Role of the Exciton-Polariton in a Continuous-Wave Optically Pumped CsPbBr3 Perovskite Laser

Room-Temperature Polariton Lasing from CdSe Core-Only Nanoplatelets

This paper reports how CdSe core-only nanoplatelets (NPLs) coupled with plasmonic Al nanoparticle lattices can exhibit exciton-polariton lasing. By improving a procedure to synthesize monodisperse 4-monolayer CdSe NPLs, we could resolve polariton decay dynamics and pathways. Experiment and theory confirmed that the system is in the strong coupling regime based on anticrossings in the dispersion diagrams and magnitude of the Rabi-splitting values. Notably, polariton lasing is observed only for cavity lattice periodicities that exhibit specific dispersive characteristics that enable polariton accumulation. The threshold of polariton lasing is 25-fold lower than the reported photon lasing values from CdSe NPLs in similar cavity designs. This open-cavity platform offers a simple approach to control exciton polaritons anticipated to benefit quantum information processing, optoelectronics, and chemical reactions.

Metal-Halide Perovskite Lasers: Cavity Formation and Emission Characteristics

Hybrid metal-halide perovskites (MHPs) have shown remarkable optoelectronic properties as well as facile and cost-effective processability. With the success of MHP solar cells and light-emitting diodes, MHPs have also exhibited great potential as gain media for on-chip lasers. However, to date, stable operation of optically pumped MHP lasers and electrically driven MHP lasers-an essential requirement for MHP laser's insertion into chip-scale photonic integrated circuits-is not yet demonstrated. The main obstacles include the instability of MHPs in the atmosphere, rudimentary MHP laser cavity patterning methods, and insufficient understanding of emission mechanisms in MHP materials and cavities. This review aims to provide a detailed overview of different strategies to improve the intrinsic properties of MHPs in the atmosphere and to establish an optimal MHP cavity patterning method. In addition, this review discusses different emission mechanisms in MHP materials and cavities and how to distinguish them.

Self-Competitive Growth of CsPbBr3 Planar Nanowire Array

Semiconductor planar nanowire arrays (PNAs) are essential for achieving large-scale device integration. Direct heteroepitaxy of PNAs on a flat substrate is constrained by the mismatch in crystalline symmetry and lattice parameters between the substrate and epitaxial nanowires. This study presents a novel approach termed "self-competitive growth" for heteroepitaxy of CsPbBr3 PNAs on mica. The key to inducing the self-competitive growth of CsPbBr3 PNAs on mica involves restricting the nucleation of CsPbBr3 nanowires in a high-adsorption region, which is accomplished by overlaying graphite sheets on the mica surface. Theoretical calculations and experimental results demonstrate that CsPbBr3 nanowires oriented perpendicular to the boundary of the high-adsorption area exhibit greater competitiveness in intercepting the growth of nanowires in the other two directions, resulting in PNAs with a consistent orientation. Moreover, these PNAs exhibit low-threshold and stable amplified spontaneous emission under one-, two-, and three-photon excitation, indicating their potential for an integrated laser array.

Remarkable emission enhancement of CsPbBr3 quantum dots based on an Ag nanoparticle-Ag film plasmonic coupling structure

All-inorganic halide perovskite quantum dots (QDs) have recently received much attention due to their excellent optoelectronic properties. And their emission properties still need to be improved for further applications. Here, we demonstrated a remarkable emission enhancement of the CsPbBr3 QDs based on an Ag nanoparticle-Ag film plasmonic coupling structure. Through precise control of the gap distance between Ag nanoparticle and Ag film, the localized surface plasmon resonance (LSPR) peak was tuned to match the emission wavelength of the CsPbBr3 QDs. We achieved a 30-fold fluorescence intensity enhancement and a lower lasing threshold, which is 25% of that of the CsPbBr3 QDs without plasmonic coupling structure. It is attributed to that the plasmonic coupling structure exhibits an extremely strong local electric field owing to the coupling between LSPR of Ag nanoparticle and surface plasmon polariton of Ag film. This work provides an effective way to enhance the optical emission of perovskite QDs and promotes the further exploration of on-chip light source.

Nonlinear Boost of Optical Angular Momentum Selectivity by Hybrid Nanolaser Circuits

Selective control of light is essential for optical science and technology, with numerous applications. However, optical selectivity in the angular momentum of light has been quite limited, remaining constant by increasing the incident light power on previous passive optical devices. Here, we demonstrate a nonlinear boost of optical selectivity in both the spin and orbital angular momentum of light through near-field selective excitation of single-mode nanolasers. Our designed hybrid nanolaser circuits consist of plasmonic metasurfaces and individually placed perovskite nanowires, enabling subwavelength focusing of angular-momentum-distinctive plasmonic fields and further selective excitation of nanolasers in nanowires. The optically selected nanolaser with a nonlinear increase of light emission greatly enhances the baseline optical selectivity offered by the metasurface from about 0.4 up to near unity. Our demonstrated hybrid nanophotonic platform may find important applications in all-optical logic gates and nanowire networks, ultrafast optical switches, nanophotonic detectors, and on-chip optical and quantum information processing.

High Q-Factor Single-Mode Lasing in Inorganic Perovskite Microcavities with Microfocusing Field Confinement

The realization of high-Q single-mode lasing on the microscale is significant for the advancement of on-chip integrated light sources. It remains a challenging trade-off between Q-factor enhancement and light-field localization to raise the lasing emission rate. Here, we fabricated a zero-dimensional perovskite microcavity integrated with a nondamage pressed microlens to three-dimensionally tailor the intracavity light field and demonstrated linearly and nonlinearly (two-photon) pumped lasing by this microfocusing configuration. Notably, the microlensing microcavity experimentally achieves a high Q-factor (16700), high polarization (99.6%), and high Purcell factor (11.40) single-mode lasing under high-repetition pulse pumping. Three-dimensional light-field confinement formed by the microlens and plate microcavity simultaneously reduces the mode volume (∼3.66 μm3) and suppresses diffraction and transverse walk-off loss, which induces discretization on energy-momentum dispersions and spatial electromagnetic-field distributions. The Q factor and Purcell factor of our lasing come out on top among most of the reported perovskite microcavities, paving a promising avenue toward further studying electrically driven on-chip microlasers.

