Substituent Effects on the Self-Assembly/Coassembly and Hydrogelation of Phenylalanine Derivatives

Methods of changing low molecular weight gel properties through gelation kinetics

Low molecular weight gels continue to attract notable interest, with many potential applications. However, there are still significant gaps in our understanding of these systems and the correlation between the pre-gel and final gel states. The kinetics of the gelation process plays a crucial role in the bulk properties of the hydrogel and presents an opportunity to fine-tune these systems to meet the requirements of the chosen application. Therefore, it is possible to use a single gelator for multiple applications. This review discusses four ways to modify the pre-gelled structures before triggering gelation. Such modifications can enhance the material's intended performance, which may result in significant advancements in high-tech areas, such as drug delivery, cell culturing, electronics, and tissue engineering.

Evaluation of Pharmacokinetic and Pharmacodynamic (PK/PD) of Novel Fluorenylmethoxycarbonyl- Phenylalanine Antimicrobial Agent

OBJECTIVE

To assess the pharmacokinetic profile, in-vivo toxicity, and efficacy of 9-Fluorenylmethoxycarbonyl-L-phenylalanine (Fmoc-F) as a potential antibacterial agent, with a focus on its suitability for clinical translation.

METHODS

An RP-HPLC-based bio-analytical method was developed and qualified to quantify Fmoc-F levels in mouse plasma for pharmacokinetic analysis. Oral bioavailability was determined, and in-vivo toxicity was evaluated following intra-peritoneal administration. Efficacy was assessed by measuring the reduction in Staphylococcus aureus burden and survival rates in BALB/c mice.

RESULTS

The RP-HPLC method is highly sensitive, detecting as low as 0.8 µg mL-1 (~ 2 µM) of Fmoc-F in blood plasma. This study revealed that Fmoc-F has an oral bioavailability of 65 ± 18% and suitable pharmacokinetic profile. Further, we showed that intra-peritoneal administration of Fmoc-F is well tolerated by BALB/c mice and Fmoc-F treatment (100 mg/kg, i.p.) significantly reduces Staphylococcus aureus burden from visceral organs in BALB/c mice but falls short in enhancing survival rates at higher bacterial loads.

CONCLUSIONS

The study provides crucial insights into the pharmacokinetic and pharmacodynamic properties of Fmoc-F. The compound displayed favourable oral bioavailability and in-vivo tolerance. Its significant reduction of bacterial burden underscores its potential as a treatment for systemic infections. However, limited effectiveness for severe infections, short half-life, and inflammatory response at higher doses need to be addressed for its clinical application.

Cationic and amphiphilic peptide-based hydrogels with dual activities as anticancer and antibacterial agents

The emergence of peptide-based functional biomaterials is on the rise. To fulfil this purpose, a series of amphiphilic peptides, such as H2N-X-Met-Phe-C12H25, where X = L-lysine (CP1), X = L-histidine (CP2), and X = L-leucine (CP3), have been designed, synthesised, purified and fully characterised. Herein, we reported peptide-based supramolecular hydrogels with antibacterial and anticancer activities. An attempt has been made to investigate the antibacterial properties of these peptide-based hydrogels against Gram-positive (S. aureus and B. subtilis) and Gram-negative (E. coli and P. aeruginosa) bacteria. Investigations show that the L-lysine containing gelator, CP1, is active against both Gram-positive and Gram-negative bacteria and the L-histidine containing gelator, CP2, selectively inhibits the growth of Gram-negative bacteria. Interestingly, the L-leucine containing gelator, CP3, does not show any antibacterial properties. Moreover, the L-lysine containing gelator exhibits the best potency. Generation of reactive oxygen species (ROS) is a probable way to damage the bacterial membrane. To explore the cytotoxic properties and to determine the efficacy of the synthesized compounds in inhibiting cell viability, a comprehensive investigation was performed using three distinct cell lines: MDA-MB-231 (human triple-negative breast cancer), MDA-MB-468 (human triple-negative breast cancer) and HEK 293 (human embryonic kidney). Remarkably, the results of our study revealed a substantial cytotoxic impact of these peptide gelators on the MDA-MB-231 and MDA-MB-468 cell lines in comparison to the HEK 293 cells. Caspase 3/7 activity is the possible mechanistic path to determine the apoptotic rates of the cell lines. This finding emphasizes the promising potential of these peptide-based gelators in targeting and suppressing the growth of human triple negative breast cancer cells, while showing non-cytotoxicity towards non-cancerous HEK 293 cells. In a nutshell, these peptide-based materials are coming to light as next generation biomaterials.

Bioinspired Amino Acid Based Materials in Bionanotechnology: From Minimalistic Building Blocks and Assembly Mechanism to Applications

Inspired by natural hierarchical self-assembly of proteins and peptides, amino acids, as the basic building units, have been shown to self-assemble to form highly ordered structures through supramolecular interactions. The fabrication of functional biomaterials comprised of extremely simple biomolecules has gained increasing interest due to the advantages of biocompatibility, easy functionalization, and structural modularity. In particular, amino acid based assemblies have shown attractive physical characteristics for various bionanotechnology applications. Herein, we propose a review paper to summarize the design strategies as well as research advances of amino acid based supramolecular assemblies as smart functional materials. We first briefly introduce bioinspired reductionist design strategies and assembly mechanism for amino acid based molecular assembly materials through noncovalent interactions in condensed states, including self-assembly, metal ion mediated coordination assembly, and coassembly. In the following part, we provide an overview of the properties and functions of amino acid based materials toward applications in nanotechnology and biomedicine. Finally, we give an overview of the remaining challenges and future perspectives on the fabrication of amino acid based supramolecular biomaterials with desired properties. We believe that this review will promote the prosperous development of innovative bioinspired functional materials formed by minimalistic building blocks.

Phenylalanine-based fibrillar systems

Phenylketonuria (PKU) is an inborn metabolic disorder characterized by excess accumulation of phenylalanine (Phe) and its fibril formation, resulting in progressive intellectual disability. Several research groups have approached from various directions to understand the formation of toxic amyloid fibrils from the essential amino acid Phe. Different parameters like the nature of the solvent, pH, Phe concentration, temperature, etc. influence the fibril formation kinetics. In this article, we have summarized all major findings regarding the formation of Phe-based fibrils in aqueous and organic media and discussed how non-covalent interactions are involved in the self-assembly process using spectroscopic and microscopic techniques. The toxicity of Phe-based fibrils is compared with other neurodegenerative peptides. It is noted that the Phe-based fibrils can also induce various globular proteins into toxic fibrils. Later, we discuss the different approaches to inhibit fibril formation and reduce its toxicity. The presence of polyphenolic compounds, drugs, amino acids, nanoparticles, metal ions, crown ethers, and others showed a remarkable inhibitory effect on fibril formation. To the best of our knowledge, this is the first-ever etymological analysis of the Phe-fibrillar system and its inhibition to create a strong database against PKU.

