Biocompatible Injectable Hydrogel with Potent Wound Healing and Antibacterial Properties

Biocompatible hydrogels based on quaternary ammonium salts of chitosan with high antimicrobial activity as biocidal agents for disinfection

The paper reports new hydrogels based on quaternary ammonium salts of chitosan designed as biocidal products. The chitosan derivative was crosslinked with salicylaldehyde via reversible imine bonds and supramolecular self-assemble to give dynamic hydrogels which respond to environmental stimuli. The crosslinking mechanism was demonstrated by 1H NMR and FTIR spectroscopy, and X-ray diffraction and polarized light microscopy. The hydrogel nature, self-healing and thixotropy were proved by rheological investigation and visual observation, and their morphology was assessed by scanning electron microscopy. The relevant properties for application as biocidal products, such as swelling, dissolution, bioadhesiveness, antimicrobial activity and ex-vivo hemocompatibility and in vivo local toxicity and biocompatibility on experimental mice were measured and analyzed in relationship with the imination degree and the influence of each component. It was found that the hydrogels are superabsorbent, have good adhesivity to skin and various surfaces and antimicrobial activity against relevant gram-positive and gram-negative bacteria, while being hemocompatible and biocompatible. Besides, the hydrogels are easily biodegraded in soil. All these properties recommend the studied hydrogels as ecofriendly biocidal agents for living tissues and surfaces, but also open the perspectives of their use as platform for in vivo applications in tissue engineering, wound healing, or drug delivery systems.

FTIR determination of the degree of molar substitution for hydroxypropyl chitosan

We developed and validated a novel Fourier transform infrared (FTIR) method to determine the degree of molar substitution (MS) for hydroxypropyl chitosan (HPCS) using nuclear magnetic resonance (1H NMR) as a reference, and investigated the factors influencing the MS assay. Through extensive screening of integration methods for candidate bands in the FTIR spectrum of HPCS using 20 HPCS samples with degrees of acetylation (DA) ranging from 0.003 to 0.139, we found that when using band area at 2970 cm-1 as a probe integral, the MS values obtained via the 1H NMR method exhibited linear correlations (R2 > 0.98) with at least 16 integral ratios derived from their FTIR spectra. The optimal reference bands with high reliability are located at 3440 cm-1 and 1415 cm-1, with R2 exceeding 0.99 and a MS range of 0.17-1.92. The band at 2875 cm-1 is less affected by the trace moisture present in HPCS samples than the others. The results of the method validation demonstrated a mean recovery of 98.9 ± 2.8 % and an RSD below 10 %, suggesting a simple, robust, and highly accurate and precise method. This method could be extendable for the determination of the MS of insoluble HPCS derivatives and other hydroxypropylated polysaccharides.

Gelatin‑sodium alginate composite hydrogel doped with black phosphorus@ZnO heterojunction for cutaneous wound healing with antibacterial, immunomodulatory, and angiogenic properties

Hydrogels with novel antimicrobial properties and accelerated wound healing are of great interest in the field of wound dressings because they not only prevent bacterial infections but also fulfill the essential needs of wound healing. In this study, multifunctional hydrogel dressings consisting of black phosphorus nanosheets(BPNS) surface-modified Zinc oxide (BP@ZnO heterojunction) based on gelatin (Gel), sodium alginate (SA), glutamine transferase (mTG), and calcium ions with a three-dimensional crosslinked network were prepared. The BP@ZnO-Gel/SA hydrogel has excellent mechanical properties, hemocompatibility (hemolysis rate: 3.29 %), swelling rate(832.8 ± 19.2 %), cytocompatibility, photothermal and photodynamic antibacterial properties(Sterilization rate: 96.4 ± 3.3 %). In addition, the hydrogel accelerates wound healing by promoting cell migration, immune regulation and angiogenesis. Thus, this hydrogel achieves the triple effect of antimicrobial, immunomodulation and angiogenesis, and is a tissue engineering strategy with great potential.

Fabrication of chitin-fibrin hydrogels to construct the 3D artificial extracellular matrix scaffold for vascular regeneration and cardiac tissue engineering

As the cornerstone of tissue engineering and regeneration medicine research, developing a cost-effective and bionic extracellular matrix (ECM) that can precisely modulate cellular behavior and form functional tissue remains challenging. An artificial ECM combining polysaccharides and fibrillar proteins to mimic the structure and composition of natural ECM provides a promising solution for cardiac tissue regeneration. In this study, we developed a bionic hydrogel scaffold by combining a quaternized β-chitin derivative (QC) and fibrin-matrigel (FM) in different ratios to mimic a natural ECM. We evaluated the stiffness of those composite hydrogels with different mixing ratios and their effects on the growth of human umbilical vein endothelial cells (HUVECs). The optimal hydrogels, QCFM1 hydrogels were further applied to load HUVECs into nude mice for in vivo angiogenesis. Besides, we encapsulated human pluripotent stem cell-derived cardiomyocytes (hPSC-CMs) into QCFM hydrogels and employed 3D bioprinting to achieve batch fabrication of human-engineered heart tissue (hEHT). Finally, the myocardial structure and electrophysiological function of hEHT were evaluated by immunofluorescence and optical mapping. Designed artificial ECM has a tunable modulus (220-1380 Pa), which determines the different cellular behavior of HUVECs when encapsulated in these. QCFM1 composite hydrogels with optimal stiffness (800 Pa) and porous architecture were finally identified, which could adapt for in vitro cell spreading and in vivo angiogenesis of HUVECs. Moreover, QCFM1 hydrogels were applied in 3D bioprinting successfully to achieve batch fabrication of both ring-shaped and patch-shaped hEHT. These QCFM1 hydrogels-based hEHTs possess organized sarcomeres and advanced function characteristics comparable to reported hEHTs. The chitin-derived hydrogels are first used for cardiac tissue engineering and achieve the batch fabrication of functionalized artificial myocardium. Specifically, these novel QCFM1 hydrogels provided a reliable and economical choice serving as ideal ECM for application in tissue engineering and regeneration medicine.

Multibiofunctional Self-healing Adhesive Injectable Nanocomposite Polysaccharide Hydrogel

Injectable hydrogels with good antimicrobial and antioxidant properties, self-healing characteristics, suitable mechanical properties, and therapeutic effects have great practical significance for developing treatments for pressing healthcare challenges. Herein, we have designed a novel, self-healing injectable hydrogel composite incorporating cross-linked biofunctional nanomaterials by mixing alginate aldehyde (Ox-Alg), quaternized chitosan (QCS), adipic acid dihydrazide (ADH), and copper oxide nanosheets surface functionalized with folic acid as the bioligand (F-CuO). Gelation was achieved under physiological conditions via the dynamic Schiff base cross-linking mechanism. The developed nanocomposite injectable hydrogel demonstrated the fast self-healing ability essential to bear deformation and outstanding antibacterial properties along with ROS scavenging ability. Furthermore, the optimized formulation of our F-CuO-embedded injectable hydrogel exhibited excellent cytocompatibility, blood compatibility, and in vitro wound healing performance. Taken together, the F-CuO nanosheet cross-linked injectable hydrogel composite presented herein offers a promising candidate biomaterial with multifunctional properties to develop solutions for addressing clinical challenges.