Observation of transition from superfluorescence to polariton condensation in CsPbBr3 quantum dots film

The superfluorescence effect has received extensive attention due to the many-body physics of quantum correlation in dipole gas and the optical applications of ultrafast bright radiation field based on the cooperative quantum state. Here, we demonstrate not only to observe the superfluorescence effect but also to control the cooperative state of the excitons ensemble by externally applying a regulatory dimension of coupling light fields. A new quasi-particle called cooperative exciton-polariton is revealed in a light-matter hybrid structure of a perovskite quantum dot thin film spin-coated on a Distributed Bragg Reflector. Above the nonlinear threshold, polaritonic condensation occurs at a nonzero momentum state on the lower polariton branch owning to the vital role of the synchronized excitons. The phase transition from superfluorescence to polariton condensation exhibits typical signatures of a decrease of the linewidth, an increase of the macroscopic coherence as well as an accelerated radiation decay rate. These findings are promising for opening new potential applications for super-brightness and unconventional coherent light sources and could enable the exploitation of cooperative effects for quantum optics.

Exploring Epitaxial Structures for Electrically Pumped Perovskite Lasers: A Study of CsPb(Br,I)3 Based on the Ab Initio Bethe-Salpeter Equation

Halide perovskites are widely used as components of electronic and optoelectronic devices such as solar cells, light-emitting diodes (LEDs), optically pumped lasers, field-effect transistors, photodetectors, and γ-detectors. Despite this wide range of applications, the construction of an electrically pumped perovskite laser remains challenging. In this paper, we numerically justify that mixing two perovskite compounds with different halide elements can lead to optical properties suitable for electrical pumping. As a reference, the chosen model material was CsPbBr3, whose performance as a part of lasers has been widely recognised, with some Br atoms substituted by I at specific sites. In particular, a strong enhancement of the low-energy absorption peaks has been obtained using the ab initio Bethe-Salpeter equation. Based on these results, we propose specific architectures of ordered doping that could be realised by epitaxial growth. Efficient light emission from the bottom of the conduction band is expected.

Water-Resistant Subwavelength Perovskite Lasing from Transparent Silica-Based Nanocavity

Great research efforts are devoted to exploring the miniaturization of chip-scale coherent light sources possessing excellent lasing performance. Despite the indispensable role in Si photonics, SiO2 is generally considered not contributing to the starting up and operation of integrated lasers. Here, this work demonstrates an extraordinary-performance subwavelength-scale perovskite vertical cavity laser with all-transparent SiO2 cavity, whose cavity is ultra-simple and composed of only two parallel SiO2 plates. By introducing a ligand-assisted thermally co-evaporation strategy, highly luminescent perovskite film with high reproducibility and excellent optical gain is grown directly on SiO2 . Benefitting from their high-refractive-index contrast, low-threshold, high-quality factor, and single-mode lasing is achieved in subwavelength range of ≈120 nm, and verified by long-range coherence distance (115.6 µm) and high linear polarization degree (82%). More importantly, the subwavelength perovskite laser device could operate in water for 20 days without any observable degradation, exhibiting ultra-stable water-resistant performance. These findings would provide a simple but robust and reliable strategy for the miniaturized on-chip lasers compatible with Si photonics.

Continuous-Wave Lasing in Perovskite LEDs with an Integrated Distributed Feedback Resonator

Realization of electrically pumped laser diodes based on solution-processed semiconductors is a long-standing challenge. Metal halide perovskites have shown great potential toward this goal due to their excellent optoelectronic properties. Continuous-wave (CW) optically pumped lasing in a real electroluminescent device represents a key step to current-injection laser diodes, but it has not yet been realized. This is mainly due to the challenge of incorporating a resonant cavity into an efficient light-emitting diode (LED) able to sustain intensive carrier injection. Here, CW lasing is reported in an efficient perovskite LED with an integrated distributed feedback resonator, which shows a low lasing threshold of 220 W cm-2 at 110 K. Importantly, the LED works well at a current density of 330 A cm-2 , indicating the carrier injection rate already exceeds the threshold of optically pumping. The results suggest that electrically pumped perovskite laser diodes can be achieved once the Joule heating issue is overcome.

Oriented Perovskite Film from Laser Recrystallization in Magnetic Field

The orientation of crystals on the substrate and the presence of defects are critical factors in electro-optic performance. However, technical approaches to guide the orientational crystallization of electro-optical thin films remain challenging. Here, a novel physical method called magnetic-field-assisted pulse laser annealing (MAPLA) for controlling the orientation of perovskite crystals on substrates is reported. By inducing laser recrystallization of perovskite crystals under a magnetic field and with magnetic nanoparticles, the optical and magnetic fields are found to guide the orientational gathering of perovskite units into nanoclusters, resulting in perovskite crystals with preferred lattice orientation in (110) and (220) perpendicular to the substrate. The perovskite crystals obtained by MAPLA exhibit significantly larger grain size and fewer defects compared to those from pulsed laser annealing (PLA) and traditional thermal annealing, resulting in improved carrier lifetime and mobility. Furthermore, MAPLA demonstrates enhanced device performance, increasing responsivity and detectivity by two times, and photocurrent by nearly three orders compared with PLA. The introduction of Fe2 O3 nanoparticles during MAPLA not only improves crystal size and orientation but also significantly enhances long-term stability by preventing Pb2+ reduction. The MAPLA method has great potential for fabricating many electro-optical thin films with desired device properties and stability.

