.66 × 105  M-1 for 25 pesticides. Phase solubility results indicated that SAC4A increased the water solubility of pesticides by 80-1310 times. The herbicidal, fungicidal, and insecticidal activities of supramolecular formulations were found to be superior to those of technical pesticides, and the herbicidal effects were even better than those of commercial formulations.

CONCLUSION

Overall results revealed the potential of SAC4A to improve the solubility and effectiveness of pesticides, providing a new development idea for the application of adjuvants in agriculture. © 2023 Society of Chemical Industry.

One-pot construction of epoxy resin nanocarrier delivering abamectin and its efficacy on plant root-knot nematodes

BACKGROUND

The complex preparation process and storage instability of nanoformulations hinders their development and commercialization. In this study, nanocapsules loaded with abamectin were prepared by interfacial polymerization at room temperature and ordinary pressure using the monomers of epoxy resin (ER) and diamine. The potential mechanisms of primary amine and tertiary amine in influencing the shell strength of the nanocapsules and the dynamic stability of abamectin nanocapsules (Aba@ER) in the suspension system were systematically researched.

RESULTS

The tertiary amine catalyzed the self-polymerization of epoxy resin into linear macromolecules with unstable structures. The structural stability of the diamine curing agent with a primary amine group played a key role in enhancing the structural stability of the polymers. The intramolecular structure of the nanocapsule shell formed by isophorondiamine (IPDA) crosslinked epoxy resin has multiple spatial conformations and a rigid saturated six-membered ring. Its structure was stable, and the shell strength was strong. The formulation had stable dynamic changes during storage and maintained excellent biological activity. Compared with emulsifiable concentrate (EC), Aba@ER/IPDA had superior biological activity, and the field efficacy on tomato root-knot nematode was enhanced by approximately 31.28% at 150 days after transplanting.

CONCLUSION

Aba@ER/IPDA, which has excellent storage stability and simple preparation technology, can provide a nanoplatform with industrial prospects for efficient pesticide delivery. © 2023 Society of Chemical Industry.

Different Size Formulations of Fluopyram: Preparation, Antifungal Activity, and Accumulation in the Fungal Pathogen Botrytis cinerea

Nanotechnology is revolutionizing the efficient production and sustainable development of modern agriculture. Understanding the pesticide activity of both nano- and conventional methods is useful for developing new pesticide formulations. In this study, three solid fluopyram formulations with varying particle sizes were developed, and the mechanisms underlying the difference in the antifungal activity among these formulations were investigated. Wet media milling combined with freeze drying was used to prepare fluopyram nanoparticles (FLU-NS) and a micron-sized solid formulation (FLU-MS), and a jet grinding mill was employed to fabricate fluopyram wettable powder (FLU-WP). The mean particle sizes of FLU-NS, FLU-MS, and FLU-WP were 366.8 nm, 2.99 μm, and 10.16 μm, respectively. Notably, FLU-NS displayed a toxicity index against Botrytis cinerea (gray mold) that was approximately double those of FLU-MS and FLU-WP. Similar trends were noticed in the antifungal tests on Alternaria solani. The uptake of FLU-NS by B. cinerea was approximately twice that of FLU-MS and FLU-WP, indicating that fluopyram nanoparticles are more easily taken up by the pathogen (B. cinerea), and display better bioactivity than the larger fluopyram particles. Therefore, the nanosizing of pesticides appears to be a viable strategy to enhance efficiency without increasing the amount of pesticide used.

Fungi-mediated synthesis of nanoparticles: characterization process and agricultural applications

In the field of nanotechnology, the use of biologically active products from fungi for the reduction and synthesis of nanoparticles as an alternative to toxic chemicals has received extensive attention, due to their production of large quantities of proteins, high yields, easy handling, and the low toxicity of the residues. Fungi have become valuable tools for the manufacture of nanoparticles in comparison with other biological systems because of their enhanced growth control and diversity of metabolites, including enzymes, proteins, peptides, polysaccharides, and other macro-molecules. The ability to use different species of fungi and to perform the synthesis under different conditions enables the production of nanoparticles with different physicochemical characteristics. Fungal nanotechnology has been used to develop and offer products and services in the agricultural, medicinal, and industrial sectors. Agriculturally, it has found applications in plant disease management, crop improvement, biosensing, and the production of environmentally friendly, non-toxic pesticides and fertilizers to enhance agricultural production in general. The subject of this review is the application of fungi in the synthesis of inorganic nanoparticles, characterization, and possible applications of fungal nanoparticles in the diverse agricultural sector. The literature shows potential uses of fungi in biogenic synthesis, enabling the production of nanoparticles with different physiognomies. © 2023 Society of Chemical Industry.