Injectable Hydrogels: A Paradigm Tailored with Design, Characterization, and Multifaceted Approaches

Biomaterials denoting self-healing and versatile structural integrity are highly curious in the biomedicine segment. The injectable and/or printable 3D printing technology is explored in a few decades back, which can alter their dimensions temporarily under shear stress, showing potential healing/recovery tendency with patient-specific intervention toward the development of personalized medicine. Thus, self-healing injectable hydrogels (IHs) are stunning toward developing a paradigm for tissue regeneration. This review comprises the designing of IHs, rheological characterization and stability, several benchmark consequences for self-healing IHs, their translation into tissue regeneration of specific types, applications of IHs in biomedical such as anticancer and immunomodulation, wound healing and tissue/bone regeneration, antimicrobial potentials, drugs, gene and vaccine delivery, ocular delivery, 3D printing, cosmeceuticals, and photothermal therapy as well as in other allied avenues like agriculture, aerospace, electronic/electrical industries, coating approaches, patents associated with therapeutic/nontherapeutic avenues, and numerous futuristic challenges and solutions.

Functionalized chitosan based antibacterial hydrogel sealant for simultaneous infection eradication and tissue closure in ocular injuries

Management of infections at ocular injury often requires prolonged and high dose of antibiotic, which is associated with challenges of antibiotic resistance and bacterial biofilm formation. Tissue glues are commonly used for repairing ocular tissue defects and tissue regeneration, but they are ineffective in curing infection. There is a critical need for antibacterial ocular bio-adhesives capable of both curing infection and aiding wound closure. Herein, we present the development of an imine crosslinked N-(2-hydroxypropyl)-3-trimethylammonium chitosan chloride (HTCC)‑silver chloride nanocomposites (QAm1-Agx) and poly-dextran aldehyde (PDA) based bactericidal sealant (BacSeal). BacSeal exhibited potent bactericidal activity against a broad spectrum of bacteria including their planktonic and stationary phase within a short duration of 4 h. BacSeal effectively reduced biofilm-embedded MRSA and Pseudomonas aeruginosa by ∼99.99 %. In ex-vivo human cornea infection model, BacSeal displayed ∼99 % reduction of ocular infection. Furthermore, the hydrogel exhibited excellent sealing properties by maintaining ocular pressure up to 75 mm-Hg when applied to human corneal trauma. Cytotoxicity assessment and hydrogel-treated human cornea with a retained tissue structure, indicate its non-toxic nature. Collectively, BacSeal represents a promising candidate for the development of an ocular sealant that can effectively mitigate infections and may assist in tissue regeneration by sealing ocular wounds.

Injectable Self-Healing Antibacterial Hydrogels with Tailored Functions by Loading Peptide Nanofiber-Biomimetic Silver Nanoparticles

Polymer hydrogels find extensive application in biomedicine, serving specific purposes such as drug delivery, biosensing, bioimaging, cancer therapy, tissue engineering, and others. In response to the growing threat of bacterial infections and the escalating resistance to conventional antibiotics, this research introduces a novel injectable, self-healing antimicrobial hydrogel comprising bioactive aldolized hyaluronic acid (AHA) and quaternized chitosan (QCS). This designed QCS/AHA hydrogel incorporates self-assembling peptide nanofibers (PNFs) and small-sized silver nanoparticles (AgNPs) for tailored functionality. The resulting hybrid QCS/AHA/PNF/AgNPs hydrogel demonstrates impressive rheological characteristics, broad-spectrum antimicrobial efficacy, and high biocompatibility. Notably, its antimicrobial effectiveness against Escherichia coli and S. aureus surpasses 99.9%, underscoring its potential for treating infectious wounds. Moreover, the rheological analysis confirms its excellent shear-thinning and self-healing properties, enabling it to conform closely to irregular wound surfaces. Furthermore, the cytotoxicity assessment reveals its compatibility with human umbilical vein endothelial cells, exhibiting no significant adverse effects. The combined attributes of this bioactive QCS/AHA/PNF/AgNPs hydrogel position it as a promising candidate for antimicrobial applications and wound healing.

Assessing the efficacy of curcumin-loaded alginate hydrogel on skin wound healing: A gene expression analysis

Skin tissue engineering has gained significant attention as a promising alternative to traditional treatments for skin injuries. In this study, we developed 3D hydrogel-based scaffolds, Alginate, incorporating different concentrations of Curcumin and evaluated their properties, including morphology, swelling behavior, weight loss, as well as hemo- and cytocompatibility. Furthermore, we investigated the therapeutic potential of Alginate hydrogel containing different amounts of Curcumin using an in vitro wound healing model. The prepared hydrogels exhibited remarkable characteristics, SEM showed that the pore size of hydrogels was 134.64 μm with interconnected pores, making it conducive for cellular infiltration and nutrient exchange. Moreover, hydrogels demonstrated excellent biodegradability, losing 63.5% of its weight over 14 days. In addition, the prepared hydrogels had a stable release of curcumin for 3 days. The results also show the hemocompatibility of prepared hydrogels and a low amount of blood clotting. To assess the efficacy of the developed hydrogels, 3T3 fibroblast growth was examined during various incubation times. The results indicated that the inclusion of Curcumin at a concentration of 0.1 mg/mL positively influenced cellular behavior. The animal study showed that Alginate hydrogel containing 0.1 mg/mL curcumin had high wound closure(more than 80%) after 14 days. In addition, it showed up-regulation of essential wound healing genes, including TGFβ1 and VEGF, promoting tissue repair and angiogenesis. Furthermore, the treated group exhibited down-regulation of MMP9 gene expression, indicating a reduction in matrix degradation and inflammation. The observed cellular responses and gene expression changes substantiate the therapeutic efficacy of prepared hydrogels. Consequently, our study showed the healing effect of alginate-based hydrogel containing Curcumin on skin injuries.

Exploring antimicrobial and biocompatible applications of eco-friendly fluorescent carbon dots derived from fast-food packaging waste transformation

In the face of escalating environmental concerns, particularly the pervasive issue of non-biodegradable fast-food packaging waste, this study introduces a ground-breaking solution that not only addresses waste management but also advances biomedical technology. Utilizing the underexploited resource of Fucoidan, a sulfated polysaccharide from brown algae, we have innovatively transformed fast-food packaging waste into eco-friendly fluorescent carbon dots (FPCDs). These FPCDs were meticulously characterized through advanced techniques like FT-IR, TEM, and XRD, shedding light on their unique structure, morphology, and composition. A significant discovery of this study is the potent antimicrobial properties of these FPCDs, which demonstrate remarkable effectiveness against specific bacterial and fungal strains. This opens new avenues in the realm of biomedical applications, including imaging, drug delivery, and biosensing. Furthermore, extensive toxicity assessments, including the Brine shrimp lethality assay and Adult Artemia toxicity tests, underscore the safety of these nanoparticles, bolstering their applicability in sensitive medical scenarios. Our research presents a compelling dual approach, ingeniously tackling environmental sustainability issues by repurposing waste while simultaneously creating valuable materials for biomedical use. This dual benefit underscores the transformative potential of our approach, setting a precedent in both waste management and medical innovation.