Self-Sorting in Diastereomeric Mixtures of Functionalized Dipeptides

Self-sorting in functionalized dipeptide systems can be driven by the chirality of a single amino acid, both at a high pH in the micellar state and at a low pH in the gel state. The structures formed are affected to some degree by the relative concentrations of each component showing the complexity of such an approach. The structures underpinning the gel network are predefined by the micellar structures at a high pH. Here, we describe the systems prepared from two dipeptide-based gelators that differ only by the chirality of one of the amino acids. We provide firm evidence for self-sorting in the micellar and gel phases using small-angle neutron scattering and cryo-transmission electron microscopy (cryo-TEM), showing that complete self-sorting occurs across a range of relative concentrations.

Supramolecular Phenylalanine-Derived Hydrogels for the Sustained Release of Functional Proteins

Protein-based therapeutics have emerged as next-generation pharmaceutical agents for oncology, bone regeneration, autoimmune disorders, viral infections, and other diseases. The clinical application of protein therapeutics has been impeded by pharmacokinetic and pharmacodynamic challenges including off-target toxicity, rapid clearance, and drug stability. Strategies for the localized and sustained delivery of protein therapeutics have shown promise in addressing these challenges. Hydrogels are critical materials that enable these delivery strategies. Supramolecular hydrogels composed of self-assembled materials have demonstrated biocompatibility advantages over polymer hydrogels, with peptide and protein-based gels showing strong potential. However, cost is a significant drawback of peptide-based supramolecular hydrogels. Supramolecular hydrogels composed of inexpensive low-molecular-weight (LMW) gelators, including modified amino acid derivatives, have been reported as viable alternatives to peptide-based materials. Herein, we report the encapsulation and release of proteins from supramolecular hydrogels composed of perfluorinated fluorenylmethyloxcarbonyl-modified phenylalanine (Fmoc-F₅-Phe-DAP). Specifically, we demonstrate release of four model proteins (ribonuclease A (RNase A), trypsin inhibitor (TI), bovine serum albumin (BSA), and human immunoglobulin G (IgG)) from these hydrogels. The emergent viscoelastic properties of these materials are characterized, and the functional and time-dependent release of proteins from the hydrogels is demonstrated. In addition, it is shown that the properties of the aqueous solution used for hydrogel formulation have a significant influence on the in vitro release profiles, as a function of the isoelectric point and molecular weight of the protein payloads. These studies collectively validate that this class of supramolecular LMW hydrogel possesses the requisite properties for the sustained and localized release of protein therapeutics.

Anion Effects on the Supramolecular Self-Assembly of Cationic Phenylalanine Derivatives

Supramolecular hydrogels have emerged as a class of promising biomaterials for applications such as drug delivery and tissue engineering. Self-assembling peptides have been well studied for such applications, but low molecular weight (LMW) amino acid-derived gelators have attracted interest as low-cost alternatives with similar emergent properties. Fluorenylmethyloxycarbonyl-phenylalanine (Fmoc-Phe) is one such privileged motif often chosen due to its inherent self-assembly potential. Previously, we developed cationic Fmoc-Phe-DAP gelators that assemble into hydrogel networks in aqueous NaCl solutions of sufficient ionic strength. The chloride anions in these solutions screen the cationic charge of the gelators to enable self-assembly to occur. Herein, we report the effects of varying the anions of sodium salts on the gelation potential, nanoscale morphology, and hydrogel viscoelastic properties of Fmoc-Phe-DAP and two of its fluorinated derivatives, Fmoc-3F-Phe-DAP and Fmoc-F₅-Phe-DAP. It was observed that both the anion identity and gelator structure had a significant impact on the self-assembly and gelation properties of these derivatives. Changing the anion identity resulted in significant polymorphism of the nanoscale morphology of the assembled states that was dependent on the chemical structure of the gelator. The emergent viscoelastic character of the hydrogel networks was also found to be reliant on the anion identity and gelator structure. These results demonstrate the complex interplay between the gelator and environment that have a profound and often unpredictable impact on both self-assembly properties and emergent viscoelasticity in supramolecular hydrogels formed by LMW compounds. This work also illustrates the current lack of understanding that limits the rational design of potential biomaterials that will be in contact with complex biological fluids and provides motivation for additional research to correlate the chemical structure of LMW gelators with the structure and emergent properties of the resulting supramolecular assemblies as a function of environment.

Short Peptide-Based Smart Thixotropic Hydrogels †

Thixotropy is a fascinating feature present in many gel systems that has garnered a lot of attention in the medical field in recent decades. When shear stress is applied, the gel transforms into sol and immediately returns to its original state when resting. The thixotropic nature of the hydrogel has inspired scientists to entrap and release enzymes, therapeutics, and other substances inside the human body, where the gel acts as a drug reservoir and can sustainably release therapeutics. Furthermore, thixotropic hydrogels have been widely used in various therapeutic applications, including drug delivery, cornea regeneration and osteogenesis, to name a few. Because of their inherent biocompatibility and structural diversity, peptides are at the forefront of cutting-edge research in this context. This review will discuss the rational design and self-assembly of peptide-based thixotropic hydrogels with some representative examples, followed by their biomedical applications.

Side-chain halogen effects on self-assembly and hydrogelation of cationic phenylalanine derivatives

Low molecular weight (LMW) supramolecular hydrogels have great potential as next-generation biomaterials for drug delivery, tissue engineering, and regenerative medicine. The design of LMW gelators is complicated by the lack of understanding regarding how the chemical structure of the gelator correlates to self-assembly potential and emergent hydrogel material properties. The fluorenylmethyloxycarbonyl-phenylalanine (Fmoc-Phe) motif is a privileged scaffold that is prone to undergo self-assembly into self-supporting hydrogel networks. Cationic Fmoc-Phe-DAP derivatives modified with diaminopropane (DAP) at the C-terminus have been developed that self-assemble into hydrogel networks in aqueous solutions of sufficient ionic strength. We report herein the impact of side-chain halogenation on the self-assembly and hydrogelation properties of Fmoc-Phe-DAP derivatives. A systematic study of the self-assembly and hydrogelation of monohalogenated Fmoc-Phe-DAP derivatives with F, Cl, or Br atoms in the ortho, meta, or para positions of the phenyl side chain reveal significant differences in self-assembly and gelation potential, nanoscale assembly morphology, and hydrogel viscoelastic properties as a function of halogen identity and substitution position. These results demonstrate the profound impact that subtle changes to the chemical scaffold can have on the behavior of LMW supramolecular gelators and illustrate the ongoing difficulty of predicting the emergent self-assembly and hydrogelation behavior of LMW gelators that differ even modestly in chemical structure.