Investigation of herbicide sorption-desorption using pristine and organoclays to explore the potential carriers for controlled release formulation

Injudicious application of available commercial herbicide formulations leads to water, air and soil contamination, which adversely affect the environment, ecosystems and living organisms. Controlled release formulation (CRFs) could be an effective way to reduce the problems associated with commercially available herbicides. Organo-montmorillonites are prominent carrier materials for synthesising CRFs of commercial herbicides. Quaternary amine and organosilane functionalised organo-montmorillonite and pristine montmorillonite were used to investigate their potential as suitable carriers for CRFs in herbicide delivery systems. The experiment involved a batch adsorption process with successive dilution method. Results revealed that pristine montmorillonite is not a suitable carrier for CRFs of 2,4-D due to its low adsorption capacity and hydrophilic nature. Conversely, octadecylamine (ODA) and ODA-aminopropyltriethoxysilane (APTES) functionalised montmorillonite has better adsorption capacities. Adsorption of 2,4-D onto both organoclays is higher at pH.3 (232.58% for MMT1 and 161.29% for MMT2) compared to higher pH until pH.7 (49.75% for MMT1 and 68.49% for MMT2). Integrated structural characterisation studies confirmed the presence of 2,4-D on the layered organoclays. The Freundlich adsorption isotherm model fitted best to the experimental data, which revealed an energetically heterogeneous surface of the experimental organoclays, and adsorption which specifically involved chemisorption. The cumulative desorption percentages of adsorbed 2,4-D from MMT1_{(2,4-D loaded)} and MMT2_{(2,4-D loaded)} after seven desorption cycles were 65.53% and 51.45%, respectively. This outcome indicates: firstly, both organoclays are potential carrier materials for CRFs of 2,4-D; secondly, they have the ability to reduce the instantaneous release of 2,4-D immediately after application; and thirdly, eco-toxicity is greatly diminished.

Eco-Efficient Systems Based on Nanocarriers for the Controlled Release of Fertilizers and Pesticides: Toward Smart Agriculture

The excessive application of pesticides and fertilizers has generated losses in biological diversity, environmental pollution, and harmful effects on human health. Under this context, nanotechnology constitutes an innovative tool to alleviate these problems. Notably, applying nanocarriers as controlled release systems (CRSs) for agrochemicals can overcome the limitations of conventional products. A CRS for agrochemicals is an eco-friendly strategy for the ecosystem and human health. Nanopesticides based on synthetic and natural polymers, nanoemulsions, lipid nanoparticles, and nanofibers reduce phytopathogens and plant diseases. Nanoproducts designed with an environmentally responsive, controlled release offer great potential to create formulations that respond to specific environmental stimuli. The formulation of nanofertilizers is focused on enhancing the action of nutrients and growth stimulators, which show an improved nutrient release with site-specific action using nanohydroxyapatite, nanoclays, chitosan nanoparticles, mesoporous silica nanoparticles, and amorphous calcium phosphate. However, despite the noticeable results for nanopesticides and nanofertilizers, research still needs to be improved. Here, we review the relevant antecedents in this topic and discuss limitations and future challenges.

Delivery of Nematicides Using TMGMV-Derived Spherical Nanoparticles

Spherical nanoparticles (SNPs) from tobacco mild green mosaic virus (TMGMV) were developed and characterized, and their application for agrochemical delivery was demonstrated. Specifically, we set out to develop a platform for pesticide delivery targeting nematodes in the rhizosphere. SNPs were obtained by thermal shape-switching of the TMGMV. We demonstrated that cargo can be loaded into the SNPs during thermal shape-switching, enabling the one-pot synthesis of functionalized nanocarriers. Cyanine 5 and ivermectin were encapsulated into SNPs to achieve 10% mass loading. SNPs demonstrated good mobility and soil retention slightly higher than that of TMGMV rods. Ivermectin delivery to Caenorhabditis elegans using SNPs was determined after passing the formulations through soil. Using a gel burrowing assay, we demonstrate the potent efficacy of SNP-delivered ivermectin against nematodes. Like many pesticides, free ivermectin is adsorbed in the soil and did not show efficacy. The SNP nanotechnology offers good soil mobility and a platform technology for pesticide delivery to the rhizosphere.

