Vitamin E Encapsulation within Oil-in-Water Emulsions: Impact of Emulsifier Type on Physicochemical Stability and Bioaccessibility

In vitro digestive behavior of emulsifier-stabilized excipient emulsions affects the bioaccessibility of flavonoids

BACKGROUND

Flavonoids, found in common vegetables and fruits, have health benefits that are often limited by their low bioavailability. Excipient emulsions provide an effective strategy to overcome these obstacles. However, the nature of the emulsifier used to formulate excipient emulsions and the chemical structure of the flavonoids both affect the bioaccessibility of the flavonoids.

RESULTS

The purpose of this study was to investigate the impact of the interfacial properties of excipient emulsions on the in vitro gastrointestinal fate of representative structural flavonoids (quercetin, kaempferol, and apigenin) through the INFOGEST method. Tween 80 (TW80) (a nonionic surfactant) was more effective at reducing the oil-water interfacial tension than whey protein isolate (WPI) (a protein-based emulsifier) or octenyl succinic anhydride (OSA)-modified starch (MS) (a polysaccharide-based emulsifier). Moreover, TW80 created excipient emulsions with smaller oil droplets, which were more resistant to oral and gastric conditions. The WPI-emulsions underwent severe flocculation in the gastric phase, leading to an appreciable increase in particle size (from 220 to 3000 nm). The TW80-coated oil droplets were more digestible than WPI- or MS-coated ones. This was attributed to the larger lipid surface area for lipase attachment. The bioaccessibility of quercetin, kaempferol, and apigenin was also affected by emulsifiers: TW 80 (25% to 45%) > WPI (14% to 29%) ≈ MS (15% to 25%). Flavonoid bioaccessibility appeared to be related to their molecular properties.

CONCLUSION

This study provides guidance for the design of effective excipient emulsions to enhance the bioavailability of flavonoids. © 2024 Society of Chemical Industry.

Combination of legume proteins and arabinoxylans are efficient emulsifiers to promote vitamin E bioaccessibility during digestion

The emulsification potential of plant-based emulsifiers, that is, pea (PPI) and lentil (LPI) proteins (4%), corn arabinoxylans (CAX, 1%), and legume protein-arabinoxylan mixtures (4% proteins + 0.15 or 0.9% CAX), was evaluated by assessing: the surface tension and potential of emulsifiers, emulsifier antinutritional contents, emulsion droplet size, emulsion physical stability, and vitamin E bioaccessibility from 10% oil-in-water emulsions. Tween 80 (2%) was used as a control. All emulsions presented small droplet sizes, both fresh and upon storage, except 4% LPI + 0.9% CAX emulsion that exhibited bigger droplet sizes (d(4,3) of approximately 18.76 μm vs 0.59 μm for the control) because of droplet bridging. Vitamin E bioaccessibility from emulsions stabilized with the combination of 4% PPI and either 0.15% or 0.9% CAX (28 ± 4.48% and 28.42 ± 3.87%, respectively) was not significantly different from that of emulsions stabilized with Tween 80 (43.56 ± 3.71%), whereas vitamin E bioaccessibility from emulsions stabilized with individual emulsifiers was significantly lower.

Emulsions vs excipient emulsions as α-tocopherol delivery systems: Formulation optimization and behaviour under in vitro digestion

Oil-in-water emulsions (EM) have been extensively used for the encapsulation of lipophilic bioactive compounds and posterior incorporation into food matrices to obtain functional foods. Conversely, novel excipient oil-in-water emulsions (EXC) present identical composition and structure as EM, albeit are not bioactive by themselves since no bioactive compound is encapsulated. Instead, EXC aims at improving the bioavailability of foods' natural bioactive compounds upon co-ingestion with nutrient-rich foods. In this work, EM and EXC were produced and their stability and functionality as delivery systems for α-tocopherol compared. Emulsions were formulated with corn oil and lecithin, and their composition was optimized using experimental designs. Formulations produced with 3 % lecithin and 5 % oil attained smallest particles sizes with the lowest polydispersity index of all tested formulations and remained stable up to 60 days. Encapsulation of α-tocopherol did not have a significative impact on the structural properties of the particles produced with the same composition. α-tocopherol stability during in vitro digestion was superior in EM regardless the processing methodology (EM stability < 50 %, EXC stability < 29 %), indicating that EM offered greater protection against the digestive environment. α-tocopherol's bioaccessibility was significantly increased when encapsulated or when digested with added excipient emulsions (82-92 % and 87-90 % for EM and EXC, respectively). In conclusion, EM were more efficient vehicles for the selected bioactive compound, however, the good results obtained with EXC imply that excipient emulsions have a great potential for applications on foods to improve their natural bioactive compounds' bioavailability without the need of further processing.

