Effects of Chemical Conjugation of l-Leucine to Chitosan on Dispersibility and Controlled Release of Drug from a Nanoparticulate Dry Powder Inhaler Formulation

Enhanced fabrication of size-controllable chitosan-genipin nanoparticles using orifice-induced hydrodynamic cavitation: Process optimization and performance evaluation

Chitosan nanoparticles (NPs) possess great potential in biomedical fields. Orifice-induced hydrodynamic cavitation (HC) has been used for the enhancement of fabrication of size-controllable genipin-crosslinked chitosan (chitosan-genipin) NPs based on the emulsion cross-linking (ECLK). Experiments have been performed using various plate geometries, chitosan molecular weight and under different operational parameters such as inlet pressure (1-3.5 bar), outlet pressure (0-1.5 bar) and cross-linking temperature (40-70 °C). Orifice plate geometry was a crucial factor affecting the properties of NPs, and the optimized geometry of orifice plate was with single hole of 3.0 mm diameter. The size of NPs with polydispersity index of 0.359 was 312.6 nm at an optimized inlet pressure of 3.0 bar, and the maximum production yield reached 84.82 %. Chitosan with too high or too low initial molecular weight (e.g., chitosan oligosaccharide) was not applicable for producing ultra-fine and narrow-distributed NPs. There existed a non-linear monotonically-increasing relationship between cavitation number (Cv) and chitosan NP size. Scanning electron microscopy (SEM) test indicated that the prepared NPs were discrete with spherical shape. The study demonstrated the superiority of HC in reducing particle size and size distribution of NPs, and the energy efficiency of orifice type HC-processed ECLK was two orders of magnitude than that of ultrasonic horn or high shear homogenization-processed ECLK. In vitro drug-release studies showed that the fabricated NPs had great potential as a drug delivery system. The observations of this study can offer strong support for HC to enhance the fabrication of size-controllable chitosan-genipin NPs.

Excipients for Novel Inhaled Dosage Forms: An Overview

Pulmonary drug delivery is a form of local targeting to the lungs in patients with respiratory disorders like cystic fibrosis, pulmonary arterial hypertension (PAH), asthma, chronic pulmonary infections, and lung cancer. In addition, noninvasive pulmonary delivery also presents an attractive alternative to systemically administered therapeutics, not only for localized respiratory disorders but also for systemic absorption. Pulmonary delivery offers the advantages of a relatively low dose, low incidence of systemic side effects, and rapid onset of action for some drugs compared to other systemic administration routes. While promising, inhaled delivery of therapeutics is often complex owing to factors encompassing mechanical barriers, chemical barriers, selection of inhalation device, and limited choice of dosage form excipients. There are very few excipients that are approved by the FDA for use in developing inhaled drug products. Depending upon the dosage form, and inhalation devices such as pMDIs, DPIs, and nebulizers, different excipients can be used to provide physical and chemical stability and to deliver the dose efficiently to the lungs. This review article focuses on discussing a variety of excipients that have been used in novel inhaled dosage forms as well as inhalation devices.

Bioinspired Amino Acid Based Materials in Bionanotechnology: From Minimalistic Building Blocks and Assembly Mechanism to Applications

Inspired by natural hierarchical self-assembly of proteins and peptides, amino acids, as the basic building units, have been shown to self-assemble to form highly ordered structures through supramolecular interactions. The fabrication of functional biomaterials comprised of extremely simple biomolecules has gained increasing interest due to the advantages of biocompatibility, easy functionalization, and structural modularity. In particular, amino acid based assemblies have shown attractive physical characteristics for various bionanotechnology applications. Herein, we propose a review paper to summarize the design strategies as well as research advances of amino acid based supramolecular assemblies as smart functional materials. We first briefly introduce bioinspired reductionist design strategies and assembly mechanism for amino acid based molecular assembly materials through noncovalent interactions in condensed states, including self-assembly, metal ion mediated coordination assembly, and coassembly. In the following part, we provide an overview of the properties and functions of amino acid based materials toward applications in nanotechnology and biomedicine. Finally, we give an overview of the remaining challenges and future perspectives on the fabrication of amino acid based supramolecular biomaterials with desired properties. We believe that this review will promote the prosperous development of innovative bioinspired functional materials formed by minimalistic building blocks.

