Sulfur- and Nitrogen-Containing Porous Donor–Acceptor Polymers as Real-Time Optical and Chemical Sensors

Recent Progress in Sulfur-Containing High Refractive Index Polymers for Optical Applications

The development in the field of high refractive index materials is a crucial factor for the advancement of optical devices with advanced features such as image sensors, optical data storage, antireflective coatings, light-emitting diodes, and nanoimprinting. Sulfur plays an important role in high refractive index applications owing to its high molar refraction compared to carbon. Sulfur exists in multiple oxidation states and can exhibit various stable functional groups. Over the last few decades, sulfur-containing polymers have attracted much attention owing to their wide array of applications governed by the functional group of sulfur present in the polymer repeat unit. The interplay of refractive index and various other polymer properties contributes to successfully implementing a specific polymer material in optical applications. The focus on developing optoelectronic devices induced an ever-increasing need to integrate different functional materials to achieve the devices' full potential. Several devices that see the potential use of sulfur in high refractive index materials are reviewed in the study. Like sulfur, selenium also exhibits high molar refraction and unique chemical properties, making it an essential field of study. This review covers the research and development in the field of sulfur and selenium in different forms of functionality, focusing on the chemistry of bonding and the optical properties of the polymers containing the heteroatoms mentioned above. The strategy and rationale behind incorporating heteroatoms in a polymer matrix to produce high-refractive-index materials are also described in the present review.

Synthesis of Naphthalimide Derivatives and Their Luminescence upon Complexation with Cucurbit[n]uril Hosts

A series of naphthalimide derivatives are synthesized and their binding behavior upon complexation with cucurbit[n]urils (CB[n]s) has been investigated. With a heavy atom (bromine) on the naphthalimide core, 4-bromo-1,8-naphthalimide derivatives 1-4 show short room-temperature phosphorescence (RTP) lifetimes with low quantum yields. Their RTP properties are significantly enhanced in the presence of CB[8] or CB[10] both in aqueous solution and solid state owing to the efficient suppression of nonradiative decay and isolation of quenching factors by the rigid cavity of CB[n]. Without the bromine atom, 1,8-naphthalimide derivatives 5 and 6 show strong excimer emission upon complexation with CB[10] accompanied by fluorescence transition from blue to cyan. The fluorescence colors of 4-(dimethylamino)-1,8-naphthalimide derivatives 7 and 8 change from blue to white to yellow with the addition of CB[n]. This host-guest complexation strategy to modulate the luminescence of the luminophore would further broaden the application of luminescent materials.

Solution-processable polymers of intrinsic microporosity for gas-phase carbon dioxide photoreduction

Four solution-processable, linear conjugated polymers of intrinsic porosity are synthesised and tested for gas phase carbon dioxide photoreduction. The polymers' photoreduction efficiency is investigated as a function of their porosity, optical properties, energy levels and photoluminescence. All polymers successfully form carbon monoxide as the main product, without the addition of metal co-catalysts. The best performing single component polymer yields a rate of 66 μmol h^-1 m^-2, which we attribute to the polymer exhibiting macroporosity and the longest exciton lifetimes. The addition of copper iodide, as a source of a copper co-catalyst in the polymers shows an increase in rate, with the best performing polymer achieving a rate of 175 μmol h^-1 m^-2. The polymers are active for over 100 h under operating conditions. This work shows the potential of processable polymers of intrinsic porosity for use in the gas phase photoreduction of carbon dioxide towards solar fuels.

Design and Fabrication of Ultrathin Nanoporous Donor-Acceptor Copolymer-Based Organic Field-Effect Transistors for Enhanced VOC Sensing Performance

The development of organic field-effect transistor (OFET) chemical sensors with high sensing performance and good air stability has remained a persistent challenge, thereby hindering their practical application. Herein, an OFET sensor based on a donor-acceptor copolymer is shown to provide high responsivity, sensitivity, and selectivity toward polar volatile organic compounds, as well as good air stability. In detail, a polymer blend of N-alkyl-diketopyrrolo-pyrrole-dithienylthieno[3,2-b]thiophene (DPP-DTT) and polystyrene is coated onto an FET substrate via shearing-assisted phase separation (SAPS) combined with selective solvent etching to fabricate the DPP-DTT-based OFET device having an ultrathin nanoporous structure suitable for gas sensing applications. This is achieved via optimization of the film morphology by varying the shear rate to adjust the dynamic balance between the shear and capillary forces to obtain an ultrathin thickness (∼8 nm) and nanopore size (80 nm) that are favorable for the efficient diffusion and interaction of analytes with the active layer. In particular, the sensor presents high responsivities toward methanol (∼70%), acetone (∼51.3%), ethanol (∼39%), and isopropyl alcohol (IPA) (∼29.8%), along with fast response and recovery times of ∼80 and 234 s, respectively. Moreover, the average sensitivity was determined to be 5.75%/ppm from the linear plot of the responsivity against the methanol concentration in the range of 1-100 ppm. Importantly, the device also exhibits excellent long-term (30-day) air and thermal storage stability, thereby demonstrating its high potential for practical applications.