Amplified spontaneous emission from inclusions containing cesium lead bromide in glasses

Cesium lead halide (CsPbX3, X = Cl, Br and I) perovskite nanocrystals embedded glasses exhibit good optical properties and have potential as gain media. However, origins of the amplified spontaneous emission (ASE) from CsPbX3 nanocrystals are controversial. Here, it is found that ASE is from CsPbX3 nanocrystals in inclusions instead of CsPbX3 nanocrystals dispersed in the glass matrix. Inclusions with various sizes are capable of generating ASE, and ASE of the inclusions can sustain at energy densities as high as several tens of mJ/cm2. Thresholds of the fs laser energy densities increase with the increase in fs laser wavelength, and high net optical gain coefficient is obtained.

Toward Nonepitaxial Laser Diodes

Thin-film organic, colloidal quantum dot, and metal halide perovskite semiconductors are all being pursued in the quest for a wavelength-tunable diode laser technology that does not require epitaxial growth on a traditional semiconductor substrate. Despite promising demonstrations of efficient light-emitting diodes and low-threshold optically pumped lasing in each case, there are still fundamental and practical barriers that must be overcome to reliably achieve injection lasing. This review outlines the historical development and recent advances of each material system on the path to a diode laser. Common challenges in resonator design, electrical injection, and heat dissipation are highlighted, as well as the different optical gain physics that make each system unique. The evidence to date suggests that continued progress for organic and colloidal quantum dot laser diodes will likely hinge on the development of new materials or indirect pumping schemes, while improvements in device architecture and film processing are most critical for perovskite lasers. In all cases, systematic progress will require methods that can quantify how close new devices get with respect to their electrical lasing thresholds. We conclude by discussing the current status of nonepitaxial laser diodes in the historical context of their epitaxial counterparts, which suggests that there is reason to be optimistic for the future.

Light Amplification in Fe-Doped CsPbBr3 Crystal Microwire Excited by Continuous-Wave Laser

Electrically pumped halide perovskite laser diodes remain unexplored, and it is widely acknowledged that continuous-wave (CW) lasing will be a crucial step. Here, we demonstrate room-temperature amplified spontaneous emission of Fe-doped CsPbBr₃ crystal microwire excited by a CW laser. Temperature-dependent photoluminescence spectra indicate that the Fe dopant forms a shallow level trap states near the band edge of the lightly doped CsPbBr₃ microcrystal. Pump intensity-dependent time-resolved PL spectra show that the introduced Fe dopant level makes the electron more stable in excited states, suitable for the population inversion. The emission peak intensity of the lightly Fe-doped microwire increases nonlinearly above a threshold of 12.3 kW/cm² under CW laser excitation, indicating a significant light amplification. Under high excitation, the uniform crystal structure and surface outcoupling in Fe-doped perovskite crystal microwires enhanced the spontaneous emission. These results reveal the considerable promise of Fe-doped perovskite crystal microwires toward low-cost, high-performance, room-temperature electrical pumping perovskite lasers.

Ultrahigh-Q Lead Halide Perovskite Microlasers

Lead halide perovskites have been promising platforms for micro- and nanolasers. However, the fragile nature of perovskites poses an extreme challenge to engineering a cavity boundary and achieving high-quality (Q) modes, severely hindering their practical applications. Here, we combine an etchless bound state in the continuum (BIC) and a chemically synthesized single-crystalline CsPbBr₃ microplate to demonstrate on-chip integrated perovskite microlasers with ultrahigh Q factors. By pattering polymer microdisks on CsPbBr₃ microplates, we show that record high-Q BIC modes can be formed by destructive interference between different in-plane radiation from whispering gallery modes. Consequently, a record high Q-factor of 1.04 × 10⁵ was achieved in our experiment. The high repeatability and high controllability of such ultrahigh Q BIC microlasers have also been experimentally confirmed. This research provides a new paradigm for perovskite nanophotonics.

Ligands in Lead Halide Perovskite Nanocrystals: From Synthesis to Optoelectronic Applications

Ligands are indispensable for perovskite nanocrystals (NCs) throughout the whole lifetime, as they not only play key roles in the controllable synthesis of NCs with different sizes and shapes, but also act as capping shell that affects optical properties and electrical coupling of NCs. Establishing a systematic understanding of the relationship between ligands and perovskite NCs is significant to enable many potential applications of NCs. This review mainly focuses on the influence of ligands on perovskite NCs. First of all, the ligands-dominated size and shape control of NCs is discussed. Whereafter, the surface defects of NCs and the bonding between ligands and perovskite NCs are classified, and corresponding post-treatment of surface defects via ligands is also summarized. Furthermore, advances in engineering the ligands towards the high performance of optoelectronic devices based on perovskite NCs, including photodetector, solar cell, light emitting diode (LED), and laser, and finally to potential challenges are also discussed.

Double-Cavity Modulation of Exciton Polaritons in CsPbBr3 Microwire

The lead halide perovskite has become a promising candidate for the study of exciton polaritons due to their excellent optical properties. Here, both experimental and simulated results confirm the existence of two kinds of Fabry-Pérot microcavities in a single CsPbBr₃ microwire with an isosceles right triangle cross section, and we experimentally demonstrate that confined photons in a straight and a folded Fabry-Pérot microcavity are strongly coupled with excitons to form exciton polaritons. Furthermore, we reveal the polarization characteristic and double-cavity modulation of exciton polaritons emission by polarization-resolved fluorescence spectroscopy. Our results not only prove that the modulation of exciton polaritons emission can occur in this simple double-cavity system but also provide a possibility to develop related polariton devices.