Functional hemostatic hydrogels: design based on procoagulant principles

Uncontrolled hemorrhage results in various complications and is currently the leading cause of death in the general population. Traditional hemostatic methods have drawbacks that may lead to ineffective hemostasis and even the risk of secondary injury. Therefore, there is an urgent need for more effective hemostatic techniques. Polymeric hemostatic materials, particularly hydrogels, are ideal due to their biocompatibility, flexibility, absorption, and versatility. Functional hemostatic hydrogels can enhance hemostasis by creating physical circumstances conducive to hemostasis or by directly interfering with the physiological processes of hemostasis. The procoagulant principles include increasing the concentration of localized hemostatic substances or establishing a physical barrier at the physical level and intervention in blood cells or the coagulation cascade at the physiological level. Moreover, synergistic hemostasis can combine these functions. However, some hydrogels are ineffective in promoting hemostasis or have a limited application scope. These defects have impeded the advancement of hemostatic hydrogels. To provide inspiration and resources for new designs, this review provides an overview of the procoagulant principles of hemostatic hydrogels. We also discuss the challenges in developing effective hemostatic hydrogels and provide viewpoints.

Pyrogallol loaded chitosan-based polymeric hydrogel for controlling Acinetobacter baumannii wound infections: Synthesis, characterization, and topical application

Antibacterial hydrogels have emerged as a promising approach for wound healing, owing to their ability to integrate antibacterial agents into the hydrogel matrix. Benefiting from its remarkable antibacterial and wound-healing attributes, pyrogallol has been introduced into chitosan-gelatin for the inaugural development of an innovative antibacterial polymeric hydrogel tailored for applications in wound healing. Hence, we observed the effectiveness of pyrogallol in inhibiting the growth of A. baumannii, disrupting mature biofilms, and showcasing robust antioxidant activity both in vitro and in vivo. In addition, pyrogallol promoted the migration of human epidermal keratinocytes and exhibited wound healing activity in zebrafish. These findings suggest that pyrogallol holds promise as a therapeutic agent for wound healing. Interestingly, the pyrogallol-loaded chitosan-gelatin (Pyro-CG) hydrogel exhibited enhanced mechanical strength, stability, controlled drug release, biodegradability, antibacterial activity, and biocompatibility. In vivo results established that Pyro-CG hydrogel promotes wound closure and re-epithelialization in A. baumannii-induced wounds in molly fish. Therefore, the prepared Pyro-CG polymeric hydrogel stands poised as a potent and promising agent for wound healing with antibacterial properties. This holds considerable promise for the development of effective therapeutic interventions to address the increasing menace of A. baumannii-induced wound infections.

A photothermally antibacterial Au@Halloysite nanotubes/lignin composite hydrogel for promoting wound healing

The construction of an effective antibacterial micro-environment to prevent infection and biofilm formation is critically important for the design of wound dressings. Herein, a novel hydrogel wound dressing was fabricated by embedding Au nanoparticles-decorated halloysite nanotubes (Au@HNTs) into the lignin-based hydrogel matrix containing polyvinyl alcohol and chitosan. The resulting composite hydrogel, noted as LPC-Au@HNTs, exhibited an excellent photothermal antibacterial activity owing to the embedded Au@HNTs in which Au nanoparticles were generously filled into the lumen of Halloysite nanotubes. The typical sample containing 4 wt% of Au@HNTs in the composite hydrogel (LPC-Au@HNTs4) had good mechanical and photothermal properties. The surface temperature of as-prepared hydrogel increased to 57.59 °C after 5 min upon NIR light irradiation (808 nm) at 1.0 W/cm2. The photothermal effect endowed the hydrogel dressing with excellent antibacterial activity, with significantly enhanced inhibition rates of Escherichia coli (99.00 %) and Staphylococcus aureus (98.88 %). Experiments in a mouse full-thickness skin defect wound model also showed that the hydrogel dressing had a facilitative effect on the repair of traumatic surfaces. This study provides a broadly appliable wound dressing for treating bacteria-infected wounds, greatly contributing to the design of photothermal antibacterial biomedical materials for wound healing.

Progress in injectable hydrogels for the treatment of incompressible bleeding: an update

Uncontrollable haemorrhage from deep, noncompressible wounds remains a persistent and intractable challenge, accounting for a very high proportion of deaths in both war and disaster situations. Recently, injectable hydrogels have been increasingly studied as potential haemostatic materials, highlighting their enormous potential for the management of noncompressible haemorrhages. In this review, we summarize haemostatic mechanisms, commonly used clinical haemostatic methods, and the research progress on injectable haemostatic hydrogels. We emphasize the current status of injectable hydrogels as haemostatic materials, including their physical and chemical properties, design strategy, haemostatic mechanisms, and application in various types of wounds. We discuss the advantages and disadvantages of injectable hydrogels as haemostatic materials, as well as the opportunities and challenges involved. Finally, we propose cutting-edge research avenues to address these challenges and opportunities, including the combination of injectable hydrogels with advanced materials and innovative strategies to increase their biocompatibility and tune their degradation profile. Surface modifications for promoting cell adhesion and proliferation, as well as the delivery of growth factors or other biologics for optimal wound healing, are also suggested. We believe that this paper will inform researchers about the current status of the use of injectable haemostatic hydrogels for noncompressible haemorrhage and spark new ideas for those striving to propel this field forward.

Multifunctional Hydrogels for the Healing of Diabetic Wounds

The healing of diabetic wounds is hindered by various factors, including bacterial infection, macrophage dysfunction, excess proinflammatory cytokines, high levels of reactive oxygen species, and sustained hypoxia. These factors collectively impede cellular behaviors and the healing process. Consequently, this review presents intelligent hydrogels equipped with multifunctional capacities, which enable them to dynamically respond to the microenvironment and accelerate wound healing in various ways, including stimuli -responsiveness, injectable self-healing, shape -memory, and conductive and real-time monitoring properties. The relationship between the multiple functions and wound healing is also discussed. Based on the microenvironment of diabetic wounds, antibacterial, anti-inflammatory, immunomodulatory, antioxidant, and pro-angiogenic strategies are combined with multifunctional hydrogels. The application of multifunctional hydrogels in the repair of diabetic wounds is systematically discussed, aiming to provide guidelines for fabricating hydrogels for diabetic wound healing and exploring the role of intelligent hydrogels in the therapeutic processes.

Polarity-dominated chitosan biguanide hydrochloride-based nanofibrous membrane with antibacterial activity for long-lasting air filtration

Facemasks play a significant role as personal protective equipment during the COVID-19 pandemic, but their longevity is limited by the easy dissipation of electrostatic charge and the accumulation of bacteria. In this study, nanofibrous membranes composed of polyacrylonitrile and chitosan biguanide hydrochloride (PAN@CGH) with remarkable antibacterial characteristics were prepared through the coaxial electrospinning process. Particulate matter could be efficiently captured by the fibrous membrane, up to 98 % or more, via polarity-dominated forces derived from cyano and amino groups. As compared commercial N95 masks, the PAN@CGH was more resistant to a wider variety of disinfection protocols. Additionally, the nanofibrous membrane could kill >99.99 % of both Escherichia coli and Staphylococcus aureus. Based on these characteristics, PAN@CGH nanofibrous membrane was applied to facial mask, which possessed an excellent and long-lasting effect on the capture of airborne particles. This work may be one of the most promising strategies on designing high-performance face masks for public health protection.