Recent Advances in Zwitterionic Hydrogels: Preparation, Property, and Biomedical Application

Nonspecific protein adsorption impedes the sustainability of materials in biologically related applications. Such adsorption activates the immune system by quick identification of allogeneic materials and triggers a rejection, resulting in the rapid failure of implant materials and drugs. Antifouling materials have been rapidly developed in the past 20 years, from natural polysaccharides (such as dextran) to synthetic polymers (such as polyethylene glycol, PEG). However, recent studies have shown that traditional antifouling materials, including PEG, still fail to overcome the challenges of a complex human environment. Zwitterionic materials are a class of materials that contain both cationic and anionic groups, with their overall charge being neutral. Compared with PEG materials, zwitterionic materials have much stronger hydration, which is considered the most important factor for antifouling. Among zwitterionic materials, zwitterionic hydrogels have excellent structural stability and controllable regulation capabilities for various biomedical scenarios. Here, we first describe the mechanism and structure of zwitterionic materials. Following the preparation and property of zwitterionic hydrogels, recent advances in zwitterionic hydrogels in various biomedical applications are reviewed.

Peptide-based nanomaterials: Self-assembly, properties and applications

Peptide-based materials that have diverse structures and functionalities are an important type of biomaterials. In former times, peptide-based nanomaterials with excellent stability were constructed through self-assembly. Compared with individual peptides, peptide-based self-assembly nanomaterials that form well-ordered superstructures possess many advantages such as good thermo- and mechanical stability, semiconductivity, piezoelectricity and optical properties. Moreover, due to their excellent biocompatibility and biological activity, peptide-based self-assembly nanomaterials have been vastly used in different fields. In this review, we provide the advances of peptide-based self-assembly nanostructures, focusing on the driving forces that dominate peptide self-assembly and assembly mechanisms of peptides. After that, we outline the synthesis and properties of peptide-based nanomaterials, followed by the applications of functional peptide nanomaterials. Finally, we provide perspectives on the challenges and future of peptide-based nanomaterials.

•

This review summarizes the advances of peptide-based nanomaterials, focusing on the mechanisms, properties, and applications.

•

Outlining the synthesis and properties of peptide nanomaterials is helpful for the relevant research fields.

•

The peptide-based nanomaterials show potential applications in many fields.

Stimuli-Responsive Nucleotide-Amino Acid Hybrid Supramolecular Hydrogels

The ability to assemble chemically different gelator molecules into complex supramolecular hydrogels provides excellent opportunities to construct functional soft materials. Herein, we demonstrate the formation of hybrid nucleotide–amino acid supramolecular hydrogels. These are generated by the silver ion (Ag⁺)-triggered formation of silver–guanosine monophosphate (GMP) dimers, which undergo self-assembly through non-covalent interactions to produce nanofilaments. This process results in a concomitant pH reduction due to the abstraction of a proton from the guanine residue, which triggers the in situ gelation of a pH-sensitive amino acid, N-fluorenylmethyloxycarbonyl tyrosine (FY), to form nucleotide–amino acid hybrid hydrogels. Alterations in the supramolecular structures due to changes in the assembly process are observed, with the molar ratio of Ag:GMP:FY affecting the assembly kinetics, and the resulting supramolecular organisation and mechanical properties of the hydrogels. Higher Ag:GMP stoichiometries result in almost instantaneous gelation with non-orthogonal assembly of the gelators, while at lower molar ratios, orthogonal assembly is observed. Significantly, by increasing the pH as an external stimulus, nanofilaments comprising FY can be selectively disassembled from the hybrid hydrogels. Our results demonstrate a simple approach for the construction of multicomponent stimuli-responsive supramolecular hydrogels with adaptable network and mechanical properties.

Modification of a Single Atom Affects the Physical Properties of Double Fluorinated Fmoc-Phe Derivatives

Supramolecular hydrogels formed by the self-assembly of amino-acid based gelators are receiving increasing attention from the fields of biomedicine and material science. Self-assembled systems exhibit well-ordered functional architectures and unique physicochemical properties. However, the control over the kinetics and mechanical properties of the end-products remains puzzling. A minimal alteration of the chemical environment could cause a significant impact. In this context, we report the effects of modifying the position of a single atom on the properties and kinetics of the self-assembly process. A combination of experimental and computational methods, used to investigate double-fluorinated Fmoc-Phe derivatives, Fmoc-3,4F-Phe and Fmoc-3,5F-Phe, reveals the unique effects of modifying the position of a single fluorine on the self-assembly process, and the physical properties of the product. The presence of significant physical and morphological differences between the two derivatives was verified by molecular-dynamics simulations. Analysis of the spontaneous phase-transition of both building blocks, as well as crystal X-ray diffraction to determine the molecular structure of Fmoc-3,4F-Phe, are in good agreement with known changes in the Phe fluorination pattern and highlight the effect of a single atom position on the self-assembly process. These findings prove that fluorination is an effective strategy to influence supramolecular organization on the nanoscale. Moreover, we believe that a deep understanding of the self-assembly process may provide fundamental insights that will facilitate the development of optimal amino-acid-based low-molecular-weight hydrogelators for a wide range of applications.

Understanding gel-to-crystal transitions in supramolecular gels

Most supramolecular gels are stable or assumed to be stable over time, and aging effects are often not studied. However, some gels do show clear changes on aging, and a small number of systems exhibit gel-to-crystal transitions. In these cases, crystals form over time, typically at the expense of the network underpinning the gel; this leads to the gel falling apart. These systems are rare, and little is known about how these gel-to-crystal transitions occur. Here, we use a range of techniques to understand in detail a gel-to-crystal transition for a specific functionalised dipeptide based gelator. We show that the gel-to-crystal transition depends on the final pH of the medium which we control by varying the amount of glucon-δ-lactone (GdL) added. In the gel phase, at low concentrations of GdL, and at early time points with high concentrations of GdL, we are able to show the nanometre scale dimensions of the self-assembled fibre using SAXS; however there is no evidence of molecular ordering of the gel fibres in the WAXS. At low concentrations of GdL, these self-assembled fibres stiffen with time but do not crystallise over the timescale of the SAXS experiment. At high concentrations of GdL, the fibres are already stiffened, and then, as the pH drops further, give way to the presence of crystals which appear to grow preferentially along the direction of the fibre axis. We definitively show therefore that the gel and crystal phase are not the same. Our work shows that many assumptions in the literature are incorrect. Finally, we also show that the sample holder geometry is an important parameter for these experiments, with the rate of crystallisation depending on the holder in which the experiment is carried out.