Ultralow Threshold Lasing from a Continuous-Wave-Pumped SiNx/CsPbBr3/Ag Thin Film Mediated by the Whispering Gallery Modes of a SiO2 Microsphere

Thin-film pervoskite lasers driven by a continuous wave (CW) laser with ultralow thresholds, which is crucial for the development of on-chip electrically driven lasers, have not yet been realized owing to the low excitation power density of the CW laser. Here, we reported the CW-laser-pumped lasing from a thin film of CsPbBr₃ quantum dots (QDs) sandwiched by a SiN_x and a Ag thin film and mediated by the whispering gallery modes of a SiO₂ microsphere. The stable photoluminescence from CsPbBr₃ QDs with a quantum efficiency of ∼45% is realized by encapsulating with a thin SiN_x film. Upon CW-laser pumping, lasing from the whispering gallery modes with a threshold of ∼11.6 W/cm² is successfully demonstrated at room temperature. The strong localization of electric field achieved in the particle-on-film system, which is revealed in the numerical simulations and lifetime measurements, plays a crucial role in the realization of the ultralow threshold lasing. Our findings open a new avenue for designing photostable CW-laser-pumped pervoskite lasers.

One-Dimensional Highly-Confined CsPbBr3 Nanorods with Enhanced Stability: Synthesis and Spectroscopy

One-dimensional (1D) colloidal lead halide perovskites (LHPs) have potential as quantum emitters. Their study, however, has been hampered by their previous instability, leaving a gap in our understanding of structure-property relationships in colloidal LHPs with anisotropic shapes. Here, we synthesize stable, highly-confined 1D CsPbBr₃ nanorods (NRs) and demonstrate their structural details and photoluminescence (PL) properties at both the ensemble and single particle levels. Using amino-terminated copolymers, we are able to stabilize and characterize 1D CsPbBr₃ NRs utilizing transmission electron microscopy (TEM) and small angle scattering (SAS). Scanning transmission electron microscopy reveals that these NRs possess structural defects, including twists and inhomogeneity. Solution-phase photon correlation spectroscopy shows low biexciton-to-exciton quantum yield ratios (QY_BX/QY_X) and broad spectral line widths dominated by homogeneous broadening.

Microfluidic Synthesis, Doping Strategy, and Optoelectronic Applications of Nanostructured Halide Perovskite Materials

Halide perovskites are increasingly exploited as semiconducting materials in diverse optoelectronic applications, including light emitters, photodetectors, and solar cells. The halide perovskite can be easily processed in solution, making microfluidic synthesis possible. This review introduces perovskite nanostructures based on micron fluidic channels in chemical reactions. We also briefly discuss and summarize several advantages of microfluidics, recent progress of doping strategies, and optoelectronic applications of light-sensitive nanostructured perovskite materials. The perspective of microfluidic synthesis of halide perovskite on optoelectronic applications and possible challenges are presented.

Thickness-Dependent Dark-Bright Exciton Splitting and Phonon Bottleneck in CsPbBr3-Based Nanoplatelets Revealed via Magneto-Optical Spectroscopy

The optimized exploitation of perovskite nanocrystals and nanoplatelets as highly efficient light sources requires a detailed understanding of the energy spacing within the exciton manifold. Dark exciton states are particularly relevant because they represent a channel that reduces radiative efficiency. Here, we apply large in-plane magnetic fields to brighten optically inactive states of CsPbBr₃-based nanoplatelets for the first time. This approach allows us to access the dark states and directly determine the dark-bright splitting, which reaches 22 meV for the thinnest nanoplatelets. The splitting is significantly less for thicker nanoplatelets due to reduced exciton confinement. Additionally, the form of the magneto-PL spectrum suggests that dark and bright state populations are nonthermalized, which is indicative of a phonon bottleneck in the exciton relaxation process.

Investigation of the Surface Coating, Humidity Degradation, and Recovery of Perovskite Film Phase for Solar-Cell Applications

Presently, we inquire about the organic/inorganic cation effect on different properties based on structure, morphology, and steadiness in preparing a one-step solution of APbI₃ thin films, where A = MA, FA, Cs, using spin coating. This study was conducted to understand those properties well by incorporating device modeling using SCAPS-1D software and to upgrade their chemical composition. X-ray diffraction (XRD) was used to analyze the crystal structures. Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) were conducted to characterize the surface morphology; photoluminescence, Transmission Electron Microscopy (TEM), and a UV-Visible spectrometer helped us to study the optical properties. The (110) plane is where we found the perovskite's crystalline structure. According to the XRD results and by changing the type of cation, we influence stabilization and the growth of the APbI3 absorber layer. Hither, a homogenous, smooth-surfaced, pinhole-free perovskite film and large grain size are results from the cesium cation. For the different cations, the band gap's range, revealed by the optical analysis, is from 1.4 to 1.8 eV. Moreover, the stability of CsPbI3 remains excellent for two weeks and in a ~60% humid environment. Based on the UV-Visible spectrometer and photoluminescence characterization, a numerical analysis for fabricated samples was also performed for stability analysis by modeling standard solar-cell structures HTL/APbI3/ETL. Modeling findings are in good agreement with experimental results that CsPbI3 is more stable, showing a loss % in PCE of 14.28%, which is smaller in comparison to FAPbI3 (44.46%) and MAPbI3 (20.24%).

Ultrafast resonant exciton-plasmon coupling for enhanced emission in lead halide perovskite with metallic Ag nanostructures

Integrating metal halide perovskites onto plasmonic nanostructures has recently become a trending method of enabling superior emissive performance of perovskite nanophotonic devices. In this work, we present an in-depth study on the spontaneous emission properties of hybrid systems comprising CsPbBr₃ nanocrystals and silver nanostructures. Specifically, a 5.7-fold increment of the photoluminescence (PL) intensity and a 1.65-fold enhancement of the PL relaxation rate is attained when the transition energy of CsPbBr₃ is spectrally resonant with the oscillational frequency of Ag nanodisks (NDs), which is attributed to the intense exciton-plasmon coupling-induced Purcell effect. Furthermore, a 540-fs ultrafast energy transfer from the CsPbBr₃ excitons to Ag plasmons is revealed by femtosecond pump-probe experiments, suggesting the key mechanism responsible for the Purcell-enhanced radiative emission. Our finding offers a unique understanding of the enhanced emissive behavior in the plasmon-coupled perovskite system and paves the way for further applications.