Advances in chitosan-based hydrogels for pharmaceutical and biomedical applications: A comprehensive review

The treatment of diseases, such as cancer, is one of the most significant issues correlated with human beings health. Hydrogels (HGs) prepared from biocompatible and biodegradable materials, especially biopolymers, have been effectively employed for the sort of pharmaceutical and biomedical applications, including drug delivery systems, biosensors, and tissue engineering. Chitosan (CS), one of the most abundant bio-polysaccharide derived from chitin, is an efficient biomaterial in the prognosis, diagnosis, and treatment of diseases. CS-based HGs possess some potential advantages, like high values of bioactive encapsulation, efficient drug delivery to a target site, sustained drug release, good biocompatibility and biodegradability, high serum stability, non-immunogenicity, etc., which made them practical and useful for pharmaceutical and biomedical applications. In this review, we summarize recent achievements and advances associated with CS-based HGs for drug delivery, regenerative medicine, disease detection and therapy.

Hydrogels dressings based on guar gum and chitosan: Inherent action against resistant bacteria and fast wound closure

Hydrogels made with depolymerized guar gum, oxidized with theoretical oxidation degrees of 20, 35 and 50 %, were obtained via Schiff's base reaction with N-succinyl chitosan. The materials obtained were subjected to characterization by FT-IR, rheology, swelling, degradation, and morphology. Additionally, their gelation time categorized all three hydrogels as injectable. The materials' swelling degrees in Phosphate-Buffered Saline (PBS) were in the range of 26-35 g of fluid/g gel and their pore size distribution was heterogeneous, with pores varying from 67 to 93 μm. All hydrogels degraded in PBS solution, but maintained around 40 % of their initial mass after 28 days, which was more than enough time for wound healing. The biomaterials were also flexible, self-repairing, adhesive and cytocompatible and presented intrinsic actions, regardless of the presence of additives or antibiotics, against gram-positive (Staphylococcus aureus, Staphylococcus epidermidis) and gram-negative bacteria (Escherichia coli). However, the most pronounced bactericidal effect was against resistant Staphylococcus aureus - MRSA. In vivo assays, performed with 50 % oxidized gum gel, demonstrated that this material exerted anti-inflammatory effects, accelerating the healing process and restoring tissues by approximately 99 % within 14 days. In conclusion, these hydrogels have unique characteristics, making them excellent candidates for wound-healing dressings.

Bioadhesives with Antimicrobial Properties

Bioadhesives with antimicrobial properties enable easier and safer treatment of wounds as compared to the traditional methods such as suturing and stapling. Composed of natural or synthetic polymers, these bioadhesives seal wounds and facilitate healing while preventing infections through the activity of locally released antimicrobial drugs, nanocomponents, or inherently antimicrobial polers. Although many different materials and strategies are employed to develop antimicrobial bioadhesives, the design of these biomaterials necessitates a prudent approach as achieving all the required properties including optimal adhesive and cohesive properties, biocompatibility, and antimicrobial activity can be challenging. Designing antimicrobial bioadhesives with tunable physical, chemical, and biological properties will shed light on the path for future advancement of bioadhesives with antimicrobial properties. In this review, the requirements and commonly used strategies for developing bioadhesives with antimicrobial properties are discussed. In particular, different methods for their synthesis and their experimental and clinical applications on a variety of organs are reviewed. Advances in the design of bioadhesives with antimicrobial properties will pave the way for a better management of wounds to increase positive clinical outcomes.

Injectable organo-hydrogels influenced by click chemistry as a paramount stratagem in the conveyor belt of pharmaceutical revolution

The field of injectable hydrogels has demonstrated a paramount headway in the myriad of biomedical applications and paved a path toward clinical advancements. The innate superiority of hydrogels emerging from organic constitution has exhibited dominance in overcoming the bottlenecks associated with inorganic-based hydrogels in the biological milieu. Inorganic hydrogels demonstrate various disadvantages, including limited biocompatibility, degradability, a cumbersome synthesis process, high cost, and ecotoxicity. The excellent biocompatibility, eco-friendliness, and manufacturing convenience of organo-hydrogels have demonstrated to be promising in therapizing biomedical complexities with low toxicity and augmented bioavailability. This report manifests the realization of biomimetic organo-hydrogels with the development of bioresponsive and self-healing injectable organo-hydrogels in the emerging pharmaceutical revolution. Furthermore, the influence of click chemistry in this regime as a backbone in the pharmaceutical conveyor belt has been suggested to scale up production. Moreover, we propose an avant-garde design stratagem of developing a hyaluronic acid (HA)-based injectable organo-hydrogel via click chemistry to be realized for its pharmaceutical edge. Ultimately, injectable organo-hydrogels that materialize from academia or industry are required to follow the standard set of rules established by global governing bodies, which has been delineated to comprehend their marketability. Thence, this perspective narrates the development of injectable organo-hydrogels via click chemistry as a prospective elixir to have in the arsenal of pharmaceuticals.

Chitin-based hydrogel loaded with bFGF and SDF-1 for inducing endogenous mesenchymal stem cells homing to improve stress urinary incontinence

Nonoperative treatments for Stress Urinary Incontinence (SUI) represent an ideal treatment method. Mesenchymal stem cell (MSCs) treatment is a new modality, but there is a lack of research in the field of gynecological pelvic floor and no good method to induce internal MSC homing to improve SUI. Herein, we develop an injectable and self-healing hydrogel derived from β-chitin which consists of an amino group of quaternized β-chitin (QC) and an aldehyde group of oxidized dextran (OD) between the dynamic Schiff base linkage.it can carry bFGF and SDF-1a and be injected into the vaginal forearm of mice in a non-invasive manner. It provides sling-like physical support to the anterior vaginal wall in the early stages. In the later stage, it slowly releasing factors and promoting the homing of MSCs in vivo, which can improve the local microenvironment, increase collagen deposition, repair the tissue around urethra and finally improve SUI (Scheme 1). This is the first bold attempt in the field of pelvic floor using hydrogel mechanical support combined with MSCs homing and the first application of chitin hydrogel in gynecology. We think the regenerative medicine approach based on bFGF/SDF-1/chitin hydrogel may be an effective non-surgical approach to combat clinical SUI.

Dye-sensitized rare-earth-doped nanoprobe for simultaneously enhanced NIR-II imaging and precise treatment of bacterial infection

Methicillin-resistant Staphylococcus aureus (MRSA) is responsible for causing life-threatening infections that result in high morbidity and mortality rates. The development of advanced imaging and therapeutic methods for in vivo diagnosis and treatment of MRSA infections remains challenging. Here, we develop a hybrid nanoplatform based on rare-earth-doped nanoparticles (RENPs) sensitized by a moiety-engineered near-infrared (NIR) TPEO-820 dye and with a ZIF-8 layer that incorporates CysNO, a photochemically triggered nitric oxide donor. We then use the hybrid for both NIR-II bioimaging and photoactivatable treatment of MRSA-infected wounds. We show that the NIR dye sensitization leads to an 8.5-fold enhancement of the downshifting emission and facilitates deep-tissue NIR-II imaging of bacterial infections. Moreover, the sensitization strategy enhances the UV emission of RENPs by two orders of magnitude, leading to the efficiently controllable release of nitric oxide for effective disinfection of MRSA in vitro and in vivo. The hybrid nanoplatform thus offers promising opportunities for simultaneous localization and controllable treatment of MRSA. STATEMENT OF SIGNIFICANCE: Early detection and treatment of MRSA infections are crucial for reducing public health risks. It is a significant challenge that develops sensitive in vivo diagnosis and complete elimination of drug-resistant bacterial infections. Herein, a nanoplatform has been developed for photoactivatable therapy of MRSA infections and deep tissue NIR-II imaging. This platform utilizes lanthanide-doped rare earth nanoparticles (RENPs) that are sensitized by a moiety-engineered near-infrared (NIR) dye TPEO-820. The TPEO-820 sensitized RENPs exhibit 5 times increase in the release of NO concentration for MRSA treatment compared to unsensitized RENPs, enabling precise therapy of MRSA infection both in vitro and in vivo. Moreover, the platform demonstrates NIR-II luminescence in vivo, allowing for sensitive imaging in deep tissue for MRSA infection.