A pectin-based photoactivated bactericide nanosystem for achieving an improved utilization rate, photostability and targeted delivery of hematoporphyrin

Photoactivated pesticides have many advantages, such as high activity, low toxicity, and no drug resistance. However, poor photostability and a low utilization rate limit their practical application. Herein, the photosensitizer hematoporphyrin (HP) was used as a photoactivated pesticide, covalently linked with pectin (PEC) via ester bonds, to prepare an amphiphilic polymer pro-bactericide, and subsequently self-assembled in aqueous solutions to obtain an esterase-triggered nanobactericide delivery system. The fluorescence quenching effect due to the aggregation of HP in nanoparticles (NPs) enabled the inhibition of photodegradation of HP in this system. Esterase stimulation could trigger HP release and increase its photodynamic activity. Antibacterial assays have shown that the NPs had potent antibacterial capacity, almost completely inactivating bacteria after 60 min of exposure to light. The NPs had good adherence to the leaves. Safety assessment indicated that the NPs have no obvious toxic effects on plants. Antibacterial studies on plants have shown that the NPs have excellent antibacterial effects on infected plants. These results provide a new strategy for obtaining a photoactivated bactericide nanosystem with a high utilization rate and good photostability and targeting ability.

A nano-delivery system expands the insecticidal target of thiamethoxam to include a devastating pest, the fall armyworm

Nano-delivery systems have been applied to deliver various synthetic/botanical pesticides to increase the efficiency of pesticide use and reduce the volumes of pesticides applied. Previous studies have supported the hypothesis that the nanocarriers can help expand the insecticidal target of pesticides to include non-target pests. However, the potential mechanism underlying this interesting phenomenon remains unclear. Herein, a widely applied star polycation (SPc) nanocarrier was synthesized to construct a thiamethoxam (TMX) nano-delivery system. The SPc-based delivery system could promote the translocation of exogenous substances across the membrane of Sf9 cells, increase the cytotoxicity of TMX against Sf9 cells by nearly 20%, and expand the insecticidal target of TMX to include Spodoptera frugiperda (the fall armyworm), with a 27.5% mortality increase at a concentration of 0.25 mg/mL. Moreover, the RNA-seq analysis demonstrated that the SPc could upregulate various transport-related genes, such as Rab, SORT1, CYTH, and PIKfyve, for the enhanced cellular uptake of TMX. Furthermore, enhanced cell death in larvae treated with the TMX-SPc complex was observed through changes in the expression levels of death-related genes, such as Casp7, BIRC5, MSK1, and PGAM5. The SPc-based nano-delivery system improved the cellular uptake of TMX and expanded its insecticidal target by adjusting the expression levels of death-related genes. The current study mainly identified the transport and cell death genes related to nanocarrier-based insecticidal target expansion, which is beneficial for understanding the bioactivity enhancement of the nano-delivery system.

Construction and formulation optimization of prothioconazole nanoemulsions for the control of Fusarium graminearum: Enhancing activity and reducing toxicity

In this study, the optimal emulsifier for prothioconazole nanoemulsions was initially screened based on appearance, microscopic observation, mean droplet size and polydispersity index (PDI). In addition, the BoxBehnken design method is adopted, and the optimal formula is screened with an emulsification time, emulsifier content, and solvent content as a single factor. On this basis, the nanoemulsion meets FAO standards for various indicators. The contact angle of droplets on wheat leaves was significantly reduced. This nanoemulsion also showed good inhibitory activity against Fusarium graminearum (EC₅₀ =1.94 mg L^-1), low acute toxicity to zebrafish (LC₅₀ =26.35 mg L^-1) and good biosafety to BEAS-2B cells. The nanoemulsion reduced the adverse effects of pesticide on wheat seed germination and growth. This study can help promote the design and manufacture of stable, efficient and safe agricultural nanoemulsions, and is expected to benefit the sustainable development of green plant protection.