Amplified Spontaneous Emission Threshold Dependence on Determination Method in Dye-Doped Polymer and Lead Halide Perovskite Waveguides

Nowadays, the search for novel active materials for laser devices is proceeding faster and faster thanks to the development of innovative materials able to combine excellent stimulated emission properties with low-cost synthesis and processing techniques. In this context, amplified spontaneous emission (ASE) properties are typically investigated to characterize the potentiality of a novel material for lasers, and a low ASE threshold is used as the key parameter to select the best candidate. However, several different methods are currently used to define the ASE threshold, hindering meaningful comparisons among various materials. In this work, we quantitatively investigate the ASE threshold dependence on the method used to determine it in thin films of dye-polymer blends and lead halide perovskites. We observe a systematic ASE threshold dependence on the method for all the different tested materials, and demonstrate that the best method choice depends on the kind of information one wants to extract. In particular, the methods that provide the lowest ASE threshold values are able to detect the excitation regime of early-stage ASE, whereas methods that are mostly spread in the literature return higher thresholds, detecting the excitation regime in which ASE becomes the dominant process in the sample emission. Finally, we propose a standard procedure to properly characterize the ASE threshold, in order to allow comparisons between different materials.

Promoting optoelectronic properties of Cs2AgBiBr6 nanocrystals by formation of heterostructures with BiOCl nanosheets

Lead halide perovskite nanocrystals and their heterostructures have achieved substantial advances in optoelectronics; however, their inherent material instability and lead toxicity have driven research on alternative material systems. Herein, solution-processable heterostructures composed of lead-free double perovskite Cs₂AgBiBr₆ nanocrystals and BiOCl nanosheets were prepared through a colloidal synthesis method. Defect states were present in BiOCl and benefited carrier generation, recombination and transport in Cs₂AgBiBr₆. As a result, the light emission of the Cs₂AgBiBr₆ nanocrystals was greatly enhanced at low temperatures, and the photodetector based on the Cs₂AgBiBr₆/BiOCl heterostructure exhibited a much improved on-off ratio compared to the device based on Cs₂AgBiBr₆ alone. Our work highlights the complex nature and impact of two-dimensional heterostructure assembly on the optoelectronic properties of lead-free double perovskites and demonstrates their great potential toward environmentally friendly optoelectronic devices.

All Optical Switching through Anistropic Gain of CsPbBr3 Single Crystal Microplatelet

Perovskite micro/nanostructures have recently emerged as a highly attractive gain material for nanolasers. To explore their applications and further improve performance, it is essential to understand the optical gain and the anisotropic properties. Herein, we obtained high quality CsPbBr₃ microplatelets (MP) with anisotropic orthorhombic phase. Optical gain of CsPbBr₃ single crystal MP was investigated via microscale variable stripe-length measurement. A polarization-dependent optical gain was observed, and the gain along [002] was larger than that of [1-10]. The behavior was attributed to the lowest energy transition dipole moment of [002] induced by the smaller deviation of Br-Pb-Br bond from the perfect lattice. Along the [002] direction, we obtained the optical gain value up to 5077 cm^-1, which is the record value ever reported. Moreover, all optical switching of lasing is realized by periodical polarized excitation. Our results provide new perceptions in the design of novel functional anisotropic devices based on perovskite micro/nanostructures.

Toward Continuous-Wave Pumped Metal Halide Perovskite Lasers: Strategies and Challenges

Reliable and efficient continuous-wave (CW) lasers have been intensively pursued in the field of optoelectronic integrated circuits. Metal perovskites have emerged as promising gain materials for solution-processed laser diodes. Recently, the performance of CW perovskite lasers has been improved with the optimization of material and device levels. Nevertheless, the realization of CW pumped perovskite lasers is still hampered by thermal runaway, unwanted parasitic species, and poor long-term stability. This review starts with the charge carrier recombination dynamics and fundamentals of CW lasing in perovskites. We examine the potential strategies that can be used to improve the performance of perovskite CW lasers from the materials to device levels. We also propose the open challenges and future opportunities in developing high-performance and stable CW pumped perovskite lasers.

Ultrafast Antisolvent Growth of Single-Crystalline CsPbCl3 Microcavity for Low-Threshold Room Temperature Blue Lasing

All-inorganic perovskite CsPbCl₃ has recently attracted considerable attention due to its great potentials for the development of high-efficiency, deep-blue optoelectronic devices. Particularly, single-crystalline CsPbCl₃ planar microstructures provide good platforms for both fundamental studies and nanophotonics applications from lasers and detectors to amplifiers. In this study, we report an ultrafast antisolvent deposition route to fabricate single-crystalline CsPbCl₃ microplatelets (MPs). The as-grown MPs exhibit uniform morphology, strong emission, and outstanding gain property. Room temperature photoluminescence lasing is realized at 428 nm with a low threshold of 11.5 μJ cm^-2 and high net optical gain up to 720 cm^-1. These findings advance fundamental understanding on the fabrication and optoelectronic applications of low-dimensional CsPbCl₃ perovskite structures.

Pattern-Selective Molecular Epitaxial Growth of Single-Crystalline Perovskite Arrays toward Ultrasensitive and Ultrafast Photodetector

The emergence of organic-inorganic perovskite has provided great flexibility for creating optoelectronic devices with unprecedented performance or unique functionality. However, the perovskite films explored so far have been difficult to be patterned to arrays owing to their poor solvent and moisture stability, which usually lead to serious structural damage of perovskites. The successful preparation of perovskite microarrays with uniform shape and size is more challenging. Here we report a straightforward approach to realize single-crystalline perovskite arrays through a relatively simple pattern-selective molecular epitaxial growth. This approach is applied to create diverse shaped perovskite arrays, such as hexagon, triangle, circle, square, and rectangle. A vertically aligned perovskite photodetector displays both an ultrasensitive and ultrafast photoresponse arising from the reduction in carrier diffusion paths and the high optical absorption. This work demonstrates a general approach to creating perovskite arrays with uniform shape, size, and morphology and provides a rich platform for producing high-performance photodetectors and photovoltage devices.