Nickel-Catalyzed Direct Arylation Polymerization for the Synthesis of Thiophene-Based Cross-linked Polymers

An earth-abundant nickel(II) bipyridine catalyst, combined with lithium hexamethyldisilazide as base, demonstrates its wide applicability in the direct arylation polymerization of di- and tri-thiophene heteroaryls with poly(hetero)aryl halides. With a nickel catalyst loading of 2.5 mol%, a series of twenty highly cross-linked organic polymers is obtained in 34 to 99 % yields. Using mixed polytopic coupling partners allows obtaining alternating and optically active thiophene-based solids with intrinsic porosity.

Ultramicroporous Organophosphorus Polymers via Self-Accelerating P-C Coupling Reactions: Kinetic Effects on Crosslinking Environments and Porous Structures

Porous organic polymers (POPs) have drawn significant attention in diverse applications. However, factors affecting the heterogeneous polymerization and porosity of POPs are still not well understood. Herein, we report a new strategy to construct porous organophosphorus polymers (POPPs) with high surface areas (1283 m²/g) and ultramicroporous structures (0.67 nm). The strategy harnesses an efficient transition-metal-catalyzed phosphorus-carbon (P-C) coupling reaction at the trigonal pyramidal P-center, which is distinct from the typical carbon-carbon coupling reaction utilized in the synthesis of POPs. As the first kinetic study on the coupling reaction of POPs, we uncovered a self-accelerating reaction characteristic, which is controlled by the choice of bases and catalysts. The self-accelerating characteristic of the P-C coupling reaction is beneficial for the high surface area and uniform ultramicroporosity of POPPs. The direct crosslinking of the P-centers allows ³¹P solid-state (ss)NMR experiments to unambiguously reveal the crosslinking environments of POPPs. Leveraging on the kinetic studies and ³¹P ssNMR studies, we were able to reveal the kinetic effects of the P-C coupling reaction on both the crosslinking environments and the porous structures of POPPs. Furthermore, our studies show that the CO₂ uptake capacity of POPPs is highly dependent on their porous structures. Overall, our studies paves the way to design new POPs with better controlled chemical and ultramicroporous structures, which have potential applications for CO₂ capture and separation.

Recent Progress in External-Stimulus-Responsive 2D Covalent Organic Frameworks

Recently, smart 2D covalent organic frameworks (COFs), combining the advantages of both inherent structure features and functional building blocks, have been demonstrated to show reversible changes in conformation, color, and luminescence in response to external stimuli. This review provides a summary on the recent progress of 2D COFs that are responsive to external stimuli such as metal ions, gas molecules, pH values, temperature, electricity, light, etc. Moreover, the responsive mechanisms and design strategies, along with the applications of these stimulus-responsive 2D COFs in chemical sensors and photoelectronic devices are also discussed. It is believed that this review would provide some guidelines for designing novel single-/multistimulus-responsive 2D COFs with controllable responsive behaviors for advanced photoelectronic applications.

Covalent organic framework-based fluorescent nanoprobe for intracellular pH sensing and imaging

Lysosomes are the acidic organelles in the cells that play an important role in intracellular degradation and other various cellular functions. The pH disturbance of lysosomes will result in the lysosomal dysfunction and many lysosomal related diseases. In this work, we reported a methoxy-based covalent organic framework (TAPB-DMTP-COF) that a novel pH-responsive fluorescent probe for lysosomal pH imaging in cells. The prepared TAPB-DMTP-COF presented regular crystal structure, low toxicity and good pH responsive property. The rich imine structure in the material enabled pH-responsive properties of the TAPB-DMTP-COF and made it exhibited pH-dependent fluorescence response. Good detection linearity for pH measurements in aqueous solution was achieved by this probe. Moreover, the TAPB-DMTP-COF can be used for the selective lysosomal pH imaging. Confocal fluorescence imaging results demonstrated that the pH fluctuations (from 4.0 to 7.4) and the pH changes in lysosomes can be effectively monitored in situ by the developed probe. This study may provide a new avenue for the intracellular pH sensing, deep study and understanding about the mechanism of diseases related to abnormal lysosomal pH.