Engineering of inhalable nano-in-microparticles for co-delivery of small molecules and miRNAs

In this study, novel Trojan particles were engineered for direct delivery of doxorubicin (DOX) and miR-34a as model drugs to the lungs to raise local drug concentration, decrease pulmonary clearance, increase lung drug deposition, reduce systemic side effects, and overcome multi-drug resistance. For this purpose, targeted polyelectrolyte nanoparticles (tPENs) developed with layer-by-layer polymers (i.e., chitosan, dextran sulfate, and mannose-g-polyethyleneimine) were spray dried into a multiple-excipient (i.e., chitosan, leucine, and mannitol). The resulting nanoparticles were first characterized in terms of size, morphology, in vitro DOX release, cellular internalization, and in vitro cytotoxicity. tPENs showed comparable cellular uptake levels to PENs in A549 cells and no significant cytotoxicity on their metabolic activity. Co-loaded DOX/miR-34a showed a greater cytotoxicity effect than DOX-loaded tPENs and free drugs, which was confirmed by Actin staining. Thereafter, nano-in-microparticles were studied through size, morphology, aerosolization efficiency, residual moisture content, and in vitro DOX release. It was demonstrated that tPENs were successfully incorporated into microspheres with adequate emitted dose and fine particle fraction but low mass median aerodynamic diameter for deposition into the deep lung. The dry powder formulations also demonstrated a sustained DOX release at both pH values of 6.8 and 7.4.

Impact of Leucine and Magnesium Stearate on the Physicochemical Properties and Aerosolization Behavior of Wet Milled Inhalable Ibuprofen Microparticles for Developing Dry Powder Inhaler Formulation

This study investigated the development and characterization of leucine and magnesium stearate (MgSt) embedded wet milled inhalable ibuprofen (IBF) dry powder inhaler (DPI) formulations. IBF microparticles were prepared by a wet milling homogenization process and were characterized by SEM, FTIR, DSC, XRD and TGA. Using a Twin-Stage Impinger (TSI), the in vitro aerosolization of the formulations with and without carrier lactose was studied at a flow rate of 60± 5 L/min and the IBF was determined using a validated HPLC method. The flow properties were determined by the Carr's Index (CI), Hausner Ratio (HR) and Angle of Repose (AR) of the milled IBF with 4-6.25% leucine and leucine containing formulations showed higher flow property than those of formulations without leucine. The fine particle fraction (FPF) of IBF from the prepared formulations was significantly (p = 0.000278) higher (37.1 ± 3.8%) compared to the original drug (FPF 3.7 ± 0.9%) owing to the presence of leucine, which enhanced the aerosolization of the milled IBF particles. Using quantitative phase analysis, the XPRD data revealed the crystallinity and accurate weight percentages of the milled IBF in the formulations. FTIR revealed no changes of the structural integrity of the milled IBF in presence of leucine or MgSt. The presence of 2.5% MgSt in the selected formulations produced the highest solubility (252.8 ± 0.6 µg/mL) of IBF compared to that of unmilled IBF (147.4 ± 1.6 µg/mL). The drug dissolution from all formulations containing 4-6.25% leucine showed 12.2-18.6% drug release in 2.5 min; however, 100% IBF dissolution occurred in 2 h whereas around 50% original and dry milled IBF dissolved in 2 h. The results indicated the successful preparation of inhalable IBF microparticles by the wet milling method and the developed DPI formulations with enhanced aerosolization and solubility due to the presence of leucine may be considered as future IBF formulations for inhalation.