Impact of saliva incorporation on the rheological properties of in vitro gastric contents formulated from sour cream

Rheological properties of gastric contents depend on the food ingested, and on the volume and composition of secretions from the host, which may vary. This study investigates the impact of saliva regular incorporation in the stomach after a meal on the rheological properties of gastric contents, considering two levels of salivary flow (low = 0.5 and high = 1.5 mL/min). In vitro chymes were obtained by mixing sour cream, simulated gastric fluid, two different volumes of oral fluid (at-rest human saliva, SSF for Simulated Salivary Fluid or water) and adjusting pH at 3. Chymes samples were characterized at 37°C for their particle size and rheological properties. Overall, particle size distribution was not different between samples: incorporating a larger volume of saliva resulted in more heterogeneity, but the surface area moment D[3,2] and volume moment D[4,3] did not differ significantly with the oral fluid type. Shear viscosity of chyme samples was higher when saliva was incorporated, in comparison with water or SSF. In addition, as shown from data extracted atγ ̇ $$ \dot{\gamma} $$  = 20 s-1 the higher the fluid volume the lower the shear viscosity, which is attributed to a dilution effect. However, this dilution effect was attenuated in the case of saliva, most likely due to its composition in organic compounds (e.g., mucins) contributing to the rheological properties of this biological fluid. In these in vitro conditions, both saliva and the salivation rate had a significant but slight impact on the rheological properties of gastric contents (of the order of 1-5 mPa s atγ ̇ $$ \dot{\gamma} $$  = 20 s-1).

Improved physicochemical stability of fish oil nanoemulsion via a dense interfacial layer formed by hyaluronic acid-poly(glyceryl)10-stearate

This study aimed to synthesize a novel emulsifier, hyaluronic acid-poly(glyceryl)10-stearate (HA-PG10-C18), and employ it for the fabrication of nanoemulsions incorporating deep-sea fish oil to improve their apparent solubility and physicochemical stability. 1H NMR and FT-IR analyses indicated successful synthesis of HA-PG10-C18. Nanoemulsions of deep-sea fish oil loaded with HA-PG10-C18 (HA-PG10-C18@NE) were successfully fabricated by ultrasonic emulsification. The fixed aqueous layer thickness (FALT) of PG10-C18@NE and HA-PG10-C18@NE was determined and the FALT of both nanoemulsions was similar, while the surface density of HA-PG10-C18@NE (4.92 × 10-12 ng/nm2) is 60 % higher than that of PG10-C18@NE (3.07 × 10-12 ng/nm2). Notably, HA-PG10-C18@NE demonstrated an exceptional physicochemical stability when exposed to various stressed environmental conditions, especially its freeze-thaw stability. Moreover, after simulated in vitro digestion, the HA-PG10-C18@NE exhibited a comparatively greater liberation of free fatty acids (94.0 ± 1.7 %) when compared to the release observed in PG10-C18@NE (85.5 ± 2.2 %).

Characterization of modified starch-based complexes-stabilized linolenic acid emulsions and their enhanced oxidative stability in vitro gastrointestinal digestion

A new approach of fabricating α-linolenic acid emulsions with enhanced oxidative stability in vitro digestion was established, using covalent octenyl succinic anhydride starch (OSAS)-soy protein (SP)-epigallocatechin-3-gallate (EGCG) complexes as emulsifiers. The physicochemical characteristics and surface morphology of emulsions were mainly characterized by rheological measurements, laser scanning microscope (CLSM) and cryo-scanning electron microscopy (Cryo-SEM). Results indicated that emulsions had dense interfacial layers and strong network structures. As a result, the stability and antioxidant ability of emulsions were improved significantly. In addition, the oxidative stability of emulsions in vitro gastrointestinal digestion was explored. Results showed that emulsions could maintain better oxidative stability owing to antioxidant activity of covalent OSAS-SP-EGCG complexes under gastrointestinal conditions. In particular, lipid hydroperoxide and malondialdehyde contents of emulsions prepared by 1:4 complexes were lower than 0.35 mmol/L and 20.5 nmol/mL, respectively, approximately half those of emulsions stabilized by OSAS (0.65 mmol/L and 39.5 nmol/mL). It was indicated that covalent OSAS-SP-EGCG complexes could effectively inhibit α-linolenic acid oxidation in emulsions during vitro gastrointestinal digestion. This work will provide a theoretical basis for the development of α-linolenic acid emulsions, which will help to broaden application of α-linolenic acid in food industry.

Development of "Smart Foods" for health by nanoencapsulation: Novel technologies and challenges

Importance of nanotechnology may be seen by penetration of its application in diverse areas including the food sector. With investigations and advancements in nanotechnology, based on feedback from these diverse areas, ease, and efficacy are also increasing. The food sector may use nanotechnology to encapsulate smart foods for increased health, wellness, illness prevention, and effective targeted delivery. Such nanoencapsulated targeted delivery systems may further add to the economic and nutritional properties of smart foods like stability, solubility, effectiveness, safeguard against disintegration, permeability, and bioavailability of smart/bioactive substances. But in the way of application, the fabrication of nanomaterials/nanostructures has several challenges which range from figuring out the optimal technique for obtaining them to determining the most suitable form of nanostructure for a bioactive molecule of interest. This review precisely addresses concepts, recent advances in fabrication techniques as well as current challenges/glitches of nanoencapsulation with special reference to smart foods/bioactive components. Since dealing with food materials also raises the quest for safety and regulatory norms a brief overview of the safety and regulatory aspects of nanomaterials/nanoencapsulation is also presented.