An additive-free multifunctional β-glucan-peptide hydrogel participates in the whole process of bacterial-infected wound healing

Bacterial infections and excessive inflammation can impede the healing of wounds. Hydrogels have emerged as a promising approach for dressing bacterial-infected injuries. However, some antibacterial hydrogels are complex, costly, and even require assistance with other instruments such as light, making them unsuitable for routine outdoor injuries. Here, we developed an in-situ generating hydrogel via hybridizing oxidized β-D-glucan with antimicrobial peptide C8G2 through the Schiff base reaction. This hydrogel is easily accessible and actively contributes to the whole healing process of bacterial-infected wounds, demonstrating remarkable antibacterial activity and biological compatibility. The pH-sensitive reversible imine bond enables the hydrogel to self-heal and sustainably release the antibacterial peptide, thereby improving its bioavailability and reducing toxicity. Meanwhile, the immunoregulating β-D-glucan inhibits the release of inflammatory factors while promoting the release of anti-inflammatory factors. In methicillin-resistant Staphylococcus aureus (MRSA)-infected full-thickness skin wound models, the hybrid hydrogel showed superior antibacterial and anti-inflammatory activity, enhanced the M2 macrophage polarization, expedited wound closure, and regenerated epidermis tissue. These features make this hydrogel an appealing wound dressing for treating multi-drug-resistant bacteria-infected wounds.

Smart and versatile biomaterials for cutaneous wound healing

The global increase of cutaneous wounds imposes huge health and financial burdens on patients and society. Despite improved wound healing outcomes, conventional wound dressings are far from ideal, owing to the complex healing process. Smart wound dressings, which are sensitive to or interact with changes in wound condition or environment, have been proposed as appealing therapeutic platforms to effectively facilitate wound healing. In this review, the wound healing processes and features of existing biomaterials are firstly introduced, followed by summarizing the mechanisms of smart responsive materials. Afterwards, recent advances and designs in smart and versatile materials of extensive applications for cutaneous wound healing were submarined. Finally, clinical progresses, challenges and future perspectives of the smart wound dressing are discussed. Overall, by mapping the composition and intrinsic structure of smart responsive materials to their individual needs of cutaneous wounds, with particular attention to the responsive mechanisms, this review is promising to advance further progress in designing smart responsive materials for wounds and drive clinical translation.

Synthesis and characterization of Guar gum based biopolymeric hydrogels as carrier materials for controlled delivery of methotrexate to treat colon cancer

Guar Gum has been evaluated for its importance in food and pharmaceutical industry. A blended biopolymeric hydrogel was prepared by solution casting technique using guar gum (GG), chitosan (CS), polyvinyl alcohol (PVA), chemically crosslinked with tetra orthosilicate (TEOS) and impregnated with methotrexate (MTX) to assess its drug carrying capacity against colon cancer (HCT-116). The surface morphology, chemical bonding, hydrophilicity and water absorbing capacity were analyzed by atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), contact angle measurements and swelling properties in variable conditions. Furthermore, degradation, drug release kinetics, hemocompatibility, and cytotoxicity of MTX-loaded hydrogel was tested. The release of MTX from GG/CS/PVA biopolymeric blend occurred in sustained manner. Results displayed that in 7 h 25 min duration 96% of the drug was released in phosphate buffer saline (PBS) at pH 7.4. These blends were non-hemolytic, and antiproliferative against HCT-116. Furthermore, the MTT assay has revealed that MTX-loaded hydrogel had prominently decreased the cell viability (with IC50 11.7 µg/ml) as compared to free MTX (with IC50 21.57 µg/ml). Hence, these results suggest that guar gum based hydrogels are potential biomaterials for colon cancer treatment.

Polymer nanomaterials for use as adjuvant surgical tools

Materials employed in the treatment of conditions encountered in surgical and clinical practice frequently face barriers in translation to application. Shortcomings can be generalized through their reduced mechanical stability, difficulty in handling, and inability to conform or adhere to complex tissue surfaces. To overcome an amalgam of challenges, research has sought the utilization of polymer-derived nanomaterials deposited in various fashions and formulations to improve the application and outcomes of surgical and clinical interventions. Clinically prevalent applications include topical wound dressings, tissue adhesives, surgical sealants, hemostats, and adhesion barriers, all of which have displayed the potential to act as superior alternatives to current materials used in surgical procedures. In this review, emphasis will be placed not only on applications, but also on various design strategies employed in fabrication. This review is designed to provide a broad and thought-provoking understanding of nanomaterials as adjuvant tools for the assisted treatment of pathologies prevalent in surgery. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanoscale Tools and Techniques in Surgery.

Preparation and Properties of Self-Cross-Linking Hydrogels Based on Chitosan Derivatives and Oxidized Sodium Alginate

A self-cross-linking and biocompatible hydrogel has wide application potential in the field of tissue engineering. In this work, an easily available, biodegradable, and resilient hydrogel was prepared using a self-cross-linking method. This hydrogel was composed of N-2-hydroxypropyl trimethyl ammonium chloride chitosan (HACC) and oxidized sodium alginate (OSA). A stable and reversible cross-linking network was formed by the Schiff base self-cross-linked and hydrogen bonding. The addition of a shielding agent (NaCl) may weaken the intense electrostatic effect between HACC and OSA and solve the problem of flocculation caused by the rapid formation of ionic bonds, which provided an extended time for the Schiff base self-cross-linked reaction for forming a homogeneous hydrogel. Interestingly, the shortest time for the formation of the HACC/OSA hydrogel was within 74 s and the hydrogel had a uniform porous structure and enhanced mechanical properties. The HACC/OSA hydrogel withstood large compression deformation due to improved elasticity. What's more, this hydrogel possessed favorable swelling property, biodegradation, and water retention. The HACC/OSA hydrogels have great antibacterial properties against Staphylococcus aureus and Escherichia coli and demonstrated good cytocompatibility as well. The HACC/OSA hydrogels have a good sustained release effect on rhodamine (model drug). Thus, the obtained self-cross-linked HACC/OSA hydrogels in this study have potential applications in the field of biomedical carriers.

Biodegradable hydrogel from pectin and carboxymethyl cellulose with Silibinin loading for lung tumor therapy

Serious side effects of chemotherapy drugs greatly limited the anticancer performance, while targeted drug delivery could improve the therapeutic effect and reduce side effects. In this work, biodegradable hydrogel was fabricated from pectin hydrazide (pec-H) and oxidized carboxymethyl cellulose (DCMC) for localized Silibinin delivery in lung adenocarcinoma treatment. The self-healing pec-H/DCMC hydrogel showed blood compatibility and cell compatibility both in vitro and in vivo, and could be degraded by enzymes. The hydrogel also formed fast fit for injectable applications and showed sustained drug release characteristic sensitive to pH based on acylhydrzone bond cross-linked networks. The Silibinin, as a specific lung cancer inhibiting drug targets TMEM16A ion channel, was loaded into the pec-H/DCMC hydrogel to treat the lung cancer in mice model. The results showed that the hydrogel loaded Silibinin significantly enhanced the anti-tumor efficiency in vivo and greatly reduced the toxicity of the Silibinin. Based on the dual effect of improving efficacy and reducing side effects, the pec-H/DCMC hydrogel with Silibinin loading have broad application prospects to inhibit lung tumor growth in clinic.