Synthesis, Characterization and In Vitro Evaluation of Chitosan Nanoparticles Physically Admixed with Lactose Microspheres for Pulmonary Delivery of Montelukast

This study aimed to synthesise montelukast-loaded polymeric nanoparticles via the ionic gelation method using chitosan as a natural polymer and tripolyphosphate as a crosslinking agent. Tween 80, hyaluronic acid and leucine were added to modify the physicochemical properties of nanoparticles, reduce the nanoparticles’ uptake by alveolar macrophages and improve powder aerosolisation, respectively. The nanoparticles ranged from 220 nm to 383 nm with a polydispersity index of ≤0.50. The zeta potential of nanoparticles ranged from 11 mV to 22 mV, with a drug association efficiency of 46–86%. The simple chitosan nanoparticles (F2) were more spherical in comparison to other formulations (F4–F6), while the roughness of hyaluronic acid (F5) and leucine (F6) added formulations was significantly high er than F2 and Tween 80 added formulation (F4). The DSC and FTIR analysis depict that the physical and chemical properties of the drug were preserved. The release of the drugs from nanoparticles was more sustained in the case of F5 and F6 when compared to F2 and F4 due to the additional coating of hyaluronic acid and leucine. The nanoparticles were amorphous and cohesive and prone to exhalation due to their small size. Therefore, nanoparticles were admixed with lactose microspheres to reduce particle agglomeration and improve powder dispersion from a dry powder inhaler (DPI). The DPI formulations achieved a dispersed fraction of 75 to 90%, a mass median aerodynamic diameter (MMAD) of 1–2 µm and a fine particle fraction (FPF) of 28–83% when evaluated using the Anderson cascade impactor from Handihaler®. Overall, the montelukast-loaded nanoparticles physically admixed with lactose microspheres achieved optimum deposition in the deep lung for potential application in asthmatic patients.

Self-assembly of amphiphilic amino acid derivatives for biomedical applications

Amino acids are one of the simplest biomolecules and they play an essential role in many biological processes. They have been extensively used as building blocks for the synthesis of functional nanomaterials, thanks to their self-assembly capacity. In particular, amphiphilic amino acid derivatives can be designed to enrich the diversity of amino acid-based building blocks, endowing them with specific properties and/or promoting self-assembly through hydrophobic interactions, hydrogen bonding, and/or π-stacking. In this review, we focus on the design of various amphiphilic amino acid derivatives able to self-assemble into different types of nanostructures that were exploited for biomedical applications, thanks to their excellent biocompatibility and biodegradability.

Drug release study of the chitosan-based nanoparticles

Recently, multifunctional drug delivery systems (DDSs) have been designed to provide a comprehensive approach with multiple functionalities, including diagnostic imaging, targeted drug delivery, and controlled drug release. Chitosan-based drug nanoparticles (CSNPs) systems are employed as diagnostic imaging and delivering the drug to particular targeted sites in a regulated manner. Drug release is an important factor in ensuring high reproducibility, stability, quality control of CSNPs, and scientific-based for developing CSNPs. Several factors influence drug release from CSNPs, including composition, composition ratio, ingredient interactions, and preparation methods. Early, CSNPs were used for improving drug solubility, stability, pharmacokinetics, and pharmacotherapeutics properties. Chitosan has been developed toward a multifunctional drug delivery system by exploring positively charged properties and modifiable functional groups. Various modifications to the polymer backbone, charge, or functional groups will undoubtedly affect the drug release from CSNPs. The drug release from CSNPs has a significant influence on its therapeutic actions. Our review's objective was to summarize and discuss the relationship between the modification in CSNPs as multifunctional delivery systems and drug release properties and kinetics of the drug release model. Kinetic models help describe the release rate, leading to increased efficiency, accuracy, the safety of the dose, optimizing the drug delivery device's design, evaluating the drug release rate, and improvement of patient compatibility. In conclusion, almost all CSNPs showed bi-phasic release, initial burst release drug in a particular time followed controlled manner release in achieving the expected release, stimuli external can be applied. CSNPs are a promising technique for multifunctional drug delivery systems.

