Effects of the Microparticle Shape on Cellular Uptake

Investigation of the size and shape of nano-microcarriers for targeted drug delivery to atherosclerotic plaque in ischemic stroke prevention

Recognizing the significance of drug carriers in the treatment of atherosclerotic plaque is crucial in light of the worldwide repercussions of ischemic stroke. Conservative methodologies, specifically targeted drug delivery, present encouraging substitutes that mitigate the hazards linked to invasive procedures. With the intention of illuminating their considerable significance and prospective benefits, this study examines the impact of the geometry and dimensions of drug-loaded nano-microcarriers on atherosclerotic plaque. The research utilizes a finite element approach to simulate the motion and fluid dynamics of nano-microcarriers loaded with drugs within the carotid arteries. Carriers are available in a variety of shapes and sizes to accommodate patient-specific geometries, pulsatile fluid flow, and non-Newtonian blood properties. Optimization of drug delivery is achieved through the examination of carrier interaction with the inner wall. The results demonstrated that the interaction data between particles and the inner wall of atherosclerotic plaques exhibits micro- and nanoscale patterns that are distinct. Symmetric plaques demonstrate that nanoparticles with a 0.4 shape factor and diameters below 200 nm show the highest interaction rate. Conversely, larger particles (200 and 500 nm) with shape factors of 1 demonstrate comparatively elevated interaction rates. The optimal shape factor for drug-loaded microparticles has been determined to be one, and the number of interactions increases as the diameter of the nanoparticles increases, with a significant increase observed at a shape factor of one. Asymmetric plaques exhibit the maximum interaction rates among particles that have a shape factor of 0.4 and have diameters smaller than 500 µm. The findings establish a foundation for novel therapeutic strategies, establishing nano-microparticles as auspicious contenders for accurate and efficacious drug delivery systems that inhibit plaque proliferation.

Assessment of the cytotoxic effect of carboxymethyl chitosan-loaded amygdalin nanoparticles against human normal and cancer cell lines

In recent years, the development of antitumor drugs has been dedicated to natural products. Amygdalin is a natural herbal cyanoglycoside that has anticarcinogenic effect on many types of cancers once hydrogen cyanide (HCN) is released. The main objective of the present study is to synthesize and investigate the potential of carboxymethyl chitosan nanoparticles (CMC NPs) as drug delivery agents for amygdalin encapsulation and its delivery to cancer and normal cell lines. In this study, carboxymethyl chitosan nanoparticles encapsulated with amygdalin (CMC-Am NPs) were prepared and characterized through their particle size, surface charge, chemical structure and dielectric properties. Also, the invitro drug release of amygdalin from CMC NPs was studied. Additionally, the cytotoxcity of the amygdalin and CMC-loaded amygdalin NPs were evaluated through MTT assay. The results showed that the prepared CMC-loaded amygdalin NPs exhibited a small particle size of 129 nm, high zeta potential value of - 43 mV and confirmed the amygdalin stability and compatibility with CMC NPs. Furthermore, the CMC NPs demonstrated sustained release of amygdalin during 24 h. Moreover, compared to free amygdalin, amygdalin-loaded CMC NPs have significant anti-cancerous effect on human colon HCT-116 and breast MCF-7 cancer cell lines while being safe on normal cells BJ1. In conclusion, CMC NPs can be employed as an efficient drug delivery vehicle for controlled and sustained amygdalin release with enhanced cytotoxicity on malignant cells without harming normal cells.

Carbon monoxide release from ultrasound-sensitive microbubbles improves endothelial cell growth

Carbon monoxide is a gasotransmitter that may be beneficial for vascular tissue engineering and regenerative medicine strategies because it can promote endothelial cell (EC) proliferation and migration by binding to heme-containing compounds within cells. For example, CO may be beneficial for vascular cognitive impairment and dementia because many patients' disrupted blood-brain barriers do not heal naturally. However, control of the CO dose is critical, and new controlled delivery methods need to be developed. This study developed ultrasound-sensitive microbubbles with a carefully controlled precipitation technique, loaded them with CO, and assessed their ability to promote EC proliferation and function. Microbubbles fabricated with perfluoropentane exhibited good stability at room temperature, but they could still be ruptured and release CO in culture with application of ultrasound. Microbubbles synthesized from the higher boiling point compound, perfluorohexane, were too stable at physiological temperature. The lower-boiling point perfluoropentane microbubbles had good biocompatibility and appeared to improve VE-cadherin expression when CO was loaded in the bubbles. Finally, tissue phantoms were used to show that an imaging ultrasound probe can efficiently rupture the microbubbles and that the CO-loaded microbubbles can improve EC spreading and proliferation compared to control conditions without microbubbles as well as microbubbles without application of ultrasound. Overall, this study demonstrated the potential for use of these ultrasound-sensitive microbubbles for improving blood vessel endothelialization.

Rapid single-particle chemical imaging of nanoplastics by SRS microscopy

Plastics are now omnipresent in our daily lives. The existence of microplastics (1 µm to 5 mm in length) and possibly even nanoplastics (<1 μm) has recently raised health concerns. In particular, nanoplastics are believed to be more toxic since their smaller size renders them much more amenable, compared to microplastics, to enter the human body. However, detecting nanoplastics imposes tremendous analytical challenges on both the nano-level sensitivity and the plastic-identifying specificity, leading to a knowledge gap in this mysterious nanoworld surrounding us. To address these challenges, we developed a hyperspectral stimulated Raman scattering (SRS) imaging platform with an automated plastic identification algorithm that allows micro-nano plastic analysis at the single-particle level with high chemical specificity and throughput. We first validated the sensitivity enhancement of the narrow band of SRS to enable high-speed single nanoplastic detection below 100 nm. We then devised a data-driven spectral matching algorithm to address spectral identification challenges imposed by sensitive narrow-band hyperspectral imaging and achieve robust determination of common plastic polymers. With the established technique, we studied the micro-nano plastics from bottled water as a model system. We successfully detected and identified nanoplastics from major plastic types. Micro-nano plastics concentrations were estimated to be about 2.4 ± 1.3 × 105 particles per liter of bottled water, about 90% of which are nanoplastics. This is orders of magnitude more than the microplastic abundance reported previously in bottled water. High-throughput single-particle counting revealed extraordinary particle heterogeneity and nonorthogonality between plastic composition and morphologies; the resulting multidimensional profiling sheds light on the science of nanoplastics.