Conductive Phosphine Oxide Passivator Enables Efficient Perovskite Light-Emitting Diodes

Recently, surface passivation has been proved to be an essential approach for obtaining efficient and stable perovskite light-emitting diodes (Pero-LEDs). Phosphine oxides performed well as passivators in many reports. However, the most commonly used phosphine oxides are insulators, which may inhibit carrier transport between the perovskite emitter and charge-transporter layers, limiting the corresponding device performance. Here, 2,7-bis(diphenylphosphoryl)-9,9'-spirobifluorene (SPPO13), a conductive molecule with two phosphine oxide functional groups, is introduced to modify the perovskite emitting layer. The bifunctional SPPO13 can passivate the nonradiative defects of perovskite and promote electron injection at the interface of perovskite emitter and electron-transporter layers. As a result, the corresponding Pero-LEDs obtain a maximum external quantum efficiency (EQE) of 22.3%. In addition, the Pero-LEDs achieve extremely high brightness with a maximum of around 190 000 cd/m².

Low-Threshold Blue Quasi-2D Perovskite Laser through Domain Distribution Control

Quasi-2D perovskites, composed of self-organized quantum well structures, are emerging as gain materials for laser applications. Here we investigate the influence of domain distribution on the laser emission of CsPbCl_1.5Br_1.5-based quasi-2D perovskites. The use of 2,2-diphenylethylammonium bromide (DPEABr) as a ligand enables the formation of quasi-2D film with a large-n-dominated narrow domain distribution. Due to the reduced content of small-n domains, the incomplete energy transfer from small-n to large-n domains can be greatly addressed. Moreover, the photoinduced carriers can be concentrated on most of the large-n domains to reduce the local carrier density, thereby suppressing the Auger recombination. By controlling the domain distribution, we achieve blue amplified spontaneous emission and single-mode vertical-cavity surface-emitting lasing with low thresholds of 6.5 and 9.2 μJ cm^-2, respectively. This work provides a guideline to design the domain distribution to realize low-threshold multicolor perovskite lasers.

Nanoscale-Resolved Surface-to-Bulk Electron Transport in CsPbBr3 Perovskite

Describing the nanoscale charge carrier transport at surfaces and interfaces is fundamental for designing high-performance optoelectronic devices. To achieve this, we employ time- and angle-resolved photoelectron spectroscopy with ultraviolet pump and extreme ultraviolet probe pulses. The resulting high surface sensitivity reveals an ultrafast carrier population decay associated with surface-to-bulk transport, which was tracked with a sub-nanometer spatial resolution normal to the surface, and on a femtosecond time scale, in the case of the inorganic CsPbBr₃ lead halide perovskite. The decay time exhibits a pronounced carrier density dependence, which is attributed via modeling to enhanced diffusive transport and concurrent recombination. The transport is found to approach an ordinary diffusive regime, limited by electron-hole scattering, at the highest excitation fluences. This approach constitutes an important milestone in our capability to probe hot-carrier transport at solid interfaces with sub-nanometer resolution in a theoretically and experimentally challenging, yet technologically relevant, high-carrier-density regime.

In situ preparation of Mn-doped perovskite nanocrystalline films and application to white light emitting devices

Mn-doped perovskite nanocrystals have promised new optoelectronic applications due to their unique material properties. In the present study, Mn-doped perovskite nanocrystalline films were prepared in situ in a polymer matrix. The Mn-doped perovskite nanocrystals (PNCs) had good crystallinity and uniform size/spatial distributions in the polymer film. Bright dual-color emission and the long lifetime of the excited state of the dopant were observed from the host exciton and the Mn²⁺ dopant, respectively. Furthermore, magnetism was observed in the optimal Mn²⁺ concentration, implying that magnetic coupling was achieved in the Mn-doped perovskite lattice. The Mn-doped perovskite films also showed superior stability against moisture. To demonstrate the practicality of this composite film, a white light emitting device was fabricated by combining a single composite film with a blue light emitting diode; the device showed a high-quality white light emission, and the Commission Internationale De L'Eclairage (CIE) chromaticity coordinate of the white light emitting diode (WLED) (0.361, 0.326) was close to the optimal white color index. In this single-layer WLED, self-absorption among the luminous multilayers in traditional white light emitting diodes can be avoided. The study findings revealed that Mn-doped perovskite nanocrystalline films have many exciting properties, which bodes well for the fundamental study and design of high-performance optoelectronic devices.

Light Emission Properties of Thermally Evaporated CH3NH3PbBr3 Perovskite from Nano- to Macro-Scale: Role of Free and Localized Excitons

Over the past decade, interest about metal halide perovskites has rapidly increased, as they can find wide application in optoelectronic devices. Nevertheless, although thermal evaporation is crucial for the development and engineering of such devices based on multilayer structures, the optical properties of thermally deposited perovskite layers (spontaneous and amplified spontaneous emission) have been poorly investigated. This paper is a study from a nano- to micro- and macro-scale about the role of light-emitting species (namely free carriers and excitons) and trap states in the spontaneous emission of thermally evaporated thin layers of CH₃NH₃PbBr₃ perovskite after wet air UV light trap passivation. The map of light emission from grains, carried out by SNOM at the nanoscale and by micro-PL techniques, clearly indicates that free and localized excitons (EXs) are the dominant light-emitting species, the localized excitons being the dominant ones in the presence of crystallites. These species also have a key role in the amplified spontaneous emission (ASE) process: for higher excitation densities, the relative contribution of localized EXs basically remains constant, while a clear competition between ASE and free EXs spontaneous emission is present, which suggests that ASE is due to stimulated emission from the free EXs.