Inhaled ciprofloxacin-loaded poly(2-ethyl-2-oxazoline) nanoparticles from dry powder inhaler formulation for the potential treatment of lower respiratory tract infections

Lower respiratory tract infections (LRTIs) are one of the fatal diseases of the lungs that have severe impacts on public health and the global economy. The currently available antibiotics administered orally for the treatment of LRTIs need high doses with frequent administration and cause dose-related adverse effects. To overcome this problem, we investigated the development of ciprofloxacin (CIP) loaded poly(2-ethyl-2-oxazoline) (PEtOx) nanoparticles (NPs) for potential pulmonary delivery from dry powder inhaler (DPI) formulations against LRTIs. NPs were prepared using a straightforward co-assembly reaction carried out by the intermolecular hydrogen bonding among PEtOx, tannic acid (TA), and CIP. The prepared NPs were characterized by scanning electron microscopy (SEM), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction analysis (PXRD), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The CIP was determined by validated HPLC and UV spectrophotometry methods. The CIP loading into the PEtOx was between 21-67% and increased loading was observed with the increasing concentration of CIP. The NP sizes of PEtOx with or without drug loading were between 196-350 nm and increased with increasing drug loading. The in vitro CIP release showed the maximum cumulative release of about 78% in 168 h with a burst release of 50% in the first 12 h. The kinetics of CIP release from NPs followed non-Fickian or anomalous transport thus suggesting the drug release was regulated by both diffusion and polymer degradation. The in vitro aerosolization study carried out using a Twin Stage Impinger (TSI) at 60 L/min air flow showed the fine particle fraction (FPF) between 34.4% and 40.8%. The FPF was increased with increased drug loading. The outcome of this study revealed the potential of the polymer PEtOx as a carrier for developing CIP-loaded PEtOx NPs as DPI formulation for pulmonary delivery against LRTIs.

Inhaled antibiotic-loaded polymeric nanoparticles for the management of lower respiratory tract infections

Lower respiratory tract infections (LRTIs) are one of the leading causes of deaths in the world. Currently available treatment for this disease is with high doses of antibiotics which need to be administered frequently. Instead, pulmonary delivery of drugs has been considered as one of the most efficient routes of drug delivery to the targeted areas as it provides rapid onset of action, direct deposition of drugs into the lungs, and better therapeutic effects at low doses and is self-administrable by the patients. Thus, there is a need for scientists to design more convenient pulmonary drug delivery systems towards the innovation of a novel treatment system for LRTIs. Drug-encapsulating polymer nanoparticles have been investigated for lung delivery which could significantly reduce the limitations of the currently available treatment system for LRTIs. However, the selection of an appropriate polymer carrier for the drugs is a critical issue for the successful formulations of inhalable nanoparticles. In this review, the current understanding of LRTIs, management systems for this disease and their limitations, pulmonary drug delivery systems and the challenges of drug delivery through the pulmonary route are discussed. Drug-encapsulating polymer nanoparticles for lung delivery, antibiotics used in pulmonary delivery and drug encapsulation techniques have also been reviewed. A strong emphasis is placed on the impact of drug delivery into the infected lungs.

Poly(δ-valerolactone-co-allyl-δ-valerolactone) cross-linked microparticles: Formulation, characterization and biocompatibility

A novel polymeric material, poly(δ-valerolactone-co-allyl-δ-valerolactone) (PVL-co-PAVL), was used to manufacture microparticles (MPs) for sustained drug delivery. PVL-co-PAVL MPs were formulated using a modified oil-in-water approach, followed by a UV-initiated cross-linking process. Prepared MPs had a smooth spherical morphology and cross-linking of the copolymer was found to improve the integrity and thermal stability of the MPs. Paclitaxel (PTX) was successfully loaded into the MPs at a high drug loading capacity, using a post-loading swelling-equilibrium method. In vitro evaluation showed that the PVL-co-PAVL MPs provide sustained release of PTX, which exhibited first-order release kinetics. A subsequent pilot pharmacokinetic study was carried out on the PTX-loaded PVL-co-PAVL MPs. During this study, serum levels of PTX were monitored following subcutaneous administration of the MPs to Sprague-Dawley rats. Overall, the in vivo release of PTX from the MPs was lower than expected based on the in vitro release studies. Detectable serum levels of PTX suggest that sustained release of drug was achieved in vivo. Minimal changes in subcutaneous tissue were observed at the site of injection. Future studies will further examine the localized and systemic distribution of drug following administration in this new polymer-based MP system.