Recent advances in polymeric microparticle-based drug delivery systems for knee osteoarthritis treatment

Due to the poor bioavailability and high joint clearance of drugs, sustained delivery of therapeutic agents has proven difficult in the treatment of osteoarthritis (OA). Intra-articular (IA) drug delivery strategy is an attractive option for enhancing OA patients' prognosis, for which various polymer materials have been used as drug carriers due to their attractive delivery properties, to slow or even reverse the progress of OA by prolonging the duration of therapeutic agent residence in the joint. This article focuses on the recent developments in natural and synthetic polymer-based microsphere drug delivery systems for treating knee osteoarthritis. It evaluates the translational potential of some novel formulations for clinical application.

Confocal microscopy 3D imaging and bioreactivity of La Palma volcanic ash particles

In September 2021 an eruption began of Cumbre Vieja, La Palma (Spain) that lasted 3 months. Previous studies have shown that volcanic ash particles can be associated with adverse effects on human health however, the reasons for this are unclear. Particle shape has been shown to contribute to cellular uptake in prostate cancer cells. Hence we aimed to study 3D structure, elemental composition and effects on cultured lung cells of particles collected from the La Palma volcanic eruption. 3D imaging of PM10 sized and below particles was performed using a LEXT OLS4100 confocal microscope (Olympus Corporation, Japan). A Zeiss EVO 50 (Carl Zeiss AG, Germany) Scanning Electron Microscope (SEM) was used to assess elemental composition. In addition, volcanic particle concentration dose response for pneumococcal adhesion to A549 human alveolar epithelial cells was investigated. Confocal microscopy showed that some PM10 and below sized particles had sharp or angular 3D appearance. SEM x-ray analysis indicated silicate particles with calcium, aluminium and iron. We observed increased colony forming units indicating increased Pneumococcal adhesion due to exposure of cells to volcanic particles. Thus in addition to the toxic nature of some volcanic particles, we suggest that the observed sharp surface particle features may help to explain adverse health effects associated with volcanic eruptions.

Adjuvanted-SARS-CoV-2 Spike Protein-Based Microparticulate Vaccine Delivered by Dissolving Microneedles Induces Humoral, Mucosal, and Cellular Immune Responses in Mice

COVID-19 continues to cause an increase in the number of cases and deaths worldwide. Due to the ever-mutating nature of the virus, frequent vaccination against COVID-19 is anticipated. Most of the approved SARS-CoV-2 vaccines are administered using the conventional intramuscular route, causing vaccine hesitancy. Thus, there is a need for an effective, non-invasive vaccination strategy against COVID-19. This study evaluated the synergistic effects of a subunit microparticulate vaccine delivered using microneedles. The microparticles encapsulated a highly immunogenic subunit protein of the SARS-CoV-2 virus, such as the spike protein's receptor binding domain (RBD). Adjuvants were also incorporated to enhance the spike RBD-specific immune response. Our vaccination study reveals that a microneedle-based vaccine delivering these microparticles induced spike RBD-specific IgM, IgG, IgG1, IgG2a, and IgA antibodies. The vaccine also generated high levels of CD4+ and CD8a+ molecules in the secondary lymphoid organs. Overall, dissolving microneedles delivery spike RBD antigen in microparticulate form induced a robust immune response, paving the way for an alternative self-administrable, non-invasive vaccination strategy against COVID-19.

Lysosomal nanotoxicity: Impact of nanomedicines on lysosomal function

Although several nanomedicines got clinical approval over the past two decades, the clinical translation rate is relatively small so far. There are many post-surveillance withdrawals of nanomedicines caused by various safety issues. For successful clinical advancement of nanotechnology, it is of unmet need to realize cellular and molecular foundation of nanotoxicity. Current data suggest that lysosomal dysfunction caused by nanoparticles is emerging as the most common intracellular trigger of nanotoxicity. This review analyzes prospect mechanisms of lysosomal dysfunction-mediated toxicity induced by nanoparticles. We summarized and critically assessed adverse drug reactions of current clinically approved nanomedicines. Importantly, we show that physicochemical properties have great impact on nanoparticles interaction with cells, excretion route and kinetics, and subsequently on toxicity. We analyzed literature on adverse reactions of current nanomedicines and hypothesized that adverse reactions might be linked with lysosomal dysfunction caused by nanomedicines. Finally, from our analysis it becomes clear that it is unjustifiable to generalize safety and toxicity of nanoparticles, since different particles possess distinct toxicological properties. We propose that the biological mechanism of the disease progression and treatment should be central in the optimization of nanoparticle design.

Localized nuclear reaction breaks boron drug capsules loaded with immune adjuvants for cancer immunotherapy

Boron neutron capture therapy (BNCT) was clinically approved in 2020 and exhibits remarkable tumour rejection in preclinical and clinical studies. It is binary radiotherapy that may selectively deposit two deadly high-energy particles (4He and 7Li) within a cancer cell. As a radiotherapy induced by localized nuclear reaction, few studies have reported its abscopal anti-tumour effect, which has limited its further clinical applications. Here, we engineer a neutron-activated boron capsule that synergizes BNCT and controlled immune adjuvants release to provoke a potent anti-tumour immune response. This study demonstrates that boron neutron capture nuclear reaction forms considerable defects in boron capsule that augments the drug release. The following single-cell sequencing unveils the fact and mechanism that BNCT heats anti-tumour immunity. In female mice tumour models, BNCT and the controlled drug release triggered by localized nuclear reaction causes nearly complete regression of both primary and distant tumour grafts.