Protocatechualdehyde-ferric iron tricomplex embedded gelatin hydrogel with adhesive, antioxidant and photothermal antibacterial capacities for infected wound healing promotion

Because of the indiscriminate use of antibiotics and the increasing threat of drug-resist bacteria, there is an urgent need to develop novel antibacterial strategies to combat infected wounds. In this work, stable tricomplex molecules (PA@Fe) assembled by protocatechualdehyde (PA) and ferric iron (Fe) were successfully synthesized and then embedded in the gelatin matrix to obtain a series of Gel-PA@Fe hydrogels. The embedded PA@Fe served as a crosslinker to improve the mechanical, adhesive and antioxidant properties of hydrogels through coordination bonds (catechol-Fe) and dynamic Schiff base bonds, meanwhile acting as a photothermal agent to convert near-infrared (NIR) light into heat to kill bacteria effectively. Importantly, in vivo evaluation through an infected full-thickness skin wound mice model revealed that Gel-PA@Fe hydrogel developed collagen deposition, and accelerated reconstruction of wound closure, indicating great potential of Gel-PA@Fe hydrogel in promoting the healing process of infected full-thickness wounds.

High-strength, antibacterial, antioxidant, hemostatic, and biocompatible chitin/PEGDE-tannic acid hydrogels for wound healing

Natural polymer hydrogels are widely used in various aspects of biomedical engineering, such as wound repair, owing to their abundance and biosafety. However, the low strength and the lack of function restricted their development and application scope. Herein, we fabricated novel multifunctional chitin/PEGDE-tannic acid (CPT) hydrogels through chemical- and physical-crosslinking strategies, using chitin as the base material, polyethylene glycol diglycidyl ether (PEGDE) and tannic acid (TA) as crosslinking agents, and 90 % ethanol as the regenerative bath. CPT hydrogels maintained a stable three-dimensional porous structure with suitable water contents and excellent biocompatibility. The mechanical properties of hydrogels were greatly improved (tensile stress up to 5.43 ± 1.14 MPa). Moreover, CPT hydrogels had good antibacterial, antioxidant, and hemostatic activities and could substantially promote wound healing in a rat model of full-thickness skin defect by regulating inflammatory responses and promoting collagen deposition and blood vessel formation. Therefore, this work provides a useful strategy to fabricate novel multifunctional CPT hydrogels with excellent mechanical, antibacterial, antioxidant, hemostatic, and biocompatible properties. CPT hydrogels could be promising candidates for wound healing.

Anti-Inflammatory Salidroside Delivery from Chitin Hydrogels for NIR-II Image-Guided Therapy of Atopic Dermatitis

Atopic dermatitis (AD) is the most common heterogeneous skin disease. Currently, effective primary prevention approaches that hamper the occurrence of mild to moderate AD have not been reported. In this work, the quaternized β-chitin dextran (QCOD) hydrogel was adopted as a topical carrier system for topical and transdermal delivery of salidroside for the first time. The cumulative release value of salidroside reached ~82% after 72 h at pH 7.4, while in vitro drug release experiments proved that QCOD@Sal (QCOD@Salidroside) has a good, sustained release effect, and the effect of QCOD@Sal on atopic dermatitis mice was further investigated. QCOD@Sal could promote skin repair or AD by modulating inflammatory factors TNF-α and IL-6 without skin irritation. The present study also evaluated NIR-II image-guided therapy (NIR-II, 1000–1700 nm) of AD using QCOD@Sal. The treatment process of AD was monitored in real-time, and the extent of skin lesions and immune factors were correlated with the NIR-II fluorescence signals. These attractive results provide a new perspective for designing NIR-II probes for NIR-II imaging and image-guided therapy with QCOD@Sal.

Stimuli-Responsive Polysaccharide Hydrogels and Their Composites for Wound Healing Applications

There is a growing concern about wound care, since traditional dressings such as bandages and sutures can no longer meet existing needs. To address the demanding requirements, naturally occurring polymers have been extensively exploited for use in modern wound management. Polysaccharides, being the most abundant biopolymers, have some distinct characteristics, including biocompatibility and biodegradability, which render them ideal candidates for wound healing applications. Combining them with inorganic and organic moieties can produce effective multifunctional composites with the desired mechanical properties, high wound healing efficiencies and excellent antibacterial behavior. Recent research endeavors focus on the development of stimuli-responsive polysaccharide composites for biomedical applications. Polysaccharide composites, being sensitive to the local environment, such as changes of the solution temperature, pH, etc., can sense and react to the wound conditions, thus promoting an effective interaction with the wound. This review highlights the recent advances in stimuli-responsive polysaccharide hydrogels and their composites for use in wound healing applications. The synthetic approaches, physical, chemical, and biochemical properties as well as their function in wound healing will be discussed.

Investigation on wound healing effect of Mediterranean medicinal plants and some related phenolic compounds: A review

ETHNOPHARMACOLOGICAL RELEVANCE

The human skin constitutes a biological barrier against external stress and wounds can reduce the role of its physiological structure. In medical sciences, wounds are considered a major problem that requires urgent intervention. For centuries, medicinal plants have been used in the Mediterranean countries for many purposes and against wounds.

AIM OF THIS REVIEW

Provides an outlook on the Mediterranean medicinal plants used in wound healing. Furthermore, the wound healing effect of polyphenolic compounds and their chemical structures are also summarized. Moreover, we discussed the wound healing process, the structure of the skin, and the current therapies in wound healing.

MATERIALS AND METHODS

The search was performed in several databases such as ScienceDirect, PubMed, Google Scholar, Scopus, and Web of Science. The following Keywords were used individually and/or in combination: the Mediterranean, wound healing, medicinal plants, phenolic compounds, composition, flavonoid, tannin.

RESULTS

The wound healing process is distinguished by four phases, which are respectively, hemostasis, inflammation, proliferation, and remodeling. The Mediterranean medicinal plants are widely used in the treatment of wounds. The finding showed that eighty-nine species belonging to forty families were evaluated for their wound-healing effect in this area. The Asteraceae family was the most reported family with 12 species followed by Lamiaceae (11 species). Tunisia, Egypt, Morocco, and Algeria were the countries where these plants are frequently used in wound healing. In addition to medicinal plants, results showed that nineteen phenolic compounds from different classes are used in wound treatment. Tyrosol, hydroxytyrosol, curcumin, luteolin, chrysin, rutin, kaempferol, quercetin, icariin, morin, epigallocatechin gallate, taxifolin, silymarin, hesperidin, naringin, isoliquiritin, puerarin, genistein, and daidzein were the main compounds that showed wound-healing effect.

CONCLUSION

In conclusion, medicinal plants and polyphenolic compounds provide therapeutic evidence in wound healing and for the development of new drugs in this field.