A new and efficient carboxymethyl-hexanoyl chitosan/dodecyl sulfate nanocarrier for a pyrazoline with antileukemic activity

We describe herein a chitosan nanocarrier for drug delivery applications obtained through the self-assembly of carboxymethyl-hexanoyl chitosan and dodecyl sulfate (CHC-SDS). Nanocapsules with spherical morphology were obtained in phosphate buffer at pH 7.4. These CHC-SDS nanocapsules showed no toxicity toward Jurkat cells (acute lymphoblastic leukemia) and were used to encapsulate a new pyrazoline (H3TM04) with antileukemia activity. The samples were characterized by dynamic light scattering (DLS) and Laser Doppler Micro-Electrophoresis. The encapsulation efficiency was higher than 96% (293.6 μg mL^-1) and the H3TM04-loaded nanocapsules (CHC-SDS-H) had a negative surface charge (-29.8 ± 0.7 mV) and hydrodynamic radius of around 84 nm. For the first time, CHC-SDS-H were formed and the antitumoral cancer activity was proved. The in vitro assays showed the controlled release of H3TM04 from the CHC-SDS-H nanocapsules in phosphate buffer pH 7.4. The H3TM04 release data were described by the power law model, indicating that H3TM04 delivery occurred via an erosion mechanism. The cytotoxicity assays with Jurkat and K-562 cells (acute myeloid leukemia) demonstrated that the CHC-SDS-H nanocapsule decreases the half maximal inhibitory concentration (IC₅₀). The study showed that CHC-SDS nanocapsules represent a promising nanocarrier for pyrazoline derivates that could be applied in leukemia therapy.

Degradability of chitosan micro/nanoparticles for pulmonary drug delivery

Chitosan, a natural carbohydrate polymer, has long been investigated for drug delivery and medical applications due to its biodegradability, biocompatibility and low toxicity. The micro/nanoparticulate forms of chitosan are reported to enhance the efficiency of drug delivery with better physicochemical properties including improved solubility and bioavailability. This polymer is known to be biodegradable and biocompatible; however, crosslinked chitosan particles may not be biodegradable. Crosslinkers (e.g., tripolyphosphate and glutaraldehyde) are needed for efficient micro/nanoparticle formation, but it is not clear whether the resultant particles are biodegradable or able to release the encapsulated drug fully. To date, no studies have conclusively demonstrated the complete biodegradation or elimination of chitosan nanoparticles in vivo. Herein we review the synthesis and degradation mechanisms of chitosan micro/nanoparticles frequently used in drug delivery especially in pulmonary drug delivery to understand whether these nanoparticles are biodegradable.

Excipient Interactions in Glucagon Dry Powder Inhaler Formulation for Pulmonary Delivery

PURPOSE

This study describes the development and characterization of glucagon dry powder inhaler (DPI) formulation for pulmonary delivery. Lactose monohydrate, as a carrier, and L-leucine and magnesium stearate (MgSt) were used as dispersibility enhancers for this formulation.

METHODS

Using Fourier-transform infrared (FTIR) spectroscopy, Differential Scanning Calorimetry (DSC), and Raman confocal microscopy, the interactions between glucagon and all excipients were characterized. The fine particle fractions (FPFs) of glucagon in different formulations were determined by a twin stage impinger (TSI) using a 2.5% glucagon mixture, and the glucagon concentration was measured by a validated LC-MS/MS method.

RESULTS

The FPF of the glucagon was 6.4%, which increased six-fold from the formulations with excipients. The highest FPF (36%) was observed for the formulation containing MgSt and large carrier lactose. The FTIR, Raman, and DSC data showed remarkable physical interactions of glucagon with leucine and a minor interaction with lactose; however, there were no interactions with MgSt alone or mixed with lactose.

CONCLUSION

Due to the interaction between L-leucine and glucagon, leucine was not a suitable excipient for glucagon formulation. In contrast, the use of lactose and MgSt could be considered to prepare an efficient DPI formulation for the pulmonary delivery of glucagon.