An Adjuvanted Inactivated SARS-CoV-2 Microparticulate Vaccine Delivered Using Microneedles Induces a Robust Immune Response in Vaccinated Mice

SARS-CoV-2, the causal agent of COVID-19, is a contagious respiratory virus that frequently mutates, giving rise to variant strains and leading to reduced vaccine efficacy against the variants. Frequent vaccination against the emerging variants may be necessary; thus, an efficient vaccination system is needed. A microneedle (MN) vaccine delivery system is non-invasive, patient-friendly, and can be self-administered. Here, we tested the immune response produced by an adjuvanted inactivated SARS-CoV-2 microparticulate vaccine administered via the transdermal route using a dissolving MN. The inactivated SARS-CoV-2 vaccine antigen and adjuvants (Alhydrogel® and AddaVax™) were encapsulated in poly(lactic-co-glycolic acid) (PLGA) polymer matrices. The resulting MP were approximately 910 nm in size, with a high percentage yield and percent encapsulation efficiency of 90.4%. In vitro, the vaccine MP was non-cytotoxic and increased the immunostimulatory activity measured as nitric oxide release from dendritic cells. The adjuvant MP potentiated the immune response of the vaccine MP in vitro. In vivo, the adjuvanted SARS-CoV-2 MP vaccine induced high levels of IgM, IgG, IgA, IgG1, and IgG2a antibodies and CD4+ and CD8+ T-cell responses in immunized mice. In conclusion, the adjuvanted inactivated SARS-CoV-2 MP vaccine delivered using MN induced a robust immune response in vaccinated mice.

Metal-organic framework for biomimetic nitric oxide generation and anticancer drug delivery

The potential therapeutic implications of nitric oxide (NO) have drawn a great deal of interest for reversing multidrug resistance (MDR) in cancer; however, previous strategies utilized unstable or toxic NO donors often oxidized by the excessive addition of reactive oxygen species, leading to unexpected side effects. Therefore, this study proposed a metal-organic framework (MOF), Porous coordination network (PCN)-223-Fe, to be loaded with a biocompatible NO donor, L-arginine (L-arg; i.e., PCN-223-Fe/L-arg). This specific MOF possesses a ligand of Fe-porphyrin, a biomimetic catalyst. Thus, with PCN-223-Fe/L-arg, L-arg was released in a sustained manner, which generated NO by a catalytic reaction between L-arg and Fe-porphyrin in PCN-223-Fe. Through this biomimetic process, PCN-223-Fe/L-arg could generate sufficient NO to reverse MDR at the expense of hydrogen peroxide already present and highly expressed in cancer environments. For treatment of MDR cancer, this study also proposed PCN-223-Fe loaded with an anticancer drug, irinotecan (CPT-11; i.e., PCN-223-Fe/CPT-11), to be formulated together with PCN-223-Fe/L-arg. Owing to the synergistic effect of reversed MDR by NO generation and sustained release of CPT-11, this combined formulation exhibited a higher anticancer effect on MDR cancer cells (MCF-7/ADR). When intratumorally injected in vivo, coadministration of PCN-223-Fe/L-arg and PCN-223-Fe/CPT-11 greatly suppressed tumor growth in nude mice bearing MDR tumors.

Emerging Strategies of Engineering and Tracking Dendritic Cells for Cancer Immunotherapy

Dendritic cells (DCs), a kind of specialized immune cells, play key roles in antitumor immune response and promotion of innate and adaptive immune responses. Recently, many strategies have been developed to utilize DCs in cancer therapy, such as delivering antigens and adjuvants to DCs and using scaffold to recruit and activate DCs. Here we outline how different DC subsets influence antitumor immunity, summarize the FDA-approved vaccines and cancer vaccines under clinical trials, discuss the strategies for engineering DCs and noninvasive tracking of DCs to improve antitumor immunotherapy, and reveal the potential of artificial neural networks for the design of DC based vaccines.

Recent advances in surface modification of micro- and nano-scale biomaterials with biological membranes and biomolecules

Surface modification of biomaterial can improve its biocompatibility and add new biofunctions, such as targeting specific tissues, communication with cells, and modulation of intracellular trafficking. Here, we summarize the use of various natural materials, namely, cell membrane, exosomes, proteins, peptides, lipids, fatty acids, and polysaccharides as coating materials on micron- and nano-sized particles and droplets with the functions imparted by coating with different materials. We discuss the applicability, operational parameters, and limitation of different coating techniques, from the more conventional approaches such as extrusion and sonication to the latest innovation seen on the microfluidics platform. Methods commonly used in the field to examine the coating, including its composition, physical dimension, stability, fluidity, permeability, and biological functions, are reviewed.

Particle shape engineering for improving safety and efficacy of doxorubicin - A case study of rod-shaped carriers in resistant small cell lung cancer

Therapeutic drug delivery is known to be influenced by interplay between various design parameters of delivery carriers which influence the drug uptake efficiency and subsequently the effectiveness of treatment. Amongst, the several design parameters such as size, shape and surface charge, particle shape is gaining attention as a crucial design parameter for development of robust and efficient delivery carriers. In this exploration, we investigated the influence of particle shape on injectability and therapeutic effectiveness of the delivery carriers using doxorubicin (DOX) conjugated polymeric microparticles. Results of injectability experiments demonstrated the influence of particle shape with anisotropic rod-shaped particles displaying increased injectability as against spherical particles. Impact of particle shape on therapeutic effectiveness was assessed against small cell lung cancer (SCLC) which was selected as a model disease. Results of cellular uptake studies revealed preferential uptake of rod-shaped particles than spherical particles in cancer cells. These results were further validated by in-vitro tumor simulation studies wherein rod-shaped particles displayed enhanced anti-tumorigenic activity along with distortion of tumor integrity against spheres. Furthermore, the impact of particle size was also assessed on cardiotoxicity, an adverse effect of DOX which limits its therapeutic use. Results illustrated that the high aspect ratio particles displayed diminished cardiotoxicity activity. These results provide valuable insights about influence of particle shape for designing efficient therapeutics.

Polyhedral Particles with Controlled Concavity by Indentation Templating

Current methods for fabricating microparticles offer limited control over size and shape. Here, we demonstrate a droplet microfluidic method to form polyhedral microparticles with controlled concavity. By manipulating Laplace pressure, buoyancy, and particle rheology, we generate microparticles with diverse shapes and curvatures. Additionally, we demonstrate the particles provide increased capture efficiency when used for particle-templated emulsification. Our approach enables microparticles with enhanced chemical and biological functionality.