Gelation of a Pentapeptide in Alcohols

Properties of solvents such as polarity and H-bond-forming ability are critical for the formation of an organogel and have a significant impact on the gel behavior, as solvents are the majority of organogel systems. However, so far, there is still a lack of systematic studies regarding the effects of molecular structures of solvents on the characteristics of organogels. Motivated by revealing such a relationship, in this paper, we studied the morphologies of assemblies, gelation behaviors, and secondary structures of a pentapeptide termed EAF-5 in a wide variety of alcohols. The side chains and lengths of carbon chains of the solvent molecules were found to play a critical role in the self-assembly and gelation of EAF-5. EAF-5 was capable of self-assembling into fibers and entangling into a network in alcohols including ethanol, propanol, butanol, n-pentanol, and n-hexanol, which further immobilized the corresponding alcohols to form gels. In these organogels, increasing β-sheet secondary structures of the peptides were formed by introducing side chains and extending the length of primary alcohol molecules. We hypothesized that alcohol molecules with extended lengths and side chains reduced the gelator-solvent interactions and promoted the gelator-gelator interactions, resulting in the self-assembly of EAF-5 into fibril structures and development of gels. These findings provide a new sight into the interactions between gelators and solvents and are helpful for designing peptide-based organogelators.

From Folding to Assembly: Functional Supramolecular Architectures of Peptides Comprised of Non-Canonical Amino Acids

The engineering of biological molecules is the fundamental concept behind the design of complex materials with desirable functions. Over the last few decades, peptides and proteins have emerged as useful building blocks for well-defined nanostructures with controlled size and dimensions. Short peptides in particular have received much attention due to their inherent biocompatibility, lower synthetic cost, and ease of tunability. In addition to the diverse self-assembling properties of short peptides comprising coded amino acids and their emerging applications in nanotechnology, there is now growing interest in the properties of peptides composed of non-canonical amino acids. Such non-natural oligomers have been shown in recent years to form well-defined secondary structures similar to natural proteins, with the ability to self-assemble to generate a wide variety of nanostructures with excellent biostability. This review describes recent events in the development of supramolecular assemblies of peptides composed completely of non-coded amino acids and their hybrid analogues. Special attention is paid to understanding the supramolecular assemblies at the atomic level and to considering their potential applications in nanotechnology.

Co-assembly and multicomponent hydrogel formation upon mixing nucleobase-containing peptides

Peptide-based hydrogels are physical gels formed through specific supramolecular self-assembling processes, leading to ordered nanostructures which constitute the water entrapping scaffold of the soft material. Thanks to the inherent properties of peptides, these hydrogels are highly considered in the biomedical domain and open new horizons in terms of application in advanced therapies and biotechnologies. The use of one, and only one, native peptide to formulate a gel is by far the most reported approach to design such materials, but suffers from several limitations, including in terms of mechanical properties. To improve peptide-based hydrogels interest and give rise to innovative properties, several strategies have been proposed in the recent years, and the development of multicomponent peptide-based hydrogels appears as a promising and relevant strategy. Indeed, mixing two or more compounds to develop new materials is a much-used approach that has proven its effectiveness in a wide variety of domains, including polymers, composites and alloys. While still limited to a handful of examples, we would like to report herein on the formulation and the comprehensive study of multicomponent hybrid DNA-nucleobase/peptide-based hydrogels using a multiscale approach based on a large panel of analytical techniques (i.e., rheometry, proton relaxometry, SAXS, electronic microscopy, infrared, circular dichroism, fluorescence, Thioflavin T assays). Among the six multicomponent systems studied, the results highlight the synergistic role of the presence of the two complementary DNA-nucleobases (i.e., adenine/thymine and guanine/cytosine) on the co-assembling process from structural (e.g., morphology of the nanoobjects) to physicochemical (e.g., kinetics of formation, fluorescence properties) and mechanical (e.g., stiffness, resistance to external stress) properties. All the data confirm the relevance of the multicomponent peptide-based approach in the design of innovative hydrogels and bring another brick in the wall of the understanding of these complex and promising systems.

Higher-order interfiber interactions in the self-assembly of benzene-1,3,5-tricarboxamide-based peptides in water

Mimicking the complexity of biological systems with synthetic supramolecular materials requires a deep understanding of the relationship between the structure of the molecule and its self-assembly pattern. Herein, we report a series of water-soluble benzene-1,3,5-tricarboxamide-based di- and tripeptide derivatives modified with small non-bulky terminal amine salt to induce self-assembly into twisted one-dimensional higher-order nanofibers. The morphology of nanofibers strongly depends on the nature, order, and quantity of amino acids in the short peptide fragments and vary from simple cylindrical to complex helical. From observations of several fiber-splitting events, we detected interfiber interactions that always occur in a pairwise manner, which implies that the C3 symmetry of benzene-1,3,5-tricarboxamide-based molecules in higher-order fibers becomes gradually distorted, thus facilitating hydrophobic contact interactions between fibrils. The proposed mechanism of self-assembly through hydrophobic contact allowed the successful design of a compound with pH-responsive morphology, and may find use in the future development of complex hierarchical architectures with controlled functionality.

Luminescence sensitization of terbium-loaded supramolecular gels by hydroxybenzoic acids and used for salicylates sensing

The luminescent terbium (Tb³⁺)-loaded supramolecular gels were facilely prepared through the self-assembly of Fmoc-diphenylalanine (FmocPhePhe) at room temperature. Hydroxybenzoic acid (HA, the isomers are denoted as 2-HA, 3-HA, and 4-HA depending upon the positions of hydroxyl groups) was used as a sensitizer to Tb³⁺. The luminescence sensitization of Tb³⁺ in the gels was realized by the coordination with hydroxybenzoic acids. The spectra of luminescence, UV-vis, FT-IR, and ¹H NMR verified that this sensitization was attributed to the energy transfer from hydroxybenzoic acids to Tb³⁺. The results of XRD, SEM, and phase transfer temperature further indicated that the initial molecule arrangement of the gels was significantly changed by 2-HA, resulting in more ordered and more compact morphology of the gels. 2-HA exhibited more effective sensitization to Tb³⁺ in the gels than 3-HA and 4-HA. It was also found that 2-HA did not affect the self-assembly of FmocPhePhe. Due to the effective fluorescence sensitization by 2-HA, the as-prepared gels can be used for salicylic acid sensing with 6.8 μM of the detection limit. This strategy has been successfully used for the detection of salicylates in pharmaceuticals and cosmetics.