In Vitro Enzymatic Digestibility of Glutaraldehyde-Crosslinked Chitosan Nanoparticles in Lysozyme Solution and Their Applicability in Pulmonary Drug Delivery

Herein, the degradation of low molecular weight chitosan (CS), with 92% degree of deacetylation (DD), and its nanoparticles (NP) has been investigated in 0.2 mg/mL lysozyme solution at 37 °C. The CS nanoparticles were prepared using glutaraldehyde crosslinking of chitosan in a water-in-oil emulsion system. The morphological characterization of CS particles was carried out using scanning electron microscopy (SEM) and Transmission Electron Microscopy (TEM) techniques. Using attenuated total reflectance Fourier transform infrared (ATR-FTIR) and UV-VIS spectroscopy, the structural integrity of CS and its NPs in lysozyme solution were monitored. The CS powder showed characteristic FTIR bands around 1150 cm⁻¹ associated with the glycosidic bridges (C-O-C bonds) before and after lysozyme treatment for 10 weeks, which indicated no CS degradation. The glutaraldehyde crosslinked CS NPs showed very weak bands associated with the glycosidic bonds in lysozyme solution. Interestingly, the UV-VIS spectroscopic data showed some degradation of CS NPs in lysozyme solution. The results of this study indicate that CS with a high DD and its NPs crosslinked with glutaraldehyde were not degradable in lysozyme solution and thus unsuitable for pulmonary drug delivery. Further studies are warranted to understand the complete degradation of CS and its NPs to ensure their application in pulmonary drug delivery.

Preparation of Ibuprofen Microparticles by Antisolvent Precipitation Crystallization Technique: Characterization, Formulation, and In Vitro Performance

This study demonstrates the preparation and characterization of ibuprofen (IBP) microparticles with some excipients by a controlled crystallization technique with improved dissolution performance. Using the optimum concentrations pluronic F127, hydroxypropyl methyl cellulose, D-mannitol, and l-leucine in aqueous ethanol, the IBP microparticles were prepared. The dissolution tests were performed in phosphate buffer saline using a United States Pharmacopoeia dissolution tester at 37°C. The Raman spectroscopy was used to investigate the interactions and distribution of the IBP with the additives in the microcrystals. The prepared IBP microparticles showed higher dissolution compared to that of the smaller sized original IBP particles. The Raman data revealed that the excipients with a large number of hydroxyl groups distributed around the IBP particle in the crystal enhanced the dissolution of the drug by increasing the drug-solvent interaction presumably through hydrogen bonding. The Raman mapping technique gave an insight into the enhanced dissolution behavior of the prepared IBP microparticles, and such information will be useful for developing pharmaceutical formulations of hydrophobic drugs. The controlled crystallization was a useful technique to prepare complex crystals of IBP microparticles along with other additives to achieve the enhanced dissolution profile.

Amino acid conjugated chitosan nanoparticles for the brain targeting of a model dipeptidyl peptidase-4 inhibitor

Saxagliptin (SAX) is a dipeptidyl peptidase-4 enzyme inhibitor molecule now explored for its activity in the therapy of Alzheimer's disease. Being extremely hydrophilic, it is unable to permeate the blood-brain barrier by the conventional therapy modalities. Further repurposing the drug, SAX is associated with a reduction in the blood sugar level in the periphery. In the present study, the chitosan-l-valine conjugate was synthesized by carbodiimide chemistry. The conjugate was then used to prepare nanoparticles encapsulating SAX. The nanoparticles were characterized by particle size, surface morphology, and entrapment efficiency. The stability of the formulations was determined by incubation with rat plasma and brain homogenate. The blood brain barrier permeability of the nanoparticles was successfully demonstrated by the incorporation of fluorescent dye, Rhodamine B in the nanoparticles. In vivo studies were conducted in rats and the results showed that the nanoparticles were highly stable in the plasma releasing only a minute amount of SAX (2.5 ng/mL) which was less than the C_max of the pure SAX (51 ng/mL). The brain uptake studies showed an accumulation of 53 ng/mL SAX from the nanoparticles whereas the pure SAX showed no detectable amount of the drug after 24 h. The pharmacokinetic studies demonstrated that nanoparticles had an (AUC_0-t) of 3.42 times lower than the pure SAX, indicating the stability of the prepared formulation in the plasma.