Bacterial cellulose adhesive patches designed for soft mucosal interfaces

The wet environment in the oral cavity is challenging for topical disease management approaches. The compromised material properties leading to weak adhesion and short retention (<8 h) in such environment result in frequent reapplication of the therapeutics. Composites of bacterial cellulose (BC) and carbene-based bioadhesives attempt to address these shortcomings. Previous designs comprised of aqueous formulations. The current design, for the first time, presents dry, shelf-stable cellulose patches for convenient ready-to-use application. The dry patches simultaneously remove tissue surface hydration while retaining carbene-based photocuring and offers on-demand adhesion. The dry patch prototypes are optimized by controlling BC/adhesive mole ratios and dehydration technique. The adhesion strength is higher than commercial denture adhesives on soft mucosal tissues. The structural integrity is maintained for a minimum of 7 days in aqueous environment. The patches act as selective nanoporous barrier against bacteria while allowing permeation of proteins. The results support the application of BC-based adhesive patches as a flexible platform for wound dressings, drug depots, or combination thereof.

Development of Biocompatible Ciprofloxacin-Gold Nanoparticle Coated Sutures for Surgical Site Infections

Surgical site infections (SSIs) are mainly observed after surgeries that use biomaterials. The aim of this present work was to develop ciprofloxacin hydrochloride (CPH)-loaded gold nanoparticles. These ciprofloxacin-gold nanoparticles were coated onto a sterile surgical suture using an adsorption technique, followed by rigidization via ionotropic crosslinking using sodium alginate. Furthermore, UV-visible spectroscopy, infrared spectroscopy, and scanning electron microscopy were used to characterize the samples. The particle size of the nanoparticles was 126.2 ± 13.35 nm with a polydispersity index of 0.134 ± 0.03, indicating nanosize formation with a monodispersed system. As per the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH) guidelines, stability studies were performed for 30 days under the following conditions: 2-8 °C, 25 ± 2 °C/60 ± 5% RH, and 40 ± 2 °C/75 ± 5% RH. For both Gram-negative and Gram-positive bacteria, the drug-coupled nanoparticle-laden sutures showed a twofold higher zone of inhibition compared with plain drug-coated sutures. In vitro drug release studies showed a prolonged release of up to 180 h. Hemolysis and histopathology studies displayed these sutures' acceptable biocompatibility with the healing of tissue in Albino Swiss mice. The results depict that the use of antibiotic-coated sutures for preventing surgical site infection for a long duration could be a viable clinical option.

Self-Healing Injectable Hydrogels for Tissue Regeneration

Biomaterials with the ability to self-heal and recover their structural integrity offer many advantages for applications in biomedicine. The past decade has witnessed the rapid emergence of a new class of self-healing biomaterials commonly termed injectable, or printable in the context of 3D printing. These self-healing injectable biomaterials, mostly hydrogels and other soft condensed matter based on reversible chemistry, are able to temporarily fluidize under shear stress and subsequently recover their original mechanical properties. Self-healing injectable hydrogels offer distinct advantages compared to traditional biomaterials. Most notably, they can be administered in a locally targeted and minimally invasive manner through a narrow syringe without the need for invasive surgery. Their moldability allows for a patient-specific intervention and shows great prospects for personalized medicine. Injected hydrogels can facilitate tissue regeneration in multiple ways owing to their viscoelastic and diffusive nature, ranging from simple mechanical support, spatiotemporally controlled delivery of cells or therapeutics, to local recruitment and modulation of host cells to promote tissue regeneration. Consequently, self-healing injectable hydrogels have been at the forefront of many cutting-edge tissue regeneration strategies. This study provides a critical review of the current state of self-healing injectable hydrogels for tissue regeneration. As key challenges toward further maturation of this exciting research field, we identify (i) the trade-off between the self-healing and injectability of hydrogels vs their physical stability, (ii) the lack of consensus on rheological characterization and quantitative benchmarks for self-healing injectable hydrogels, particularly regarding the capillary flow in syringes, and (iii) practical limitations regarding translation toward therapeutically effective formulations for regeneration of specific tissues. Hence, here we (i) review chemical and physical design strategies for self-healing injectable hydrogels, (ii) provide a practical guide for their rheological analysis, and (iii) showcase their applicability for regeneration of various tissues and 3D printing of complex tissues and organoids.

Biocompatible Hemostatic Sponge Exhibiting Broad-Spectrum Antibacterial Activity

Hemorrhage during accidents or surgery is a significant challenge that can contribute to mortality. This is further aggravated due to bacterial infections at the injured site. Therefore, rapid application of a hemostatic and antibacterial material is highly necessary as a pretreatment for patients' survival. Herein, we have developed a hemostatic sponge (Hemobac) through amide crosslinking of gelatin and an N-(2-hydroxy) propyl-3-trimethylammonium chitosan (HTCC)-silver chloride nanocomposite (QAm₁-Ag_0.1) to mitigate bacterial infections, while aiding hemostasis. This Hemobac sponge completely eradicated (∼4-5 log) a wide range of Gram-positive and Gram-negative bacteria encompassing various clinical isolates within 6 h. The antihemorrhagic ability of Hemobac was ascertained through SEM images, which exhibited the presence of agglomerated blood cells onto the sponge with a significantly low blood-clotting index value (∼23 ± 1). Notably, Hemobac reduced the blood loss by ∼70-80% in the liver puncture model and femoral vein injury model in mice, displaying its improved hemostatic ability over a marketed gelatin-based sponge. Negligible hemolytic activity (∼6%) and retained healthy morphology of mammalian cells were observed upon exposure to the Hemobac sponge. Minimal immune response was noticed at the Hemobac-treated wound in mice through histopathology analysis. Collectively, these findings indicate that this biocompatible Hemobac sponge can stop the bleeding instantaneously and combat bacterial infections.

A Novel Gelatin-Based Sustained-Release Molluscicide for Control of the Invasive Agricultural Pest and Disease Vector Pomacea canaliculata

Pomacea canaliculata, one of the 100 most destructive invasive species in the world, and it is an important intermediate host of Angiostrongylus cantonensis. The molluscicides in current use are an effective method for controlling snails. However, most molluscicides have no slow-release effect and are toxic to nontarget organisms. Thus, these molluscicides cannot be used on a large scale to effectively act on snails. In this study, gelatin, a safe and nontoxic substance, was combined with sustained-release molluscicide and was found to reduce the toxicity of niclosamide to nontarget organisms. We assessed the effects of gelatin and molluscicide in controlling P. canaliculata snails and eggs. The results demonstrated that the niclosamide retention time with 1.0% and 1.5% gelatin sustained-release agents reached 20 days. Additionally, the mortality rate of P. canaliculata and their eggs increased as the concentration of the niclosamide sustained-release agents increased. The adult mortality rate of P. canaliculata reached 50% after the snails were exposed to gelatin with 0.1 mg/L niclosamide for 48 h. The hatching rate of P. canaliculata was only 28.5% of the normal group after the treatment was applied. The sustained-release molluscicide at this concentration was less toxic to zebrafish, which means that this molluscicide can increase the safety of niclosamide to control P. canaliculata in aquatic environments. In this study, we explored the safety of using niclosamide sustained-release agents with gelatin against P. canaliculata. The results suggest that gelatin is an ideal sustained-release agent that can provide a foundation for subsequent improvements in control of P. canaliculata.