Assessing the nutritional quality of lipid components in commercial meal replacement shakes using an in vitro digestion model

This study aimed to investigate the nutritional value of five commercial meal-replacement shakes, and mainly focused on the lipid digestion fates and fat-soluble vitamin bioavailability. Four out of five samples exhibited a low lipolysis level (37.33-61.42%), aligning with the intended objectives of these products. Although the remaining sample rich in diacylglycerol (DAG) had a higher lipolysis level (80.83%), the inherent low-calorie nature of DAG might compensate for this drawback. The release level of individual fatty acid was largely determined by the glycerolipid composition. Moreover, the strong positive correlation between lipid hydrolyzed products amounts and the fat-soluble vitamin bioavailability was observed. Surprisingly, one out of five samples can provide enough vitamin A and vitamin E for consumers as a total replacement of one or two regular meals. Consequently, the meal-replacement shakes hold the potential to emerge as healthy products for this fast-paced era if the composition and structure were carefully designed and calculated.

Bioaccessibility and bioactive potential of different phytochemical classes from nutraceuticals and functional foods

Nutraceuticals and functional foods are composed of especially complex matrices, with polyphenols, carotenoids, minerals, and vitamins, among others, being the main classes of phytochemicals involved in their bioactivities. Despite their wide use, further investigations are needed to certify the proper release of these phytochemicals into the gastrointestinal medium, where the bioaccessibility assay is one of the most frequently used method. The aim of this review was to gather and describe different methods that can be used to assess the bioaccessibility of nutraceuticals and functional foods, along with the most important factors that can impact this process. The link between simulated digestion testing of phytochemicals and their in vitro bioactivity is also discussed, with a special focus on the potential of developing nutraceuticals and functional foods from simple plant materials. The bioactive potential of certain classes of phytochemicals from nutraceuticals and functional foods is susceptible to different variations during the bioaccessibility assessment, with different factors contributing to this variability, namely the chemical composition and the nature of the matrix. Regardless of the high number of studies, the current methodology fails to assume correlations between bioaccessibility and bioactivity, and the findings of this review indicate a necessity for updated and standardized protocols.

Influence of Proteins on Bioaccessibility of α-Tocopherol Encapsulation within High Diacylglycerol-Based Emulsions

α-Tocopherol has been widely used in medicine, cosmetics, and food industry as a nutritional supplement and antioxidant. However, α-tocopherol showed low bioaccessibility, and there is a widespread α-tocopherol deficiency in society today. The preparation of oil-in-water emulsions with high safety and low-calorie property is necessary. The aim of this research was to investigate the effects of different protein emulsifiers (whey protein isolate (WPI), soy protein isolate (SPI), and sodium casein (SC)) on the properties of emulsions delivery system, and diacylglycerol (DAG) was picked as a low-accumulated lipid. The interfacial changes, microstructural alterations, and possible interactions of the protein-stabilized DAG emulsions were investigated during the in vitro digestion. The results show that different proteins affect the degree of digestibility and α-tocopherol bioaccessibility of the emulsions. Both WPI- and SPI-coated emulsions showed good digestibility and α-tocopherol bioaccessibility (77.64 ± 2.93%). This might be due to the strong hydrolysis resistance of WPI (β-lactoglobulin) and the good emulsification ability of SPI. The SC-coated emulsion showed the lowest digestibility and α-tocopherol bioaccessibility, this might be due to the emulsification property of hydrolysis products of SC and the potential interaction with calcium ions. This study provides new possibilities for the application of DAG emulsions in delivery systems.

Physicochemical and In Vitro Digestion Properties of Curcumin-Loaded Solid Lipid Nanoparticles with Different Solid Lipids and Emulsifiers

Curcumin-loaded solid lipid nanoparticles (Cur-SLN) were prepared using medium- and long chain diacylglycerol (MLCD) or glycerol tripalmitate (TP) as lipid matrix and three kinds of surfactants including Tween 20 (T20), quillaja saponin (SQ) and rhamnolipid (Rha). The MLCD-based SLNs had a smaller size and lower surface charge than TP-SLNs with a Cur encapsulation efficiency of 87.54-95.32% and the Rha-based SLNs exhibited a small size but low stability to pH decreases and ionic strength. Thermal analysis and X-ray diffraction results confirmed that the SLNs with different lipid cores showed varying structures, melting and crystallization profiles. The emulsifiers slightly impacted the crystal polymorphism of MLCD-SLNs but largely influenced that of TP-SLNs. Meanwhile, the polymorphism transition was less significant for MLCD-SLNs, which accounted for the better stabilization of particle size and higher encapsulation efficiency of MLCD-SLNs during storage. In vitro studies showed that emulsifier formulation greatly impacted on the Cur bioavailability, whereby T20-SLNs showed much higher digestibility and bioavailability than that of SQ- and Rha-SLNs possibly due to the difference in the interfacial composition. Mathematical modeling analysis of the membrane release further confirmed that Cur was mainly released from the intestinal phase and T20-SLNs showed a faster release rate compared with other formulations. This work contributes to a better understanding of the performance of MLCD in lipophilic compound-loaded SLNs and has important implications for the rational design of lipid nanocarriers and in instructing their application in functional food products.

Emulsion-Based Delivery Systems to Enhance the Functionality of Bioactive Compounds: Towards the Use of Ingredients from Natural, Sustainable Sources

In recent years, the trend in the population towards consuming more natural and sustainable foods has increased significantly. This claim has led to the search for new sources of bioactive compounds and extraction methods that have less impact on the environment. Moreover, the formulation of systems to protect these compounds is also focusing on the use of ingredients of natural origin. This article reviews novel, natural alternative sources of bioactive compounds with a positive impact on sustainability. In addition, it also contains information on the most recent studies based on the use of natural (especially from plants) emulsifiers in the design of emulsion-based delivery systems to protect bioactive compounds. The properties of these natural-based emulsion-delivery systems, as well as their functionality, including in vitro and in vivo studies, are also discussed. This review provides relevant information on the latest advances in the development of emulsion delivery systems based on ingredients from sustainable natural sources.