Preparation of Drug Eluting Natural Composite Scaffold Using Response Surface Methodology and Artificial Neural Network Approach

Silk fibroin/xanthan composite was investigated as a suitable biomedical material for controlled drug delivery, and blending ratios of silk fibroin and xanthan were optimized by response surface methodology (RSM) and artificial neural network (ANN) approach. A non-linear ANN model was developed to predict the effect of blending ratios, percentage swelling and porosity of composite material on cumulative percentage release. The efficiency of RSM was assessed against ANN and it was found that ANN is better in optimizing and modeling studies for the fabrication of the composite material. In-vitro release studies of the loaded drug chloramphenicol showed that the optimum composite scaffold was able to minimize burst release of drug and was followed by controlled release for 5 days. Mechanistic study of release revealed that the drug release process is diffusion controlled. Moreover, during tissue engineering application, investigation of release pattern of incorporated bioactive agent is beneficial to predict, control and monitor cellular response of growing tissues. This work also presented a novel insight into usage of various drug release model to predict material properties. Based on the goodness of fit of the model, Korsmeyer-Peppas was found to agree well with experimental drug release profile, which indicated that the fabricated material has swellable nature. The chloramphenicol (CHL) loaded scaffold showed better efficacy against gram positive and gram negative bacteria. CHL loaded SFX55 (50:50) scaffold shows promising biocomposite for drug delivery and tissue engineering applications.

Low density, good flowability cyclodextrin-raffinose binary carrier for dry powder inhaler: anti-hygroscopicity and aerosolization performance enhancement

BACKGROUND

The hygroscopicity of raffinose carrier for dry powder inhaler (DPI) was the main obstacle for its further application. Hygroscopicity-induced agglomeration would cause deterioration of aerosolization performance of raffinose, undermining the delivery efficiency.

METHODS

Cyclodextrin-raffinose binary carriers (CRBCs) were produced by spray-drying so as to surmount the above issue. Physicochemical attributes and formation mechanism of CRBCs were explored in detail. The flow property of CRBCs was examined by FT4 Powder Rheometer. Hygroscopicity of CRBCs was elucidated by dynamic vapor sorption study. Aerosolization performance was evaluated by in vitro deposition profile and in vivo pharmacokinetic profile of CRBC based DPI formulations.

RESULTS

The optimal formulation of CRBC (R₄) was proven to possess anti-hygroscopicity and aerosolization performance enhancement properties. Concisely, the moisture uptake of R₄ was c.a. 5% which was far lower than spray-dried raffinose (R₀, c.a. 65%). R₄ exhibited a high fine particle fraction value of 70.56 ± 0.61% and it was 3.75-fold against R₀. The pulmonary and plasmatic bioavailability of R₄ were significantly higher than R₀ (p < 0.05).

CONCLUSION

CRBC with anti-hygroscopicity and aerosolization performance enhancement properties was a promising approach for pulmonary drug delivery, which could provide new possibilities to the application of hygroscopic carriers for DPI.

Imagine the Superiority of Dry Powder Inhalers from Carrier Engineering

Inhalation therapy has strong history of more than 4000 years and it is well recognized around the globe within every culture. In early days, inhalation therapy was designed for treatment of local disorders such as asthma and other pulmonary diseases. Almost all inhalation products composed a simple formulation of a carrier, usually α-lactose monohydrate orderly mixed with micronized therapeutic agent. Most of these formulations lacked satisfactory pulmonary deposition and dispersion. Thus, various alternative carrier's molecules and powder processing techniques are increasingly investigated to achieve suitable aerodynamic performance. In view of this fact, more suitable and economic alternative carrier's molecules with advanced formulation strategies are discussed in the present review. Furthermore, major advances, challenges, and the future perspective are discussed.