Fluorinated peptide biomaterials

Fluorinated compounds, while rarely used by nature, are emerging as fundamental ingredients in biomedical research, with applications in drug discovery, metabolomics, biospectroscopy, and, as the focus of this review, peptide/protein engineering. Leveraging the fluorous effect to direct peptide assembly has evolved an entirely new class of organofluorine building blocks from which unique and bioactive materials can be constructed. Here, we discuss three distinct peptide fluorination strategies used to design and induce peptide assembly into nano-, micro-, and macrosupramolecular states that potentiate high-ordered organization into material scaffolds. These fluorine-tailored peptide assemblies employ the unique fluorous environment to boost biofunctionality for a broad range of applications, from drug delivery to antibacterial coatings. This review provides foundational tactics for peptide fluorination and discusses the utility of these fluorous-directed hierarchical structures as material platforms in diverse biomedical applications.

Impact of gelation method on thixotropic properties of phenylalanine-derived supramolecular hydrogels

Supramolecular hydrogels formed by noncovalent self-assembly of low molecular weight (LMW) agents are promising next-generation biomaterials. Thixotropic shear response and mechanical stability are two emergent properties of hydrogels that are critical for biomedical applications including drug delivery and tissue engineering in which injection of the hydrogel will be necessary. Herein, we demonstrate that the emergent thixotropic properties of supramolecular phenylalanine-derived hydrogels are dependent on the conditions in which they are formulated. Specifically, hydrogels formed from fluorenylmethoxycarbonyl (Fmoc) modified phenylalanine derivatives, 3-fluorophenylalanine (Fmoc-3F-Phe) and pentafluorophenylalanine (Fmoc-F5-Phe), were characterized as a function of gelation conditions to examine how shear response and mechanical stability properties correlate to mode of gelation. Two distinct methods of gelation were compared. First, spontaneous self-assembly and gelation was triggered by a solvent exchange method in which a concentrated solution of the gelator in dimethylsulfoxide was diluted in water. Second, gelation was promoted by dissolution of the gelator in water at basic pH followed by gradual pH adjustment from basic to mildly acidic by the hydrolysis of glucono-delta-lactone. Hydrogels formed under solvent exchange conditions were mechanically unstable and poorly shear-responsive whereas hydrogels formed by gradual acidification were temporally stable and had highly shear-responsive viscoelastic character. These studies confirm that gelation environment and mechanism have a significant influence on the emergent properties of supramolecular hydrogels and offer insight into how gelation conditions can be used to tune hydrogel properties for specific applications.

Effects of fluoro substitutions and electrostatic interactions on the self-assembled structures and hydrogelation of tripeptides: tuning the mechanical properties of co-assembled hydrogels

A series of FFK tripeptides capped with phenylacetic acid of various fluoro-substitutions at the N-terminus has been synthesized and examined for self-assembly under aqueous conditions. The material properties of the FFK tripeptides dramatically changed from precipitate to hydrogel phase upon increasing the number of fluorine atoms. Peptides linked with benzyl (B-FFK) or monofluoro-benzyl (MFB-FFK) groups rapidly form solid precipitates under physiological pH conditions. The trifluoro-decorated compound (TFB-FFK) self-assembled into a metastable hydrogel which slowly transformed into a solid precipitate upon standing. A stable hydrogel formation was noticed in the case of the pentafluorobenzyl-diphenylalanyllysine (PFB-FFK) compound. TEM analysis indicates that the PFB-FFK peptide assembled into twisted nanofibril structures, which are predominantly stabilized by strong quadrupole π-stacking interactions and electrostatic interactions of amino acid side chains. Furthermore, the combination of PFB-FFK and PFB-FFD peptides was also investigated for hydrogelation and the self-assembly of such systems resulted in the formation of untwisted 1D nanofibril structures. Supramolecular coassembled hydrogels of variable stiffness have also been achieved by modulating the concentration of the peptide components, which was evident from the rheological analysis. Such low molecular weight (LMW) peptide materials with tuneable mechanical properties might be a potential material for a wide range of applications in nanotechnology and biotechnology.

Peptide-Based Gel in Environmental Remediation: Removal of Toxic Organic Dyes and Hazardous Pb2+ and Cd2+ Ions from Wastewater and Oil Spill Recovery

A dipeptide-based synthetic amphiphile bearing a myristyl chain has been found to form hydrogels in the pH range 6.9-8.5 and organogels in various organic solvents including petroleum ether, diesel, kerosene, and petrol. These organogels and hydrogels have been thoroughly studied and characterized by different techniques including high-resolution transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and rheology. It has been found that the xerogel obtained from the peptide gelator can trap various toxic organic dyes from wastewater efficiently. Moreover, the hydrogel has been used to remove toxic heavy metal ions Pb²⁺ and Cd²⁺ from wastewater. Dye adsorption kinetics has been studied, and it has been fitted by using the Freundlich isotherm equation. Interestingly, the gelator amphiphilic peptide gels fuel oil, kerosene, diesel, and petrol in a biphasic mixture of salt water and oil within a few seconds. This indicates that these gels not only may find application in oil spill recovery but also can be used to remove toxic organic dyes and hazardous toxic metal ions from wastewater. Moreover, the gelator can be recycled several times without significant loss of activity, suggesting the sustainability of this new gelator. This holds future promise for environmental remediation by using peptide-based gelators.

Electrostatic interactions regulate the release of small molecules from supramolecular hydrogels

Supramolecular hydrogels have great potential as biomaterials for sustained delivery of therapeutics. While peptide-based supramolecular hydrogels have been developed that show promise for drug delivery applications, the high cost of production has limited their widespread adoption. Low molecular weight (LMW) supramolecular hydrogels are emerging as attractive and inexpensive alternatives to peptide-based hydrogels. We recently reported novel cationic fluorenylmethyloxycarbonyl-modified phenylalanine (Fmoc-Phe) hydrogels for localized and sustained in vivo release of an anti-inflammatory agent for functional pain remediation. In an effort to further elucidate design principles to optimize these materials for delivery of a variety of molecular agents, we herein report a systematic examination of electrostatic effects on the release of cargo molecules from Fmoc-Phe derived hydrogels. Specifically, we interrogate the release of cationic, anionic, and neutral cargo molecules from a series of cationic and anionic Fmoc-Phe derived hydrogels. We observed that cargo was readily released from the hydrogels except when the cargo and hydrogel network had complementary charges, in which case the cargo was highly retained in the network. These results demonstrate that the electrostatic characteristics of both the hydrogel network and the specific cargo are critical design parameters in the formulation of LMW supramolecular hydrogel systems in the development of next-generation materials for drug delivery applications.