An injectable and biodegradable hydrogel incorporated with photoregulated NO generators to heal MRSA-infected wounds

The development of degradable hydrogel fillers with high antibacterial activity and wound-healing property is urgently needed for the treatment of infected wounds. Herein, an injectable, degradable, photoactivated antibacterial hydrogel (MPDA-BNN6@Gel) was developed by incorporating BNN6-loaded mesoporous polydopamine nanoparticles (MPDA-BNN6 NPs) into a fibrin-based hydrogel. After administration, MPDA-BNN6@Gel created local hyperthermia and released large quantities of NO gas to treat methicillin-resistant Staphylococcus aureus infection under the stimulation of an 808 nm laser. Experiments confirmed that the bacteria were eradicated through irreversible damage to the cell membrane, genetic metabolism, and material energy. Furthermore, in the absence of laser irradition, the fibrin and small amount of NO that originated from MPDA-BNN6@Gel promoted wound healing in vivo. This work indicates that MPDA-BNN6@Gel is a promising alternative for the treatment of infected wounds and provides a facile tactic to design a photoregulated bactericidal hydrogel for accelerating infected wound healing. STATEMENT OF SIGNIFICANCE: The development of a degradable hydrogel with high antibacterial activity and wound-healing property is an urgent need for the treatment of infected wounds. Herein, an injectable, degradable, and photo-activated antibacterial hydrogel (MPDA-BNN6@Gel) has been developed by incorporating BNN6-loaded mesoporous polydopamine nanoparticles (MPDA-BNN6 NPs) into a fibrin-based hydrogel. After administration of MPDA-BNN6@Gel, the MPDA-BNN6@Gel could generate local hyperthermia and release large quantities of NO gas to treat the methicillin-resistant Staphylococcus aureus infection under the irradiation of 808 nm laser. Furthermore, in the absence of a laser, the fibrin and a small amount of NO originating from MPDA-BNN6@Gel could promote wound healing in vivo.

Fast-Forming Dissolvable Redox-Responsive Hydrogels: Exploiting the Orthogonality of Thiol-Maleimide and Thiol-Disulfide Exchange Chemistry

Fast-forming yet easily dissolvable hydrogels (HGs) have potential applications in wound healing, burn incidences, and delivery of therapeutic agents. Herein, a combination of a thiol–maleimide conjugation and thiol–disulfide exchange reaction is employed to fabricate fast-forming HGs which rapidly dissolve upon exposure to dithiothreitol (DTT), a nontoxic thiol-containing hydrophilic molecule. In particular, maleimide disulfide-terminated telechelic linear poly(ethylene glycol) (PEG) polymer and PEG-based tetrathiol macromonomers are employed as gel precursors, which upon mixing yield HGs within a minute. The selectivity of the thiol–maleimide conjugation in the presence of a disulfide linkage was established through ¹H NMR spectroscopy and Ellman’s test. Rapid degradation of HGs in the presence of thiol-containing solution was evident from the reduction in storage modulus. HGs encapsulated with fluorescent dye-labeled dextran polymers and bovine serum albumin were fabricated, and their cargo release was investigated under passive and active conditions upon exposure to DTT. One can envision that the rapid gelation and fast on-demand dissolution under relatively benign conditions would make these polymeric materials attractive for a range of biomedical applications.

Fabrication of Zinc loaded silicon carbide Nanocomposite for in vitro cell viability and in vivo wound dressing care

AIM

In this investigation, Zinc-silicon carbide (Zn-SiC) materials were fabricated by a simple approach by using Zn nanoparticles (Zn-NPs) loaded on silicon carbide (SiC) with enhanced antibacterial and healing activity.

METHODS

Zn-NPs loaded on SiC fabricated by the DIY laser melting technique. The TEM and Zeta-sizer confirmed the morphology and size of the nanoparticles. The characterization was done using Fourier transforms infrared spectroscopy (FTIR), and X-ray diffraction (XRD), Thermogravimetric analysis (TGA). Further, the fabricated nanoparticles were evaluated for their mechanical properties and biocompatibility under storage conditions. In-vivo wound healing was measured by observing a percentage reduction in the wound.

RESULTS

Zn-SiC NPs have 54.6 ± 5.25 nm mean particle size, -15.9 ± 2.35 mV zeta potential with 0.187 ± 0.05 polydispersity index (PD1). The nanoparticles showed good biocompatibility and in-vivo wound healing properties.

CONCLUSIONS

These results strongly support the possibility of using these Zn particles loaded on SiC NPs as a promising wound healing agent after cesarean section.

Photo-crosslinked Antimicrobial Hydrogel Exhibiting Wound Healing Ability and Curing Infections In-vivo

With the increasing focus on healthcare research in the current times, therapeutic and biomaterial interventions for healing of wounds and mitigation of wound-associated infections have seen expedited progress. Conventional approaches consist of release-active gels, which demonstrate leaching of antimicrobials, such as antibiotics, metal ions, etc. However, these systems suffer from the disadvantages of burst release, reservoir exhaustion, and associated toxicity. In this report, we have developed the intrinsically antimicrobial hydrogel (HyDex) by one-pot UV crosslinking of methacrylated dextran (Dex-MA), polyethylene glycol diacrylate (PEG-DA), and cationic lipophilic methacrylate (LipMA) with varied hydrophobic chain which displays broad-spectrum antimicrobial activity, hemostatic ability, and rapid wound closure efficacy. Optimized hydrogel exhibited potent antimicrobial efficacy against multi-drug resistant Gram-positive and Gram-negative bacteria as well as against pathogenic fungus Candida albicans. HyDex hydrogel showed rapid arrest of bleeding in mice liver puncture model. The hydrogel killed carbapenem-resistant Acinetobacter baumannii in a murine model of burn wound infection with >99% reduction in bacterial burden. Furthermore, this hydrogel displayed significant reduction in inflammatory responses, with accelerated wound healing in rat deep wound model. Collectively, these results implied the excellent promise held by lead hydrogel to be developed for tackling deep tissue wounds, notorious infections, and resulting inflammatory responses. This article is protected by copyright. All rights reserved.

Polymeric Biomaterials for Prevention and Therapeutic Intervention of Microbial Infections

The escalating emergence of multidrug-resistant (MDR) pathogens and their ability to colonize into biofilms on a multitude of surfaces have struck global health as a nightmare. The stagnation in the development of antibiotics and the deterioration of clinical pipelines have incited an invigorating search for smart and innovative alternatives in the scientific community. Further, a steep rise in the usage of biomedical devices and implants has resulted in an accelerated occurrence of infections. Toward the goal of mitigation of the aforementioned challenges, antimicrobial polymers have stood out as an astounding option. In this perspective, we highlight our contribution to the field of polymeric biomaterials for tackling antimicrobial resistance (AMR) and infections. Polymers inspired from antimicrobial peptides (AMPs) have been utilized as therapeutic interventions to curb MDR infections and also to rejuvenate obsolete antibiotics. Further, cationic polymers have been used to impart antimicrobial properties to different biomedical surfaces. These cationic polymer-coated surfaces can inactivate pathogens upon contact as well as prevent their biofilm formation. In addition, antimicrobial hydrogels, which are prepared from either inherently antimicrobial polymers or biocide-loaded polymeric hydrogel matrices, have also been engineered. With a brief overview of the progress in the field, detailed elaboration of the polymeric biomaterials for prevention and therapeutic intervention of microbial infections developed by our group is presented. Finally, the challenges in the field of antimicrobial polymers with discussion on the proceedings of polymeric research to alleviate these challenges are discussed.