Comprehensive Review on the Interactions of Clay Minerals With Animal Physiology and Production

Clay minerals are naturally occurring rock and soil materials primarily composed of fine-grained aluminosilicate minerals, characterized by high hygroscopicity. In animal production, clays are often mixed with feed and, due to their high binding capacity towards organic molecules, used to limit animal absorption of feed contaminants, such as mycotoxins and other toxicants. Binding capacity of clays is not specific and these minerals can form complexes with different compounds, such as nutrients and pharmaceuticals, thus possibly affecting the intestinal absorption of important substances. Indeed, clays cannot be considered a completely inert feed additive, as they can interfere with gastro-intestinal (GI) metabolism, with possible consequences on animal physiology. Moreover, clays may contain impurities, constituted of inorganic micronutrients and/or toxic trace elements, and their ingestion can affect animal health. Furthermore, clays may also have effects on the GI mucosa, possibly modifying nutrient digestibility and animal microbiome. Finally, clays may directly interact with GI cells and, depending on their mineral grain size, shape, superficial charge and hydrophilicity, can elicit an inflammatory response. As in the near future due to climate change the presence of mycotoxins in feedstuffs will probably become a major problem, the use of clays in feedstuff, given their physico-chemical properties, low cost, apparent low toxicity and eco-compatibility, is expected to increase. The present review focuses on the characteristics and properties of clays as feed additives, evidencing pros and cons. Aims of future studies are suggested, evidencing that, in particular, possible interferences of these minerals with animal microbiome, nutrient absorption and drug delivery should be assessed. Finally, the fate of clay particles during their transit within the GI system and their long-term administration/accumulation should be clarified.

Hipster microcarriers: exploring geometrical and topographical cues of non-spherical microcarriers in biomedical applications

Structure and organisation are key aspects of the native tissue environment, which ultimately condition cell fate via a myriad of processes, including the activation of mechanotransduction pathways. By modulating the formation of integrin-mediated adhesions and consequently impacting cell contractility, engineered geometrical and topographical cues may be introduced to activate downstream signalling and ultimately control cell morphology, proliferation, and differentiation. Microcarriers appear as attractive vehicles for cell-based tissue engineering strategies aiming to modulate this 3D environment, but also as vehicles for cell-free applications, given the ease in tuning their chemical and physical properties. In this review, geometry and topography are highlighted as two preponderant features in actively regulating interactions between cells and the extracellular matrix. While most studies focus on the 2D environment, we focus on how the incorporation of these strategies in 3D systems could be beneficial. The techniques applied to design 3D microcarriers with unique geometries and surface topographical cues are covered, as well as specific tissue engineering approaches employing these microcarriers. In fact, successfully achieving a functional histoarchitecture may depend on a combination of fine-tuned geometrically shaped microcarriers presenting intricately tailored topographical cues. Lastly, we pinpoint microcarrier geometry as a key player in cell-free biomaterial-based strategies, and its impact on drug release kinetics, the production of steerable microcarriers to target tumour cells, and as protein or antibody biosensors.

PEG-4000 formed polymeric nanoparticles loaded with cetuximab downregulate p21 &stathmin-1 gene expression in cancer cell lines

Cetuximab (CTX) is known to have cytotoxic effects on several human cancer cells in vitro; however, as CTX is poorly water soluble, there is a need for improved formulations can reach cancer cells at high concentrations with low side effects. We developed (PEG-4000) polymeric nanoparticles (PEGNPs) loaded with CTX and evaluated their in vitro cytotoxicity and anticancer properties against human lung (A549) and breast (MCF-7) cancer cells. CTX-PEGNPs were formulated using the solvent evaporation technique, and their morphological properties were evaluated. Further, the effects of CTX-PEGNPs on cell viability using the MTT assay and perform gene expression analysis, DNA fragmentation measurements, and the comet assay. CTX-PEGNP showed uniformly dispersed NPs of nano-size range (253.7 ± 0.3 nm), and low polydispersity index (0.16) indicating the stability and uniformity of NPs. Further, the zeta potential of the preparations was -17.0 ± 1.8 mv. DSC and FTIR confirmed the entrapping of CTX in NPs. The results showed IC₅₀ values of 2.26 μg/mL and 1.83 μg/mL for free CTX and CTX-PEGNPs on the A549 cancer cell line, respectively. Moreover, CTX-PEGNPs had a lower IC₅₀ of 1.12 μg/mL in MCF-7 cells than that of free CTX (2.28 μg/mL). The expression levels of p21 and stathmin-1 were significantly decreased in both cell lines treated with CTX-PEGNPs compared to CTX alone. The CTX-PEGNP-treated cells also showed increased DNA fragmentation rates in both cancer cell lines compared with CTX alone. The results indicated that CTX-PEGNP was an improved formulation than CTX alone to induce apoptosis and DNA damage and inhibit cell proliferation through the downregulation of P21 and stathmin-1 expression.

Multifunctional Nanosystems with Enhanced Cellular Uptake for Tumor Therapy

Rapid development of nanotechnology provides promising strategies in biomedicine, especially in tumor therapy. In particular, the cellular uptake of nanosystems is not only a basic premise to realize various biomedical applications, but also a fatal factor for determining the final therapeutic effect. Thus, a systematic and comprehensive summary is necessary to overview the recent research progress on the improvement of nanosystem cellular uptake for cancer treatment. According to the process of nanosystems entering the body, they can be classified into three categories. The first segment is to enhance the accumulation and permeation of nanosystems to tumor cells through extracellular microenvironment stimulation. The second segment is to improve cellular internalization from extracellular to intracellular via active targeting. The third segment is to enhance the intracellular retention of therapeutics by subcellular localization. The major factors in the delivery can be utilized to develop multifunctional nanosystems for strengthening the tumor therapy. Ultimately, the key challenges and prospective in the emerging research frontier are thoroughly outlined. This review is expected to provide inspiring ideas, promising strategies and potential pathways for developing advanced anticancer nanosystems in clinical practice.