Synthesis, experimental and in silico studies of N-fluorenylmethoxycarbonyl-O-tert-butyl-N-methyltyrosine, coupled with CSD data: a survey of interactions in the crystal structures of Fmoc-amino acids

Recently, fluorenylmethoxycarbonyl (Fmoc) amino acids (e.g. Fmoc-tyrosine or Fmoc-phenylalanine) have attracted growing interest in biomedical research and industry, with special emphasis directed towards the design and development of novel effective hydrogelators, biomaterials or therapeutics. With this in mind, a systematic knowledge of the structural and supramolecular features in recognition of those properties is essential. This work is the first comprehensive summary of noncovalent interactions combined with a library of supramolecular synthon patterns in all crystal structures of amino acids with the Fmoc moiety reported so far. Moreover, a new Fmoc-protected amino acid, namely, 2-{[(9H-fluoren-9-ylmethoxy)carbonyl](methyl)amino}-3-{4-[(2-hydroxypropan-2-yl)oxy]phenyl}propanoic acid or N-fluorenylmethoxycarbonyl-O-tert-butyl-N-methyltyrosine, Fmoc-N-Me-Tyr(t-Bu)-OH, C₂₉H₃₁NO₅, was successfully synthesized and the structure of its unsolvated form was determined by single-crystal X-ray diffraction. The structural, conformational and energy landscape was investigated in detail by combined experimental and in silico approaches, and further compared to N-Fmoc-phenylalanine [Draper et al. (2015). CrystEngComm, 42, 8047-8057]. Geometries were optimized by the density functional theory (DFT) method either in vacuo or in solutio. The polarizable conductor calculation model was exploited for the evaluation of the hydration effect. Hirshfeld surface analysis revealed that H...H, C...H/H...C and O...H/H...O interactions constitute the major contributions to the total Hirshfeld surface area in all the investigated systems. The molecular electrostatic potentials mapped over the surfaces identified the electrostatic complementarities in the crystal packing. The prediction of weak hydrogen-bonded patterns via Full Interaction Maps was computed. Supramolecular motifs formed via C-H...O, C-H...π, (fluorenyl)C-H...Cl(I), C-Br...π(fluorenyl) and C-I...π(fluorenyl) interactions are observed. Basic synthons, in combination with the Long-Range Synthon Aufbau Modules, further supported by energy-framework calculations, are discussed. Furthermore, the relevance of Fmoc-based supramolecular hydrogen-bonding patterns in biocomplexes are emphasized, for the first time.

Tuning the Supramolecular Structure and Function of Collagen Mimetic Ionic Complementary Peptides via Electrostatic Interactions

Collagen, the most abundant component of natural ECM, has attracted interest of scientific communities to replicate its multihierarchical self-assembling structure. Recent developments in collagen mimetic peptides were inclined toward the production of self-assembling short peptides capable of mimicking complex higher order structures with tunable mechanical properties. Here, we report for the first time, the crucial molecular design of oppositely charged collagen mimetic shortest bioactive pentapeptide sequences, as a minimalistic building block for development of next-generation biomaterials. Our rational design involves synthesis of two pentapeptides, where the fundamental molecular motif of collagen, that is, Gly-X-Y has been mutated at the central position with positively charged, lysine, and negatively charged, aspartate, residues. Depending on their overall surface charge, these peptides showed high propensity to form self-supporting hydrogel either at acidic or basic pH, which limits their biomedical applications. Interestingly, simple mixing of the two peptides was found to induce the coassembly of these designed peptides, which drives the formation of self-supporting hydrogel at physiological pH and thus enhanced the potential of exploring these peptides for biomedical purposes. This coassembly of ionic peptides was accompanied by the enhancement in the mechanical stiffness of the gels and reduction in overall zeta potential of the combined hydrogel, which provides the evidence for additional electrostatic interactions. Furthermore, the thixotropic nature of these gels offers an additional advantage of exploration of designer biomaterials as injectable gels. The nanofibers of coassembled hydrogel were found to be highly biocompatible to the fibroblast cells compared to the individual peptides, which was evident from their cytotoxicity studies. We anticipate that our rational design of ECM protein mimics in the form of short bioactive peptides will contribute significantly to the development of novel biomaterials and play a crucial role in the field of tissue engineering and regenerative medicines.

Tetrafluoroaryl azide as an N-terminal capping group for click-to-dissolve diphenylalanine hydrogels

The synthesis of a bioorthogonal-responsive low molecular weight diphenylalanine (PhePhe)-based hydrogel that is capped with a 4-azido-2,3,5,6-tetrafluorobenzyl carbamate self-immolative linker is reported. The hydrogelator (AzF₄-PhePhe) generates a stable hydrogel at 0.1 wt%, and rapidly reacts with the bioorthogonal reagent trans-cyclooctene (TCO), inducing a gel-to-solution transition. The critical gel concentration is five-fold lower than our previously synthesized non-fluorinated hydrogelator (Az-PhePhe), and the minimum concentration of TCO required for visible gel-to-solution transition in 24 hours is 1 mM. Doxorubicin can be encapsulated in the hydrogel and TCO-triggered dissolution results in 76% and 89% release after 10 and 24 hours, respectively. Compared with our non-substituted aryl azide capping group used for Az-PhePhe, the tetrafluorinated aryl azide group improves the stability of the hydrogel in unbuffered water at a lower critical gel concentration, while improving sensitivity towards the bioorthogonal reagent TCO.

A tetrafluoroaryl azide group attached to diphenylalanine via a carbamate linker provides a strong and stable hydrogel that undergoes a gel-to-solution transition following a rapid bioorthogonal 1,3,-dipolar cycloaddition.

Strategy to Identify Improved N-Terminal Modifications for Supramolecular Phenylalanine-Derived Hydrogelators

Supramolecular hydrogels formed by self-assembly of low molecular weight (LMW) compounds have been identified as promising materials for applications in tissue engineering and regenerative medicine. In many cases, the relationship between the chemical structure of the gelator and the emergent hydrogel properties is poorly understood. As a result, empirical screening strategies instead of rational design approaches are often relied upon to tune the emergent properties of the gels. Herein, we describe a novel strategy to identify improved phenylalanine (Phe) derived gelators using a focused empirical approach. Fluorenylmethoxycarbonyl (Fmoc) protected Phe derivatives are a privileged class of gelators that spontaneously self-assemble into fibrils that entangle to form a hydrogel network upon dissolution into water. However, the Fmoc group has been shown to have toxicity drawbacks for potential biological applications, requiring the identification of new N-terminal modifications that promote efficient self-assembly but lack the shortcomings of the Fmoc group. We previously discovered that fibrils in Fmoc-p-nitrophenylalanine (Fmoc-4-NO2-Phe) hydrogels transition to crystalline microtubes after several hours by a mechanism that involves the hierarchical assembly and fusion of the hydrogel fibrils. We hypothesized that this hierarchical crystallization behavior could form the basis of a screening approach to identify alternative N-terminal functional groups to replace Fmoc in Phe-derived LMW gelators. Specifically, screening N-terminal modifying groups for 4-NO2-Phe that stabilize the hydrogel state by preventing subsequent hierarchical crystallization would facilitate empirical identification of functional Fmoc replacements. To test this approach, we screened a small series of 4-NO2-Phe derivatives with various N-terminal modifying groups to determine if any provided stable LMW supramolecular hydrogels. All but one of the 4-NO2-Phe derivatives assembled into crystalline forms. Only the 1-naphthaleneacetic acid (1-Nap) 4-NO2-Phe derivative self-assembled into a stable hydrogel network. Additional Phe derivatives were modified by N-terminal 1-Nap groups to confirm the general potential of 1-Nap as a suitable replacement for Fmoc, and all derivatives formed stable hydrogels under similar conditions to their Fmoc-Phe counterparts. These results illustrate the potential of this approach to identify next-generation Phe-derived LMW gelators with improved emergent properties.