Effect of the Emulsifier Used in Dunaliella salina-Based Nanoemulsions Formulation on the β-Carotene Absorption and Metabolism in Rats

SCOPE

Microalgae such as Dunaliella salina are a potential sustainable source of natural β-carotene due to their fast growth and high adaptability to environmental conditions. This work aims to evaluate the effect of the incorporation of β-carotene from this alga into different emulsifier-type nanoemulsions (soybean lecithin [SBL], whey protein isolate [WPI], sodium caseinate [SDC]) on its absorption, metabolization, and biodistribution in rats.

METHODS AND RESULTS

Nanoemulsions formulated with different emulsifiers at 8% concentration are obtained by five cycles of microfluidization at 130 mPa, then expose to an in vitro digestion or orally administer to rats. Feeding rats with nanoemulsions improves β-carotene uptake compared to control suspension, especially using SDC and WPI as emulsifiers. A greater presence of β-carotene and retinol in the intestine, plasma, and liver is observed, being the liver the tissue that shows the highest accumulation. This fact can be a consequence of the smaller droplets that protein-nanoemulsions present compared to that with SBL in the intestine of rats, which promote faster digestibility and higher β-carotene bioaccessibility (35%-50% more) according to the in vitro observations.

CONCLUSIONS

Nanoemulsions, especially those formulated with protein emulsifiers, are effective systems for increasing β-carotene absorption, as well as retinol concentration in different rat tissues.

Enhancing in vivo retinol bioavailability by incorporating β-carotene from alga Dunaliella salina into nanoemulsions containing natural-based emulsifiers

The use of microalgae as a source of bioactive compounds has gained interest since they present advantages vs higher plants. Among them, Dunaliella salina is one of the best sources of natural β-carotene, which is the precursor of vitamin A. However, β-carotene shows reduced oral bioavailability due to its chemical degradation and poor absorption. The work aimed to evaluate the influence of the emulsifier and oil concentration on the digestive stability of Dunaliella Salina-based nanoemulsions and study their influence on the digestibility and the β-carotene bioaccessibility. In addition, the effect of the emulsifier nature on the absorption of β-carotene and its conversion to retinol in vivo was also investigated. Results showed that the coalescence observed in soybean lecithin nanoemulsion during the gastrointestinal digestion reduced the digestibility and β-carotene bioaccessibility. In contrast, whey protein nanoemulsion that showed aggregation in the gastric phase could be redispersed in the intestinal phase facilitating the digestibility and bioaccessibility of the compound. In vivo results confirmed that whey protein nanoemulsion increased the bioavailability of retinol to a higher extent (C_max 685 ng/mL) than soybean lecithin nanoemulsion (C_max 394 ng/mL), because of an enhanced β-carotene absorption.

Preparation of Fucoxanthin Nanoemulsion Stabilized by Natural Emulsifiers: Fucoidan, Sodium Caseinate, and Gum Arabic

This study was proposed to investigate the possibility of O/W nanoemulsion stabilization via natural emulsifiers as a delivery system for fucoxanthin. Nanoemulsions were prepared using ultrasonic treatment (150 W, amplitude 80%, 10 min) with different levels (0.5%, 1%, and 2% wt) of fucoidan, gum Arabic, and sodium caseinate as natural emulsifires and they were compared with tween 80. Then, the creaming index, stability, encapsulation efficacy, Fourier-transform infrared (FT-IR) spectroscopy, and in vitro release were evaluated. The best stability and lowest creaming index were observed at 2% wt of emulsifiers. Nanoemulsions with droplet sizes (113.27−127.50 nm) and zeta potentials (−32.27 to −58.87 mV) were prepared. The droplet size of nanoemulsions was reduced by increasing the emulsifier concentration, and the best nanoemulsion stability after 15 days of storage was in the following order: tween 80 > sodium caseinate > fucoidan > gum Arabic. The encapsulation efficacy of nanoemulsions stabilized by sodium caseinate, fucoidan, and gum Arabic were 88.51 ± 0.11%, 79.32 ± 0.09%, and 60.34 ± 0.13%, respectively. The in vitro gastrointestinal fucoxanthin release of nanoemulsion stabilized with tween 80, sodium caseinate, fucoidan, and gum Arabic were 85.14 ± 0.16%, 76.91 ± 0.34%, 71.41 ± 0.14%, and 68.98 ± 0.36%, respectively. The release of fucoxanthin from nanoemulsions followed Fickian diffusion. The FTIR also confirmed the encapsulation of fucoxanthin.