Advancing 2D Perovskites for Efficient and Stable Solar Cells: Challenges and Opportunities

Perovskite solar cells (PSCs) have rapidly emerged as one of the hottest topics in the photovoltaics community owing to their high power-conversion efficiencies (PCE), and the promise to be produced at low cost. Among various PSCs, typical 3D perovskite-based solar cells deliver high PCE but they suffer from severe instability, which restricts their practical applications. In contrast to 3D perovskites, 2D perovskites that incorporate larger, less volatile, and generally more hydrophobic organic cations exhibit much improved thermal, chemical, and environmental stability. 2D perovskites can have different roles within a solar cell, either as the primary light absorber (2D PSCs), or as a capping layer atop a 3D perovskite absorbing layer (2D/3D PSCs). Tradeoffs between PCE and stability exist in both types of PSCs-2D PSCs are more stable but exhibit lower efficiency while 2D/3D PSCs deliver exciting efficiency but show relatively poor stability. To address this PCE/stability tradeoff, the challenges both the 2D and 2D/3D PSCs face are identified and select works the community has undertaken to overcome them are highlighted in this review. It is ended with several recommendations on how to further improve PSCs so their performance and stability can be commensurate with application requirements.

Highly Tunable Enhancement and Switching of Nonlinear Emission from All-Inorganic Lead Halide Perovskites via Electric Field

Herein, we demonstrate a highly tunable enhancement and switching of nonlinear emission from all-inorganic metal halide perovskites based on an asymmetrically biased metal-insulator-semiconductor (MIS) structure. We achieve 2 orders of magnitude enhancement of the two-photon-pumped photoluminescence (TPL) from CsPbBr₃ microplates with the MIS structure, due to comprehensive effects including localized field effect, trap-filling effect, and collection enhancement. In particular, taking advantage of electric-field-induced passivation/activation of Br vacancies, we realize highly tunable TPL enhancement, ranging from ∼61.2-fold to ∼370.3-fold. Moreover, we demonstrate an efficient modulation of the two-photon-pumped lasing from the MIS structure, which exhibits electric field induced switching with a high on/off ratio of 67:1. This work has opened new avenues for steering carrier transport and nonlinear emission in lead halide perovskites, which shows great promise for realizing high-efficiency and tunable nonlinear nanophotonic devices.

Surface plasmon coupling regulated CsPbBr3 perovskite lasers in a metal-insulator-semiconductor structure

A strong coupling effect often occurs between a metal and semiconductor, so micro/nano-lasers based on surface plasmons can break through the optical diffraction limit and realize unprecedented linear and nonlinear enhancement of optical processes. Hence, metal–insulator–semiconductor (M–I–S) structures based on perovskite materials were explored to design optoelectronic devices. Herein, we constructed an Ag/SiO₂/CsPbBr₃ hybrid structure to generate surface plasmon coupled emission between the metal and CsPbBr₃ perovskite. Combined with experimental characterization and COMSOL Multiphysics software simulations, the best enhancement for CsPbBr₃ radiative recombination efficiencies can be achieved with a 10 nm-thickness of the SiO₂ layer and 80 nm-thickness of the Ag metal film, further verified by optimizing the thickness of the SiO₂ layer above the Ag metal film. In this state, the laser threshold can be as low as 0.138 μW with a quality (Q) factor of up to 3907 under optical pumping, which demonstrate a significant step toward practical applications in biological technology, chemical identification, and optical interconnections of information transmission.

A strong coupling effect often occurs between a metal and semiconductor, so micro/nano-lasers based on surface plasmons can break through the optical diffraction limit and realize unprecedented linear and nonlinear enhancement of optical processes.

Optical Probing of Crystal Lattice Configurations in Single CsPbBr3 Nanoplatelets

Quantum-confined nanostructures of CsPbBr₃ with luminescence quantum efficiencies approaching unity have shown tremendous potential for lighting and quantum light applications. In contrast to CsPbBr₃ quantum dots, where the fine structure of the emissive exciton state has been intensely discussed, the relationship among lattice orientation, shape anisotropy, and exciton fine structure in lead halide nanoplatelets has not yet been established. In this work, we investigate the fine structure of the bright triplet exciton of individual CsPbBr₃ nanoplatelets by polarization-resolved micro- and magnetophotoluminescence spectroscopy at liquid helium temperature and find a large zero-field splitting of up to 2.5 meV. A unique relation between the crystal structure and the photoluminescence emission confirms the existence of two distinct crystal configurations in such nanoplatelets with different alignments of the crystal axes with respect to the nanoplatelet facets. Polarization-resolved experiments eventually allow us to determine the absolute orientation of an individual nanoplatelet on the substrate purely by optical means.

Current status on synthesis, properties and applications of CsPbX3(X = Cl, Br, I) perovskite quantum dots/nanocrystals

The quantum confinement effect and interesting optical properties of cesium lead halide (CsPbX₃; X = Cl, Br, I) perovskite quantum dots (QDs) and nanocrystals (NCs) have given a new horizon to lighting and photonic applications. Given the exponential rate at which scientific results on CsPbX₃NCs are published in the last few years, it can be expected that the research in CsPbX₃NCs will further receive increasing scientific interests in the near future and possibly lead to great commercial opportunities to realize these materials based practical applications. With the rapid progress in the single-photon emitting CsPbX₃QDs and NCs, practical applications of the quantum technologies such as single-photon emitting light-emitting diode, quantum lasers, quantum computing might soon be possible. But to reach at cutting edge of stable perovskite QDs/NCs, the study of fundamental insight and theoretical aspects of crystal design is yet insufficient. Even more, it has aroused many unanswered questions related to the stability, optical and electronic properties of the CsPbX₃QDs. Aim of the present review is to illustrate didactically a precise study of recent progress in the synthesis, properties and applications of CsPbX₃QDs and NCs. Critical issues that currently restrict the applicability of these QDs will be identified and advanced methodologies currently in the developing queue, to overcome the roadblock, will be presented. And finally, the prospects for future directions will be provided.