Formulation and delivery strategies of ibuprofen: challenges and opportunities

Ibuprofen, a non-steroidal anti-inflammatory drug (NSAID), is mostly administered orally and topically to relieve acute pain and fever. Due to its mode of action this drug may be useful in the treatment regimens of other, more chronic conditions, like cystic fibrosis. This drug is poorly soluble in aqueous media and thus the rate of dissolution from the currently available solid dosage forms is limited. This leads to poor bioavailability at high doses after oral administration, thereby increasing the risk of unwanted adverse effects. The poor solubility is a problem for developing injectable solution dosage forms. Because of its poor skin permeability, it is difficult to obtain an effective therapeutic concentration from topical preparations. This review aims to give a brief insight into the status of ibuprofen dosage forms and their limitations, particle/crystallization technologies for improving formulation strategies as well as suggesting its incorporation into the pulmonary drug delivery systems for achieving better therapeutic action at low dose.

Surface Analysis of Nanocomplexes by X-ray Photoelectron Spectroscopy (XPS)

Self-assembled nanocomplexes composed of individual molecules that spontaneously connect via noncovalent interactions have recently emerged as versatile alternatives to conventional controlled drug delivery systems because of their unique bioinspired properties (responsiveness, dynamics, etc.). Characterization of such nanocomplexes typically includes their size distribution, surface charge, morphology, drug entrapment efficiency, and verification of the coexistence of labeled components within the nanocomplexes using a colocalization study. Less common is the direct examination of the molecular interactions between the different components in the coassembled nanocomplex, especially in nanocomplexes composed of hygroscopic components, because convenient methods are still lacking. Here, we present a detailed experimental protocol for determining the surface composition and the chemical bonds by X-ray photoelectron spectroscopy (XPS) after drying the deposit hygroscopic sample overnight under UHV. We applied this method to investigate the surface chemistry of binary Ca²⁺-siRNA nanocomplexes and ternary nanocomplexes of hyaluronan-sulfate (HAS)-Ca²⁺-siRNA, deposited on a wafer. Notably, we showed that the protocol can be implemented to study the surface composition and interactions of the deposited nanocomplexes with a traditional XPS instrument, and it requires only a relatively small amount of the nanocomplex suspension.

Recent advances in chitosan-based nanoparticulate pulmonary drug delivery

The advent of biodegradable polymer-encapsulated drug nanoparticles has made the pulmonary route of administration an exciting area of drug delivery research. Chitosan, a natural biodegradable and biocompatible polysaccharide has received enormous attention as a carrier for drug delivery. Recently, nanoparticles of chitosan (CS) and its synthetic derivatives have been investigated for the encapsulation and delivery of many drugs with improved targeting and controlled release. Herein, recent advances in the preparation and use of micro-/nanoparticles of chitosan and its derivatives for pulmonary delivery of various therapeutic agents (drugs, genes, vaccines) are reviewed. Although chitosan has wide applications in terms of formulations and routes of drug delivery, this review is focused on pulmonary delivery of drug-encapsulated nanoparticles of chitosan and its derivatives. In addition, the controversial toxicological effects of chitosan nanoparticles for lung delivery will also be discussed.

Carriers for the tunable release of therapeutics: etymological classification and examples

Introduction Physiological processes at the molecular level take place at precise spatiotemporal scales, which vary from tissue to tissue and from one patient to another, implying the need for carriers that enable tunable release of therapeutics. Areas covered Classification of all drug release to intrinsic and extrinsic is proposed, followed by the etymological clarification of the term 'tunable' and its distinction from the term 'tailorable'. Tunability is defined as analogous to tuning a guitar string or a radio receiver to the right frequency using a single knob. It implies changing a structural parameter along a continuous quantitative scale and correlating it numerically with the release kinetics. Examples of tunable, tailorable and environmentally responsive carriers are given, along with the parameters used to achieve these levels of control. Expert opinion Interdependence of multiple variables defining the carrier microstructure obstructs the attempts to elucidate parameters that allow for the independent tuning of release kinetics. Learning from the tunability of nanostructured materials and superstructured metamaterials can be a fruitful source of inspiration in the quest for the new generation of tunable release carriers. The greater intersection of traditional materials sciences and pharmacokinetic perspectives could foster the development of more sophisticated mechanisms for tunable release.