Smart Protein-Based Fluorescent Nanoparticles Prepared by a Continuous Nanoprecipitation Method for Pesticides' Precise Delivery and Tracing

It is highly desirable to develop smart and green pesticide nanoformulations for improving pesticide targeting and reducing their inherent toxicity. Herein, we demonstrate a continuous nanoprecipitation method to construct a novel type of enzyme-responsive fluorescent nanopesticides (denoted as ABM@BSA-FITC/GA NPs) based on abamectin, fluorescein isothiocyanate isomer (FITC)-modified protein, and food-grade gum arabic. The as-prepared ABM@BSA-FITC/GA NPs exhibit good water dispersibility, excellent storage stability, and enhanced wettability compared to commercial formulations. The controlled release of pesticides can be achieved through protein degradation caused by trypsin. Most importantly, the deposition, distribution, and transport of the ABM@BSA-FITC/GA NPs are precisely tracked on target plants (cabbage and cucumber) by fluorescence. Furthermore, the ABM@BSA-FITC/GA NPs show the high control efficacy against Plutella xylostella L., which is comparable with commercial emulsifiable concentrate formulation. In consideration of its eco-friendly composition and absence of organic solvent, this pesticide nanoformulation has promising potential in sustainable plant protection.

Nanopesticides in comparison with agrochemicals: Outlook and future prospects for sustainable agriculture

Agrochemicals are products of advanced technologies that use inorganic pesticides and fertilizers. Widespread use of these compounds has adverse environmental effects, leading to acute and chronic exposure. Globally, scientists are adopting numerous green technologies to ensure a healthy and safe food supply and a livelihood for everyone. Nanotechnologies significantly impact all aspects of human activity, including agriculture, even if synthesizing certain nanomaterials is not environmentally friendly. Numerous nanomaterials may therefore make it easier to create natural insecticides, which are more effective and environmentally friendly. Nanoformulations can improve efficacy, reduce effective doses, and extend shelf life, while controlled-release products can improve the delivery of pesticides. Nanotechnology platforms enhance the bioavailability of conventional pesticides by changing kinetics, mechanisms, and pathways. This allows them to bypass biological and other undesirable resistance mechanisms, increasing their efficacy. The development of nanomaterials is expected to lead to a new generation of pesticides that are more effective and safer for life, humans, and the environment. This article aims to express at how nanopesticides are being used in crop protection now and in the future. This review aims to shed some light on the various impacts of agrochemicals, their benefits, and the function of nanopesticide formulations in agriculture.

Insecticidal efficacy of nanoparticles against Spodoptera frugiperda (J.E. Smith) larvae and their impact in the soil

The present study aims to evaluate the different nanoparticles (Cu NPs, KI NPs, Ag NPs, Bd NPs, and Gv NPs) against 4th instar Spodoptera frugiperda larvae as well as the microbial toxicity, phytotoxicity, and soil pH. Nanoparticles were tested at three concentrations (1000, 10000, and 100000 ppm) using two methods (food dip and larvae dip) against S. frugiperda larvae. Results (from the larval dip method) showed that among the nanoparticles, the KI NPs caused 63%, 98%, and 98% mortality within 5 days in the treatment of 1000, 10000, and 100000 ppm, respectively. After 24 h post treatment, a 1000 ppm concentration showed 95%, 54%, and 94% germination rates in Metarhizium anisopliae, Beauveria bassiana, and Trichoderma harzianum, respectively. The phytotoxicity evaluation clearly showed that NPs did not affect the morphology of the corn plants after the treatment. The soil nutrient analysis results showed that no effect was observed in soil pH or soil nutrients compared to control treatments. The study clearly showed that nanoparticles are caused toxic effect against S. frugiperda larvae.

Natural and Synthetic Clay Minerals in the Pharmaceutical and Biomedical Fields

Clay minerals are historically among the most used materials with a wide variety of applications. In pharmaceutical and biomedical fields, their healing properties have always been known and used in pelotherapy and therefore attractive for their potential. In recent decades, the research has therefore focused on the systematic investigation of these properties. This review aims to describe the most relevant and recent uses of clays in the pharmaceutical and biomedical field, especially for drug delivery and tissue engineering purposes. Clay minerals, which are biocompatible and non-toxic materials, can act as carriers for active ingredients while controlling their release and increasing their bioavailability. Moreover, the combination of clays and polymers is useful as it can improve the mechanical and thermal properties of polymers, as well as induce cell adhesion and proliferation. Different types of clays, both of natural (such as montmorillonite and halloysite) and synthetic origin (layered double hydroxides and zeolites), were considered in order to compare them and to assess their advantages and different uses.