Advances in Nanofabrication Technology for Nutraceuticals: New Insights and Future Trends

Bioactive components such as polyphenolics, flavonoids, bioactive peptides, pigments, and essential fatty acids were known to ward off some deadliest diseases. Nutraceuticals are those beneficial compounds that may be food or part of food that has come up with medical or health benefits. Nanoencapsulation and nanofabricated delivery systems are an imminent approach in the field of food sciences. The sustainable fabrication of nutraceuticals and biocompatible active components indisputably enhances the food grade and promotes good health. Nanofabricated delivery systems include carbohydrates-based, lipids (solid and liquid), and proteins-based delivery systems. Solid nano-delivery systems include lipid nanoparticles. Liquid nano-delivery systems include nanoliposomes and nanoemulsions. Physicochemical properties of nanoparticles such as size, charge, hydrophobicity, and targeting molecules affect the absorption, distribution, metabolism, and excretion of nano delivery systems. Advance research in toxicity studies is necessary to ensure the safety of the nanofabricated delivery systems, as the safety of nano delivery systems for use in food applications is unknown. Therefore, improved nanotechnology could play a pivotal role in developing functional foods, a contemporary concept assuring the consumers to provide programmed, high-priced, and high-quality research toward nanofabricated delivery systems.

A review of recent progress in improving the bioavailability of nutraceutical-loaded emulsions after oral intake

Increasing awareness of the health benefits of specific constituents in fruits, vegetables, cereals, and other whole foods has sparked a broader interest in the potential health benefits of nutraceuticals. Many nutraceuticals are hydrophobic substances, which means they must be encapsulated in colloidal delivery systems. Oil-in-water emulsions are one of the most widely used delivery systems for improving the bioavailability and bioactivity of these nutraceuticals. The composition and structure of emulsions can be designed to improve the water dispersibility, physicochemical stability, and bioavailability of the encapsulated nutraceuticals. The nature of the emulsion used influences the interfacial area and properties of the nutraceutical-loaded oil droplets in the gastrointestinal tract, which influences their digestion, as well as the bioaccessibility, metabolism, and absorption of the nutraceuticals. In this article, we review recent in vitro and in vivo studies on the utilization of emulsions to improve the bioavailability of nutraceuticals. The findings from this review should facilitate the design of more efficacious nutraceutical-loaded emulsions with increased bioactivity.

Effects of antioxidant types on the stabilization and in vitro digestion behaviors of silver carp scale gelatin-stabilized fish oil-loaded emulsions

Lipid oxidation is a major challenge in the development and storage of lipid-containing food products. In this work, we extracted aquatic gelatin from silver carp scales and studied the effects of antioxidant types (water-soluble and lipid-soluble types) on the stabilization, lipid oxidation, and in vitro digestion behaviors of silver carp scale gelatin-stabilized fish oil-loaded emulsions. Vitamin C (VC), a water-soluble antioxidant, and vitamin E (VE), a lipid-soluble antioxidant, had no obvious effects on the appearance, droplet size distribution, and droplet stability of the emulsion. VC slowed the liquid-gel transition of the emulsions at room temperature. The emulsion creaming stability decreased with the increase of VC concentration, whereas it increased with the increase of VE concentration. Lipid oxidation hierarchy of emulsion groups at room temperature were VC<VE<control<pure oil. Free fatty acids were mainly released from the silver carp scale gelatin-stabilized emulsions in the simulated intestinal fluid. Moreover, compared with the control group, VC increased the free fatty acid release percentages, whereas VE decreased them. This work provided useful information for developing antioxidants in the field of food science and in value-added utilization research of aquatic by-products.

Saponins as Natural Emulsifiers for Nanoemulsions

The awareness of sustainability approaches has focused attention on replacing synthetic emulsifiers with natural alternatives when formulating nanoemulsions. In this context, a comprehensive review of the different types of saponins being successfully used to form and stabilize nanoemulsions is presented, highlighting the most common natural sources and biosynthetic routes. Processes for their extraction and purification are also reviewed altogether with the recent advances for their characterization. Concerning the preparation of the nanoemulsions containing saponins, the focus has been initially given to screening methods, lipid phase used, and production procedures, but their characterization and delivery systems explored are also discussed. Most experimental outcomes showed that the saponins present high performance, but the challenges associated with the saponins' broader application, mainly the standardization for industrial use, are identified. Future perspectives report, among others, the emerging biotechnological processes and the use of byproducts in a circular economy context.

Influence of Proteins on the Absorption of Lipophilic Vitamins, Carotenoids and Curcumin - A Review

While proteins have been widely used to encapsulate, protect, and regulate the release of bioactive food compounds, little is known about the influence of co-consumed proteins on the absorption of lipophilic constituents following digestion, such as vitamins (A, D, E, K), carotenoids, and curcumin. Their bioavailability is often low and very variable, depending on the food matrix and host factors. Some proteins can act as emulsifiers during digestion. Their liberated peptides have amphiphilic properties that can facilitate the absorption of microconstituents, by improving their transition from lipid droplets into mixed micelles. Contrarily, the less well digested proteins could negatively impinge on enzymatic accessibility to the lipid droplets, slowing down their processing into mixed micelles and entrapping apolar food compounds. Interactions with mixed micelles and proteins are also plausible, as shown earlier for drugs. This review focuses on the ability of proteins to act as effective emulsifiers of lipophilic vitamins, carotenoids, and curcumin during digestion. The functional properties of proteins, their chemical interactions with enzymes and food constituents during gastro-intestinal digestion, potentials and limitations for their use as emulsifiers are emphasized and data from human, animal, and in vitro trials are summarized.