SHMT1 siRNA-Loaded hyperosmotic nanochains for blood-brain/tumor barrier post-transmigration therapy

The near-perivascular accumulation in solid tumors and short-lived span in circulation, derails even the most competent nanoparticles (NPs) from achieving their maximum therapeutic potential. Moreover, delivering them across the blood brain/tumor barrier (BBB/BTB) is further challenging to sought anticancer effect. To address these key challenges, we designed a linearly aligned nucleic acid-complexed polydixylitol-based polymeric nanochains (X-NCs), with inherent hyperosmotic properties enabling transmigration of the BBB/BTB and navigation through deeper regions of the brain tumor. The high aspect ratio adds shape-dependent functional aspects to parent particles by providing effective payload increment and nuclear factor of activated T cells-5 (NFAT5)-mediated cellular uptake. Therefore, serine hydroxymethyltransferase 1 (SHMT1) siRNA-loaded nanochains not only demonstrated to transmigrate the BTB, but also resulted in remarkably reducing the tumor size to 97% in the glioblastoma xenograft brain tumor mouse models. Our study illustrates how the hyperosmotic nanochains with high aspect ratio and aligned structure can accelerate a therapeutic effect in aggressive brain tumors post-transmigration of the BBB/BTB by utilizing an NFAT5 mode of uptake mechanism.

Effect of micro- and nanoparticle shape on biological processes

In the drug delivery field, there is beyond doubt that the shape of micro- and nanoparticles (M&NPs) critically affects their biological fate. Herein, following an introduction describing recent technological advances for designing nonspherical M&NPs, we highlight the role of particle shape in cell capture, subcellular distribution, intracellular drug delivery, and cytotoxicity. Then, we discuss theoretical approaches for understanding the effect of particle shape on internalization by the cell membrane. Subsequently, recent advances on shape-dependent behaviors of M&NPs in the systemic circulation are detailed. In particular, the interaction of M&NPs with blood proteins, biodistribution, and circulation under flow conditions are analyzed. Finally, the hurdles and future directions for developing nonspherical M&NPs are underscored.

Effect of particle size on in vivo performances of long-acting injectable drug suspension

Herein, entecavir-3-palmitate (EV-P), an ester prodrug of entecavir (EV), was employed as a model drug, and the effect of drug particle size on in vivo pharmacokinetic profiles and local inflammatory responses, and those associations were evaluated following intramuscular (IM) injection. EV-P crystals with different median diameters (0.8, 2.3, 6.3, 15.3 and 22.6 μm) were prepared using the anti-solvent crystallization method, with analogous surface charges (-10.7 ~ -4.7 mV), and crystallinity (melting point, 160-170 °C). EV-P particles showed size-dependent in vitro dissolution profiles under sink conditions, exhibiting a high correlation between the median diameter and Hixon-Crowell's release rate constant (r² = 0.94). Following IM injection in rats (1.44 mg/kg as EV), the pharmacokinetic profile of EV exhibited marked size-dependency; 0.8 μm-sized EV-P particles about 1.6-, 3.6-, and 5.6-folds higher systemic exposure, compared to 6.3, 15.3, and 22.6 μm-sized particles, respectively. This pharmacokinetic pattern, depending on particle size, was also highly associated with histopathological responses in the injected tissue. The smaller EV-P particles (0.8 or 2.3 μm) imparted the larger inflammatory lesion after 3 days, lower infiltration of inflammatory cells, and thinner fibroblastic bands around depots after 4 weeks. Conversely, severe fibrous isolation with increasing particle size augmented the drug remaining at injection site over 4 weeks, impeding the dissolution and systemic exposure. These findings regarding the effects of formulation variable on the in vivo behaviors of long-acting injectable suspension, provide constructive knowledge toward the improved design in poorly water-soluble compounds.

Nanosuspension coated multiparticulates for controlled delivery of albendazole

OBJECTIVE

Improving solubility and bioavailability of albendazole (ALB).

SIGNIFICANCE

ALB is a broad-spectrum anthelminthic BCS class II drug with aqueous solubility of solubility of 4.1 mg/l at 25 °C and oral bioavailability of <5%.

METHODS

ALB nanosuspensions (NSs) were prepared by evaporative antisolvent precipitation using tocopherol polyethylene glycol succinate (TPGS) and polyvinyl pyrrolidone (PVP) as stabilizers and characterized for particle size, polydispersity index, and zeta potential. 3² factorial design was used to investigate effect of stabilizer concentration and speed of stirring on particle size. Concentration of TPGS was varied from 0.03 to 0.05% w/v and PVP K-30 was constant at 0.04% w/v. Stirring speed range was 1000-3000 rpm. Optimized NS was loaded on Espheres and coated with Eudragit S10& L100 and studied for friability, surface morphology and release kinetics.

RESULTS

Factorial experiments revealed pronounced effect of TPGS on particle size. Optimized batch had particle size of 251 ± 7.2 nm and zeta potential -16.2 ± 2.68 mV. Saturation solubility showed increase of 16-fold in water whereas in phosphate buffer increase was fourfold. ALB-NS secondary coated Espheres released 94.3% drug in 10 h whereas ALB-MS (microsuspension) coated Espheres showed 58% release. A 1.3-fold increase in AUC_0-10h was evident. Permeation from ALB-NS coated Espheres was 32% in 60 min while for ALB-MS coated Espheres it was 20%. Permeation increase occurred due to presence of TPGS which acts as a permeation enhancer.

Recent Advances in Clinical Translation of Intra-Articular Osteoarthritis Drug Delivery Systems

Osteoarthritis (OA) is a degenerative disease of the joints and a leading cause of physical disability in adults. Intra-articular (IA) therapy is a popular treatment strategy for localized, single-joint OA; however, small-molecule drugs such as corticosteroids do not provide prolonged relief. One possible reason for their lack of efficacy is high clearance rates from the joint through constant lymphatic drainage of the synovial tissues and synovial fluid and also by their exchange via the synovial vasculature. Advanced drug delivery strategies for extended release of therapeutic agents in the joint space is a promising approach to improve outcomes for OA patients. Broadly, the basic principle behind this strategy is to encapsulate therapeutic agents in a polymeric drug delivery system (DDS) for diffusion- and/or degradation-controlled release, whereby degradation can occur by hydrolysis or tied to relevant microenvironmental cues such as pH, reactive oxygen species (ROS), and protease activity. In this review, we highlight the development of clinically tested IA therapies for OA and highlight recent systems which have been investigated preclinically. DDS strategies including hydrogels, liposomes, polymeric microparticles (MPs) and nanoparticles (NPs), drug conjugates, and combination systems are introduced and evaluated for clinical translational potential.