Fully Conjugated Tetraoxa[8]circulene-Based Porous Semiconducting Polymers

Tetraoxa[8]circulenes (TOCs) are a class of hetero[8]circulenes featuring a planar cyclooctatetraene core with a mixed aromatic/antiaromatic motif that governs their electronic properties. Polymeric TOCs (pTOCs) have been the subject of several computational simulations because they are predicted to be low-band-gap semiconductors, but they have not been available synthetically yet. Here, we report the first example of pTOCs, a new family of porous semiconductors, synthesized under ionothermal conditions through the intermolecular cyclization of 1,4,5,8-anthracene tetrone. pTOCs are porous, with surface areas up to 1656 m²  g^-1 , and exhibit light-switchable and tunable semiconducting properties.

Conjugated microporous organic polymer as fluorescent chemosensor for detection of Fe3+ and Fe2+ ions with high selectivity and sensitivity

A conjugated microporous organic polymer (TPA-Bp) comprised of triphenylamine (TPA) and 2,2'-bipyridine-5,5'-diformaldehyde (Bp) was prepared via the Schiff-base reaction under ambient conditions. TPA-Bp is an amorphous and microporous spherical nanoparticle with very high stability. TPA-Bp suspension in DMF displayed strong fluorescence emission and selective fluorescence quenching response towards Fe³⁺ and Fe²⁺ ions. The fluorescence intensity of TPA-Bp at 331 nm presents linear relationship with the concentrations of both Fe³⁺ and Fe²⁺ with low detection limits of 1.02 × 10^-5 M for Fe³⁺ and 5.37 × 10^-6 M for Fe²⁺. The results of X-ray photoelectron spectroscopy (XPS) and Fourier Transform infrared spectroscopy (FTIR) confirm the selective coordination of N atoms of pyridine unit with Fe ions. The fluorescence quenching of TPA-Bp upon the addition of Fe³⁺/Fe²⁺ ions can be attributed to the absorption competition quenching (ACQ) mechanism and the energy transfer between TPA-Bp and Fe³⁺/Fe²⁺ ions. This work demonstrates that the conjugated microporous polymers are promising candidates as luminescent sensor for detection of the special analytes in practical applications.

Hybrid Inorganic-Organic Visible-Light-Driven Microrobots Based on Donor-Acceptor Organic Polymer for Degradation of Toxic Psychoactive Substances

Light-driven microrobots based on organic semiconductors have received tremendous attention in the past few years due to their unique properties, such as ease of reactivity tunability, band-gap modulation, and low cost. However, their fabrication with defined morphologies is a very challenging task that results in amorphous microrobots with poor motion efficiencies. Herein, we present hybrid inorganic-organic photoactive microrobots with a tubular shape and based on the combination of a mesoporous silica template with an active polymer containing thiophene and triazine units (named as Tz-Th microrobots). Owing to their well-defined tubular structure, such Tz-Th microrobots showed efficient directional motion under fuel-free conditions. Depending on the accumulation of the polymer coating, these microdevices also exhibited stand-up and rotation motion. As a proof-of-concept, we use these hybrid microrobots for the capture and degradation of toxic psychoactive drugs commonly found in wastewater effluents such as methamphetamine derivatives. We found that the microrobots were able to decompose the drug into small organic fragments after 20 min of visible light irradiation, reaching total intermediates removal after 2 h. Therefore, this approach represents a versatile and low-cost strategy to fabricate structured organic microrobots with efficient directional motion by using inorganic materials as the robot chassis, thereby maintaining the superior photocatalytic performance usually associated with such organic polymers.

Direct growth of crystalline triazine-based graphdiyne using surface-assisted deprotection-polymerisation

Graphdiyne polymers have interesting electronic properties due to their π-conjugated structure and modular composition. Most of the known synthetic pathways for graphdiyne polymers yield amorphous solids because the irreversible formation of carbon–carbon bonds proceeds under kinetic control and because of defects introduced by the inherent chemical lability of terminal alkyne bonds in the monomers. Here, we present a one-pot surface-assisted deprotection/polymerisation protocol for the synthesis of crystalline graphdiynes over a copper surface starting with stable trimethylsilylated alkyne monomers. In comparison to conventional polymerisation protocols, our method yields large-area crystalline thin graphdiyne films and, at the same time, minimises detrimental effects on the monomers like oxidation or cyclotrimerisation side reactions typically associated with terminal alkynes. A detailed study of the reaction mechanism reveals that the deprotection and polymerisation of the monomer is promoted by Cu(ii) oxide/hydroxide species on the as-received copper surface. These findings pave the way for the scalable synthesis of crystalline graphdiyne-based materials as cohesive thin films.