On the Mechanical Properties of N-Functionalised Dipeptide Gels

The properties of a hydrogel are controlled by the underlying network that immobilizes the solvent. For gels formed by the self-assembly of a small molecule, it is common to show the primary fibres that entangle to form the network by microscopy, but it is difficult to access information about the network. One approach to understand the network is to examine the effect of the concentration on the rheological properties, such that G'∝ cx, where G' is the storage modulus and c is the concentration. A number of reports link the exponent x to a specific type of network. Here, we discuss a small library of gels formed using functionalized dipeptides, and describe the underlying networks of these gels, using microscopy, small angle scattering and rheology. We show that apparently different networks can give very similar values of x.

Low Molecular Weight Supramolecular Hydrogels for Sustained and Localized In Vivo Drug Delivery

Supramolecular hydrogels are emerging as next-generation alternatives to synthetic polymers for drug delivery applications. Self-assembling peptides are a promising class of supramolecular gelator for in vivo drug delivery that have been slow to be adopted despite advantages in biocompatibility due to the relatively high cost of producing synthetic peptide hydrogels compared to synthetic polymer gels. Herein we describe the development and use of inexpensive low molecular weight cationic derivatives of phenylalanine (Phe) as injectable hydrogels for in vivo delivery of an anti-inflammatory drug, diclofenac, for pain mitigation in a mouse model. N-Fluorenylmethoxycarbonyl phenylalanine (Fmoc-Phe) derivatives were modified at the carboxylic acid with diaminopropane (DAP) to provide Fmoc-Phe-DAP molecules that spontaneously and rapidly self-assemble in aqueous solutions upon addition of physiologically relevant sodium chloride concentrations to give hydrogels. When self-assembly occurs in the presence of diclofenac, the drug molecule is efficiently encapsulated within the hydrogel network. These hydrogels exhibit robust shear-thinning behavior, mechanical stability, and drug release profiles to enable application as injectable hydrogels for in vivo drug delivery. Delivery of diclofenac in vivo was demonstrated by a localized injection of an Fmoc-F⁵-Phe-DAP/diclofenac hydrogel into the ankle joint of mice with induced ankle injury and associated inflammation-induced pain. Remediation of pain in the ankle joint was observed immediately after initial injection and was sustained for a period of nearly two weeks while diclofenac controls remediated pain for less than one day. This data demonstrates the promise of these supramolecular hydrogels as inexpensive next-generation materials for sustained and localized drug delivery in vivo.

Polar-π Interactions Promote Self-assembly of Dipeptides into Laminated Nanofibers

Precise incorporation of functional residues into sequences allows for tailoring the noncovalent interactions between peptides to guide their self-assembly into well-defined nanostructures, thus facilitating creation of artificial functional materials resembling natural systems. Here, we report on the self-assembly of dipeptides consisting of one fluorinated phenylalanine unit (Z residue) and one natural aromatic residue into laminated nanofibers predominately driven by polar-π interactions. On the basis of characterizations using transmission electron microscopy, scanning electron microscopy, atomic force microscopy, circular dichroism, Fourier transform infrared spectroscopy, and thioflavin T binding assay, we found that the face-centered stacking pattern of the dipeptides FZ, ZF, and ZY stabilized by the polar-π interactions and antiparallel β-sheet H-bonding interactions led to lamination of nanofibers and formation of ribbonlike nanostructures. Our findings demonstrate that incorporation of fluorinated aromatic units into short peptides not only promotes of polar-π interactions as alternative self-assembling driving forces but also governs the organizing pattern of peptides, thus benefiting creation of well-defined peptide nanostructures.

Tuning of hydrogel stiffness using a two-component peptide system for mammalian cell culture

Self-assembling peptide hydrogels (SAPHs) represent emerging cell cultures systems in several biomedical applications. The advantages of SAPHs are mainly ascribed to the absence of toxic chemical cross-linkers, the presence of ECM-like fibrillar structures and the possibility to produce hydrogels with a large range of different mechanical properties. We will present a two-component peptide system with tuneable mechanical properties, consisting of a small pentapeptide (SFFSF-NH2 , SA5N) that acts as a gelator and a larger 21-mer peptide (SFFSF-GVPGVGVPGVG-SFFSF, SA21) designed as a physical cross-linker. The hydrogels formed by different mixtures of the two peptides are made up mainly of antiparallel β-sheet nanofibers entangling in an intricate network. The effect of the addition of SA21 on the morphology of the hydrogels was investigated by atomic force microscopy and transmission electron microscopy and correlated to the mechanical properties of the hydrogel. Finally, the biocompatibility of the hydrogels using 2D cell cultures was tested. © 2018 The Authors. journal Of Biomedical Materials Research Part A Published By Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 535-544, 2019.

Annealing multicomponent supramolecular gels

Annealing is widely used as a means of changing the physical properties of a material. The rate of heating and cooling used in the annealing process controls the final properties. Annealing can be used as a means of driving towards the, or at least a, thermodynamic minimum. There is surprisingly little information on annealing kinetically-trapped supramolecular gels. Here, we show that annealing multicomponent gels can be used to prepare materials with tunable mechanical properties. We show that annealing in a two-component gel leads to a self-sorted network, which has significantly different mechanical properties to the as-prepared gels. Whilst the fibres are self-sorted, we show that the annealing of this system leads to significant change in the network level of assembly, and it is this that leads to the increase in storage modulus. We also show that it is possible to selectively anneal only a single component in the mixture.

Intertwined gababutin-based supramolecular double helix

A dimer-assembly driven supramolecular double helix is observed for the gababutin-based short peptide sequence and this architecture exhibits electrochemical features.

Tripeptide based super-organogelators: structure and function

The peptide based super-gelators are highly soluble in non-toxic organic solvent ethanol, the solution is easy to handle and just by spraying the ethanol solution over an oil–water mixture it is able to form an organogel at room temperature.