Ovalbumin/carboxymethylcellulose colloids: Particle compactness and interfacial stability

A protein/polysaccharide colloidal particle was prepared via combined complex coacervation and heat-induction. When the ratio of ovalbumin (OVA) to carboxymethylcellulose (CMC) was at 1:2, loose flexible particles (low D_f) with low surface hydrophobicity were obtained. Conversely, dense and compact particles (high D_f) were easily formed at a higher OVA/CMC ratio. Only in the appropriate OVA/CMC ratio, pH will have a greater impact on the colloidal particles. At the pH value of 4.4, the OVA/CMC ratio had a greater impact on the colloidal particles compared to pH. The emulsion stabilized by loose particles had a mean particle size of 3888 nm and was easily flocculated and creamed. On the other hand, compact particles formed a stable emulsion, which had a higher exponent of Δr² (0.867) and could resist flocculation during the 7 days storage. As such, the results showed that stable emulsion could be realized by utilizing compact particles as emulsifiers.

Comparison of Lutein Bioaccessibility from Dietary Supplement-Excipient Nanoemulsions and Nanoemulsion-Based Delivery Systems

The impact of lutein-loaded nanoemulsions and excipient nanoemulsions mixed with lutein-based dietary supplements (capsules and soft gels) on the bioaccessibility of lutein was explored using a simulated gastrointestinal tract (GIT). The particle size, particle size distribution, ζ-potential, microstructure, lipid digestibility, and lutein bioaccessibility of all the samples were measured after they were exposed to different environments (stomach and small intestine environments) within a simulated GIT. As expected, the bioaccessibility of lutein from the capsules (1.5%) and soft gels (3.2%) was relatively low when they were administered alone. However, the co-administration of excipient nanoemulsions significantly increased the bioaccessibility of lutein from both the capsules (35.2%) and soft gels (28.7%). This phenomenon was attributed to the fast digestion of the small oil droplets in the excipient nanoemulsions and the further formation of mixed micelles to solubilize any lutein molecules released from the supplements. The lutein-loaded nanoemulsions exhibited a much higher lutein bioaccessibility (86.8%) than any of the supplements, which was attributed to the rapid release and solubilization of lutein when the lipid droplets were rapidly and extensively digested within the small intestine. This study indicates that the bioaccessibility of lutein is much higher in nanoemulsion droplets than that in dietary supplements. However, consuming dietary supplements in the presence of nanoemulsion droplets can greatly increase lutein bioavailability. The results of this study have important guiding significance for the design of more effective lutein supplements.

Fabrication and characterization of β-carotene emulsions stabilized by soy oleosin and lecithin mixtures with a composition mimicking natural soy oleosomes

Natural soy oleosomes are known to have a remarkable stability, given the advantage of their sophisticated membrane. The aim of the present study is to examine the concept of fabricating a β-carotene emulsion stabilized by soy oleosin (OLE) and lecithin (LEC) mixtures mimicking the membrane composition of soy oleosomes while providing preferable stability and bioaccessibility. For this, the fabricated emulsion was characterized in terms of droplet size distribution, and emulsion structure, stability and digestion (release and absorption of lipophilic β-carotene). Compared to SPI/LEC (10 : 1) stabilized emulsions, the OLE/LEC (10 : 1) mixture stabilized emulsion exhibited the highest emulsifying activity index (EAI) and emulsifying stability index (ESI) values, and higher encapsulation efficiency. Results show that the β-carotene emulsion stabilized by OLE and LEC mixtures at the ratio of 10 : 1 (w/w) has the most uniform droplet distribution and highest stability. The in vitro gastrointestinal digestion test revealed that the β-carotene emulsion stabilized by OLE and LEC mixtures was digested more rapidly than the emulsion stabilized by soy protein isolate (SPI) and LEC mixtures. In turn, the bioaccessibility and cellular uptake of β-carotene were enhanced, resulting in a higher absorption, a desirable feature of nutrition delivery systems. Our results demonstrated a promising way to fabricate emulsions mimicking natural soy oleosomes.

Development of curcumin-loaded Prunus armeniaca gum nanoparticles: Synthesis, characterization, control release behavior, and evaluation of anticancer and antimicrobial properties

The present work was conducted to develop a new polysaccharide-based encapsulation system via electrostatic interactions between Prunus armeniaca gum exudates (PAGE) and Ca2+ ions to enhance the biological activity and bioavailability of curcumin. The effects of different levels of pH (6, 7, and 8) and ion concentrations (1, 3, and 5) on the particle diameter and surface charge of the samples were examined. The encapsulation efficiency in the PAGE-based nanoparticles was realized to be 86.1%, indicating the encapsulation technique applied in this study was effective to entrap most of the curcumin within the PAGE matrix. The nanoparticles showed a smooth surface with spherical shape. Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (X-ray) studies confirmed the formation of polyelectrolyte complexation. The cumulative release of curcumin in simulated gastrointestinal tract was less than 75%, revealing a gradual release trend. Both pure curcumin and curcumin-loaded nanoparticles were toxic to the cancer cell lines.