Are encapsulated pesticides less harmful to human health than their conventional alternatives? Protocol for a systematic review of in vitro and in vivo animal model studies

BACKGROUND

The gradual increase in the global population has led to the rising demand for agricultural products worldwide. This required the introduction of environment- and public health-friendly advanced technologies for plant protection to guard yields from pest destruction in a sustainable way. Encapsulation technology is a promising procedure to increase the effectiveness of pesticide active ingredients while reducing human exposure and environmental impact. Despite the presumed favorable properties of encapsulated pesticide formulations on human health, it is necessary to systematically assess whether they are less harmful to human health than conventional pesticide products.

OBJECTIVES

We aim to systematically review the literature to answer the question of whether micro- or nano-encapsulated pesticide formulations exert different degrees of toxicity than their conventional (not-encapsulated) counterparts in in vivo animal and in vitro (human, animal, and bacterial cell) non-target models. The answer is important to estimate the possible differences in the toxicological hazards of the two different types of pesticide formulations. Because our extracted data will come from different models, we also aim to perform subgroup analyses to investigate how toxicity varies across different models. A pooled toxicity effect estimate will also be performed by meta-analysis when appropriate.

METHODS

The systematic review will follow the guidelines developed by the National Toxicology Program's Office of Health Assessment and Translation (NTP/OHAT). The protocol adheres to the Preferred Reporting Items for Systematic Reviews and meta-analyses Protocol (PRISMA-P) statement. PubMed (NLM), Scopus (Elsevier), Web of Science Core Collection (Clarivate), Embase (Elsevier), and Agricola (EBSCOhost) electronic databases will be comprehensively searched in September 2022 to identify eligible studies using multiple search terms of "pesticide", "encapsulation" and "toxicity" along with their synonyms and other words that are semantically related. The reference lists of all eligible articles and retrieved reviews will be manually screened to identify additional relevant papers.

ELIGIBILITY CRITERIA

We will include peer-reviewed experimental (non-target in vivo animal model and in vitro human, animal, and bacterial cell cultures) studies published as full-text articles in English language that simultaneously investigate the effect of any micro- or nano-encapsulated pesticide formulation, applied in all ranges of concentrations, duration, and routes of exposure, and its corresponding active ingredient(s) or its conventional non-encapsulated product formulation(s) used in the same ranges of concentrations, duration, and routes of exposure on the same pathophysiological outcome. We will exclude studies that examine pesticidal activity on target organisms, cultures of cells isolated from target organisms exposed in vivo or in vitro, and those using biological materials isolated from target organisms/cells.

STUDY APPRAISAL AND SYNTHESIS

Studies identified by the search will be screened and managed according to the review inclusion and exclusion criteria in the Covidence systematic review tool by two reviewers, who will also blindly extract the data and assess the risk of bias of included studies. The OHAT risk of bias tool will be applied to evaluate the quality and risk of bias in the included studies. Study findings will be synthesized narratively by important features of the study populations, design, exposure, and endpoints. If findings make it possible, a meta-analysis will be performed on identified toxicity outcomes. To rate the certainty in the body of evidence, we will use the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach.

Self-assembled thiophanate-methyl/star polycation complex prevents plant cell-wall penetration and fungal carbon utilization during cotton infection by Verticillium dahliae

No effective fungicides are available for the management of Verticillium dahliae, which causes vascular wilt disease. In this study, a star polycation (SPc)-based nanodelivery system was used for the first time to develop a thiophanate-methyl (TM) nanoagent for the management of V. dahliae. SPc spontaneously assembled with TM through hydrogen bonding and Van der Waals forces to decrease the particle size of TM from 834 to 86 nm. Compared to TM alone, the SPc-loaded TM further reduced the colony diameter of V. dahliae to 1.12 and 0.64 cm, and the spore number to 1.13 × 10⁸ and 0.72 × 10⁸ cfu/mL at the concentrations of 3.77 and 4.71 mg/L, respectively. The TM nanoagents disturbed the expression of various crucial genes in V. dahliae, and contributed to preventing plant cell-wall degradation and carbon utilization by V. dahliae, which mainly impaired the infective interaction between pathogens and plants. TM nanoagents remarkably decreased the plant disease index and the fungal biomass in the root compared to TM alone, and its control efficacy was the best (61.20 %) among the various formulations tested in the field. Furthermore, SPc showed negligible acute toxicity toward cotton seeds. To the best of our knowledge, this study is the first to design a self-assembled nanofungicide that efficiently inhibits V. dahliae growth and protects cotton from the destructive Verticillium wilt.