Polymeric Nanoparticle-Based Vaccine Adjuvants and Delivery Vehicles

As vaccine formulations have progressed from including live or attenuated strains of pathogenic components for enhanced safety, developing new adjuvants to more effectively generate adaptive immune responses has become necessary. In this context, polymeric nanoparticles have emerged as a promising platform with multiple advantages, including the dual capability of adjuvant and delivery vehicle, administration via multiple routes, induction of rapid and long-lived immunity, greater shelf-life at elevated temperatures, and enhanced patient compliance. This comprehensive review describes advances in nanoparticle-based vaccines (i.e., nanovaccines) with a particular focus on polymeric particles as adjuvants and delivery vehicles. Examples of the nanovaccine approach in respiratory infections, biodefense, and cancer are discussed.

Applications of Nanovaccines for Disease Prevention in Cattle

Vaccines are one of the most important tools available to prevent and reduce the incidence of infectious diseases in cattle. Despite their availability and widespread use to combat many important pathogens impacting cattle, several of these products demonstrate variable efficacy and safety in the field, require multiple doses, or are unstable under field conditions. Recently, nanoparticle-based vaccine platforms (nanovaccines) have emerged as promising alternatives to more traditional vaccine platforms. In particular, polymer-based nanovaccines provide sustained release of antigen payloads, stabilize such payloads, and induce enhanced antibod- and cell-mediated immune responses, both systemically and locally. To improve vaccine administrative strategies and efficacy, they can be formulated to contain multiple antigenic payloads and have the ability to protect fragile proteins from degradation. Nanovaccines are also stable at room temperature, minimizing the need for cold chain storage. Nanoparticle platforms can be synthesized for targeted delivery through intranasal, aerosol, or oral administration to induce desired mucosal immunity. In recent years, several nanovaccine platforms have emerged, based on biodegradable and biocompatible polymers, liposomes, and virus-like particles. While most nanovaccine candidates have not yet advanced beyond testing in rodent models, a growing number have shown promise for use against cattle infectious diseases. This review will highlight recent advancements in polymeric nanovaccine development and the mechanisms by which nanovaccines may interact with the bovine immune system. We will also discuss the positive implications of nanovaccines use for combating several important viral and bacterial disease syndromes and consider important future directions for nanovaccine development in beef and dairy cattle.

Discontinuous Dewetting in a Degassed Mold for Fabrication of Homogeneous Polymeric Microparticles

Discontinuous dewetting (DD) is an attractive technique that enables the production of large liquid arrays in microwells and is applicable to the synthesis of anisotropic microparticles with complex morphologies. However, such loading of liquids into microwells presents a significant challenge, as the liquids used in this technique should exhibit low mold surface wettability. This study introduces DD in a degassed mold (DM), a simple yet powerful technique that achieves uniform loading of microparticle precursors into large microwell arrays within 1 min. Using this technique, hydrogel microparticles are produced by different polymerization mechanisms with various shapes and sizes, ranging from a few micrometers to hundreds of micrometers. Hydrophobic oil microparticles are produced by the simple plasma treatment of the DM, and agarose microparticles encapsulating bovine serum albumin (in a well-dispersed state) are produced by submerging the DM in fluorinated oil. To demonstrate additional functionality of microparticles using this technique, high concentrations of magnetic nanoparticles are loaded into microparticles for particle-based immunoassays performed in a microwell plate, and the immunoassay performance is comparable to that of ELISA.

Recent Advances in Microfluidics for the Preparation of Drug and Gene Delivery Systems

Drug delivery systems (DDSs) have great potential for improving the treatment of several diseases, especially microbial infections and cancers. However, the formulation procedures of DDSs remain challenging, especially at the nanoscale. Reducing batch-to-batch variation and enhancing production rate are some of the essential requirements for accelerating the translation of DDSs from a small scale to an industrial level. Microfluidic technologies have emerged as an alternative to the conventional bench methods to address these issues. By providing precise control over the fluid flows and rapid mixing, microfluidic systems can be used to fabricate and engineer different types of DDSs with specific properties for efficient delivery of a wide range of drugs and genetic materials. This review discusses the principles of controlled rapid mixing that have been employed in different microfluidic strategies for producing DDSs. Moreover, the impact of the microfluidic device design and parameters on the type and properties of DDS formulations was assessed, and recent applications in drug and gene delivery were also considered.

Multidimensional Anisotropic Architectures on Polymeric Microparticles

Next generation life science technologies will require the integration of building blocks with tunable physical and chemical architectures at the microscale. A central issue is to govern the multidimensional anisotropic space that defines these microparticle attributes. However, this control is limited to one or few dimensions due to profound fabrication tradeoffs, a problem that is exacerbated by miniaturization. Here, a vast number of anisotropic dimensions are integrated combining SU-8 photolithography with (bio)chemical modifications via soft-lithography. Microparticles in a 15-D anisotropic space are demonstrated, covering branching, faceting, fiducial, topography, size, aspect ratio, stiffness, (bio)molecular and quantum dot printing, top/bottom surface coverage, and quasi-0D, 1D, 2D, and 3D surface patterning. The strategy permits controlled miniaturization on physical dimensions below 1 µm and molecular patterns below 1 µm² . By combining building blocks, anisotropic microparticles detect pH changes, form the basis for a DNA-assay recognition platform, and obtain an extraordinary volumetric barcoding density up to 1093 codes µm^-3 in a 3 × 12 × 0.5 µm³ volume.