Perovskite semiconductors for room-temperature exciton-polaritonics

Lead-halide perovskites are generally excellent light emitters and can have larger exciton binding energies than thermal energy at room temperature, exhibiting great promise for room-temperature exciton-polaritonics. Rapid progress has been made recently, although challenges and mysteries remain in lead-halide perovskite semiconductors to push polaritons to room-temperature operation. In this Perspective, we discuss fundamental aspects of perovskite semiconductors for exciton-polaritons and review the recent rapid experimental advances using lead-halide perovskites for room-temperature polaritonics, including the experimental realization of strong light-matter interaction using various types of microcavities as well as reaching the polariton condensation regime in planar microcavities and lattices.

Electrical Pumping of Perovskite Diodes: Toward Stimulated Emission

The success of metal halide perovskites in photovoltaic and light-emitting diodes (LEDs) motivates their application as a solid-state thin-film laser. Various perovskites have shown optically pumped stimulated emission of lasing and amplified spontaneous emission (ASE), yet the ultimate goal of electrically pumped stimulated emission has not been achieved. As an essential step toward this goal, here, a perovskite diode structure that simultaneously exhibits stable operation at high current density (≈1 kA cm-2 ) and optically excited ASE (with a threshold of 180 µJ cm-2 ) is reported. This diode structure achieves an electroluminescence quantum efficiency of 0.8% at 850 A cm-2 , which is estimated to be ≈3% of the charge carrier population required to reach ASE in the same device. It is shown that the formation of a large angle waveguide mode and the reduction of parasitic absorption losses are two major design principles for diodes to obtain a positive gain for stimulated emission. In addition to its prospect as a perovskite laser, a new application of electrically pumped ASE is proposed as an ideal perovskite LED architecture allowing 100% external radiation efficiency.

Imaging and Controlling Photonic Modes in Perovskite Microcavities

Perovskite microcavities have excellent photophysical properties for integrated optoelectronic devices, such as nanolasers. Imaging and controlling the photonic modes within the cavity are fundamentally important to understand and develop applications. Here, photoemission electron microscopy (PEEM) is used to image the photonic modes within optical microcavities with a nanometer-scale spatial resolution. From a CsPbBr₃ microcavity, hybrid mode patterns are observed. Spatial frequency spectrum analysis on the patterns uncovers the characteristic cavity modes, which are modeled with transverse magnetic (TM) and transverse electric (TE) waves, and assigned to exciton-polariton modes. Based on this understanding, the light focus in a designed microcavity is imaged in real space and controlled by the light field polarization. The study confirms that the cavity modes in perovskites can be effectively observed by the PEEM technique under resonant excitation, which, in turn, promotes the design of optoelectronic devices based on perovskite microcavities.

Nonlinear Parametric Scattering of Exciton Polaritons in Perovskite Microcavities

Comparing with pure photons, higher nonlinearity in polariton systems has been exploited in various proof-of-principle demonstrations of efficient optical devices based on the parametric scattering effect. However, most of them demand cryogenic temperatures limited by the small exciton binding energy of traditional semiconductors or exhibit weak nonlinearity resulting from Frenkel excitons. Lead halide perovskites, possessing both a large binding energy and a strong polariton interaction, emerge as ideal platforms to explore nonlinear polariton physics toward room temperature operation. Here, we report the first observation of nonlinear parametric scattering in a lead halide perovskite microcavity with multiple polariton branches at room temperature. Driven by the scattering source from condensation in one polariton branch, correlated polariton pairs are obtained at high k states in an adjacent branch. Our results strongly advocate the ability to reach the nonlinear regime essential for perovskite polaritonics working at room temperature.

An electrically driven whispering gallery polariton microlaser

Near-infrared micro/nanolaser devices utilizing low-dimensional semiconductors can provide essential building blocks to achieve integrated optoelectronic devices and circuitry for advanced functionalities and are compatible with on-chip technologies. Although significant progress has been made through using narrow-band semiconductor micro/nanostructures to realize near-infrared stimulated radiation at room temperature, severe challenges still remain involving much lower quantum efficiencies and higher auger recombination. Herein, we report an experimental realization of a current-injection semiconductor polariton device made of a ZnO microwire via Ga-doping (ZnO:Ga MW) and p-type GaAs template. The device can emit polaritonic illumination directly from sharp edges of the hexagonal MW. The experimental results of angle-resolved electroluminescence measurements reveal a typical anticrossing feature between excitons and cavity modes, unambiguous evidence of the strong exciton-polariton coupling, with corresponding Rabi splitting energy extracted to be about 195 meV. As the applied bias goes above a certain value, electrically driven whispering gallery lasing action was achieved in the near-infrared spectrum, and the lasing features can be assigned to the exciton-polariton effect. The results not only can afford insights into the development of low-threshold coherent light sources via the exciton-polariton effect, but also can expand the fabrication of low-dimensional, near-infrared microlaser devices.

Halide Perovskite Semiconductor Lasers: Materials, Cavity Design, and Low Threshold

Solution-processable semiconductor lasers have been a long-standing challenge for next-generation displays, light sources, and communication technologies. Metal halide perovskites, which combine the advantages of inorganic and organic semiconductors, have recently emerged not only as excellent candidates for solution-processable lasers but also as potential complementary gain materials for filling the "green gap" and supplement industrial nanolasers based on classic II-VI/III-V semiconductors. Numerous perovskite lasers have been developed successfully with superior performance in terms of cost-effectiveness, low threshold, high coherence, and multicolor tunability. This mini review surveys the development, current status, and perspectives of perovskite lasers, categorized into thin film lasers, nanocrystals lasers, microlasers, and device concepts including polariton and bound-in-continuum lasers with a focus on material fundamentals, cavity design, and low-threshold devices in addition to critical issues such as mass fabrication and applications.