Anti-aging properties of phytoconstituents and phyto-nanoemulsions and their application in managing aging-related diseases

Aging is spontaneous and inevitable process in all living beings. It is a complex natural phenomenon that manifests as a gradual decline of physiological functions and homeostasis. Aging inevitably leads to age-associated injuries, diseases, and eventually death. The research on aging-associated diseases aimed at delaying, preventing or even reversing the aging process are of great significance for healthy aging and also for scientific progress. Numerous plant-derived compounds have anti-aging effects, but their therapeutic potential is limited due to their short shelf-life and low bioavailability. As the novel delivery system, nanoemulsion can effectively improve this defect. Nanoemulsions enhance the delivery of drugs to the target site, maintain the plasma concentration for a longer period, and minimize adverse reaction and side effects. This review describes the importance of nanoemulsions for the delivery of phyto-derived compounds and highlights the importance of nanoemulsions in the treatment of aging-related diseases. It also covers the methods of preparation, fate and safety of nanoemulsions, which will provide valuable information for the development of new strategies in treatment of aging-related diseases.

Improvement of stability and bioaccessibility of β-carotene by curcumin in pea protein isolate-based complexes-stabilized emulsions: Effect of protein complexation by pectin and small molecular surfactants

The impact of different complexes on the properties of β-carotene-loaded emulsions was investigated by measuring the droplet size, encapsulation efficiency, droplet morphology, and physical stability. The photo and thermal stability of β-carotene and its bioaccessibility during digestion were also analyzed. Comparing to the emulsions stabilized by other complexes, the emulsion stabilized by the high methoxyl pectin-rhamnolipid-pea protein isolate-curcumin (HMP-Rha-PPI-Cur) complex had the smallest droplet size (17.53 ± 0.15 μm) and the maximum encapsulation efficiency for curcumin (90.33 ± 0.03 %) and β-carotene (92.16 ± 0.01 %). The emulsion stabilized by the HMP-Rha-PPI-Cur complex exhibited better physical stability against creaming. The retention rate of β-carotene in the HMP-Rha-PPI-Cur complex-stabilized emulsion was 17.75 ± 0.02 and 33.64 ± 0.02 % after UV irradiation and thermal treatment. The HMP-Rha-PPI-Cur complex-stabilized emulsion also had a higher level of free fatty acid released (43.67 %) and higher bioaccessibility of β-carotene (32.35 ± 0.02 %).

Advances of plant-based structured food delivery systems on the in vitro digestibility of bioactive compounds

Food researchers are currently showing a growing interest in in vitro digestibility studies due to their importance for obtaining food products with health benefits and ensuring a balanced nutrient intake. Various bioactive food compounds are sensitive to the digestion process, which results in a lower bioavailability in the gut. The main objective of structured food delivery systems is to promote the controlled release of these compounds at the desired time/place, in addition to protecting them during digestion processes. This review provides an overview of the influence of structured delivery systems on the in vitro digestive behavior. The main delivery systems are summarized, the pros and cons of different structures are outlined, and examples of several studies that optimized the use of these structured systems are provided. In addition, we have reviewed the use of plant-based systems, which have been of interest to food researchers and the food industry because of their health benefits, improved sustainability as well as being an alternative for vegetarian, vegan and consumers suffering from food allergies. In this context, the review provides new insights and comprehensive knowledge regarding the influence of plant-based structured systems on the digestibility of encapsulated compounds and proteins/polysaccharides used in the encapsulation process.

Biopolymer Additives Enhance Tangeretin Bioavailability in Emulsion-Based Delivery Systems: An In Vitro and In Vivo Study

The oral bioavailability of tangeretin, a poly(methoxyflavone) found in citrus fruits, is typically very low because of its extremely limited solubility. In this research, tangeretin was encapsulated within whey protein-stabilized emulsions containing ingredients that may alter their behavior under gastrointestinal conditions and enhance the bioavailability of tangeretin after oral administration: cinnamaldehyde (CA), gum arabic (GA), or hydroxypropyl methylcellulose (HPMC). The presence of these ingredients altered the size, aggregation state, and encapsulation efficiency of tangeretin in the emulsions. In vitro studies demonstrated that the bioaccessibility of the encapsulated tangeretin was much higher than that of a crude tangeretin oil suspension. Particularly, the addition of HPMC increased the bioaccessibility of tangeretin from around 36 to 90%. In vivo pharmacokinetics results using rats indicated that tangeretin concentration in the plasma increased from 4- to 20-fold after encapsulation, especially in the presence of HPMC. HPMC also prolonged the release of tangeretin to 22 h. Tangeretin preferentially accumulated within the liver and kidney of the animals. Overall, the knowledge confirmed that structured emulsion-based delivery systems could be used to improve the oral bioavailability of hydrophobic functional ingredients.

Cocrystals to tune oily vitamin E into crystal vitamin E

d-α-tocopherol (d-αToc), the most biologically active form of natural Vitamin E, is oily in appearance and unstable to oxygen. Esterification and encapsulation are generally needed to stabilize and solidify d-αToc for the purpose of its expanding applications. In this study, we propose a more effective way to stabilize and solidify d-αToc oil in one step. By cocrystallization, the melting point of d-αToc is significantly increased, such that the oily d-αToc is successfully transformed into solid form at room temperature. The single crystal structure of d-αToc was firstly uncovered and the molecular interaction in cocrystals was revealed. Crystalline Vitamin E shows high stability to light and temperature. Its spherical crystallization affords good powder flowability, which is extremely important as food or feed additives. Moreover, cocrystal Vitamin E remains the original form of tocopherol without esterification and thus has a great advantage on higher bioavailability. Cocrystallization of oily d-αToc spares the use of acetic ester and a mass of excipients, which is of great environmental importance and greatly reduces the production cost.