Computational studies of shape control of charged deformable nanocontainers

Biological matter is often compartmentalized by soft membranes that dynamically change their shape in response to chemical and mechanical cues. Deformable soft-matter-based nanoscale membranes or nanocontainers that mimic this behavior can be used as drug-delivery carriers that can adapt to evolving physiological conditions, or as dynamic building blocks for the design of novel hierarchical materials via assembly engineering. Here, we connect the intrinsic features of charged deformable nanocontainers such as their size, charge, surface tension, and elasticity with their equilibrium shapes for a wide range of solution conditions using molecular dynamics simulations. These links identify the fundamental mechanisms that establish the chemical and materials design control strategies for modulating the equilibrium shape of these nanocontainers. We show that flexible nanocontainers of radii ranging from 10-20 nm exhibit sphere-to-rod-to-disc shape transitions yielding rods and discs over a wide range of aspect ratio λ (0.3 < λ < 5). The shape transitions can be controlled by tuning salt and/or surfactant concentration as well as material elastic parameters. The shape changes are driven by reduction in the global electrostatic energy and are associated with dramatic changes in local surface elastic energy distributions. To illustrate the shape transition mechanisms, exact analytical calculations for idealized spheroidal nanocontainers in salt-free conditions are performed. Explicit counterion simulations near nanocontainers and associated Manning model calculations provide an assessment of the stability of observed shape deformations in the event of ion condensation.

The Influence of Nanoparticle Properties on Oral Bioavailability of Drugs

Oral administration has been the most common therapeutic regimen in various diseases because of its high safety, convenience, lower costs, and high compliance of patients. However, susceptible in hostile gastrointestinal (GI) environment, many drugs show poor permeability across GI tract mucus and intestinal epithelium with poor oral absorption and limited therapeutic efficacy. In recent years, nanoparticulate drug delivery systems (NDDS) have become a hot research spot because of their unique advantages including protecting drug from premature degrading and interacting with the physiological environment, increasing intracellular penetration, and enhancing drug absorption. However, a slight change in physicochemistry of nanoparticles can significantly impact their interaction with biological pathways and alter the oral bioavailability of drugs. Hence, this review focuses on the factors affecting oral bioavailability from two aspects. On the one hand, the factors are the biochemical and physiological barriers in oral drugs delivery. On the other hand, the factors are the nanoparticle properties including size, surface properties, and shape of nanoparticles.

Supported Membrane Platform to Assess Surface Interactions between Extracellular Vesicles and Stromal Cells

Extracellular vesicles (EVs) are membrane-encapsulated particles secreted by eukaryotic cells that stimulate cell communication and horizontal cargo exchange. EV interactions with stromal cells can result in molecular changes in the recipient cell and, in some cases, lead to disease progression. However, mechanisms leading to these changes are poorly understood. A few model systems are available for studying the outcomes of surface interactions between EV membranes with stromal cells. Here, we created a hybrid supported bilayer incorporating EVs membrane material, called an extracellular vesicle supported bilayer, EVSB. Using EVSBs, we investigated the surface interactions between breast cancer EVs and adipose-derived stem cells (ADSCs) by culturing ADSCs on EVSBs and analyzing cell adhesion, spreading, viability, vascular endothelial growth factor (VEGF) secretion, and myofibroblast differentiation. Results show that cell viability, adhesion, spreading, and proangiogenic activity were enhanced, conditions that promote oncogenic activity, but cell differentiation was not. This model system could be used to develop therapeutic strategies to limit EV-ADSC interactions and proangiogenic conditions. Finally, this model system is not limited to the study of cancer but can be used to study surface interactions between EVs from any origin and any target cell to investigate EV mechanisms leading to cellular changes in other diseases.

Silver nanoparticles: Synthesis, medical applications and biosafety

Silver nanoparticles (AgNPs) have been one of the most attractive nanomaterials in biomedicine due to their unique physicochemical properties. In this paper, we review the state-of-the-art advances of AgNPs in the synthesis methods, medical applications and biosafety of AgNPs. The synthesis methods of AgNPs include physical, chemical and biological routes. AgNPs are mainly used for antimicrobial and anticancer therapy, and also applied in the promotion of wound repair and bone healing, or as the vaccine adjuvant, anti-diabetic agent and biosensors. This review also summarizes the biological action mechanisms of AgNPs, which mainly involve the release of silver ions (Ag+), generation of reactive oxygen species (ROS), destruction of membrane structure. Despite these therapeutic benefits, their biological safety problems such as potential toxicity on cells, tissue, and organs should be paid enough attention. Besides, we briefly introduce a new type of Ag particles smaller than AgNPs, silver Ångstrom (Å, 1 Å = 0.1 nm) particles (AgÅPs), which exhibit better biological activity and lower toxicity compared with AgNPs. Finally, we conclude the current challenges and point out the future development direction of AgNPs.

Enzyme-assisted mineralization of calcium phosphate: exploring confinement for the design of highly crystalline nano-objects

In hard tissues of vertebrates, calcium phosphate (CaP) biomineralization is a fascinating process that combines specific physicochemical and biochemical reactions, resulting in the formation of extracellular matrices with elegant nanoarchitectures. Although several "biomimetic" strategies have been developed for the design of mineralized nanostructured biointerfaces, the control of the crystallization process remains complex. Herein, we report an innovative approach to overcome this challenge by generating, in situ, CaP precursors in a confined medium. For this purpose, we explore a combination of (i) the layer-by-layer assembly, (ii) the template-based method and (iii) the heterogeneous enzymatic catalysis. We show the possibility of embedding active alkaline phosphatase in a nanostructured multilayered film and inducing the nucleation and growth of CaP compounds under different conditions. Importantly, we demonstrate that the modulation of the crystal phase from spheroid-shaped amorphous CaP to crystalline platelet-shaped hydroxyapatite depends on the degree of confinement of active enzymes. This leads to the synthesis of highly anisotropic mineralized nanostructures that are mechanically stable and with controlled dimensions, composition and crystal phase. The present study provides a straightforward, yet powerful, way to design anisotropic nanostructured materials, including a self-supported framework, which may be used in broad biomedical applications.

Design of an amphiphilic hyperbranched core/shell-type polymeric nanocarrier platform for drug delivery

An amphiphilic core/shell-type polymer-based drug carrier system (HPAE- PCL-b -MPEG), composed of hyperbranched poly(aminoester)-based polymer (HPAE) as the core building block and poly(ethylene glycol)-b - poly(ε-caprolactone) diblock polymers (MPEG-b -PCL) as the shell building block, was designed. The synthesized polymers were characterized with FTIR, 1 H NMR, 13 C NMR, and GPC analysis. Monodisperse HPAE-PCL-b - MPEG nanoparticles with dimensions of < 200 nm and polydispersity index of < 0.5 were prepared by nanoprecipitation method and characterized with SEM, particle size, and zeta potential analysis. 5-Fluorouracil was encapsulated within HPAE-PCL-b -MPEG nanoparticles. In vitro drug release profiles and cytotoxicity of blank and 5-fluorouracil-loaded nanoparticles were examined against the human colon cancer HCT116 cell line. All results suggest that HPAE-PCL-b - MPEG nanoparticles offer an alternative and effective drug nanocarrier system for drug delivery applications.