We present a one-pot deprotection/polymerisation protocol for the synthesis of crystalline graphdiynes on top of a copper surface starting with stable trimethylsilylated alkyne monomers.

Development of structurally extended benzosiloxaboroles - synthesis and in vitro biological evaluation

The synthesis of potassium 6-hydroxy-7-chloro-1,1-dimethyl-3,3-difluorobenzo-1,2,3-siloxaborolate 5b from readily available 4-bromo-2-chlorophenol was developed. This compound proved useful in various derivatizations resulting in a wide range of O-functionalized benzosiloxaboroles. Reactions of 5b with selected substituted benzoyl chlorides gave rise to a series of respective derivatives with 6-benzoate side groups attached to the benzosiloxaborole core. Furthermore, treatment of 5b with substituted benzenesufonyl chlorides afforded several benzosiloxaboroles bearing functionalized benzenesulfonate moieties at the 6 position. The synthesis of related chloropyridine-2-yloxy substituted benzosiloxaboroles was accomplished by a standard approach involving silylation/boronation of appropriate heterodiaryl ethers. Investigation of biological activity of obtained compounds revealed that some benzoate and most benzenesulfonate derivatives exhibit high activity against Gram-positive cocci such as methicillin-sensitive Staphylococcus aureus ATCC 6538P as well as methicillin-resistant S. aureus ATCC 43300 with the MIC values in the range of 0.39–3.12 mg L⁻¹. Some benzenesulfonate derivatives showed also potent activity against Enterococcus faecalis ATCC 29212 and E. faecium ATCC 6057 with MIC = 6.25 mg L⁻¹. Importantly, for the most promising cocci-active benzenesulfonate derivatives the obtained MIC values were far below the cytotoxicity limit determined with respect to human normal lung fibroblasts (MRC-5). For those derivatives, the obtained IC₅₀ values were higher than 12.3 mg L⁻¹. The results of antimicrobial activity and cytotoxicity indicate that the tested compounds can be considered as potential antibacterial agents.

The synthesis of potassium 6-hydroxy-7-chloro-1,1-dimethyl-3,3-difluorobenzo-1,2,3-siloxaborolate 5b from readily available 4-bromo-2-chlorophenol was developed.

The Prospect of Dimensionality in Porous Semiconductors

With the advent of silicon-based semiconductors, a plethora of previously unknown technologies became possible. The development of lightweight low-dimensional organic semiconductors followed soon after. However, the efficient charge/electron transfers enabled by the non-porous 3D structure of silicon is rather challenging to be realized by their (metal-)organic counterparts. Nevertheless, the demand for lighter, more efficient semiconductors is steadily increasing resulting in a growing interest in (metal-)organic semiconductors. These novel materials are faced with a variety of challenges originating from their chemical design, their packing and crystallinity. Although the effect of molecular design is quite well understood, the influence of dimensionality and the associated change in properties (porosity, packing, conjugation) is still an uncharted area in (metal-)organic semiconductors, yet highly important for their practical utilization. In this Minireview, an overview on the design and synthesis of porous semiconductors, with a particular emphasis on organic semiconductors, is presented and the influence of dimensionality is discussed.

An Optical Chiral Sensor Based on Weak Measurement for the Real-Time Monitoring of Sucrose Hydrolysis

A chiral sensor with optical rotation detection based on weak measurement for the kinetic study of sucrose hydrolysis is presented. Based on the polarization modulation to the pre-selection state, the optical rotation of chiral sample was accurately determined through the central wavelength shift of the output spectrum. With this approach, the concentration response curves of sucrose and its hydrolysis products, i.e., fructose and glucose, were experimentally obtained for the hydrolysis analysis. By collecting the output spectrum with a frequency of 100 Hz and fitting the central wavelength shift synchronously during the measurement, the sucrose hydrolysis process was monitored in real time. Different hydrolysis conditions with varied concentration of invertase enzyme and citrate were implemented in this work. As a consequence, the real-time hydrolysis curves of the hydrolysis process with distinct velocities was achieved and analyzed. Such a kinetic monitoring about sucrose hydrolysis with optical rotation detection technology played a critical role in the researches involving sucrose, and also revealed the great potential of weak measurement in intersections, such as food safety inspection and chemical analysis.