Aromatic identity, electronic substitution, and sequence in amphiphilic tripeptide self-assembly

The phenomenon of self-assembly in short peptides (2-4 amino acids) has been a source of curiosity, in part for its role in helping to better understand and predict how minimal sequences within proteins might contribute to the formation of larger structures or aggregates. Building on previous work in this field, here we investigate a family of amphiphilic tripeptides for their self-assembly and hydrogel formation. From a parent peptide, Ac-FID-NH2, which was previously shown to self-assemble into high aspect-ratio filaments and form hydrogels, we explored the significance of structural features or sequence variations on the observed self-assembly. This process entailed substituting key aromatic residues, altering the electronics of these aromatic drivers of assembly, and screening tripeptide constitutional isomers. This work more clearly elucidates the mechanisms and design parameters that govern the creation of materials from short peptide building blocks, as well as offering greater insight into the interactions between minimal segments of proteins that underlie their structure and aggregation.

Alkene-Azide 1,3-Dipolar Cycloaddition as a Trigger for Ultrashort Peptide Hydrogel Dissolution

An alkene-azide 1,3-dipolar cycloaddition between trans-cyclooctene (TCO) and an azide-capped hydrogel that promotes rapid gel dissolution is reported. Using an ultrashort aryl azide-capped peptide hydrogel (PhePhe), we have demonstrated proof-of-concept where upon reaction with TCO, the hydrogel undergoes a gel-sol transition via 1,2,3-triazoline degradation and 1,6-self-immolation of the generated aniline. The potential application of this as a general trigger in sustained drug delivery is demonstrated through release of encapsulated cargo (doxorubicin). Administration of TCO resulted in 87 % of the cargo being released in 10 h, compared to 13-14 % in the control gels. This is the first example of a potential bioorthogonal-triggered hydrogel dissolution using a traditional click-type reaction. This type of stimulus could be extended to other aryl azide-capped hydrogels.

Discotic Organic Gelators in Ion Sensing, Metallogel Formation, and Bioinspired Catalysis

Two organogelators G2 and G3 with a carboxamide group have been synthesized and characterized with different spectroscopic tools. Dimethylformamide or dimethyl sulfoxide solutions of both the compounds upon the addition of a minute quantity of water show the tendency to form gels. Supramolecular self-assembly for gel formation paves the way for aggregation-induced emission enhancement (AIEE) phenomena for both the gelator molecules. Introduction of metal ions in organogels strengthens the gel property without much affecting the fluorescence behavior. However, the introduction of Ag⁺, Fe²⁺, and Fe³⁺ ions in the G2 organogel separately results in total quenching of AIEE, making it possible to sense that particular cation in the gel state. The G3 organogel shows a similar behavior with the Fe²⁺ ion. Remarkably, other metallogels such as Ni(II)G2 and Co(II)G2 can sense sulfide ion and Cu(II)G2 can sense iodide ion by switching off the fluorescence even in multianalyte conditions. Furthermore, the copper-based metallogel Cu(II)G2 can be utilized as a catalyst and reaction medium for aerobic oxidation of catechol to quinone. To the best of our knowledge, this is the first attempt known so far to utilize a metallogel material for bioinspired catalysis such as catechol oxidation.

Targetable Mechanical Properties by Switching between Self-Sorting and Co-assembly with In Situ Formed Tripodal Ketoenamine Supramolecular Hydrogels

A new family of supramolecular hydrogelators are introduced in which self-sorting and co-assembly can be utilised in the tuneability of the mechanical properties of the materials, a property closely tied to the nanostructure of the gel network. The in situ reactivity of the components of the gelators allows for system chemistry concepts to be applied to the formation of the gels and shows that molecular properties, and not necessarily the chemical identity, determines some gel properties in these family of gels.

Construction of supramolecular hydrogels using photo-generated nitric oxide radicals

Photo-generated nitric oxide radicals (NO˙) derived from sodium nitroprusside dihydrate (SNP) are employed for the construction of supramolecular hydrogels based on an amino acid derivative precursor, N-fluorenylmethyloxycarbonyl tyrosine phosphate (FYP), which through dephosphorylation produces the gelator, N-fluorenylmethyloxycarbonyl tyrosine (FY). Self-assembly of the amphiphilic gelator yields high-aspect ratio nanofilaments that entangle to form self-supporting, viscoelastic hydrogels. The presence of photolyzed SNP yields periodically twisted nanofilaments with opposite chirality to filaments formed through conventional hydrogelation routes.

Scaffolds Formed via the Non-Equilibrium Supramolecular Assembly of the Synergistic ECM Peptides RGD and PHSRN Demonstrate Improved Cell Attachment in 3D

Self-assembling peptides (SAPs) are a relatively new class of low molecular weight gelators which immobilize their solvent through the spontaneous formation of (fibrillar) nanoarchitectures. As peptides are derived from proteins, these hydrogels are ideal for use as biocompatible scaffolds for regenerative medicine. Importantly, due to the propensity of peptide sequences to act as signals in nature, they are easily functionalized to be cell instructive via the inclusion of bioactive epitopes. In nature, the fibronectin peptide sequence, arginine-glycine-aspartic acid (RGD) synergistically promotes the integrin α₅β₁ mediated cell adhesion with another epitope, proline-histidine-serine-arginine-asparagine (PHSRN); however most functionalization strategies focus on RGD alone. Here, for the first time, we discuss the biomimetic inclusion of both these sequences within a self-assembled minimalistic peptide hydrogel. Here, based on our work with Fmoc-FRGDF (N-flourenylmethyloxycarbonyl phenylalanine-arginine-glycine-aspartic acid-phenylalanine), we show it is possible to present two epitopes simultaneously via the assembly of the epitopes by the coassembly of two SAPs, and compare this to the effectiveness of the signals in a single peptide; Fmoc-FRGDF: Fmoc-PHSRN (N-flourenylmethyloxycarbonyl-proline-histidine-serine-arginine-asparagine) and Fmoc-FRGDFPHSRN (N-flourenylmethyloxycarbonyl-phenylalanine-arginine-glycine-asparticacid-phenylalanine-proline-histidine-serine-arginine-asparagine). We show both produced self-supporting hydrogel underpinned by entangled nanofibrils, however, the stiffness of coassembled hydrogel was over two orders of magnitude higher than either Fmoc-FRGDF or Fmoc-FRGDFPHSRN alone. In-vitro three-dimensional cell culture of human mammary fibroblasts on the hydrogel mixed peptide showed dramatically improved adhesion, spreading and proliferation over Fmoc-FRGDF. However, the long peptide did not provide effective cell attachment. The results demonstrated the selective synergy effect of PHSRN with RGD is an effective way to augment the robustness and functionality of self-assembled bioscaffolds.