Degassed micromolding lithography for rapid fabrication of anisotropic hydrogel microparticles with high-resolution and high uniformity

Replica molding techniques, which are used to synthesize microparticles inside anisotropic micromolds, have been developed to enable the mass production of hydrogel particles. However, these techniques are limited in their ability to synthesize only a narrow range of particle compositions and shapes because of the difficulty in loading precursors into the micromolds as well as the low particle homogeneity due to the uneven evaporation of the precursors. Herein, we describe a simple yet powerful technique, called degassed micromolding lithography, which can load precursors within 1 min regardless of the wettability. This technique is based on the gas-solubility of a degassed micromold that acts as a suction pump to completely fill the mold by drawing precursor liquids in. The semi-closed system within the micromold prevents the uneven evaporation of the precursor, which is essential for the production of homogeneous particles. Furthermore, controlled uniformity of the hydrogel microparticles (C.V. < 2%) can be achieved by engineering the design of the micromold array.

Is aggregated synthetic amorphous silica toxicologically relevant?

BACKGROUND

The regulatory definition(s) of nanomaterials (NMs) frequently uses the term 'agglomerates and aggregates' (AA) despite the paucity of evidence that AA are significantly relevant from a nanotoxicological perspective. This knowledge gap greatly affects the safety assessment and regulation of NMs, such as synthetic amorphous silica (SAS). SAS is used in a large panel of industrial applications. They are primarily produced as nano-sized particles (1-100 nm in diameter) and considered safe as they form large aggregates (> 100 nm) during the production process. So far, it is indeed believed that large aggregates represent a weaker hazard compared to their nano counterpart. Thus, we assessed the impact of SAS aggregation on in vitro cytotoxicity/biological activity to address the toxicological relevance of aggregates of different sizes.

RESULTS

We used a precipitated SAS dispersed by different methods, generating 4 ad-hoc suspensions with different aggregate size distributions. Their effect on cell metabolic activity, cell viability, epithelial barrier integrity, total glutathione content and, IL-8 and IL-6 secretion were investigated after 24 h exposure in human bronchial epithelial (HBE), colon epithelial (Caco2) and monocytic cells (THP-1). We observed that the de-aggregated suspension (DE-AGGR), predominantly composed of nano-sized aggregates, induced stronger effects in all the cell lines than the aggregated suspension (AGGR). We then compared DE-AGGR with 2 suspensions fractionated from AGGR: the precipitated fraction (PREC) and the supernatant fraction (SuperN). Very large aggregates in PREC were found to be the least cytotoxic/biologically active compared to other suspensions. SuperN, which contains aggregates larger in size (> 100 nm) than in DE-AGGR but smaller than PREC, exhibited similar activity as DE-AGGR.

CONCLUSION

Overall, aggregation resulted in reduced toxicological activity of SAS. However, when comparing aggregates of different sizes, it appeared that aggregates > 100 nm were not necessarily less cytotoxic than their nano-sized counterparts. This study suggests that aggregates of SAS are toxicologically relevant for the definition of NMs.

Biomimic strategies for modulating the interaction between particle adjuvants and antigen-presenting cells

The design strategies of particle adjuvants by mimicking natural pathogens to strengthen their interaction with antigen-presenting cells.

Patterned Surface Energy in Elastomeric Molds as a Generalized Approach to Polymer Particle Fabrication

We present a generic fabrication scheme to produce polymer microparticles with engineerable, complex shapes. The polymer particles are made from polyethylene glycol based hydrogels using a poly(dimethylsiloxane) (PDMS) molding technique. A simple surface treatment is used to pattern the surface energy of the PDMS molds, engendering the recessed wells in the molds with a higher surface energy than that of the surface. The contrast in surface energy causes hydrogel precursor to wet only the inside of the molds, creating isolated particles after curing with UV light. This eliminates the formation of an interconnecting "scum" layer and allows for fabrication of well-defined, independent particles. We discuss resolution limits for the approach and present a simple strategy for releasing the particles. Finally, to show how the fabrication technique is inherently compatible with further particle modifications, we also demonstrate magnetic functionalization of particles.

Efficient nanocarriers of siRNA therapeutics for cancer treatment

Nanocarriers as drug delivery systems are promising and becoming popular, especially for cancer treatment. In addition to improving the pharmacokinetics of poorly soluble hydrophobic drugs by solubilizing them in a hydrophobic core, nanocarriers allow cancer-specific combination drug deliveries by inherent passive targeting phenomena and adoption of active targeting strategies. Nanoparticle-drug formulations can enhance the safety, pharmacokinetic profiles, and bioavailability of locally or systemically administered drugs, leading to improved therapeutic efficacy. Gene silencing by RNA interference (RNAi) is rapidly developing as a personalized field of cancer treatment. Small interfering RNAs (siRNAs) can be used to switch off specific cancer genes, in effect, "silence the gene, silence the cancer." siRNA can be used to silence specific genes that produce harmful or abnormal proteins. The activity of siRNA can be used to harness cellular machinery to destroy a corresponding sequence of mRNA that encodes a disease-causing protein. At present, the main barrier to implementing siRNA therapies in clinical practice is the lack of an effective delivery system that protects the siRNA from nuclease degradation, delivers to it to cancer cells, and releases it into the cytoplasm of targeted cancer cells, without creating adverse effects. This review provides an overview of various nanocarrier formulations in both research and clinical applications with a focus on combinations of siRNA and chemotherapeutic drug delivery systems for the treatment of multidrug resistant cancer. The use of various nanoparticles for siRNA-drug delivery, including liposomes, polymeric nanoparticles, dendrimers, inorganic nanoparticles, exosomes, and red blood cells for targeted drug delivery in cancer is discussed.