Advances in edible nanoemulsions: Digestion, bioavailability, and potential toxicity

The design, fabrication, and application of edible nanoemulsions for the encapsulation and delivery of bioactive agents has been a highly active research field over the past decade or so. In particular, they have been widely used for the encapsulation and delivery of hydrophobic bioactive substances, such as hydrophobic drugs, lipids, vitamins, and phytochemicals. A great deal of progress has been made in creating stable edible nanoemulsions that can increase the stability and efficacy of these bioactive agents. This article highlights some of the most important recent advances within this area, including increasing the water-dispersibility of bioactives, protecting bioactives from chemical degradation during storage, increasing the bioavailability of bioactives after ingestion, and targeting the release of bioactives within the gastrointestinal tract. Moreover, it highlights progress that is being made in creating plant-based edible nanoemulsions. Finally, the potential toxicity of edible nanoemulsions is considered.

Impact of Pleurotus ostreatus β-Glucans on Oxidative Stability of Active Compounds Encapsulated in Powders during Storage and In Vitro Digestion

Polyunsaturated fatty acids and α-tocopherol were encapsulated in powders by spray drying using maltodextrins DE 12 as wall material and different emulsifiers (Tween®20, acacia gum or β-glucans-rich extracts from Pleurotus ostreatus). The aim was to study the effects of the surfactants on: (a) the oil droplet size distribution and α-tocopherol stability during in vitro digestion, and (b) the oxidative stability during 15 days of accelerated storage. Acacia gum sample had the most stable particle size distribution up to the gastric phase, but showed a significant α-tocopherol degradation prior to the intestinal stage. On the contrary, β-glucan-samples displayed a bimodal distribution in the oral and gastric phases but retained α-tocopherol up to the beginning of the intestinal stage. At the end of intestinal stage, no α-tocopherol was found in the samples. The storage study showed that β-glucans improved the oxidative stability of the powders, which displayed 82% α-tocopherol retention after 5 days under accelerated conditions (60 °C), corresponding to 310 days at 20 °C, while acacia gum and Tween® 20 did not delay α-tocopherol degradation. Results highlight the potential antioxidant activity of β-glucans used as emulsifying agents during in vitro digestion and accelerated aging conditions.

Heat stability of emulsions using functionalized milk protein concentrate generated by supercritical fluid extrusion

In this study, thermostable oil-in-water emulsions containing high protein contents were developed using milk protein concentrate (MPC) that was functionalized by supercritical fluid extrusion (SCFX) processing at low temperature and shear. Functionalized MPC (f-MPC) emulsions (3% protein-80% oil and 10% protein-50% oil) were compared with emulsions stabilized by commercial MPC (c-MPC), sodium caseinate (NaCas), and a commercial mayonnaise for their emulsifying properties and heat stability at 70 and 90 °C for 30 min, and 121 °C for 15 min. Zeta-potentials and interfacial protein concentrations of f-MPC emulsions were higher than that of c-MPC emulsions. f-MPC emulsions remained stable against creaming for at least 8 weeks at room temperature (23 °C), while their c-MPC counterparts showed significant creaming at the same conditions. Even after heating at 121 °C for 15 min, f-MPC emulsions retained their structural integrity as observed from their confocal images, droplet size distributions, and viscosities. In contrast, c-MPC emulsions and mayonnaise disintegrated upon heating at 121 °C for 15 min, and oil droplets of mayonnaise partially coalesced during heating at 90 °C for 30 min. f-MPC emulsions revealed higher viscosities compared to c-MPC emulsions, providing them improved stability. Viscosities of f-MPC emulsions were not significantly affected by heating at 90 °C for 30 min, while other emulsions exhibited a substantial increase in their viscosities due to protein denaturation and aggregation. Thus, f-MPC emulsions can be utilized in the development of protein-enriched functional foods (e.g., spreads) that are stable against high heat treatments.

Effect of emulsifiers on linseed oil emulsion structure, lipolysis and oxidation during in vitro digestion

Health benefits have been associated with the consumption of omega-3 polyunsaturated fatty acids (PUFA). Linseed oil is rich in long chain omega-3 PUFA, but can generate toxic compounds due to its high susceptibility to oxidation. The nature of the emulsifier can affect both lipolysis and oxidation during digestion since these phenomena occur at the oil-water interface. The objective of this study was to compare the effect of low-molecular weight surfactants (cetyltrimethylammonium bromide (CTAB), Citrem), protein (sodium caseinate, fish gelatin) and polysaccharides (gum arabic, modified starch) on the structure of linseed oil emulsions, lipolysis and formation of reactive oxidation species during in vitro digestion. The emulsion stabilized with Citrem underwent extensive coalescence in the gastric phase, which strongly decreased the extent of lipid digestion and reduced the formation of oxidation markers relative to other emulsions. Emulsions stabilized by proteins and modified starch showed aggregation with partial coalescence in the gastric phase, but protein-stabilized emulsions showed better resistance to oxidation. This study shows that emulsifier properties affect the susceptibility of the emulsion to aggregation and coalescence in the gastrointestinal environment, and strongly influence the extent of lipid digestion and the formation of reactive oxidation products. These findings point out the importance of the choice of the emulsifier to control the lipid digestibility and the protection of sensible lipids thus promoting optimal nutritional properties in omega-3-enriched foods.